1.

IMPACT CRUSHERS - IMPACT MILLS

www.rev. i t

2.

IMPACT CRUSHERS

The high throughput capacity and wide range of setting solutions can cover a broad selection of medium-high hard materials with medium-low abrasiveness. REV impact mills are characterised by robust construction and resistant wear material to provide a higher degree of reliability and dura-bility of the components. An outstanding inlet opening and diverse rotor variants deliver in-creased productivity and improved end prod-uct grain shape and quality.

UP 12.12UP 14.14UP 16.16UT 11.7UT 12.9 UT 14.10ML 8.5 ML 10.5ML 12.5

MS 80MMS 120MMS 80LMS 120LMST 60PMST 80PMST 120PMT 60LMT 80LMT 120L

3.

TECHNICAL SPECIFICATIONS

TypeClearance dimensions in mm

A B C D E F G H I

UP 12.12 1208 900 2244 1650 3495 2470 2980 2605 1775

UP 14.14 1408 900 2431 1890 3835 2865 3545 2865 1870

UP 16.16 1608 1240 2810 2200 4720 3550 4550 3550 2210

TypeFeed opening

(mm)Maximum feed size

(mm)Production

(ton/h)Speed (rpm)

Power(kW)

Weight(kg)

UP 12.12 1208x1150 50÷800 100÷350 500÷650 132÷250 29000

UP 14.14 1408x1350 80÷950 100÷480 450÷550 200÷315 34500

UP 16.16 1608x1550 80÷1200 150÷580 450÷550 450÷560 60000

UPImpact crushers suitable for primary crushing, capable of replacing the jaw crushers when the feed material is composed of not too hard and low-abrasiveness rocks. They are particularly suitable to produce higher percentage of fine aggregates than with the jaw crusher.

The end product size can be chosen by hydraulically adjusting the gap between the blow bars and the impact plates located in the lower area of the crushing chamber.Furthermore, special adjustable stakes prevent material from clogging. The frame can be easily opened through hydraulic system to give greater access during wear part replacement and machine maintenance.

H

I

E

F

GC

D

A

ØB

PRODUCTION CURVESThe chart represents the indicative product gradation, depending on the feed material, the density of the processed material and its crushability.

Cum

ulat

ive

pas

sing

(% w

eigh

t)

Gap adjustment impact plates-blow bars C.S.S. mm 60 80 100 200 250

Square opening sieves (mm)

100

90

80

70

60

50

40

30

20

10

2 35

68

9

10

20 3050

6080

90

100

200 300500

600800

900

1000

150 50

4.

TECHNICAL SPECIFICATIONS

TypeClearance dimensions in mm

A B C D E F G H I L

UT 11.7 1000 600 1988 1090 1950 2200 2600 2850 1365 2680

UT 12.9 1200 600 2188 1125 1950 2200 2600 2850 1365 2680

UT 14.10 1400 600 2388 1230 1950 2200 2600 2850 1365 2680

TypeFeed opening

(mm)Maximum feed size

(mm)Production

(ton/h)Speed(rpm)

Power(kW)

Weight(kg)

UT 11.7 1000x760 600÷700 60÷200 500÷650 90÷160 13200

UT 12.9 1200x860 650÷750 80÷300 500÷650 132÷200 15500

UT 14.10 1400x960 750÷850 100÷360 450÷600 160÷250 17500

UTThe UT series impact crushers are suitable for primary mobile crushing applications, and are capable of replacing the jaw crushers when the feed material is composed of not too hard and abrasive rocks. They are particularly suitable to produce higher percentage of fine aggregates

in comparison to the jaw crusher. The end product size can be chosen by hydraulically adjusting the gap between the blow bars and the impact plates located in the lower area of the crushing chamber. The frame can be easily opened through hydraulic system to give greater access during wear part replacement and machine maintenance.

A

ØB

D

C

F

G

H

E

I

L

PRODUCTION CURVESThe chart represents the indicative product gradation, depending on the feed material, the density of the processed material and its crushability.

Cum

ulat

ive

pas

sing

(% w

eigh

t)

Gap adjustment impact plates-blow bars C.S.S. mm 30 40 60 150 200

Square opening sieves (mm)

100

90

80

70

60

50

40

30

20

10

2 35

68

9

10

20 3050

6080

90

100

200 300500

600800

900

1000

25 50 80 100

5.

TECHNICAL SPECIFICATIONS

TypeClearance dimensions in mm

A B C D E F G H I L

ML 8.5 800 480 1589 550 1230 1665 2130 2200 1300 2025

ML 10.5 1000 480 1789 550 1230 1665 2130 2200 1300 2025

ML 12.5 1200 480 1989 610 1230 1665 2130 2200 1353 2215

TypeFeed opening

(mm)Maximum feed size

(mm)Production

(ton/h)Speed(rpm)

Power(kW)

Weight(kg)

ML 8.5 800X550 150÷250 40÷120 770÷925 55÷90 6900

ML 10.5 1000X550 150÷250 60÷150 770÷925 75÷110 8000

ML 12.5 1200X610 150÷250 90÷180 770÷925 75÷132 9000

MLImpact crushers suitable for primary and secondary mobile crushing applications with feed material composed of not too hard and abrasive rocks. Adequately equipped and adjusted, they can be employed as higlhy profitable secondary impactors.

The end product size can be chosen by hydraulically adjusting the gap between the blow bars and the impact plates located in the lower area of the crushing chamber. The frame can be easily opened through hydraulic system to give greater access during wear part replacement and machine maintenance.

PRODUCTION CURVESThe chart represents the indicative product gradation, depending on the feed material, the density of the processed material and its crushability.

