install network

8/14/2019 Install Network

1/13

Installing and Configuring your Network Card

Introduction

You must have installed and configured a Network (Ethernet) card

in your computer before you configure your computer. Please see

the Network (Ethernet) card specification for more details.

If you are installing an Ethernet card yourself follow the

instructions provided with the card to configure it for use with your

Operating system.


2/13

Before you continue with the installation check in the Control

Panel to ensure that the card is working correctly.

1. Click on the Start button and select Settings then Control

Panel.

2. Double click on the System icon.

3. Click on the Hardware tab.

4. Click on Device Manager.

5. You will see a list of devices installed in your computer.


3/13

7. Ensure that there is no yellow exclamation mark (!) next to the

Network Adapter. This indicates a possible problem with the card

or configuration.

8. Double click on your network driver (e.g. NE2000 Compatible).

9. In the Device Status box you should see the message:This Device is working correctly.

6. If necessary, click on the + sign next to Network Adapters to

expand the list.

If you do not see this message or if there is no Network Adapter displayed, then

your Ethernet card will probably need configuring.


4/13

Network (TCP/IP) Configuration

You must have an installed and configured network (Ethernet)

card in your computer before you configure your computer to use

the network.

Ensure that your Ethernet cable is plugged into your computer and

the network socket on your wall.


5/13

1. Click on the Start button and select Control Panel then

Network and Internet Connections.

Note: These instructions assume that your control panel is in the default

"category view". If the control panel is in "classic view" please click

"switch to category view" in the top left-hand corner of the control panel

window.


6/13

2. Click Network and Internet Connections.

3. Right click on the Local Area Connection icon and select

Properties.

4. If you don't have the Local Area Connection icon it is probably

because your network card is not installed and configured

correctly (See Step 1).

5. Select Internet Protocol (TCP/IP).


7/13

6. Click on the Properties button.


8/13

7. Check that Use the following IP address, and Obtain DNS

server address automatically are both selected.


9/13


10/13

13. Click on See basic information about your computer.


11/13

14. Select the Computer Name tab.


12/13

15. Click the Change button.

16. In the Computer name box enter desired Computer Name

(eg. Jannoeys PC).


13/13

17. Change the Workgroup to wherever you want to be a

member of (eg. Domain123.

18. Click OK.

19. Reboot when prompted.

Your computer is now configured to use the TCP/IP protocol on

the network.

install network

Documents