install guide oem-al(rs)-ni9-[ads-alca]-en...2020/03/24 · patent no. us 8,856,780 ca 2759622 3 3...
TRANSCRIPT
-
REVISION DATE20200324
DOCUMENT NUMBER
TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of auto-motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
BEFORE INSTALLATION1- Connect module to computer2- Login to Weblink account3- Flash firmware to module (module is not preloaded with firmware)4- Use accessories accordingly (accessories are sold separately)
Patent No. US 8,856,780 CA 2759622
INSTALL GUIDEOEM-AL(RS)-NI9-[ADS-ALCA]-EN
HARDWAREADS-ALCA
ACCESSORIESADS-USB (REQUIRED)
FIRMWAREOEM-AL(RS)-NI9-[ADS-ALCA]
www.idatalink.comAutomotive Data Solutions Inc. © 2020
70282
-
Patent No. US 8,856,780 CA 2759622
VEHICLE LIST - 1 OF 1M
AK
E
MO
DEL
YEA
R
INST
ALL
TYP
E
FEATURES
DAT
A IM
MO
BIL
IZER
BYP
ASS
SEC
UR
E TA
KEO
VER
PAR
KIN
G L
IGH
T CT
RL
3X L
OC
K R
EMO
TE S
TAR
T
AR
M O
EM A
LAR
M
DIS
AR
M O
EM A
LAR
M
DO
OR
LO
CK
DO
OR
UN
LOC
K
RA
P S
HU
TDO
WN
CTR
L
DO
OR
STA
TUS
MO
NIT
OR
ING
TRU
NK
STA
TUS
MO
NIT
OR
ING
BR
AK
E P
EDA
L ST
ATU
S M
ON
ITO
RIN
G
TAC
HO
MET
ER S
TATU
S M
ON
ITO
RIN
G
HO
RN
CTR
L
NIS
SAN
Qashqai STD Key AT 17-18 2 • • • • • • • • • • • • • •
Qashqai STD Key AT 19-20 3 • • • • • • • • • • • • • •
Rogue STD Key AT 14-16 1 • • • • • • • • • • • • • •
Rogue STD Key AT 17 2 • • • • • • • • • • • • • •
Rogue STD Key AT 18-20 3 • • • • • • • • • • • • • •
Rogue Sport STD Key AT 17-18 2 • • • • • • • • • • • • • •
Rogue Sport STD Key AT 19-20 3 • • • • • • • • • • • • • •
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 2 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 3 OF 19• 20200324
BOX CONTENTS - 1 OF 1
21
3
21
3
34
21
76
9
54321
10
845
2
67
1
3
45
2
6
1
3
D
C
B
A
F
E
PROGRAMMINGBUTTON
LED 1
BLACKDATA PORT(WEBLINK, RF, TELEMATIC)
BLUE
WHITE
WHITE
WHITE
BLACK
6 PIN WHITE CONNECTOR
7 PIN WHITE CONNECTOR
MODULE 4 PIN BLACK CONNECTOR
10 PIN BLACK CONNECTOR
DATA CABLE 1
DATA CABLE 2
3 PIN WHITE CONNECTOR
3 PIN BLUE CONNECTOR
BOX CONTENTS
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULEDATA PORT
DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
A
B
COMPONENT LOCATOR - 1 OF 1
INTERIOR VIEW
DRIVER SIDE VIEW PASSENGER SIDE VIEW
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 4 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
TYPE 1 - WIRE CHART - 1 OF 1M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
NIS
SAN Rogue
STD keyAT
14-16
CanH OBDII White 16 pin 06 Blue (DATA) At OBDII connector B
CanL OBDII White 16 pin 14 Pink (DATA) At OBDII connector B
Negative Ignition 1 M18 Gray 40 pin 27 Yellow (-) At BCM A
Negative Ignition 2 M18 Gray 40 pin 28 LtPurple/White or Green/White (-) At BCM A
Negative Ignition 3 M18 Gray 40 pin 25 Brown (-) At BCM A
Ignition OBDII White 16 pin 08 Yellow (+) At OBDII connector B
12V OBDII White 16 pin 16 White (+) At OBDII connector B
