information procedure - ipq

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2017-11-01 to 2017-11-30

Register issued on : 2017-12-01

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A01: TOURIST SERVICES

Subsector : A01 Registration Date : 2017-11-21Organization : ASICountry : Austria

Project ID : 00027256/0001 Project Established

ICS : 03.080.30, 03.200National Ref : ÖNORM D 1150Title : Services of the leisure industry - Requirements for the training of dance teachers and

dance masters as well as for the management of ballroom dance schoolsScope : This ÖNORM sets minimum requirements for the training and exam of dance teachers and

dance masters as well as for the management of a dance school (facilities and curriculum).

Relatedness :National : New

** End of Subsector **

Subsector A05: MAINTENANCE SERVICES

Subsector : A05 Registration Date : 2017-11-09Organization : NENCountry : Netherlands


ICS : 97.020National Ref : NEN 2075:2017 nlTitle : Measuring system and process control system for cleaning performance Scope : This standard describes the measurement of quality for cleaning performance according to

objective criteria. With this sytem the performed quality can be compared with the prescribed quality.



Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2017-11-17Organization : TSECountry : Turkey

Project ID : t1012426/0002 Project Established

ICS : 03.080.30, 11.040National Ref :Title : Competent services - Medical devices - Rules Scope :

This standard includes rules for management technical equipment structrural characteristics and personnel characteristics of the compenent services of medical equipments


Subsector : A11 Registration Date : 2017-11-17

Organization : TSECountry : Turkey


ICS : 03.080.30, 11.040.30National Ref :Title : Competent services – Surgical instruments – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of surgical instruments used in health sector


Subsector : A11 Registration Date : 2017-11-17Organization : TSECountry : Turkey


ICS : 03.080.30, 11.040National Ref :Title : Private services - Medical devices - Rules Scope : This standard includes rules for management, structural features, technical equipment,

personnel specifications and certification of special services for medical devices



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2017-11-28Organization : UNICountry : Italy


ICS : 03.100.30National Ref : UNI1603735Title : Non-regulated professions - Professional profiles Human resources - Knowledge, skill

and competence requirementsScope : This standard specifies the requirements for the professional profiles Human resources, in

terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2017-11-21Organization : ASICountry : Austria


ICS :91.010.30, 91.080.40, 93.040

National Ref : ÖNORM B 1992-2Title : Eurocode 2 - Design of concrete structures - Part 2: Concrete bridges - Design and

detailling rules - National specifications concerning ÖNORM EN 1992-2, national comments and national supplements

Scope : This Austrian Standard specifies national parameters to ÖNORM EN 1992-2 and shall be applied jointly with ÖNORM EN 1992-2 in Austria. This standard describes the principles and requirements for safety, serviceability and durability of concrete structures, together with specific provisions for bridges.


Subsector : B02 Registration Date : 2017-11-28Organization : UNICountry : Italy


ICS :91.060.40, 91.140.01, 97.100.30, 97.100.40

National Ref : UNI1603704Title : In-service installations for civil use powered by liquid and solid fuel - Guidelines for

verifying suitability for safe operationScope : The standard establishes the criteria for verifying that the safety requirements of in-service

installations powered by solid and/or liquid fuels are fulfilled, regardless of the time of their installation, in order to determine whether the verified plant can continue to be used in its currentstate,withoutcompromisingsafety.The standard deals exclusively with the aspects of verification of installations and therefore it cannotbeusedasadesignstandard,norasaninstallationstandardorforretrofitting.The standard applies to domestic heating and/or cooking systems powered by liquid or solid fuel, with or without the production of domestic hot water, including the works for the evacuation of combustion products.


