Industrial Product Information

EXCLUSIVE CANADIAN DISTRIBUTOR FOR SUREHOLD ADHESIVES

Stud & Bearing formula is a high strength, thread-locking anaerobic material that cures and locks between threaded connections to lock seal and retain. Resists leakage, shock and vibration. Ideal for fasteners 3/8” to 1” prior to assembly.

Locks, seals and secures parts that must withstand heavy shock and vibration. Permanent strength – for assemblies that do not require frequent disassembly Keep nuts and bolts from coming loose Prevents rust and corrosion Conforms to MIL-S-46163A, ASTM D-5363, NSF

Patented Dispenser Drip-Proof, Clog-Proof Applicator, product won’t clog or dry up with

repeated use Push the button on tube cap to puncture seal, twist off cap and

apply Precise and controlled distribution of the threadlocker Minimum clean up, tube pulls the threadlocker back into the tube

when you release pressure A Minimum of 12 months shelf life once product has been opened

and used

Use on engine bolts and fittings, inner tie rods, transmissions bolts, power steering, frame bolts, idler bearing, press fit filter tubes, shock absorber bolts, ring gear bolts, cylinder block studs, crank shaft bolts and more. Automobiles, RV’s and Recreational Equipment Farm Machinery Heavy Duty Power Tools

Red Threadlocker

An all-purpose, medium strength thread-locking anaerobic material that cures and locks between threaded connections. Resists leakage, shock and vibration. Ideal for all nut and bolt applications 1/2” to 3/4”

Eliminates the need for lock nuts and lock washers. Easy disassembly - can be removed with hand tools Locks and seals while preventing parts from loosening

due to shock and vibration Prevents rust and corrosion Conforms to MIL-S-46163A, ASTM D-5363, NSF.

Patented Dispenser Drip-Proof, Clog-Proof Applicator, product won’t clog or

dry up with repeated use Push the button on tube cap to puncture seal, twist off

cap and apply Precise and controlled distribution of the threadlocker Minimum clean up, tube pulls the threadlocker back

into the tube when you release pressure A Minimum of 12 months shelf life once product has

been opened and used

Use on all types of nuts, bolts and threaded connections on vehicles, power tools, bicycles, and more. Not recommended for use on plastic threads, nuts or bolts.

Blue Threadlocker

Low Odor, Low Blooming Cyanoacrylate Adhesive

• Industrial Strength

• Excellent for use on applications where appearance matters

• Leave little to no white residue when dry• Eliminates frosting and odors typically associated

with super glues 

• Works on numerous surfaces and can be used for bonding a variety of plastics, metals and rubbers especially where a good cosmetic outcome is desired.

• Use on electrical components, circuit boards and automotive applications

• Great for use in areas with poor ventilation• Excellent for use in 3D printing process – set and seal

images in the final stages

• Low Odor, Low Blooming Cyanoacrylate Adhesive is a one-component, solvent-free system and does not require the use of a catalyst, heat or clamps

• Slower setting super glue allows you to adjust parts• Dries to a transparent, colorless to straw color

• Part No. SH-201 (20gr)* * larger sizes available

  

Low Odor, Low Blooming CA Adhesive

Surface Insensitive Super Glue

• Industrial Strength

• Specially formulated for bonding dry, porous and acid surfaces, such as

• Wood, paper-made products, PU foam, cork, rubber and ceramics

• Designed for the assembly of difficult to bond substrates that require high shear strength

• For use on applications that require rapid bonding between well mated surfaces such as rubber, metal, plastic, glass, etc.

  • Bond porous or absorbent materials such as

wood, paper and fabric. • Fast setting and is suitable for continuous or

automated production lines• Dries to a transparent, colorless to straw color

• Part No. SH-601 (20gr)** larger sizes available

Surface Insensitive CA Adhesive

• Industrial Strength

• Designed for use in higher temperature and higher humidity environments

• A rubber toughened, high viscosity cyanoacrylate that can be used where flexibility and vibration resistance is required.

