industrial machinery co. - secure … · tool dealer including (500+) machine tools, cnc machinery,...

OWNER RETIRING AFTER 80 YEARS INVENTORY LIQUIDATION OF MACHINETOOL DEALER INCLUDING (500+) MACHINE TOOLS, CNC MACHINERY, MILLS, LATHES,

GRINDERS, DRILLS, SAWS, FABRICATING EQUIPMENT, LIFT TRUCKS, LARGE SCRAP OPPORTUNITY

OWNER RETIRING AFTER 80 YEARS INVENTORY LIQUIDATION OF MACHINETOOL DEALER INCLUDING (500+) MACHINE TOOLS, CNC MACHINERY, MILLS, LATHES,

GRINDERS, DRILLS, SAWS, FABRICATING EQUIPMENT, LIFT TRUCKS, LARGE SCRAP OPPORTUNITY See Instructions on Page 3

To Become a Qualified Bidder on the Internet

(32) Hydraulic & Hand SurfaceGrinders

(50) Vertical & Horizontal Band Saws **Haas Model VF3 CNC Vertical MachiningCenter

**1/2” x 10’ Accurshear Model 850010Hydraulic Power Squaring Shear

40”/47” x 180” Cutmaster Model GML-40180HLB6 Gap Bed Engine Lathe

(35) Engine Lathes to 40” Swing and 234” Centers, Gap, Taper, Tooling

Owner Retiring – After 80 Years In Business

INDUSTRIAL MACHINERY CO.INDUSTRIAL MACHINERY CO.500 N. Stanwood Rd. – Columbus, Ohio 43209

Off I-670 near John Glenn International AirportOVER (500) MACHINE TOOLS

SALE DATE: WEDNESDAY, OCTOBER 4TH, STARTING AT 10:00 AMSALE DATE: WEDNESDAY, OCTOBER 4TH, STARTING AT 10:00 AMINSPECTION: TUESDAY, OCTOBER 3RD FROM 10:00 AM TO 4:00 PM

NEW2014

NEVERINSTALLED

(35)ENGINELATHES

NEW2003

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

1749600G CIA Industrial Machinery Co-6 9/11/17 9:21 AM Page 3

WEDNESDAY, OCTOBER 4THWEDNESDAY, OCTOBER 4TH

CNC MACHINING CENTERS**(6) Kia Model V-25P Two-PalletCNC Vertical Machining Centers; s/n25121, Fanuc 0i-MB, (2) 11.8” x 25.6”Tables, 16” x 11” x 15” Travels, 8,000 RPM,Rigid Tapping, 40 Taper, 16-Pos. ATC,Stock #8049 (Parts Only - 2003), s/n 25141(2000), s/n 25225 (Servo Issues), s/n 25232and s/n 25121 (1997)

Republic Lagun Model 4824 CNCVertical Machining Center; Acramatic2100 Control, 24” x 48” Table, 46” x 24” x23” Travels, 5,000 RPM, 40 Taper, 24-ATC(1998)

**Haas Model VF3 CNC VerticalMachining Center; 18” x 48” Table, 40” x20” x 25” Travels, 7,500 RPM, 20 HP VectorDrive (1995)

Chevalier Model 2040-MV CNCVertical Machining Center; s/n MV-873007, 13” x 54” Table, Fanuc 0-MDControl, 40” x 22” x 28” Travels, 6,000RPM, 16-Pos. ATC

Matsuura Model RA-2-DC Twin-Spindle Two-Pallet CNC VerticalMachining Center; Yasnac Control, (2)15” x 23” Tables, 23” x 16” x 18” Travels,7,000 RPM, Ridgid Tapping (1998)

Yang CNC Vertical Machining Center;Mitsubishi Control, 16” x 40” Table

Mazak Model Mazatech H400 Two-Pallet CNC Horizontal MachiningCenter; Mazatrol (Needs Repair)

(10) CNC Vertical Milling Machines;Millport w/ Proto Trak, XLO w/ DynapathAutocon, Chevalier (Missing Control),Milltronics Partner w/ Centurion, ManyOthers

CNC LATHES AND TURNING CENTERS36" x 96" Mazak Powermaster FlatBed Lathe w/ Approx. 8" Bore; 8” BoreApprox., 45-KW, Fanuc 6T Control

