in this section contents · • strobe: 12-110 volt led: 12-80 volt flash pattern• • strobe:...
TRANSCRIPT
Lighting 7
LightingIn This Section Contents
LED/Halogen/HID WorklampsLED/Halogen/HID worklamps in square, round, oval or rectangular for use on automotive applications.
Strobes/Beacons/MiniBarsStobes, Beacons and Minibars are available including:Low/high profile strobes, Rectangle Strobes, Tall Strobes, Small Strobes, LED Beacons, Rotating Beacons, Strobe Beacons & LED minibars.
Truck & Trailer LampsLED Truck and trailer lamps (singles, doubles & triples), pre wired kits, number plate lamps, reflectors & marker lamps.
Remote Controlled SearchlightsRemote controlled searchlights available as either permanent mount, magnetic mount or suction cup in white, chrome, black and charcoal.
Worklamps...................................................... 8
Strobes............................................................ 11
Beacons.......................................................... 13
Minibars/Lightbars......................................... 15
Truck & Trailer Lamps................................... 16
Remote Controlled Searchlights.................. 19
LIGHTING SYSTEMS
Lighting8
Features• 10-30 VDC• 1.2 A• 30 x 3W LED’s• Aluminium heatsink housing• 1830 Lumens• Flood beam• IP68Size: 4.96” x 4.96”
Part No..........E92008
Square LED Worklamp
Features• 12-24 VDC• 5 x 3W LED’s• Aluminum heatsink housing• 490 Lumens• Spot beam• IP67Size: 3.8” x 3.9”
Part No..........E92003
Features• 12-24 VDC• 0.7 A• 6 x 3W LED’s• Aluminium heatsink housing• 550 Lumens• Flood beam• IP67Size: 5.3” x 3.1”
Part No..........E92001
Features• 12-24 VDC• 7 x 3W LED’s• Aluminium heatsink housing• 640 Lumens• Spot beam• IP67Size: 5.3” x 3.1”
Part No..........E92002
Features• 12-24 VDC• 1.0 A• 5 x 3W LED’s• Aluminium heatsink housing• Acrylic lens• 500 Lumens• Flood beam• IP67Size: 4.33” x 5.04”
Part No..........E92007
Features• 10-30 VDC• 1.6 A• 9 x 3W LED’s• Aluminium heatsink housing• Acrylic lens• 1365 Lumens• Flood beamSize: 4.33” x 5.04”
Part No..........E92006
Square LED Worklamp
Square LED Worklamp
Square LED Worklamp
Oval LED Worklamp
Oval LED Worklamp
LED Worklamps
Lighting 9
LED & Halogen Worklamps
Round Halogen Worklamp
Features• 12V• 4.1 A• H3 Halogen bulb - 55W• Rubber Par 36 housing• Aluminium reflector• 1100 Lumens • Flood beam• Toughened Glass LensSize: 6.18”
Part No..........E91001
Features• 12V• 4.1 A• H3 Halogen bulb - 55W• Reinforced nylon housing• Aluminium reflector• 1100 Lumens• Flood beam• Toughened Glass LensSize: 5.45” x 5.82”
Part No..........E91005
Features• 12V• 5.2 A• H3 Halogen bulb - 55W• Reinforced nylon housing• 1190 Lumens• Toughened Glass LensSize: 3.6” x 4.4”
Part No..........E91025..........Flood BeamPart No..........E91026..........Spot Beam
Features• 12V• 5.2 A• H3 halogen bulb - 55W• Glass lens• Reinforced nylon housing• 1190 Lumens• Toughened Glass LensSize: 3.9” x 3.9”
Part No..........E91099..........Flood BeamPart No..........E91102..........Spot Beam
Square Halogen Worklamp
Square Halogen Worklamp
Square Halogen Worklamp
Round LED Worklamp
Round LED Worklamp
Features• 10-30 VDC• 1.1 A• 6 x 3W LED’s• Aluminium heatsink housing• Acrylic lens• 550 Lumens• Flood beam• IP67Size: 4.57” x 5.04”
Part No..........E92004
Features• 10-30 VDC• 8 x 3W LED’s• Aluminium heatsink housing• Acrylic lens• 750 Lumens• Flood beam• IP67Size: 4.3” x 5.04”
Part No..........E92005
Lighting10
Product DescriptionHobbs offers a full line of heavy-duty halogen off-highway vehicle lamps to keep equipment moving long after the sun has set. The halogen lamp housings are constructed of durable, vibration resistant materi-als. The securing hardware is zinc plated steel with a black dichromate coating.Reflectors are vacuum metalized. The borosiliate glass lenses are highly resistant to cracking, especially when subjected to extreme temperature changes.
