IKO

N s

inks

1

Designed with the Kiwi householder in mind, stylish yet functional our sinks and appliances are built to last.

2020 COLLECTION

INSPIRATIONAL SINKS AND APPLIANCES

WASTE DISPOSALS COOKING + VENTLIATION DISHWASHERS + REFRIGERATION LAUNDRYSINKS TAPWARE

SINKS APPLIANCES

100% NEW ZEALAND OWNED AND OPERATED

SEATTLE COLLECTION

IKO

N s

inks

2 Inspirational sinks and appliances

SINK CONSIDERATIONS

Which cabinet size?

It is very important to know your cabinet size before deciding on a sink as it will impact the size and style. Start with the cabinet size and deduct 36mm for the sides (it comes in different sizes by 12,16 or 18mm board but 36mm is a figure that generally you are safe with). If you have a 600mm cabinet, deduct 38mm and you’re left with 562mm of useable space. When choosing a sink to undermount take the overall length of the sink, however when top mounting you can just use the measurements of the actual bowl(s). It is always ideal to allow some room either side of the sink for the electrician to equipotently bond your sink or the plumber to plumb it, working in a cabinet where the sink is at capacity and leaves little room on either side can come with its own set of issues. NOTE: if you choose a reversable sink and are top mounting it, ensure you also allow for the overflow (positioned at the side of the sink).

Pressed or handmade?

Pressed bowls are made from drawing the bowls shape out of a sheet of stainless steel and pressing it into a model to get it’s shape, while handmade (or fabricated) bowls are made by folding their shape and welding it’s sides. Sinks can be manufactured from different thickness stainless steel, generally the thicker the steel, the more expensive the sink becomes. Most Ikon sinks either come in 1.0mm or 1.2mm high grade 304 stainless steel. 1.2mm thick stainless steel sinks are suitable for both commercial and residential use.

Top, flush or under mount?

UNDER MOUNT

Under mount sinks are installed underneath the worksurface so a solid surface worktop, such as granite or wood, is recommended. They are not generally compatible with laminate.

TOP MOUNT

Top mount sinks are installed from above into a pre-prepared hole in your benchtop.

FLUSH MOUNT

Flush mount sinks feature a single thickness edge allowing it to sit flush against the benchtop material.

Rolled, bevelled or laser/integrated edge?

Some of our Reginox sinks give you the option of either a rolled (R) or laser (L) edge. When selecting a top mount sink, a rolled edge gives a traditional look and lifts the sink slightly higher off the benchtop, while a laser edge gives a seamless, flatter profile.

ROLLED EDGE

BEVELLED EDGE

LASER/INTEGRATED EDGE

Left, right or reversible?

When we refer to a sink being left (L) or right (R) we are specifically referring to the main (largest) bowl on the sink. This has no bearing on the drainer (when applicable).

Reversible sinks have their waste(s) in the centre and overflows to the side of the bowl which means they can be turned either way.

EXAMPLE OF A LEFT (L) SINK:

220 14

0

618340

450

400

200

28

120

EXAMPLE OF A RIGHT (R) SINK:

22014

0

618340

450

400

200

28

120

Which corner radius?

Essentially, the larger the radius, the rounder the corner. Most of our line drawings refer to the internal (inside) corner radius but you will occasionally also see the external (outside) radius corner mentioned. A ‘radius 10’ corner is ideal as you can fit your fingers down into the corners for cleaning. A tighter radius corner then ‘radius 10’ will require more effort.

Radius

0

Radius

10

Radius

25

Radius

60

IKO

N s

inks

3

CARING FOR YOUR SINK

MAINTAINING YOUR GRANITE SINKA sink is not “self-cleaning”, but it is simple and easy to maintain after daily use. Your new Ikon Acrylic-Quartz sink will bring lasting colour to your kitchen through advanced material technology.

On installation, a sink will have an overall satin sheen finish. However, as you use it, eventually it will acquire a smoother, silkier finish. To ensure that this luster develops evenly, please adhere to the following cleaning guidelines.

For everyday cleaning, try the easy way first!The recommended way to clean your sink is by washing with soap or detergent* and warm water, ideally after use. The surface can be wiped with a clean soft cloth. This procedure, if carried out regularly should be sufficient to keep the surface clean and stain free. Heavy staining liquids such as dyes and vegetable juices should be washed off as soon as possible.

Any remaining marks should be cleaned off, depending on the type of mark or stain, using suitable cleaners such as detergent*, Jif™ or for some chemicals, IPA or methylated spirit. If you live in a hard water area try to prevent lime scale deposits forming, as lime scale often give the appearance that the sink is stained. Lime scale can be removed with any dilute acid, a mild acid like vinegar can be used or it is still better to use a proprietary cleaner containing oxalic acid. ALWAYS thoroughly rinse the sink after applying any cleaner, do not allow any chemicals to remain on the sinks surface for prolonged periods.

