important - engenius...7 reset button — for resetting the router to its factory default settings...
TRANSCRIPT
![Page 1: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/1.jpg)
1
![Page 2: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/2.jpg)
2
IMPORTANT
To install this router, please refer to the Quick Start Guide included in the product packaging.
To activate and use EnShare™ refer to the document “Using EnShare” also in the product packaging.
![Page 3: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/3.jpg)
3
Chapter 1 Product Overview..............................................................5 Key Features....................................................................................................6 TechnicalSpecifications/SoftwareFeatures...................................8 Physical Interface..........................................................................................9
Chapter 2 Controlling the Router Through Its Web Configuration Interface...........................................................10 Logging In.....................................................................................................11 ViewingtheWebConfigurationDashBoard..................................12 Home Page...................................................................................................13 WebMenusOverview...............................................................................14 Internet.................................................................................................15 Wireless2.4GHz..........................................................................................16 ParentalControls........................................................................................17 GuestNetwork.............................................................................................18 IPv6.......................................................................................................19 Firewall................................................................................................20 VPN.................................................................................................................21 USBPort..........................................................................................................22 Advanced.......................................................................................................23 Tools................................................................................................................25
Chapter 3 Installation Setup Wizard..............................................26 InternetSetupWizard...............................................................................27 SettingUpYourInternetConnection.................................................28 SettingYourWirelessSecurity..............................................................29 SettingyourRouter’sAdministratorPassword.............................30 Setting your Router’s Time Zone........................................................31 Status and Save Settings.......................................................................33
Chapter 4 Basic Network Settings.................................................34 NetworkSettings.......................................................................................35 Status.............................................................................................................36 WANSettings...............................................................................................37 LANSettings................................................................................................38 WLANSettings............................................................................................39 GuestNetwork............................................................................................40 ConfiguringtheLAN(LocalAreaNetwork).....................................41 DHCPServer.................................................................................................42 ConfiguringDynamicHostConfigurationProtocol.......................43 EnableStaticDHCPIP..............................................................................44 CurrentStaticDHCPTable......................................................................45 ConfiguringEventLogging.....................................................................46 MonitoringBandwidthUsage................................................................47 ConfiguringtheSystemLanguage.....................................................48 ConfiguringIPCameras............................................................................49 ConfiguringInternetSettings...............................................................50 ConfiguringDynamicIP...........................................................................51 DNSServers..................................................................................................52 ConfiguringStaticIP.................................................................................53 ConfiguringPPPoE.....................................................................................54 ConfiguringPPTP.......................................................................................55 PPTP Settings..............................................................................................56 Configuring L2TP.......................................................................................57 L2TPSettings..............................................................................................58 ConfiguringDS-Lite...................................................................................59 WirelessLANSetup...................................................................................60 AccessPointMode....................................................................................61 WirelessDistributionSystemMode....................................................62 WDSSecuritySettingsScreen...............................................................63
Table of Contents
![Page 4: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/4.jpg)
4
Chapter 5 Wireless Encryption.....................................................64 Wi-FiProtectAccess(WPA)Pre-SharedKey..................................65 ConfiguringSecurity.................................................................................66 Encryption Type.........................................................................................67 WPA Radius..................................................................................................68 WiredEquivalentPrivacy(WEP)...........................................................69 ConfiguringFilters......................................................................................70 MACAddressFilteringTable.................................................................71 ConfiguringWi-FiProtectedSetup....................................................72 ConfiguringClientList.............................................................................73
Chapter 6 Advanced Settings...........................................................74 ConfiguringAdvancedSettings............................................................75 SettingUpParentalControls.................................................................77 AddingaControlPolicy............................................................................78 ViewingParentalPolicies........................................................................81 GuestNetwork............................................................................................82 ConfiguringtheDHCPServerSetting...............................................83 ViewingtheDHCPClientListontheGuestNetwork.................84 IPv6.................................................................................................................85 ViewingtheIPv6ConnectionStatus.................................................86 ConfiguringStaticIPv6............................................................................87 SettingAutoconfiguration.....................................................................88 Configuring PPPoE....................................................................................89 Configuring6to4........................................................................................91 ViewinglocalConnections.....................................................................92 Firewall Setup.............................................................................................93 ConfiguringAdvancedSettings...........................................................94 ConfiguringDemilitarizedZone...........................................................96 ConfiguringDenialofService................................................................97 VirtualPrivateNetworkSetup..............................................................98 ConfiguringaVPNTunnelProfile.........................................................99 General........................................................................................................100 SA(SecurityAssociation)......................................................................101
Network.......................................................................................................102 Advanced.....................................................................................................103 ConfiguringaUserSetting...................................................................104 USBPort/Enshare..................................................................................105 ViewingFileServer.................................................................................106 ViewingDLNA...........................................................................................107 AdvancedNetworkSettings................................................................108 PortMappingSetup................................................................................109 CurrentPortMappingTable................................................................110 PortForwardingSetup...........................................................................111 CurrentPortForwardingTable..........................................................112 Port Triggering Setup............................................................................113 ApplicationLayerGetawaySetup....................................................115 Universal Plug and Play Setup...........................................................116 InternetGroupMulticastProtocolSetup.......................................117 QualityofServiceSetup.......................................................................118 Priority Queue...........................................................................................119 BandwidthAllocation.............................................................................120 Routing Setup...........................................................................................121 WakeonLANSetup................................................................................122 Tools Setup................................................................................................123 SystemTimeSetting..............................................................................124 SynchronizingTimewithaComputer.............................................125 DynamicDomainNameService(DDNS)Setup............................126 DiagnoseThatClientDevicesAreConnected.............................127 UpgradingtheRouter’sFirmware....................................................128 BackingUptheRouter’sSettings.....................................................129 RebootingtheRouter............................................................................130
Appendix..........................................................................................131 WallMountingtheRouter....................................................................132 FCCInterferenceStatement...............................................................133 IndustryCanadaStatement................................................................134
![Page 5: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/5.jpg)
5
Chapter1 Product Overview
![Page 6: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/6.jpg)
6
MaximumdataratesarebasedonIEEE802.11standards.Actualthroughputandrangemayvarydependingonmanyfactorsincludingenvironmentalconditions,distancebetweendevices,radiointerferenceintheoperatingenvironment,andmixofdevicesinthenetwork.EnGeniusTechnologies,Inc.EnShareTMsupportsbothFAT32andNTFSUSBformats.Transferspeedsofdatafromyourrouter-attachedUSBstoragedevicetoaremote/mobiledevicemayvarybasedonInternetuplinkanddownlinkspeeds,bandwidthtrafficateithersendorreceivelocations,thedataretrievalperformanceoftheattachedstoragedeviceorotherfactors.EnGeniusdoesnotguaranteecompatibilitywithallUSBdrives.EnGeniusdoesnotwarrantitsproductsorEnSharefromlossofdataorlossofproductivitytime.Featuresandspecificationssubjecttochangewithoutnotice.Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.ForUnitedStatesofAmerica:Copyright©2013EnGeniusTechnologies,Inc.Allrightsreserved.
Therouter’sdesignenablesuserstoconnectnumerouswired
andwirelessdevicestoitandsupportsintensiveapplications
likestreamingHDvideoandsharingofmediainthehomeand
accessingmediaawayfromthehomewithEnShare-Your
PersonalMediaCloud.
Product Overview
Key Features
• WirelessN300IEEE802.11b/g/n• Upto300Mbpsinthe2.4GHzfrequencyband• Built-in4-PortGigabitSwitchforoptimalaudio/visual
streaming• USBPorttoshareandaccessmediacontentinthehomeor
whenyou’reawayfromhomewithEnShare™• XtraRange™Technologyforbettersignalcoverage
throughout your home• NextGenerationIPv6Compliant• ParentalControls• Upto4GuestAccesssettings• Industry-standardWirelessEncryptionandSecurity• VPNServerSupportLite-BusinessApplications• EasySetupWizard•
Robust and Reliable Wireless PerformanceTheESR350isanXtraRangeWirelessN300Routerwitha
built-in4-portGigabitEthernetswitch.Thiscosteffective
routercanconnecttoDSLorcablemodemstoprovide
high performance Internet access for desktop or laptop
computers,tablets,smartphonesandawidevarietyofhome
entertainmentdevices,likeHDTVs,settopboxes,Blu-ray
players and game consoles.
![Page 7: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/7.jpg)
7
Product Overview
A Media Sharing PlatformTheESR350isdesignedtoaccessandsharemediafor
devicesonthehomenetwork.Inadditiontoconnecting
homeentertainmentcomponentstoanyofitsavailable
GigabitEthernetports,theESR350alsoincludesaUSBport
forattachingaUSBstoragedevicesowirelessdevicesin
thehomeorawayfromthehomecanaccessmediacontent
whereverthereisanavailableInternetconnectionthrough
EnShare™-YourPersonalMediaCloud.
EnShareisavailableasanInternetportalforaccessingstored
mediaconnectedtotheUSBportoftherouter(Seethe
UsingEnSharedocumentintheproductpackaging).EnShare
willalsobeavailableasanappforAppleiOSdevices(iPads,
iPodsandiPhones)andAndroid-baseddevices(smartphones,
tabletPCs,Kindleandothermobilereaders)soon.Theapps
willbeavailablethroughAppleiTunesStoreandGooglePlay
respectively.
Industry-standard Wireless SecurityThe router supports a variety of security features and
mechanismsincludingindustry-standardWPA/WPA2wireless
encryptiontopreventunauthorizedaccesstoyournetwork.It
alsoincludesabuilt-inSPI(StatefulPacketInspection)firewall
tohelppreventattacksfrommalicioussoftware(malware)
from the Internet. The router also supports IPv6.
Attach USB storage to the ESR350 and access video, music, and other media throughout your home or away from home from your smartphone, tablet, or laptop.
USBMediaAnywhere with EnShareTM
More Guest Access OptionsTheESR350alsoincludesuptofour(4)separateanddiscrete
GuestAccessoptionsallowingtherouter’sadministratorto
assigndifferentnames(SSIDs-ServiceSetIdentifiers)foreach
logintothehomenetworksofriendsorvisitorscanaccessthe
user’sInternetconnectionwithoutaccessingpersonaldata
storedonnetworkedcomputersinthehome.
![Page 8: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/8.jpg)
8
Technical Specifications
Device InterfaceGigabitWANPort4GigabitLANPortsUSB2.0PortPushButtonforWPSResetButton
IEEE Standards802.11b/g/nUpto300Mbpswirelessspeedinthe2.4GHzfrequencyband802.3i/u/ab
LED IndicatorsPowerWLAN(WirelessConnection)Internet
Package ContentsESR350RouterPowerAdapter(12V1A)QuickStartGuideRJ45EthernetCable
Power SpecificationExternalPowerAdapterDCIn,12V1A
CertificationsFCC/CE/IC
Physical/Environmental ConditionsOperatingTemperature:0º~40ºCelsiusHumidity:90%orless(non-condensing)StorageTemperature:-20º~60ºCelsiusHumidity:95%orless(non-condensing)
Software Features
Frequency Bands2.400~2.484GHz(11b/11g/11n)
Operating ModeAPRouter/WDS
Wireless FeaturesAutoChannelSelectionOutputPowerControlWMM(WirelessMultimedia)MSSID(MultipleSSID)
SecurityWEP/WPA-PSK/WPA2-PSKTKIP/AESHiddenSSIDMACAddressFiltering802.1XAuthenticationDDoSDHCPServer/ClientSPI(StatefulPacketInspection)NATPortForwardingDMZPortMapping/TriggeringVPNServer(PPTP/L2TP)VPNClient(PPTP/L2TP)VPNPass-through(PPTP/L2TP/IPSec)RuleBased(IPAddressRanges,PortBlockICMPVPNTunnel(Maximum5)QoSIP FilteringPort FilteringDDNSIPv6Pass-throughMACCloneTrafficMonitorWANType:PPPoE/DHCP/StaticIPUSBFeatures:SAMBA
![Page 9: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/9.jpg)
9
Physical InterfaceDimensions and WeightsWeight:0.5lbs.Diameter:6.36”Height:1.64”
1 WLAN 2.4 GHz LED2 Power LED3 WAN Port/(Internet) Status LED
4DC Power Jack—connectstheESRSeriesRoutertoitsDCpoweradapter
5 WAN Port—connectstheESRRoutertoacableorDSLmodemtoaccesstheuser’sbroadband(Internet)connection
6 LAN Ports (1 – 4) — for connecting home entertainment components,computersorotherEthernet-enableddevicesusingEthernetcables
7Reset Button — For resetting the router to its factory default settingsbypressingbuttonformorethan11secondsoruntilthePowerLEDstartsflashing.
8USB PortforconnectingaUSBStorageDevice9 WPS Button—Wi-FiProtectedSetupbutton.Toassociate
anotherWPS-enabledclientdevice(computer,wirelessmediabridge,USBadapter,etc.)presstheWPSbuttonfor2to5secondsontherouterwhilealsopressingtheWPSbuttononthe end device.
Whenconsideringtheplacementoftherouterrememberthefollowing:• Itmustbeclosetoanelectrical
outlet.• Foroptimalwirelessconnectivity,
place the router near the center of theroomifpossible,atahighlevel
Otherelectronicdevicesandsomearchitectural construction materials orimpedimentsmayinterferewiththewirelesssignal(s)oftherouterand reduce its range or coverage. Try tominimizethenumberofwallsorfloorsthattherouter’ssignalneedstopenetratetoconnecttootherwirelessdevices.
