1

inoCOLL One-handed guns

One-handed guns for the efficient application of bonding mortars and spraying of basecoat mortars.

INOTEC GmbHWe make your construction site easier!

2

One-handed guns make your work easier!

3

Benefits at a glance • Faster and cleaner material application• Simple operation• Robust and handy design• Fast and simple cleaning• Ergonomic handle• Swivel joint for fatigue-free work• Integrated remote control switch• Can be connected to all common mixing

and delivery pumps• Practical scaffold hook for suspending on scaffolding poles• Optional attachment for spraying

mineral and organic products• For grit sizes up to 1.5 mm

Accessories see page 6

inoCOLLOne-handed gun for application of bonding mortars and spraying up to 1.5 mm grit size

Technical data

Max. operating pressure 40 bar

Operating voltage 24 – 42 V

Max. delivery rate 15 l/min

Max. particle size 1.5 mm

Hose diameter 19 mm

Hose length 2 m

Weight- Gun 1.5 kg- Gun with hose 4.2 kg

The all-purpose inoCOLL one-handed gun can be directly connected to all common mixing and delivery pumps. The mortar is applied to the ETICS insulation boards quickly and effortlessly. An integrated remote control switch enables the automatic activation or deactivation of connected silos or delivery / mixing pumps when the trigger is actuated. With the optional, handy and lightweight spray attachment, the inoCOLL can be converted into a complete spraying device.

Areas of applicationApplication and spraying of bonding and basecoat mortars, and much more. (See table on page 5)

Basic moduleItem no. 10024144

Scope of deliveryinoCOLL:• One-handed gun• Scaffold hook• Mortar hose, 2 m, with swivel joint• Connecting plug for remote control cable• Hose piece• 2 sponge balls with a diameter of 20 mm• Operating instructions

Bonding / spraying setItem no. 10042999

Scope of deliveryinCOLL bonding / spraying set:

As with the basic module (item no. 10024144)

Plus:• Spray attachment with 10 mm nozzle• Remote control extension cable, 16 m• Plastic case

4

Benefits at a glance • Faster and cleaner material application• Simple operation• Robust and handy design• Fast and simple cleaning• Ergonomic handle• Swivel joint for fatigue-free work• Integrated remote control switch• Can be connected to mixing and delivery pumps• Practical scaffold hook for suspending on scaffolding poles• Optional attachment for spraying

mineral and organic products• For grit sizes up to 4 mm

Accessories see page 6

inoCOLL PROOne-handed gun for application of bonding mortars and spraying up to 4 mm grit size

Technical data

Max. operating pressure 40 bar

Operating voltage 24 – 42 V

Max. delivery rate 15 l/min

Max. grit size inoCOLL PRO 4.0 mm

Weight 1.5 kg

The all-purpose inoCOLL PRO one-handed gun can be directly connected to all common mixing and delivery pumps. The mortar is applied to the ETICS insulation boards quickly and effortlessly. An integrated remote control switch enables the automatic activation or deactivation of connected silos or delivery / mixing pumps when the trigger is actuated. With the optional, handy and lightweight spray attachment, the inoCOLL PRO can be converted into a complete spraying device.

Areas of applicationApplication and spraying of bonding and basecoat mortars, and much more. (See table on page 5)

Basic moduleItem no. 10041950

Scope of deliveryinoCOLL PRO:• One-handed gun• Scaffold hook• Connecting plug for remote control cable• Hose piece• 2 sponge balls with a diameter of 20 mm• Operating instructions

Bonding / spraying setItem no. 10043000

Scope of deliveryinCOLL PRO bonding/spraying set:

As with the basic module (item no. 10041950)

Plus:• inoCOLL spray attachment with 10 and 13 mm nozzles• Remote control extension cable, 16 m• Plastic case

5

Applying bonding mortar

Applying basecoat mortar

Performing grouting work (e.g. exposed brickwork)

Performing filling work (e.g. fire dampers)

Spraying decorative coatings

Spraying sealing compounds

Spraying fine mortar

Final coats: spraying inoCOLL up to 1.5 mm

Final coats: spraying inoCOLL PRO up to 4 mm

Areas of application

inoCOLL inoCOLL PRO inoCOLL / inoCOLL PRO one-handed bonding gun one-handed bonding gun with spray attachment

6

AccessoriesSpray attachment for inoCOLL / PRO one-handed gun with GEKA air connection • For spraying mineral and paste-like products • With 10 mm nozzle

Item no.

10039322 P P

Spray attachment for inoCOLL / PRO one-handed gun with EWO air connection• For spraying mineral and paste-like products • With 10 mm nozzle

Item no.