Although liquids cannot penetrate your sink, it is recommended to wipe your sink using a damp cloth and a mild cream abrasive cleanser (Jif™) or a common household degreaser* (“Spray and Wipe” type products). Always clean using a circular motion. If a stain needs more attention, refer to our cleaning methods stated below.

Dealing with resistant stains:Remove all the fat and oil residues of normal food preparation from the sink, using a detergent* or a hardsurface cleaner. Use a spray with 3/4 of liquid household bleach and 1/4 water to spray the sink and leave a few hours or overnight. The exposure time should be limited to 16hrs. In the morning, rinse or clean with a damp cloth. The sink should then be beautifully clean, with very little effort.

White sinks may discolour over long periods of time, to bring the white back use a mixture of ¾ household bleach and ¼ water. Spray the sink and leave for a few hours or overnight (no longer than 16 hours). Rinse and clean with a damp cloth. This type of cleaning should not be done regularly

Your new acrylic-quartz sink is an elegant, hygienic, long-lasting material used for kitchen sinks, and bathroom vanities, and many other applications.

The following guidelines have been created to answer your questions on how to use and care for your new sink.

IKO

N s

inks

4

Common household spills, such as vinegar, coffee, tea, lemon juice, dyes, ketchup, red wine or vegetable spills:First, try the easy methods, then progress with an abrasive plastic scouring pad and a detergent* or an ammonia based hard-surface cleaner.

Only with a really persistent stain as lily pollen, or saffron, or with a light scratch, should you need to resort to an abrasive plastic scouring pad and rub over the stain with some bleach. Rinse several times with warm water and dry with a soft cloth.

Always restore the overall luster afterwards, using a damp cloth and a mild cream abrasive cleaner and blend the scrubbed area into the entire surface by rubbing in a circular motion. If hard water scale has built up around the waste or taps, use an abrasive plastic scouring pad and rub over the stain with a standard household limescale remover and follow the manufacturer’s instructions. Rinse several times with warm water and dry with a soft cloth. Restore the gloss level as described above.

THINGS TO BE AWARE OFA large amount of ‘eco’ dishwash liquids contain citrus (limonene) in their ingredients. Although a natural product, it is very potent and can damage most sinks. Do not use these products, instead use Palmolive or Sunlight.

HeatAlways use a heat protection pad, trivet (with rubber feet) or protective sink mat for hot cookware, or leave cookware to cool on the hob first. Never put hot pans, particularly cast iron, directly in a sink. Such heat can damage any surface.

Pouring boiling liquids directly into the sink may damage your sink.

ScratchesAlthough Acrylic-Quartz sinks are strong, like all materials, it may develop slight abrasion marks in normal everyday use. Under normal usage, your sink is unlikely to be damaged by dropping heavy utensils on it or scratched by everyday objects. However it is possible under very exceptional circumstances that an extremely hard blow or pressure with a heavy kitchen knife may chip or scar the surface, always use an Ikon chopping board when preparing food. Don’t chop, cut or dice food directly on the surface of the sink or drainer, it may damage your knife or sink. Scratches are generally cosmetic and do not impact the overall performance of the product.

Dark, heavily pigmented colours will show scratches, dust and ordinary wear and tear more readily than lighter, textured colours.

It is not recommended to use a plastic washing up bowl in the sink. Such bowls do not protect the surface of the sink. Because washing up bowls are made of soft plastic, small particles become imbedded in the bottom and they slowly grind away the surface of the sink. Strong alkalis like ammonia and caustic soda, caustic paint strippers, paint brush cleaners and neat chemical descaling agents are best kept away from your sink as prolonged exposure to them may dull the surface.

Under certain circumstances aluminium pans may leave a grey mark on the surface of the sink. This is not permanent, it is a deposit of metal from the saucepan and can be easily cleaned off. Do avoid the use of abrasive cleaners such as scouring pads and wire wool on the sink as such cleaners tend to abrade the surface which aggravates cleaning.

Chemical SpillsAccidental spills of strong chemicals should be flushed promptly with plenty of soapy water to avoid damaging worktops! For nail varnish spills, non-acetone based remover can be used, and then flushed with water. Undetected or prolonged exposure to chemicals may damage the surface.

WHATEVER HAPPENS, DO NOT DESPAIR!Please contact us if you have ANY questions/concerns regarding the care and maintenance of your sink.