![Page 10: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/10.jpg)
10
Chapter2 Controlling the Router Through Its Web Configuration Interface
![Page 11: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/11.jpg)
11
Logging InDuringtheQuick Start Guide procedure, you should have
successfully logged into the router’s Web Configuration user interface (essentiallytherouter’soperatingsystemthatcontrolshowitoperates)andestablishedsomeinitialsettings
and controls for the router.
Ifyouwishtochangetherouter’ssettings (establishanewusernameandpasswordforthepersonwhomanages
andmaintainstherouter,setParentalControls,establish
aGuestAccess-SSIDsettingforvisitors,oranynumberof
othersettings)youcanlogintotheWebConfigurationagain
throughthewebbrowser(InternetExplorer,Safari,Chrome,
Firefox)onyourcomputerortabletdevice.
To do this, enter the router’s default IP address of
192.168.0.1intoyourbrowser’saddresswindow.1.Attheloginscreenenteryourusernameandapassword
2.ClickLogintocontinue.
The default login settings are:
username: admin
password:admin
It’s highly recommended that, if you haven’t done so already,
to change these default names, so your router and the devices
connectedtoitonyourhomenetworkaremoresecure.
![Page 12: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/12.jpg)
12
Viewing the Web Configuration Dash BoardTheHomePagescreenoftheWebConfigurationinterface,ordashboard,providesaccesstotherouter’ssettingsandcontrols.
Home Page
Home
SetupWizard
NetworkSettings
USBStorageSharing
IPCamViewer
Language
Logout
![Page 13: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/13.jpg)
13
Home Page
The Home PagedisplaystheareaswithintheWebConfigurationtowhichyoucannavigate:Setup Wizard,
Network Settings, USB Storage Sharing, IP Cam Viewer,
Language, and Logout
HomeTheHomelinktakesyoubacktothedashboardscreenno
matterwhereyouareintheWebConfigurationinterface.
Setup WizardTheSetupWizardlinkstartsthewizardthatautomatically
configurestherouter.
Network SettingsTheNetworkSettingslinkdisplaysthemenustomanually
configuretherouter.
USB Storage SharingTheUSBStorageSharinglinkdisplaysthemenustoaccess
shared storage devices connected to the router.
IP Cam ViewerTheIPCamViewerlinkdisplaysthemenustoviewanIP
cameraconnectedtothenetwork.
LanguageTheLanguagelinkdisplaysthemenutosettheOSDlanguage.
LogoutTheLogoutlinkclosestherouter’sWebConfiguration
interface from any screen.
![Page 14: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/14.jpg)
14
Web Menus Overview
SystemViewandeditsettingsthataffectsystemfunctionality.
Operation ModeConfigurethedevicetobearouterorWDSaccesspoint.
StatusDisplaysthesummaryofthecurrentsystemstatus.
ScheduleScheduleservicestostartandstopatspecifictimesorintervals.
Event LogViewrecordedsystemoperationsandnetworkactivityevents.
MonitorViewthecurrentnetworktrafficbandwidthusage.
LanguageConfiguretheapplicationmenuandGUIlanguage.
IP CameraViewtheIPcamerasconnectedtotheESRSeriesRouter.
![Page 15: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/15.jpg)
15
InternetViewandeditsettingsthataffectnetworkconnectivity.
StatusDisplaysasummaryoftheInternetstatusandtypeofconnection.
Dynamic IPSetupadynamicIPconnectiontoanISP(InternetServiceProvider).
Static IPSetup a static IP connection to an ISP.
PPPoESetup a PPPoE connection to an ISP.
PPTPSetup a PPTP connection to an ISP.
L2TPSetup an L2TP connection to an ISP.
![Page 16: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/16.jpg)
16
Wireless 2.4 GHzViewandeditsettingsfor2.4GHzwirelessnetworkconnectivity.
StatusViewthecurrentwirelessconnectionstatusandrelatedinformation.
BasicConfiguretheminimumsettingsrequiredtosetupawirelessnetworkconnection.
AdvancedConfiguretheadvancednetworksettings.
SecurityConfigurethewirelessnetworksecuritysettings.
FilterEstablishalistofclientdevices(computer,tablets,smartphones,printers,etc.)
basedontheirMAC(MediaAccessControl)numbersthatareallowedtowirelessly
connecttothe2.4GHznetwork.
WPSAutomatestheconnectionbetweenawirelessdeviceandyourencryptedrouter
usingan8-digitPIN.
Client ListViewthe2.4GHzwirelessdevicescurrentlyconnectedtothenetwork.
![Page 17: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/17.jpg)
17
Parental ControlsViewandeditsettingsforparentalcontrols.
WizardEnableordisabletheParentalControlsfunction.Themenualsoprovidesinforma-
tionforconfiguringparentalcontrolpolicies.
Web MonitorThemenuprovidesalogoftheeventsfordefinedparentalcontrolpolicies.
![Page 18: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/18.jpg)
18
Guest NetworkViewandeditsettingsforaguestnetwork.
SelectionEnableordisabletheGuestNetworkfunction.
DHCP Server SettingConfiguretheGuestNetworkDHCPserversettings.
DHCP Client ListConfiguretheGuestNetworkclientlist.
![Page 19: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/19.jpg)
19
IPv6ViewandeditsettingsfortheIPv6protocol.
BasicAllowsyoutoenableordisabletheIPv6andIPv6Pass-throughfunctions.
StatusShowsIPv6LANconnectiondetails.
Static IPv6ConfiguretheIPv6protocol.
Auto ConfigurationConfiguretheIPv6byobtainingtheinformationthroughtheISPprovider.
PPPoEConfigurethePPPoEnetworkprotocol,obtaininformationfromyourISP(Internet
ServiceProvider).
6to4AllowsIPv6packetstobetransmittedoveranIPv4network.
Link LocalConfiguretheIPv6linklocaladdress.
![Page 20: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/20.jpg)
20
FirewallViewandeditsettingsforthenetworkfirewall.
BasicEnableordisablethenetworkfirewall.
AdvancedConfigurevirtualprivatenetwork(VPN)packets.
DMZRedirectpacketsfromtheWANportIPaddresstoaparticularIPaddressonthe
LAN.
DoSEnableordisableblockingofDoS(DenialofService)attacks.
ACLConfigureaccesscontrollists.
![Page 21: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/21.jpg)
21
VPNViewandeditsettingsforVPNtunnelling.
StatusViewthestatusofcurrentVPNtunnels.
Profile SettingManuallyconfigureVPNtunnels.
User SettingConfigureusers,userIDandpasswordcombinations,andassignaccesstospecific
VPNtunnels.
WizardAutomaticallyconfigureVPNtunnelswithguidancefromthesoftware.
![Page 22: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/22.jpg)
22
USB PortForviewingandeditingsettingsforstoragesharing.
EnShare™EnablesordisablestheEnShareremoteaccessfunction.
File SharingEnablesordisablestheSambasharingfunction.
File ServerEnablesandconfigurestheFileServerfunction.
DLNAEnablesthediscoveryofDLNAdevices(someHDTVs,gameconsoles,somesettop
boxes/mediaplayers,Blu-rayplayers,somesmartphones,andnetworkattached
storage)onthehomenetwork.
![Page 23: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/23.jpg)
23
AdvancedViewandconfigureadvancedsystemandnetworksettings.
NATEnableordisableNetworkAddressTranslation(NAT).
Port MappingRe-directarangeofserviceportnumberstoaspecifiedLANIPaddress.
Port ForwardingConfigureserverapplicationstosendandreceivedatafromspecificportsonthe
network.
Port TriggeringConfigureapplicationsthatrequiremultipleconnectionsanddifferentinboundand
outboundconnections.
ALGConfiguretheapplicationlayergateway(ALG).
UPnPEnableordisableUniversalPlugandPlay(UPnP)functionality.
IGMPEnableordisabletheInternetGroupMulticastProtocol(IGMP).
![Page 24: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/24.jpg)
24
QoSConfiguresthenetworkqualityofservice(QoS)settingbyprioritizingtheuplink
anddownlinkbandwidth.
RoutingConfigurestaticrouting.
WOL(WakeOnLAN)ConfigureWakeonLANtoturnonacomputeroverthenetwork.
![Page 25: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/25.jpg)
25
ToolsForviewingandconfiguringtherouter’soperatingsystemandnetworktools
settings.
AdminForsettingtheadministrator’spasswordusedtologintotherouter.
TimeForconfiguringthesystemtimeontherouter.
DDNSMapsastaticdomainnametoadynamicIPaddress.
DiagnosisToperformaPingtesttoverifywhetheraspecificdeviceisconnectedtotheLAN.
FirmwareForupdatingtherouter’sfirmware.
BackupForloadingorsavingtheconfigurationsettingstoorfromabackupfileorto
restore the router to its factory default settings.
ResetRebootstherouter.
![Page 26: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/26.jpg)
26
Chapter3 Installation Setup Wizard
![Page 27: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/27.jpg)
27
Internet Setup Wizard
UsetheWizardtodetectandsetupthe
type of Internet connection you need,
tosetupasecurewirelessconnection,
tocreateanadministratorpasswordto
secure the device, or set the router’s date
and time properties.
TousetheInternetSetupWizard,follow
these steps:
1. Click the Wizard buttontoshowtheWizardstartscreen.
2.ClickNexttocontinuewiththesetupprocedure.
Home
SetupWizard
![Page 28: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/28.jpg)
28
1.DecidehowtosetuptheInternetconnection.
Note:It is recommended to let the device setup the Internetconnection automatically.
• Select Auto DetecttolettheWizardsetuptheInternetconnection.
• Select Manual Setup to set the properties yourself.
2.ClickNext to continue or Prev to return to the previous
screen.
If you selected Manual Setup,followthesesteps:
3. Select the Internet connection type and enter the
connection properties.
Setting Up Your Internet ConnectionNote:TheconnectiontypesavailablearestaticIP,PPPoE,DynamicIP,PPTP,andL2TP.
4.ClickNext to continue, Prev to return to the previous
screen, or Cancel to stop the procedure.
![Page 29: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/29.jpg)
29
Settingwirelessencryption.
ToencryptthewirelesssignalintheESR350router,followthese
steps:
1.EntertherouternameinthewirelessName(SSID)textfield.
2.SelectthesecuritylevelfromtheEncryptiondropdownlist.
3.EnterapasswordintheEncryptionKeytextfield.
4.Repeatsteps1through3toencrypttheband
5.ClickNext to continue, Prev to return to the previous screen, or
Cancel to stop the procedure.
Setting Your Wireless Security
Important:Toensurethenetworkissecure,itisrecommended to select High for an encryption level.
![Page 30: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/30.jpg)
30
Setting Your Router’s Administrator PasswordSetupapasswordtologintotheESRSeriesRouter.
1.EnterapasswordintheNew Passwordtextfield.2.EnterthesamepasswordintheRepeat New Passwordtextfield.3.ClickPrev to return to the previous screen, Skip to skip this procedure, Next to
continue, or Cancel to stop the procedure.
![Page 31: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/31.jpg)
31
Setting Your Router’s Time ZoneSetupdateandtimesyncronizationontheESRSeriesRouter
withacomputeroranNetworkTimeProtocol(NTP)server.
Tosynchronizedateandtimesettingswithacomputer,follow
these steps:
1.SelectSynchronizewithPC(computer)fromtheTime Setup
dropdownlist.ThedateandtimevaluesareshowninthePC Date and Timetextfield.
2.ClickPrev to return to the previous screen, Apply to save the
settings, or Cancel to stop the procedure.
TosynchronizethedateandtimesettingswithanNTPserver,
followthesesteps:
1. Select SynchronizewithNTPServerfromtheTime Setup
dropdownlist.
2.SelectatimezonevaluefromtheTime Zonedropdownlist.3.EnteranIPaddressordomainnameofanNTPserverinthe
NTP Servertextfield.
4.ClicktheEnable Daylight Savingscheckboxtoenableordisabledaylightsavingstime.
5.Selectthedateandtimevalueswhendaylightssavings
time starts in the Start Timedropdownlists.
![Page 32: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/32.jpg)
32
6.Selectthedateandtimevalueswhendaylightssavings
time ends in the End Timedropdownlists.
7.ClickPrev to return to the previous screen, Apply to
save the settings, or Cancel to stop the procedure.
![Page 33: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/33.jpg)
33
Status and Save SettingsThisscreenletsyoureview,changeandsaveyourInternet
connection,savewirelesssecuritysettingsorsetupupauser-
specifiednameforthedefaultEnGeniusDDNSservice.
Toreviewormodifythedevicesettings,followthesesteps:
1.ReviewthesettingsshownonthescreenfortheInternet
connection,the2.4GHznetwork,andtherouteradministrator
login.
2. You can change settings to the Internet connection and
wirelessnetworksettingsbyclickingtheSetupbutton.
Youmaywishtouseadifferentnamethat’seasiertoremember
forthedefaultEnGeniusDDNSserviceusedfortheEnShare™
feature.TospecifyyourownDDNSname,followthesesteps:
3. The Enableoptionshouldbeselectedbydefault.a. Enter the name in the Domain Nametextfield.b.SelectatimeintervaltorefreshtheDNSrecordsfromthe
Refreshdropdownlist.c.ClickApplytosavetheDDNSnameyouhaveentered.
