install subsurface drip irrigation (sdi) or waste water ...sdi) or waste water recycling systems ....

5
www.trenchnedge.com This job took “1.5 hours including a break for an iced coffee” -Andrew Walladge from Berri Na- tive Plants in Berri, Australia, de- scribing an SDI installation job us- ing the TRENCH’N edge Trencher. “Cut clean uniform trenches with the TRENCH’N edge Trencher .” SDI step by step installation using the TRENCH’N edge Trencher. Before After Install Subsurface Drip Irrigation (SDI) or Waste Water Recycling Systems

Upload: ngokien

Post on 18-Mar-2018

214 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Install Subsurface Drip Irrigation (SDI) or Waste Water ...SDI) or Waste Water Recycling Systems . On site - Berri, Australia Step by Step ... Installing the “KISSS Be-low Flow Flat

www.trenchnedge.com

This job took “1.5 hours including a break for an iced coffee” -Andrew Walladge from Berri Na-

tive Plants in Berri, Australia, de-scribing an SDI installation job us-ing the TRENCH’N edge Trencher.

“Cut clean uniform trenches with the TRENCH’N edge Trencher.”

SDI step by step installation using the TRENCH’N edge Trencher.

Before

After

Install Subsurface Drip Irrigation (SDI) or Waste Water Recycling Systems

Page 2: Install Subsurface Drip Irrigation (SDI) or Waste Water ...SDI) or Waste Water Recycling Systems . On site - Berri, Australia Step by Step ... Installing the “KISSS Be-low Flow Flat

On site - Berri, Australia

Step by Step

First trench – blow onto tarps and hold trench material for use filling the final trench.

Second Trench – Blow the trenched material directly into the first trench, after you have installed the SDI line.

Continue blowing the trenched material directly into each of the previous holes after you install the SDI line.

Prepare site and measure distance be-tween irrigation lines depending on soil type.

Page 3: Install Subsurface Drip Irrigation (SDI) or Waste Water ...SDI) or Waste Water Recycling Systems . On site - Berri, Australia Step by Step ... Installing the “KISSS Be-low Flow Flat

Finish trenching by keeping your proper spacing for the type of soil.

Make your final hook-up with the feeder line (Main Line).

Finish by compacting the trenched areas.

Finalize the clean-up, top dress and reseed as needed.

On site - Berri, Australia

Step by Step

Page 4: Install Subsurface Drip Irrigation (SDI) or Waste Water ...SDI) or Waste Water Recycling Systems . On site - Berri, Australia Step by Step ... Installing the “KISSS Be-low Flow Flat

On Site - San Antonio, Texas

Cutting Through Hard Compacted Soil

Installing the “KISSS Be-low Flow Flat system” in Texas. “In Narrow medi-ans often times you have a lot of concrete flashing that has oozed under the forms that you hit. With a traditional trencher it is dangerous because the trencher can jump around and injure you. On this site the TRENCH’N edge chewed though this stuff like a champ” said Bruce Hayes, Irrigation Contrac-tor.

Page 5: Install Subsurface Drip Irrigation (SDI) or Waste Water ...SDI) or Waste Water Recycling Systems . On site - Berri, Australia Step by Step ... Installing the “KISSS Be-low Flow Flat

TRENCH’N edge™

1-800-483-3437 | www.trenchnedge.com [email protected] For the Edge, Inc. 8028 Hill Trail North, Lake Elmo, MN 55042, USA (651) 777-7923 US Patent No. US05964049

On site - Wiltshire, UK

Trenching Without Leaving a Mark

This irrigation project was com-pleted at a high end estate in the UK, using the TRENCH’N edge Trencher.

“My customers demand the highest quality installation. TRENCH’N edge is the only trencher that makes my job simple and keeps my job sites clean.” said Andy Lovegrove, Irrigation Con-tractor.