index of international standards

no.^74 5

Index of International Standards

Sophie J. Chumas, Editor

Engineering and Product Standards Division

Institute for Applied Technology

National Bureau of Standards

Washington, D.C. 20234

U.S. DEPARTMENT OF COMMERCE, Frederick B. Dent, Secretary

NATIONAL BUREAU OF STANDARDS, Richard W. Roberts, Director

Issued March 1974

Library of Congress Catalog Number: 73-600358

National Bureau of Standards Special Publication 390

Nat. Bur. Stand. (U.S.), Spec. Publ. 390, 222 pages (Mar. 1974)

CODEN: XNBSAV

U.S. GOVERNMENT PRINTING OFFICEWASHINGTON: 1974

For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402

(Order by SD Catalog No. C13.10:390). Price $5.60Stock Number 0303-01227

Foreword

The National Bureau of Standards, Standards Information Services (NBS-SIS) maintains a

reference collection of more than 200,000 engineering and related standards covering the activities

of more than 380 U.S. technical societies, professional organizations, and trade associations; U.S.

Federal and State governments; and the standards and specifications of the foreign national and

international standardizing bodies.

For some time now the National Bureau of Standards has recognized a need for a one source

listing of existing standards within the international community. Such a reference source, which

provides easy accessibility, is open to a wide range of uses. This Index contains the standards of

five international organizations, most of which are nongovernmental. However, future plans are to

expand the Index to include many other international governmental organizations such as the

Economic Commission for Europe (ECE), the Organization for Economic Cooperation and Devel-

opment (OECD), the World Health Organization (WHO), and the International Labor Organiza-tion (ILO).

It is particularly important to world trade that better communication be developed in the stand-

ards area. Serious efforts are underway among nations and among international organizations to

harmonize standards so as to provide a consistently competent body of technical specifications that

will enhance world trade and not impede its flow by creating non-tariff barriers.

W. E. ANDRUS, JR.Program Manager

Engineering and Information

Processing Standards

III

Contents

Page

Foreword Ill

1. Introduction 1

2. How to use the KWIC Index 12.1. Index Entries 1

2.2. Reading the KWIC Index 23. List of Organizational Names and Addresses 24. Availability of Standards 2

5. Stop List 5

6. KWIC Index 9

V


Sophie J. Chumas

This computer-produced Index, based on the Key-Word-In-Context (KWIC) system, con-tains over 2,700 standard titles of the International Organization for Standardization (ISO), theInternational Electrotechnical Commission (IEC), the International Commission on Rules forthe Approval of Electrical Equipment (CEE), the International Special Committee on RadioInterference (CISPR), and the International Organization of Legal Metrology (OIML).

Key Words: Analyses; International Commission on Rules for the Approval of Electrical Equip-ment; International Electrotechnical Commission; International Organization for Standardization;International Organization of Legal Metrology; International Special Committee on RadioInterference; recommendations; specifications; standards; test methods.

1. Introduction

This Index of international standards, recommen-dations, test methods, analyses, and specifications,contains over 2,700 titles. It is a computer-produced

Index based on the Key-Word-In-Context (KWIC)system. The standards-writing organizations repre-sented are: the International Organization for Stand-

ardization (ISO), the International Electrotechnical

Commission (IEC), the International Commission onRules for the Approval of Electrical Equipment(CEE), the International Special Committee on RadioInterference (CISPR), and the International Orga-nization of Legal Metrology (OIML). The standardsof these international organizations have worldwideapplication and contribute to world progress.

The purpose of this Index is to identify existinginternational standards for a particular product, the

characteristics or parts of products, the safety or

performance of products, any related materials, vo-

cabularies, symbols, test methods, analyses, and otheraspects of standards. Criteria for inclusion are that

an organization be international in scope and thatit have standards published in the English language.

Many titles were editorially changed either to in-clude another descriptive term (key word) for bettersubject identification or to prevent repetitious titles

in the text of the Index. However, none of the titleswere edited to cause any change in their meaning.Since standards titles as found in this Index are notalways exact, for ordering purposes, the designation

number should accompany a request. Bibliographicinformation is available through the Standards Infor-mation Services (NBS-SIS) of the National Bureauof Standards, the American National Standards Insti-tute (ANSI), or the issuing organization. Orderinginformation for the indexed standards may be foundunder Section 5.

The following indexing guidelines were establishedfor the standards in this Index:

a. Supplements to standards were indexed onlywhen they carried separate titles in addition tothe main title.

b. Amendments to standards were not indexed.

c. Date of the original document was used.

d. When the title contained a word for which

there are two spellings, both versions were

usually included, e.g., aluminum, aluminium.This source of reference, which will be updated

periodically, will hopefully be of assistance to users

concerned with world trade, metrication, and certifi-

cation; to developing countries; to U.S. and foreign

standardizes; to foreign national, regional, interna-

tional, and U.S. standards bodies; to manufacturers,engineers, builders and architects; to environmental-ists; to consumer-oriented organizations; and to stu-

dents of the standardization discipline.

2. How to Use the KWIC Index

2.1. Index Entries

An index entry contains four items of information.

Sample Entry (Exact title of standard)

(1) Std. for Rolling Bearings: Tolerances; Metric

Series Chamfer Dimension Limits and MaximumShaft and Housing Fillet Radius

(2) (1972)

(3) ISO

(4) 582

The first item given is the title of the standard, speci-

fication, or recommendation. Generally, the key words

found in the title are sufficient to identify the product

or article covered; however, in some instances addi-

tional descriptive terms have been added to the title

to aid in identifying the contents. Over 600 words,

which are meaningless for searching purposes, do not

appear as key words. Examples are: "and," "for,"

"general," "method," and "practice." A list of thesewords appears in Section 5, "Stop List." The second

item denotes the year of publication. The third item

is the issuing organization, identified by an acronym

consisting of five letters or less. The fourth item is the

standard number assigned by the organization. Itemsthree and four make up the standard's designationnumber. This alphanumeric designation is always

found in a column next to the right-hand margin of

the Index.

VII

2.2. Reading the KWIC Index

The title of each standard can be found under allthe significant key words which it contains. Thesekey words are arranged alphabetically down thecenter of each page together with their surroundingcontext. Each such permuted title is assigned onlyone line per key word entry in the Index; therefore,titles longer than one line have been cut by the com-puter. This truncation is indicated by a virgule (/)at the point where the title was cut.

Sample Entry (The same title in Section 2.1., as itappears in KWIC form, edited andtruncated) :

imits and Maximum Shaft and Housing Fil/ Std.for Rolling Bearings: Tolerances; Metric Series

Chamfer Dimension L ISO 582

Occasionally both ends of a title will be truncated.

When this condition occurs, the virgule will beomitted. Missing portions of a title can be found bylocating in the Index one or more of the title's otherkey words.An entry line is read from left to right, beginning

after the longest blank space in the line and endingat the designation number. If the longest blank spaceis not at the beginning of the line, the entry will becontinued at the left hand margin of the same line.

3. List of Organizational Namesand Addresses

International Commission on Rules for the Approvalof Electrical Equipment (CEE)

310 UtrechtsewegArnhem, Netherlands

International Electrotechnical Commission (IEC)1, rue de Varembe1211 Geneve 20Switzerland/Suisse

International Organization of Legal Metrology(OIML)

11 rue Turgot75-Paris 9e, France

International Organization for Standardization (ISO)

1, rue de Varembe1211 Geneve 20Switzerland/Suisse

International Special Committee on Radio Interference(CISPR)

1, rue de Varembe1211 Geneve 20Switzerland/Suisse

Secretariat: British Standards Institution (BSI)2 Park StreetLondon W1Y 4AAEngland

4. Availability of Standards

Standards indexed in this publication are availablein the United States from the:

American National Standards Institute (ANSI)1430 BroadwayNew York, New York 10018

ANSI, as a National ISO member body, serves as thesole sales agent in the United States for foreign andinternational standards.

The following National standardizing bodies serve asnational representatives for one another. Each actswithin its own country as sole sales agent and infor-mation center for the standards of the other National

standardizing bodies.

Albania: STASH, Bureau de Standardisation aupresde la Commission du Plan d'Etat de la RepubliquePopulaire, D'Albania, Tirana

Algeria: Office National de la Propriete Industrielle,

5, rue Abou Hamou Moussa, B.P. 1021

Argentina: IRAM, Instituto Argentino de Materiales,Chile 1192, Buenos Aires

Australia: SAA, AS, Standards Association of Aus-tralia, 80-86 Arthur Street, North Sidney NSW 2060

Austria: ON, ONORM, Oesterreichisches Normungs-institut Leopoldsgasse 4A-1021 Wien 2

Barbados, W.I.: Barbados National Standards Insti-tution, Old Bay Street Boys' School, Bay Street, StMichael, Barbados W.I.

Belgium: IBN, Institut Beige de Normalisation, 29

Avenue de la Brabanconne B-1040 Bruxelles 4

Brazil: ABNT;NB,EB, Associacao Brasileira deNormas Tecnicas, Caixa Postal 1680, Rio de Janeiro

Bulgaria: KKCM, Comite de la Qualite de la Nor-malisation et de la Metrologie, 21, rue 6 Septembre

Sofia

Burma: UBARI, UBS, Union of Burma Applied Re-search Institute, Junction of Kaba Aye Pagoda-Kanbe Roads, Rangoon

Canada: CSA, Canadian Standards Association, 178Rexdale Blvd, Rexdale 603 Ontario

VI IB

Ceylon: BCS, Bureau of Ceylon Standards, 53 Dhar-mapala Mawatha, Colombo 3

Chile: INDITECNOR, Institute Nacional de Investi-gaciones Tecnologias y Normalizacion, Plaza Bulnes

1302, OF 62, Casilla de correo 995, Santiago

China: CNS, National Bureau of Standards, Ministryof Economic Affairs, 5th Floor, Hsin Kuang Life In-surance Building, Bldg 61-1 Sung-Chiang Rd Taipei,Taiwan, 104 Republic of China

Colombia: ICONTEC, Institute Colombiano de Nor-mas Tecnicas, Apartado Aereo, 14237 Bogota D.E.

Costa Rica: Instituto Centroamericano de Investiga-ciones y Tecnologia Industrial, 4a Calle y Avenidala Reforma, Zona 10, Guatemala City, Guatemala

Cyprus: The Ministry of Commerce and Industry ofthe Republic of Cyprus, Nicosia

Czechoslovakia: CSN, Urad pro normalisaci a mereni,Vaclavske namesti c. 19, 11347 praha 1, Nove Mesto

Denmark: DS, Dansk Standardiseringsraad, Aure-hojvej 12, DK-2900, Hellerup

Egypt: EOS, Arab Republic of Egypt, EgyptianOrganization for Standardization, 2 Latin AmericaStreet, Garden City, Cairo

Ethiopia: ESI, Ethiopian Standards Institution, P.O.Box 2310, Addis Ababa

El Salvador: Instituto Centroamericano de Investiga-ciones y Technologia Industrial, 4a Calle y Avenidala Reforma, Zona 10, Guatemala City, Guatemala

Finland: SFS, Suomen Standardisoimisliitto Box 205SF00121 Helsinki 12

France: AFNOR, NF, Association Francaise de Nor-malisation, Tour Europe, Cedex 7, 92080 Paris-LaDefense

Germany: DNA, DIN, Deutscher Normenausschus,4-7 Burggrafenstrasse, 1 Berlin 30

Ghana: ISIG, National Standards Board, P.O. BoxM245 Accra

Greece: NHS, Ministry of National Economy, Indus-try Sector, Standardization Division, 13 XerofonStr., Athens 118

Guatemala: ICAITI, Instituto Centroamericano deInvestigaciones y Tecnologia Industrial, 4a, Calle yAvenida la Reforma, Zona 10, Apartado Postal 1552

Honduras: Instituto Centroamericano de Investiga-ciones y Tecnologia Industrial, 4a Calle y Avenidala Reforma, Zona 10, Guatemala City, Guatemala

Hong Kong: Federation of Hong Kong Industries,Eldex Industrial Bldg, 21 Ma Tau Wei Road, Unit A,Munghom Kowloon

Hungary: MSZH Magyar Szabvanyugyi HivatalPostafiok 24 1450 Budapest 9

Iceland: Industrial Development Institute, Skipholt

37, Reykjavik

India: ISI, IS, Indian Standards Institution, "ManakBhavan," 9 Bahadur Shah Zafer Merg, New Delhi 1

Indonesia: DNI, NI, Jajasan "Dana NormalisasiIndonesia," Bjalan Braga 38, Bandung

Iran: ISIRI, Institute of Standards and Industrial

Research of Iran, Ministry of Economy. P.O. Box2937, Teheran

Iraq: IOS, Iraqi Organization for Standards Plan-

ning Board, P.O. Box 11185, Baghdad

Ireland: IIRS, I.S., Institute for Industrial Research

and Standards, Glasnevin House, Ballymun Road,Dublin-9

Israel: SII, Standards Institution of Israel, 42 Uni-

versity Street, Tel Aviv

Italy: UNI, Ente Nazionale Italiano de Unificazione,Piazza Armando Diaz 2, 120123 Milano

Japan: JISC, JIS, Japanese Industrial Standards

Committee, Agency of Ind. Science and Techonolgy,Ministry of International Trade and Industry, 3-1

Kasumigaseki Chiyoda-Ku, Tokyo

Kenya: Ministry of Works, P.O. Box 30043, Nairobi,Kenya

Korea: KBS, KS, Korean Bureau of Standards, Min-istry of Commerce & Industry, P.O. Box Kwangh-wamoon 282, Seoul

Kuwait: KSS, Ministry of Commerce and Industry,P.O. Box 2944

Lebanon: LIBNOR, Lebanese Standards Institution,P.O. Box 2806, Beirut

Libya: Standards & Specifications Section, Depart-ment of Industrial Organization, Ministry of Industry,Tripoli

Madagascar: Ministere des mines, de l'lndustrie, duCommerce et du Ravitaillement, Service du Condi-tionnement, B.P. 1316 Tananarive

Malaysia: SIM, Standards Institution of Malaysia,

5 Jalan Semantan, P.O. Box 544, Kuala Lumpur

Malta: Department of Industry, Standards Labora-

tory, Industrial Estate, Marsa-Malta

Mexico: DGN, Direccion General de Normas, Av.Cuauhtemac No. 80, Mexico 7, D.F.