Unlock M19 Black 40 pin 13 Pink (-) At BCM A
Lock M19 Black 40 pin 12 Brown (-) At BCM A
Power Liftgate ~ Green 08 pin 06 LtGreen (-) At switch, on lower dash panel A
Ground OBDII White 16 pin 04 Black (-) At OBDII connector B
Negative Starter E29 Black 24 pin 19 Green (-) At BCM A
Hazard Light M18 Gray 40 pin 11 Yellow (-) At BCM A
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 5 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
3
3
M6
M1
M2M3M4 M5 DATA
M1
M2
M3
M4
M5
M5
M6
1717 1616 1515 1414 1313 12122020 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535
13 12
3434 3333 32324040 3939 3838 2828 2727 2626 252525 2424 23233131 3030 2929 2222 2121
1717 1616 1515 1414 1313 12122020 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535 3434 3333 32324040 3939 3838 28 27 2626 25
11
2424 23233131 3030 2929 2222 2121
1212 1111 1010 99 88 44 33 22 1177 66 55
2424 2323 2222 2121 2020 1616 1515 1414 1313191919 1818 1717
10 11 12 13 14 15 16
1 2 3 4 5 6
14 16
4 6 7 88
9
3
24
12348 7 6 5
1
1
1
1
5A
OROR
WITHOUT ACOMPATIBLEACCESSORY
WITHOUT ACOMPATIBLEACCESSORY
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
COMPATIBLEACCESSORY
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
HOOD SWITCH
TYPE 1 - WIRING DIAGRAM - 1 OF 1
GRAY/YELLOW (NC)01 GRAY/YELLOW (NC)02 GRAY/RED - LOCK (-) OUTPUT
GREEN/YELLOW (NC)03 GREEN/YELLOW (NC)04 GREEN/RED - UNLOCK (-) OUTPUT
STARTER (-) OUTPUT05 BLUE/YELLOW - STARTER (-) OUTPUTGROUND (-) INPUT06 BLUE/RED - GROUND (-) INPUT
PINK - IGNITION (+) INPUT01 PINK - IGNITION (+) INPUT PINK/BLACK (NC)02 PINK/BLACK (NC)
05 ORANGE/BLACK (NC) BROWN/YELLOW - CANL06 BROWN/YELLOW - CANL
01 WHITE - GROUND (-) INPUT
BROWN/RED - CANH07 BROWN/RED - CANH
04 ORANGE/WHITE - TRUNK (-) OUTPUT
HAZARD LIGHT (-) - 11
STARTER (-) - 19
03 RED/WHITE (NC)02 BLUE/BLACK (NC)
04 BROWN (NC)
06 PURPLE/BLACK (NC)05 PURPLE/YELLOW (NC)
WHITE 07 WHITE (NC)08 BLACK/WHITE (NC)
10 PURPLE/WHITE (NC)
02 YELLOW/RED (NC)03 YELLOW/BLACK (NC)
01 YELLOW (NC)
CANL - 14
POWER LIFTGATE (-) - 06
IGNITION 3 (-) - 25
IGNITION 1 (-) - 27
IGNITION 2 (-) - 28
LOCK/ARM (-) - 12
UNLOCK/DISARM (-) - 13
CANH - 06
OBDII CONNECTOR (UNDER DRIVER SIDE DASH)
BCM (LEFT OF STEERING COLUMN)
POWER LIFTGATE SWITCH
IGNITION (+) - 08
GROUND (-) - 04
12V (+) - 16
09 GREEN - PARKING LIGHT (-) OUTPUT
DATA CABLE
02 WHITE (NC)03 BLACK - GROUND04 RED - 12V (+)
01 BLUE/WHITE (NC)
CONNECT ONLY WHENUSING A COMPATIBLE ACCESSORY
03 ORANGE (NC)
01 GREEN/BLACK - HOOD STATUS (-) INPUT
3 : M19 BLACK
GREEN
4 : M18 GRAY
2 : E29 BLACK
OEM REMOTEREMAINS FUNCTIONALDURING REMOTE START SEQUENCE
1
03 WHITE/BLACK - IGNITION (-) OUTPUT02 WHITE/RED (NC)
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 6 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
TYPE 2 - WIRE CHART - 1 OF 2M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
NIS
SAN
