Install Windows 7 from a USB drive the very easy way

The fastest way to installwindows 7 is from abootable usb drive. You can cut the

install time down to around 15 minutes compared with 30-40 via DVD if you use a fast

drive.

People still asking me to explain what is the best way to do this as many of the guides

online are too complex, or require third party software which doesn’t always work as

they supposed to.

With this BootableUSB guide all you need to ensure is that your motherboard

supports USB booting, and this is a common feature now for most of the computers.

Today I am going to publish a step by step guide which works perfectly and doesn’t

require any additional tools – I have been doing it for some time now to create bootable

Windows install drives.

You need to get hold of a fast USB 2.0 flash drive. It doesn’t need to be 32GB or

bigger,however, all you need is a 4GB unit. The faster it is, the better.

What you need:

- Windows 7 DVD install disc or ISO image

- USB Drive (4GB+ and as fast as you can get)

- Running Windows Operating system

- Working set of hands and eyes

- A few minutes of your life

Plug in your USB drive in the USB port:

Before going any further, make sure you have removed any important files on your drive

to a safe location, what we are about to do next is to erase the entire contents of the

drive.

Insert your DVD of Windows 7 into the computer, but don’t start the normal install

process.

Open your ‘My Computer’ and make a note of the drive numbers of both the USB drive

and the DVD drive with Windows 7 files on it.

 

As you can see from the image above, the DVD drive is drive has letter D assigned and

the USB drive is E.

Open the command prompt with admin rights. Type cmd in Start menu search box and

hit Shift+Ctrl+Enter.

To keep things really easy, if you see text in upper case, it means this is what you type

into the command prompt (you don’t need to type in upper case).

 

Next type

DISKPARTthis loads the diskpart application we need to proceed

Then type

LIST DISKthe image above shows our 32 GB USB drive is listed as DISK 2

so you have to type

SELECT DISK 2 (your USB Drive may have a different number, don’t follow exactly this

text it depends on your usb drive)

You will get a successful response “Disk 2 is now the selected disk”

Next we want to clean the USB drive

Type:

CLEANyou will get a successful response ‘DiskPart succeeded in cleaning the disk”.

 

After   the drive is cleaned follow the list in the image above (detailed below in list order)

– you can also note the successful text responses from the OS as you enter each

command.

SELECT DISK 2 (or what number your USB drive has)

CREATE PARTITION PRIMARYSELECT PARTITION 1ACTIVEFORMAT FS=NTFSFormatting can take a little time depending on the size of the drive, our 32GB unit took

about 10 minutes to format - you will see a percentage readout until it is finished.

Next type:

ASSIGNEXIT (DISK PART will exit)

Type D: CD BOOT (substitute the “D” if necessary with the letter of your Windows 7

DVD drive)

then key

CD BOOTthen

BOOTSECT.EXE /NT60 E: (substitute the “E” if necessary with the letter of your now

ready USB drive) – we are telling the system to create a boot sector file on the USB

drive.

Now you can exit the command prompt and copy all the files on the Windows 7 DVD to

the USB drive.

Once this step is finished you’ll be ready to boot from this drive, all you need to do is

configure your motherboard bios setup to boot first from USB rather than hard drive or

optical drive. If you don’t know how to do this, refer to your specific motherboard manual

or search the internet.

Now, Windows 7 installation should take between 40% and 60% of the time it does from

the DVD disc.

Last step: Drink a cup of tea, from now on you can do this again and again