Subsector : B02 Registration Date : 2017-11-06Organization : UNMZ Draft Issue Date : 2017-09-19Country : Czech Republic Latest Date for Comments : 2017-10-31


ICS :National Ref :Title :

Bitumen and bituminous binders – Modified bitumens – Part 2: Crumb rubber modified bitumens

Scope : This standard contains the requirements of the Czech Republic for modified asphalt binders

usedinroadconstruction.Thisstandardconsistsofthreeparts:Part1:PolymersmodifiedbitumensPart2:CrumbrubbermodifiedbitumensPart3:SpecialmodifiedbitumenČSN657222-2specifiestypesofbitumensmodifiedwithcrumbrubber.Aninternationalstandard has not yet been developed for this part 2, only the draft CEN / TC 336 / N 689 that has been taken into account.



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2017-11-27Organization : SNV Draft Issue Date : 2017-11-16Country : Switzerland Latest Date for Comments : 2018-01-31

Project ID : CH170022/0001 Draft for public enquiry

ICS : 91.080.30National Ref : SIA 179Title : Fixings in concrete and masonry

Relatedness :National : REV/AMD SIA 179:1998

Subsector : B03 Registration Date : 2017-11-27Organization : SNV Draft Issue Date : 2017-11-23Country : Switzerland Latest Date for Comments : 2018-02-16

Project ID : CH170023/0001 Draft for public enquiry

ICS : 91.080.40National Ref : SIA 262/1Title : Concrete Structures – Supplementary specifications

Relatedness :National : REV/AMD SIA 262/1:2013


Subsector B04: CEMENT

Subsector : B04 Registration Date : 2017-11-24Organization : TSECountry : Turkey


ICS : 91.100.10National Ref :Title : Principles of Bulk Cement TransportationScope : This standard specifies the principles of transferring cement from the production line to the

transporting vehicle, transportation and preservation of the quality of bulk cement during these stages.



Subsector B13: SOLAR ENERGY



ICS : 91.140.10National Ref : ÖNORM M 7510-8Title : Checking of heating systems -- Part 8: Basic check of thermal solar systemsScope : The actual ÖNORM is to be used for basic checks of heating and warmwater Systems

combined with a thermal solar Systems and is only valid for the parts of the thermal solar system. The actual check described in this ÖNORM helps evaluating the correct functioning.



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY



ICS : 93.080.40National Ref : ÖNORM O 1051Title : Road lighting - Lighting of conflict areasScope : ÖNORM O 1051 is applicable to the construction of lighting system for safety crosswalk and

cyclists, roundabouts, divisional island and parking areas. Furthermore, Annex provides information on crossroads and lay-bys.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS :National Ref : 03200806Title : Gasfilters having a maximum working pressure of less or equal to 5 bar - Requirements

and testing

Relatedness :

National : New

Subsector : B25 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS :National Ref : 03200808Title : Gaskets for gas supply - Part 6: Gasket materials based on fibres, graphite or

polytetrafluoroethylene (PTFE) for gas valves, gas appliances and gas mains


Subsector : B25 Registration Date : 2017-11-10Organization : NSAICountry : Ireland

Project ID : NSAI1018/0001 Project Established

ICS : 91.140.40National Ref : I.S. 820:201xTitle : Non-domestic gas installations (Edition 3)Scope : This Irish Standard specifies the requirements for natural gas and LPG installations in

commercial and public access buildings at maximum operating pressures not exceeding 5 bar and industrial gas installations at maximum operating pressures not exceeding 0,5 bar, from the point of delivery up to and including the appliance(s) in non-domestic premises.

Relatedness :National : REV/AMD I.S. 820:2010

Subsector : B25 Registration Date : 2017-11-06Organization : NSAICountry : Ireland


ICS : 23.040.99National Ref : I.S. 328-2:201x Title : Gas transmission - Part 1, InstallationsScope : SeparationofcurrentparttwoofI.S.328intoaseparatestandard.