Sealed Beam Replacements Replacement sealed beams are offered in both 3” x 5” and 4” x 6” rectangular size lenses. These are designed with the same rugged construction as the originals and meet the same demanding standards. These lamps are also designed to withstand tough environmental conditions, such as sudden tempera-ture change, shock, and intense vibration
Application: Automotive and Industrial
Halogen Lamps
Halogen Swivel Mount Lamps
Part No. Shape Configure Size (in inches) Voltage Watts Amps Replacement Beam
7189850 Rectangular Wide Flood 4x6 12 50 4 7101750
7190250 Rectangular Spot 4x6 12 50 4 7179450
7191550 Rectangular Trap 4x6 12 50 4 7179250
7254050 Rectangular Wide Flood 4x6 24 60 2.5 7254150
7254250 Rectangular Trap 4x6 24 60 2.5 7254350
7254450 Rectangular Spot 4x6 24 60 2.5 7254550
7376150 Rectangular Wide Flood 3x5 12 50 4 7240850
7376250 Rectangular Narrow Flood 3x5 12 50 4 7257350
7376350 Rectangular Trap 3x5 12 50 4 7280150
7376450 Rectangular Spot 3x5 12 50 4 7380450
7346850 Round Wide Flood 4.5 12 50 4 7051050
7346950 Round Trap 4.5 12 50 4 7072950
Part No. Configure Size (in inches) Voltage Watts Amps Magnetic Base Replacement Beam
8041310 Flood 3x5 12 50 4 Mag base & Switch 7240850
8050805 Flood 3x5 12 50 4 Mag base 7240850
8050905 Spot 3x5 12 50 4 Mag base 7380450
8051010 Spot 3x5 12 50 4 Mag base & Switch 7380450
Portable Halogen Lamps (Rectangular)
Dimensions
LED/Halogen Worklamps
3 x 5 Version
3.77 REF
3.15 REF
3.09 REF 3.53 REF
5.89 REF
1/2-13 NC-2STUD
3.12REF
3.16REF
6.90 REF
4.49RE F
3.10REF
1.2-13 NC-2STUD
2.24REF
4 x 6 Version3 x 5 Version
Magnetic LED Worklight
Specifications• 6x3 Watt LED’s• 12-80 Volt systems• 2.0A on 12 Volt systems• 1.0A on 24 Volt systems• 0.8A on 80 Volt systems• 900 Lumens• Magnetic Suction Base• IP67• APPROVAL: CE, e13
Dimensions 213mm (Overall Height) x 106mm (Base Width) x 112.5mm (Lamp Width) x 108.5mm (Lamp Height)
Part No..........PL9806M
LIGHTING SYSTEMS
Lighting 11
Part No. Description Shape Size” Beam Voltage Wattage
84760 HID Xenon Lamp Round 5” Flood 12 40
88735 HID Xenon Lamp Round 5” Flood 24 40
8975250 HID Xenon Lamp Rectangle 5” X 7” Flood 12 35
8975350 HID Xenon Lamp Rectangle 5” X 7” Flood 24 35
HID generates light at higher colour temperature than halogen• The light is a brighter white than halogen • Some perceive it as “blue” in comparison to halogen light • It is closer to natural sunlight than halogen
185 mm 145.5 mm
160mm
152 mm 127 mm
182mm
Dimensions are approximate
HID (High Intensity Discharge) Worklamp
Product DescriptionDesigned for tough environments Such as off highway, construction, mining and agriculture.withstands 10G’s of vibration in three planes IP68 rated - totally sealed against dust and long periods of immersion under pressure (most HID lights are IP65 only)No globe filament to fail 3 lens patterns available – flood, trap* & spot* (*by request only).