4.ClickSavetoexittheWebConfigurationinterface.Therouterwillreboot(restart)toapplyallthesettingsyou’vespecified.
Devicesconnectedtotherouterwilltemporarilylosetheir
Internetconnection.Therebootmaytakeseveralseconds
beforetherouterandyourInternetconnectionareonceagain
available.
WARNING! Selecting DisableintheDDNSSettings/Statusfieldwilldisconnecttherouter’sconnection
tothedefaultEnGeniusDDNSserverandasaresult
willdisabletheEnSharefeaturewhichletsyouaccess
mediafromaUSBstoragedeviceconnectedtoyour
ESRpodrouterwhenyou’reawayfromyourhome.
![Page 34: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/34.jpg)
34
Chapter4 Basic Network Settings
![Page 35: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/35.jpg)
35
Network Settings
Viewing System StatusToseeamoredetailedviewoftherouter’sstatusthan
theinformationdisplayedontheHomepageoftheWeb
Configurationinterface,fromtheHomePageclickonNetwork Settings buttonintheuppernavigationbar.
Home
NetworkSettings
![Page 36: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/36.jpg)
36
StatusToviewtheStatussettings,clickSystem then click Status.
OntheStatuspage,youcanviewasummaryofthecurrentroutersystemstatusincludingtherouter’s(hardware/software
version,date/time),wirednetwork(LAN)andwirelessnetwork
(WLAN)information.
ModelThe model name of the ESR Series Router.
ModeThe operating mode of the ESR Series Router.
UptimeTheamountoftimetheESRSeriesRouterhasbeenconnected
for the current session.
Current Date/TimeThe current system date and time.
Hardware VersionThehardwareversionnumberoftherouter.
Serial NumberTheserialnumberoftherouter(requiredforcustomerserviceor
support).
Application VersionTheversionoftherouter’sfirmware.
Note:Toupdatetherouter’sfirmware,visitwww.engeniustech.com and go to the product page for your router, then select the Downloadstabatthebottomofthewebpagetoseeifanewerversionofthefirmwareisavailable.
![Page 37: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/37.jpg)
37
WAN Settings
Attain IP ProtocolDisplaystheIPprotocolinusefortherouter.Itcanbea
dynamic or static IP address.
IP AddressTherouter’sIPaddressasdesignatedbyanISP(InternetService
Provider).
Subnet MaskTherouter’sWANsubnetmaskasdesignatedbyanISPprovider.
Default GatewayTherouter’sgatewayaddressasdesignatedbyanISPprovider.
MAC AddressTherouter’sWANMAC(MediaAddressControl)address.The
router’sMACaddressislocatedonthelabelonthebottompanel
oftherouterandisuniqueforeachrouter.
Primary DNSTheprimaryDNSofanISPprovider.
Secondary DNSThesecondaryDNSofanISPprovider.
![Page 38: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/38.jpg)
38
LAN Settings
IP AddressTherouter’slocalIPaddress.ThedefaultLANIPaddressis
http://192.168.0.1ToaccesstheWebConfigurationinterfacefortherouter,type
thisaddressintotheaddress(URL)fieldofyourwebbrowser.
Thiscanonlybedoneinthesamephysicallocationwherethe
routerresides(yourhomenetwork).
Subnet MaskTherouter’slocalSubnetMask.
DHCP ServerTheDHCPsettingstatus(Default:Enabled).TheDHCP(Dynamic
HostControlProtocol)isasoftwaremechanisminyourrouter
thatassignsIPaddressestowiredandwirelessdevicesonyour
network,forexample,acomputer,printer,tabletorHDTVonyour
networkmaybeassignedanIPaddressofhttp://192.168.0.104.
Notehowtheaddressisessentiallyanextensionoradditionof
your router’s IP address.
MAC AddressTherouter’suniqueMACaddress.
![Page 39: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/39.jpg)
39
WLAN Settings
ChannelThecommunicationschannelusedbyallstations,orcomputing
devices,onthenetwork.
ESSIDTheIDvalueofasetofoneormoreinterconnectedbasicservice
sets(BSSs).
SecurityThesecuritysettingstatus(Default:Disabled).
BSSIDTheuniqueIDoftheBSSusingtheabovechannelvalueonthis
router.TheIDistheMACaddressoftheBSSsaccesspoint.
Associated ClientsThenumberofclientsassociated(activelylinkedtotheroutervia
awirelessorwired/Ethernetconnection)withthisSSID.
![Page 40: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/40.jpg)
40
Guest Network
Guest NetworkTheguestnetworkstatus.(Default:Disabled)
IP AddressTheGuestNetwork’sLANIPaddress.
Subnet MaskTheGuestNetwork’slocalsubnetmask.
DHCP ServerTheGuestNetworkDHCPsettingstatus(Default:Enabled).
Guest Network InterfaceTheSSID(ServiceSetIdentifier)oftheGuestNetwork.
![Page 41: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/41.jpg)
41
Configuring the LAN (Local Area Network)Thesettingsonthispageallowyoutoconfigurethewired
networksettings.Devicesconnectedtotherouter’sEthernet
portscompriseitsLAN.Therouter’sIPisdefinedintheIP Addressfield.ThedefaultsettingoftheDHCPserverissetto Enabledsothatnetworkedclients(computers,homeentertainmentcomponents,printers,etc.)willautomaticallybe
assignedIPaddressesbytherouter.
MoreadvancedusersmaywishtoconfiguretheDNSserver
settingstomeettheirspecificrequirements.Changingthe
settings in this section are not necessary for most situations.
ToviewtheLANsettings,clickSystem, then click LAN.
Note: Keep the router’s default values if you are uncertain of the settings values.
LAN IP IP AddressForconfiguringtherouter’sLANIPaddress.
IP Subnet MaskForconfiguringtherouter’sLANSubnetMask
802.1d Spanning TreeSpanningTreeisdisabledbydefault.Whenenabled,Spanning
Treepreventsnetworkloops(transmissionswon’tpassthe
samenodetwiceorseveraltimestoreachthedestination).
Note:
ThedefaultdeviceIPaddressis192.168.0.1.
![Page 42: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/42.jpg)
42
DHCP ServerTheDHCPserverassignsIPaddressestothedevicesontheLAN.
DHCP ServerEnableordisabletheDHCPserver(Default:Enabled).
Lease TimeConfiguretheamountoftimeeachallocatedIPaddresscanbe
usedbyaclient.
Start IPThefirstIPaddressintherangeofaddressesassignedbythe
router.
End IPThelastIPaddressintherangeofaddressesassignedbythe
router.
Domain NameThe domain name of the router.
![Page 43: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/43.jpg)
43
Configuring Dynamic Host Configuration ProtocolThiswindowallowsyoutoviewandconfigureDynamicHostConfigurationProtocol(DHCP)addresses.
WARNING! Donotmodifythesettingsinthissectionwithoutathoroughunderstandingoftheparameters.
ToviewtheDHCPsettings,clickSystem then click DHCP.
DHCP Client TableDisplaystheconnectedDHCPclientswhoseIPaddressesare
assignedbytheDHCPserveroftherouter.
IP AddressDisplaystheIPaddressofthestaticDHCPclientdevice
inthetable.
MAC AddressDisplaystheMACaddressofthestaticDHCPclientdevice
inthetable.
Expiration TimeThedateandtimewhenthecurrentDHCPaddress
is no longer valid.
ClickRefreshtoupdatethetable.
![Page 44: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/44.jpg)
44
Enable Static DHCP IP
TherearereasonswhyyoumaywanttoenableastaticIP
addressonaclientdeviceonyourESRrouter’snetwork.
Onoccasion,iftherearepoweroutagesorifyou’vereconfigured
thesettingsonyourESRrouterandreboot(restart)ittoapply
thenewsettings,thepreviousIPaddressthattherouter’sDHCP
serverassignedtooneormoredevicesonthenetworkmayhave
changed.Someclientdevicesonyournetworkmayalsohave
webconfigurationinterfaces(settopboxes,NetworkAttached
Storage,etc.)thatareaccessiblefromtherouter’sassigned
IPaddressfromitsDHCPserver,sotheclientdevicecanbe
managed. Thus if the client device’s IP address changes from
timetotime,itmaybedifficultlinkingtoitunlessyoufindits
newaddressthroughtheESRrouter’sDHCPClientTable.
Ifyouwishtoavoidthis,thentheEnableStaticDHCPIPoption
allowsyousetastatic(essentiallyapermanent)addressfor
givenclientdevicesonyournetwork.
To do so, select the Enable Static DHCP IP option.
IP AddressEntertheIPaddressofthedevicetoaddasastaticDHCPclient.
MAC AddressEntertheMACaddressofthedevicetoaddasastaticDHCP
client.
ClickAddtoaddthedevicetothestaticDHCPclienttableorReset toreturnthetabletoitspreviousstate.
![Page 45: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/45.jpg)
45
Current Static DHCP Table
AllowsyoutoviewtheactivestaticDHCPIPaddressesthat
havebeenmanuallyassignedtoclientdeviceswiththeir
correspondingMACaddresses.
No. (Number)DisplaystheIDofthestaticDHCPclientdeviceinthetable.
IP AddressDisplaystheIPaddressofthestaticDHCPclientdeviceinthe
table.
MAC AddressDisplaystheMACaddressofthestaticDHCPclientdeviceinthe
table.
SelectClicktoselectstaticDHCPclientdevicestobedeleted.
ClickDelete Selectedtoremoveaselectedaddress.ClickDelete All toremovealladdressesfromthetable.ClickReset to return
thetabletoitspreviousstate.ClickApply to save the settings or
Cancel to discard changes.
![Page 46: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/46.jpg)
46
Configuring Event LoggingThe logging service records and displays important system
informationandactivityonthenetwork.Theeventsarestoredin
amemorybufferwitholderdataoverwrittenbynewerwhenthe
bufferisfull.
ToviewtheLogsettings,clickSystem then click Log.
Log Message List
Select Enable Logging to Syslog Server ClickSave to start logging information to the system.
Log Message windowShowsthecurrentsystemoperationsandnetworkactivity.
ClickSavetosavethemessagelisttoatextfile,Clear to discard
messagefromthememorybuffer,orRefresh to clear previous
messagesandwritenewmessagestothememorybuffer.
ClickApply to save changes.
![Page 47: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/47.jpg)
47
Monitoring Bandwidth UsageThistoolallowsyoutoviewreal-timebandwidthusageforWAN
(WideAreaNetwork-orInternet),LAN(LocalAreaNetwork)and
WLAN(WirelessLocalAreaNetwork)traffic.FortheESR350,it
showsboththebandwidthtrafficinboththe2.4andfrequency
bands.
ToviewtheBandwidthMonitorsettings,clickSystem, then click
Monitor.
ThescreensdisplaytheactivebandwidthusageforboththeLAN
andWLANnetworksaswellasthebandwidthbeingusedonthe
WANconnection.
![Page 48: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/48.jpg)
48
Configuring the System Language
TheESRrouter’sWebConfigurationinterfacesupportsmultiple
languages.
ToviewtheLanguagesettings,clickSystem, then click
Language.
Selectthesystemlanguageyouwishtousefromthedrop-down
menu.
![Page 49: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/49.jpg)
49
Configuring IP CamerasThisESRroutersupportsuptofour(4)EnGeniusIPCameras
simultaneously.IfnoIPCameraisdetected,pleasecheckthatthe
IPCamera’sIPaddressandUPnPclientareconfiguredcorrectly.
ToviewtheIPCamerasettings,clickSystem, then click IP Camera.
Beforestartingthisprocedure,youmustconnectyourEnGenius
IPcameratothenetwork.
Makesurethecameraispoweredon.
ClicktheRefreshbuttontoviewalistingofavailabledevices.
Note:The"IPCamera"functionsupportsEnGeniusIPCameraproductsonly.
![Page 50: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/50.jpg)
50
Configuring Internet Settings
View Internet StatusTheWANSettings,orInternetStatus,pageshowsasummaryof
the current Internet connection information. This section is also
shownontheSystemStatuspage.
ToviewtheStatussettings,clickInternet, then click Status.
WAN SettingsToviewtheWANSettings,clickInternetthenselectStatus.
Attain IP ProtocolDisplaytheIPProtocoltypeusedfortheESRSeriesRouter
(DynamicIPAddressorStaticIPAddress).
IP AddressTherouter’sWANIPaddress.
Subnet MaskTherouter’sWANsubnetmask.
Default GatewayTheISP’sgatewayIPaddress.
MAC AddressTherouter’sWANMACaddress.Therouter’sMACaddressis
locatedonthelabelonthebacksideoftherouter.
Primary DNSTheprimaryDNSaddressofanISPprovider.
Secondary DNSThesecondaryDNSaddressofanISPprovider.
![Page 51: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/51.jpg)
51
Configuring Dynamic IPDynamicIPaddressingassignsadifferentIPaddresseachtime
adeviceconnectstoanISP(InternetServiceProvider)andmost
commonlyusedbycableISPs.
ToviewtheDynamicIP,clickInternet then select Dynamic IP.
