insight verify™ 2.0 order confirmation solution...verify™ 2.0 on an endura 15x, isa or other...

9
Confidential Document: Page 1 Do not copy or distribute without written permission from Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved. Quick Reference Guide Insight Verify™ 2.0 Order Confirmation Solution Revision Date: 2017/05/22 Revision A Table of Contents 1 INTRODUCTION ................................................................................................................................... 2 2 ACCESSING THE MANAGEMENT INTERFACE ................................................................................ 2 3 REMOVING AN IMAGE FROM A SLIDESHOW .................................................................................. 3 4 ADDING AN IMAGE TO A SLIDESHOW ............................................................................................. 5 5 UPLOADING A NEW IMAGE ............................................................................................................... 6 6 CHANGING THE ORDER TOTAL OR ORDER CANCEL TEXT ......................................................... 7

Upload: others

Post on 13-Feb-2021

0 views

Category:

Documents


0 download

TRANSCRIPT

  • Confidential Document: Page 1 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    Quick Reference Guide

    Insight Verify™ 2.0 Order Confirmation Solution

    Revision Date: 2017/05/22 Revision A

    Table of Contents

    1 INTRODUCTION ................................................................................................................................... 2

    2 ACCESSING THE MANAGEMENT INTERFACE ................................................................................ 2

    3 REMOVING AN IMAGE FROM A SLIDESHOW .................................................................................. 3

    4 ADDING AN IMAGE TO A SLIDESHOW ............................................................................................. 5

    5 UPLOADING A NEW IMAGE ............................................................................................................... 6

    6 CHANGING THE ORDER TOTAL OR ORDER CANCEL TEXT ......................................................... 7

  • Confidential Document: Page 2 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    1 Introduction This Quick Reference Guide briefly reviews the most common tasks when maintaining and configuring Verify™ 2.0 on an Endura 15X, ISA or other Delphi Display system. For a complete description of options and tasks, see the User’s Guide for the Insight Verify™ 2.0 Order Confirmation System.

    2 Accessing the Management Interface To access the Management Interface, open an HTML5-compliant web browser (Chrome, Firefox or Edge) and enter the following URL: https:///configMgmt replacing the text with your device’s IP address. For example, if you have an Endura 15X with an IP address of 192.168.11.129, you would enter https://192.168.11.129/configMgmt.

    All content is securely delivered over the network using HTTPS, but the certificate used is self-signed as frequently Endura 15X systems are not connected to the Internet. When you first access the Management Interface, you may receive an “Insecure Connection” warning. If you see this warning, select the appropriate option to add a security exception for your browser.

    Once you have created the security exception in your browser, you will see the Management Interface login screen shown below:

    The default User Name is delphidisplay The default Password is !ns!ght Once you log in, you will see the Application Launcher. For configuration tasks you will be clicking on the “Configuration” icon in the lower right of the Application Launcher.

  • Confidential Document: Page 3 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    3 Removing an Image From a Slideshow To edit a slideshow, do the following:

    1. From the Insight Application Launcher, click Configuration in the lower right corner.

    2. Click the “SlideShow” tab

    3. “Open”

    4. Select the slideshow to modify and click “Submit”

    1

    2

  • Confidential Document: Page 4 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    5. To remove a slide, drag it and drop onto the “Trash Can” icon

    This leaves a blank space in the slideshow. This space is OK and will not appear in the actual

    slideshow.

    6. Click “Save” to save your changes. You will be prompted to name the slideshow. Click OK.

    CAUTION: Do NOT change the name of the slideshow. If you change the name of the slideshow when saving, it will break its link to the Layout and the Verify display will be white instead of displaying this slideshow.

    3

    4

  • Confidential Document: Page 5 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    4 Adding an Image to a Slideshow

    1. Open a slideshow like in “Removing a Slide”, then drag images to the right to make an open

    space in the slideshow where you want to add the image.

    2. This leaves a blank space in the slideshow. Then drag the image to add and drop it on the blank

    space.

    1

    2

    v

  • Confidential Document: Page 6 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    7. Click “Save” to save your changes. You will be prompted to name the slideshow. Click OK.

    CAUTION: Do NOT change the name of the slideshow. If you change the name of the

    slideshow when saving, it will break its link to the Layout and the Verify display will be white

    instead of displaying this slideshow.

    5 Uploading a New Image

    1. All images must be in JPEG (.jpg) format. Full screen images should be 1024x768 resolution.

    2. From the Insight Application Launcher, click Configuration in the lower right corner.

    3. Click “Upload New”

    3

    v

    1

  • Confidential Document: Page 7 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    4. Select a Category for the image.

    5. Click the “Choose File” button and select the file you want to upload.

    6. Click the “Upload” button to upload the image.

    6 Changing the Order Total or Order Cancel Text 1. From the Insight Application Launcher, click Configuration in the lower right corner.

    1. Click the “Layout” tab

    2. Click “Open”

    3. Select the Layout to change (Order Total or Order Cancel) and click “Submit”

    2

    1

  • Confidential Document: Page 8 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    4. Click on the text you want to change. Note that the text may be divided into multiple text fields.

    5. Edit the text by changing the “Value” in the lower left corner of the screen. The special

    character sequence of three vertical bars ||| will be replaced on the Verify system with the order

    total.

    a. You can also change the text size and color here.

    6. Click “Save” to save your changes.

    2

    3

  • Confidential Document: Page 9 Do not copy or distribute without written permission from

    Delphi Display Systems, Inc. Copyright 2014. [Unpublished Work]. All rights reserved.

    Revision History

    Date Description Version Author

    5/22/2017 First Draft A B. Medvitz