High efficiency Produces 3 times the light output of halogen with up to 35% less load on electrical systems Internal bal-last/igniter. The system produces almost white daylight spectrum and has no yellow appearance.
Life Expectancy6 times greater life than halogen Isolation mountedAvailable for 12 or 24 volt applications
Application: Automotive and Industrial
Dimensions
HID Worklamps/Strobes
Dimensions157mm (H) x 165mm (W)
ApprovalsCE, , SAEJ1318 Class II (PL568)CE, (PL9568REVA & PL9568MREVA)
PL558 & PL9558 Series Low Profile Strobes
PL568 & PL9568 Series High Profile Strobes
LIGHTING SYSTEMS
LIGHTING SYSTEMS
Part No Type WATT Volts Flashes Per Min. Amp/Joule
PL558 Large Strobe 12-24120 double flashes per min, 70 quad flashes
per min.
2 amp - 12V/8 Joule1 amp - 24V/12 Joule
PL9558Large LED
Strobe1 Watt x 6PCS 12-24 80 quad flashes per min.
1.2 amp - 12V0.6 amp - 24V
PL9558REVALED Revolving Light (Amber)
1 Watt x 6PCS 12-24 80 quad flashes per min.1.2 amp - 12V0.6 amp - 24V
PL9558MREVAMagnetic LED
Revolving Light1 Watt x6 PC 12-24 80 quad flashes per min.
1.2 amp - 12V 0.6 amp - 24V
PLR558FT Flash Tube
Dimensions118mm (H) x 165mm (W)
ApprovalsCE, , SAEJ1318 Class II (PL558)CE, , SAE J845 Class II (PL9558, PL9558REVA & PL9558MREVA)
Part No Type Volts Flashes Per Min. Amp/Joule
PL568 Large Strobe 12-24120 double flashes per min, 70 quad flashes
per min.
2 amp - 12V/8 Joule1 amp - 24V/12 Joule
PL9568REVA LED Revolving 12-80 80 quad flashes per min.0.5 amp - 12V 0.2 amp - 80V
PL9568MREVA Magnetic LED Revolving 12-80 80 quad flashes per min.0.5 amp - 12V 0.2 amp - 80V
PLR558FT Flash Tube
PL568LA Amber Lense
PL568LB Blue Lense
PL568LR Red Lense
e13e13
e13e13
Lighting12
System Voltage• Strobe: 12-110 Volt• LED: 12-80 Volt
Flash Pattern• Strobe: 60+/- 10 Flashes Per Minute • LED: 80 Quad Flashes Per Minute Current Draw• Strobe: 300ma @ 12 Volt / 35ma@110 Volt• LED: 140ma @ 12 Volt / 45ma @ 80 Volt
Dimensions65mm (H) x 142mm (W) 57mm (D)
Part No..........PL518..........Rectangular StrobePart No..........PL9518........Rectangular LED Strobe
AccessoriesPart No..........PLR538FT..........Flash Tube Part No..........PL518LA.............Amber Lense Part No..........PL518LB.............Blue Lense Part No..........PL518LR.............Red Lense Part No..........PL518LC.............Clear Lense
PL518 & PL9518 Series Rectangular Strobes
LIGHTING SYSTEMS
PL528 & PL9528 Series Tall Strobes
System Voltage• Strobe: 12-110 Volt• LED: 12-80 Volt
Flash Pattern• Strobe: 60+/-10 Flashes Per Minute • LED: 80 Quad Flashes Per Minute Current Draw• Strobe: 300ma @ 12 Volt / 35ma @ 110 Volt• LED: 140ma @ 12 Volt / 45ma @ 80 Volt
Dimensions - Tall Strobe/Tall LED Strobe130mm (H) x 99mm (W)
Part No..........PL528.........................Tall Strobe Part No..........PL9528.......................Tall LED Strobe Part No..........PL9528M...................Tall LED Strobe Magnetic Part No..........PL9528REV..............Tall Rotating LED Strobe AccessoriesPart No..........PLR528FT..........Flash Tube Part No..........PL528LA.............Amber Lense Part No..........PL528LB.............Blue Lense Part No..........PL528LR.............Red Lense Part No..........PL528LC.............Clear Lense