Dynamic IP
HostnameAssignanamefortheInternetconnectiontype.Thisfieldcanbe
blank.
MTU (Maximum Transmission Unit)AllowsyoutoconfiguretheMTU.TheMTUspecifiesthelargest
packetsizepermittedforaninternettransmission.Thefactory
defaultMTUsizeforDynamicIP(DHCP)is1500.TheMTUsize
canbesetbetween512and1500.
Clone MACEntertheMACaddressofyourcomputer’s(ortablet’s)network
embeddedNetworkInterfaceCard(NIC)intheMACaddressfield
and click Clone MAC.
Note:SomeISPprovidersrequireregisteringtheMACaddressoftheNetworkInterfaceCard(NIC)connecteddirectlytothecableorDSLmodem.CloneMACmaskstherouter'sMACaddresswiththeMACaddressofthecomputer’sNIC.
![Page 52: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/52.jpg)
52
DNS ServersTheDNSservertranslatesadomainorwebsitenameintoaURL
(UniformResourceLocator),orInternetaddress.Therearetwo
optionstochoosefrom:FromISPorUser-Defined.SelectFromISPto
retrievetheDNSaddressvaluefromtheISP;selectUser-Definedto
assignacustomDNSserveraddress.
DNS Server
ConfigurethetypeofDNSserver.(Default=FromISP)
First DNS Server
Configurethefirst,orprimary,DNSserver.
Second DNS Server
Configurethesecond,orsecondary,DNSserver.
ClickApply to save the settings or Cancel to discard the changes.
![Page 53: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/53.jpg)
53
Configuring Static IPSettingastaticIPaddressallowsanadministratortoseta
specificIPaddressfortherouterandguaranteesthatitcannot
beassignedadifferentaddress.
ToviewtheStaticIPsettings,clickInternet, then click Static IP.
Static IP
IP AddressTherouter’sWANIPaddress.
Subnet MaskTherouter’sWANsubnetmask.
Default GatewayTheWANgatewayaddress.
Primary DNSTheprimaryDNSserveraddress.
Secondary DNSThesecondaryDNSserveraddress.
MTU (Maximum Transmission Unit)TheMTUspecifiesthelargestpacketsizepermittedforan
internettransmission.ThefactorydefaultMTUsizeforstaticIP
is1500.TheMTUsizecanbesetbetween512and1500.
MAC AddressTherouter’sMACaddress.
ClickApply to save the settings or Cancel to discard the
changes.
![Page 54: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/54.jpg)
54
Configuring PPPoEPoint-to-PointProtocoloverEthernet(PPPoE)isusedmainlyby
ISPsthatprovideDSLmodemstoconnecttotheInternet.
ToviewthePPPoEsettings,clickInternet, then click PPPoE.
UsernameEntertheusernameassignedbyanISP.
PasswordEnterthepasswordassignedbyanISP.
Service NameEntertheservicenameofanISP(optional).
MTU (Maximum Transmission Unit)Enterthe(MTU).TheMTUspecifiesthelargestpacketsize
permittedforaninternettransmission(PPPoEdefault:1492).
TheMTUsizecanbesetbetween512and1492.
Authentication TypeSelectthetypeofauthenticationprovidedbytheISP:Auto,PAP,
orCHAP.Ifunsureofthebestsetting,selectAutoorcheckwith
your Internet Service Provider.
TypeConfiguretheconnectiontypebetweentherouterandthe
ISP.Selectoneofthefollowing:Keep Connection, Automatic Connection or Manual Connection.
Idle TimeoutConfigurethemaximumidletime(1to1,000minutes)allowed
for an inactive connection.
Clone MACEntertheMACaddressofthedevices’networkinterface
card(NIC)intheMACaddressfieldandclickCloneMAC.
Note: SomeISPprovidersrequireregisteringtheMACaddressofthenetworkinterfacecard(NIC)connecteddirectlytothecableorDSLmodem.CloneMACmaskstherouter’sMACaddresswiththeMACaddressofthecomputer’sNIC.
ClickApply to save the settings or Cancel to discard the
changes.
![Page 55: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/55.jpg)
55
Configuring PPTPPPTP(Point-to-PointTunnellingProtocol)isusedinassociation
withvirtualprivatenetworks(VPNs).Therearetwopartsto
aPPTPconnection:theWANinterfacesettingsandthePPTP
settings.
ToviewthePPTPsettings,clickInternet, then click PPTP.
WAN Interface Settings
Dynamic IP AddressWAN Interface TypeSelectDynamicIPAddresstoassignanIPaddressprovidedbyan
ISP.
HostnameEnterahostnameofanISP.(optional).
Clone MACEntertheMACaddressofthecomputer’s(ortablet’s)embedded
NetworkInterfaceCard(NIC)intheMACaddressfieldandclick
Clone MAC.
Note: SomeISPprovidersrequireregisteringtheMACaddressofthenetworkinterfacecard(NIC)connecteddirectlytothecableorDSLmodem.CloneMACmaskstherouter’sMACaddresswiththeMACaddressofthecomputer’sNIC.
![Page 56: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/56.jpg)
56
PPTP Settings
User NameEntertheusernameassignedbyyourISP.
PasswordEnterthepasswordassignedbyyourISP.
Service IP AddressEnterthePPTPserverIPaddressprovidedbyyourISP.
Connection IDEntertheconnectionIDprovidedbyyourISP(optional).
MTU (Maximum Transmission Unit)EnterMTU.TheMTUspecifiesthelargestpacketsize(Default:
1462)permittedforanInternettransmission.TheMTUsizecan
besetbetween512and1492.
TypeConfiguretheconnectiontypebetweentherouterandthe
ISP.Selectoneofthefollowing:Keep Connection, Automatic Connection or Manual Connection.
Idle TimeoutConfigurethemaximumamountoftime,inminutes,allowedfor
inactiveInternetconnection.TheInternetconnectionwillbe
droppedwhenthemaximumidletimeisreached.Validvaluesare
betweenoneandonethousand.
ClickApply to save the settings or Cancel to discard the changes.
![Page 57: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/57.jpg)
57
Configuring L2TPL2TP(Layer2TunnelingProtocol)isusedinassociationwith
VPNs(VirtualPrivateNetworks).TherearetwopartstoaL2TP
connection:
1.TheWANinterfacesettings
and
2. The L2TP settings.
ToviewtheL2TPsettings,clickInternet, then click L2TP.
WAN Interface Settings
Dynamic IP Address
WAN Interface TypeSelectDynamicIPAddresstoassignanIPaddressprovidedbyan
ISP.
HostnameEnterahostnameofanISP(optional).
Clone MACEntertheMACaddressofyourcomputer’sembeddedNetwork
InterfaceCard(NIC)intheMACaddressfieldandclickClone MAC.
Note: SomeISPprovidersrequireregisteringtheMACaddressofthenetworkinterfacecard(NIC)connecteddirectlytothecableorDSLmodem.CloneMACmaskstherouter’sMACaddresswiththeMACaddressofthecomputer’sNIC.
![Page 58: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/58.jpg)
58
L2TP Settings
UsernameEntertheusernameassignedbyanISP.
PasswordEnterthepasswordassignedbyanISP.
Service IP AddressEntertheL2TPserverIPaddressprovidedbyanISP.
Connection IDEntertheconnectionIDprovidedbyanISP(optional).
MTU (Maximum Transmission Unit)EnterMTU.TheMTUspecifiesthelargestpacketsize(Default:
1460)permittedforanInternettransmission.TheMTUsizecan
besetbetween512and1492.
TypeConfiguretheconnectiontypebetweentherouterandthe
ISP.Selectoneofthefollowing:Keep Connection, Automatic Connection or Manual Connection.
Idle TimeoutConfigurethemaximumamountoftime,inminutes,allowedfor
inactiveInternetconnection.TheInternetconnectionwillbe
droppedwhenthemaximumidletimeisreached.Validvaluesare
betweenoneandonethousand.
ClickApply to save the settings or Cancel to discard the changes.
![Page 59: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/59.jpg)
59
Configuring DS-LiteSingle-StackLite,orDS-Lite,allowsISPstostopIPv4addresses
fromreachingacustomer’snetworkdevicesandonlyuseIPv6.
ToviewtheDS-Litesettings,clickInternet, then click DS-Lite.
DS-Lite ConfigurationSelectDS-LiteDHCPv6OptionorManualConfiguration
AFTR IPv6 AddressEnter the AFTR IPv6 connection type
B4 IPv4 AddressEnteranOptionalB4IPv4address.
WAN IPv6 AddressEntertheWANIPv6address.
IPv6 WAN Default GatewayEntertheIPv6WANdefaultgatewayaddress.
ClickApply to save the settings or Cancel to discard the changes.
![Page 60: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/60.jpg)
60
Wireless LAN Setup
ToviewtheWirelessBasicsettings,clickWireless then select
Basic.
RadioEnableordisablethewirelessradio.Ifthewirelessradiois
disabled,wirelessaccesspointsarenotavailable.
ModeSelectthewirelessoperatingmodefortherouter.Twomodes
areavailable:AccessPointorWirelessDistributionSystem(WDS)
mode.
AP (Access Point)Providesaconnectionaccesspointforwirelessdevices.
WDS (Wireless Distribution System)Allowsthewirelessnetworktobeexpandedusingmultiple
accesspointswithoutwiredconnections.
ClickApply to save the settings or Cancel to discard changes.
![Page 61: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/61.jpg)
61
Access Point ModeTheseinstructionsapplytoboththe2.4GHzandfrequencybands.
TherouterbydefaultisalreadyconfiguredinAccessPointMode.Foroptimumconnectivitytoanumberofdifferentwirelessclient
devices,it’srecommendedthatyoukeeptherouterinitsdefaultwirelesssettings.Youcanchoosetohavetherouterassociate
onlywithcertainiterations(IEEEstandards)andbydoingsothiswilleitherpositivelyornegativelyaffecttherouter’sspeedand
throughput performance.
BandSelectawirelessstandardforthenetworkfromthefollowing
options:
• 2.4GHz(IEEE802.11b)
• 2.4GHz(IEEE802.11n)
• 2.4GHz(IEEE802.11b/g)
• 2.4GHz(IEEE802.11g)
• 2.4GHz(IEEE802.11b/g/n)
Enable SSID#Selectthenumberofwirelessgroups,betweenoneandfour,
availableonthenetwork.
SSID[#]Enterthenameofthewirelessnetwork(s).
Auto ChannelEnableordisablehavingtherouterautomaticallyselecta
channelforthewirelessnetwork.AutoChannelisenabledby
default.Selectdisabletomanuallyassignaspecificchannel.
(Default=Disable)
Check Channel TimeWhenAutoChannelisenabled,selectatimeperiodthatthe
system checks the appropriate channel for the router.
ChannelWhenAutoChannelisdisabled,selectachanneltoassignto
thewirelessnetwork.Validvaluesarefromonetoelevenin
the US and one to thirteen in the EU.
![Page 62: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/62.jpg)
62
Wireless Distribution System ModeConfiguringtherouter’swirelesssettingsforWDS(WirelessDistributionSystem)mode.
ChannelSelectachanneltoassigntothewirelessnetwork.Validvalues
are from one to eleven in the US and one to thirteen in the EU.
MAC Address [#]EntertheMACaddress(es)forthewirelessaccesspoint(s)
thatarepartoftheWDS.
WDS Data RateSelectthedataratefortheWDS.
Set SecurityClickSetSecuritytosetuptheWDSsecuritysettingsscreen.
![Page 63: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/63.jpg)
63
WDS Security Settings ScreenSelectingthetypeofWDSencryption(Disable,WEPorWPAPre-
SharedKey)forthewirelessnetwork.
Wired Equivalent Privacy (WEP)
Key LengthSelectbetween64-bitand128-encryption.
Key FormatSelectthetypeofcharactersusedfortheWEPKey:ASCII
(5characters)orHexadecimal(10characters).
Default KeySelectthedefaultencryptionkeyforwirelesstransactions.
Encryption Key [#]Entertheencryptionkey(s)usedtoencryptthedatapackets
during data transmission.
![Page 64: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/64.jpg)
64
Chapter5 Wireless Encryption
![Page 65: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/65.jpg)
65
Wi-Fi Protected Access (WPA) Pre-Shared Key
WPA TypeSelectthetypeofWPA.
• WPATemporalKeyIntegrityProtocol(TKIP):Generates
a128-bitkeyforeachpacket.
• WPA2AdvancedEncryptionStandard(AES):
Governmentstandardpacketencryptionwhichis
stronger than TKIP.
Pre-Shared Key TypeSelectthetypeofpre-sharedkeyasPassphrase(ASCII)orHexadecimal.
Pre-Shared KeyEnterthepre-sharedKeyvalue.
![Page 66: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/66.jpg)
66
Configuring SecurityEnablingsecurityoptionsonthewirelessnetworktoprevent
intrusionstosystemsonthewirelessnetwork.
ToviewtheSecuritysettings,clickWireless then select
Security.
SSID SelectionSelectthewirelessnetworkgroupinwhichyouwishtochange
itswirelesssecuritysettings.
Broadcast SSIDEnableordisablebroadcastSSID.Choosewhetherornotthe
wirelessgroupisvisibletoothermembers.
