II]

II

yame

D

IfJ

ing it more energy

usly

s

.~f:< ....•••.FJfJ•,.

l II

construction) and the

ldings are easier to erect.teel Building Systems .usands of steel ,>

ear, it has a great .I"

g power with. This powere ability touilding

e

~'lllIllllllllnllI ""y Iiveandodels.yourent.indow

(

"'.

~ Industrial Gravity••• Ventilators

10' ridge ventilatorof large capacitywith mechanical

damper and birdscreen.

IICircular VentilatorsComes in .1-,:-20" or 24"throat mod­els with

corrugatedor flat flashing. Can be mountedon ridge or hillside with damperand screen standard.

IIStandard Wall LouversEasy to installon site. lUlUAvailable instandard

rectangular orcustomshapes.

r~ Walk Doors-=-- Rugged 3' x 7'walk doors aresupplied totallyinsulated with akey lock.

~ Continuous-=- Ridge VentilatorsAlso avail­able asnon-contin­uous in 9"or 12"throat models. Comes stan­dard with flat skirt, birdscreen, operator anddampers.

IISliding DoorsLess ~I-'

expensive

to purchase L'and install .1

than overhead doors. Perfectfor farm buildings and smallairplane hangers. Includes allsheeting, trim and fasteners.

D Standard Gutters &Downspouts

The contour designefficiently controlsdrainage from rainand snow.

IfJ Flashing & TrimOversized archi­tectural trimcombines withroof and wallclosures.

IIOverhead DoorsHeavy-duty 24 gauge withoptionsincludinginsulation,electricoperatorsand windows. Custom doorsavailable upon request.

NORTHLAND STEEL BUILDINGACCESSORIES . . .

These accessories can greatly enhance theappearance of your steel building along withmaking it more energy efficient. The accessoriesin this brochure are designed specifically forpre-engineered steel buildings and can bepurchased at the same time you order yourbuilding from Northland Steel Buildings.

IIi1 Low Profile VentilatorsIE) Horizontal Slide WindowsCompletely I """I' --'(assembled, easyto install on site, Iavailable in allpopular sizes.

mmit Hoods &Roof Curbs ~

III SkylightsTranslucent panelscifications. ~'provide inexpensive

ior lighting by ~.letting in natural

ght.1m CupolasAvailable in 2, 3 and4-foot square models.Adds charm to yourbuilding yet isfunctional as a vent.

available in a variety of sizes

and styles. Ideal for added shadeprotection from inclementther for windows and doors.

Insulation

IIi1 Low Profile VentilatorsIE) Horizontal Slide WindowsCompletely I """I' --'(assembled, easyto install on site, Iavailable in allpopular sizes.

~

III SkylightsTranslucent panels~'provide inexpensive~.letting in natural 1m CupolasAvailable in 2, 3 and4-foot square models.Adds charm to yourbuilding yet isfunctional as a vent.

ariety of sizes

and styles. Ideal for added shadeinclementand doors.

Northland Steel Buildings800-763-1303

struct

interiostoppof he

rst Layerf Insulation

Interior View Of Accessories

o Interior Liner Panels fJ Overhead Doors IIWalk Doors IICommercial Lighting

AutomaticDoor OpenersFeaturing a 3­button stationfor easy openand close con­trol of standardlift sectionaloverheaddoors.

Illustrations For Base Trim, Base Channel, Low Girt And Framing Liner

WALL PANEL

BY OTHERS, MUSTBE ADEQUATE TOSAFELY RESISTTHE LOADSIN THE REACTIONREPORT (IF APPLICABLE)

WALL PANEL

#12 x11/4"S.O.S.

FRAMING LINER FOROVERHEAD ANDROLL-UP DOORS

BASE CHANNEL

INSIDE CLOSURE

(IF REO'D) L1"

[::TR001

(IF REO'D)

BASE NOTCHDETAIL "

OPTIONAL I 111/2"GUTTER ~SYSTEM

Standard Gutters And Down Spouts

The contour design efficientlycontrols drainage from rain and snow.

BY OTHERS, MUSTBE ADEQUATE TOSAFELY RESISTTHE LOADSIN THE REACTIONREPORT(IF APPLICABLE)

WALL PANEL

BASE TRIM

INSIDE CLOSURE

(IF REO'D) L

BASE NOTCHDETAIL

WALL PANEL

#12 x11/4"S.O.S.