System Voltage• Strobe: 12-110 Volt• LED: 12-80 Volt
Flash Pattern• Strobe: 60+/- 10 Flashes Per Minute • LED: 80 Quad Flashes Per Minute Current Draw• Strobe: 300ma @ 12 Volt / 35ma @ 110 Volt• LED: 140ma @ 12 Volt / 45ma @ 80 Volt
Dimensions - Small Strobe/Small LED Strobe93mm (H) x 130mm (W)
Part No..........PL538.......................Small Strobe Part No..........PL538M...................Small Magnetic Strobe Part No..........PL9538M................Small Magnetic LED Strobe Part No..........PL9538....................Small LED Strobe Part No..........PL9538REV...........Small Rotating LED Strobe
AccessoriesPart No..........PLR538FT..........Flash Tube Part No..........PL538LA.............Amber Lense Part No..........PL538LB.............Blue Lense Part No..........PL538LR.............Red Lense Part No..........PL538LC.............Clear Lense
PL538 & PL9538 Series Small Strobes
LIGHTING SYSTEMS
LIGHTING SYSTEMS
Strobes
Lighting 13
Part No. FPM Voltage DC Joules
6220 85 Single 12-80V - 3.6W @ 12V, 4.0W @ 80V, IP66/67 1.5
6200 Series Low Intensity Strobe
The 6220 compact economical flashing beacon, covers a wide voltage range for all material handling, and other needs.
Product Description• Field replaceable flash tube• Sealed in epoxy • Polycarbonate lens• Glass filled nylon base• Reverse polarity protected• Voltage spike and surge protected• Temp range -30º C to +50º C• Available in amber, or other colours by enquiry
7900 Series LED Beacons
ECCO’S 7900 Series LED Beacons feature 8 of the latest high intensity 3 watt LED’s providing the brightness light output available in an LED beacon. Double or quad flash operation and high/low intensity control combined with a long maintenance free service life and low amp draw make this beacon the perfect choice for any application. Easily replaces old rotating or strobe beacons with the latest technology so no ongoing maintenance is required.
Features• Eight 3 watt LED’s provide unrivalled flash intensity• Double or quad flash operation with high/low intensity control• Die cast aluminium base is coated against corrosion & designed for vibration resistance &
dissipation.• Thread-on polycarbonate lens allows easy flash mode selection without tools• Reverse polarity, voltage spike and surge protected• Warranty: 5 years• Temperature Range: -22oF to +122oF (-30oC to +50oC)
Approvals• AMECA certified to SAEJ845 Class 1 (amber and red only) (blue and clear = Class II)• CE, e
3 Bolt Flange / 1” Pipe
Part No. Voltage Colour Amps FPM
Lens Led’s
7960A12-24
Amber Amber3.7 80 Double or 65 Quad
7960CX Clear Specify Colour
Part No. Voltage Colour Amps FPM
Lens Led’s
7960AVM12-24
Amber Amber3.7 80 Double or 65 Quad
7960CXVM Clear Specify Colour
Switchable Intensity: Flash Intensity & Double or Quad flash mode are user selectable via on-board switch
Vacuum Magnet
LensesPart No..........R7960LA..........Amber Part No..........R7906LC..........Clear
Strobes/Beacons
Part No. FPM Voltage DC Mounting
5840A 160 12V - 55W Permanent
5840A 160 24V - 70W Permanent
5840MK12 160 12V - 55W Magnetic Base
5840MK24 160 24V - 70W Magnetic Base
5840 Series Rotating Beacons
The 5840 rotating beacon brings ECCO® reliability in Flush Mount European Styling.
