ind-gefco, inc. 7/15/2015€¦ · ind-gefco, inc. 7/15/2015 general terms and conditions of sale -...

IND-GEFCO, INC. 7/15/2015

GENERAL TERMS AND CONDITIONS OF SALE - GEFCOWEDNESDAY, JULY 15, 2015

ORDER OF SALE:ITEMS WILL BE SOLD IN NUMERICAL ORDER. It will be at the discretion of the Auctioneer to sell items out of sequence, divide orconsolidate lots.

REGISTRATION:By registering as a Bidder and/or participating as a Bidder at the auction sale Bidder is bound by the Terms & Conditions set forth hereinand announced on the day of sale. Bidder agrees that such Terms & Conditions are binding on the Bidder whether or not the Bidder waspresent and/or heard such announcements. Bidder agrees that Auctioneer is in control of the conduct of the auction sale and has the rightto reject any bid by any Bidder at the auction sale. It is at the sole discretion of the Auctioneer as to whether or not any bid is in conformitywith the Terms & Conditions of the auction sale. Furthermore, Auctioneer may refuse to accept a bid whenever, in his sole discretion bid isnot in good faith or Bidder appears to be under the influence or have some incapacity at time of sale. ALL PERSONS must be registered tobid and will be identified by number to facilitate the speed of the auction.

TIE -BIDS Auctioneer will rule in case of "TIE" Bids. In the event of a TIE BID or any uncertainty as to offered last and highest bid the Auctioneer hasa right to resolve any such at the time by accepting the Bid that the Auctioneer believes is in good faith and was the last, highest and bestbid. Auctioneer may open the bidding between the parties at his discretion and option and such decision will be final and binding onaffected parties.

SALES TAX:Sales tax will be collected if applicable. Dealers can present Resale Certificates.

REMOVAL:

Auctioneer and Seller assume no responsibility for items left on sale site at sale's conclusion. Buyer is URGED to REMOVE ITEMS as soonas possible or to self insure for potential loss. Removal will be until 5:00 pm today or 1-hour following the sale, whichever is later.Additional Removal: 8:00AM-4:00PM Thursday, July 16th, Friday, July 17th and Monday, July 20th. From Tuesday, July 21 throughThursday July 30th removal will be BY APPOINTMENT ONLY at both locations. ALL ITEMS MUST BE REMOVED BY July 30th at bothlocations "NO EXCEPTIONS".

Two Locations:9600 Corporate Park Drive, Loudon, TN 377742215 S. Van Buren Street, Enid, OK 73703

NOTICE TO INSPECT "AS_IS WHERE IS":Auctioneer presents all information in brochures, catalogs, and other advertisements from sources believed to be accurate. These arerepresentations of the Auctioneer. Prospective Buyers should inspect all items to their own satisfaction. "BUYER BEWARE" Items areavailable for public inspection and the foregoing are merely guides. ALL ITEMS are being sold AS IS-WHERE-IS with no warranty orguarantee-actual or implied.

TERMS:A 15% Buyer's Premium will be collected, an additional 18% Buyer's Premium for Online Bidders. Payment must be made in full day of saleby CASH, WIRE TRANSFER, CASHIER'S CHECK or COMPANY CHECK if Accompanied by BANK LETTER of GUARANTY, CREDIT


Page: 2Furrow Auction Company

CARDS to include: MASTERCARD or VISA ONLY. After an item has been sold, it becomes the sole responsibility of the Purchaser. Noitems can be removed until complete settlement has been made. Settlement can be made at any time during the sale. Settlement must bemade today and an invoice with the paid item receipt will be supplied to the Purchaser upon settlement. The PAID receipt ticket will berequired in order to remove items from the site. All checks should be made payable to Furrow Auction Company. "ALL SALES ARE FINAL"ONLINE BIDDING TERMS: Online Bidders should review the "Online Terms & Conditions" in detail and will be held to those terms.SAFETY DEVICES: Items purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards as required by law. It isPurchaser's responsibility that items purchased be so equipped and safeguarded to OSHA and any other requirement before placing itemsinto operation.All Riggers, Contractors or Buyer's conducting specialized removal must provide a "Certificate of Insurance" with a minimum $1 million totalliability and naming Furrow Auction Company and Seller as "LOSS PAYEE". Qualified and Insured Riggers must perform removal of itemsthat may affect the Real Property. Damage responsibility will be the responsibility of the Riggers and Buyers of item removed. Rigging andRemoval is the responsibility of the Buyer. All removal activity must be in accordance with OSHA Guidelines and Standards. Removal maybegin when auction has concluded and complete payment has been made.