This Standard applies to the design, construction, inspection, testing, operation and maintenance of installations on pipelines used for the transmission of first and second family gases, i.e., manufactured towns gas, natural gas and substitute natural gas at maximum operatingpressureover16barandtemperaturesbetween-25oCand+120oCPipeline installations include but are not restricted to pressure-reduction stations, meter stations, pig-trap stations and block valves. Compressor stations and compressed gas filling stationsareexcluded.If the inlet pipework of the station is a service line and the maximum upstream operating pressure does not exceed 16 bar and the design flow rate is equal to or less than 200 m3/h undernormalconditions,EN12279applies.This Standard relates to conditions and practices currently in use in the transmission of gas. In addition materials and techniques of construction and operation are constantly being

improved. It is intended to keep these factors under continuous review. As a result amendments and supplements may be issued by the National Standards Authority of Ireland (NSAI)fromtimetotime.All activities covered by this code in relation to gas transmission pipelines and installations should comply with the requirements of all relevant safety, planning and environmental legislation.



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2017-11-13Organization : ASROCountry : Romania

Project ID : 0NP187.2/0001 Project Established

ICS :National Ref :Title : Storable bituminous mixtures. Material specifications



Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2017-11-08Organization : SIST Draft Issue Date : 2018-01-01Country : Slovenia Latest Date for Comments : 2018-02-08


ICS : 91.100, 91.100National Ref : oSIST 1031:2017Title : Flexible sheets for waterproofing - Bitumen sheets for waterproofing – RequirementsScope : SIST 1031 defines national requirements which supplement European standards and which

are not in conflict with them. The standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in our country.




ICS : 91.060.20National Ref : UNI1603784Title : Discontinuous roofing – Design criteria – Waterproofing elementScope : The standard takes in consideration the behaviour requirements of the waterproofing

element in a discontinuous roofing according to the effects and actions of the internal or

external agents. The standard provides a guidance for design of the element.

Relatedness :National : REV/AMD UNI 9308-1:1988



ICS : 91.060.20National Ref : UNI1603785Title : Building – Roofing – Terminology and classification of functional schemes, conform

solutions and technological solutions of discontinuous roofingScope : The standard show, defines and classifies the discontinuous roofing functional schemes,

reports the matrix of complying solutions and identifies the main conditions of characteristics design of the roofing complying solutions.

Relatedness :National : REV/AMD UNI 8627:2012



ICS : 91.060.20National Ref : UNI1603786Title : Builiding – Roofings – Analysis of functional components of discontinuous roofing and

design specifications for definition of technological solutionsScope : This standard provides instructions for design and choice of elements and layers of

discontinuous roof cooverings.




ICS : 91.060.20National Ref : UNI1603836Title : Building – Roofing – Terminology and classification of functional schemes, conform

solutions and technological solutions of continuous roofingScope : The standard show, defines and classifies the continuous roofing functional schemes, reports

the matrix of complying solutions and identifies the main conditions of characteristics design of the roofing complying solutions.



Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2017-11-28Organization : NBNCountry : Belgium

Project ID : BE664050/0001 Project Established

ICS : 91.100.30National Ref : prNBN B 21-606:2017Title : Precast concrete products – Floor plates – National application document to NBN EN

13747+A2:2010 and to NBN EN 15050+A1:2012

Relatedness :National : REV/AMD NBN B 21-606:2012European : Not Equivalent to EN 13747:2005+A2:2010



ICS : 91.100.30National Ref : prNBN B 21-606:2017Title : Precast concrete products – Floor plates – National application document to NBN EN

13747+A2:2010 and to NBN EN 15050+A1:2012




ICS : 91.100.30National Ref : prNBN B 21-612:2010/prA1:2017Title : Precast concrete products – Wall elements – National application document to NBN EN

14992+A1:2012



Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2017-11-28Organization : LVSCountry : Latvia


ICS : 91.080National Ref : prLVS 1053Title : Independent verification of construction design. Structural design checking.Scope : The standard regulates procedures for carrying out expert examination of building’s

structural components. The document describes the compulsory checking procedures and

the scope of office calculations stemming from the respective class of the building in question. The aim of the standard is to promote the standardization of the expertise process of the building structural units, making this process transparent and understandable to all the participants in the construction process.