IKO

N s

inks

5

HOKITIKA IK2867W, IK2867B, IK2867G **W-B-G refer to White, Black or Grey

Suggested cabinet size 50cm

WASTE DISPOSAL

WIRE BASKET

SPACE SAVING PLUMBING KIT IK5007

ROLLER MAT IKRM, IKFMAT, IKFMAT002

AC

CE

SS

OR

IES

TAIHAPE IK2869W, IK2869B, IK2869G **W-B-G refer to White, Black or Grey

Suggested cabinet size 55cm

LYTTELTON - Eastwood Kitchens, Tauranga

Quartz & Granite sinks are made from quartzite, a natural mineral resource

which is stable on both physical and chemical properties. These sinks are

made from top quartz material and PMMA (polymethyl methacrylate) for

hardworking kitchens.

• Reduction in noise transfer through the sink

• Impact resistant (if you drop a pan within the height of 1 meter no

deformation, no cracking and no crushing will occur)

• Oil stain resistant

• Hard, durable surface

• Acid & Alkali resistant

• Antibacterial and extremely hygienic

• Pressure resistant (can withstand up to 300kgs)

• Easy to clean

• Odour Free

• Heat proof up to 330C

• 10mm radius internal corners

• 10 year warranty

SEATTLE COLLECTION

457417

406

363

203.

2

533469

457

394

205

Seattle CollectionInspirational sinks and appliances

IKO

N s

inks

6

AC

CE

SS

OR

IES

WASTE DISPOSAL

SPACE SAVING PLUMBING KIT IKP002

ROLLER MAT IKRM, IKFMAT, IKFMAT002

ASHBURTON IK2823W, IK2823B, IK2823G **W-B-G refer to White, Black or Grey

146

345

1000

295

500

155

440

155345

200

ReversibleSuggested cabinet size 60cm

205

337

860

420

500

ALEXANDRA IK2811W, IK2811B, IK2811G **W-B-G refer to White, Black or Grey ReversibleSuggested cabinet size 45cm

WASTE DISPOSAL

SPACE SAVING PLUMBING KIT IK5007

AC

CE

SS

OR

IES

LYTTELTON IK2866W, IK2866B, IK2866G **W-B-G refer to White, Black or Grey

Suggested cabinet size 65cm610544

457

394

205

WASTE DISPOSAL

WIRE BASKET

SPACE SAVING PLUMBING KIT IK5007

ROLLER MAT IKRM, IKFMAT, IKFMAT002

AC

CE

SS

OR

IES

LARGE SINK WHICH FITS MOST OVEN TRAYS IN FLAT

GALLIPOLI 5305

PISA 5306

NAPLES 5063

TAPS WE RECOMMEND WITH THIS COLLECTION

35

Seattle CollectionInspirational sinks and appliances

IKO

N s

inks

7

KINLOCH IK2844W, IK2844B **W-B refers to White or Black Suggested cabinet size 90cm

365

838365

559

415

35

241

BUNNYTHORPE IK2833W, IK2833B **W-B refers to White or Black ReversibleSuggested cabinet size 80cm

200

1160330

500

440

70

330

OXFORD IK2855W, IK2855B **W-B refers to White or Black Suggested cabinet size 90cm

Large bowl right only

WASTE DISPOSAL

SPACE SAVING PLUMBING KIT IKP002

ROLLER MAT IKRM, IKFMAT, IKFMAT002

WASTE DISPOSAL

WIRE BASKET (in main bowl only)

SPACE SAVING PLUMBING KIT IKP002

ROLLER MAT IKRM, IKFMAT, IKFMAT002

IDEAL FOR TAP MOUNT

AC

CE

SS

OR

IES

AC

CE

SS

OR

IES

Seattle CollectionInspirational sinks and appliances

TAP LANDING IDEAL FOR TOP MOUNT INTO LAMINATE TOP

DOUBLE BOWL AND DRAINER

IKO

N s

inks

8

WARRANTY INFORMATION (CONT.)

IKON SINKS WARRANTYStainless Steel Sinks Lifetime*Arizona Collection 5 years

iKolor™5 years if purchased via a Premium Partner (otherwise 5 years). The warranty is with the original purchaser and cannot be transferred.

Quartz Granite 10 years

IKON APPLIANCES / OTHER WARRANTYWaste Disposals 2 yearsAir Switch 1 yearRangehoods / Ovens / Hobs 2 yearsDucting 1 year

KLEENMAID WARRANTYAll Kleenmaid appliances 3 years

REGINOX WARRANTYColoured Stainless Steel 5 yearsPITT cooktops 5 years

WARRANTY INFORMATION

Warranty starts from the date in which the product is invoiced to the customer. A copy of the invoice is required before warranty is undertaken. If you have a warranty for our products, please ask them to contact us directly on 0800 83 83 84, for greater efficiency and accuracy. If we can not find the invoice through our system, we may contact you to request it.