Onsite & Approved Rigger: DACCO Mechanical - Dave Cook 865-224-1081Onsite & Approved Rigger for Enid, OK site: Industrial Equipment Solutions - Howard - 580-242-6301. www.iesok.com.

OUR STAFF

SAM FURROW - OWNER/AUCTIONEERBLAKE WILSON - VP INDUSTRIAL DIVISION, AUCTIONEERWIL WAUGH - AUCTIONEER/PROJECT MGRYOU CAN REACH US AT OUR EMAIL ADDRESS: [email protected]

VISIT WWW.FURROW.COM TO VIEW ALL UPCOMING AUCTIONS. OUR FAX NUMBER IS 865 525-4179.

1 (3) Mechanics Creepers

2 (3) Mechanics Creepers

3 (6) Pneumatic Hammers

4 (5) Pneumatic Tools,2 Ratchets,2 Grinders, Hammer



5 (6) Pneumatic impact drivers

6 (6) 1/2" Pneumatic Impact Wrenches










14 (4) Pneumatic Grinders 7 1/2"

15 Yard Machine 3.5hp Gas Edger

16 Tool Box with Contents, Wrenches, Screw Drivers, Chisels etc.

17 10 Ton Hyd. Floor Jack

18 Hougen Rotabroach Magnetic Base

19 Dana T-462 Portable Hose Crimper

20 Gates Model 205 Hose Saw



21 Enerpac 1.5hp Hyd Power Unit

22 Enerpac Foot Pedal and 10 ton Ram

23 (2) Metal Work Tables on Casters (1) 48'X72", (1) 42"X96"

24 Portapower Kit

25 Ram Power Portapower Kit

26 Greenlee 777 Portable Hydraulic Bender

27 Ridgid 1822 Pipe Threader w/ Die, Cutter and Reamer

28 Ridgid 1/8" to 6" Tristand



29 Ridgid 1/8" to 5" Tristand

30 HEM-Saw Mdl. 1200A Automatic Horizontal Bandsaw

31 HEM-Saw Mdl. 1200A Automatic Horizontal Bandsaw S/N 104180

32 (4) Boxes Bandsaw Blades, (3) 15'x1 1/4" 042 6/4, (1) 14'6"x 1" 035 6/4

33 Barber-Coleman 16-16 Gear Hobber S/N 2907

34 Sector Technology 72"X120" Burner Table w/ Torch and Sector Controls

35 Fellows Mdl 6 Gear Shaper 18" Max Diameter 5" Face

36 2005 Gates GC32-XD Hyd. Hose Crimper S/N SA0114F05 w/Tooling



37 Gates PC 707 Power Crimper w/Dies

38 Aeroquip Mdl. A Hose Crimping Machine

39 Aeroquip Mdl. A Hose Crimping Machine

40 Dies for Aeroquip Mdl. A Hose Crimpers

41 Aeroquip Mdl O Hose Cut Off Machine 3"- 48"

42 Clausing 2 Head Vertical Drill Press 24" X 72" Table

43 Panasonic PanaRobo Mdl. YA1FAR81 Welding Robot w/2 Panasonic YA1AJB21 WeldPositioners and Panasonic Dip-Pulse Mig HM500 Weld Controller

44 Panasonic HM500 Dip-Pulse Mig Welder





47 Weld Positioner Table

47A (2) Weld Jig Clamps

48 2002 Beckwood Press Company 110 Ton Hydraulic Forming Press, 4 Post






51A 2002 Beckwood Press Company 110 Ton Hydraulic Forming Press, 4 Post

52 Balliu LC 2000 Laser, Siemens Controls, PRC 3500 Laser 3500 watt, (2) 84" X 120" LoadTables

53 Koolant Koolers Mdl. HCV15, 100-2P, 15hp Chiller S/N 11239

55 Balliu LC 2000 Laser, Siemens Controls, PRC 3500 Laser 3500 watt, (2) 84" X 120" LoadTables (needs repair)

56 Koolant Koolers Mdl. HCV15, 100-2P, 15hp Chiller S/N 11238

57 Torit Mdl. DF 2-8 7.5hp Down Flow Dust Collector

58 2001 Turret Mdl. CHL26120 CNC Lathe w/ Fanuc Series O-T Controls, Heavy Duty 3 Axis,26" Swing, 120" Between Centers

59 Cabinet and contents, Tooling, Tool Holders and Cutters for Lathe



60 Giddings and Lewis Horizontal Boring Mill, Type 350T, 60" X 120" Table S/N 150-190-56

61 (2) 61" X 24" Angle Plates 90 Degree

62 (14) Cat 50 Tool Holders w Tooling Cutters Drills etc.