Subsector B99: UNDETERMINED



ICS : 91.100.50National Ref : ÖNORM B 3662Title : Flexible sheets for waterproofing - Underlays for walls - National implementation of

ÖNORM EN 13859-2Scope : This standard is used for the implementation of ÖNORM EN 13859-2; It determines in clause

5 the minimum technical requirements for flexible sheets for waterproofing as underlays for discontinuous underlays for walls in terms of basic usability in Austria. The specific requirements for bitumen and plastic sheets that come in Austria for the application are in clause 6 and clause 7.




ICS : 91.100.50National Ref : ÖNORM B 3667Title : Flexible sheets for waterproofing - Synthetic vapour control layers - National

implementation of ÖNORM EN 13894Scope : This ÖNORM serves for implementation of the ÖNROM EN 13984. It determines in clause 5

the technical minimum-requirements for Synthetic vapour control layers in regarding to the in principal usability in Austria. The specific requirements on Synthetic sheets, which are used in Austria, are in clause 6.




ICS : 91.100.50National Ref : ÖNORM B 3668

Title : Flexible sheets for waterproofing - Synthetic damp proof courses - National implementation of ÖNORM EN 14909

Scope : This ÖNORM serves for implementation of the ÖNROM EN 14909. It determines in clause 5 the technical minimum-requirements for Synthetic damp proof courses in regarding to the in principal usability in Austria. The specific requirements on Synthetic sheets, which are used in Austria, are in clause 6.




ICS : 91.100.23National Ref : ÖNORM B 3407Title : Planing and execution of laying of tiles, flags and mosaicsScope : This Austrian Standard includes rules for design and execution of laying of tiles, flags and

mosaicsintheinteriorandexterioralsoonheatingfloorscreeds.ThewaterproofingforbuildingsisregulatedinÖNORMB3691andÖNORMB3692.ThecleaningservicesareregulatedinÖNORMD2210.The requirement for slipping is defined in ÖNORM Z 1261.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS : 07.100.30National Ref : DIN 10164-1Title : Microbiological examination of meat and meat products - Determination of

Enterobacteriaceae - Part 1: Spatula method (reference method)




ICS : 07.100.30National Ref : DIN 10164-2Title : Microbiological examination of meat and meat products - Determination of

Enterobacteriaceae - Part 2: Drop plating method


Subsector : C01 Registration Date : 2017-11-20Organization : LSTCountry : Lithuania


ICS : 67.120.10National Ref :Title : Meat productsScope : This standard gives general quality requirements for human consumption meat products

supplied to the market.


Subsector : C01 Registration Date : 2017-11-15Organization : SNCountry : Norway

Project ID : NOT17034/0001 Project Established

ICS : 67.120.30National Ref : NS 9444Title : Fish and fish products - Norwegian filet of white fish, frozen at sea - Product

requirementsScope : This standard specifies requirements and documentation of filet frozen at sea of white fish

with and without skin, with and without bones and with different cutting pattern


Subsector : C01 Registration Date : 2017-11-24Organization : TSECountry : Turkey


ICS : 67.060National Ref :Title : Turkish BaklavaScope : This standard specifies Turkish Baklava



Subsector C02: PAINTS AND RELATED PRODUCTS



ICS : 87.060.10National Ref : DIN 55912-2Title : Pigments - Titanium dioxide pigments - Part 2: Analytical methods



Subsector C99: UNDETERMINED



ICS : 71.120.10National Ref : DIN 28125-1Title : Round hinged closures - Part 1: Nominal diameter DN 150 to DN 800



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2017-11-09Organization : NENCountry : Netherlands


ICS : 29.240.01, 91.140.50National Ref : NEN 9191:2017 Concept nlTitle : Energy efficiency of low voltage installations Scope : NEN 9191 gives additional requirements, measures and recommendations for the design, the

construction and verfification of electrical low-voltage installations among which the local production and storage of energy for more efficiënt use of electricity.