32” x 120” Acra Model CET-3212Flat Bed CNC Lathe; s/n 99021,

Mitsubishi Control

26” x 80” Mazak Model M5 Flat BedCNC Lathe; Mazak CAM T2 Control, 15”Chuck, 8-Pos. Turret, 25-HP

**20” x 60” Daewoo Model PAN-20Flat Bed CNC Lathe; Fanuc 6M Control,12” Over Cross Slide, 12” Chuck

**Hitatchi Seiki Model Hi-Tec Turn20 SII CNC Turning Center; SeicosControl

(2) Kia Model Kiaturn 21 CNCTurning Centers; Yasnac Control, (1)Parts Only

Yang Model SML-12 Gang Tool CNCTurning Center; Mitsubishi Control, 13”Swing, 5.3” x 5.9” Travels (1997)

16” x 40” Nardini Model Fast TraceFB CNC Lathe; s/n 9431, Fanuc 20-TControl (1995)

Mori Seiki Model SL-2B CNC TurningCenter; s/n 670, Fanuc 6T Control, ColletChuck, 10-Pos. Turret

Victor Model TNS-2H CNC TurningCenter; Fanuc 10T Control, 10” Chuck,22” x 20” Cap., 10-Pos. Turret, Tailstock

Kia Model Kiamaster 4NEII-600 CNCLathe; Fanuc 3T Control, 10” Chuck, 16”Swing Bed, 24” Swing Gap, 40” CC

LATHES – 66” TO 20”SWING40”/47” x 180” Cutmaster ModelGML-40180HLB6 Gap Bed EngineLathe; s/n 142, 6” Hole, 27” Swing OverCS, Taper, 20 HP, 20” x 25” Chucks, Steady(New 2014 - Never Installed)

40”/66” x 60” Fuji Gap Bed EngineLathe; 28” Over Cross Slide, 58” Chuck,DRO, Pendant

36” x 192” Wickes Brothers Lathe;36” Chuck

34”/40” x 120” Samstan CW6280DGap Bed Engine Lathe; 6,000 - 8,000RPM, Tailstock, Steady Rest, 20 HP

30” x 234” Sidney, Taper, Steady, 24”Chuck

26” x 144” Leblond Regal, Taper, 12”Chuck, Steady

(2) 26” x 72” Leblond, Taper, 18”Chuck

(2) 22”/31” x 120” Tarnow, Taper, 16”Chuck

22” x 126” American Pacemaker,Taper and 21” Chuck

22” x 80” Springfield, Taper, 12” Chuck

21” x 60” Reiden, Taper, 12” Chuck

20” x 120” Lion 20-MS-4 EngineLathe20”/28” x 72” TOS Gap Bed

LATHES – UNDER 20”SWING(20) Engine Lathes From 19” x 102”to 13” x 30” By Leblond, AmericanPacemaker, Monarch, TOS, Lagun,Andry Chow and Others; Warner andSwasey No. 5A Turret Lathe, 19” x 102”Leblond, Taper, 12” Chuck, 19” x 80”Leblond, Taper, 12” Chuck, 19” x 54”American Pacemaker, Taper, 12” Chuck, 19”x 54” American Pacemaker, 18” x 102”Monarch, 18”/28” x 60” Andry Chow, 17” x60” Takang, 16” x 60” Summit, 16” x 60”Lagun, 16” x 54” Monarch, 16” x 36”Carroll Jamison, 15” x 54” Leblond EngineLathe; Taper, 12” Chuck, 15” x 30” Sheldon,14” x 48” C-J Co., 14” x 78” Axleson w/Taper and 12” Chuck, 13” x 40” MSC, 13” x36” South Bend

BORING MILLSButler Elgamill Model T UniversalVertical / Horizontal Mill; s/n 27810,30” x 84” Table, 71” x 39” x 38” Travels,Universal Milling Head, DRO, Pendant(1975)

4” Giddings and Lewis Model 340TTable Type Horizontal Boring Mill; s/n6492, 48” x 74” Table, 42” Vertical

Yang Model SML-12 Gang Tool CNC Turning Center

Matsuura Model RA-2-DC Twin-Spindle Two-PalletCNC Vertical Machining Center

16” x 40” Nardini Model Fast Trace FB CNC Lathe

Republic Lagun Model 4824 CNC VerticalMachining Center Chevalier Model 2040-MV CNC

Vertical Machining Center**(6) Kia Model V-25P Two-Pallet CNC Vertical Machining Centers

(30) Conventional Vertical Milling Machines by Bridgeport, Alliant, Supermax, Lagun, South Bend and Others from 1/2 HP to 3 HP

Complete Listing With Photos @ cia-auction.com


INDUSTRIAL MACHINERY CO.INDUSTRIAL MACHINERY CO.