Wi-Fi Multimedia (WMM)Enableordisablequalityofserver(QoS)tooptimizethe
streamingforbandwidthsensitivedatasuchasHDTVvideo
streaming, online gaming, VoIP, videoconferencing, and etc.
EncryptionSelect the encryption type for the router.
Enable802.1xAuthentication
Enableordisable802.1xauthentication.
![Page 67: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/67.jpg)
67
ClickApply to save the settings or Cancel to discard the changes.
Wi-Fi Protected Access (WPA) Pre-Shared Key
WPA TypeSelectthetypeofWPAfromthefollowing:
• WPA2 Advanced Encryption Standard (AES): RECOMMENDED—GovernmentstandardpacketencryptionwhichisstrongerthanTKIP.
• WPA Temporal Key Integrity Protocol(TKIP):Generatesa128-bitkeyforeachpacket.
• WPA2 Mixed: MixedmodeallowsclientdevicestofirstassociatetotherouterusingWPA2,andiftheyfailto
connect,thentheyareconnectedviaWPA(TKIP).
Encryption TypeEnablingencryptionisstronglyencouragedbecauseunauthorizedpartieswithinrangeofyourrouter’swirelesssignalmayattempt
toaccessyourwirelessnetworkandthengainaccesstoprivateinformationondevicesonyournetwork.It’shighlyrecommended
thatyouencryptyourrouterwithWPA2(AES)foroptimalsecurityandthroughputperformance.Alwaysselectastrongpassphrase
greaterthan8characterslongandcomprisedofletters,numbers,andsymbols.Pleasemakenoteofthepassphraseandkeepitina
securelocationsomewhereinyourhomeincaseyouneedtoretrieveit.
Pre-Shared Key TypeSelectthetypeofpre-sharedkeyasPassphrase(ASCII)or
Hexadecimal.
Pre-Shared KeyEnterthePre-sSharedKeyvalue.
IMPORTANT! WPA2(AES)offersmuchstrongersecuritythanWEP(WiredEquivalentPrivacy)whichhasbeenandcanbecomprimised.
![Page 68: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/68.jpg)
68
WPA RADIUSUsingaRADIUSservertoauthenticatewirelessstationsand
provide a session key to encrypt data during communications.
WPA TypeSelect the type of Wireless Protected Access (WPA) from the
following:
• WPA2 Advanced Encryption Standard (AES): RECOMMENDED—GovernmentstandardpacketencryptionwhichisstrongerthanTKIP.
• WPA Temporal Key Integrity Protocol(TKIP):Generatesa128-bitkeyforeachpacket.
• WPA2 Mixed: MixedmodeallowsclientdevicestofirstassociatetotherouterusingWPA2,andiftheyfailto
connect,thentheyareconnectedviaWPA(TKIP).
RADIUS Server IP AddressEnter the IP address of the server.
RADIUS Server PortEntertheportnumberoftheserver.
RADIUS Server PasswordEnterthepasswordoftheserver.
![Page 69: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/69.jpg)
69
Wired Equivalent Privacy (WEP)
Authentication TypeSelectthetypeofauthenticationfromthefollowing:
• Open System: WirelessstationscanassociatewiththerouterwithoutWEPencryption
• Shared Key: DevicesmustprovidethecorrespondingWEPkey(s)whenconnectingtotherouter
• Auto: TherouterautomaticallydetectswhetherOpenSystemorSharedKeyisbeingused
Key LengthSelectbetween64-bitand128-encryption.
Key TypeSelectthetypeofcharactersusedfortheWEPKey:ASCII
(5characters)orHexadecimal(10characters).
Encryption Key [#]Entertheencryptionkey(s)usedtoencryptthedatapackets
during data transmission.
Enable 802.1x AuthenticationEnableordisable802.1xauthentication.
![Page 70: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/70.jpg)
70
Configuring Filters
WhenEnableWirelessAccessControlisselected,onlywirelessclientswithMACaddresseslistedinthetableareallowedtoconnect
tothewirelessnetwork.
ToviewtheFiltersettings,clickWireless then select Filter.
Enabling Wireless Access ControlSelect“EnableWirelessAccessControl”
DescriptionEnter a description of the device
allowedtoconnecttothenetwork.
MAC AddressEntertheMACAddressofthe
wirelessdevice.
ClickAdd toappendanewdeviceto the list or Reset to discard changes.
WARNING! Incorrectlychangingthesesettingsmaycausethedevicetostopfunctioning.Donotmodifythesettingsinthissectionwithoutathoroughunderstandingoftheparameters.
![Page 71: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/71.jpg)
71
MAC Address Filtering Table
No. (Number)Thesequencenumberofthedevice.
DescriptionThe description of the device.
MAC AddressTheMACaddressofthedevice.
SelectIndicatesthedevice(s)thatcanhaveactionsperformedon
them.
ClickDelete Selected to remove selected devices from the list.
ClickDelete All to remove all devices from the list.
ClickResettodiscardchanges.ClickApply to save the settings or
Cancel to discard changes.
![Page 72: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/72.jpg)
72
Configuring Wi-Fi Protected SetupWi-FiProtectedSetup(WPS)isanquickandeasywaytoassociateanewwirelessclientdevicetotheencryptedrouterusingaPINor
theWPSbuttonsoneachdevice.
ToviewtheWPSsettings,clickWireless then select WPS.
WPSEnableordisableWPS.
WPS Current StatusDisplayswhetherornotthe
wirelesssecurityisconfigured.
Self Pin CodeAn8-digitPINwhichisrequired
whenconfiguringtherouter
forthefirsttimeinWindows7orVista.
SSIDThenameofthewirelessnetwork.
Authentication ModeThe current security settings for the
correspondingSSID(wirelessnetwork).
Passphrase KeyArandomlygeneratedkeycreatedby
therouterduringtheWPSprocess.
WPS via Push ButtonClick“Start to Process”toactivateWPS.
WPS via PINEnter the PINofawirelessdeviceclick“Start to Process” to
activateWPS.
![Page 73: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/73.jpg)
73
Configuring Client ListViewthewirelessdevicescurrentlyconnectedtotherouter.
ToviewtheClientListsettings,clickWirelessthenselectClient
List.
InterfaceThetypeofnetworkconnectedtothedevice.
MAC AddressTheMACaddressofdeviceconnectedtonetwork.
SignalThesignalstrengthofthedeviceconnectedtothenetwork.
Idle TimeTheamountoftimetheconnecteddevicehasnotbeenactiveon
thenetwork.
ClickRefreshtorefillthelistwithcurrentlyconnecteddevices.
![Page 74: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/74.jpg)
74
Chapter6 Advanced Settings
![Page 75: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/75.jpg)
75
Configuring Advanced SettingsAllowsyoutodefinetheAdvancedSettingsavailableontherouter.
ToviewtheAdvancedsettings,clickWireless then select Advanced.
Fragment ThresholdEnterthemaximumsizeofapacketduringdatatransmission.
Avaluetoolowcouldleadtolowperformance.
RTS ThresholdEntertheRTSthreshold.Ifthepacketsizeissmallerthanthe
RTSthreshold,therouterdoesnotuseRTS/CTStosendthe
data packet.
Beacon IntervalEnterthebeaconinterval.Thisistheamountoftimethatthe
routersetstosynchronizethenetwork.
Delivery Traffic Indication Message (DTIM) PeriodEntertheDTIMperiod.TheDTIMisacountdownperiodinformingclientsofthenextpoint
ofbroadcastandmulticastofmessagesoverthenetwork.Validvaluesarebetween1and255.
N Data RateSelecttheNdatarate.ThisistherateinwhichtheESRSeriesRouterwilltransmitdatapacketstowirelessNcompatibledevices.
WARNING!Incorrectlychangingthesesettingsmaycausethedevicetostopfunctioning.Donotmodifythesettingsinthissectionwithoutathoroughunderstandingoftheparameters.
![Page 76: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/76.jpg)
76
Channel BandwidthSelectthechannelbandwidth.ThefactorydefaultisAuto20/40MHz.Thedefaultsettingprovidesthebestperformancebyauto
selectingchannelbandwidth.
Preamble TypeSelectthepreambletype.LongPreambleprovidesbetterLANcompatibilityandShortPreambleprovidesbetterwirelessperformance.
CTS ProtectionSelectthetypeofCTSprotection.UsingCTSProtectioncanlowerthedatacollisionsbetweenWirelessB(802.11b)andWirelessG
(802.11g)devicesandlowerdatathroughput.
Tx PowerSelectthewirelesssignalstrengthlevel.Validvaluesarebetween25%and100%.
ClickApply to save the settings or Cancel to discard changes.
![Page 77: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/77.jpg)
77
Setting Up Parental ControlsOffensivewebcontentcanbeblockedwhenaparentspecifieskeywords.ParentscanalsolimitInternetaccesswithinaspecified
timeandday,withaSchedule. A PolicyisaruleprofilewhichdescribesthekeywordfilterandInternetaccessschedule.Parentscanapply the policy to multiple users or Policy Members.TheParentalControlstoolwillscreenpolicymembersbasedonappliedpolicies.
Configuring the Access Control ListToviewtheACLsettings,clickFirewall then select ACL.
Viewing the Access Control ListTolearnhowtoviewexistingaccesscontrollist,refertoViewing Parental Policies.
Adding a Control PolicyTolearnhowtocreateandaddapolicytotheaccess
control list, refer to Adding a Control Policy.
ToviewtheWizard settings,
click Parental Control then select Wizard.
Enable Parental Control (Access Control)ClicktoenableParentalControl.
Add PolicyClickthebuttontoaddanewcontrolpolicytothe
network.
Policy TableShowsthecontrolpoliciesavailableonthenetwork.
ClickApply to save changes or Cancel to discard them.
Note:Bydefault,everyoneisallowedtoviewallthecontentswithoutanylimitationandfilter.
![Page 78: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/78.jpg)
78
Adding a Control PolicyTherouterprovidesawizardtoguideyouthroughsettingupa
newAccessControlPolicy.
To start the procedure, click the Add Policybutton.
ClickNext to continue the procedure or Cancel to stop the
procedure.
Theprocedureconsistsofthefollowingsteps:
1.EnterauniquenameforyourpolicyinthePolicyName
textfield.
2.ClickPrevtoreturntothepreviousscreen,Nexttocontinue
theprocedure,orCanceltostoptheprocedure.
3. Add target devices to the access control policy.
![Page 79: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/79.jpg)
79
5. Setting up a schedule for the router services.
To set up a Service Schedule,followthesesteps: a. Select Allow from the Schedule option.
b.Clickthedaysthattheschedulewillbeactive.
c.Enterthetimeperiodthattheschedulewillbeactive.
6.ClickPrev to return to the previous screen, Next to continue
the procedure, Save to save the changes, or Cancel to stop
the procedure.
To add a device to the Member List, follow these steps:
a.ClickMAC or IP from the Filter Type option.
b.ClickAddtoshowtheaddclientdialog. c. Enter the name of the device in the Device Nametextfield.
d.EntereitheraMACaddressoranIPaddressintheAddress
fielddependinguponwhichfiltertypeyouchose.
e.ClicktheAdd Device Button to close the screen and
addthedevicetotheMemberList.
4.ClickPrev to return to the previous screen, Next to continue
the procedure, Save to save the changes, or Cancel to stop
the procedure.
![Page 80: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/80.jpg)
80
7.SetupakeywordandURLfilterlist.
Tosetupakeyword/URLfilterlist,followthesesteps:
a. Select Allow from the Filtering option.
b.EnterakeywordorURLintheURL/Keyword text field. c.ClicktheAddbuttontoaddthefiltertothelist. d. Repeat steps a through cforeachfilter.
8.ClickEnable Application Filtertofiltersoftwareapplications.
9.ClickPrev to return to the previous screen, Next to continue
the procedure, Save to save the changes, or Cancel to stop
the procedure.
10.SelectEnabletosavewebaccessinformationtoalogfileor Disable to ignore the information.
11.ClickPrev to return to the previous screen, Save to save the
changes, or Cancel to stop the procedure.
![Page 81: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/81.jpg)
81
Viewing Parental PoliciesAvailableparentalcontrolpoliciesareshowninatableandeachpolicycanbeenabledordisabled,edited,anddeleted.
ToviewtheWebsettings,clickParental Control then select Web Monitor.
EnableClicktoenableordisablethecontrolpolicy.
Policy NameShowsthecontrolpolicyname.
Target DeviceShowsthetargetdeviceMACaddressorIPaddress.
ScheduleShowsthecontrolpolicyschedule.
LoggedShowswhetherthecontrolpolicyisstoring
log information.
ModifyEditapolicybyclickingtheEdit Button.
DeleteapolicybyclickingtheDelete Button.
![Page 82: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/82.jpg)
82
Guest NetworkTheGuestNetworkfunctionenablesyoutoofferInternetconnectivitytovisitorsorguestswhilekeepingothernetworkeddevices
(computersandharddrives)andsensitivepersonalorcompanyinformationprivateandsecure.
TheGuestNetworkiscontrolledbytheWirelessSSIDfunction.WhentheGuestNetworkfunctionisenabled,theGuestSSIDcan
onlygettheinternetconnectionfromWAN,butcannotreachtheclientfromtheLANport.
Enabling the Guest NetworkToviewtheSelectionsettings,clickGuest Network then select Selection.