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2017-11-24Organization : TSECountry : Turkey

Project ID : tst05729/0001 Project Established

ICS : 97.130.10, 97.140National Ref :Title : Steel single tier bolted shelvingScope : This standard covers steel cabinets up to 1000 mm x 400 mm table dimension.



Subsector H19: NON-ELECTRIC COOKERS AND BARBECUES

Subsector : H19 Registration Date : 2017-11-21Organization : ASICountry : Austria


ICS : 97.100.30National Ref : ÖNORM B 8311Title : Installation and construction of domestic heat generating systemsScope : This ÖNORM contains requirements for the installation and assembly of small furnaces

(heating appliances) for solid and liquid fuels up to maximum 50 kW of nominal heat output. These requirements apply to heating appliances according to of ÖNORM EN 1, ÖNORM EN 12815, ÖNORM EN 13229, ÖNORM EN 13240, ÖNORM EN 14785 and ÖNORM EN 15250 as well as to individually planned plants according to ÖNORM EN 15544.



Subsector H26: SEALING MATERIALS

Subsector : H26 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS :National Ref : 03200807Title : Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas

armatures and gas appliances; safety requirements, tests




ICS :National Ref : 03200809Title : Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic

foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing



Subsector H27: EDUCATIONAL EQUIPMENT



ICS :National Ref : 09500451Title : Satchels - Requirements and testing



Subsector H30: EQUIPMENT FOR CHILDREN

Subsector : H30 Registration Date : 2017-11-28Organization : UNICountry : Italy


ICS : 97.190National Ref : UNI1603279Title : Child use and care articles - Baby carriers - Safety requirements and test methods –

Baby slingsScope : This Standard specifies the safety requirements and test methods for baby slings without a

framedsupportdesignedtocarryachildwhenattachedtothecarer’storso.This standard applies to the following product categories: baby wrap; one-shoulder baby sling;meitai.This Standard does not apply to products covered by EN 13209-2. Baby slings are designed to allow the carer a hands free operation when standing and/or walking. These slings are for useuptoamaximumweightof18kg.


Subsector : H30 Registration Date : 2017-11-28Organization : UNICountry : ItalyProject ID : 01603838/0001 Project

EstablishedICS : 97.190National Ref : UNI1603838Title : Child use and care articles - Baby carriers - Safety requirements and test methods – Soft

carrier without incorporated integral leg openingsScope : This Standard specifies the safety requirements and test methods for soft carriers without a

framed support and without incorporated integral leg openings designed to carry a child whenattachedtothecarer’storso.This Standard does not apply to products covered by EN 13209-2. Children slings are designed to allow the carer a hands free operation when standing and/or walking. These slingsareforuseuptoamaximumweightof18kg.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS : 21.060.70National Ref : DIN 3016-1Title : Fastening clamps - Part 1: With tongue




ICS :National Ref : 06702299Title : Round wire snap rings for shafts




ICS :National Ref : 06702300Title : Round wire snap rings for bores




ICS :National Ref : 06702301Title : Snap rings with rectangular profile for shafts


Subsector : I02 Registration Date : 2017-11-17Organization : DIN

Country : Germany


ICS :National Ref : 06702302Title : Snap rings with rectangular profile for bores



Subsector I04: ROLLING BEARINGS

Subsector : I04 Registration Date : 2017-11-21Organization : ASICountry : Austria


ICS : 21.100.20National Ref : ÖNORM M 6320-1 Beiblatt 2Title : Rolling bearings - Explanation of the calculation method of the dynamic load rating and

basic rating lifeScope : This supplement provides additional background information on the derivation of formulas

and factors specified in ÖNORM M 6320-1 and ISO 281-1:2007 " Rolling bearings - Dynamic load ratings and rating life".



Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2017-11-27Organization : LVS Draft Issue Date : 2017-11-28Country : Latvia Latest Date for Comments : 2018-01-26

Project ID : 00058767/0001 Draft for public enquiry

ICS : 23.020.30National Ref : prLVS 416Title : Boiler equipment. Safety examination of existing assembliesScope : Standart defines the procedures of the technical supervision of the new and used boilers

installations. Standart is rrelevant relevant to the inspection`s institutions what according with the normative acts carry out the technical supervision. Sandart allows to make controls and defines the safety level of the boilers installation.