Morocco: SNIMA, Service de Normalisation Indus-trielle Marocaine, Direction de l'lndustrie, Sous-

Secretaire d'Etat a l'lndustrie et aux Mines, Rabat

Netherlands: NNI, Nederlands Normalisatie-instituut,Polakweg, 5 Rijswijk (ZH)2106

New Zealand: SANZ, Standards Association of NewZealand, Private Bag, Wellington

Nicaragua: Instituto Centroamericano de Investiga-

ciones y Techologia Industrial, 4a Calle y Avanidala Reforma, Zona 10, Guatemala City, Guatemala

Nigeria: Federal Ministry of Industries, Nigerian

Standards Organization, 11 Kofo Abayomi Road,Victoria Island, Lagos, Nigeria

Norway: NSF, NS, Norges Standardiseringsforbund,Haakon VII's gt. 2, Oslo 1

Pakistan: PSI, Pakistan Standards Institution, 39Garden Road, Saddar, Karachi 3

Panama: Instituto Centroamericano de Investiga-ciones y Tecnologia Industrial, 4a Calle y Avenida laReforma, Zona 10, Guatemala City, Guatemala

Paraguay: INTECNOR, Instituto Nacional de Tec-nologia y Normalizacion, Brasil y Jose Berges,

Annuncion

Peru: ITINTEC, Instituto de Investigacion Tecnolo-gica Industrial y de Normas Tecnicas, Apartado No.145, Av. Republica de Chile 698, Lima

Philippine Islands: Bureau of Standards of thePhilippines, Plaza Sta. Cruz, P.O. Box 3719 Manila

Poland: PKNIM, Polski Komitet Normalizacji i MiarUI. Electoraina 2, Warszawa 51

Portugal: IGPAI, NP, Reparticao de Normalizaco,Avenida de Berna 1, Lisbon

Republic of South Africa: SABS, South African Bu-reau of Standards, Private Bag 191, Pretoria

Rhodesia: Standards Association of Central Africa,

Coventry Road Workington, P.O. Box 2259, Salisbury4

Romania: IRS; Institutul Roman de Standardizare,Casuta Postala 10 Bucarest 1

Saudi Arabia: The Ministry of Commerce and Indus-try, Department of Metrology and Standards, Riyadh

Singapore: SIRU, Singapore Institute of Standardsand Industrial Research, 179 River Valley Road, P.O.Box 2611, Singapore

Spain: IRANOR, Instituto Nacional de Racionaliza-cion y Normalizacion, Serrano 150 Madrid 6

Sudan: Sudanese Organization for Standard Specifica-tions, Ministry of Industry and Mining, P.O. Box2184, Khartoum, Sudan

Sweden: SIS, Sveriges Standardiseringskommission,Box 3295 S-103 66 Stockholm 3

Switzerland: SNV, Association Suisse de Normalisa-tion, 4, Kirchenweg, 8032 Zurich

Syria: Industrial Testing and Research Centre, P.O.

Box 845, Damascus

Thailand: CTNNS, Centre for Thai National StandardSpecifications, Applied Scientific Research Corpora-

tion of Thailand, 196 Phahonythin Road, Bangkhen,

Bangkok

Tunisia: Ministere de l'Economie Nationale, 195 rue

de la Kasbah Tunis

Turkey: TSE, TS, Turk Standardiari Enstitusu,Necatibey Caddesi 112, Bakanliklar, Ankara

United Kingdom: BSI, BS, British Standards Institu-tion, 2 Park Street, London W.l A 2BS, England

Uruguay: UNIT, Instituto Uruguayo de Normas Tec-nicas, Agraciada 1464, Piso 9, Montevideo

U.S.S.R.: GOST, Gosudarstvennyj Komitet StandartovSoveta Ministrov S.S.S.R., Leninsky Prospekt 9b,

Moskva M-49

Venezuela: COVENIN, Comision Venezolana deNormas Industrials, Piso 6 Torre Sur, C.S.B. OF653, Caracas 101

Yugoslavia: JZS, JUS, Jugoslavenski zavod zaStandardizaciju, Cara Urosa ul 54, Post pregr 933,11001 Beograd

Zambia: Zambia Standards Association, P.O. BoxR.W. 259, Lusaka, Zambia

X

5. Stop List

ABILITYi A.U1U1 A X BACKWARDLYl J . X VJ1V TV i A. A IL/ A' X CONSISTING EVACUATE1 J V j A V.J * ' XXX AJABOVE BASED CONTENT EVIDENCEABSENCE

T 1 ll /*~"V TV 1~1BEFORE /~ty. TVTmTl TV Tm/~iCONTENTS riv A It AT T TV T l

-'EXAMINE

ACCEPTINGt\ti T T T TV T TVBEHIND /^l/\\TT rr^ATmT/MVT A X X xrCONVENTIONALLY x-i xrAT T~~* T~v TXTAEXCEEDING

ACCOMMODATE TV Tl T IVTABEING OAT TT\T Tl TvCOUPLED T~> AT" AT* TvrnEXCEPT

BELOW COVERAGE EXCLUDINGJ iJ v. Vjaj w Ay in v yACCORDING BENEATH CRE EXISTENTACCUMULATE BETWEEN CRES

T1TrT\nHTT\ A T\T T 1EXPENDABLEACQUIRED

TiT T'TVTTVTTVBLENDED cs y> x t p,t-| j-\ x y-> ivTAT'EXPERIENCEACROSS

TV /~V TV T V"~l TVBODIED CUBIC T -i "Vr X^T~i XX X T~\ TV T /~> X^l i~lEXPERIENCES

ATT-TV Vj 1 BOTH DEFINED EXPLANATIONAC/DC BROKEN DEFINITE EXPOSEDADD BTU

rvrAn ipi x~iDEGREE EXTANTADDENDA BURNED

T\ri/^ tv T^ IT*1DEGREES T~ixrmp TV T TTV T~* TVEXTENDEDADJACENT BUT DELAYED

l~l X TmT' TV T Tv T TV T /~^\EXTENDING

ADTTISTf\ J_/J UJ 1 CANNOT DEPLETED EXTERNALLYAFFECTING CAPABILITIES DERIVED EXTRAAFFORD t~~* A Ti A nTT

imT.T'CAPABILITY ULhlGNAIt, T> V' T^TT) A rrn A T>T pLXIRACIABLL

AFTERA TTCT TTVCAUSED ritTC T/

1 TVT A TM7 TAUhblGINAlLU LX1KAC1LUAFTER-FINISHED CENT nrcTD A DT T? r

,VT,r> 4 ArTTTVT

A

LXIRAC11NG

AGAINST1 X \JJ. Ill 1 t*J x CENTIGRADE DESIREDA ' 1 j k^ XXV AJ 1 EXTREMEAGENCIES CENTIMETER DETAILED FABRICATEDALL CENTIMETERS

x*vn rrMn X^ H M X TV TDETERMINETi A AT'TVt ACLD

ALONG-wi Tm XX A X T X TCENTRALLY DETERMINING TAT crr ALhL

ALPHA CENTRE-y w fiTTl-' TV T^ TV TfTlDIFFERENT T* A CTT A.T T7 Tir AblLINLU

ALSO CENTRES DIFFICULT\ " XXX X V ' V mi X FEDALUMINIUM CENT DILUTE FEEBLYAMOUNT CERTAIN X"v X X"* T~< VImT X TDIRECTLY h 1BRLAND/OR CHANGED X-k X /IT TriO T TVTDISCUSSION rmnrcr 1BRESANNEX CHIEFLY X~* Trip TH f TT A TVDISSIMILAR r If I

Y

ANSWERi A J. ' T T Ai A. 1. CHOICE' v A. X V_7 X \ j 11 j DIVIDED1 J X T X Ay J I J

'

FINERANSWER-BACK CHOOSING DUE FLATWISEANY CLASS x-v X T X^X T A ri > T

1

DUPLICATET' A. T>FOR

APPENDICES CLASSES DURINGTTA TI T/"T1 T\FORKED

APPENDIX CLEANED DVA FORMERLY

APPLICABLE COINCIDENTVJW 11 1 VJ X X-' J_JX 1 X EASILY_1 J 1 X LJ X AJ X FORTYAPPLIED COLOUR EDGED FORWARDAPPLYING COLOURS X"1

1V /~1 X~l XTTT T riEDGEWISE T*/~T TT*FOURA tvtvtv a TnnAPPRAISE

yy m * XX TUT 1 T vCOMBINED EFFECT T'/"* T T Tl TT TFOURTHA TVTVTV VV T7" T1 f A mx~*APPROXIMATE COMMITTEE T~~l nT-ixi /^mx X TT

1 TV T11 fEFFECTIVENESS T^T TT T

"\7"FULLY

APPROXIMATELY- A A X XI v_y . Vllili X X A j A J X COMMONLY EFFECTS11 A X AJ\J X GALAPPROXIMATION COMPARABLE EIGHTHS GALLONARE COMPARING EIGHTS A PATTn A TGENERALA T> AT T TV T TvAROUND COMPARISON w\ xmT t nEITHER ay tv tt t at TiT TD Tj/TiC T7GENERAL-PUKPUbLA O T /"l. TV TTA *" T"1 TVTmASSIGNMENT COMPLEMENT T~> TV 7 rr\X^ X"\ T TVTENTERING A T* TV TT

1 Tl A rriTTYGENERATED

ASSIGNMENTS COMPLIANCE ENTRY GIVENASSOCIATED COMPOUNDED EQUIPPED GIVINGASSURE CONFORMING EQUIVALENT GRAMAVAILABLE CONJUNCTION ESTABLISHMENT GRAMMEAWAY CONSIDERED ESTABLISHMENTS GREAT

XI

PRF A TFRl^rvLAlLn. JxrlZ, IV A TT TR 1?INA 1 UrvL POTTIVIT^QtvlLUL. l LLL 1VF A RiNL/\rv PR A PTr rvAL 1

.

GROUPS KILOCYCLES NEEDED PRACTICEGROWTH KILOHERTZ NOS. PRACTICESHALF KILOVOLT NOT PRECAUTIONSi ix x_i y i x \ j i x vy x l L

L

t TPFivcFr*L1LL1N5LD UrvDLrv PRPiPTTRr JtvUr LrvIMPERVIOUS LIKE ORDERS PROPERLYIMPORTANCE LOCATED ORGANIZED PROPOSALIMPROVED LOWER1 iV/ TV J-JJ.X ORIGINV_7 111 V>F 111 PROPOSALSX X *L 1 V_/ k J x XX-J >w/

TMPRPiVFMFTSJTlivlr t\\J V L1V1HN 1 MAUL PiTWFRU 1 rlLrv PRPiPPiSFTitmpr pivtivtpllVIr rvU V llNlj 1\/T A FF PiTTMPFUUiNLL PRAVTriFr rvU V 1LLIN MATTERS OUT PROVIDEDINCH MAXIMUM OVER PSIINCLUDE MAY OWN PULL

MFFiTTTMIV1LU 1 U 1V1 HMf/NlTR^UWli rjiAij PTIRPO^F

111 VjIj U UjJ MFP AFTFRT7 PAPTFTr PTTRPfiSFSINCLUDING METH. PAR QUADDEDINCLUSION METHOD PART QUADRUPLEINCLUSIONS METHODS1*1 1 1 111 \ Js \r > PARTICULARi x x i v i x v i \ -i

1 1 x x x QUARTERING

T1VPT TKTVF111 v_jJ_jUjIVL IVlCj V PARTTPTTT ART Y1 AVIV 1 IV. 1 L/AJaLj ITIMPPiRPPiR 4 TFllNLUrvr UrvA 1

L

P A STrno 1 PiTTTPT^T YINCREASE MIL PAYABLE QUOTATIONINDIVIDUAL MILLED PENALTIES REACHINFLUENCEXXIX MJ v. X_J X 1 V 1 J MILLIAMPERE1T11 1 ' 1 ' 1 1 1 1 1 ' X I | ' PER REBOUNDX V *' -t* X 1 MJ

TMT-TTRTTFnllNrllrJl 1 rLilJ 1V/TTT T TTV/TTTTFRMILLIML 1 LK PTTR PI? TVTTnr LrvLLl V LD RFRTTTTFnrvLJDU 1 1 LJJTIVIVFRUN INLit MILS PFRPFMTr LtxLLlN 1 RFPFTV A RT FtvLLLl V /ADLiIjINSIDE MINIMIZATION PERCENTAGE RECEIVEINSPECT MINIMIZE PERIOD RECEIVEDINTERIMX 1 1 X LJ1 1 1 111 MINIMIZINGITxXx! XlTl If j 1 1 i V7 PERMANENTLY1 1 i lllTli 11 1 J f X 1 X 11 J 1 RECOMMENDEDX V_ J J V> > ' 1I11T1 J i X 1 -1

' -1

I IS

TTVTR T1VTCTP A T T VUN lrvllNolLALL 1 IV111.N11V1 U1V1 PFRMTTr Lrvivll 1 RFPPfMMFlVnTNPrvLLVJlVllVTLlN UllNVjTNVPiT VT1VPUN V (JL V UNLr 1V1UDL PFRTA IMIMPr Ln. 1 A11N 11NL RFP ARHIVIlAjrV IVUTIMUN

.

