injector programming and peugeot injector... · citroen and peugeotcitroen and peugeot injector...
TRANSCRIPT
Autodiagnos LtdHopton Estate, London Road, Devizes, SN10 2EUTel: 0870 949 3799 Fax: 01380 732001 Email: [email protected]
Autodiagnos Limited is registered in England and Wales at Hopton Industrial Estate, Devizes,Wiltshire, SN10 2EU. Company No. 3062855
Citroen and Peugeot
Citroen and PeugeotInjector ProgrammingThis function is available on the Bosch EDC15C7 Diesel Injection system fitted to the following vehicles:
The purpose of this function is to enable the technician to replace a faulty injector, or injectors, and program in the value of the new injector to the Diesel Control Unit.
It may also be used when a new Control Unit has been installed and the technician is required to program it with the values of the injectors fitted.
This method gives each injector a classification of 1, 2 or 3. The classification relates to the operating conditions of the injector. The control unit stores the classification of the injectors fitted and adjusts the treatment of each injector depending on the classification. The purpose of this is to improve performance and emissions.
The values stored in the control unit and the values of the new injector(s) must match. If they do not the DTC P1301 will be present on the control unit and the MIL will flash.
On this system the classification of each injector should always be the same. For example they could all be classification 2 or they could all be classification 3, but if Injector 1 is classification 2 and Injector 2 is classification 3 this will cause a DTC to be stored and the MIL to flash.
Marque Model Engine Size Engine CodeCitroen Relay/Jumper 2.0D RHVCitroen Relay/Jumper 2.2D 4HY Citroen Relay/Jumper 2.8D 8140.63 Citroen Relay/Jumper 2.8D 8140.43S Peugeot Boxer 2.0D RHVPeugeot Boxer 2.2D 4HY Peugeot Boxer 2.8D 8140.43S