QashqaiSTD KeyAT
17-18
CanH ~ Green 40 pin 20 Blue (DATA) At BCM A
CanL ~ Green 40 pin 40 Pink (DATA) At BCM A
Negative Ignition 1 M18 Gray 40 pin 27 LtPurple/LtGreen (-) At BCM A
Negative Ignition 2 M18 Gray 40 pin 28 LtPurple/Blue (-) At BCM A
Negative Ignition 3 M18 Gray 40 pin 25 LtPurple/Pink (-) At BCM A
Ignition OBDII White 16 pin 08 Yellow (+) At OBDII connector B
12V OBDII White 16 pin 16 White (+) At OBDII connector B
Unlock M19 Black 40 pin 13 Pink (-) At BCM A
Lock M19 Black 40 pin 12 Brown (-) At BCM A
Power Liftgate ~ Green 08 pin 06 LtGreen (-) At switch, on lower dash panel A
Ground OBDII White 16 pin 04 Black (-) At OBDII connector B
Negative Starter E29 Black 24 pin 19 Blue (-) At BCM A
Hazard Light M18 Gray 40 pin 11 LtPurple/Yellow (-) At BCM A
RogueSTD KeyAT
17
CanH ~ Green 40 pin 20 Blue (DATA) At BCM A
CanL ~ Green 40 pin 40 Pink (DATA) At BCM A
Negative Ignition 1 M18 Gray 40 pin 27 Yellow (-) At BCM A
Negative Ignition 2 M18 Gray 40 pin 28 LtPurple/White or Green/White (-) At BCM A
Negative Ignition 3 M18 Gray 40 pin 25 Brown (-) At BCM A
Ignition OBDII White 16 pin 08 Yellow (+) At OBDII connector B
12V OBDII White 16 pin 16 White (+) At OBDII connector B
Unlock M19 Black 40 pin 13 Pink (-) At BCM A
Lock M19 Black 40 pin 12 Brown (-) At BCM A
Power Liftgate ~ Green 08 pin 06 LtGreen (-) At switch, on lower dash panel A
Ground OBDII White 16 pin 04 Black (-) At OBDII connector B
Negative Starter E29 Black 24 pin 19 Green (-) At BCM A
Hazard Light M18 Gray 40 pin 11 Yellow (-) At BCM A
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 7 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
TYPE 2 - WIRE CHART - 2 OF 2M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
NIS
SAN Rogue Sport
STD KeyAT
17-18
CanH ~ Green 40 pin 20 Blue (DATA) At BCM A
CanL ~ Green 40 pin 40 Pink (DATA) At BCM A
Negative Ignition 1 M18 Gray 40 pin 27 LtPurple/LtGreen (-) At BCM A
Negative Ignition 2 M18 Gray 40 pin 28 LtPurple/Blue (-) At BCM A
Negative Ignition 3 M18 Gray 40 pin 25 LtPurple/Pink (-) At BCM A
Ignition OBDII White 16 pin 08 Yellow (+) At OBDII connector B
12V OBDII White 16 pin 16 White (+) At OBDII connector B
Unlock M19 Black 40 pin 13 Pink (-) At BCM A
Lock M19 Black 40 pin 12 Brown (-) At BCM A
Power Liftgate ~ Green 08 pin 06 LtGreen (-) At switch, on lower dash panel A
Ground OBDII White 16 pin 04 Black (-) At OBDII connector B
Negative Starter E29 Black 24 pin 19 Blue (-) At BCM A
Hazard Light M18 Gray 40 pin 11 LtPurple/Yellow (-) At BCM A
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 8 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
3
3
1
1
1
1
M6
M1
M2M3M4 M5 DATA
M1
M2
M3
M4
M5
M5
M6
1717 1616 1515 1414 1313 12122020 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535
13 12
3434 3333 32324040 3939 3838 2828 2727 2626 252525 2424 23233131 3030 2929 2222 2121