 

• Suitable to bond difficult materials such as thermal plastic and possess faster fixturing than epoxy resin, making it ideal for construction work

• Ideal for bonds subject to daily use and harsh conditions

 • Forms a strong bond when a thin layer of

SUREHOLD® B680 is applied between two surfaces and comes into contact with atmospheric moisture

• a rapid polymerization occurs producing the ultimate bond

• Works best on: Metal, Rubber, Wood, Plastic & other materials

• Dries black

• Part No. SH-B680 (20gr)** larger sizes available

B684

Rubber Toughened CA Adhesive

Page 7

Industrial/Commercial Grade Adhesives

6011

Industrial Strength

Medical Device Cyanoacrylate Adhesiveo Formulated for the assembly of components in a medical

deviceo Certified to meet ISO 10993 biocompatibility standards

o Certificates of Compliance are available

o This single component ethyl cyanoacrylate cures rapidlyo No mixing or heating required for cureo High Strengtho Instant Bondo Flexible Adhesiveo Low viscosity, 100 cPs

o Bonds well mated surfaces such as rubber, metal, plastics, glass, composites and moreo Also bonds porous or absorbent materials such as wood, paper and fabric

o Part No. SH-6011 (20gr) shown** larger sizes available

CyanopoxyTM

Super RepairSuper Repair for Metal

Super Repair Gap Filler

Super RepairFlexible

Instant Adhesive Instant Adhesive Instant Adhesive Instant Adhesive

Multi-substrate. Ideal for plastic parts (i.e. auto bumpers and panels)

Targeted Substrate (Aluminum/Metal)

Fills gaps, cracks and gouges on porous and irregular surfaces

Flexible/Elastic/Bond/Seal

• These four new hybrid adhesives were designed to incorporate the fast cure speed of cyanoacrylates with the strength and durability of epoxies. 

• With these four formulations you can bond almost anything including tough to bond plastics with the polyphen primer, metal, alloys, cast iron, aluminum, wood, concrete, brick, stone, rubber, fabric, cloth and more!

• High Strength• Easy to Use – Precision Application• Use for Assembly & Repair• Can be drilled, tapped, sanded and painted

Helios Light Cure Adhesives

SureHold’s® HeliosTM Light and Moisture Cure Cyanoacrylate is a fast curing, low blooming, multiple viscosity, clear to pale green adhesive designed for OEM assembly applications that require a low out-gassing for sensitive electronics, excellent aesthetics, very rapid fixturing, fillet cure or surface cure.

The light cure properties facilitate rapid curing of exposed surface areas, thereby minimizing assembly time, the unique formulation insure reduces blooming during the secondary cure providing an alternative to solvent borne accelerators. Suitable for use in the assembly of disposable medical devices, sensitive electronics, and hearing aids.

ISO 10993 Certified Features & Benefits• Odorless• Extremely fast tack-free curing in 2-5 seconds• Cures with UV/Visible light; cures in shadowed areas• Good cosmetic appearance• Good for sensitive electronic assembles• Eliminates need for accelerators• Good adhesion to plastics, elastomers and metals• ISO 10993 Biocompatible

 

 

 

 

  

 

  

 

 

 

 

         

 

  

 

Page 10

Impregnating & Sealing CA Adhesive

EXCELLENT FOR USE ON APPLICATIONS WHERE APPEARANCE & STRENGTH MATTER

 

• Transforms the once brittle models making your creations POP and STAND OUT with COLOR • Our patent pending process infuses and impregnates the 3D printed models making them strong,

durable and long-lasting • Eliminates frosting and odors typically associated with super glues• Low out-gassing . . . Great for use in areas with poor ventilation• A single-component, one-part room temperature cure, solvent-free system that does not require the

use of a catalyst, heat or clamps• Color: Transparent, colorless to straw color

• 3DFix is great for impregnating your gypsum-based 3D printed models • Wicking grade, low out-gassing instant adhesive• Designed for added strength, durability and sealing that provides a low cost, value added advantage• Make your 3D models up to 6 times stronger in tensile strength! • This process is ideal for stop motion animation models, prototypes, professional and architectural models,

engineering models, consumer product models, fine art production; and, of course, assembly applications with high cosmetic appearance!

 

LOW ODOR, NON-BLOOMING, LOW VISCOSITYINDUSTRIAL STRENGTH CA ADHESIVE

3DFix Activator

Use SureHold’s 3DFix Activator to accelerate the cure of 3DFix CA Adhesive as well as other CA Adhesives.

3DFix Activator  is used to increase and assure proper cure  of all Cyanopoxy  adhesives o Contains a special catalyst with aggressive cleaning and

degreasing properties to remove surface contamination.

It can be either pre- or post-applied o The product is especially suited for post-application on

Cyanopoxy adhesives to ensure rapid and complete curing.

o Pre applying is recommended on porous, large bond gaps, inert surfaces or contaminated surfaces.

Excellent for cosmetic application where aesthetic (clear and transparent fillet) are needed.

3DFix Activator is especially suited for post applied applications. o Speeds the cure time of high viscosity CA Adhesiveso Aids CA Adhesives in bonding difficult to bond substrates