Cum

ulat

ive

pas

sing

( % w

eigh

t)

Gap adjustment impact plates-blow bars C.S.S. mm 25 30 50 100

Square opening sieves (mm)

100

90

80

70

60

50

40

30

20

10

2 35

68

9

10

20 3050

6080

90

100

200 300500

600800

900

1000

20 40 60 80

C

A

ØB

H

I

F

G

D

L

E

6.

MSThe MS series impact mills are four-row blow bars secondary impactors, ensuring high throughput capacity of sand produced (above 40÷50%).

They feature hydraulic devices, both for crushing chamber adjustment and fast access to the wear parts area during maintenance operations. L’inversione del senso di rotazione consente una maggiore durata e consumo uniforme di martelli e corazze.

TECHNICAL SPECIFICATIONS

Clearance dimensions in mm

A B C D E F G H I

Seco

ndar

y MS 80M 2300 2100 1150 1710 3300 2000 2500 850 808

MS 120M 2300 2100 1350 2165 3300 2000 2500 850 1208

MS 80L 2300 2100 1150 1710 3300 2000 2500 850 808

MS 120L 2300 2100 1350 2165 3300 2000 2500 850 1208

TypeMaximum feed

size (mm)

Production(Ton/h)

Power(kW)

Spped(rpm)

Prodotto reso al setaccio da mm 5

(%)

Weight(kg)

Seco

ndar

y MS 80M 10÷220 40÷100 110÷160 660÷850 40÷60 12500

MS 120M 10÷220 80÷190 132÷200 660÷850 40÷60 16000

MS 80L 10÷100 40÷80 110÷160 660÷850 40÷60 12500

MS 120L 10÷100 80÷160 132÷200 660÷850 40÷60 16000

H

I

E

F

G

C

D

A

B

Cum

ulat

ive

pas

sing

(%

wei

ght)

Square opening sieves (mm)

FUSO MEDIO ORIENTATIVO A CICLO APERTOThe chart represents the indicative product gradation, depending on the feed material, the density of the processed material and its crushability.

0.2 0.30.5

0.60.8

0.9

1

2 35

68

9 3020

10 50

7.

TECHNICAL SPECIFICATIONS

Clearance dimensions in mm

A B C D E F G H I

Seco

ndar

y MST 60P 2200 1805 920 1410 2780 1920 2500 785 608

MST 80P 2200 1805 1140 1710 2780 1920 2500 785 808

MST 120P 2200 1805 1340 2165 2780 1920 2500 785 1208

Tert

iary

MT 60L 2200 1805 920 1410 2780 1920 2500 785 608

MT 80L 2200 1805 1140 1710 2780 1920 2500 785 808

MT 120L 2200 1805 1340 2165 2780 1920 2500 785 1208

TypeMaximum feed

size (mm)

Production(Ton/h)

Power(kW)

Speed(rpm)

Prodotto reso al setaccio da mm 5

(%)

Weight(kg)

Seco

ndar

y MST 60P 8÷80/120 30÷60 75÷132 725÷850 55÷65 7600

MST 80P 8÷80/120 40÷90 110÷160 725÷850 55÷65 10100

MST 120P 8÷80/120 70÷150 132÷200 725÷850 55÷65 12300

Tert

iary

MT 60L 6÷30 30÷40 75÷132 925÷1080 80÷90 6700

MT 80L 6÷30 30÷60 110÷160 925÷1080 80÷90 8850

MT 120L 6÷30 70÷150 132÷200 925÷1080 80÷90 10400

MST - MTMST series secondary impact mills are suitable to produce high percentage of fine aggregates and excellent end product cubicity. They are usually composed of a four-row heavy-duty rotor with blow bars made from either chrome-alloy or manganese steel. MS series impactors are tertiary blow-bar mills, supplied with chrome-alloy breaker plates and blow-bars, particularly suitable for

more abrasive types of rock. This series is equipped with 2-row rotors. All impactors are supplied with hydraulic system to adjust the crushing cavity, and possibilità di invertire periodicamente il senso di rotazione per consentire una maggiore durata e un consumo uniforme dei martelli e delle corazze. Hydraulic cylinders open the frame for fast access to the crushing chamber, thus ensuring safe and easy maintenance operations.

MST

Cum

ulat

ive

pas

sing

(%

wei

ght)

Cum

ulat

ive

pas

sing

(%

wei

ght)

FUSO MEDIO ORIENTATIVO A CICLO APERTOThe chart represents the indicative product gradation, depending on the feed material, the density of the processed material and its crushability.

MT

0.2 0.30.5

0.60.8

1

2 35

68

10

20 30

50

0.2 0.30.5

0.60.8

1

2 35

68

10

20

E

F

G

H

A

B

C

D

I

8.

REV has been in the market of machines and plants for mining industry, aggregates processing and recycling for over 40 years. Research and continuous planning evolution form the basis of a top-of-the-range product for its high quality, reliability, performance and long operating life.

In the market of mobile plants, REV offers a wide range of products:

• Self-loading crushing and screening units• Tracked crushing groups for recycling and quarrying applications: from the small GCV 60 weighing 13 tons to the very large GCS 140 of 150 tons• Secondary tracked crushing and screening units• Tracked screening groups GCV and GCR series machines are flexible and easy to operate, provide rapid installation and guarantee highly profitable and functional performances in recycling contracting jobs.GCS series is a field proven benchmark for those who operate in the industry of quarrying and major demolition jobs.

A highly professional after sales and support service, an extensive range of spare parts available on stock and skilful personnel are a most renowned calling card and represent the added value of each product manufactured into REV factory.

REV S.r.l.Via Marecchiese, 6647864 Pennabilli (RN) - ItalyTel +39 0541 928474 - Fax +39 0541 928157http://www.rev.it • e-mail: rev.srl@rev.it

The specifications in this brochure are not binding. REV reserves the right to make changes without notice.