63 (2) 8" 3 Jaw Dividing Heads

64 End Mill Tooling

65 Carbide Inserts

66 Tapered Tool Holders w/ Tooling

67 Machine Hold Downs T-Nuts, Allthread, Bolts etc.



68 (2) Trays Large Drill Bits, Tapered and Straight Shank

69 (5) Trays Mill Cutters, Drill Bits etc.

70 No. 84 Counterbore Set

71 Machine Hold Down Set

72 (3) 10" V-blocks

73 8" Jaw Machinist Vise

74 6" Jaw Machinist Vise

75 8" Jaw Vise



76 C-clamps, hold downs Etc..

77 Metal Wood Topped Table 30X72

78 Heavy Duty Parts Shelf 78"X50"X26"

79 Heavy Duty Rack On Casters 34"X60"X14"

80 Metal Work Table 24"X60"

81 Cincinnati 9 Series Press Brake 12'X150 Ton S/N 33180, LOCATED IN ENID, OK.

82 Cincinnati Mdl. 2508 Hyd. Shear 3/8" X 8' S/N 34506, LOCATED IN ENID, OK

83 Cincinnati Mdl. 3DL12 Hyd Squaring Shear 3/8 X 12' S/N 38958, LOCATED IN ENID, OK.



84 Astec Maxi-Sneaker Trencher Plow 36 Hrs. S/N RTM-SXX86435

85 Tenant Model 7400 Ride On Sweeper

86 Hyster Model R30CH Order Picker, 3000 Lbs., S/N A186DO1933U - NEEDS BATTERY

87 Toyota Electric Forklift 2500 lb. (NEEDS BATTERY)

88 Magnetic Lift Blocks

89 O.S. Walker Model BM 55-2500 Lift Magnet

90 O.S. Walker 6000 lb. Lift Magnet

91 O.S. Walker Model BM 55-2500 Lift Magnet



92 O.S. Walker 8000 lb. Lift Magnet

93 Lift Table 36"X48"

94 Pandjiris Weld Positioner

95 Astec Underground Mud Mixer Attachment Mdl FM130

96 Walton/ Stout S.S. Portion Hopper

97 Delta 2 Bag 3 HP Dust Collector

98 Brundi Box Pallet Forks

99 Sealed Air Corporation Speedy Packer System ( Foam Packing System )



100 Uline Bagger/ labeler MDL SX

101 Alkota Electric Pressure Washer MDL 4208

102 Hydrotec Electric Pressure Washer

103 Arbor Press

104 Pexto Edger MDL 622LR

105 Pedestal Grinder

106 Bishamon Lift Table 48"X96"

107 Bishamon Lift Table 24"X42"



108 Shop Press Electric/ Hydraulic

109 Master Cut Horizontal Band Saw MDL S-12a W/Power Roller Feed

110 Roller Feed Table 18"X120"

111 Sigma 5HP Hyd Power Unit W/Impact Gun

112 Sigma 5HP Hyd Power Unit

113 Romac 10HP Hyd Power Unit

114 Rigging 6 Chains , Lift Clamps, Straps, ECT

115 A-Frame Rigging Rack



116 Rack And Contents Bar Clamps

117 Rack And Contents Custom Clamps

118 C-Clamps Various Sizes

119 Contents Rack, Bolts, Nuts, Cap Screws




123 Parts Cart on Casters 24"X60"X36"






127 Contents Parts Rack, Hose Fittings, Reducers, Elbows, 4 ways Etc..

128 Contents Parts Rack, Bolts, Washers, Clamps, Etc.

129 Contents Parts Rack, Pipe Fittings, Elbows, T's, Caps, Etc.

130 Contents Parts Rack, Filters, Door Handles, Etc..

131 Hyd Hose Fittings, Elbows, T's, Reducers, Etc..



132 Hose Fittings, Pipe fittings, Etc..





137 Contents Parts Rack, Valves, Hose fittings, Etc..

138 Contents Parts Rack, Hyd. Hose Fittings

139 Contents Parts Rack, Bolts, Washers, Etc.





142 Parts Rack On Casters 26"X48"x 78"









157 Contents Parts Rack, Bolts, Nuts, Washers, Etc..

158 Contents Parts Rack, Valves, Washers, Parts, Etc..