3-3/4” Cincinnati Gilbert Model T-350 Table Type Horizontal BoringMill; 42” x 78” Table, 60” Vertical, DRO

(2) 3” Devlieg Model 3B-48Horizontal Boring Mills; 30” x 48”Tables

Lucas No. 41 Table Type HorizontalBoring Mill w/ 36” x 42” Table andOutboard Support

MILLING MACHINES –VERTICAL AND HORIZONTAL(30) Conventional Vertical MillingMachines by Bridgeport, Alliant,Supermax, Lagun, South Bend andOthers from 1/2 HP to 3 HP(20) Horizontal Dial Type HorizontalMilling Machines; K-T Model 205/S-12w/ 12” x 56” Table, Cincinnati No. 2 w/ 12”x 54” Table, Republic Lagun Model UP w/9-3/8” x 45” Table, K-T No. 2 w/ 13-1/2” x56” Table, Gorton Model 3-34 w/ 14” x 62”Table, Milwaukee Model H w/ 10” x 50”Table, Stanko w/ 12” x 51” Table,Kempsmith w/ 10” x 45” Table, Polamco w/16” x 79” Table, Cincinnati Cinonova w/12” x 56” Table, Index w/ 9” x 40” Table,Induma “Super Mill” w/ 17” x 86” Table,Van Norman No. 2 Universal Horizontal /Vertical Mill, (6) Other Misc. Mills

(15) Dial Type Vertical MillingMachines; Sharpe KR Model VBM-AL w/18” x 76” Table, Cincinnati No. 4 w/ 16” x78” Table, Gorton Mill w/ 15” x 76” Tableand 50 Taper, Kempsmith Model KNVA w/20” x 76” Table, 50 Taper and 30 HP,KandT Model 15HP-3CK w/ 15” x 64”Table, Pratt and Whitney Model B Slotter w/19-1/2 Rotary Table, KandT Model 10HP-2CK w/ 12” x 56” Table and 50 Taper,Milwaukee Model H-No2 w/ 10” x 50”Table and 50 Taper, OKK Model MH-3 w/14” x 65” Table and 50 Taper, CincinnatiNo. 3 w/ 15” x 62” Table and 50 Taper

DRILLS – ALL TYPES(15) Radial Arm Drills by Carlton,American, Bickford, Willis andOthers from 5’ to 2’; 15” x 60” Carlton,13” x 60” American, 13” x 48” Haeda, 13” x48” Caser, 13” x 48” American, 11” x 48”Gilbert, 10” x 48” TPR, 10” x 40” Select, 9”x 36” Bickford, 9” x 36” Willis (1999), 8” x30” Archdale, 8” x 28” Kao Ming (1986)

(5) Heavy Duty Sliding Head BoxColumn Single Spindle Drills; 26”Buffalo, 24” Footburt, 28” GandL Bickford,(2) 24” Bickford

(25) S.S. Floor Drills by Clausing,Powermatic, Dayton and Others(10) Multi-Spindle Drills by Avey,Clausing and Rockwell from 2 to 6-

Spindle and 10’ Tables26” Solberga Model SE1340 Two-Spindle Geared Head Drill w/ 36” x88” Table

SURFACE GRINDERS(3) Gallmeyer and LivingstonHydraulic Surface Grinders; 12” x 24”No. 45, 12” x 24” No. 483 and 12” x 36”No. 55

18” x 28” Millport Model FSG-1828AD Hydraulic Surface Grinder;Walker Magnetic Chuck, Incremental

12” x 24” Gardner Model 1224 Two-Axis Automatic Hydraulic SurfaceGrinder w/ Electric Chuck12” x 24” Victor Model 3060AHHydraulic Surface Grinder; PB Control(1988)

K.O. Lee Model SZ818-HS Slicing andDicing CNC Surface Grinder; Leematic2000 Control