MPinFR A TT7lVlUDLrvA 1 L PT T7 A QT TRFrLLA5 UrvL RFP ARFkTNPITS MORE PLUS RELATEDKGF MOST POUND RELATING

XII

KLLAl 1UIN c i >t,'c 1 1/

1

a rri/^\SrLLlr 1LA11UIN T TCTTDT7TI/T A TTVTTTVT^KLMA1JMING C 1 7 IT/M I," I 1 ' A rPT/"71\JCSrELlr 1LA 1 10INS ry-7 T 7.

1 1 1

7

T TCT7FVUSEDREMOTELY SPECIFIED THEREAFTER USINGREMOVABILITY SPEC. THEREFROM USUALRFPFATFD SPFNTi*JX X-jl 7 X THFRFTNX XXXJXlXLiXll VAPOURV I 1 V 1 1 11

;T A l\Tr3 1 A1NU 1 HLSL \T A T?T A TTflTVTVAK1A 1 1U1>KLQUlnL M A1MJAKL) T I T T 1 7 171 H1KD VAK1A 1 lUINSREQUIRED STANDARDIZE THIS VARIOUSRESIST STANDARDS THOSE VERSARFSPFCT STATF. 1 1 n x 1 j THRFF VFRYV XlilV 1

KLsrUlNblijlLl 1 ILS CrFT7'D'r>Tr, T\MLrrLD t*ttt> r\i /mi1HKOUGH 7 j r/ITV1LL

nhbrUlNMblLl 1 i CTAD VSI UK i '1-7 777 x T1HKU tvt a TTWA 1 1RESTRAINED STRENGTHENED TIGHTLY WAYRESULTANT STUDY TOGETHER WHENRFSTIT TS STYT F TONS WHFRFVV X XXJXXXTj

KL I AlINLlJ CTVI T7 C5 1 I LL5 'TVV

1

1 A T1U1 AL \V I I 1 / " T

I

WxilLliKrM C T T L> T 17CHPT? F7 rIV~7 'I1 A T T "V"1U1ALL

i

WHUSALE SUCH TOWARD WHOLESALESAME SUFFICIENTLY TRIPLE WHO'SSELF STTCOFSTFD TWO1 VV v./ WITHW X X X X

C17DAD A TV CTT1T A DTT TTVbUllAblLll i 1 irt Wll HI INSL VLIN 1 I CT TTT A DT IT5U1

1

AdLL TVTHTC1 YrLb Wll HUU 1SEVERAL SUPPLEMENT TYPICAL WORKEDSHOWN SUPPLIED UNATTENDED ZEROSIMII AR TAKFN TINCFRTATNTY

CTMPT VolINLrL Y T A IZTIVF/^'1 AisJJNL- T TIVTMPDCM ATTSMALL 1LLH T TV 171/ 1) CT A TVTrvTTVT/"*UINDLKS 1 AJNDIINL-CA/f ATT FT}51V1ALLLK TIT 1\TTW 1\TC T ITC1L1N DLlNLlLb T TTNJTT'SPECIALLY TENTATIVE UNWANTEDSPECIFIC THAN UPON

XIII


(1970)

(1969)

f Dimensions- Profiles (1966)1967)

72)

1972)

Rec. for

969/ Rec. for Measurement of the Winding Resistance of anRec. for

Rec. for Lightning Arresters: Nonlinear Resistor Type forRec. for Low Voltage Motor Starters: Direct on Line,

Rec. for Low Voltage Motor Starters: Reduced,Std. for Documentation-International Code for the

(1968) Rec. for

ences (1968) Rec. forRec. forRec. for

Rec. for BondedRec. for BondedRec. for Bonded

Std. for

Rec. for CylindricalStd. for Truncated Cone

rily Used for the Production of Aluminum: Determination offor Fibre (Fiber) Building Boards: Determination of Water

Rec. for Measurement ofe Production of Aluminium-Determination of Zinc-Atomicn of Aluminium-Determination of Calcium Content-Atomic

g (1970) Rec. for Plastics-Determination of LightRec. for Determination of the Water

Std. for Leather: Determination of

Rec. for Plastics-Determination of WaterRec. for Plastics-Determination of Boiling Water

nium (Aluminum) and Its Alloys-Estimation of the Loss ofRec. for

s Coated with Rubber or Plastics (1970) Rec. forRec. for Vulcanized Rubbers -

Std. for Flexible Cellular Materials -

66, 610 and 6 (1969) Rec. for Plastics -

e / Rec. for a Meth. for the Evaluation of the Results ofrocedures for Electronic Components and Equipment: Test D:

Rec. for an Appraisal of the Problems ofocedures for Electronic Components and Equipment: Test Ga:

Rec. for Rolling Bearings-For Railway Axle Boxes:Spec./S and

Rec. for International Code for the FieldRec. for International Code for Model

Rec. for International Code for the FieldRec. for Steam Turbines: Rules for

Std. for Gas Turbinesrt Link Chain for Lifting Purposes-General Conditions of

Rec. for Textile Machinery andRec. for Textile Machinery andStd. for Textile Machinery andStd. for Textile Machinery andRec. for Textile Machinery andStd. for Textile Machinery andStd. for Textile Machinery andRec. for Textile Machinery andRec. for Textile Machinery andRec. for Textile Machinery and

inning-Dimensions (1971/Usable Width (1971)

Doubling Frames for C /de (Left or Right) (1960)ubling Frames for C And/ling Frames (1972)s (1971)

of Side (Left or Right) /(1971)

raphical Symbols for Hydraulic and Pneumatic Equipment andfor Indicating Electrical Measuring Instruments and Their

Rec. for Impulse Tests on Cables and Theirirect Recording Electrical Measuring Instruments and Theirilling Machine Arbors with 7/24 Tapers and Milling Machine

Rec. for Rolling Bearings:Rec. Graphical Symbols: Telecommunication Lines and

,Heating An/ Rec. for Electrical Installations in Ships:

for Tests on Oil Filled and Gas Pressure Cables and Theirfor Tests on Oil Filled and Gas Pressure Cables and Theirfor Tests on Oil Filled and Gas Pressure Cables and Their

indirect Reading Capacitor Type Pocket Exposure Meters andRec. for Camera

Electrical Installations in Ships: Accessories, Lighting,

aphical Symbols: Machines, Transformers, Primary Cells andaphical Symbols: Machines, Transformers, Primary Cells andaphical Symbols: Machines, Transformers, Primary Cells and

cal Weights from 1 Gramme (Gram) to 10 Kilogrammes (Medium. for Rectangular Weights from 5 to 50 Kilogrammes (Medium

ditions for General Purpose Parallel Lathes-Test, of theheight, with Horizontal or Vertical SpindleTest, of theixed Height with Horizontal or Vertical SpindleTest, of

Grinding Wheel Spindle and Reciprocating Table-Test, ofGrinding Whtcl Spindle and Reciprocating Table-Test, of

Determination of Sodium -Gravimetric Meth. Using UranylPlastics-Determination of Light Absorption of Cellulose

ation of Viscosity Number and Viscosity Ratio of Cellulose0) Rec. for Plastics-Determination of Vinyl

nation of the Moisture Content of Nonplasticized Celluloseplastics-Determination of Ash of Unplasticized Cellulose

a.c. Electric Fans and Regulators (1972)a.c. Machine During Operation at Alternative Voltage (1a.c. Motor Capacitors (1967)a.c. Systems (1970)a.c. (1971)

a.c: Star Delta (1970)Abbreviation of Titles of Periodicals (1972)Abbreviations of Generic Names in Titles of PeriodicalsAbbreviations of Typical Words in Bibliographical ReferAbbreviations (Symbols) for Plastics (1969)Abrasive Belts-Designation- Dimensions-TolerancesAbrasive ProductsGrinding Wheel Dimensions Part 2Abrasive Products General Features Designation Ranges OAbrasive Products: Grinding Wheel Dimensions (Part 1) (Abrasive Sheets and Discs Dimensions (1972)Abrasive Sleeves: Designation, Dimension, Tolerance (19Abrasive Sleeves: Designation, Dimensions, Tolerances (Absolute Density; Pyknometer Meth. (1968) /Oxide PrimaAbsorption and of Swelling in Thickness After ImmersionAbsorption Coefficients in a Reverberation Room (1963)Absorption Meth. (1971) /M Oxide Primarily Used for ThAbsorption Meth. (1971) /Marily Used for the ProductioAbsorption of Cellulose Acetate Before and After HeatinAbsorption of Paper or Board (Cobb Meth.) (1967)Absorption of Water (1972)Absorption (1958)Absorption (1959)Absorptive Power by Colorant Drop Test with Prior AcidAbstracts and Synopses (1961)Accelerated Ageing and Simulated Service Test of FabricAccelerated Ageing or Heat Resistance Tests (1971)Accelerated Ageing Tests (1972)Accelerated Conditioning of Test Specimens of PolyamideAccelerated Corrosion Tests on Coatings Other Than ThosAccelerated Damp Heat (1960) /Ic Environmental Test. PAccelerated Test, for Atmospheric Corrosion (1971)Acceleration, Steady State (1968) /Ironmental Test. PrAcceptance Inspection (1970)Acceptance of New Sulphur Hexafluoride (1971)Acceptance Tests of Hydraulic Turbines (1963)Acceptance Tests of Hydraulic Turbines (1965)Acceptance Tests of Storage Pumps (1968)Acceptance Tests (1962)Acceptance Tests (1973)Acceptance (1971) Rec. for ShoAccessoriesCondenser Bobbins for Woollen (Woolen) SpAccessories-Cone Sectional Warping Machines-MaximumAccessoriesCylindrical Tubes for Tape Yarns (1972)Accessories Nonreversible Rings for Ring Spinning andAccessoriesPirn and Cross Winders Definition of SIAccessories-Reversible Rings for Ring Spinning and DoAccessoriesSpindle Gauges for Ring Spinning and DoubAccessoriesTubes for Draw Winders for Man Made FibreAccessoriesWeaving Preparatory Machines DefinitionAccessoriesWorsted and Woollen CardsWorking WidthAccessories for Fluid Power Transmission (1970) /for GAccessories (1960) Rec.Accessories (1966)Accessories (1968) Rec. for DAccessories (1968) Rec. for MAccessories (1969)Accessories (1971)Accessories, Lighting, Accumulator (Storage), BatteriesAccessories: External, for Alternating Voltages Up to 2Accessories: Internal, for Alternating Voltages Up to 2Accessories: Paper Insulated, Metal Sheathed, for AlterAccessory Electrometers (1971) Rec. forAccessory Shoes (1966)Accumulator (Storage), Batteries, Heating and Cooking aAccumulators (1960) Rec. GrAccumulators: Aerials (Antennas) and Radio Stations (19Accumulators: Microwave Technology (1968) Rec. for GrAccuracy Class) (1970)Accuracy Class) (1972)Accuracy (1970)Accuracy (1970)Accuracy (1971)Accuracy (1971)Accuracy (1971)Acetate and Magnesium Acetate (1970)Acetate Before and After Heating (1970)

/Nternational Rec. for CylindriInternational RecRec. for Test Con

/G Machines with Table of of Variable/ for Milling Machines with Table of F

/Ace Grinding Machines with Horizontal/Rface Grinding Machines with Vertical

/ Industrial UseRec. for

Acetate in Dilute Solution (1970) /Plastics- DeterminAcetate in Vinyl Chloride-Vinyl Acetate Copolymers (197Acetate (1967) Rec. for Plastics-DetermiAcetate (1968) Rec. for

