industrial-commercial concrete floors december 4 - 5 2018 · luke sevcik and 25-time golden trowel...
TRANSCRIPT
Industrial-Commercial Concrete Floors December 4 - 5, 2018
Wacker Neuson will be offering an Industrial-Commercial Concrete
Floors course which includes your choice of taking the ACI
(American Concrete Institute) Flatwork Technician certification or
the ACI Specialty Commercial/Industrial Concrete Floor Technician
certification. The course will be conducted by Wacker Neuson’s certified flatwork finisher,
Luke Sevcik and 25-time Golden Trowel Award Winner, Bryan Birdwell. Birdwell has proven
his expertise in producing the flattest, most level concrete floors in the world. Bryan and Luke
will teach best practices and give contractors the technical skills they need to pass the
highest level industrial/commercial exams.
The course will take place over a two day period and will include classroom and hands-on
training. All participants will become fully prepared to complete the written and skills portion
of an official ACI certification test. Course materials include the ACI Certification Craftsman
Workbook CP-11 (08) or CP-10 (10) and Wacker Neuson’s Guide to Soil Compaction.
Registration will close November 20, 2018. At that time you will be shipped your ACI study materials. Course fee: $350 per person and an additional $195 if you would like to take one of the two ACI certification exams offered.
Contact Luke Sevcik at 262-227-1742 or by email at [email protected] if you have any questions.
Day 1: Tuesday, December 4, 20188:00 am - 4:30 pm Classroom with Bryan and Luke
• Pre-pour planning
• Concrete fundamentals
• Proper sub-grade preparation
• Mix designs (lower shrinkage, less curl)
• Hand tool applications
• Bull floats, check rods, and bump cutters
• F-number system, random traffic floors, and definedtraffic floors
• Machine patterns
• Trouble-shooting concrete floors
Day 2: Wednesday, December 5, 20188:00 am – 4:30 pm Hands-on training in placing and finishing of high tolerance F-number floors
• Verify mix design (slump, temp and air)
• Placing and finishing superflat and high tolerancefloors and practical examination
• Proper floating and troweling techniques
• Hand tool applications
• Testing methods using the F-number system
• Wacker Neuson plant tour
• ACI Technician Exams
Register at www.wackerneuson.com/training
Member of the American Concrete Institute