Abwood / Stoffell Vertical SpindleRotary Surface Grinder; 6” x 18” Chuck

36” Blanchard No. 18 Rotary SurfaceGrinder; s/n 10806

(25) Hand Feed Surface Grinders byParker Majestic, Harig, K.O. Lee,Boyar, Reid, Brown and Sharpe andOthers from 5” x 10” to 8” x 24”

(15) Dial Type Vertical MillingMachines

3-3/4” Cincinnati Gilbert Model T-350 Table Type Horizontal BoringMill

Butler Elgamill Model T UniversalVertical / Horizontal Mill

WEBCAST BIDDER INSTRUCTIONS➢ Bidders in the United States will receive approval forms from our office upon registering for

the auction on www.bidspotter.com, pending the Auctioneers review of the information pro-vided you will be approved at the Auctioneers discretion.

➢ Bidders outside of the United States must post a deposit ofapprox. 25% of their planned spending budget or $2,500.00minimum with Cincinnati industrial auctioneers in order to beapproved to bid. Those who do not post the deposit will notbe approved. period.

(35) Dial Type Vertical & Horizontal Mills

(20) Engine Lathes From 19” x 102” to13” x 30”

(35) Engine Lathes to 40” Swing and 234” Centers, Gap, Taper, Tooling


www.cia-auction.comwww.cia-auction.com

(5) Heavy Duty Sliding HeadBox Column Single SpindleDrills

12” X 24” GardnerHydraulic SurfaceGrinder

(3) Gallmeyer and Livingston Hydraulic SurfaceGrinders

K.O. Lee Model SZ818-HSSlicing and Dicing CNCSurface Grinder

**11” x 20” Elgin O.D. Grinder

CYLINDRICAL AND TOOLGRINDERS12” x 72” Cincinnati Milacron ModelDE Universal Hydraulic CylindricalGrinder; s/n 35323F-76-0001, 5 HPSpindle, Power Workhead

5” x 12” Covel O.D. Grinder**11” x 20” Elgin O.D. GrinderHeald No. 75A I.D. Grinder**Cuttermaster Model MG-30 EndMill Sharpener**K.O. Lee Model 8900x Tool andCutter Grinder**Denver Model Astro II Tap Grinder**Cincinnati No. 2 Tool and CutterGrinder**Oliver Adrian Model 600 DrillGrinder

SAWS – ALL TYPES(20) Vertical Band Saws to 36” byDoAll, Tannewitz, Rockwell,Powermatic and Others18” x 25” HEM Model V150AAutomatic Tilt Frame Band Saw; s/n659499, Auto Bar Feed, 1-1/2” Blade, 10 HP,Power Clamping

16” x 16” Amada Model HA16Automatic Horizontal Band Saw; s/n401860, 1-1/4” Blade, Automatic Bar Feedand Clamping (1994)

14” x 20” HEM Model 1200AAutomatic Horizontal Band Saw; s/n305789, Automatic Feed and Clamping, 7HP

12” x 12” Hyd-Mech Model H-12AAutomatic Horizontal Band Saw; 1-1/4” Blade, Power Clamping and Infeed

10” x 18” Magna Model 1018Horizontal Band Saw; New Never Used

(20) Horizontal Band Saws byKalamazoo, Wells, Kysor Johnson andOthers From 5” x 10” to 9” x 18”Marvel No. 18/M1 Power Hack Saw14” Kalamazoo Model FS-350SA ColdSaw; s/n 13797, Power Clamp

(2) 20” Everett Model 20DM22Abrasive Saws; 20 HP

(20) Abrasive and Cold Type Cut-OffSaws by Everett, Stone, Pedrazoli,Omes and Others from 4” to 20”

SHEARS AND BRAKES3/4” x 10’ Pacific Model 750-S10Hydraulic Power Squaring Shear1/2” x 10’ Accurshear Model 850010Hydraulic Power Squaring Shear; s/n4524, Programmable Back Gauge (2003)

**1/2” x 12’ Pacific Model 500-S12Hydraulic Shear; s/n S10035, FOPBG, NoPit

1/4” x 10’ Atlantic Model HDSx10-1/4Hydraulic Power Squaring Shear; s/n35664, Programmable Back Gauge

1/4” x 10’ Pexto Model 10UH25Hydraulic Power Squaring Shear; s/n736660, FOPBG

1/4” x 10’ Heller Hydraulic SquaringShear3/16” x 10’ Tru-Fab Model 57-120Hydraulic Power Squaring Shear; s/n______, FOPBG

