inclinometer system - tritech · 2020-03-22 · inclinometer / plumbline inclinometer system model...
TRANSCRIPT
Inclinometer / Plumbline
Inclinometer SystemModel No. TES-AN-25M
Product Description
TES-AN-25M vertical inclinometer system is used to measure lateral movement and deformation of earth works or a
structure. It provides magnitude of inclination or tilt and its variation with time in structures like retaining/diaphragm
walls, piles etc. TES-AN-25/M-H horizontal inclinometer system, provides signi!cant quantitative data on
magnitude of settlement/heave of foundations and its variation with time. It also provides the pattern of deformation,
zones of potential danger and the e"ectiveness of construction control measures undertaken. The inclinometer system
basically consists of inclinometer casings with couplings, probe with operating cable and datalogger. Accessories like
dummy probe, calibration check jig, cable lowering bracket are available on demand.
Speci�cations
System accuracy ± 6 mm/30 m
Vertical Inclinometer ProbeModel No. TES-AN-25/2M
Product Description
TES-AN-25/2M consists of two precision accelerometers inside a
waterproof stainless steel housing, !tted with two pairs of pivoted
sprung wheels. The spring loaded wheels help to position the probe
centrally inside the gage well at any required depth. A six pin
connector is provided for connection to the cable. Operating cable
graduated at every 0.5 m includes a high tensile straining member and
is supplied with a easy to carry reel.
Vertical probe
Measuring range
Resolution
Temperature limit
Dist. between wheels
Dimensions
± 15˚ of vertical
± 30˚ , ± 50˚ optional
± 0.025 mm/500 mm
0 to 80˚C
500 mm
32 mm x 700 mm long
Tritech Instruments Pte Ltd
31 Changi South Avenue 2, Presscrete Building, #02-01, Singapore 486478
Tel: +65 65465965 Fax:+65 65466527 Email: [email protected] www.tritech.com.sg
lateral movement and deformation of earth works or a lateral movement and deformation of earth works or a
e. It provides magnitude of inclination or tilt and its variation with time in structures like retaining/diaphragm e. It provides magnitude of inclination or tilt and its variation with time in structures like retaining/diaphragm
provides signi!cant quantitative data on provides signi!cant quantitative data on
ve of foundations and its variation with time. It also provides the pattern of deformation, ve of foundations and its variation with time. It also provides the pattern of deformation,
zones of potential danger and the e"ectiveness of construction control measures undertaken. The inclinometer system zones of potential danger and the e"ectiveness of construction control measures undertaken. The inclinometer system
basically consists of inclinometer casings with couplings, probe with operating cable and datalogger. Accessories like basically consists of inclinometer casings with couplings, probe with operating cable and datalogger. Accessories like
dummy probe, calibration check jig, cable lowering bracket are available on demand.dummy probe, calibration check jig, cable lowering bracket are available on demand.
± 6 mm/30 m± 6 mm/30 m
Vertical Inclinometer ProbeVertical Inclinometer Probe
TES-AN-25/2M consists of two precision accelerometers inside a TES-AN-25/2M consists of two precision accelerometers inside a
waterproof stainless steel housing, !tted with two pairs of pivoted waterproof stainless steel housing, !tted with two pairs of pivoted
sprung wheels. The spring loaded wheels help tosprung wheels. The spring loaded wheels help to position the probe position the probe
any required depth. A six pin any required depth. A six pin
connection to the cable. Operating cable connection to the cable. Operating cable
graduated at every 0.5 m includes a high tensile straining member and graduated at every 0.5 m includes a high tensile straining member and
Measuring rangeMeasuring range
Inclinometer / Plumbline
Horizontal Inclinometer ProbeModel No. TES-AN-25/2M-H
Product Description
TES-AN-25/2M-H horizontal inclinometer probe is designed to take
measurement within horizontally installed inclinometer casing. It is
biaxial and is !tted with two pairs of pivoted sprung wheels which can
freely rotate on individual bearings. The rear end of probe has provision
to !x an eye bolt used to connect the pull cable when taking readings.
Inclinometer DataloggerModel No. TES-DI-53 INS
Product Description
The data logger is housed in a rugged weather proof
enclosure. It can store readings with date and time. It is
battery operated with an easy to read display. It is supplied
complete with software to transfer the data to a PC for further
processing or for archive purposes.
Horizontal probe
Measuring range
Other speci�cations are same as TES-AN-25/2M vertical inclinometer probe
± 15˚ to horizontal
Datalogger
Display
Resolution
Range
Operating temp. range
LCD
0.0001 V @ 2 V fs range
± 2 V, ± 4 V, ± 6 V (factory con!gured)
-10 to 50˚C
Tritech Instruments Pte Ltd
31 Changi South Avenue 2, Presscrete Building, #02-01, Singapore 486478
Tel: +65 65465965 Fax:+65 65466527 Email: [email protected] www.tritech.com.sg
The data logger is housed in a rugged weather proof The data logger is housed in a rugged weather proof
enclosure. It can store readings with date and time. It is enclosure. It can store readings with date and time. It is
battery operated with an easy to read display. It is supplied battery operated with an easy to read display. It is supplied
complete with software to transfer the data to a PC for further complete with software to transfer the data to a PC for further
LCDLCD
0.0001
± 2
Inclinometer / Plumbline
Casing and FittingsModel No. TES-AN-25/1
Product Description
The inclinometer casings may be installed in a borehole, embedded in
!ll or concrete during a construction or !xed to the face of a completed
structure. These are self aligning ABS casings with longitudinal keyways
at 90° for probe orientation. The casings and couplings (!xed or
telescopic) are joined together with pop-rivets. Mastic tape is used over
the joints to make a waterproof joint.
