installation guide abi in-wall toilet cistern
TRANSCRIPT
A B I I N -WA L L TO I L E T C I ST E R N
S P EC I F I C AT I O N S
I N STA L L AT I O N G U I D E
M AT E R I A L
I N STA L L AT I O N
WA R R A N T Y
W E L S
WAT E R M A R K
S t r u c t u r e : 5 y e a r s | S p a r e Pa r t s : 2 Ye a r s
W M K A 2 0 0 8 0
L 0 2 6 3 1 – 4 - S t a r, H a l f F l u s h : 3 S t a r, Fu l l F l u s h : 4 . 5 , N o m i n a l Av e r a g e F l u s h : 3 . 3
D o m e s t i c
I n -Wa l l
H D P E P l a s t i c
Description
P A R T S L I S T
Expansion Screw
Determine the position of 1m line and the position of drilling holes
Note: Follow the practical location of iron bracket to drill properly
Cistern Fixing Clip
Angle Valve
Cistern Cover
Plastic Holder
Flush Pipe
Tube Cover
Piping Cover
Straight Tube
Fixation of concealed cistern
Fill valve inlet and shut-off
Airproof tank and mounting of locking
To reserve space for installation of actuator at wall buildingTo prevent dust and impurities into tank at wall building
Water inlet to ceramic bowl
To protect flush pipe
To reserve space for straight tube and flush pipe
To join cistern into ceramic bowl (cutting in accordance with wall thickness)
1. Please adhere to the following installation instructions.We shall not be responsible for failures and loss that are contributed to improper installation.2. Please confirm the fixation location of cistern prior to installation and obtain the finished floor surface. Draw FEL on installation wall and follow it as baseline from ZERO (0) level.3. The instructions have been composed based on the latest product specifications. We reserve the right to make mod-ifications to the packaging and specifications without providing prior notification
Qty FunctionNo.
1 1
1
1
1
1
1
1
2
2
2
3
4
5
6
7
8
9
1
R EC O M M E N D E D U S E
2
4
5
6
7
3Drilling and installation of expansion screw
Installation of flush pipe
Mounting of installation accessories
Wall thickness range 20-60mm (from outer exterior of cistern foam cover to finished decorated surface)
Mounting of ceramic bowl
Installation of concealed cistern
Piping stopper 1# (to reserve space for flushing piping at wall building)
Plastic holder (to reserve space for installation actuator at wall building. To prevent dust impurities into tank at wall building)
The internal flushing mechanism are already well-assembled and above picture only for reference
8 Internal flushing mechanism assembly drawing
Disclaimer: Products in this specif ication manual must by regulation be instal led by l icensed and registered trade people. The manufacturer/distr ibutor reser ves the r ight to var y specif ications or delete models from their range without prior notif ication. Dimensions are nominal measurements only. Dimensions and set-outs l isted are correct at t ime of publication however the manufacturer/distr ibutor
takes no responsibi l ity for printing errors. All ABI Products are designed in Austral ia. Copyright ABI Interiors 2019. WWW.ABIINTERIORS.COM.AU