7/31/2019 instalar lasercut

1/99

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface. Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

7/31/2019 instalar lasercut

2/99

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. Theprovided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

7/31/2019 instalar lasercut

3/99

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

7/31/2019 instalar lasercut

4/99

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

7/31/2019 instalar lasercut

5/99

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog andUSB laser interface.

7/31/2019 instalar lasercut

6/99

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

7/31/2019 instalar lasercut

7/99

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successfulinstallations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

7/31/2019 instalar lasercut

8/99

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog andUSB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also beinstalled from a USB dongle, Network Drive, or

7/31/2019 instalar lasercut

9/99

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain anysoftware for the user. Do not insert the dongle yet.

7/31/2019 instalar lasercut

10/99

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

7/31/2019 instalar lasercut

11/99

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also beinstalled from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-9060SE\20081224\install\Setup.exe

7/31/2019 instalar lasercut

12/99

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain anysoftware for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

7/31/2019 instalar lasercut

13/99

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain anysoftware for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

7/31/2019 instalar lasercut

14/99

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

7/31/2019 instalar lasercut

15/99

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the defaultdirectories. Do NOT use the Chinese version.

7/31/2019 instalar lasercut

16/99

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installationapplication from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

7/31/2019 instalar lasercut

17/99

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successfulinstallations have been done by copying all the

7/31/2019 instalar lasercut

18/99

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the defaultdirectories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. Theprovided CD should be labeled as HX-9060 Laser 4.1.2.0

7/31/2019 instalar lasercut

19/99

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

7/31/2019 instalar lasercut

20/99

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

7/31/2019 instalar lasercut

21/99

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. Theprovided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

7/31/2019 instalar lasercut

22/99

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

7/31/2019 instalar lasercut

23/99

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

7/31/2019 instalar lasercut

24/99

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog andUSB laser interface.

7/31/2019 instalar lasercut

25/99

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

7/31/2019 instalar lasercut

26/99

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successfulinstallations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

7/31/2019 instalar lasercut

27/99

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog andUSB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also beinstalled from a USB dongle, Network Drive, or

7/31/2019 instalar lasercut

28/99

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain anysoftware for the user. Do not insert the dongle yet.

7/31/2019 instalar lasercut

29/99

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

7/31/2019 instalar lasercut

30/99

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also beinstalled from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-9060SE\20081224\install\Setup.exe

7/31/2019 instalar lasercut

31/99

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain anysoftware for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

7/31/2019 instalar lasercut

32/99

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain anysoftware for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

7/31/2019 instalar lasercut

33/99

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

7/31/2019 instalar lasercut

34/99

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the defaultdirectories. Do NOT use the Chinese version.

7/31/2019 instalar lasercut

35/99

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installationapplication from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

7/31/2019 instalar lasercut

36/99

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successfulinstallations have been done by copying all the

7/31/2019 instalar lasercut

37/99

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the defaultdirectories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. Theprovided CD should be labeled as HX-9060 Laser 4.1.2.0

7/31/2019 instalar lasercut

38/99

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

7/31/2019 instalar lasercut

39/99

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

7/31/2019 instalar lasercut

40/99

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. Theprovided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

7/31/2019 instalar lasercut

41/99

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

7/31/2019 instalar lasercut

42/99

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-install the drivers for the soft-dog and

USB laser interface.

Installing the LaserCut 5.3 Software

The USB Dongle is the software license key only. It does NOT contain any

software for the user. Do not insert the dongle yet.

Find the CD containing your LaserCut 5.3 installation application. The

provided CD should be labeled as HX-9060 Laser 4.1.2.0

Place the CD into the CD drive of your computer. The software can also be

installed from a USB dongle, Network Drive, or

any other resource accessible from the new computer. The most successful

installations have been done by copying all the

installation files to the local hard drive and then running the installation

application from the local hard drive.

Navigate the My Computer window to your installation files as shown here.

The installation file is located at \english-

9060SE\20081224\install\Setup.exe

Run the Setup.exe application

Answer all the questions for the software installation .. Please use the default

directories. Do NOT use the Chinese version.

The program will copy the files and re-insta