IEC 385IEC 279IEC 252IEC 99-1IEC 292-1IEC 292-2ISO 4ISO 833ISO 832ISO 1043ISO 1929ISO 1117ISO 525ISO 603ISO 2235ISO 2421ISO 2422ISO 901ISO 769ISO 354ISO 2071ISO 2069ISO 1600ISO 535ISO 2417ISO 62ISO 117ISO 2143ISO 214ISO 1419ISO 188ISO 2440ISO 1110ISO 1462IEC 68-2-4IEC 355IEC 68-2-7ISO 1160IEC 376IEC 41IEC 193IEC 198IEC 46-2ISO 2314ISO 1834ISO 1946ISO 2012ISO 2065ISO 96ISO 141ISO 95ISO 94ISO 2105ISO 142ISO 342ISO 1219IEC 51IEC 230IEC 258ISO 839ISO 113IEC 117-14IEC 92-6IEC 141-3IEC 141-2IEC 141-1ISO 1759ISO 518IEC 92-6IEC 117-2IEC 117-10IEC 117-11OIML 1OIML 2ISO 1708ISO 1701ISO 1984ISO 1986ISO 1985ISO 1551ISO 1600ISO 1157ISO 1159ISO 585ISO 872

Engineering and Product Standards Division 1


: Determination of Free Acidity of Unplasticized Celluloseastics-Delermination of Insoluble Particles in Cellulose

- Determination of Viscosity Loss on Moulding of Celluloseermination of Acetic Acid Yield of Unplasticized Cellulose

ium-Gravimetric Meth. Using Uranyl Acetate and Magnesiumion of Ethyl Ether Soluble Matter in Plasticized Cellulose

Rec. for Solvent

8) Rec. for

970) Rec. for PlasticsDetermination of

68) Rec. for

cids Other Than Formic (Less Than 0.5% (m/m) Calculated asRec. for

e Extract from Brown Coals and Lignites Determination ofRec. for Plastics Determination of the Percentage of

e Unmoulded Sta/ Rec. for Plastics Determination of theree Alcohols Content by Determination of Ester Value After

Rec. for Aceticn Content; 2,2' Bipyridyl Spect/ Rec. for Sulphuricidue on Ignition; Gravimetric Meth. (/ Rec. for Sulphurical Acidity and Calculation of Free So/ Rec. for Sulphurical Nitrogen Content: Volumetric Meth./ Rec. for Sulphuricphur Dioxide Content: Barium Sulphate/ Rec. for Sulphuricides of Nitrogen-2,4-Xylenol Spec/ Std. for Sulphuricithiocarbamate Photometric Meth. (1972) Std. for Boric1 Use Determination of Manganese Conten/ Std. for Boric

rial Use: Determination of Matter Insoluble in Water or inRec. for Phenol: Ortho, Meta, and Para Cresol, CresylicRec. for Phenol: Ortha, Meta, and Para Cresol, CresylicRec. for Phenol: Ortha, Meta, and Para Cresol, Cresylic

Densit/ Rec. for Liquefied Phenol: Meta Cresol, CresylicDistillation Range (1971) Rec. for CresylicResidue on Distillation (1971) Rec. for CresylicOrtha Cresol Content (1971) Rec. for Cresylicolour (Color) (1971) Rec. for Cresylicof Hydrogen Sulphide (1971) Rec. for Cresylic

on of the Resistance of Glass to Attack by 6N Hydrochloricsulphuric Acid for Industrial Use: Evaluation of Sulphuricor Hydrochloric Acid for Industrial Use: Evaluation of Its

Acetate (1969)Acetate (1970)Acetate (1970)Acetate (1970)Acetate (1970)Acetate (1971)

Rec. for PlasticsRec. for PI

Rec. for PlasticsRec. for Plastics Det

/ Industrial UseDetermination of SodRec. for Plastics-Determinat

lumetric Meth. (1971): 2, 2'-Bipyridyl Photometric Meth/: 2, 2'-Bipyridyl Photometric Meth/2, 2'Bipyridyl Spectrophot/- Volumetric Meth. (1972)of Volatile Acids Other Than Formic (Le/content (1971)ounds Volumetric Meth. (1971)ontent-Volumetric Meth. (1968)tent- Volumetric Meth. (1968)sidue on IgnitionGravimetric Meth. (1/2,2' Bipyridyl Spectrophoto/reducing Substances Volumetric Met/ent; Barium Sulphate Gravimetric M/: Gravimetric Meth. (1968): Volumetric Meth. (1968)ration by Measurement of Density (/oncentration by Measurement of Densit/

Rec. for Nitric

Rec. for FormicRec. for Nitric

Rec. for PhosphoricStd. for Boric

Rec. for FormicRec. for Cresylic

Rec. for NitricRec. for PhosphoricRec. for Phosphoric

Rec. for NitricRec. for HydrochloricRec. for HydrochloricRec. for HydrochloricRec. for Hydrochloric

Rec. for HydrochloricRec. for Hydrochloric

Rec. for SulphuricRec. for Formic

Rec. for Determination of BoricRec. for Pulps: Determination of

Rec. for Spices and Condiments: Determination ofRec. for TeaDetermination of

Rec. for Dimensions of LeadRec. for Determination of Volatile Fatty

nals (1963) Rec. for LeadRec. for Lead

of Test (1972) Rec. for LeadRec. for Lead

Loss of Absorptive Power by Colorant Drop Test with Priore Solution for Analysis by Means of Attack by Hydrochloric

Rec. for Butter-Determination of theRec. for Essential Oils-Determination of

Rec. for Plastics Determination of Aceticd Residues: Determination of Ash Insoluble in Hydrochloric

or Industrial Use-Test for Colour (Color) with SulphuricProducts Determination of Ash Insoluble in Hydrochloric

ion of Sodium and Potassium Soluble in Dilute Hydrochloricontent-Spectrophotometric Meth. Using Naphthalhydroxamicion of Titanium Spectrophotometric Meth. with Chromotropic

um Borates for Industrial Use: Determinat/ Std. for Boriccerine for Industrial Use-Determination of Alkalinity orrec. for Nitric Acid for Industrial Use-Determination of

ammonium Nitrate for Industrial Use: Determination of FreeAcid and Oleum for Industrial Use: Determination of Total

Rec. for Oleaginous Seeds: Determination ofRec. for Plastics: Determination of Free

or Potassium Sulphate for Industrial Use: Determination of

Acetates for Industrial Use-Meth. of Test (1970)Acetic Acid and for Industrial Use Meth. of Test (196Acetic Acid Yield of Unplasticized Cellulose Acetate (1Acetic Anhydride for Industrial Use Meth. of Test (19Acetic)Volumetric Meth. (1971) /Tents of Volatile aAcetone for Industrial Use-Meth. of Test (1968)Acetone Soluble Material (Resinous Substances) (1969)Acetone Soluble Matter in Phenolic Mouldings (1958)Acetone Soluble Matter (Resin Content of Material in ThAcetylation (1971) /R Essential Oils-Estimation of FAcid and for Industrial Use-Meth. of Test (1968)Acid and Oleum for Industrial Use: Determination of IroAcid and Oleum for Industrial Use: Determination of ResAcid and Oleum for Industrial Use: Determination of TotAcid and Oleum for Industrial Use: Determination of TotAcid and Oleum for Industrial Use; Determination of SulAcid and Oleums for Industrial Use: Determination of OxAcid and Oxide, and Disodium Tetraborates for DibenzyldAcid and Oxide, and Disodium Tetraborates for IndustriaAcid and Preparation of Principal Solutions for Other DAcid and Xylenols for Industrial Use-Determination ofAcid and Xylenols for Industrial Use Determination ofAcid and Xylenols for Industria] UseDetermination ofAcid and Xylenols for Industrial UseDetermination ofAcid and Xylenols for Industrial Use Determination ofAcid and Xylenols for Industrial Use Determination ofAcid and Xylenols for Industrial Use Determination ofAcid and Xylenols for Industrial UseMeasurement of CAcid and Xylenols for Industrial Use-Test for AbsenceAcid at 100 C (1970) Rec. for DeterminatiAcid Concentration by Measurement of Density (1968) /Acid Concentration by Measurement of Density (1968) /FAcid for Industrial Use Determination of AcidityVoAcid for Industrial Use Determination of Iron ContentAcid for Industrial Use Determination of Iron ContentAcid for Industrial Use Determination of Iron ContentAcid for Industrial Use-Determination of Its ContentAcid for Industrial Use Determination of Low ContentsAcid for Industrial Use Determination of Meta CresolAcid for Industrial Use-Determination of Nitrous CompAcid for Industrial UseDetermination of of Calcium CAcid for Industrial Use-Determination of Sulphate ConAcid for Industrial Use Determination of Sulphated ReAcid for Industrial Use: Determination of Iron Content:Acid for Industrial Use: Determination of Oxidizing orAcid for Industrial Use: Determination of Sulphate ContAcid for Industrial Use: Determination of Sulphated AshAcid for Industrial Use: Determination of Total AcidityAcid for Industrial Use: Evaluation of Its Acid ConcentAcid for Industrial Use: Evaluation of Sulphuric Acid CAcid for Industrial Use: Meth. of Test (1968)Acid in Latex (1970)Acid Insoluble Ash (1968)Acid Insoluble Ash (1969)Acid Insoluble Ash (1970)Acid Motor Scooter Batteries (1965)Acid Number of Latex (1966)Acid Starter Batteries: Dimensions and Marking of TermiAcid Starter Batteries: Dimensions of Batteries (1965)Acid Starter Batteries: General Requirements and Meth.Acid Traction Batteries (1967)Acid Treatment (1971) / Its Alloys Estimation of theAcid Under Pressure (1971) /lum-Preparation of SamplAcid Value of the Fat (Reference Meth.) (1971)Acid Value (1971)Acid Yield of Unplasticized Cellulose Acetate (1970)Acid (1968) Rec. for OilseeAcid (1970) Rec. for Higher Alcohols FAcid (1971) Rec. for Fruit and VegetableAcid (1971) /Meth. of Extraction for the DeterminatAcid (1971) / of Aluminum Determination of Calcium CAcid) (1969) /Uminum and Aluminium Alloys DeterminatAcid, Boric Oxide, Disodium Tetraborates and Crude SodiAcidity- Volumetric Meth. (1970) /Dric Alcohols-GlyAcidity-Volumetric Meth. (1971)Acidity-Volumetric Meth. (1972) Std. forAcidity and Calculation of Free S0 3 Content of Oleum;Acidity of Oils (1968)Acidity of Unplasticized Cellulose Acetate (1969)Acidity to Methyl Orange (1973) Std. F

ISO 1061ISO 1598ISO 1599ISO 1597ISO 1551ISO 1875ISO 1386ISO 753ISO 1597ISO 754ISO 1913ISO 757ISO 1017ISO 59ISO 308ISO 1241ISO 753ISO 915ISO 913ISO 910ISO 914ISO 912ISO 2363ISO 2215ISO 2214ISO 2479ISO 1897ISO 1898ISO 1899ISO 1903ISO 1906ISO 1907ISO 1910ISO 1909ISO 1908ISO 1776ISO 911ISO 905ISO 1980ISO 1707ISO 1982ISO 849ISO 1914ISO 1913ISO 1911ISO 1981ISO 848ISO 847ISO 1983ISO 909ISO 908ISO 906ISO 907ISO 904ISO 905ISO 911ISO 731ISO 1802ISO 776ISO 930ISO 1577IEC 199ISO 506IEC 95-3IEC 95-2IEC 95-1IEC 254ISO 2143ISO 2073ISO 1740ISO 1242ISO 1597ISO 735ISO 1852ISO 763ISO 1952ISO 2070ISO 1118ISO 1918ISO 1615ISO 1980ISO 2364ISO 910ISO 729ISO 1061ISO 2489

2 Engineering and Product Standards Division


for Higher Alcohols for Industrial Use-Determination ofRec. for Crude Vegetable Oils and Fats: Determination ofFruit and Vegetable Products: Determination of Titratableted Hydrocarbons for Industrial Use Determination of theormaldehyde Solutions for Industrial Use: Determination ofdrochloric Acid for Industrial Use: Determination of Totalindustrial Use Determination of Low Contents of Volatilenimal Fats: Determination of Solidification Point of Fatty

. for Analysis of Soap: Determination of Total Crude Fattyalves: Meth. of Measurement of Noises Due to Mechanical or

Rec. for Sound Signalling Devices on Motor VehiclesRec. for Preferred Frequencies for

ty Response (1971) Rec. foror Hearing Conservation Purposes (1971) Rec. for

Rec. for Quantities and Units oferties of Sonic Booms (1973) Std. for'

rmination of the Loss of Plasticizers from Plastics by theHardness (1972) Std. for Surfaceh. of Analysis (1969) Rec. for Surface

Rec. for Surfacesample (1967) Rec. for Surface

ination of the Cloud Point Temperature of Nonionic SurfaceGlycols and Nonionic Active Matter (Ad/Contents of Free GlycerolSpectropho/tive Matter (Direct Two Phase Titration/tes on Filling (1969)hing Powders Before and After Compactio/(1969)

erfacial Tension (1963)ture of Nonionic Surface Active Agents /rmination of Oxyethylene Groups (1972)

Std. for SurfaceStd. for Surface

Std.