Guest NetworkEnableorDisabletheGuestNetwork
function
Client IsolationGuestclientsareisolatedandcannot
communicatewitheachother.
SSIDChooseaSSIDfortheGuestNetwork
used.TheSSIDcanbedefinedfromtheWirelesssettingpage.
ClickApply to save the settings or Cancel to discard changes.
![Page 83: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/83.jpg)
83
Configuring the DHCP Server SettingTheGuestNetworkSSIDshouldbeonadifferentsubnetfromtherouter’sDHCPserver.
ToviewtheDHCPServerSettings,clickGuest Network then select DHCP Server Setting.
Router IP addressDefinetherouterIPaddress
fortheGuestnetwork.
Default Subnet MaskDefinetheSubnetMaskIP
addressfortheGuest
network.
Start IPTodefinetheGuestnetworkDHCPserverstartIP.
End IPTodefinetheGuestnetworkDHCPserverendIP.
ClickApply to save the settings or Cancel to discard changes.
![Page 84: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/84.jpg)
84
Viewing the DHCP Client List on the Guest NetworkShowsthelistofguestclientsregisteredonthenetwork.
ToviewtheDHCPClientListsettings,clickGuest Network then select DHCP Client List.
DHCP Client TableShowstheIPaddress,
MACaddress,and
expirationtimeofeach
of the registered clients
on the list.
IP AddressThe IP address of the guest client.
MAC AddressTheMACaddressoftheguestclient.
Expiration TimeThetimethattheguestclient’sDHCPaddresswillexpireandmustberenewed.
ClickRefreshtorefreshtheviewofthelist.
![Page 85: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/85.jpg)
85
IPv6Thereareseveralconnectiontypestochoosefrom:AutoDetection,StaticIPv6,Autoconfiguration(SLAAC/DHCPv6),PPPoE,IPv6
inIPv4Tunnel,6to4,andLink-local.Ifyouareunsureofyourconnectionmethod,pleasecontactyourIPv6InternetServiceProvider.
Enabling IPv6 SettingsToviewtheBasicsettings,clickIPv6thenselectBasic.
BeforeusingorconfiguringtheIPv6protocol,orIPv6passthrough,onanESRSeriesRouteryoumustenableit.
IPv6SelectenabletoconfiguretheIPv6protocolontherouter.
IPv6 PassthroughSelectenabletoallowIPv6passthroughfunctionality.
IPv6mustbedisabledtoenablethisfeature.
ClickApply to save the settings or Cancel to discard changes.
Note:IfyouareusingthePPPoEoption,youwillneedtoensurethatanyPPPoEclientsoftwareonyourcomputershasbeenremovedordisabled.
![Page 86: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/86.jpg)
86
Viewing the IPv6 Connection StatusToviewtheStatusinformation,clickIPv6thenselectStatus.
IPv6 Connection InformationShowstheIPv6connectiontype,theLANIPv6link-localaddressandtheDHCP-PD.
LAN IPv6 Computers ListShowsalistofnetworkcomputersandtheirIPv6connectioninformation.
![Page 87: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/87.jpg)
87
Configuring Static IPv6ToviewtheStaticIPv6settings,clickIPv6 then select Static IPv6.
Use Link-Local AddressEnableordisableLANlink-localaddress.
IPv6 AddressEntertheLAN(local)IPv6addressfortherouter.
Subnet Prefix LengthEnterthesubnetprefixlength.
Default GatewayEnterthedefaultgateway.
Primary IPv6 DNS AddressEntertheprimaryIPv6DNSaddress.
Secondary IPv6 DNS AddressEnterthesecondaryIPv6DNSaddress.
LAN IPv6 AddressEntertheLANIPv6address.
LAN IPv6 Link-Local AddressEntertheLANIPv6link-localaddress.
Enable Automatic IPv6 Address AssignmentEnableordisableautomaticIPv6addressassignment.
Autoconfiguration TypeEntertheautoconfigurationtype.(Default:SLAAC+RDNSS).
Router Advertisement LifetimeEntertheIPv6AddressLifetime(inminutes).
ClickApply to save the settings or Cancel to discard changes.
![Page 88: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/88.jpg)
88
Setting AutoconfigurationToviewtheAutoConfigurationsettings,clickIPv6 then select Auto Configuration.
Obtain A DNS Server Address AutomaticallyEnableordisableobtainingaDNSserver
automatically.
Primary IPv6 DNS AddressEntertheprimaryIPv6DNSaddress.
Secondary IPv6 DNS AddressEnterthesecondaryIPv6DNSaddress.
Enable DHCP-PDEnableordisableDHCP-prefixdelegation(PD).
LAN IPv6 AddressEntertheLANIPv6address.
LAN IPv6 Link-Local AddressEntertheLANIPv6link-localaddress.
Enable Automatic IPv6 Address AssignmentEnableordisableautomaticIPv6addressassignment.
Autoconfiguration TypeEntertheautoconfigurationtype.(Default:SLAAC+RDNSS)
Router Advertisement LifetimeEntertheIPv6AddressLifetime(inminutes).
ClickApply to save the settings or Cancel to discard changes.
![Page 89: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/89.jpg)
89
Configuring PPPoEToviewthePPPoEsettings,clickIPv6 then select PPPoE.
Address ModeSelectStaticifyourISPassignedyoutheIPaddress,subnet
mask,gateway,andDNSserveraddresses.Inmostcases,select
Dynamic.
IP AddressEntertheIPaddress(StaticPPPoEonly).
User NameEnter your PPPoE user name.
PasswordEnteryourPPPoEpassword.
Verify PasswordRetypetheyourPPPoEpassword.
Service NameEntertheISPServiceName(optional).
Reconnect ModeSelecteitherAlways-on,On-Demand,orManual.
Maximum Idle TimeEnteramaximumidletimeduringwhichthe
Internet connection is maintained during inactivity.
Todisablethisfeature,enableAuto-reconnect.
MTUMaximumTransmissionUnit-youmayneedtochangetheMTU
foroptimalperformancewithyourspecificISP.1492isthe
defaultMTU.
![Page 90: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/90.jpg)
90
Obtain A DNS Server Address AutomaticallyEnableordisableobtainingaDNSserverautomatically.
Primary IPv6 DNS AddressEntertheprimaryIPv6DNSaddress.
Secondary IPv6 DNS AddressEnterthesecondaryIPv6DNSaddress.
Enable DHCP-PDEnableordisableDHCP-prefixdelegation(PD).
LAN IPv6 AddressEntertheLANIPv6address.
LAN IPv6 Link-Local AddressEntertheLANIPv6link-localaddress.
Enable Automatic IPv6 Address AssignmentEnableordisableautomaticIPv6addressassignment.
Autoconfiguration TypeEntertheautoconfigurationtype.(Default:SLAAC+RDNSS)
Router Advertisement LifetimeEntertheIPv6AddressLifetime(inminutes).
ClickApply to save the settings or Cancel to discard changes.
![Page 91: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/91.jpg)
91
Configuring 6to4Toviewthe6to4settings,clickIPv6 then select 6to4.
6to4 AddressEnterthe6to4IPaddress.
Primary IPv6 DNS AddressEntertheprimaryIPv6DNSaddress.
Secondary IPv6 DNS AddressEnterthesecondaryIPv6DNSaddress.
LAN IPv6 AddressEntertheLANIPv6address.
LAN IPv6 Link-Local AddressEntertheLANIPv6link-localaddress.
Enable Automatic IPv6 Address AssignmentEnableordisableautomaticIPv6address
assignment.
Autoconfiguration TypeEntertheautoconfigurationtype.(Default:SLAAC+RDNSS)
Router Advertisement LifetimeEntertheIPv6AddressLifetime(inminutes).
ClickApply to save the settings or Cancel to discard changes.
![Page 92: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/92.jpg)
92
Viewing Local ConnectionsToviewtheLinkLocalsettings,clickIPv6 then select Link Local.
LAN IPv6 Link-Local AddressEntertheLANIPv6link-localaddress.
ClickApply to save the settings or Cancel to discard changes.
![Page 93: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/93.jpg)
93
Firewall Setup
Configuring Basic SettingsToviewtheBasicsettings,clickFirewallthenselectBasic.
TheESRSeriesRouterfirewallautomaticallydetectsandblocksDenialofService(DoS)attacks.URLblocking,packetfilteringand
statefulpacketinspection(SPI)arealsosupported.Thedetailsoftheattackandthetimestamparerecordedinthesecuritylog.
FirewallEnableordisablethefirewalloftheESRSeriesRouter.
ClickApply to save the settings or Cancel to discard changes.
Note:ThissectionappliestoClientRoutermode.
![Page 94: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/94.jpg)
94
Configuring Advanced SettingsTheroutersupportsVPNpass-throughwhichallowsvirtualprivatenetworking(VPN)packetstopassthroughthefirewall.
ToviewtheAdvancedsettings,clickFirewallthenselectAdvanced.
VPN L2TP Pass-throughClickSelecttoallowanL2TPconnectionmethod
overaVPN.
VPN PPTP Pass-throughClickSelecttoallowaPPTPconnectionmethod
overaVPN.
VPN IPSec Pass-throughClickSelecttoallowanIPSecconnectionmethodoveraVPN.
IPv6 Pass-throughClickSelecttoallowIPv6packetstopassthroughthefirewall.
PPPoE Pass-throughClickSelecttoallowaPPPoEpacketstopassthroughthefirewall.
ClickApply to save the settings or Cancel to discard changes.
Note: VPNL2TPPass-through,VPNPPTPPass-through,andVPNIPSecPass-throughareenabledbyfactorydefault.
![Page 95: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/95.jpg)
95
VPN L2TP Pass-throughClickSelecttoallowanL2TPconnectionmethodoveraVPN.
VPN PPTP Pass-throughClickSelecttoallowaPPTPconnectionmethodoveraVPN.
VPN IPSec Pass-throughClickSelecttoallowanIPSecconnectionmethodoveraVPN.
IPv6 Pass-throughClickSelecttoallowIPv6packetstopassthroughthefirewall.
PPPoE Pass-throughClickSelecttoallowPPPoEpacketstopassthroughthefirewall.
ClickApply to save the settings or Cancel to discard changes.
Note: VPNL2TPPass-through,VPNPPTPPass-through,andVPNIPSecPass-throughareenabledbyfactorydefault.
![Page 96: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/96.jpg)
96
Configuring Demilitarized ZoneConfiguringadeviceontheLANasaDemilitarizedZone(DMZ)hostallowsunrestrictedtwo-wayInternetaccessforInternet
applications,suchasonlinevideogames,torunfrombehindtheNATfirewall.TheDMZfunctionallowstheroutertoredirectall
packetsgoingtotheWANportIPaddresstoaparticularIPaddressontheLAN.Thedifferencebetweenthevirtualserverandthe
DMZfunctionisthatavirtualserverredirectsaparticularserviceorInternetapplication,suchasFTP,toaparticularLANclientor
server,whereasaDMZredirectsallpackets,regardlessoftheservice,goingtotheWANIPaddresstoaparticularLANclientorserver.
ADMZhostallowsacomputertohaveallitsconnectionsandportscompletelyopenduringdatatransmission.
ToviewtheDMZsettings,clickFirewall then select DMZ.
Enabling DMZClickEnableDMZtoactivateDMZfunctionality.
Local IP AddressEnteranIPaddressofadeviceontheLAN.
ClickApply to save the settings or Cancel to discard changes.
WARNING!ThePCdefinedasaDMZhostisnotprotectedbythefirewallandisvulnerabletomaliciousnetworkattacks.DonotstoreormanagesensitiveinformationontheDMZhost.
![Page 97: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/97.jpg)
97
Configuring Denial of ServiceToenableblockingofdenialofservice(DoS)attacks,selecttheDoSoptionintheFirewallsection.DoSattackscanfloodtheInternet
connectionwiththecontinuoustransmissionofdata.BlockingtheseattacksensuresthattheInternetconnectionisalwaysavailable.
ToviewtheDoSsettings,clickFirewall then select DoS.
Block DoSEnableordisableblockingDoSattacks.
Discard Ping on WANICMP(ping)packagesareblocked
whileBlockDoSisenabled.
EnableDiscardPingonWANiftheWANportisrequired.
ClickApply to save the settings or Cancel to discard changes.
![Page 98: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/98.jpg)
98
Virtual Private Network SetupAVirtualPrivateNetwork(VPN)providesasecureconnectionbetweentworemotelocationsortwousersovertheInternet.It
providesauthenticationtosecurelyencryptdatacommunicatedbetweenthetworemoteendpoints.TheShortModelNamesupports
upto5VPNtunnels,makingitidealforsmall-office/home-officeusersoremployeeswhoworkfromhomebutneedtocommunicate
securelybacktothemainoffice.
Viewing StatusToviewtheStatussettings,clickVPN then select Status.
No. (Number)ThesequencenumberoftheVPNtunnel.
NameThenameoftheVPNtunnel.
TypeThetypeofVPNtunnel.
Gateway/Peer IP AddressTheVPNgatewayorpeerIPaddress.
Transmit PacketsThenumberofpacketstransmitted.
Received PacketsThenumberofpacketsreceived.
UptimeTheamountoftimetheVPNhasbeenactive.
SelectIndicatesthedevice(s)thatcanhaveactionsperformedonthem.