3/16” x 12’ Cincinnati Model 1412Auto-Shear Mechanical PowerSquaring Shear; s/n 37974, FOPBG

50 Ton x 8’ Cincinnati Model 3-50Mechanical Press Brake10’ Chicago Model SBA-10YHydraulic Roto-Die Style Press Brake(3) 3’ and 4’ Mechanical Press Brakesby Di-Acro and OthersPress Brake Dies and Shear Blades

FABRICATING EQUIPMENT**Ercolina Type TOP-030 HorizontalTube Bender w/ Mandrel ExtensionTable100 Ton Mubea Model HIW1000/610Hydraulic Ironworker; Flat, Bar andAngle Shears, Coper / Notcher (2005)

100 Ton Geka Hydracrop 100SHydraulic Punch

125 Ton Buffalo No. 2-1/2 MechanicalIronworker; 6” x 6” x 1/2” Angle, Punch,Flat and Bar Shears

5’ x 10’ Lockformer CNC Plasma Tablew/ Hypertherm Max 100 Power Supply12 Ga. Thor Model 2018 Hand TurretPunchRockford Model 110-009 PortableHydraulic C-Frame Punch1/4” x 10’ Lown Pyramid Style PlateRoll4” Wide Lockformer 8-StandRollformer; s/n 142, 18 Ga.

Tin Knocker Cleat Former; 22 Ga. SCleat, 20 Ga. Drive Cleat

(20) Various Welders by Miller,Lincoln and Hobart

PRESSES – ALL TYPES100 Ton Approx. Four-Post HydraulicPress; 48” x 89” O.A. Bed, 30” x 72” Bet.Tie Bar

Approx. 75 Ton Logan Model S58803Four-Post Hydraulic Press; s/n 47179,8” Bore, 30” Stroke, 36” x 112” O.A. Bedand Ram, 96” Bet. Tie Bars, Hydraulic Unit

(10) H-Frame Presses to 75 Ton byDake, Ajax and Others, Air, Electricand Hand Power15 Ton Denison Model HA15 C-FrameMultipress; 12” Stroke, 25” x 16” Bed(1994)

8 Ton Hannifan Model HSB-6x7x7.5C-Frame Hydraulic Press; 12” Stroke,14” x 22” Bed

6 Ton Denison Model R065 C-FrameMultipress; 10” Stroke

**6 Ton Magnum Model HBM6A C-Frame Hydraulic Press; 1” - 7” Stroke,PLL (2008)

25 Ton Rousselle No. 3 OBI Press; 2”Stroke, 14” x 20” Bed

12” x 72” Cincinnati Milacron Model DE UniversalHydraulic Cylindrical Grinder

(15) Radial Arm Drills by Carlton, American, Bickford, Willis and Others from 5’ to 2’

(25) Hand Feed Surface Grinders from5” x 10” to 8” x 24”

LARGE SCRAPOPPORTUNITY



DUST / MIST COLLECTORS7.5 HP Trion Model Fred-02-IascPortable Fume Collector (2004)(10) Dust Collectors from 3/4 HP to10 HP, Most by ToritUnitair Air Specialist Portable FumeCollector

MISC. MACHINERY ANDEQUIPMENTBlast Cabinets to 48” (10) Arbor Presses by Atlas,Greenerd, Famco and Others(50) Grinders and Sanders of AllTypesEngis Model 515-14 Two-SpindleDiamond Hone; s/n 26170**Agie Elox Agietron Compact 2 DieSinker EDM; s/n 022.002Lan-Tech Model Q300 Rotary PalletStretch Wrap Machine; s/n QM009605,64” Dia. Table

AIR COMPRESSORS(2) 60 HP Atlas Copco Model GA45Cabinet Enclosed Air Compressors;132 PSI, 266 CFM (2002 and 2005)(20) Horizontal Tank AirCompressors from 5 to 30 HP byIngersoll Rand, Speedaire, Kellogg,Curtis, Worthington, Atlas Copco andQuincy(10) Vertical Tank Air Compressorsfrom 5 to 10 HP by Quincy, CampbellHausfeld, Champion and Sanborn