159 Contents Parts Rack, Bolts, Nuts, Etc..

160 Contents Parts Rack, Various Size Bolts, Nuts, Washers, Etc..

161 Contents Parts Rack, Various Size Bolts, Nuts, Washers, Etc..

162 Contents Parts Rack, Various Size Plastic Block, Etc..

163 Parts Rack, 26"X48"x 76"



164 Parts Rack, 26"X48"x 76"

165 Parts Rack, 26"X48"x 76"

166 Parts Rack, 26"X48"x 76"

167 Parts Rack, 26"X48"x 76"

168 Parts Rack, 26"X48"x 76"

169 Parts Rack, 26"X48"x 76"

170 (3) Partial Spools Parker 40/20 hose

171 (3) Partial Spools Hose, (2) 3/8", (1) 3/4"



172 (3) Spools Parker Hi Temp Hose 1", 1000 PSI

173 (4) Spools Hose (1) Parker 3/4" 4000 PSI, (1) 1/2" 3500 PSI, (1) 1/2" 350 PSI, (1) 3/8" 3000 PSI

174 (3) Spools Hose, (1) 5/8" Braided 1500PSI, (1) 1/4" 3000 PSI, (1) 1/4" 3250 PSI

175 (4) Spools Hose, (2) Parker 201-8 Braided 2000 PSI, (1) 1/2" 3500PSI, (1) 1/4"

176 (4) Spools Hose, (3) 1/4" 3250 PSI, (1) 426-6

177 (5) Spools Hose, (3) 1/2", (2) 3/4"

178 Parker Tough Cover 25mm 5000PSI

179 (3) Spools Hose, (2) 1/4" 300 PSI, (1) Goodyear Flex Wing.



180 (6) Spools Hose, 1" 4000PSI



183 Contents of Pallet Various Size Electrical Wire



186 Contents of Pallet Electrical Wire, Battery Cables

187 (3) Boxes PVC Pipe 6" and 10"



188 (2) Pallets Conduit Various Size

189 Contents of Pallet Various Size Plastic Parts Bins















218 Wire Basket

219 Metal Stackable Pallet



220 Contents of 3 Pallets Plastic Parts Bins

221 Contents of 3 Pallets Plastic Parts Bins

222 Plastic Folding Pallet/Crate












232 Metro Rack on Casters 24" X 60" X 72"

233 Metro Rack on Casters 36" X 72" X 84"

234 (9) 48" X 96" Sheets of Lexan

235 (2) Stackable Metal Pallets



236 (7) Roll Formed Sheets of Fender Material

237 Cummins 4cyl Diesel Engine

238 Torque Hub Part Number UA104555

239 (2) Sauer Danfess Mdl. 51C060 Bent Axis Variable Displacement Motors

240 Contents of Crate Pipe Fittings and Valves

241 Torque Hub Part Number F360 VSG

242 Contents of Pallet, Filters, Pulleys, ECT

243 (6) Proportioning Valves



244 Large Bearing, Gears, Splined Axles

245 Electrical Fittings and Terminals

246 Parker Hose Wrap

247 Cox Reels Hose Reel

248 Sauer/Danfoss Variable drive Motor

249 (5) Sauer/Danfoss Variable drive Motor

250 Torque Hub Mdl S12B2002K





252A (4) Hyd Cylinders

253 Sauer/Danfoss Mdl 83026756

254 (2) Variable Drive Motors

255 (2) Variable Drive Motors

256 Sauer/Danfoss Mdl 9721347

257 (5) Sauer/Danfoss Variable drive Motor (3) KVEBB0504, (1) KVEBB0704, (1) No Plate

258 (1) Section Pallet Racking 36"X96"X96"



259 (1) Section Pallet Racking 42"X102"X64"

260 Bolt Bin W/Contents Set Screws, Cap Screws, ETC

261 (2) Sections Adjustable Shelving 24"X96"X72

262 (8) Boxes (6) Washers, (2) 5/16" Single End Rod

263 (10) Boxes Threaded Rod, Handle Bar grips

264 (8) Boxes Threaded Rod , Bolts

265 (13) Boxes Hose Clamps, Bolts, Lock Nuts, Etc.