Product Description• Efficient design combining belt drive and steel bearings for long life• Twist-off lens• Field replaceable halogen bulb• Available in amber, and optional red, blue, and green• Dimensions: 7.5” H × 6” Dia.• Meets ECE and EMC regulations
12V supplied with H11224V supplied with H124
Lighting14
7660 Series Rotating LED Beacon/Vacuum Magnetic Beacon
• 8x3 watt LED's provide unrivalled flash intensity• Low amp draw long-life and maintenance free lighting solution• Clear lens with colored filters available• Long, maintenance free service life and low amp draw benefits of LED technology• Vacuum-Magnetic mount designed for use up to 65 MPH (100 KM’s)
The new 7660 Series RotoLED™ beacon combines all the major benefits of the latest LEDs with the identifiable warning visual of a rotator. LED hybrid technology provides a high intensity rotating warning signal with no gears, brushes or bulbs to wear out. Brushless magnetic drive system is used to spin the reflector disk, reducing noise and eliminating the typical motor/gear drawbacks associated with conven-tional rotators. Eight 3-watt LEDs combined with a TIR optic produce an SAE Class 1 warning beam. Additional benefits include an extended service free life, low amp draw and a 5 year warranty.
Features• SAE J845 Class, CE, R10• Low current draw - 2.1A @ 12V, 2.1A @ 24V • Multi-voltage 12 - 24V operation • Hybrid drive technology = no gears, bushes etc • Sealed to IP67 • 125 FPM • UV hard coating on lens • CE, e • Die-cast aluminium base
Part No..........7660A................Rotating LED BeaconPart No..........7660AVM..........Vacuum Magnetic Beacon
Strobe Beacons
Features• Die-cast aluminium base is coated against corrosion and designed for vibration resistance and heat
dissipation.• Thread-on polycarbonate lens and snap-fit flashtube allows easy field service without tools.• Shock-resistant circuit board mounting incorporates 7 support points.• Circuit board is conformal coated to prevent corrosion.• Consistent operation during voltage and temperature changes.• Reverse polarity, voltage spike and surge protected.• Warranty: Strobe = 2 years / Flashtube = 6 months• Temperature Range: -22°F to +122°F (-30°C to + 50°C) • AMECA certified to SAE J1318 Class II (amber, blue, clear, red only)
CE, e, R10
Part No. Profile Voltage Amps Joules Fpm
6655X Low12 - 24 VDC
2.28 to 13 Double or 12
to 17 Quad65 Double or
65 Quad6675X Medium
6695X High
Smart Strobe - 3 Bolt Flange / 1” Pipe
NOTE: Replace X in Part No. with desired colour: A = Amber, B = Blue, C = Clear, G = Green, R = Red
On-board photo cell automatically adjusts flash intensity for day or night operation. Double or Quad flash mode is user selectable via on-board switch.
Part No. Profile Voltage Amps Joules Fpm
6650X Low12 - 24 VDC
2.28 to 13 Double or 12
Or 17 Quad65 Double Or
65 Quad6670X Medium
6690X High
Part No. Profile Voltage Amps Joules Fpm
6650X-Mg Low 12 - 24 Vdc
2.28 to 13 Double Or 12
Or 17 Quad65 Double Or
65 Quad6670X-Mg Medium
Switchable Intensity - 3 Bolt Flange / 1” PipeFlash Intensity and Double or Quad flash mode are user selectable via on-board switch
Switchable Intensity - MagnetFlash Intensity and Double or Quad flash mode are user selectable via on-board switch
3 Bolt Flange / 1” PipeHigh, Medium and Low profile.
MagnetLow & Medium profile
Beacons/Strobe Beacons
Flash TubePart No..........R6501FT
Lighting 15
Strobe Beacons
Features• Circuit board is completely encapsulated in epoxy resin for protection against moisture, dust and
vibration.• Choice of base types: Powder coated aluminium or reinforced nylon.• 6750 and 6770 models feature i.beam® LED diagnostic indicator.• Thread-on polycarbonate lens and snap-fit flashtube allows easy field service without tools.
Consistent operation during voltage and temperature changes.• Reverse polarity, voltage spike and surge protected.• Warranty: Strobe = 2 years / Flashtube = 6 months• Temperature Range: -22°F to +122°F (-30°C to + 50°C)
Approvals• AMECA certified to SAE J1318 Class II (amber and clear only)• CE, e
SAE Class II StrobeSevere Vibration ApplicationsDesigned to meet all the harsh operational requirements of heavy mobile equipment. Both versions of the 6700 Series strobe are built to withstand the toughest applications, severe vibration, pressure washing and steam cleaning. Power supplies are completely encapsulated in epoxy resin and 6750/6770 versions feature ECCO’s patented i.beam®flash technology to monitor circuit board and flashtube operation.