Casing & couplings
Casing
Fixed coupling
Telescopic coupling
End caps
ABS, 70 mm o.d., 58 mm i.d., 3 m long
ABS, 77 mm o.d., 160 mm long
ABS, 77 mm o.d., 400 mm long, 150 mm
displacement range
ABS
GTILTProduct Description
GTILT software is designed to handle large or small volumes of
data from TES-DI-53 INS inclinometer datalogger. It is suitable for
plotting cumulative displacement, incremental displacement
and absolute position against depth or elevation. It plots displacement,
shear strain, rate of displacement and rate of shear strain against time.
All plots are available in the inclinometer groove directions or at a skew
angle. Checksums can be viewed in histogram form, allowing an
immediate quantitative assessment of the quality of each datasheet.
Top-down plots can incorporate independent surveys of surface
movement. Lines, polylines and text can be drawn on the plots to show
straitigraphy, piles, tunnels, excavations and so on, with user-de!nable
point sizes and colors.
Tritech Instruments Pte Ltd
31 Changi South Avenue 2, Presscrete Building, #02-01, Singapore 486478
Tel: +65 65465965 Fax:+65 65466527 Email: [email protected] www.tritech.com.sg
ABS, 70 mm o.d., 58 mm i.d., 3 m longABS, 70 mm o.d., 58 mm i.d., 3 m long
ABS, 77 mm o.d., 160 mm longABS, 77 mm o.d., 160 mm long
ABS, 77 mm o.d., 400 mm long, 150 mm ABS, 77 mm o.d., 400 mm long, 150 mm
displacement rangedisplacement range
ABSABS
GTILT software is designed to handle large or small GTILT software is designed to handle large or small volumes of volumes of
datalogger. datalogger. It is suitable for It is suitable for
incremental displacement incremental displacement
absolute position against depth or elevation. It plots displacement, absolute position against depth or elevation. It plots displacement,
rate of displacement and rate of shear strain against time. rate of displacement and rate of shear strain against time.
All plots are available in the inclinometer groove directions or at a skew All plots are available in the inclinometer groove directions or at a skew
. Checksums can be viewed in histogram form, allowing an . Checksums can be viewed in histogram form, allowing an
iate quantitative assessment of the quality of each datasheet. iate quantitative assessment of the quality of each datasheet.
Top-down plots can incorporate independent surveys of surface Top-down plots can incorporate independent surveys of surface
movement. Lines, polylines and text can be drawn on the plots to show movement. Lines, polylines and text can be drawn on the plots to show
raphy, piles, tunnels, excavations and so on, with user-de!nable raphy, piles, tunnels, excavations and so on, with user-de!nable
Inclinometer / Plumbline
Vertical In-place Inclinometer SystemModel No. TES-AN-51M
Product Description
ELike model TES-AN-25, TES-AN-51M is used to measure lateral movement and deformations of earth works or a structure, but in this system the probe is left inside the casing for real time monitoring. The in-place sensor probe is !tted with a pair of pivoted sprung wheels. A string of sensors can be positioned inside a casing for a complete de"ection pro!le.
Speci�cations
Sensor
Measuring range
Accuracy
Temperature range
As tested under lab conditions
Uniaxial or biaxial
± 15˚ , ± 30˚
± 0.1 % fs
0 to 80˚C
1
1
Speci�cations
Measuring range
Resolution
Accuracy
Table size
± 75 mm (direct)
± 50 mm (inverted)
0.01 mm
0.1 mm
625 mm x 625 mm
Shape Accel ArrayProduct Description
SAA is an array of rigid segments separated by special joints. Triaxial MEMS gravity sensors in segments measure the tilt. SAA can be used vertically to calculate the 3D shape and horizontally to track vertical deformation. The two types of SAA, Field Array designed for low power consumption and long length and Research Array is designed to provide high speed data from all sensors.
Speci�cations
Environment
Operating Temp. Range
Acceleration
Water proof to 900 kPa
-20 to 70˚C
Range ± 2G
Direct and Inverted Plumb LineModel No. TES-DS-50/51
Product Description
TES-DS-50 (direct) and TES-DS-51 (inverted) plumb lines are used for monitoring tilt of a tall structure or a high rise building and for measurement and monitoring of relative displacement in a concrete or masonry dam. The readout system consists of reference pendulums and two travelling telescopes (one each for the X and Y axes) for measurement of displacement. An electronic measurement device is optionally available.
Tritech Instruments Pte Ltd
31 Changi South Avenue 2, Presscrete Building, #02-01, Singapore 486478
Tel: +65 65465965 Fax:+65 65466527 Email: [email protected] www.tritech.com.sg
-20 t
Triaxial Triaxial can be used can be used
vertically to calculate the 3D shape and horizontally to track vertical vertically to calculate the 3D shape and horizontally to track vertical deformation. The two types of SAA, Field Array designed for low power deformation. The two types of SAA, Field Array designed for low power consumption and long length and Research Array is designed to consumption and long length and Research Array is designed to
Water proof to 900 kPaWater proof to 900 kPa
Direct and Inverted Plumb LineDirect and Inverted Plumb Line
TES-DS-50 (direct) and TES-DS-51 (inverted) plumb lines are TES-DS-50 (direct) and TES-DS-51 (inverted) plumb lines are monitoring tilt of a tall structure or a high rise building and for monitoring tilt of a tall structure or a high rise building and for measurement and monitoring of relative displacement in a concrete or measurement and monitoring of relative displacement in a concrete or masonry dam. The readout system consists of reference pendulums and masonry dam. The readout system consists of reference pendulums and two travelling telescopes (one each for the X and Y axes) for measurement two travelling telescopes (one each for the X and Y axes) for measurement of displacement. An electronic measurement device is optionally available.of displacement. An electronic measurement device is optionally available.