1717 1616 1515 1414 1313 12122020 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535 3434 3333 32324040 3939 3838 28 27 2626 25
11
2424 23233131 3030 2929 2222 2121
1717 1616 1515 1414 1313 121220 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535 3434 3333 323240 3939 3838 28 27 2626 25 2424 23233131 3030 2929 2222 2121
1212 1111 1010 99 88 44 33 22 1177 66 55
2424 2323 2222 2121 2020 1616 1515 1414 1313191919 1818 1717
10 11 12 13 14 15 16
1 2 3 4 5 6
16
4 7 88
9
35
24
12348 7 6 5
5A
OROR
WITHOUT ACOMPATIBLEACCESSORY
WITHOUT ACOMPATIBLEACCESSORY
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
COMPATIBLEACCESSORY
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
HOOD SWITCHHOOD SWITCH
CONNECT ONLY WHENUSING A COMPATIBLE ACCESSORY
CONNECT ONLY WHENUSING A COMPATIBLE ACCESSORY
TYPE 2 - WIRING DIAGRAM - 1 OF 1
GRAY/YELLOW (NC)01 GRAY/YELLOW (NC)02 GRAY/RED - LOCK (-) OUTPUT
GREEN/YELLOW (NC)03 GREEN/YELLOW (NC)04 GREEN/RED - UNLOCK (-) OUTPUT
STARTER (-) OUTPUT05 BLUE/YELLOW - STARTER (-) OUTPUTGROUND (-) INPUT06 BLUE/RED - GROUND (-) INPUT
PINK - IGNITION (+) INPUT01 PINK - IGNITION (+) INPUT PINK/BLACK (NC)02 PINK/BLACK (NC)
05 ORANGE/BLACK (NC) BROWN/YELLOW - CANL06 BROWN/YELLOW - CANL
01 WHITE - GROUND (-) INPUT
BROWN/RED - CANH07 BROWN/RED - CANH
04 ORANGE/WHITE - TRUNK (-) OUTPUT
HAZARD LIGHT (-) - 11
STARTER (-) - 19
03 RED/WHITE (NC)02 BLUE/BLACK (NC)
04 BROWN (NC)
06 PURPLE/BLACK (NC)05 PURPLE/YELLOW (NC)
WHITE 07 WHITE (NC)08 BLACK/WHITE (NC)
10 PURPLE/WHITE (NC)
02 YELLOW/RED (NC)03 YELLOW/BLACK (NC)
01 YELLOW (NC)
CANL - 40
POWER LIFTGATE (-) - 06
IGNITION 3 (-) - 25
IGNITION 1 (-) - 27
IGNITION 2 (-) - 28
LOCK/ARM (-) - 12
UNLOCK/DISARM (-) - 13
CANH - 20
OBDII CONNECTOR (UNDER DRIVER SIDE DASH)
BCM (LEFT OF STEERING COLUMN)
POWER LIFTGATE SWITCH
IGNITION (+) - 08
GROUND (-) - 04
12V (+) - 16
09 GREEN - PARKING LIGHT (-) OUTPUT
DATA CABLE
02 WHITE (NC)03 BLACK - GROUND04 RED - 12V (+)
01 BLUE/WHITE (NC)
03 ORANGE (NC)
01 GREEN/BLACK - HOOD STATUS (-) INPUT
3 : M19 BLACK
GREEN
4 : M18 GRAY
5 : GREEN
2 : E29 BLACK
OEM REMOTEREMAINS FUNCTIONALDURING REMOTE START SEQUENCE
1
03 WHITE/BLACK - IGNITION (-) OUTPUT02 WHITE/RED (NC)
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 9 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
TYPE 3 - WIRE CHART - 1 OF 1M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
NIS
SAN
RogueSTD KeyAT
18-20
CanH ~ Green 40 pin 20 Blue (DATA) At BCM A
CanL ~ Green 40 pin 40 Pink (DATA) At BCM A
Negative Ignition 1 M18 Gray 40 pin 27 Yellow (-) At BCM A
Negative Ignition 2 M18 Gray 40 pin 28 LtPurple/White or Green/White (-) At BCM A
Negative Ignition 3 M18 Gray 40 pin 25 Brown (-) At BCM A
Ignition OBDII White 16 pin 08 Yellow (+) At OBDII connector B
12V OBDII White 16 pin 16 White (+) At OBDII connector B
Unlock M19 Black 40 pin 13 Pink (-) At BCM A