266 Contents Of Shelf Lock Washers, Bolts, Snap Rings



267 Contents of Shelf Threaded Rod, Nuts

268 Contents of Shelf Threaded Studs, Lock Flanges, Harness Clamps

269 Contents of shelf, Cap screws, Threaded Studs,

270 Contents of Shelf, Washers, Threaded Rod, Springs Etc.

271 Contents of Shelf, Retaining Rings, Pins, Etc.

272 Contents of Shelf, Washers, Pins, Hose Clamps, Pipe clamps

273 Contents of Shelf, Bolts, Pins, Washers

274 (4) Sections Adjustable Shelving, 24"X96"X84"



275 7 Drawer Locking Cabinet 24"X36"X84"

276 7 Drawer Locking Cabinet 24"X36"X84"

277 Material Cart W/Contents, Misc. Cleaning , Oil, Etc.

278 Contents of Pallet (13) Fuel Cans

279 Contents of Pallet, Air Filters, Oil Filters, (9) Oil Catch Cans

280 Contents of Pallet, Air Hose

281 Contents of Pallet, Floor Mats, Anti Fatigue Mats

282 Contents of Pallet, Hollowell Locker, Floor Cable Router



283 Contents of Pallet, Anti Fatigue Mats

284 (3) Water Coolers, Box of Hard Hats

285 (10) 5Gallon Containers Royal Purple CMT 50 Oil

286 Contents of Pallet, Brooms, Dust Pans

287 (30) Trash Cans

288 Reelcraft Hose Reel

289 (3) Carlisle 26C12.00X12 Turf Tires on Wheels

290 (3) Microwave Ovens



291 Spill Containment Pallet

292 Spanco 3 Ton 18' Span 12' Tall Jib

293 Ace 1Ton 18' Span 12' Tall Jib

294 Ace 1Ton 18' Span 12' Tall Jib

295 Flammable 2 Door Storage Cabinet 16"X42"X48"











304 Metal Welding Table W/ 6" Jaw Vise 60"X120"






308 Metal Work Table W/2 Door Cabinet 32"X72"

309 (2) Metal Work Tables 32"X72"

310 (2) Metal Framed Wood Topped Tables 28"X72"

311 Metal Welding Table W/4" Jaw Vise 60"X120"

312 Heavy Duty Metal Jig Table 60"X96"

313 (3) Angle Plates (1) 4"X8", (1) 3"X9" (1) 2.5"X7.75 "

314 (2) Angle Plates (1) 8"X18", (1) 6"X12"



315 (2) Angle Plates 6"X20"

316 Metal Welding Table 60"X96"












326 Wire or Hose Spool Rack 3 Tier 120"X60"

327 (1) Section Roller Conveyer Flow Rack 48"X48"X60"

328 (1) Section Shelving 24"X1w0"X60"

329 Custom Metal Storage Cart

330 Towable 3 Tier Cart 36"X96"



331 Towable 3 Tier Cart 36"X96"

332 Various Size All Thread

333 Metal Cart 48"X72'

334 Metal Cart 36"X72"

335 Metal Cart 24"X84"

336 (2) Metal Shop Carts 24"X48"

337 (2) Metal Shop Carts 24"X48"

338 System 20 Hydraulic Systems Condition Monitor



339 (2) Accumulator Charge Kits

340 OTC Vacuum Pump Kit

341 Pressure Gauges in 2 Boxes

342 Shimpo Digital Stroboscope, Test Equipment, Etc.

343 Metal Shop Cart 24"X48"

344 Custom Metal Rack on Casters 18"X48"

345 Custom Metal Cart 24"X48"

346 (4) Motorola Radios (1) Base, (3) Portable



347 OilCans, Caulk Guns, Etc.

348 (3) Metal Shop Carts




352 (1) Custom Metal Shop cart

353 (4) Powder Coating Carts

354 (2) Cantilever Carts 24"X34"X60"





357 (2) Rubbermaid Carts





362 (4) Paper/ Tape Reel Carts



363 (40) Cloth Material Baskets on Casters

364 AC Servo Motors, Parts for Panasonic Welding Robot

365 Panasonic Welder Parts and Accessories

366 (6) Weld Curtains

367 Contents of Pallet Weld Curtain Material

368 (4) Binzel Mig Welding Leads






372 Welding Supplies, Torch, Welding Wire, Leads, Regulators

373 Welding Cart W/ Hoses and Torch

374 Partial Box Lincoln Superarc .045" L-59 Welding Wire

375 Box Lincoln Superarc .035 L-59 Welding Wire 500lbs Approx.

376 Box Lincoln Superarc .035 L-59 Welding Wire 500lbs Approx.

377 Thermal Transfer MDL AO-40 Heat Exchanger 280/460 Volt





380 Young MDL OCS 1000 Cat Heat Exchanger 15HP 280/460 Volt

381 Thermal Transfer MDL AOL-725-5 Heat Exchanger 280/460 Volt

382 Warehouse Steps 10'











391 (3) Sets 3' Metal Steps

392 (3) Sets Metal Steps (2) 3' (1) 2'