*Lifetime being 50 years

For New Zealand customers:Please remember that the warranties on offer from Ikon are offered to you, the consumer, as a “manufacturers warranty”. You may still have rights or remedies under the Consumer Guarantees Act that are not defined in our “standard warranties”. Nothing in our warranty documentation or any other document can remove any rights you have under the CGA.

For further information, visit: www.consumerprotection.govt.nz

WarrantiesInspirational sinks and appliances

IKO

N s

inks

9 WarrantiesInspirational sinks and appliances

Ikon Commercial Limited (Ikon), as a New Zealand importer, hereby warrants (subject to the exclusions and conditions set out below) to the consumer (the consumer) of the brands of sinkware supplied directly or indirectly by or from Ikon that the product (the product) shall be free from manufacturing defects in materials or workmanship for a life time warranty (life time being 50 years for stainless steel sinks (unless otherwise stated), 10 year warranty for granite sinks and all accessories have a 1 year warranty) from the date of original purchase of the product from Ikon or from the retailer (as the case may be).

Subject to the below mentioned exclusion and conditions, the obligations of Ikon under this warranty shall be limited to either of the following (at Ikon’s sole option):

1. To without charge repair or replace the defective Product (or the defective parts there of) and to reinstall the repaired or replaced product (or to pay reasonable costs of installation):

or

2. To refund the Consumer the original purchase price for the defective products:

AND such repair, replacement or refund shall constitute fulfilment of all of Ikon’s obligations under this warranty. To the extent permitted by law Ikon will not whether by virtue of this warranty or otherwise be liable for and hereby disclaim any liability for any incidental, economic or consequential loss, expenditure or damage, directly or indirectly suffered by the Consumer or any other person in respect to any defect in the Product.

This warranty does not apply if:

1. The Product has been installed, used or cared for in any improper manner or otherwise contrary to any specifications, instructions or recommendations contained in any brochure or materials supplied on the original purchase of the product.

2. Any attempt is made to repair or modify the product in any way by any person without written authority of Ikon.

3. Installation of the product has occurred without regard to the installation instruction provided and full consideration is given to all regulatory codes covering electrical, gas and plumbing installations.

4. That this warranty does not extend to:

a) optional glass lids for hobs apart from claims which relate to mechanical or physical damages thereof at the date of purchase;

b) light globes of any ages;

c) damage to the ceramic glass caused by liquid or solid spillover, lack of maintenance or impact;

d) damage to surface coatings caused by cleaning or maintenance, using products not recommended by the owners handbook;

e) defects caused by normal wear and tear, accident, negligence, alteration or misuse;

f) The Product is not in the possession of the original Consumer;

g) The Product has been dismantled, repaired or serviced by other than an authorised Ikon service person.

5. All stainless steel sinks must be bonded to the general mass of earth. In situations where it is not required for electrical compliance it must be done for the purpose of equipotential bonding.

6. A claim under this warranty is not notified in writing to Ikon within a reasonable period after the defect in the Product would have become apparent to a reasonable person.

Any claim under this warranty must be made in writing to Ikon (at P.O. BOX 15158, Dinsdale) and must be supported by reasonable evidence of the date of original purchase of the Product and suspected defects in the Product must be made available for inspection by Ikon or it’s authorised representatives.

Nothing in this Product warranty shall override or negative any statutory right or remedy that may be available to the Consumer under the Consumer Guarantees Act 1993, except where the Consumer has acquired Product for the purposes of business or commercial use.

7. If a service call is required and it is not a result of either faulty materials or workmanship, then Ikon or the service agent will charge the customer directly for the service call out. All warranties must go through the approved warranty process. No warranty claims may be expressed or implied by any party other than the warranty claims handler from Ikon. Official decisions will always be made in writing once a claim is fully investigated. Please refer to our website for latest updates and warranty conditions.

Disclaimer

Ikon Commercial Limited, is constantly seeking ways to improve the specifications, design and production of the Product. Alterations take place continually. Whilst every effort is made to produce up to date literature, brochures should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular Product.

Product cutouts indicated in our literature are indicative only. Actual examples of the Product only should only be used to define cutout sizes. Distributors, agents and retailers have no authority to bind Ikon by any express or implied undertaking or representation.

WARRANTY INFORMATION CONT

IKO

N s

inks

10

AGB Stone, Hamilton.Sulphur sink and Trento tap

Available from:

VERSION ONE 2019

Our showroom is located at: 12-14 Charlies Way, Frankton, Hamilton.

Our postal address is: PO Box 15158, Dinsdale Hamilton 3243

phone 0800 83 83 84 fax 0800 83 83 85 email orders@ikon.nz website www.ikon.nz