![Page 99: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/99.jpg)
99
Configuring a VPN Tunnel ProfileToviewtheStatussettings,clickVPNthenselectStatus.
ManuallyconfigureaVPNtunnelprofile.
Creating a Profile
• ClickAdd tocreateanewVPNtunnelprofile.• ClickEdittoeditthesettingsoftheselectedprofile.• ClickDelete Selectedtodeletetheselectedprofile.• ClickDelete All todeleteallcurrentprofiles.
![Page 100: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/100.jpg)
100
GeneralFormanuallyconfiguringaVPNtunnelprofile.
Name: Enterthenameforthisprofile.
Connection Type: Clickthedrop-downmenutoselecttheconnectiontype(PPTP,L2TP,IPSec,L2TPoverIPSec).
Authentication Type:Clickthedrop-downmenutoselecttheauthentication type.
Shared Key:Enterthesharedkeytobeusedforthisprofile.
Confirm: Enterthesharedkeyasecondtimetoconfirmtheshared key.
Local ID Type:Clickthedrop-downmenutoselectthetypeofIDusedforthisprofile(IPaddress,DomainName,Email
Address).
Local ID: EnterthelocalIDdesignationbasedondefinitiontypefromLocalIDType,previousfield.
Peer ID type: Clickthedrop-downmenutoselectthetypeofPeerIDforthisprofile(IPaddress,DomainName,Email
Address).
Peer ID: EnterthePeerIDdesignationbasedondefinitiontypefromPeerIDType,previousfield.
Apply: ClickApply to save the changes.
Cancel: ClickCancel to delete the changes.
![Page 101: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/101.jpg)
101
SA (Security Association)IKE(InternetKeyExchange)isconfiguredintwonegotiations.
Phase1authenticatestheVPNClientstoeachotherby
confirmingthematchingPre-SharedKeywiththetwogateways.
IPSecisthePhase2oftheVPNprocess.
Manually configuring a VPN tunnel profile.
IKE (Phase 1) ProposalExchange:Clickthedrop-downmenutoselectthetypeof
exchange(MainMode,AggressiveMode).
DH Group:Clickthedrop-downmenutoselecttheDHgroup(group1,group2,group5,group14).
Encryption: Clickthedrop-downmenutoselectthetypeofencryption(DES,3DES,AES128,AES192,AES256).
Authentication: Clickthedrop-downmenutoselecttheauthenticationprotocol(MD5,SHA1).
Life Time: Enter the life time value for Phase 1. The life time
valueshouldbegreaterthanPhase2(IPSec).86400sec.(1day)
is a common default and is a normal value for Phase 1.
IPSec (Phase 2) ProposalProtocol: Clickthedrop-downmenutoselecttheprotocoltype(ESP,AH)
Encryption: Clickthedrop-downmenutoselectthetypeofencryption(DES,3DES,AES128,AES192,AES256).
Authentication: Clickthedrop-downmenutoselecttheauthenticationprotocol(MD5,SHA1).
Perfect Forward Secrecy (PFS):SelectenabletoenablePFS.AfreshDHkeyisgeneratedduringIKEphaseIIandrenewedfor
eachkeyexchangetoeliminatedependenciesbetweenthe
keys.
DH Group: Clickthedrop-downmenutoselecttheDHgroup(group1,group2,group5,group14).
Life Time: Enter the life time value for Phase 2. The life time
valueshouldbesmallerthanPhase1(IKE).3600sec.(1hour)
is a common value for Phase 2.
Apply: ClickApply to save the changes.
Cancel:ClickCancel to delete the changes.
![Page 102: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/102.jpg)
102
Network
Manually configuring a VPN tunnel profile.
Security Gateway Type:Clickthedrop-downmenutoselecttheSecurityGatewayType(IPAddress,DomainName)
Security Gateway: EnterthegatewayvalueasdefinedinSecurityGatewayType.
Local NetworkLocal Address: EntertheIPaddressofthelocalPC.Local Netmask: EnterthenetmaksofthelocalPC.
Remote NetworkRemote Address: EntertheIPaddressoftheremotePC.Remote Netmask: EnterthenetmaskoftheremotePC.Apply: ClickApplytosavethechanges.Cancel: ClickCanceltodeletethechanges.
![Page 103: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/103.jpg)
103
Advanced
Manually configuring a VPN tunnel profile.
NAT Traversal: SelectenabletoenabletheNATTraversalfunctioninordertohidetheprivateIPaddressfrompublicview.
Note: ServicessuchasVoIPrequiretheuseofaprivateIP address.
Dead Peer Detection:Apply: ClickApplytosavethechanges.Cancel: ClickCanceltodeletethechanges.
![Page 104: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/104.jpg)
104
Configuring a User SettingTheUserSettingfunctionallowsyoutocreateuserprofiles
inordertosetuploginaccesstotheVPNservice.
NameEnterthenameofthenewuserprofile.
PasswordEnterthepasswordfortheusername.
ConfirmEnterthepasswordasecondtimetoconfirmthesetting.
AddClickAddtoaccepttheprofileandaddittotheCurrentVPNUser
Table.
ResetClickResettoclearthenewsettings.
Current VPN User TableDisplaystheUserID,UserNameandSelectionstatus.
Delete SelectedClicktodeletetheselecteduserprofile.
Delete AllClicktodeleteallthecurrentuserprofiles.
ResetClicktocleartheselectionsfromtheCurrentVPNUserTable.
ApplyClicktoacceptsavethenewsettings.
CancelClicktoclearthenewchanges.
![Page 105: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/105.jpg)
105
USB PortTheESR350routerisequippedwithaUSBportforconnectingaharddrivesomediacontentcanbeaccessedortransferredtoother
devicesinthehomeordevicesawayfromhome.
Viewing EnShareTheEnSharefeatureallowsyoutoaccessmedia
contentstoredonaUSBharddriveconnectedtothe
router’sUSBportinthehomeandwhenyouareaway
fromhomewhenyouhaveaccesstotheInternet.
By default the EnShare feature is enabled.
To view the EnShare settings or disable EnShare, click USB Port then select EnShare.
1. Select DisabletodisabletheEnSharefeature.2.ClickApplytosavethenewsettings.
File SharingTheFileSharingfunctionallowsyoutoprovideusers
theabilitytosharefilesoverthenetworkthroughthe
Sambaservice.By default the EnShare feature is enabled.
ToviewtheFileSharingsettings,clickUSB Port then select File Sharing.
1. Select EnabletoenabletheSambaServicefunction.2.ClickApplytosavethenewsettings,orclickCancel to delete the changes.
![Page 106: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/106.jpg)
106
Viewing File ServerTheFileServerfunctionallowsyoutoprovidenetworkusersFTPaccesstosharedUSBstoredfiles.
ToviewtheFileServersettings,clickUSB Port then select File Server.
Enable FTP ServiceSelectthistoenabletheFTPservicetosharefilesontheUSB
device
Port NumberDefinetheportnumber(default:21)toopenfortheFTPservice.
Login TimeoutDefinetheperiodofinactivity(default:90)beforeauseris
logged out.
Stay TimeoutDefinethelockoutperiod(default:90)beforeauserisallowed
to attempt a login.
Login UserDefinethenumberofconcurrentuserstoaccesstheservice
(Max:20users)
Share ModeDefinethetypeofsharepriviledge:Read/Write,Readonly.
Use Anonymous LoginSelectthistoallowanonymoususerlogin.
User NameEnter the user name to login to the FTP service.
PasswordEnterthepasswordtologintotheFTPservice.
![Page 107: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/107.jpg)
107
Viewing DLNATheDLNAMediaServerfunctionallowsyoutotransferphotos,musicandvideobetweennetworkeddevicesthroughtheESRSeries
Router.
ToviewtheDLNAsettings,clickUSB Port then select DLNA.
1. Select EnabletoenabletheDLNAMediaServerfunction.2.IntheShareFolderName,enterthenameofthesharedfolder.
3.ClickApplytosavethenewsettings,orCancel to clear the changes.
![Page 108: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/108.jpg)
108
Advanced Network Settings
NAT SetupNetworkAddressTranslation(NAT)allowsusersontheLANtoaccesstheInternetthroughasinglePublicIPAddressormultiple
PublicIPAddresses.NATprovidesfirewallprotectionfromhackerattacksandallowsformappingLANIPaddressestoWANIP
addresseswithkeyservicessuchaswebsites,FTP,andvideogameservers.
ToviewtheNATsettings,clickAdvanced then select NAT.
NATEnableorDisabletheNAT.
Network TurbineEnableorDisablethenetworkturbine.
Note: Thenetworkturbineisdesignedtoimprovetherouter’sperformance.Thereisabout20~30%improvementwhenthenetworkturbineisenabled.
Note: ThenetworkturbinemaycauseproblemswiththeInternetconnection.Disablethenetworkturbinefunctionifyouexperience
connection issues.
ClickApply to save the settings or Cancel to discard changes.
![Page 109: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/109.jpg)
109
Port Mapping SetupPortMappingallowsyoutoredirectaparticularrangeofserviceportnumbersfromtheWANtoaparticularLANIPaddress.
ToviewthePortMappingsettings,clickAdvanced then select Port Mapping.
Enable Port MappingClickEnablePortMappingtoactivateportmapping.
DescriptionEnternotesordetailsaboutthemappedportrange
configuration.
Local IPEnterthelocalIPaddressoftheserverbehindthe
NATfirewall.
ProtocolSelecttheprotocoltouseformappingfromthefollowing:TCP,UDPorBoth.
Port RangeEntertherangeofportstobeforwarded.
ClickAddtoappendanewdevicetothelistorReset to discard changes.
![Page 110: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/110.jpg)
110
Current Port Mapping TableDisplaysalistofmappedportrangesinuseonthenetwork.
No. (Number)Thesequencenumberofthemappedportrange.
DescriptionNotesordetailsaboutthemappedportrange.
Local IPIP address of the server for the mapped port range.
TypeTheprotocolusedtocommunicatewiththeWANportsandLAN
server.
Port RangeThe range of mapped ports.
SelectIndicatesthedevice(s)thatcanhaveactionsperformedonthem.
ClickDelete Selected to remove selected devices from the list.
ClickDelete All to remove all devices form the list.
ClickReset the discard changes.
ClickApply to save the settings or Cancel to discard changes.
![Page 111: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/111.jpg)
111
Port Forwarding SetupPortforwardingenablesmultipleserverapplicationsonaLANtoserveclientsonaWANoverasingleWANIPaddress.Therouter
acceptsincomingclientpackets,filtersthembasedonthedestinationWAN,orpublic,portandprotocolandforwardsthepacketsto
theappropriateLAN,orlocal,port.UnliketheDMZfeature,portforwardingprotectsLANdevicesbehindthefirewall.
ToviewthePortForwardungsettings,clickAdvanced then select Port Forwarding.
Enable Port ForwardingClickEnablePortForwardingtoactiveportforwarding.
DescriptionEnternotesordetailsabouttheforwardedportconfiguration.
Local IPEnterthelocalIPaddressoftheserverbehindtheNATfirewall.
ProtocolSelecttheprotocoltouseformappingfromthefollowing:TCP,
UDPorBoth.
Local PortEntertheLANportnumberthatWANclientpacketswillbe
forwardto.
Public PortEntertheWANportnumberthatclientswillsendtheirpackets
to.
ClickAddtoappendanewconfigurationtothetableorResetto discard changes.
![Page 112: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/112.jpg)
112
Current Port Forwarding TableThetableofcurrentportforwardingconfigurations.
ClickDelete Selected to remove selected devices from the list.
ClickDelete All to remove all devices form the list.
ClickReset the discard changes.
ClickApply to save the settings or Cancel to discard changes.
![Page 113: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/113.jpg)
113
Port Triggering SetupSomeapplications,suchasonlinegames,videoconferencingandVoIPtelephony,requiremultipleportsforinboundandoutbound
traffic.Ifanapplicationrequiressimultaneoususeofincomingandanoutgoingports,configureporttriggeringtomapalocalportor
rangeofportstoaspecificpublicport.Sendingpacketsoutoverthelocalporttriggerstheroutertoopenanincominglocalportthat
ismappedtothesamepublicportandapplicationastheoutgoinglocalport(s).Thelocalapplicationcancommunicateoverthe
incomingandoutgoingportswithouttheneedforcreatingafixedaddress.
ToviewthePortTriggeringsettings,clickAdvanced then select Port Triggering.
Enable Port TriggeringClickEnableTriggerPorttoactivateporttriggering.
DescriptionEnternotesordetailsabouttheporttriggeredconfiguration.
Popular ApplicationsSelectadefaultapplicationoraddanewone.
Trigger PortEntertheapplication’soutboundportnumber(s).
Trigger TypeSelecttheprotocoltouseforporttriggeringfromthefollowing:
TCP,UDPorBoth.
Public PortEntertheinboundport(s)fortheapplicationinthefollowing
format:2300-2400or47624.
![Page 114: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/114.jpg)
114
Public TypeSelecttheprotocoltousefortheinboundportfromthefollowing:TCP,UDPorBoth.
ClickAdd toappendanewconfigurationtothetableorReset to discard changes.
Current Port Triggering TableThelistofcurrentporttriggeringconfigurations.
ClickDeleteSelectedtoremoveselecteddevices
from the list.