Rec.

Rec.Rec.Rec.

Rec.Rec.Rec.Std.

Rec.

for Surface

for Surfacefor Surfacefor Surfacefor Surface

Rec. for SurfaceStd. for Surface

for Surface

for Surfacefor Surfacefor Surface

for SurfaceRec. for SurfaceRec. for SurfaceStd. for Surface

of Analysis (1968)Meth. of Analysis (1968)

s: Meth. of Analysis (1968)ering Preparation and Use of Unsoiled/

power Sources for Portable Prospecting Equipment for Radior and Land Vehicle Mounted Prospecting Equipment for Radio

ionic): Determination of Polyethylene Glycols and Nonionicof Chemical Analysis of Manganese OresDetermination of

Rec. for Numeric Section of Ten Key Keyboards forRec. for Keytop and Printed or Displayed Symbols for

Rec. for Classification ofRec. for Picture Postcards: Area Reserved for the

s (1972) Std. for Surface Active Agents: Ethylene Oxidenation of Polyethylene Glycols and Nonionic Active Matter

Rec. for Plyec. for Preparation of Test Piece and Meth. of Test of theec. for Preparation of Test Piece and Meth. of Test of the

(Quadruple-Shear Test) (1971) Rec. for Determination ofics (1969) Rec. for Determination of thes (1960) Rec. for Limiting Values for the

Rec. for Principles of Construction and1964) Rec. for Principles of Construction and

Rec. for Principles of Construction andf Electronic Tubes and Valves: Equivalent Input and Output

r Radio Frequency Connectors: Coaxial Unmatched TelevisionFrequency Connectors: Two Pin Connector for Twin Balanced

Rec. for Dimensions ofeasurement of Essential Electrical Properties of Receiving

a: Machines, Transformers, Primary Cells and Accumulators:s Mechanical Handling Equipment for Loose Bulk Materials

Rec. forh Rubber or Plastics (1970) Rec. for Accelerated

Rec. for Vulcanized RubbersAcceleratedStd. for Flexible Cellular Materials-Accelerated

ss (1972) Std. for Surface Activenalysis (1969) Rec. for Surface Active

Rec. for Surface Active

(1967) Rec. for Surface Active

of the Cloud Point Temperature of Nonionic Surface Actives and Nonionic Active Matter (Ad/ts of Free Glycerol-Spectropho*/tter (Direct Two Phase Titration/filling (1969)

wders Before and After Compactio/

1 Tension (1963)Nonionic Surface Active Agents /on of Oxyethylene Groups (1972)

Std. for Surface Active

Std. for Surface ActiveStd. for Surface ActiveRec. for Surface ActiveRec. for Surface ActiveRec. for Surface ActiveRec. for Surface Active

Rec. for Surface Active

Std. for Surface ActiveRec. for Surface ActiveRec. for Surface ActiveRec. for Surface Active

Acidity to Phenolphthalein (1970) Rec.Acidity (1968)

Acidity (1968) Rec. forAcidity (1970) Rec. for Liquid HalogenaAcidity (1972) Std. for FAcidity: Volumetric Meth. (1968) Rec. for HyAcids Other Than Formic (Less Than 0.5% (m/m) CalculateAcids (Titre) (1969) Rec. for aAcids (1965) RecAcoustic Excitations (1968) /of Electronic Tubes and VAcoustic Std. and Technical Spec. (1966)Acoustical Measurements (1962)AcousticsAssessment of Noise with Respect to CommuniAcousticsAssessment of Occupational Noise Exposure FAcoustics (1965)Acoustics: Description and Measurement of Physical PropActivated Carbon Meth. (1961) /Ec. for Plastics-DeteActive Agents Preparation of Water with Known CalciumActive AgentsTechnical Sodium AlkylsulphonatesMetActive Agents-Vocabulary (1969)Active Agents in Powder Form: Preparation of a ReducedActive Agents Obtained from Ethylene Oxide (1969) /ErmActive Agents (Nonionic): Determination of PolyethyleneActive Agents: Analysis of Soaps Determination of LowActive Agents: Detergents Determination of Anionic-AcActive Agents: Determination of Apparent Density of PasActive Agents: Determination of Apparent Density of WasActive Agents: Determination of Stability in Hard WaterActive Agents: Determination of Surface Tension and IntActive Agents: Determination of the Cloud Point TemperaActive Agents: Ethylene Oxide Adducts lodometric DeteActive Agents: Glossary (1971)Active Agents: Measurement of Foaming Power (1968)Active Agents: Scientific Classification (1968)Active Agents: Simplified Classification (1972)Active Agents: Technical Sodium Alkylsulphonates: Meth.Active Agents: Technical Sodium Primary Alkylsulphates:Active Agents: Technical Sodium Secondary AlkylsulphateActive Agents; Verification of Certain Effects of LaundActive Materials (1965) Rec. forActive Materials (1967) Rec. or Power Supply for AiActive Matter (Adducts)-Weibull Meth. (1972) /S (NonActive OxygenConventionally Expressed as Manganese DAdding and Calculating Machines (1969)Adding and Calculating Machines (1969)Adding and Calculating Machines (1969)Address (1965)Adducts-Iodometric Determination of Oxyethylene Group(Adducts)-Weibull Meth. (1972) /S (Nonionic): DetermiAdhesion of Conveyor Belts (1962)Adhesion of Vulcanized Rubber to Metal Where the RubberAdhesion of Vulcanized Rubber to Metal Where the RubberAdhesion of Vulcanized Rubbers to Rigid Plates in ShearAdhesion Strength of Vulcanized Rubbers to Textile FabrAdjustment of Centres (Centers) for Transmission PulleyAdjustment of Hydrometers (1964)Adjustment of Liquid in Glass Laboratory Thermometers (Adjustment of Volumetric Glassware (1964)Admittances (1963) /Nts of the Electrical Properties OAerial Feeder Connector (1965) Rec. FoAerial Feeders (1965) Rec. for RadioAerial Rods and Slabs of Ferromagnetic Oxides (1966)Aerials in the Frequency Range Form 30 MHz to 1,000 MHzAerials (Antennas) and Radio Stations (1968) /L SymbolAeroslides (1972) Std. for ContinuouAgar Impression Material (1970)Ageing and Simulated Service Test of Fabrics Coated WitAgeing or Heat Resistance Tests (1971)Ageing Tests (1972)Agents-Preparation of Water with Known Calcium HardneAgents-Technical Sodium Alkylsulphonates-Meth. of aAgents Vocabulary (1969)Agents in Powder Form: Preparation of a Reduced SampleAgents Obtained from Ethylene Oxide (1969) /ErminationAgents (Nonionic): Determination of Polyethylene GlycolAgents: Analysis of Soaps Determination of Low ContenAgents: Detergents-Determination of Anionic-Active MaAgents: Determination of Apparent Density of Pastes onAgents: Determination of Apparent Density of Washing PoAgents: Determination of Stability in Hard Water (1969)Agents: Determination of Surface Tension and InterfaciaAgents: Determination of the Cloud Point Temperature ofAgents: Ethylene Oxide Adducts-Iodometric DeterminatiAgents: Glossary (1971)Agents: Measurement of Foaming Power (1968)Agents: Scientific Classification (1968)

ISO 1846ISO 660ISO 750ISO 1393ISO 2225ISO 904ISO 1913ISO 935ISO 455IEC 151-18ISO 512ISO 266ISO 1996ISO 1999ISO 31/VIIISO 2249ISO 176ISO 2174ISO 1104ISO 862/1ISO 607ISO 1065ISO 2268ISO 2272ISO 2271ISO 1064ISO 697ISO 1063ISO 304ISO 1065ISO 2270ISO 862ISO 696ISO 896ISO 2131ISO 893ISO 894ISO 895ISO 2267IEC 201IEC 253ISO 2268ISO 312ISO 1092ISO 1093ISO 1094ISO 416ISO 2270ISO 2268ISO 252ISO 813ISO 814ISO 1747ISO 36ISO 155ISO 387ISO 386ISO 384IEC 151-3IEC 169-2IEC 169-3IEC 223IEC 138IEC 117-10ISO 2326ISO 1564ISO 1419ISO 188ISO 2440ISO 2174ISO 1104ISO 862/1ISO 607ISO 1065ISO 2268ISO 2272ISO 2271ISO 1064ISO 697ISO 1063ISO 304ISO 1065ISO 2270ISO 862ISO 696ISO 896

Engineering and Product Standards Division

530-625 O-LT - 74 - 2


Sid. for Surface Active Agents: Simplified Classification (1972) ISO 2131lysis (1968) Rec. for Surface Active Agents: Technical Sodium Alkylsulphonates: Meth. of Ana ISO 893of Analysis (1968) Rec. for Surface Active Agents: Technical Sodium Primary Alkylsulphates: Meth. ISO 894of Analysis (1968) Rec. for Surface Active Agents: Technical Sodium Secondary Alkylsulphates: Meth ISO 895Preparation and Use of Unsoiled/ Std. for Surface Active Agents: Verification of Certain Effects of Laundering- ISO 2267

2) Std. for CorkExpanded Pure Agglomerated Deformation Under Constant Pressure (197 ISO 2191Std. for Cork-Expanded Pure Agglomerated-Determination of Bulk Density (1972) ISO 2189

nd Packing (1972) Std. for Cork-Expanded Pure Agglomerated Thermal Cork Characteristics, Sampling a ISO 2219Determination of Nitrogen by the Kjeldahl Meth/ Rec. for Agricultural Food ProductsGeneral Directions for the ISO 1871

Rec. for General Purpose Agricultural Rubber Spray Hose (1970) ISO 1401Rec. for Power Take Off and Draw Bar for Agricultural Tractors (1966) ISO 500

Rec. for Test Code for Agricultural Tractors (1968) ISO 789Implements (1968) Rec. for 3 Point Linkage of Agricultural Wheeled Tractors for Attachment of Mounted ISO 730

. for IEC Reference Coupler for the Measurement of Hearing Aids Using Earphones Coupled to the Ear by Means of Ins IEC 126Rec. for the Dimensions of Polarized Plugs for Hearing Aids (1957) IEC 90

ements of the Electroacoustical Characteristics of Hearing Aids (1959) Rec. Meth. for Measur IEC 118Rec. for Marking of Control Settings on Hearing Aids (1966) IEC 224

pment Safety) (1961). Aim, Structure, and Results of the CEE (Electrical Equi CEE 8radio Active Materials (1967) Rec. or Power Supply for Air and Land Vehicle Mounted Prospecting Equipment for IEC 253

Rec. for High Pressure Air Charging Valves for Aircraft (1969) ISO 1023Rec. for Test, and Rating Room Air Conditioners (1968) ISO 859

r Safety Requirements for the Electrical Equipment of Room Air Conditioners (1972) Rec. Fo IEC 378Rec. for Aircraft Connections for Ground Air Conditioning (1969) ISO 1034

irements for Tests and Measuring Meth. (1970) Rec. for Air Dielectric Rotary Variable Capacitors: General Requ IEC 334-1Rec. for Industrial Air Hose (1970) ISO 1404

of Wool Fibres (Fibers) (1969) Rec. for Air Permeability Meth. for Measuring the Mean Diameter ISO 1136dures for Electronic Components and Equipment: Test M: Low Air Pressure (1966) /R Basic Environmental Test. Proce IEC 68-2-13

Rec. for Creepage Distances and Clearances in Air (1964) CEE REC 3Flight Dynamics-Part I: Aircraft Motion Relative to the Air (1972) Std. for Symbols for ISO 1151

Rec. for Field and Laboratory Measurements of Airborne and Impact Sound Transmission (1960) ISO 140tended for Outdoor Use (1972) Std. for Measurement of Airborne Noise Emitted by Compressor Primeover Units in ISO 2151(1970) Rec. for Test Code for the Measurement of the Airborne Noise Emitted by Rotating Electrical Machinery ISO 1680nd Fuse Combinat/ Rec. for Low Voltage Airbreak Switches, Airbreak Disconnectors, Airbreak Switch Disconnectors a IEC 408

for Low Voltage Airbreak Switches, Airbreak Disconnectors, Airbreak Switch Disconnectors and Fuse Combination Unit IEC 408tch Disconnectors and Fuse Combinat/ Rec. for Low Voltage Airbreak Switches, Airbreak Disconnectors, Airbreak Swi IEC 408

Std. for Sealed Beam Landing Lamps for AircraftDimensions (1972) ISO 1198Rec. for Precision Fuse Links for AircraftGeneral Requirements (1971) ISO 1547