Relatedness :National : REV/AMD LVS 416:2012

Subsector : I06 Registration Date : 2017-11-28Organization : UNICountry : Italy


ICS : 23.020.30, 27.060.30National Ref : UNI1603813Title : Pressure equipment - Putting into service and use of pressure equipment and assemblies

- Part 10: Supervision of steam boilers and/or super-heated water generators excluded from the scope of UNI/TS 11325-3

Scope : This technical specification provides procedures for the supervision of fired or otherwise heated pressure equipment with the risk of overheating, intended for generation of steam and/or super-heated water at temperatures higher than 110 °C (“steam boilers and/or hot water generators”) at a maximum allowable pressure PS greater than 0,5 bar included in the scope of the Italian decree D.M. 329/2004 and excluded from the scope of UNI/TS 11325-3, and,also,havingthefollowingrequirements:a) unfired steam boilers and/or hot water generators in which the design temperature of the pressure bearing parts, that will come into contact with the heating fluid, is not lower than theheatingfluiditself;b)lowcapacityforced-circulationsteamboilersand/orhotwatergeneratorshavingPSxV≤3000bar·LandPS≤12bar;c)lowpressuresteamboilershavingPS≤1bar,heatingarea≤100m2andcapacity≤2t/h;d)lowpressurehotwatergeneratorshavingPS≤5bar,watermaximumtemperature≤120°Candcapacity≤2t/h;e)electricallypoweredsteamboilersand/orhotwatergenerators.The technical specification gives recommendations of operation and testing of the boiler both with and without the continuous presence of the boiler attendant, with a maximum time of operation without manual intervention of 72 hours.



Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2017-11-10Organization : NSAICountry : Ireland


ICS : 75.160.30National Ref : I.S. 3213:201xTitle : Code of Practice for the Storage of LPG Cylinders and CartridgesScope : This code applies to the keeping of LPG in containers where the total quantity stored

exceeds 15kg, but the general principles may be used when keeping smaller quantities. It also applies to containers on loaded vehicles parked other than on a public highway. The requirements of the Building regulations shall take precedence over any requirements of this Code.The contents of this document represent the general requirements for the safe storage of LPG cylinders and cartridges. However in specific circumstances the fire authorities may find it necessary ti impose additional safeguards.



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2017-11-21

Organization : ASICountry : Austria


ICS : 11.040.50National Ref : ÖNORM S 5240-12Title : Image quality assurance in X-ray diagnosis - Part 12: Acceptance testing of

mammographic X-ray equipmentScope : This ÖNORM contains parameter for acceptance testing of digital mammography systems,

describes testing methods, and defines extreme values as well as testing periods.




ICS : 11.040.50, 11.060.20National Ref : ÖNORM S 5240-5Title : Image quality assurance in X-ray diagnostics - Part 5: Constancy test in dental

radiographic technologyScope : This ÖNORM describes the constancy test in dental radiographic technology.




ICS : 11.040.50National Ref : ÖNORM S 5240-11Title : Image quality assurance in X-ray diagnosis - Part 11: Acceptance testing of dental

radiographic equipment - Limit valuesScope : This ÖNORM describes testing methods, parameter, extreme values for acceptance testing

on analog and digital dental radiographic equipment including DVT and defines testing periods.




ICS : 11.040.50National Ref : ÖNORM S 5240-7Title : Image quality assurance in X-ray diagnostics - Constancy testing on medical X-ray

equipments for mammographyScope : This ÖNORM contains parameter for constancy testing of digital mammography systems,

describes testing methods, and defines extreme values as well as testing periods.