ClickDelete All to remove all devices form the list.
ClickReset the discard changes.
ClickApplytosavethesettingsorCanceltodiscardchanges.
![Page 115: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/115.jpg)
115
Application Layer Gateway SetupTheALG(ApplicationLayerGateway)servesasawindowbetweencorrespondentapplicationprocessessothattheymayexchange
information on an open environment.
ToviewtheALGsettings,clickAdvanced then select ALG.
SelectthelistedapplicationsthatneedALGsupportandthentherouterwillauthorizethemtopassthroughtheNATgateway.
ClickApply to save the settings or Cancel to discard changes.
![Page 116: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/116.jpg)
116
Universal Plug and Play SetupUPnPhelpsinternetdevices,suchasgamingandvideoconferencing,toaccessthenetworkandconnecttootherregisteredUPnP
devices.
ToviewtheUPnPsettings,clickAdvanced then select UPnP.
ClickEnable or Disable to activate or deactivate UPnP.
ClickApply to save the settings or Cancel to discard changes.
![Page 117: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/117.jpg)
117
Internet Group Multicast Protocol SetupInternetGroupMulticastProtocol(IGMP)isanetwork-layerprotocolusedtoestablishmembershipinamulticastgroup.
ToviewtheIGMPsettings,clickAdvanced then select IGMP.
ClickEnable or Disable toactivateordeactivateIGMP.ClickApply to save the settings or Cancel to discard changes.
Note: DisablingtheMulticastfunctionmaycauseIPbasedmultimediadevices,suchasanIP-STBorOTTbox,mayloseconnectivitywiththemediastreamingserver.
![Page 118: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/118.jpg)
118
Quality of Service SetupQoScanprioritizebandwidthusesuchasvideostreaming,onlinegaming,VoIPtelephonyandvideoconferencingtoensurestable
andefficientnetworkperformance.
ToviewtheQoSsettings,clickAdvanced then select QoS.
Total Bandwidth SettingsUplinkSelectthemaximumbandwidthspeedforoutbound
traffic.
DownlinkSelectthemaximumbandwidthspeedforinbound
traffic.
Note:ClickDisabled ifyoudonotwanttoprioritizeanydataorprotocol.
![Page 119: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/119.jpg)
119
Priority QueueSetnetworkresourceusagebasedonspecificprotocolsorportranges.Incomingpacketsareprocessedbasedontheprotocols’
positionwithinthequeue.
Unlimited Priority QueueLocal IP AddressEnterthelocalIPaddressofadeviceonthenetwork.
Thisdevice’sactivityisnotrestrictedbytheQoSfeature.
High/Low Priority QueueSpecify the priority for different protocols. Additional
protocolsandportrangescanbeadded.
ClickApply to save the settings or Cancel to discard
changes.
![Page 120: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/120.jpg)
120
Bandwidth AllocationSetnetworkresourceusage,forinboundandoutboundtraffic,basedonlocalIPandportranges.
TypeSelectDownloadorUploadtospecificthedirectionofpacket
traffic.
Local IP RangeEnterthelocalIPrangeofthecurrentconfiguration.
ProtocolSelecttheprotocoltomanageforthecurrentconfiguration.
Port RangeEnterthelocalportrangeofthecurrentconfiguration.
PolicySelectMinorMaxtospecifythetypeofconfigurationpolicy.
Rate (bps)Selectthebandwidthrate,inbitspersecond(bps),ofthecurrentconfiguration.
ClickAdd tosavethesettingsandlisttheconfigurationintheCurrentQoStableorReset the discard changes.
ClickApply to save the settings or Cancel to discard changes.
![Page 121: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/121.jpg)
121
Routing SetupTypicallystaticroutingdoesnotneedtobesetupbecausetherouterhasadequateroutinginformationafterithasbeenconfigured
forInternetaccess.Staticroutingisonlynecessaryiftherouterisconnectedtonetworkunderadifferentsubnets.
ToviewtheRoutingsettings,clickAdvanced then select Routing.
Note: Toenableastaticrouting,NATmustbedisabled.Iftherouterisconnectedwithanetworkunderthedifferentsubnet,theroutingsetupallowsthenetworkconnectionwithintwodifferentsubnets.
Enable Static RoutingClickEnableStaticRoutingtoactivatethefeature.
Destination LAN IPEntertheLANIPaddressofthedestinationdevice.
Subnet MaskEntertheSubnetMaskofthedestinationdevice.
Default GatewayEnterthedefaultgatewayIPaddressforthedestinationdevice.
HopsEnterthemaximumnumberofhopswithinthestaticrouting
thatapacketisallowedtotravel.
InterfaceSelectLANorWANastheinterface.
ClickAddtosavethesettingsandlisttheconfigurationintheCurrentStaticRoutingtableorReset the discard changes.
View and select devices in the Current Static Routing Table.ClickDelete Selected or Delete All to remove devices
fromthetable.ClickReset to stop.
ClickApply to save the settings or Cancel to discard changes.
![Page 122: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/122.jpg)
122
Wake on LAN SetupWakeonLANsetup(WOL)allowstheadministratortoactivateacomputeroverthenetwork.
ToviewtheWOLsettings,clickAdvanced then select WOL.
Enabling WOL over WAN ClickEnable WOL over WAN to activate the feature.
Server Port Enter the server port of the device to activate.
Wake MAC Address EntertheMACaddressofthedevicetoactivate.
ClickStart to activate the device.
ClickApply to save the settings or Cancel to discard changes.
![Page 123: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/123.jpg)
123
Tools Setup
Configuring the Administrator AccountChangetherouter’ssystempasswordaswellassetupadevice
toremotelyconfigurethesettings.
ToviewtheAdminsettings,clickTools then select Admin.
• Login Name:Keeporchangeexistingloginname• Old Password:Entertheexistingadministratorpassword• New Password:Enterthenewadministratorpassword• Repeat New Password: Re-typethenewadministratorpassword• Graphical Authentication: ToenableordisableCAPTCHA
Remote Management• Host Address: Enter the designated host IP Address.
• Port: Entertheportnumber(Default:8080)forremoteaccessingmanagementwebinterface.
• Enable:Selecttoenableremotemanagement.
ClickApply to save the settings or Cancel to discard changes.
Note: To access the settings of the ESR Series Router remotely, entertherouter’sWANIPaddressandportnumber.
![Page 124: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/124.jpg)
124
System Time SettingChangethesystemtimeoftheESRSeriesRouterandsetupautomaticupdatesthroughanetworktime(NTP)protocolserveror
through a computer.
ToviewtheTimesettings,clickTools then select Time.
Synchronizing with an NTP Server
Time SetupSelecthowtheESRSeriesRouterobtains
the current time.
Time ZoneSelectthetimezonefortheESRSeriesRouter.
NTP Time ServerEnterthedomainnameorIPaddressofanNTPserver.
Enabling Daylight SavingsClicktoenableordisabledaylightsavingstime.
Start TimeSelectthedateandtimewhendaylightsavingstimestarts.
End TimeSelectthedateandtimewhendaylightsavingstimeends.
ClickApply to save the settings or Cancel to discard changes.
![Page 125: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/125.jpg)
125
Synchronizing Time with a Computer
Time SetupSelecthowtheESRSeriesRouterobtainsthecurrenttime.
Computer Date and TimeDisplayssystemdateandtimefromacomputer.
Enable Daylight SavingClicktoenableordisabledaylightsavingstime.
Start TimeSelectthedateandtimewhendaylights
savings time starts.
End TimeSelectthedateandtimewhendaylightssavingstimeends.
ClickApply to save the settings or Cancel to discard changes.
![Page 126: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/126.jpg)
126
Dynamic Domain Name Service (DDNS) SetupThemostcommonuseforDDNSisinallowinganInternetdomainnametobeassignedtoacomputerwithavarying(dynamic)IP
address.ThismakesitpossibleforothersitesontheInternettoestablishconnectionstothemachinewithoutneedingtotracktheIP
address themselves.
ToviewtheDDNSsettings,clickTools then select DDNS.
Dynamic DNSClicktoenableordisableDDNS.
Server AddressSelect the server address.
Host NameEnter the host name.
UsernameEnter a username for the host service.
PasswordEnterapasswordforthehostservice.
ClickApply to save the settings or Cancel to discard changes.
![Page 127: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/127.jpg)
127
Diagnosis that Client Devices Are Connected to the RouterThediagnosisfeatureallowstheadministratortoverifythataclientdeviceisavailableonthenetworkandisacceptingrequest
packets.Ifthepingresultreturnsalive,itmeansadeviceisconnected.Thisfeaturedoesnotworkifthetargetdeviceisbehinda
firewallorhassecuritysoftwareinstalled.
ToviewtheDiagnosissettings,clickTools then select Diagnosis.
Diagnosing a Network Connection Problem
Address to PingEnter IP address of the device to ping.
Ping FrequencySelect the interval, in seconds, that the ping message is sent out.
ClickStarttobeginthediagnosis.
![Page 128: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/128.jpg)
128
Upgrading The Router’s FirmwareFirmwareistherouter’ssystemsoftwarethatoperatesandallowstheadministratortointeractwithit.
ToviewtheFirmwaresettings,clickTools then select Firmware.
WARNING! Upgradingfirmwarethroughawirelessconnectionisnotrecommended.FirmwareupgradingmustbeperformedwhileconnectedtoanEthernet(LANport)withallotherclientsdisconnected.
Toupdatethefirmwareversion,followthesesteps:
1.DownloadtheappropriatefirmwareapprovedbyEnGeniusfromanEnGeniuswebsite.SeetheDownloads tab on the product page for this product.Fornewproducts,newfirmwaremaynotbereadilyavailable.2.ClickChoose File.
3.Browsethefilesystemandselectthefirmwarefile.
4.ClickApply.
![Page 129: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/129.jpg)
129
Backing Up The Router’s SettingsSavethemasaconfigurationfileonyourcomputer.
ToviewtheBack-upsettings,clickTools then select Back-up.
Restoring to the router’s Factory Default settingsClickResettorestoretheESRSeriesRoutertofactorydefaults.
Backup SettingsClickSave tosavethecurrentconfigurationontheroutertoa*.dlffile.
Restore SettingsTorestoresavedsettings,dothefollowing:
a.ClickChoose File.
b.Browsethefilesystemforlocationofthesettingsfile(*.dlf).
c.ClickUpload.
![Page 130: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/130.jpg)
130
Rebooting the RouterThisfeatureallowsyoutoreboottherouterintheeventofasystemhanguporotherdisruptiontothenetwork.
ToviewtheResetsettings,clickTools then select Reset.
ClickApply to reset the device.
![Page 131: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/131.jpg)
131
Appendix
![Page 132: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/132.jpg)
132
Wall Mounting The RouterThefollowingareinstructionsifyouchoosetomounttherouterona
wall.
Note: ChoosealocationthatiswithinreachofanelectricaloutletfortheACadapterandtheDSLorCablemodem.
Tomountthedeviceonthewalldothefollowing:
1.Measurethedistancefromthemiddleofeachmountingscrewhole.
2.Markthelocationsofthescrewholesonthewall.
3.Drillaholeforeachmarkedlocationandinsertascrewineach.
Note: Makesuretoleaveenoughofthescrewheadabovethewallsurfacetosecuretherouter.
4.Installandsecurethemountsontotherouter.
5.Installtherouteronthewall.
![Page 133: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/133.jpg)
133
Federal Communication Commission Interference Statement
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCC
Rules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This
equipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe
instructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnot
occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbe
determinedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneofthefollowing
measures:
• Reorient or relocate the receiving antenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
WARNING! Anychangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatethisequipment.
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynot
causeharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesired operation.
FCC Radiation Exposure Statement Important:ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.ThisdevicecomplieswithFCCRFExposurelimitssetforthforanuncontrolledenvironment,under47CFR2.1093paragraph(d)(2).Thistransmittermustnotbeco-locatedoroperatinginconjunctionwithanyotherantennaortransmitter.
![Page 134: IMPORTANT - EnGenius...7 Reset Button — For resetting the router to its factory default settings by pressing button for more than 11 seconds or until the Power LED starts flashing](https://reader034.vdocuments.us/reader034/viewer/2022052518/5f0cafcd7e708231d436a2c5/html5/thumbnails/134.jpg)
134
Industry Canada Statement
ThisdevicecomplieswithRSS-210oftheIndustryCanadaRules.Operationissubjecttothefollowingtwoconditions:(1)This
devicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethat
may cause undesired operation.
CedispositifestconformeàlanormeCNR-210d’IndustrieCanadaapplicableauxappareilsradioexemptsdelicence.Son
fonctionnementestsujetauxdeuxconditionssuivantes:(1)ledispositifnedoitpasproduiredebrouillagepréjudiciable,et(2)ce
dispositifdoitacceptertoutbrouillagereçu,ycomprisunbrouillagesusceptibledeprovoquerunfonctionnementindésirable.
Important:Radiation Exposure Statement: ThisequipmentcomplieswithICradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiator&yourbody.Déclaration d’exposition aux radiations:Cetéquipementestconformeauxlimitesd’expositionauxrayonnementsICétabliespourunenvironnementnoncontrôlé.Cetéquipementdoitêtreinstalléetutiliséavecunminimumde20cmdedistanceentrelasourcederayonnementetvotrecorps.