Rec. for Liquid Oxygen Replenishment Couplings for AircraftInterchangeably Dimensions (1971) ISO 1465Rec. for Elastomeric Sealing Rings for Aircraft- Packaging and Identification (1971) ISO 1749

of Elastomeric Toroidal Sealing Rings for Pipe Fittings in Aircraft-(In. SeriesClass 2 Tolerances) (1971) / ISO 1799. for Dimensions of Elastomeric Toroidal Sealing Rings for Aircraft (In. SeriesClass 2 Tolerances) (1971) /C ISO 1800

Std. for Aluminium Terminal Ends for Crimping to Aircraft Aluminum Electrical Cables (1973) ISO 1965for Symbols for Flight Dynamics-Part II: Motions of the Aircraft and the Atmosphere Relative to the Earth (1969 ISO 1152

5) Rec. for Aircraft Connection for Water of Drinkable Quality (196 ISO 450Rec. for Aircraft Connections for Ground Air Conditioning (1969) ISO 1034

Breaking Strengths of Preformed Stranded Steel Cables for Aircraft Controls (1967) / Designations, Diameters and ISO 564Std. for Flexible Steel Wire Rope for Aircraft Controls: Technical Spec. (1973) ISO 2020

Std. for Crimped Joints for Aircraft Electrical Cables (1973) ISO 1966Rec. for Std. Form of Declaration of Performance of Aircraft Electrical Equipment (1961) ISO 224

Std. for Tests for Aircraft Electrical Plug and Socket Connectors (1972) ISO 2100Rec. for Voltages for Aircraft Electrical Systems (1961) ISO 222

Rec. for Aircraft Engine Nacelle Fire Extinguisher Doors (1969) ISO 1021ers, and Direction of Rotation of / Rec. for Numbering of Aircraft Engines, Engine Cylinders and Combustion Chamb ISO 482

Rec. for Aircraft Fuel Nozzle Grounding Plugs and Sockets (1970) ISO 46Rec. for Marking of Aircraft Gas Cylinders (1965) ISO 443

Rec. for Connections for Aircraft Ground Electrical Supplies (1965) ISO 461(1971) Rec. for Rubber Hoses for Aircraft Ground Fueling Without Static Conducting Wire ISO 1825

Rec. for Sizes and Mounting Dimensions of Aircraft Instrument Cases (Rear Mounting Type) (1959) ISO 103Rec. for Figures for Aircraft Instrument Dials and Number Plates (1962) ISO 267

Rec. for Aircraft Instrument Dials and Pointers (1962) ISO 268Rec. for Aircraft Jacking Pads (1957) ISO 43Rec. for Aircraft Lockwire (1962) ISO 245

Rec. for Heads of Aircraft Lubricating Nipples (1965) ISO 413Std. for Symbols for Flight Dynamics-Part I: Aircraft Motion Relative to the Air (1972) ISO 1151

Rec. for Monitoring Aircraft Noise Around an Airport (1970) ISO 1761Rec. for Procedure for Describing Aircraft Noise Around an Airport (1970) ISO 507

Rec. for Identification of Aircraft Pipelines (1970) ISO 12Rec. for Aircraft Pressure Cabin Ground Test Connection (1954) ISO 11Rec. for Aircraft Pressure Refueling Connections (1957) ISO 45Rec. for Aircraft Pressure Reoiling Connection (1965) ISO 451Rec. for Aircraft Sealing Wire (1962) ISO 244Rec. for Aircraft Seat Rails and Pins (1968) ISO 837

Rec. for Safety Features for Ground Power Units for d.c. Aircraft Servicing and Engine Starting (1961) ISO 223) Rec. for Aircraft Toilet Flushing and Draining Connections (1957 ISO 47

Rec. for Aircraft Tow Bar Connections to Tractors (1964) ISO 405Rec. for Aircraft Tyre (Tire) Valves (1965) ISO 414Std. for Aircraft Water Methanol Pressure Connections (1973) ISO 485

. for Dimensions of Elastomeric Toroidal Sealing Rings for Aircraft (In. SeriesClass 1 Tolerances) (1969) Rec ISO 1078of Elastomeric Toroidal Sealing Rings for Pipe Fittings in Aircraft (In. Series-Class 1 Tolerances) (1969) /Ns ISO 1077

Rec. for Precision Fuse Links for Aircraft (Type A) (1971) ISO 1548Rec. for Precision Fuse Links for Aircraft (Type B) (1971) ISO 1549

Rec. for Directions of Operation of Toggle Switches on Aircraft (1957) ISO 44Rec. for Gravity Filling Orifices for Aircraft (1959) ISO 102

(Color) Identification of Mechanical Control Circuits for Aircraft (1959) Rec. for Colour ISO 130ions for Single Hole Mounting, Lever Operated Switches for Aircraft (1966) Rec. for Dimens ISO 493general Purpose Push Pull Single Pole Circuit Breakers for Aircraft (1966) Rec. for Dimensions for ISO 530



neral Purpose Electrical Cables with Copper Conductors fo(190 C) Electrical Cables with Copper Conductors, fo

eral Purpose Electrical Cables with Copper Conductors, foneral Purpose Electrical Cables with Copper Conductors fo

(260 C) Electrical Cables with Copper Conductors foec. for Requirements for 28 Volt d.c. Flat Strip Fuses fo

Rec. for Gaseous Oxygen Replenishment Couplings foRec. for High Pressure Air Charging Valves fo

hape, Size and Direction of Operation of Lever Controls onfor General Purpose Push Pull 3 Pole Circuit Breakers fo

cal Cables with Aluminium or Aluminum Alloy Conductors fo(190 C) Electrical Cables with Copper Conductors fo

Rec. for Clearance Dimensions for Tripod Jacks formance Requirements for Lever Operated Manual Switches fo

for General Purpose Push Pull 3 Pole Circuit Breakers fo(260 C) Electrical Cables with Copper Conductors fo

cal Cables with Aluminum or Aluminium Alloy Conductors fong (190 Deg.) Electrical Cables with Copper Conductors fogeneral Purpose Push Pull Single Pole Circuit Breakers fo

(260 C) Electrical Cables with Copper Conductors foStd. for Heat Resisting Equipment Wires fo

Std. for Static Invertors fo

ectors for Automatic Coupling (1973) Std. fo:Std. for Heat Resisting Equipment Wires foi

for ISO Identification Code for Rolling Bearings: Group Volerances. Permissible Load (/ Rec. for Rolling Bearings:

Rec. for Monitoring Aircraft Noise Around anrec. for Procedure for Describing Aircraft Noise Around an

Rec. for IsopropylRec. for Spices and Condiments: Determination of

of Alkalinity or Acidity / Rec. for Aliphatic Polyhydricof Sulphated Ash in Produ/ Rec. for Aliphatic Polyhydricest Meth. -General (1970) Rec. for Aliphatic Polyhydricacetylation/ Rec. for Essential OilsEstimation of Free

igher Alcohols for Industrial Use Determination of Total

/. for Performance Requirements for Ge/Nductor Resistance of Heat Resisting

/Sions and Conductor Resistance of GenRec. for Meth. of Test for Ge

/Onductor Resistance of Heat Resisting

t 20 C (1970)to Phenolphthalein (1970)vimetric Meth.) (1970)index in the Presence of Mercury (II) Ch/Compounds (Hydroxylammonium Chloride Po/lion Yield (1970)cohols Content (Volumetric Meth.) (1970)ntent by the Karl Fischer Meth. (1970)lor) in Hazen Units (1970)ith Sulphuric Acid (1970)

Rec. for HigherRec. for HigherRec. for HigherRec. for HigherRec. for HigherRec. for HigherRec. for HigherRec. for HigherRec. for HigherRec. for Higher

Rec. forStd. for Programming Language:

Rec. for Rolling Bearings- Double Row Self -1 Use-Samples and Test Meth. -General (1970) Rec. for1 Use Determination of Alkalinity or Acidity / Rec. for1 Use-Determination of Sulphated Ash in Produ/ Rec. for

sium and Its Alloys Determination of Insoluble Zirconiumesium and Its Alloys-Determination of Soluble Zirconium

Rec. for Pulps: Determination ofRec. for Pulps: Determination of

Rec. for Analysis of Soaps: Determination of Total FreeRec. for Analysis of Soaps: Determination of Total

of Glass to Attack by a Boiling Aqueous Solution of MixedStd. for Analysis of Soap: Determination of Free Causticustrial Use (Including Foodstuffs): Determination of Total

Rec. for Determination ofRec. for Tea-Determination of

alcoholsGlycerine for Industrial Use-Determination ofRec. for Urea for Industrial Use-Determination of

sium Silicates for Industrial Use-Determination of Totalfor Sodium Hydroxide for Industrial Use: Determination ofrbonate for Industrial Use: Determination of Total Soluble

r Potassium Hydroxide for Industrial Use: Determination ofRec. for Surface Active Agents: Technical Sodium Primary

rec. for Surface Active Agents: Technical Sodium SecondaryRec. for Surface Active AgentsTechnical SodiumRec. for Surface Active Agents: Technical Sodium

men! (1973) Std. for Connector Pinand Tempered Types with 1% Chromi/ Rec. for Heat Treated,n Type (1959) Rec. for Heat Treated Aluminium (Aluminum)

Std. for Magnesium Zinc Zirconiumec. for Composition of Magnesium Aluminium (Aluminum) Zinc

Rec. for Composition of Aluminium (Aluminum)Rec. for Composition of Aluminium (Aluminum)

Std. for Aluminium (Aluminum)Rec. for an International Spec, for Aluminium (Aluminum)

neral Purpose Electrical Cables with Aluminium or Aluminumneral Purpose Electrical Cables with Aluminum or Aluminium

Rec. for Aluminium (Aluminum)Rec. for

Rec. for Mechanical Property Limits for Aluminium

Rec. for SRec. for Dimensions

Rec. for General Purpose Electri/Mance Requirements for Heat Resisting

Rec. for PerfoRec. for Performance Requirements

/ for Meth. of Test for Heat Resisting/, of Test for General Purpose Electri/C. for Meth. of Test for Heat Resisti

/Ec. for Performance Requirements for/Mance Requirements for Heat Resisting

Rec.

Aircraft (1966)

Aircraft (1966)

Aircraft (1966)

Aircraft (1967)

Aircraft (1967)

Aircraft (1968)

Aircraft (1969)

Aircraft (1969)

Aircraft (1969)

Aircraft (1969)

Aircraft (1969)

Aircraft (1969)

Aircraft (1970)

Aircraft (1970)

Aircraft (1970)

Aircraft (1970)Aircraft (1970)

Aircraft (1970)

Aircraft (1970)

Aircraft (1970)

Aircraft (1973)

Aircraft (1973)

Aircraft: Interchangeability Dimensions of Battery ConnAircraft: Meth. of Test (1973)Airframe Type (1968)Airframe: Introduction. General, Boundary Dimensions, TAirport (1970)

Airport (1970)

Alcohol for Industrial Use-Meth. of Test (1968)Alcohol Soluble Extract (1969)AlcoholsGlycerine for Industrial Use DeterminationAlcoholsGlycerine for Industrial Use DeterminationAlcoholsGlycerine for Industrial UseSamples and TAlcohols Content by Determination of Ester Value AfterAlcohols Content (Volumetric Meth.) (1970) Rec. for HAlcohols for Industrial Use Determinaion of Density aAlcohols for Industrial Use Determination of AcidityAlcohols for Industrial UseDetermination of Ash (GraAlcohols for Industrial Use Determination of BromineAlcohols for Industrial Use-Determination of CarbonylAlcohols for Industrial Use Determination of DistillaAlcohols for Industrial Use Determination of Total AlAlcohols for Industrial Use-Determination of Water CoAlcohols for Industrial Use-Measurement of Colour (CoAlcohols for Industrial UseTest for Colour (Color) WAlginate Impression Material (1970)ALGOL (1972)Aligning Ball-Radial Internal Clearance (1970)Aliphatic Polyhydric AlcoholsGlycerine for IndustriaAliphatic Polyhydric AlcoholsGlycerine for IndustriaAliphatic Polyhydric AlcoholsGlycerine for IndustriaAlizarin Sulphonate Photometric Meth. (1972)(Alizarin Sulphonate Photometric Meth.) (1970)Alkali Resistance (1968)Alkali Solubility (1968)

Alkali (1968)

Alkali (1968)

Alkali (1968) /Ec. for Determination of the ResistanceAlkali (1973)