STRAIGHT TRUCKS1996 Chevrolet Model Kodiak 7500Single Axle Straight Truck; Vin#1GBJ7H1J5TJ106551, Cat. Model 3116/6.6L Diesel Engine, 6-Speed ManualTransmission, 8’ x 20’ Wood Top Bed,172,020 Miles, 25,950 Lb. GVWR1990 Chevrolet Model Kodiak SingleAxle Straight Truck; Vin#1GBJ7H1J4MJ104226, Cat. Diesel Engine,5-Speed Manual Transmission, 2-Speed Axle,24’ Steel Flat Bed, 254,394 Miles (NotRunning)

LIFT TRUCKS32,000 Lb. Hoist Model FRE16 SitDown Electric Lift Truck; s/n 21447, 6’Forks, 98” Lift, 72-Volt, Needs Battery (New1999)15,000 Lb. Caterpillar Model T150DLP Gas Cushion Tire Lift Truck; s/n5MB01354, 3-Stage Mast, 188” Lift Height,106” Mast Height, 60” Forks, Side Shift,5,542 Hours5,000 Lb. Yale Model GLC050 LP GasCushion Tire Lift Truck; s/n187V06267V, 3-Stage Mast, 194” Lift Height,84” Mast Height, 41” Forks, Side Shift,11,329 Hours5,250 Lb. Hyster Model S50E LP GasCushion Tire Lift Truck; 3-Stage Mast,187” Lift Height, 85” Mast Height, Side Shift5,000 Lb. Caterpillar Model T50D LPGas Cushion Tire Lift Truck; s/n8EB271, 3-Stage Mast, 188” Lift Height, 84”Mast Height, Side Shift, 42” Forks5,000 Lb. Clark Model C-500-45 LPGas Cushion Tire Lift Truck; 2-StageMast, 82” Mast Height, 36” Forks32,000 Lb. Hoist Model FRE16 Sit-Down Electric Lift Truck; s/n 21447, 6’Forks, 98” Lift, 72-Volt, Needs Battery4,450 Lb. Nissan ModelCWGP021255 Electric Lift Truck; s/n9E0536, 3-Stage Mast, 178” Lift Height, 82”Mast Height, 48-Volt3,500 Lb. Allis-Chalmers ModelACE35 Electric Lift Truck; 2-Stage Mast,86” Lift Height3,000 Lb. Allis-Chalmers ModelFTB30-24 LP Gas Cushion Tire LiftTruck3,500 Lb. Crown Model 35RRTTElectric Reach Truck; 210 Lift Height JLG Sizzor CM1732 Electric ScissorLift

(45) Tilt Frame, Horizontal & Vertical Band Saws

(20) Vertical Band Saws & (25) Cut-Off Saws

(7) Squaring Shears, Press Brakes & Fabricating Equipment

(10) Lift Trucks to 32,000 Lb. & Support Equipment

Large Inventory of Small Machinery

(30) Air Compressors to 60-HP


All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM 18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

AUCTIONEERS

Off I-670 On the Southwest side of John GlennColumbus International Airport, use GPS forbest results.

DIRECTIONS


SALE DATE:Wed., October 4th

STARTING AT 10:00AMINSPECTION:

Tuesday, October 3rd10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

INDUSTRIALMACHINERY CO.

OWNER RETIRING AFTER 80 YEARS INVENTORY LIQUIDATION OFMACHINE TOOL DEALER INCLUDING (500+) MACHINE TOOLS, CNC

MACHINERY, MILLS, LATHES, GRINDERS, DRILLS, SAWS, FABRICATINGEQUIPMENT, LIFT TRUCKS, LARGE SCRAP OPPORTUNITY

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:


500 N. Stanwood Rd. – Columbus, Ohio 43209Off I-670 near John Glenn International Airport

CNC EquipmentCNC EquipmentCNC Equipment (50) Band Saws(50) Band Saws(50) Band Saws

(35) Engine Lathes(35) Engine Lathes(35) Engine Lathes Shears & Press BrakesShears & Press BrakesShears & Press Brakes



500 N. Stanwood Rd.Columbus, Ohio 43209

Off I-670 near John Glenn International Airport


Cincinnati Industrial Auctioneers, Inc. –License No. 2566

Jeffrey L. Luggen – License No. 1250Joseph M. Luggen – License No. 4499


CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760


industrial machinery co. - secure … · tool dealer including (500+) machine tools, cnc machinery,...

Documents