Lock M19 Black 40 pin 12 Brown (-) At BCM A
Power Liftgate ~ Green 08 pin 06 LtGreen (-) At switch, on lower dash panel A
Ground OBDII White 16 pin 04 Black (-) At OBDII connector B
Negative Starter E29 Black 24 pin 19 Green (-) At BCM A
Hazard Light M18 Gray 40 pin 11 Yellow (-) At BCM A
Driver Door Pin ~ Green 40 pin 17 LtBlue (-) At BCM A
Qashqai /Rogue SportSTD KeyAT
19-20
CanH ~ Green 40 pin 20 Blue or Lavender/Blue (DATA) At BCM A
CanL ~ Green 40 pin 40 Pink or Lavender/Pink (DATA) At BCM A
Negative Ignition 1 M18 Gray 40 pin 27 Lavender/LtGreen (-) At BCM A
Negative Ignition 2 M18 Gray 40 pin 28 Lavender/Blue (-) At BCM A
Negative Ignition 3 M18 Gray 40 pin 25 Lavender/Pink (-) At BCM A
Ignition OBDII White 16 pin 08 Yellow (+) At OBDII connector B
12V OBDII White 16 pin 16 White (+) At OBDII connector B
Unlock M19 Black 40 pin 13 Pink (-) At BCM A
Lock M19 Black 40 pin 12 Brown (-) At BCM A
Power Liftgate ~ Green 08 pin 06 LtGreen (-) At switch, on lower dash panel A
Ground OBDII White 16 pin 04 Black (-) At OBDII connector B
Negative Starter E29 Black 24 pin 19 Blue (-) At BCM A
Hazard Light M18 Gray 40 pin 11 Lavender/Yellow (-) At BCM A
Driver Door Pin ~ Green 40 pin 17 LtBlue (-) At BCM A
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 10 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
3
3
1
1
1
1
M6
M1
M2M3M4 M5 DATA
M1
M2
M3
M4
M5
M5
M6
1717 1616 1515 1414 1313 12122020 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535
13 12
3434 3333 32324040 3939 3838 2828 2727 2626 252525 2424 23233131 3030 2929 2222 2121
1717 1616 1515 1414 1313 12122020 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535 3434 3333 32324040 3939 3838 28 27 2626 25
11
2424 23233131 3030 2929 2222 2121
17 1616 1515 1414 1313 121220 1919 1818 88 77 66 55 44 331111 1010 99 22 11
3737 3636 3535 3434 3333 323240 3939 3838 28 27 2626 25 2424 23233131 3030 2929 2222 2121
1212 1111 1010 99 88 44 33 22 1177 66 55
2424 2323 2222 2121 2020 1616 1515 1414 1313191919 1818 1717
10 11 12 13 14 15 16
1 2 3 4 5 6
16
4 7 88
9
35
24
12348 7 6 5
5A
TYPE 3 - WIRING DIAGRAM - 1 OF 1
01 YELLOW - RAP SHUTDOWN (-) OUTPUT
MANDATORY WITH OEM ALARM
DRIVER DOOR PIN (-) - 17OROR
WITHOUT ACOMPATIBLEACCESSORY
WITHOUT ACOMPATIBLEACCESSORY
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
COMPATIBLEACCESSORY
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
HOOD SWITCHHOOD SWITCH
GRAY/YELLOW (NC)01 GRAY/YELLOW (NC)02 GRAY/RED - LOCK (-) OUTPUT02 GRAY/RED - LOCK (-) OUTPUT
GREEN/YELLOW (NC)03 GREEN/YELLOW (NC)04 GREEN/RED - UNLOCK (-) OUTPUT04 GREEN/RED - UNLOCK (-) OUTPUT
STARTER (-) OUTPUT05 BLUE/YELLOW - STARTER (-) OUTPUTGROUND (-) INPUT06 BLUE/RED - GROUND (-) INPUT
PINK - IGNITION (+) INPUT01 PINK - IGNITION (+) INPUT PINK/BLACK (NC)02 PINK/BLACK (NC)
05 ORANGE/BLACK (NC)05 ORANGE/BLACK (NC) BROWN/YELLOW - CANL06 BROWN/YELLOW - CANL