Alkalinity- Volumetric Meth. (1973) /Arbonate for IndAlkalinity of Latex (1966)Alkalinity of Water Soluble Ash (1970)Alkalinity or Acidity- Volumetric Meth. (1970) /DricAlkalinity Volumetric Meth. (1970)Alkalinity, Expressed in Na20 or in K zOVolumetriAlkalinity, Volumetric Meth. (1969) Rec.Alkalinity: Volumetric Meth. (1968) /Ec. for Sodium CaAlkalinity: Volumetric Meth. (1969) Rec. FoAlkylsulphates: Meth. of Analysis (1968)Alkylsulphates: Meth. of Analysis (1968)Alkylsulphonates-Meth. of Analysis (1969)Alkylsulphonates: Meth. of Analysis (1968)Allocations for Use with High Speed Data Terminal EquipAlloy and Free Cutting Steels, Pt. 4: Wrought GuenchedAlloy Busbar Material of the Aluminium Magnesium SilicoAlloy Castings-Chemical Composition (1972)Alloy Castings and Mechanical Properties of Sand Cast RAlloy Castings (Complement to R164) (1961)Alloy Castings (1960)Alloy Chill Castings-Reference Test Bar (1972)Alloy Conductor Wire of the Aluminium Magnesium SiliconAlloy Conductors for Aircraft (1969) Rec. for GeAlloy Conductors for Aircraft (1970) /. of Test for GeAlloy Conductors, Steel Reinforced (1966)Alloy for Dental Amalgam (1970)Alloy Forgings (1968)

/or Magne/of Magn

low 474loU 470ISO 469low 634ISO 539ICAlow 854TenloU 1022low 1023low 440ISO 1033yenlow 1076low 1075low 14641 Cf\IjU 1400icnlet(J louyicn15U 1 A O Ti^y iicn 1 A AQICnloU 1220Ten. 1 /I A7140 /icnlow 1490Tenlow OA.30ICAlOW 0077yenlow i oasiyoaicnlow 2436icnlow JUU/111icnlow 1UUZlow 1 7A 11 i 01icnlow oU /icnlowICOlowlow 1 A 1 rr1010icnlOW 1 Al A1010icnlow 1 A

1

AiOl**icnlOW 1 9d.l1 Z4-1icnlOW lft^nIojUicnlOW 1 QA.A.lo4-ficnlOW lRAAicnlOW lOD 1icnlow lo4-oicnlow 1Q/I7Its'* licnlow 1 QA c:icnlow IodUicnlow 1 QAQicnloW 1 QA 3Tenlow 1 Q^9icnlow 1 CA3icnlowicnlOW 1 AAAicnlOW 1 Al AlO 14-icnlOW 1 Al ^lO IDicnlOW 1 A 1

A

10 10icnlOW ZoD4-icnlOW 1 1 7Q1 1 foicnlow 699icnlowicnlow ACMOo4icnlow 685icnlow 695icnlow 456icnlow 2516icnlow 125icnlow 1578icnlow 1615icnloU 1593icnloU 1692Tenlow 979icnlow 740icnlow yyuicnlow 894icnlow QO.CtjyoicnloO 1 104ISO 893icnlow 2593ISO 683/IVIEC 114ISO 2119ISO 121ISO 208ISO 164icnlow 0Q70

IEC 104ISO 1076ISO 1468IEC 210ISO 1559ISO 829



ranees of Electrodes for the Welding of Mild Steel and Lowual Arc Welds Made with Covered Electrodes of Mild and Low

ols for Killer Rods for Gas Welding of Mild Steels and LowCovered Electrodes for Arc Welding of Mild Steels and Lowposited by Filler Rods for Gas Welding Mild Steels and Low

ec. for Composition of Magnesium Aluminium (Aluminum) ZincRec. for Zinc

(0.1 In.)-Tensile Test (1971) Rec. for Copper andStd. for Magnesium

Std. for Aluminium (Aluminum)imensions and Sectional Properties of Aluminium (Aluminum)

8 In.)/ Rec. for Simple Bend Test for Light Metal and ItsCovered Electrodes for Manual Arc Welding of Mild and Low

ype) (1966) Rec. for Aluminium) Rec. for Copper and Its

Rec. for Tensile Test, of Copper and ItsRec. for Drift Expanding Test on Copper and Its

Rec. for Tensile Test, of Light Metal Ad ItsRec. for Drift Expanding Test on Light Metal and Its

Rec. for Flattening Test on Aluminum and AluminiumRec. for Wrapping Test for Copper and Its

Rec. for Tensile Test, of Copper and ItsRec. for Simple Torsion Test for Aluminum and Aluminium

Rec. for Wrapping Test for Aluminum and AluminiumRec. for Tensile Test for Light Metal and Its

Alloys: Electrolytic Determination of Copper in AluminiumRec. for Dental Casting Gold

Std. for Electroplated Coatings of Tin Nickel

/ for Lengths and Tole/Ons for Straight ManRec. for Code of Symb/R Code of Symbols for/Ties of Weld Metal De

Rec. for Heat Treated,Rec. for Heat Treated,Std. for Heat Treated,Rec. for Heat Treated,Rec. for Heat Treated,Rec. for Heat Treated,Rec. for Heat Treated,Rec. for Heat Treated,Rec. for Heat Treated,Rec. for Heat Treated,

ding Type (1970)hardening Type (1970)uction Hardening Types (1972)empered LInalloyed Types (1968)hed and Tempered Types with 1% Ch/ed and Tempered Unalloyed with Co/ed and Tempered Manganese (1970)ed and Tempered, with 3% Chromium/ed and Tempered Chromium Nickel M/utting Type (1970)

. for Strip Wound Cut Cores of Grain Oriented Silicon IronRec. for Wrought

Rec. for Light Metals and Theirnt of Metals Anodisation of Aluminium (Aluminum) and Its

Composition of Wrought Products of Aluminium and Aluminum1) Rec. for Copper and Its71) Rec. for Copper and Its

Rec. for Light Metals and Theirstd. for Chemical Analysis of Aluminium (Aluminum) and Its

earths, Thorium and Silver-/ Std. for Magnesium and ItsMeth. Using Diphenylcarbazid/ Std. for Aluminium and Its

Rec. for Chemical Analysis of Zincsulphonate Photometric Meth. / Std. for Magnesium and Itsh. (1972/ Std. for Chemical Analysis of Magnesium and Itsmeth. Wi/ Rec. for Chemical Analysis of Magnesium and Itsulphonat/ Rec. for Chemical Analysis of Magnesium and Its

ment of Metals Coloured Anodisation of Aluminium and Itseth/ Rec. for Chemical Analysis of Aluminum and Aluminium) Rec. for Chemical Analysis of Magnesium and Its

rec. for Chemical Analysis of Aluminium (Aluminum) and Itsontaining N/ Rec. for Chemical Analysis of Copper and Its-Copper All/ Rec. for Chemical Analysis of Copper and Its

nt of Metals-Anodisation of Aluminium (Aluminum) and Itsization (Anodic Oxidation) of Aluminium (Aluminum) and Itsisation (Anodic Oxidation) of Aluminium (Aluminum) and Itsisation (Anodic Oxidation) of Aluminium (Aluminum) and Its

Rec. for Chemical Analysis of Copper and ItsRec. for Aluminium (Aluminum)

Rec. for Wrought Aluminum and AluminiumRec. for Aluminium and Aluminum

Rec. for Chemical Analysis of Copper and ItsRec. for Chemical Analysis of Copper and Its

Rec. for Chemical Analysis of Zinc and ItsRec. for Light Metals and TheirRec. for Light Metals and Their

Rec. for Chemical Analysis of Zincfusion Welded Butt Joints for Aluminium (Aluminum) and Its

Rec. for Shipbuilding Details- Wrought AluminumAluminium (Aluminum) and Its Alloys and Magnesium and ItsHoys: Gravimetric Determination of Aluminium in Magnesium

Rec. for Vickers Hardness Test for Copper and ItsIts Alloys: Gravimetric Determination of Zinc in Aluminum

d, Drawn and Extruded Products in Light Metals or in LightRec. for Tensile Test, of Light Metals and Their

ec. for Meth. of Mercurous Nitrate Test for Copper and ItsRec. for Bend Test for Copper and Its

Rec. for Tensile Test, of Copper and ItsRec. for Brinell Hardness Test for Copper and Its

(1971)

e Alloys (1/w Contents)/

) (1971)

m) (1970)

Alloy High Tensile Steel (1967)Alloy High Tensile Steels (1967)Alloy High Tensile Types (1967)Alloy High Tensile Types (1967)Alloy High Tensile Types (1967)Alloy Ingots for Casting Purposes (1959)Alloy Ingots (1963)Alloy Rolled Flat Products (Thickness Less Than 2.5 mmAlloy Sand Castings Reference Test Bar (1972)Alloy Sand Castings: Reference Test Bar (1972)Alloy Sections for Marine Use (1970) /Ding Details-DAlloy Sheet and Strip of Thickness Between 0.2 mm (0.00Alloy SteelsCode of Symbols for Identification (1973Alloy Stranded Conductors (Aluminum Magnesium Silicon TAlloy Tubes of Circular Section Flattening Test (1971Alloy Tubes of Circular Section (1964)Alloy Tubes (1961)Alloy Tubes (1969)Alloy Tubes (1969)Alloy Tubes (1969)Alloy Wire (1964)Alloy Wire (1964)Alloy Wire (1969)Alloy Wire (1969)Alloy Wires (1969)Alloy (Content Greater Than or Equal to 0.50%) (1968)Alloy (1970)

Alloy (1972)Alloy, and Free Cutting Steels-Part 10: Wrought NitriAlloy, and Free Cutting SteelsPart 11: Wrought CaseAlloy, and Free Cutting Steels Part 12: Flame and IndAlloy, and Free Cutting Steels Part 1: Quenched and TAlloy, and Free Cutting Steels Part 2: Wrought, QuencAlloy, and Free Cutting Steels Part 3: Wrought QuenchAlloy, and Free Cutting Steels Part 5: Wrought QuenchAlloy, and Free Cutting SteelsPart 6: Wrought QuenchAlloy, and Free Cutting Steels Part 8: Wrought QuenchAlloy, and Free Cutting Steels Part 9: Wrought Free CAlloy, Used for Electronic and Telecommunication EquipmAlloyed Coppers (1971)Alloys-Brinell Hardness Test (1971)AlloysCheck of Continuity of Thin Coatings-CopperAlloysChemical Composition (Per Cent) (1971)Alloys-Code of Designation-Part II: of Tempers (197AlloysCode of Designation-Part I: of Materials (19AlloysCode of Designation (1971)AlloysComplexometric Determination of Magnesium (197Alloys Determination of Containing Zirconium, RareAlloys Determination of Chromium SpectrophotometricAlloys Determination of Copper by Electrolysis (1971)Alloys Determination of Insoluble Zirconium AlizarinAlloys-Determination of Rare Earths-Gravimetric MetAlloys Determination of SiliconSpectrophotometric

Alloys Determination of Soluble Zirconium (Alizarin SAlloys Determination of the Light Fastness of ColoredAlloys Determination of Titanium Spectrophotometric MAlloys Determination of Zinc Volumetric Meth. (1970Alloys Determination of Zinc-Volumetric Meth. (1970Alloys Electrolytic Determination in Unalloyed Type CAlloys-Electrolytic Determination in Wrought and CastAlloys Estimation of the Loss of Absorptive Power byAlloys-Insulation Check by Measurement of Breakdown PAlloys-Measurement of the Mass of the Oxide CoatingsAlloys Measurement of Thickness of Oxide Coatings

N

Alloys Sampling of Copper Refinery Shapes (1971)Alloys-Sand Cast Test PiecesMechanical PropertiesAlloys-Selection of Specimens and Test Pieces (1971)Alloys Shear Test for Rivet Wire and Rivets (1971)Alloys-Spectrophotometric Determination of Iron in ThAlloys-Spectrophotometric Determination of Nickel (LoAlloys-Spectrophotometric Determination of Tin (1970)AlloysTemper Designation (1971)Alloys- Vickers Hardness Test (Loads from 1 to 100 kgfAlloys- Volumetric Determination of Aluminium (AluminuAlloys and Magnesium and Its Alloys 5 to 50 mm Thick (1Alloys for Use in Shipbuilding (1969)Alloys 5 to 50 mm Thick (1972) /Welded Butt Joints forAlloys (Aluminum Content Between 1.5 and 12.0%) (1968)Alloys (Test Loads from 2.5 to 50 kgf) (1964)Alloys (Zinc Content Between 0.50 and 6.5%) (1968) /NdAlloys (1960) /Shipbuilding Details-Marking of RolleAlloys (1961)

Alloys (1961)

Alloys (1964)

Alloys (1964)

Alloys (1964)

/. for

ISO 547ISO 598ISO 636ISO 635ISO 637ISO 122ISO 301ISO 1555ISO 2377ISO 2379ISO 1175ISO 954ISO 2560IEC 208ISO 1556ISO 401ISO 195ISO 952ISO 953ISO 955ISO 397ISO 402ISO 957ISO 958ISO 956ISO 796ISO 1562ISO 2179ISO 683/XISO 683/XIISO 683/X11ISO 683/1ISO 683/11ISO 683/IIIISO 683/VISO 683/VIISO zrrtl (17111683/VIIIIsU 683/IXIEC 329ISO 1336ISO 191ISO 2085ISO 209ISO 1190/11ISO 1190/1ISO 2092ISO 2297ISO 2353ISO 2298ISO 1976ISO 2354ISO 2355ISO 1975ISO 1178ISO 2135ISO 1118ISO 1783ISO 1784ISO 1553ISO 1554ISO 2143ISO 2376ISO 2106ISO 2128ISO 1811ISO 2147ISO 2142ISO 2101ISO 1812ISO 1810ISO 1570ISO 2107ISO 192ISO 1169ISO 2437ISO 1156ISO 2437ISO 791ISO 399ISO 798ISO 154ISO 190ISO 196ISO 398ISO 400ISO 403