NOTE: Replace X in part number with desired colour: A = Amber, B - Blue, C = Clear, G = Green, R= Red
Double/Quad Flash - 3 Bolt Flange/1” Pipe - Aluminium Base
Part No. Profile Voltage Amps Joules Fpm
6750X Low 12 - 24 VDC
2.610 Double or 16
Quad80 Double or
65 Quad6770X Medium
Double/Quad Flash - 3 Bolt Flange/1” Pipe - Glass Filled Nylon Base
Part No. Profile Voltage Amps Joules Fpm
6710X Low 12 - 48 VDC
1.3 7 Double or 10 Quad80 Double or
65 Quad6720X Medium
Profile Amber Blue Clear Green Red
Low R6050LA R6050LB R60510LC R60650LG R6050LR
Medium/High R6070LA R6070LB R6070LC R6070LG R6070LR
Lenses
FlashtubePart No..........R6501FT
Aluminium Base
Glass Filled Nylon Base
Minibar - 5135 Series
This compact 15” minibar features ECCO’s low noise, belt-driven rotating incorporating free-form reflectors.
Features• Low profile, high performance belt-driven minibar.• Unique free-form optics rotator reflector provide high intensity light output.• Vacuum magnet version features 2 factory fitted vacuum magnets and 15’ straight cigarette cord
with plug• Warranty: minibar=2 years /belt= ECCOLIFE Bulb = 90 days• Temperature Range: -22°F to +122°F (-30°C to + 50°C)
Approvals• SAE J845 Class 1 (amber, blue and red only)• CE, e
Part No..........5135..........Low Profile
DimensionsLow Profile - 400mm (L) x 210mm (W) x 114mm (H)High Profile - 400mm (L) x 210mm (W) x 129mm (H)
Strobe Beacons/Minibars
Part No. Profile Voltage Amps Joules Fpm
6650X-Mg Low 12 - 24 Vdc
2.28 to 13 Double Or 12
Or 17 Quad65 Double Or
65 Quad6670X-Mg Medium
Lighting16
ReflexTM SAE Class II 15’ LED MinibarReflexTM LED Minibars provide a compact yet powerful warning solution that offers the flexibility of either permanent or vacuum-magnet mounting. Featuring 12-24 VDC operation, the ReflexTM uses high intensity LEDs and reflecting technology to maximise light output. The permanent mount model offers users the choice of 18 user selectable flash patterns
Features and Benifits• Eight LED reflector modules, each comparising three LEDs provide high intensity light output• Compact, low profile minibar available in permanent or vacuum-magnet mount• Polycarbonate base & low profile lens• Vacuum-magnet versions feature two factory fitted vacuum-magnets and 15” straight cigarette cord
with switched plug. Vacuum-magnet versions feature quad flash pattern only.• Low amp draw and a long, maintenance free service life.• SAE J845 Class II, CE, e, R10• Temperature Range: -30°C to + 50°C (-22°F to + 122°F)• Warranty: 3 Years
Part No. Dome Colour Illumination Voltage AMPS Mount
5580A Amber Amber 12-24 2.7 Permanent
5580AVM Amber Amber 12-24 2.7 vacuum-magnetic
LED Minibar - 5580 Series
• High Quality LED’s (Low Power Consumption)• Polycarbonate Lens & Body • High Quality Resin (Adapts to temperature change)• Tinned Copper Wire• Stainless Steel Fittings• Vibration & Shock resistant• Multi Voltage 10-30V• Built in Reflex Reflector • ADR Approved • Cable Length (300mm)
MeasurementsSingles - 102mm x 94mm x 26mmDoubles - 197mm x 107mm x 28mmTriples - 288mm x 107mm x 28mm
Part No.........BR80AR..........Doubles • Stop/tail & indicator• Built in reflex reflector • Also available in kit form• Includes pre-wired loom
Part No.........BR80ARR..........Triples• Dual Stop/tail & indicator• Built in reflex reflector • Also available in kit form• Includes pre-wired loom
