charging

HOW TO PLAY:1. After receiving the rc boat, please charge it firstly, as we can not sure every boat is full charged before shipped out, low-Voltage operation will burn and damage the motor. Note that the usb charger's indicator light will remain off while charging, and the indicator light will only turn red whenfully charged.2.Connect the battery with the power connector, make surethe hatch cover will settle down well before the boat starts, then turn the knob to the left or right until fastened.3.Make sure that: (1) put the boat in the water (2) then turn on the controller, know that the propeller willnot turn when it is on the ground. The boat only works in thewater. Maybe the red light on controller only flashes and youcouldn't control the boat if you turn on the control beforeputting the rc boat in the water. (3)Please take the battery out when you do not need to playit. Open the hatch cover and remove the battery after playing,let the inner surface of the boat dry, otherwise it will reduce the life of the boat.Note: 1.The boat should be put on the water first and then turn on the controller. Because the rc boat have Motor protectivedevice; only when the boat put on the water, the propeller brass contact with water, then it will be energized.2.Don't touch the motor and keep the boat dry after runningto ensure the lifetime of the boat.3.In the process of playing, if the cabin flooded accidentally, please open the hatch cover to dry, otherwise the circuitboards will be easy to burned.

Dear customerThank you for choosing GotechoD product.We promise 90 DAY money back/replacement guarantee,24 months product defect free replacement warranty.Contact us freely if you got any problems.Thanks again for your support to us.Best wishes to you.Sincerely

GotechoD Direct