Rec. for Classification of Copper NickelKec. for Classification of Copper Nickel Zinc

composition of Wrought Magnesium Aluminium (Aluminum) Zincrty Limits for Rivet Stock of Aluminium (Aluminum) and Itslimits for Rolled Products of Aluminium (Aluminum) and Its

Rec. for Special Wrought CopperRec. for Cast Copper

mits for Extruded Products of Aluminium (Aluminum) and Itss Alloys Spectrophotometric Determination of Iron in the

ys Electrolytic Determination in Wrought and Cast-Copperotometric Determination of Nickel {Low Contents) in Copper

um Alloy / Rec. for Chemical Analysis of Aluminum and Itssium AH/ Rec. for Chemical Analysis of Magnesium and Its

rec. for Chemical Analysis of Aluminium (Aluminum) and ItsHoys (Z/ Rec. for Chemical Analysis of Aluminium and Itsdrazide / Rec. for Chemical Analysis of Magnesium and Its

rec. for Chemical Analysis of Aluminium (Aluminum) and Itshroline / Rec. for Chemical Analysis of Magnesium and Itshroline / Rec. for Chemical Analysis of Aluminium and Itss B/ Rec. for Chemical Analysis of Aluminium and Aluminumte Meth./ Rec. for Chemical Analysis of Magnesium and Itste Meth./ Rec. for Chemical Analysis of Magnesium and Its

rec. for Chemical Analysis of Aluminium (Aluminum) and Itsin That Containing C/ Std. for Chemical Analysis of Zinctween 0./ Rec. for Chemical Analysis of Magnesium and Its

Rec. for Chemical Analysis of Zinc and ItsRec. for Spices and Condiments: Pimento

Rec. for Alpha, Beta andRec. for Glossary of Gears Geometrical Definitions -

Rec. forRec. for Basic Arrangement for the

Rec. for High Voltage

c/

69)

nds (1971)uction (1971)

itions (1971)

Given with Enquiries Tenders and /

ection of (For Service) (1971)

tests (1972)

ing Switches (1961)

Rec. for High VoltageRec. for High VoltageRec. for High VoltageRec. for High VoltageRec. for High VoltageRec. for Symbols for

Rec. for

Rec. forRec. for Class 1 .0Rec. for Class 0.5

Rec. for Bushings forper Insulated Metal Sheathed Cables: Nondraining Types foron Impregnated Paper Insulated Metal Sheathed Cables: fornd Their Accessories: Paper Insulated, Metal Sheathed, ford Gas Pressure Cables and Their Accessories: Internal, ford Gas Pressure Cables and Their Accessories: External, forWinding Resistance of an a.c. Machine During Operation at

nium (Aluminum) Oxide Primarily Used for the Production of. for Aluminium Oxide Primarily Used for the Production ofc. for General Purpose Electrical Cables with Aluminium or

Rec. for Composition of Wrought Products of Aluminium and(1971) Rec. for Aluminium and

Rec. for Shipbuilding DetailsWroughtinium and Its Alloys: Gravimetric Determination of Zinc in

(Contents B/ Rec. for Chemical Analysis of Aluminium andRec. for Flattening Test on

Rec. for Simple Torsion Test forRec. for Wrapping Test for

Rec. for Chemical Analysis ofRec. for Wrought

Rec. for Chemical Analysis ofravimetric Determination of Aluminium in Magnesium AlloysStd. for Aluminium Terminal Ends for Crimping to Aircraft

orrosion (1971) Rec. for Metal Spraying of Zinc andRec. for Aluminium AUoy Stranded Conductors

r Meth. of Test for General Purpose Electrical Cables withminiumDetermination of Silica ContentSpec/ Rec. forminiumDetermination of Sodium Content Flam/ Rec. forminium-Determination of Calcium ContentAto/ Rec. forminiumDetermination of Zinc Atomic Absorpt/ Rec. forminium-Determination of Zinc Content-Pan Ph/ Rec. forminium-Preparation of Sample Solution for Ana/ Rec. for

Determination of the Light Fastness of Colored Anodisedium Silicon Type (1959) Rec. for Heat Treated Aluminium

Rec. for Composition of AluminiumRec. for Composition of Aluminium

72) Std. for Aluminiumum Silico/ Rec. for an International Spec, for Aluminium

Rec. for Aluminium) Std. for Aluminium

etails-Dimensions and Sectional Properties of Aluminiumroperties (1971) Rec. for Aluminium

or Surface Treatment of MetalsAnodisation of Aluminiumof Magnesium (/ Std. for Chemical Analysis of Aluminium

um Spectrophotometric Meth/and Test Pieces (1971)copper in Aluminium Alloy /

Alloys (1965)

Alloys (1965)Alloys (1966)Alloys (1968)

Alloys (1968)Alloys (1971)Alloys (1971)Alloys (1971)Alloys (1971)Alloys (1971)

Alloys (1971)

Alloys:

AUoys:

Rec. forRec. for Mechanical Prope

Rec. for Mechanical Property

Rec. for Mechanical Property Li/ for Chemical Analysis of Copper and It/Hemical Analysis of Copper and Its Alio

/Is of Copper and Its AlloysSpectrophElectrolytic Determination of Copper in AluminiGravimetric Determination of Aluminium in Magne

Alloys: Gravimetric Determination of Silicon (Content GAlloys: Gravimetric Determination of Zinc in Aluminum aAlloys: Photometric Determination of Copper (OxalyldihyAlloys: Photometric Determination of Copper (OxalyldihyAlloys: Photometric Determination of Iron (OrthophenantAlloys: Photometric Determination of Iron (OrthophenantAlloys: Photometric Determination of Manganese (ContentAUoys: Photometric Determination of Manganese: PeriodaAUoys: Photometric Determination of Manganese: PeriodaAlloys: Photometric Determination of Silicon (Content BAUoys: Polarographic Determination of Lead and CadmiumAlloys: Polarographic Determination of Zinc (Content BeAUoys: Spectrophotometric Determination of Iron (1969)(Allspice) Whole and Ground; Spec. (1969)Alpha-Beta Contamination Meters and Monitors (1970)Alphabetical Indexes of Equivalent Terms (English, FrenAlphanumeric Character Sets for Optical Recognition (19Alphanumeric Section of Keyboards Operated with Both HaAlternating Current Circuit Breakers: Design and ConstrAlternating Current Circuit Breakers: General and DefinAlternating Current Circuit Breakers: Information to BeAlternating Current Circuit Breakers: Rating (1971)Alternating Current Circuit Breakers: Rules for the SelAlternating Current Circuit Breakers: Type and RoutineAlternating Current Electricity Meters (1972)Alternating Current Isolators (Disconnectors) and EarthAlternating Current Watthour Meters (1960)Alternating Current Watthour Meters (1964)Alternating Current Watthour Meters (1968)Alternating Voltages Above 1,000 V (1962)Alternating Voltages from 10 kV Up to and Including 33Alternating Voltages from 10 kV Up to and Including 66Alternating Voltages Up to 275 kV (1963) /Ure Cables aAlternating Voltages Up to 275 kV (1967) /II Filled anAlternating Voltages Up to 275 kV (1967) /II Filled anAlternative Voltage (1969) /Ec. for Measurement of theAluminium: Preparation of Sample Solution for AnalysisAluminum-Determination of Calcium Content SpectrophAluminum Alloy Conductors for Aircraft (1969) ReAluminum AlloysChemical Composition (Per Cent) (1971Aluminum AUoysShear Test for Rivet Wire and RivetsAluminum AUoys for Use in Shipbuilding (1969)Aluminum AUoys (Zinc Content Between 0.50 and 6.5%) (1Aluminum Alloys: Photometric Determination of ManganeseAluminum and Aluminium Alloy Tubes (1969)Aluminum and Aluminium Alloy Wire (1969)Aluminum and Aluminium Alloy Wire (1969)Aluminum and Aluminium Alloys Determination of TitaniAluminum and Aluminium Alloys Selection of SpecimensAluminum and Its Alloys: Electrolytic Determination of(Aluminum Content Between 1.5 and 12.0%) (1968) ys: GAluminum Electrical Cables (1973)Aluminum for the Protection of Iron and Steel Against C(Aluminum Magnesium Silicon Type) (1966)Aluminum or Aluminium Alloy Conductors for Aircraft (19Aluminum Oxide Primarily Used for the Production of AluAluminum Oxide Primarily Used for the Production of AluAluminum Oxide Primarily Used for the Production of AluAluminum Oxide Primarily Used for the Production of AluAluminum Oxide Primarily Used for the Production of AluAluminum Oxide Primarily Used for the Production of AluAluminum (1971) /Odisation of Aluminium and Its AUoysAluminum) Alloy Busbar Material of the Aluminium MagnesAluminum) Alloy Castings (Complement to R164) (1961)Aluminum) AUoy Castings (1960)Aluminum) Alloy Chill Castings Reference Test Bar (19Aluminum) AUoy Conductor Wire of the Aluminium MagnesiAluminum) Alloy Conductors, Steel Reinforced (1966)Aluminum) Alloy Sand Castings: Reference Test Bar (1972Aluminum) AUoy Sections for Marine Use (1970) /Ding DAluminum) AUoysSand Cast Test PiecesMechanical PAluminum) and Its AlloysCheck of Continuity of ThinAluminum) and Its AlloysComplexometric Determination

ISO 429ISO 430ISO 503ISO 828ISO 826ISO 1187ISO 1338ISO 827ISO 1812ISO 1554ISO 1810ISO 796ISO 791ISO 797ISO 798ISO 794ISO 795ISO 792ISO 793ISO 886ISO 809ISO 810ISO 808ISO 2576ISO 807ISO 1055ISO 973IEC 325ISO 1122/1ISO 1073ISO 2126IEC 56-3IEC 56-1IEC 56-6IEC 56-2IEC 56-5IEC 56-4IEC 387IEC 129IEC 43IEC 170IEC 280IEC 137IEC 55-2IEC 55-1IEC 141-1IEC 141-2IEC 141-3IEC 279ISO 804ISO 2070ISO 1076ISO 209ISO 2101ISO 1156ISO 798ISO 886ISO 955ISO 957ISO 958ISO 1118ISO 2142ISO 796ISO 791ISO 1965ISO 2063IEC 208ISO 1468ISO 1232ISO 1617ISO 2069ISO 2071ISO 2072ISO 2073ISO 2135IEC 114ISO 208ISO 164ISO 2378IEC 104IEC 210ISO 2379ISO 1175ISO 2147ISO 2085ISO 2297



metric Meth. (1/ Rec. for Chemical Analysis of Aluminium (Aluminum) and Its Alloys-Determination of Zinc-Volu ISO 1784or Surface Treatment of Metals- Anodisation of Aluminium (Aluminum) and Its Alloys-Estimation of the Loss of Ab ISO 2143

en/ Std. for Anodization (Anodic Oxidation) of Aluminium (Aluminum) and Its Alloys-Insulation Check by Measurem ISO 2376t of Metals- Anodisation (Anodic Oxidation) of Aluminium (Aluminum) and Its Alloys-Measurement of the Mass of T ISO 2106t of Metals- Anodisation (Anodic Oxidation) of Aluminium (Aluminum) and Its Alloys-Measurement of Thickness of ISO 2128

ray Inspection of Fusion Welded Butt Joints for Aluminium (Aluminum) and Its Alloys and Magnesium and Its Alloys 5 ISO 2437r Mechanical Property Limits for Rivet Stock of Aluminium (Aluminum) and Its Alloys (1968) Rec. Fo ISO 828chanical Property Limits for Rolled Products of Aluminium (Aluminum) and Its Alloys (1968) Rec. for Me ISO 826anical Property Limits for Extruded Products of Aluminium (Aluminum) and Its Alloys (1971) Rec. for Mech ISO 827

silicon (Conten/ Rec. for Chemical Analysis of Aluminium (Aluminum) and Its Alloys: Gravimetric Determination of ISO 797copper (Oxalyld/ Rec. for Chemical Analysis of Aluminium (Aluminum) and Its Alloys: Photometric Determination of ISO 795silicon (Conten/ Rec. for Chemical Analysis of Aluminium (Aluminum) and Its Alloys: Photometric Determination of ISO 808

Rec. for Classification of Aluminium (Aluminum) Bronzes and Special Types (1965) ISO 428Rec. for Commercial Purity Aluminium (Aluminum) Busbar Material (1958) IEC 105

Rec. for Aluminium (Aluminum) Conductors, Steel Reinforced (1966) IEC 209th. (197/ Std. for Iron Ores: Determination of Aluminium (Aluminum) Contenl-Oxine Gravimetric and Volumetric Me ISO 2771