INDUSTRIAL AUTOMATION

• PROPOSALS • PLANNING• REVAMPING • MANUFACTURING • SOFTWARE • TESTING• START-UP • ASSISTANCE

Origo is a team of young but experienced electrical engineers specialized in industrial automation covering complete solutions, including all phases of project developing and commissioning.

We have put together theknow-how of our ProjectManagers and Softwarespecialists, who have beenworking in different industrialfields and accumulatedpractical experience in theprocess industry, permittingOrigo to comply with allindustrial automation requirements.

Our scope of supply covers state-of-the-art process and productioncomputers, AC or DC drive systems, HV/MV power supply, equipment for newinstallations as well as for revamps.

• Basic design and systemengineering

• Medium and low voltage electricaldistribution

• AC or DC motor and drives • Automation System

• Sequence control- Use of market PLC

• Drive control- DC drives- AC drives (for asynchronous and

synchronous motors)- DC and AC asynchronous and

synchronous motors- Roller table motors

• Master control- Coordination of plant areas- Use of market PLC

• Process control- PC, PLC, HMI- Recipe management - Tracking, scheduling, reporting- Alarm management- Maintenance management

• Installation, tests, commissioning and tuning up to performance tests.

The factory systems test is always performed. The completesystem, including PLCs, HMIs,pulpits and control desk, drives and motors are connected andtested together before delivery,thus reducing the finalcommissioning on site.

INDUSTRIAL AUTOMATION

• PROPOSALS • PLANNING• REVAMPING • MANUFACTURING • SOFTWARE • TESTING• START-UP • ASSISTANCE

Origo is a team of young but experienced electrical engineers specialized in industrial automation covering complete solutions, including all phases of project developing and commissioning.

We have put together theknow-how of our ProjectManagers and Softwarespecialists, who have beenworking in different industrialfields and accumulatedpractical experience in theprocess industry, permittingOrigo to comply with allindustrial automation requirements.

Our scope of supply covers state-of-the-art process and productioncomputers, AC or DC drive systems, HV/MV power supply, equipment for newinstallations as well as for revamps.

• Basic design and systemengineering

• Medium and low voltage electricaldistribution

• AC or DC motor and drives • Automation System

• Sequence control- Use of market PLC

• Drive control- DC drives- AC drives (for asynchronous and

synchronous motors)- DC and AC asynchronous and

synchronous motors- Roller table motors

• Master control- Coordination of plant areas- Use of market PLC

• Process control- PC, PLC, HMI- Recipe management - Tracking, scheduling, reporting- Alarm management- Maintenance management

• Installation, tests, commissioning and tuning up to performance tests.

The factory systems test is always performed. The completesystem, including PLCs, HMIs,pulpits and control desk, drives and motors are connected andtested together before delivery,thus reducing the finalcommissioning on site.

INDUSTRIAL AUTOMATION

• PROPOSALS • PLANNING• REVAMPING • MANUFACTURING • SOFTWARE • TESTING• START-UP • ASSISTANCE

Origo is a team of young but experienced electrical engineers specialized in industrial automation covering complete solutions, including all phases of project developing and commissioning.

We have put together theknow-how of our ProjectManagers and Softwarespecialists, who have beenworking in different industrialfields and accumulatedpractical experience in theprocess industry, permittingOrigo to comply with allindustrial automation requirements.

Our scope of supply covers state-of-the-art process and productioncomputers, AC or DC drive systems, HV/MV power supply, equipment for newinstallations as well as for revamps.

• Basic design and systemengineering

• Medium and low voltage electricaldistribution

• AC or DC motor and drives • Automation System

• Sequence control- Use of market PLC

• Drive control- DC drives- AC drives (for asynchronous and

synchronous motors)- DC and AC asynchronous and

synchronous motors- Roller table motors

• Master control- Coordination of plant areas- Use of market PLC

• Process control- PC, PLC, HMI- Recipe management - Tracking, scheduling, reporting- Alarm management- Maintenance management

• Installation, tests, commissioning and tuning up to performance tests.

The factory systems test is always performed. The completesystem, including PLCs, HMIs,pulpits and control desk, drives and motors are connected andtested together before delivery,thus reducing the finalcommissioning on site.

• PLC

• • •

• Electrical Drives • • •

• HMI • • • • •

•

IT Software application comes like an upgrade of production control with purpose of scheduling production in well-known format to production control contributing to paperless management. Application offers functionality:

• Production Planning System, • Production Data Acquisition, • Employee information System, • Reporting.