80 Series LED Truck & Trailer Lamps
Minibars/Truck & Trailer Lamps
9818 Series Mini LED Strobe Light Bar/Magnetic Mini LED Strobe Light Bar
Specifications• 12-24 Volt systems• 8 LED modules each comprising 3Wx3PCS• 17 different Flash Patterns• Variable Flash Rate• 1.5A on 12V volt systems• 750mA on 24V volt systems• APPROVAL: CE, e13, SAE J845 Class 1
Dimensions 400mm (Length) x 200mm (Width) x 65mm (Height)
LIGHTING SYSTEMS
9818 Series Lens Chart
Part No. Outer Lens Colour Frensel Light 1 Colour Frensel Light 2 Colour
PL9818CAA Clear Amber Amber
PL9818AAA Amber Amber Amber
9818M Series Lens Chart
Part No. Outer Lens Colour Frensel Light 1 Colour Frensel Light 2 Colour
PL9818MAA Clear Amber Amber
PL9818MAA Amber Amber Amber
Lighting 17
• High quality LED’S (low power consumption)• High quality resin (adapts to temperature change)• Polycarbonate lens• Tinned copper wire & stainless steel fittings• Vibration & shock resistant• Multi Voltage 10-30V• Built in reflex reflector• Loom protection over cabling• Weather poof connectors supplied• ADR approved
MeasurementsSingles - 179mm x 130mm x 40mmDoubles - 391mm x 130mm x 40mm Triples - 603mm x 130mm x 40mm
TriplesPart No..........BRJLARR..........Dual stop/tail & indicator (LH)Part No..........BRJRRRA..........Built in reflex reflector (RH)Part No..........BRJLARW..........Stop/tail, indicator & reverse (LH)
DoublesPart No..........BRJRWRA..........Built in reflex reflector (RH)Part No..........BRJLAR...............Stop/tail & indicator (LH)Part No..........BRJRRA..............Built in reflex reflector (RH)
SinglesPart No..........BRJR..........Stop/tailPart No..........BRJA...........Indicator Part No..........BRJW..........Reverse
Jumbo Series LED Truck & Trailer Lamps
180 Series LED Truck & Trailer Lamps
• High Quality LED’s (Low Power Consumption)• Polycarbonate Lens• Tinned Wiring and stainless steel fittings• Vibration & Shock resistant• Built in Reflex Reflector • ADR Approved • Cable Length (300mm)
Dimensions: 106mm x 100mm x 47mm
Part No..........BR180AR............Stop/tail & indicator (includes 300mm pre-wired loom)Part No..........BR180ARN.........Stop/tail, indicator & n/plate (includes 300mm pre-wired loom)
• High Quality LED’s (Low Power Consumption)• Polycarbonate Lens & Body • High Quality Resin (Adapts to temperature change)• Tinned Copper Wire• Stainless Steel Fittings• Vibration & Shock resistant• Multi Voltage 10-30V• Built in Reflex Reflector • ADR Approved • Cable Length (300mm)
MeasurementsSingles - 106mm x 134mm x 36mmDoubles - 231mm x 134mm x 36mmTriples - 356mm x 134mm x 36mm
Part No.........BR100AR..........Doubles• Stop/tail & indicator• Built in reflex reflector
Part No..........BR100ARR..........Triples• Stop/tail & indicator• Built in reflex reflector
100 Series LED Truck & Trailer Lamps
Truck & Trailer Lamps
Lighting18
• Self Adhesive• 2 Pack
Dimensions: 65mm x 30mm x 8mm
Part No..........BRREFR..........Red ReflectorPart No..........BRREFA..........Amber ReflectorPart No..........BRREFW..........White (clear) Reflector
• 6 High Quality LED’s (Low Power Consumption)• Polycarbonate Lens & Body • Tinned Wiring (Cable Length - 350mm)• Vibration & Shock resistant• Multi Voltage 10-30V • ADR Approved
Dimensions: 81mm x 41mm x 32mm