10042332 P P

Nozzles for:

- Spray attachment for inoCOLL / PRO one-handed gun (10039322)

- Small spray pipe (10039887)

- Angled spray head with GEKA coupling (10039457)

- Spray pipe set (10039886)

• Made from stainless steel* For grit size up to 6 mm

Ø

4 mm

5 mm

6 mm

8 mm

10 mm

13 mm*

Item no.

10039271

10042461

10039220

10039221

10039222

10040941

PPPPP—

PPPPPP

Remote control extension cable without remote control switch • For remote control cable• For remote control switch

Length

16 m

32 m

Item no.

10015210

10042463

PPPP

Adapter for remote control cable• m-tec plug– Harting socket• m-tec socket – Harting plug

Item no.

10015121

10015120

PPPP

Sponge balls (soft version)• For cleaning material and mortar hoses

Ø

20 mm

30 mm

Item no.

10008116-003

10008116-004P—

—

PSponge balls (firm version)• For cleaning material and mortar hoses

Ø

30 mm

Item no.

10008116-007 P P

inoCOLL PROinoCOLL

ServiceServices from INOTEC

Silo technology functional and return testing

• Visual inspection

• Checklist-based inspection

• Emptying residual quantities in agreement with the customer

• Checking and, if necessary, replacing mechanical and electrical components

• Checking and, if necessary, replacing the water fitting

• Drawing up a test log and, if necessary, DGUV V3 testing

• Testing mobile equipment pursuant to the Ordinance on Industrial Health and Safety VDE 0701-0702

• Extensive visual inspection

• Measuring and determining the permissible values

• Separating work equipment with safety defects and discussing how to proceed with the customer

• Attaching the inspection plate if the inspection has been passed

• Drawing up a legally binding test report

• Defining the inspection intervals with the customer

• Making an inventory of the work equipment, if requested

• Customer fault reporting

• Providing support over the phone during the troubleshooting process, or if necessary deploying a service technician

• Service technician travels to the construction site with the ser-vice vehicle

• Rectifying faults, if this can be done on the construction site

• Creating assembly certificates with the following information: machine / travel time / kilometres / fault description / record of the spare parts / date / signature

Silo maintenance

Electrotechnical BGV A3 testing (DGUV V3)

Construction site applications

• Visual inspection and cleaning• Resetting / adjusting, lubricating and preserving• Replenishing or replacing the operating fluids• Replacing wearing parts (e.g. filters, seals, etc.) as scheduled,

if their expected service life is clearly sooner than the next main-tenance interval.

• Recording, procuring and replacing wearing parts• Should it be determined during the maintenance process that

parts are defective, the customer is contacted and an agreement reached on how to proceed. If the customer would like a repair, they are sent a cost estimate. The parts are then procured and replaced accordingly.

• Finally, a functional test and, if requested by the customer, a DGUV V3 test is performed.

• Extensive visual inspection• Testing to ensure safe working conditions• Visual inspection pursuant to BGV D 15 on devices up to 500 bar• Electrically testing the devices pursuant to VDE 701-702• Making an inventory of the work equipment, if requested

• Checking• Recording the parts to be replaced• Sending a cost estimate to the customerIf the customer decides to have the repair work carried out:• Procuring the parts• Replacing the parts • Functional testing and DGUV V3 testing, if necessaryIf the customer decides not to have the repair work carried out:• Assuming the costs incurred with the cost estimate

Maintenance of third-party and our own devices

Repairs

APR testing

• Explaining the machine technology• Offering advice on potential uses and applications• Explaining the various machine functions• Safety notices• Practical tips• Maintenance notices• Rectifying faults

Training courses and commissioning

Airless devices

Mixing pumps

Then you’re in the right place with the INOTEC machine rental fleet !

Give us a call.We would be happy to provide you with a quote.

Rental fleetDon’t buy, rent!

Continuousmixers

Delivery pumps

Smallsilo*

* with integrated 400 V continuous mixer and 400 V delivery pump

Don’t buy, rent!

Do you need a mixing pump or another machine for one-off

use on your construction site?Would you like to purchase a

machine but check the efficiency and performance

first?

99

LocationsYour sales partner (English language)

INOTEC GmbH(Headquarter)Daimlerstraße 9-1179761 Waldshut-TiengenGermanyPhone +49 7741 / 6805 675Fax +49 7741 / 6805 665E-Mail: j.tetling@inotec-gmbh.com

Wherever you are, we’re there, too.

Compressed air / compressors

INOTEC GmbH • Daimlerstraße 9-11 • DE-79761 Waldshut-Tiengen • Tel.: +49 77 41 / 68 05-0 • www.inotec-gmbh.com

Delivery pumps Mixing pumps Mixers Delivery systems

OWC technology

Silo technology

Airless devices Cutters Grinders One-handed guns

Power tools / electrical appliances

Heaters / air dehumidifiers / high-pressure

cleaners

Waste watersystems

Floorprocessing

Accessories &Spare parts

Product range