Subsector I99: UNDETERMINED



ICS :National Ref : 01200665Title : Dispense systems for draught beverages - Part 1: General requirements



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2017-11-17Organization : TSECountry : Turkey


ICS : 85.080, 85.080.10National Ref :Title : Facsimile papersScope : This standard specifies the roll and sheet papers used to record in facsimile machines.



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS :National Ref : 06235092Title : Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements




ICS :National Ref : 06235158Title : Testing of liquid fuels - Determination of bromine acceptance by electrometric Dead-

Stop-method of samples with a bromine acceptance of more than 0,5 g/100 g (BA)




ICS :National Ref : 06235260Title : Lubricants - Lubricating oils - Part 1: Lubricating oils C, Minimum requirements




ICS :National Ref : 06235261Title : Lubricants - Lubricating oils - Part 2: Lubricating oils CL, Minimum requirements


Subsector : N03 Registration Date : 2017-11-24Organization : TSECountry : Turkey


ICS : 75.100National Ref :Title : Lubricating oils, industrial oils and related products (Class L) - Base oilsScope : This standard specifiee requirements and test methods for base oils



Subsector N05: TEXTILES



ICS : 59.080.30National Ref : DIN 53894-2Title : Testing of textiles - Determination of dimensional change of textile fabrics - Part 2:

Steaming on ironing machines



Subsector N06: RUBBER

Subsector : N06 Registration Date : 2017-11-21Organization : ASICountry : Austria


ICS : 83.060National Ref : ÖNORM ISO 2230

Title : Rubber products - Guidelines for storage (ISO 2230:2002)Scope : This International Standard gives guidelines for the inspection, recording procedures,

packaging and storage of products, assemblies and components made from vulcanized or thermoplasticrubberpriortobeingputintocirculation.It is applicable to both solid and cellular rubber products prepared from dry raw rubber, latex or other sources.



Subsector N09: PLASTICS



ICS :National Ref : 06235142Title : Testing of adhesives for metals and adhesively bonded metal joints - Determination of

the resistance to liquids



Subsector N14: PLASTICS PIPES



ICS :National Ref : 05401941Title : Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for cable ducting -

Dimensions and technical delivery conditions




ICS :National Ref : 05401942Title : Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions

and technical delivery conditions



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2017-11-27Organization : SIS Draft Issue Date : 2018-01-23Country : Sweden Latest Date for Comments : 2018-01-23


ICS : 11.140National Ref : 8760123Title : Health care textiles - Dress for staffScope : This standard specifies requirements, design and cutting patterns for dress for stafff in health

care.


Subsector : S04 Registration Date : 2017-11-27Organization : SIS Draft Issue Date : 2018-01-23Country : Sweden Latest Date for Comments : 2018-01-23


ICS : 11.140National Ref : 8760125Title : Health care textiles - Maternity trousers for staffScope : This standard specifies requirements, design and cutting patterns for maternity trousers for

staff in health care.



Subsector S07: ANAESTHETIC AND RESPIRATORY EQUIPMENT

Subsector : S07 Registration Date : 2017-11-28Organization : UNICountry : Italy


ICS : 11.040.10National Ref : UNI1603600Title : Pipeline systems for compressed medical gases and vacuum - Terminal units for

compressed medical gases and vacuumScope : This standard applies to terminal units in compliance with UNI EN ISO 9170-1 that are

intended to be used in pipeline systems for compressed medical gases and vacuum. This standard specifies dimensions of probes, sockets and gas specific connections points.

Relatedness :National : REV/AMD UNI 9507:2004;UNI 9507:2004


Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2017-11-09Organization : NEN

Country : Netherlands


ICS : 81.060.30National Ref : NEN 9102:2017 Concept nlTitle : Ceramic fibres - Determination of the presence and the concentration of respirable

refractory ceramic fibres Scope : NEN 9102 describes a method for: - the sampling and determination of the presence of

respirable refractory ceramic fibres; - the sampling and determination of the presence of the concentration of and exposure to respirabe refractory ceramic fibres.