• Rolling and casting

• Hot Rolling for Bars and Profiles• Roughing and Finishing

Rolling Mills• Continuous Casting• Automatic gauge control

for rolling mills • Automatic flatness control

for rolling mills

• Processing Lines

• Annealing lines• Galvanizing lines• Grinding lines• Cutting and slitting lines • Inspection lines

• Material Handling

• Lifts and Cranes

• Cement and asphalt

• Auxiliaries of Power Plants

INDUSTRIAL AUTOMATION

• PROPOSALS • PLANNING• REVAMPING • MANUFACTURING • SOFTWARE • TESTING• START-UP • ASSISTANCE

Origo is a team of young but experienced electrical engineers specialized in industrial automation covering complete solutions, including all phases of project developing and commissioning.

We have put together theknow-how of our ProjectManagers and Softwarespecialists, who have beenworking in different industrialfields and accumulatedpractical experience in theprocess industry, permittingOrigo to comply with allindustrial automation requirements.

Our scope of supply covers state-of-the-art process and productioncomputers, AC or DC drive systems, HV/MV power supply, equipment for newinstallations as well as for revamps.

• Basic design and systemengineering

• Medium and low voltage electricaldistribution

• AC or DC motor and drives • Automation System

• Sequence control- Use of market PLC

• Drive control- DC drives- AC drives (for asynchronous and

synchronous motors)- DC and AC asynchronous and

synchronous motors- Roller table motors

• Master control- Coordination of plant areas- Use of market PLC

• Process control- PC, PLC, HMI- Recipe management - Tracking, scheduling, reporting- Alarm management- Maintenance management

• Installation, tests, commissioning and tuning up to performance tests.

The factory systems test is always performed. The completesystem, including PLCs, HMIs,pulpits and control desk, drives and motors are connected andtested together before delivery,thus reducing the finalcommissioning on site.

• PLC

• • •

• Electrical Drives • • •

• HMI • • • • •

•

IT Software application comes like an upgrade of production control with purpose of scheduling production in well-known format to production control contributing to paperless management. Application offers functionality:

• Production Planning System, • Production Data Acquisition, • Employee information System, • Reporting.

• Rolling and casting

• Hot Rolling for Bars and Profiles• Roughing and Finishing

Rolling Mills• Continuous Casting• Automatic gauge control

for rolling mills • Automatic flatness control

for rolling mills

• Processing Lines

• Annealing lines• Galvanizing lines• Grinding lines• Cutting and slitting lines • Inspection lines

• Material Handling

• Lifts and Cranes

• Cement and asphalt

• Auxiliaries of Power Plants

Our scope of supply covers state-of-the-art process and productioncomputers, AC or DC drive systems, HV/MV power supply, equipment for newinstallations as well as for revamps.

• Basic design and systemengineering

• Medium and low voltage electricaldistribution

• AC or DC motor and drives • Automation System

• Sequence control- Use of market PLC

• Drive control- DC drives- AC drives (for asynchronous and

synchronous motors)- DC and AC asynchronous and

synchronous motors- Roller table motors

• Master control- Coordination of plant areas- Use of market PLC

• Process control- PC, PLC, HMI- Recipe management - Tracking, scheduling, reporting- Alarm management- Maintenance management

• Installation, tests, commissioning and tuning up to performance tests.

The factory systems test is always performed. The completesystem, including PLCs, HMIs,pulpits and control desk, drives and motors are connected andtested together before delivery,thus reducing the finalcommissioning on site.

• PLC

• • •

• Electrical Drives • • •

• HMI • • • • •

•

IT Software application comes like an upgrade of production control with purpose of scheduling production in well-known format to production control contributing to paperless management. Application offers functionality:

• Production Planning System, • Production Data Acquisition, • Employee information System, • Reporting.

• Rolling and casting

• Hot Rolling for Bars and Profiles• Roughing and Finishing

Rolling Mills• Continuous Casting• Automatic gauge control

for rolling mills • Automatic flatness control

for rolling mills

• Processing Lines

• Annealing lines• Galvanizing lines• Grinding lines• Cutting and slitting lines • Inspection lines

• Material Handling

• Lifts and Cranes

• Cement and asphalt

• Auxiliaries of Power Plants

The Archimedean screw has been known since ancient times as a water lifting system and it is also currently used for the production of renewable energy.

Our contribution is to supply automation systems for traditional installations and together with the builder. We aim to develop an innovating solution: direct coupling of the hydraulic screw to a permanent magnet generator connected to an intelligent regenerating system.

• Reduce losses during energy conversion (greater efficiency) to the minimum

• Produce electric energy with optimized parameters (better quality of the energy in the power grid)

• Increase the production of clean energy (benefits for the environment)

Our scope of supply covers state-of-the-art process and productioncomputers, AC or DC drive systems, HV/MV power supply, equipment for newinstallations as well as for revamps.