Part No..........BR25C..........Opaque BodyPart No..........BR25B..........Black Body
Number Plate Lamps
Reflectors
Truck & Trailer Lamps
Description: Rectangular, Stop/Tail, indicator lampPackage Type: OEM pack (single unit)Dimensions: 150mm L x 80mm Wx 22mm DCable Length: 300mm Tinned Voltage: 12 Volt Only Fittings: Stainless SteelLens Material: PolycarbonateWarranty: 5 Years Special Features: ADR Approved
Part No..........BR206L..........Left Side Part No..........BR206R..........Right SidePart No..........BR206LR..........Twin Pack
206 Series LED Truck & Trailer Lamps
180 Series LED Truck & Trailer Lamp Kits
• High Quality LED’s (Low Power Consumption)• Polycarbonate Lens• Tinned Wiring and stainless steel fittings• Vibration & Shock resistant• Built in Reflex Reflector • ADR Approved
Part No..........BR180TPNP.......Pre-wired kitPre-wired kit includes: 1 x BR180AR (1 x 150mm cable)1 x BR180ARN (1 x 1600mm cable)1 x Pre-wired loom (5000mm)
Lighting 19
Remote Controlled Searchlights
Go
ligh
t S
tryk
er 3
000
Go
ligh
t S
tryk
er 3
006
Go
ligh
t S
tryk
er 3
051
Go
ligh
t S
tryk
er 3
0002
Go
ligh
t S
tryk
er 3
0062
Go
ligh
t S
tryk
er 3
0512
Go
ligh
t S
tryk
er 3
100
Go
ligh
t S
tryk
er 3
106
Go
ligh
t S
tryk
er 3
151
Go
ligh
t S
tryk
er 3
067
Go
ligh
t S
tryk
er 3
066
Go
ligh
t S
tryk
er 3
049
Go
ligh
t S
tryk
er 3
020
Go
ligh
t S
tryk
er 3
021
Go
ligh
t S
tryk
er 3
026
Rad
iora
y 20
00
Rad
iora
y 20
51
Rad
iora
y 20
20
Go
ligh
t 20
49
Go
ligh
t 20
67
Go
ligh
t 51
49
Rad
iora
y 79
00
Rad
iora
y 79
01
Rad
iora
y 79
51
Remotes
Wireless Hand Held remote x x x x x x x x x x x x x x x x
Wireless Dash mount remote x x x x x x
Hard Wired Dash Mount Remote x x x x x x
Wired remote x
Mounting
Permanent Mount x x x x x x x x x x x x x x x x x x
Magnetic Mount x x x
Suction Cup x x x
Permanent Mount Shoe x x x
Colour
White x x x x x x x x x x
Chrome x x x x x
Black x x x x x x x x
Charcoal x
Remote Controlled Searchlights
Stryker
Radioray
NOTE: Models appearance may vary from those shown.
The Golight’s patented product design utilize a combination of bulb, lens and reflector technology to generate extremely bright lights. The designs eliminate dark spots, maximise effective beam distance and provide the user an effective spectral pattern.
Stryker Features• Wireless Remote controlled Operation • Three Different Remote Control Options• 370° Rotation x 135° Tilt• Stainless Stell mounting plate• U.V. Ray and Salt Water Resistant• 5.5 Amps with 12v Power Source
Radioray Features• Remote controlled Operation • Three Different Remote Control Options• 370° Rotation x 135° Tilt• Permanent and Portable Mounting• U.V. Ray and Salt Water Resistant• 5.5 Amps with 12v Power Source
• High Quality LED’s (Low Power Consumption)• Polycarbonate Lens• Tinned Wiring (2 Cable Lengths available)• Vibration & Shock resistant• Multi Voltage 10-30V• ADR Approved
Dimensions: 60mm x 30mm x 22mm
Part No..........BR1AR..........Side Position Marker Amber/Red..........0.5 Meter CablePart No..........BR1R.............Rear Position Marker Red.........................0.5 Meter CablePart No..........BR1A.............Side Indicator Marker Red.........................0.5 Meter CablePart No..........BR1W............Front outline marker white.........................0.5 Meter Cable
Marker Lamps