01 WHITE - GROUND (-) INPUT 01 WHITE - GROUND (-) INPUT
BROWN/RED - CANH07 BROWN/RED - CANH
04 ORANGE/WHITE - TRUNK (-) OUTPUT04 ORANGE/WHITE - TRUNK (-) OUTPUT
HAZARD LIGHT (-) - 11HAZARD LIGHT (-) - 11
STARTER (-) - 19STARTER (-) - 19
03 RED/WHITE (NC)03 RED/WHITE (NC)02 BLUE/BLACK (NC)02 BLUE/BLACK (NC)
04 BROWN (NC)04 BROWN (NC)
06 PURPLE/BLACK (NC)06 PURPLE/BLACK (NC)05 PURPLE/YELLOW (NC)05 PURPLE/YELLOW (NC)
WHITE 07 WHITE (NC)07 WHITE (NC)07 WHITE (NC)08 BLACK/WHITE (NC)08 BLACK/WHITE (NC)
10 PURPLE/WHITE (NC)10 PURPLE/WHITE (NC)
02 YELLOW/RED (NC)02 YELLOW/RED (NC)03 YELLOW/BLACK (NC)03 YELLOW/BLACK (NC)
CANL - 40CANL - 40
POWER LIFTGATE (-) - 06POWER LIFTGATE (-) - 06
IGNITION 3 (-) - 25IGNITION 3 (-) - 25
IGNITION 1 (-) - 27IGNITION 1 (-) - 27
IGNITION 2 (-) - 28IGNITION 2 (-) - 28
LOCK/ARM (-) - 12LOCK/ARM (-) - 12
UNLOCK/DISARM (-) - 13UNLOCK/DISARM (-) - 13
CANH - 20CANH - 20
OBDII CONNECTOR (UNDER DRIVER SIDE DASH)OBDII CONNECTOR (UNDER DRIVER SIDE DASH)
BCM (LEFT OF STEERING COLUMN)BCM (LEFT OF STEERING COLUMN)
POWER LIFTGATE SWITCHPOWER LIFTGATE SWITCH
IGNITION (+) - 08IGNITION (+) - 08
GROUND (-) - 04GROUND (-) - 04
12V (+) - 1612V (+) - 16
09 GREEN - PARKING LIGHT (-) OUTPUT09 GREEN - PARKING LIGHT (-) OUTPUT
DATA CABLEDATA CABLE
02 WHITE (NC)02 WHITE (NC)03 BLACK - GROUND03 BLACK - GROUND04 RED - 12V (+)04 RED - 12V (+)
01 BLUE/WHITE (NC)01 BLUE/WHITE (NC)
03 ORANGE (NC)03 ORANGE (NC)
01 GREEN/BLACK - HOOD STATUS (-) INPUT01 GREEN/BLACK - HOOD STATUS (-) INPUT
3 : M19 BLACK
GREEN
4 : M18 GRAY
5 : GREEN
2 : E29 BLACK
OEM REMOTEREMAINS FUNCTIONALDURING REMOTE START SEQUENCE
OEM REMOTEREMAINS FUNCTIONALDURING REMOTE START SEQUENCE
1
03 WHITE/BLACK - IGNITION (-) OUTPUT03 WHITE/BLACK - IGNITION (-) OUTPUT02 WHITE/RED (NC)02 WHITE/RED (NC)
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 11 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
01OFF
ACC ONSTART
02
03OFF
ACC ONSTART
04
05OFF
ACC ONSTART
06
07OFF
ACC ONSTART
08
09
10
11OFF
ACC ONSTART
12
13OFF
ACC ONSTART
14
MODULE PROGRAMMING PROCEDURE - 1 OF 1
Set ignition to ON position.
Wait, LED 1 will turn solid RED, then solid GREEN for 1 second, then solid RED.
Set ignition to OFF position.
Wait, LED 1 will turn OFF.
Set ignition to ON position.
If LED 1 fl ashes GREEN rapidly, proceed with step 7. If LED 1 turns solid GREEN for 2 seconds, proceed with step 13.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect module from vehicle.
Connect module to computer and proceed with extended programming.
Connect power fi rst. Connect module to vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid GREEN for 2 seconds.
Set ignition to OFF position.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 12 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
ENGINESTARTSTOP
OFF ACC ON STARTOFF
05
>>
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.