• Basic design and systemengineering

• Medium and low voltage electricaldistribution

• AC or DC motor and drives • Automation System

• Sequence control- Use of market PLC

• Drive control- DC drives- AC drives (for asynchronous and

synchronous motors)- DC and AC asynchronous and

synchronous motors- Roller table motors

• Master control- Coordination of plant areas- Use of market PLC

• Process control- PC, PLC, HMI- Recipe management - Tracking, scheduling, reporting- Alarm management- Maintenance management

• Installation, tests, commissioning and tuning up to performance tests.

The factory systems test is always performed. The completesystem, including PLCs, HMIs,pulpits and control desk, drives and motors are connected andtested together before delivery,thus reducing the finalcommissioning on site.

• PLC

• • •

• Electrical Drives • • •

• HMI • • • • •

•

IT Software application comes like an upgrade of production control with purpose of scheduling production in well-known format to production control contributing to paperless management. Application offers functionality:

• Production Planning System, • Production Data Acquisition, • Employee information System, • Reporting.

• Rolling and casting

• Hot Rolling for Bars and Profiles• Roughing and Finishing

Rolling Mills• Continuous Casting• Automatic gauge control

for rolling mills • Automatic flatness control

for rolling mills

• Processing Lines

• Annealing lines• Galvanizing lines• Grinding lines• Cutting and slitting lines • Inspection lines

• Material Handling

• Lifts and Cranes

• Cement and asphalt

• Auxiliaries of Power Plants

The Archimedean screw has been known since ancient times as a water lifting system and it is also currently used for the production of renewable energy.

Our contribution is to supply automation systems for traditional installations and together with the builder. We aim to develop an innovating solution: direct coupling of the hydraulic screw to a permanent magnet generator connected to an intelligent regenerating system.

• Reduce losses during energy conversion (greater efficiency) to the minimum

• Produce electric energy with optimized parameters (better quality of the energy in the power grid)

• Increase the production of clean energy (benefits for the environment)

• PLC

• • •

• Electrical Drives • • •

• HMI • • • • •

•

IT Software application comes like an upgrade of production control with purpose of scheduling production in well-known format to production control contributing to paperless management. Application offers functionality:

• Production Planning System, • Production Data Acquisition, • Employee information System, • Reporting.

• Rolling and casting

• Hot Rolling for Bars and Profiles• Roughing and Finishing

Rolling Mills• Continuous Casting• Automatic gauge control

for rolling mills • Automatic flatness control

for rolling mills

• Processing Lines

• Annealing lines• Galvanizing lines• Grinding lines• Cutting and slitting lines • Inspection lines

• Material Handling

• Lifts and Cranes

• Cement and asphalt

• Auxiliaries of Power Plants

The Archimedean screw has been known since ancient times as a water lifting system and it is also currently used for the production of renewable energy.

Our contribution is to supply automation systems for traditional installations and together with the builder. We aim to develop an innovating solution: direct coupling of the hydraulic screw to a permanent magnet generator connected to an intelligent regenerating system.

• Reduce losses during energy conversion (greater efficiency) to the minimum

• Produce electric energy with optimized parameters (better quality of the energy in the power grid)

• Increase the production of clean energy (benefits for the environment)

• PLC

• • •

• Electrical Drives • • •

• HMI • • • • •

•

IT Software application comes like an upgrade of production control with purpose of scheduling production in well-known format to production control contributing to paperless management. Application offers functionality:

• Production Planning System, • Production Data Acquisition, • Employee information System, • Reporting.

• Rolling and casting

• Hot Rolling for Bars and Profiles• Roughing and Finishing

Rolling Mills• Continuous Casting• Automatic gauge control

for rolling mills • Automatic flatness control

for rolling mills

• Processing Lines

• Annealing lines• Galvanizing lines• Grinding lines• Cutting and slitting lines • Inspection lines

• Material Handling

• Lifts and Cranes

• Cement and asphalt

• Auxiliaries of Power Plants

The Archimedean screw has been known since ancient times as a water lifting system and it is also currently used for the production of renewable energy.

Our contribution is to supply automation systems for traditional installations and together with the builder. We aim to develop an innovating solution: direct coupling of the hydraulic screw to a permanent magnet generator connected to an intelligent regenerating system.

• Reduce losses during energy conversion (greater efficiency) to the minimum

• Produce electric energy with optimized parameters (better quality of the energy in the power grid)

• Increase the production of clean energy (benefits for the environment)