393 (3) Sets Metal Steps (1) 4' (1) 2' (1) 3'

394 (3) 2 Wheeled Dollies



395 (2) Pedestal Fans 24"

396 (2) Pedestal Fans (1) 30", (1) 24"






402 (3) Fans



424 Double Sided A-Frame Parts Cart, 54" x 36" x 60"




428 Parts Cart 24" x 36" x 60"

429 Parts Cart 24" x 36" x 60"

430 Parts Cart 24" x 36" x 60"

431 Parts Cart 24" x 36" x 60"



432 (1) Section Pallet Racking 36" x 126" x 120"

433 (1) Section Pallet Racking 36" x 120" x 240"

434 Parts on Shelving, Bolts, Nuts, Washers, Screws

435 Parts on Shelving, Bolts, Nuts, Washers, Screws

436 Parts on Shelving, Pipe Fittings and Hose Fittings, Elbows, Nipples and Reducers

437 Parts on Shelving, Pipe Fittings and Hose Fittings, Elbows, Nipples and Reducers

438 Parts on Shelving, Pipe Fittings, Bolts, Nuts, Cap Screws

439 Parts on Shelving, Bolts, Nuts, Clamps, Flanges



440 Wire Parts Shelve 24" x 120" x 56'

441 Wire Parts Shelve, 24" x 120" x 80'






452 (1) Section Metro Shelving 36" x 72" x 84"



453 (1) Section Metro Shelving 36" x 72" x 84"

454 2 Yard Dump Hopper


456 1.5 Yard Dump Hopper

457 1.5 Yard Dump Hopper



460 Orange Box Dump Hopper



461 (20) Custom Tool Racks

462 (2) 50,000lb Screw Jacks

463 (3) Screw Jacks

464 (3) Screw Jacks

465 (3) Pipe Jacks

466 (4) Pipe Jacks

467 (3) Screw Jacks

468 (3) Pipe Roller Stands



469 (3) Pipe Jacks

470 (5) Jack Stands

471 Contents of Pallet (6) Manual Barrel Pumps, (2) Electric Pumps

472 (1) Section of Pallet Racking 48" X 132" X 48"

473 (2) Skate Conveyor Tables (1) 62" X48", (1) 38" X 24"

474 Metal Welding Table 48" X 120"

475 Metal Work Table 24" X 72"

476 (3) Metal Work Tables (1) 48" X 48", (1) 24" X 36", (1) 18" X 18"



477 (4) Metal Work Tables (3) 48" X 48", (1) 24" X 36"

478 Test Cabinet on Casters w/Contents Torque Wrench and Impact Sockets


480 Metal 2 Door Storage Cabinet 24" X 48" X 68"







485 Metal Cabinet 24" X 48" X72"


487 (2) Metal Work Tables 36" X 48"

488 (2) Metal Work Tables 36" X 48"

489 (1) Metro Shelf on Casters 24" X 60" X 66"

490 (2) Metal Foreman Work Stations

491 Lighted Metal Framed Wood Topped Work Table 28" X 60"

492 Rubbermaid Work Table 24" X 48", (2) Metal Work Tables 24" X 36"



493 (3) Hanging Plan Files on Casters

494 (5) 4 Drawer Metal File Cabinets




498 (3) Custom Cabinets on Casters

499 (5) Pallets of Scrap Metal

500 (3) Metal 2 Door Storage Cabinets, 18" X 36" X 78"



501 (4) Metal 2 Door Storage Cabinets, 18" X 36" X 78"

502 (3) 6 door Lockers, (2) Adjustable Metal Shelves

503 Tennant Castex Mdl. 607434 Floor Maintainer

504 (4) Wet Dry Vacuums

505 (4) Wet Dry Vacuums

506 (3) Sets of Lockers, (2) 6 Door, (1) 4 Door

507 (6) Metal 2 Door Storage Cabinets

508 (12) Task Arm Chairs



509 (3) Brake Stools, (3) Drafting Stools

ind-gefco, inc. 7/15/2015€¦ · ind-gefco, inc. 7/15/2015 general terms and conditions of sale -...

Documents