Time restriction. Complete next step within 7 seconds.
Cycle ignition ON fi ve times [5x OFF/ON] rapidly.
Wait, LED 1 will turn solid RED for 2 seconds.
Set ignition to OFF position.
Valet Mode Programming Procedure completed.
To exit valet mode: repeat steps 1 to 5.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 13 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
>>
>>
>>
01
ENGINESTARTSTOP
OFF ACC ON STARTOFF
02
03[X]
04
05[Y]
06
07[Z]
08[Z]
09
10
11[Y]
12
13
14
>>
MODULE NAVIGATION PROCEDURE - 1 OF 1
It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP 13.
Module must be programmed to the vehicle.
Use the Module Navigation Chart on the next page.
Set ignition to OFF position.
TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid GREEN.
IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will fl ash GREEN an equal amount of times continuously.
TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid RED.
IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will fl ash RED an equal amount of times continuously.
TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid GREEN.
LED 1 will flash GREEN as many times as the current (or default) setting number, continuously.
IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will fl ash GREEN an equal amount of times continuously.
To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure.
To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED.
LED 1 will fl ash RED as many times as the current option number continuously.
Configure every other setting and proceed to step 13.
MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will fl ash RED rapidly. Release programming button. LED 1 will turn OFF.
Module navigation completed.
Failure to exit the Module Navigation will drain vehicle battery.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 14 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
MODULE NAVIGATION CHART - 1 OF 1
MODULE NAVIGATION CHART:NOTES
[X] M
ENU
S
[Y] O
PTIO
NS
[Z] S
ETTI
NGS
I Default settings are listed in bold.
01 CONFIGURATION
01 DISARM/UNLOCK BEFORE START01 OFF
II Make sure the option is covered on the vehicle before attempting to change the setting.
02 ON
02 RELOCK AFTER START01 OFF02 ON
03 RELOCK AFTER SHUTDOWN01 OFF02 ON
04 FORCE UNLOCK ALL ON FIRST PRESS01 OFF02 ON
05 N/A 01 N/A06 N/A 01 N/A
07 FACTORY KEYLESS RS SEQUENCE
01 DISABLE02 N/A03 LOCK + UNLOCK + LOCK04 LOCK + LOCK + LOCK
08 MODULE RUN TIME
01 03 MIN02 05 MIN03 10 MIN04 15 MIN05 25 MIN06 30 MIN07 35 MIN08 15 MIN
09 WAIT TO START DELAY
01 02 SEC02 05 SEC03 08 SEC04 10 SEC05 15 SEC06 20 SEC07 25 SEC08 30 SEC
10-12 N/A 01 N/A02-07 Technical Support only 01 N/A 01 N/A
*Vehicle will shutdown when a door is opened.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 15 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
REMOTE STARTER ERROR CODES - 1 OF 1
REMOTE STARTER ERROR CODES:NOTES
[X] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
03 Foot brake is ON. 04 Hood is open.
II After a remote starter failure, the parking lights will fl ash [X] number times to indicate an error code. See table.
05 Engine tach signal is lost.06 System is in Valet Mode.07 Vehicle is moving (VSS).08 Glow plug timeout error.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 16 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
MODULE DIAGNOSTICS - 1 OF 1
TEST MODULE
LED
1 S
TATU
S
DIA
GNO
STIC
I DURING PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
III WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 17 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
Disconnect all connectors from module except the BLACK 4-PIN connector.
Disconnect the BLACK 4-PIN connector.
PRESS AND HOLD programming button while connecting the BLACK 4-PIN connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 18 OF 19• 20200324DOC.: #70282
-
Patent No. US 8,856,780 CA 2759622
INSTALLATION CHECKLIST - 1 OF 1
CHECKLIST
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
¨
Question 1: Does the vehicle remote start?YES: Go to next step.
¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
¨
Question 2: Does the vehicle shut down?YES: Go to next step.
¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
¨
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?YES: Go to next step.
¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
¨
Question 4: Does the vehicle remote start?YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
¨ NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
¨¨
Question 5: Does the vehicle shut down?YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2020 OEM-AL(RS)-NI9-[ADS-ALCA]-EN
PAGE 19 OF 19• 20200324DOC.: #70282