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS :National Ref : 11904269Title : German standard methods for the examination of water, waste water and sludge - Sludge

and sediments (group S) - Part 18: Determination of adsorbed organically bound halogens (AOX) (S 18)





and sediments (group S) - Part 15: Determination of the specific residual beta activity a<(Index)R><Index beta>in sludge, sediment and suspended matter (S 15)





and sediments (group S) - Part 22: Determination of dry residue by freezing and

preparation of the freeze dried mass of sludge (S 22)


Subsector : S09 Registration Date : 2017-11-09Organization : NENCountry : Netherlands


ICS : 13.060.70National Ref : NEN 9406:2017 Concept nlTitle : Water - Methods in hydrobiology - Field analyses of macrofytes Scope : NEN 9406 describes the method for the analysis of samples of macrofytes in the field, the

processing of the collected data and the reporting of the metadata.



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2017-11-21Organization : ASICountry : Austria


ICS : 13.080.10National Ref : ÖNORM L 1087Title : Chemical analysis of soils - Determination of "plant-available" phosphorus and potassium

by the calcium-acetate-lactate (CAL)-methodScope : This Austrian Standard is used for the determination of the von "plant-available" phosphorus

and potassium in soils with pH >= 6. Excepted are soils used for forestal purposes.


Subsector : S24 Registration Date : 2017-11-21Organization : ASICountry : Austria


ICS : 13.080.20National Ref : ÖNORM L 1061Title : Physical analysis of soils - Determination of particle size distribution in mineral soilsScope : This ÖNORM is to be used for the determination of the mass fractions of grain size classes of

the mineral soil.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2017-11-17Organization : TSECountry : Turkey


ICS : 43.060.20National Ref :Title : Road Vehicles - Exhaust Pipes Muffler Scope : This standard covers exhaust pipes muffler used in road vehicles except motorcycle, moped,

tructors and military vehicles.

Relatedness :National : NewInternational : Modified SAE J 261:1987












Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 (Secondary Subsector)

Registration Date : 2017-11-24

Organization : TSECountry : Turkey


ICS : 91.100.10National Ref :Title : Principles of Bulk Cement TransportationScope : This standard specifies the principles of transferring cement from the production line to the

transporting vehicle, transportation and preservation of the quality of bulk cement during these stages.



Subsector T14: PACKAGING

Subsector : T14 Registration Date : 2017-11-17Organization : DINCountry : Germany


ICS :National Ref : 11501223Title : Packaging test - Compression test - Part 1: Test with a constant conveyance-speed




ICS :National Ref : 11501224Title : Packaging test - Leakage test on flexible packagings - Part 2: Colour method




ICS :National Ref : 11501225Title : Packaging test - Leakage test on flexible packagings - Part 3: Pressure drop method



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2017-11-13Organization : ASROCountry : Romania

Project ID : 001848-1/0002 Project Established

ICS : 93.080.01National Ref : SR 1848-1:2018Title : Road signalisation. Road traffic signs and signalisation tools Part 1: Classification,

symbols and locations

Relatedness :National : REV/AMD SR 1848-1:2011



ICS : 93.080.01National Ref : SR 1848-2:2018Title : Road signalisation. Road traffic signs and signalisation tools Part 2: Technical

requirements




ICS : 93.080.01National Ref : SR 1848-3:2018Title : Road signalisation. Road traffic signs and signalisation tools. Part 3: Design and

description



** End of Sector **




Sector X : UNDETERMINED STANDARDIZATION AREA





Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2017-11-28Organization : UNICountry : Italy


ICS : 35.020National Ref : UNI1603705Title : Enabling Technologies for Industry 4.0 – Integration and interconnection: main issues

and examplesScope : The Technical Report specifies operational definitions, and provides clarification and

examples to foster a convergent and converging interpretation of integration and interconnectionrequirements.The technical report introduces some definitions, provides some guidance on the main architectures and needs to be analyzed in the implementation of an integrated and connectedsystem,andsomesimplecases.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

information procedure - ipq

Documents