Northland

BY OTHERS, MUSTBE ADEQUATE TOSAFELY RESISTTHE LOADSIN THE REACTIONREPORT (IF APPLICABLE)

LOW GIRT

TR001(IF REO'D)

BASE NOTCHDETAIL

(IF REO'D) L1"

CJ-TRIM8" OR 10" FRAMING LINER

• NAIMA 202-96 (Rev. 2000) Standard for Flexible Fiber Glass Insulation Used in Metal Buildings

• ASTM C 991-03 Type I, Flexible Glass Fiber Insulation for Metal Buildings

• GREENGUARD CertifiedSM

Specification Compliance

Submittal Sheet Certified R MetalBuilding InsulationInsulation

Description

Owens Corning Certified R MetalBuilding Insulation is a light densityfibrous glass blanket designed to belaminated with a variety of appropriatefacings. Certified R is available instandard R-Values of 10, 11, 13, 16 and19. R-25 is available as a special orderitem. Standard roll widths are 36", 48",60" and 72". Selected Made-to-Orderwidths are also available. The productcomplies with the North AmericanInsulation Manufacturers Association(NAIMA) Standard 202-96 (Rev. 2000)“Standard for Flexible Fiber GlassInsulation Used in Metal Buildings”.

Uses

Certified R Metal Building Insulationis used as part of the insulation systemin the roofs and side walls of metalbuildings. It is designed to be laminatedwith a variety of facings to provideattractive interior finishes, abuseresistance, and assistance in controlof moisture.

Application

Several methods are used to insulatemetal buildings. The usual method isto apply the insulation over thestructural members (purlins and girts)and inside the exterior panels. Thismethod generally accommodates singlelayer installations. Methods are alsoavailable to apply insulation betweenpurlins so as to accommodate greaterinsulation thicknesses and betterthermal performance.

Availability

Owens Corning Certified R MetalBuilding Insulations are fabricated anddistributed by a nation-wide networkof independent laminators assuringprompt service and delivery. Contactyour Owens Corning SalesRepresentative for the names ofinsulation laminators servicingyour area.

Certified Thermal Performance

Owens Corning Certified R MetalBuilding Insulation is regularly testedto ensure compliance to the NAIMA202-96 (Rev. 2000) Standard. Samplingand testing is performed by the NationalAssociation of Home Builders ResearchLaboratories (NAHBR). The productis labeled on the top surface of eachroll with the nominal R-value and the“NAIMA 202-96” (Rev. 2000) to indicatecompliance. The NAIMA 202-96 (Rev.2000) standard specifies thermalperformance which provides thecapability of obtaining nominal thermalresistance (R-values) after laminating.The actual thermal performanceobtained from the laminated productwill depend primarily on the recoveredthickness. Note that these nominalR-values are for the insulation only anddo not include the effects of facings,air films, compression of insulation atframing members, conductancethrough fasteners, or other heat transferpaths particular to an installation.

Standard Made to Order

R-10, 3.4" R-25, 7.5"

R-11, 3.7"

R-13, 4.3"

R-16, 5.3"

R-19, 6.3"

Moisture Absorption ASTM C 1104 <2% by weight

Fungi Resistance ASTM C 1338 provides no sustenance

Fire Hazard Classification UL 723* ASTM E 84, CAN/ULC S-102 FHC 25/50

Noncombustibility ASTM E 136 Noncombustible

Property Test Method Result

* The surface burning characteristics of these products have been determined in accordance with UL 723. This standard should be used to measure and describe the properties of materials, products or assemblies in responseto heat and flame under controlled laboratory conditions and should not be used to describe or appraise the firehazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this testmay be used as elements of a fire risk assessment which takes into account all of the factors which are pertinentto an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

Physical Property Data

Insulation

Certified R Metal Building Insulation

The recovered thickness achieved willdepend on a number of variablesdetermined in the laminating processand hence are outside of OwensCorning’s control. To address theseissues, a number of leading metalbuilding insulation laminators produceproducts which meet the NationalInsulation Association’s “Certified FacedInsulation Standard” (NIA 404).Samples of faced products areperiodically tested by a nationallyrecognized laboratory and determinedto meet the NIA standard.

OWENS CORNING WORLD HEADQUARTERSONE OWENS CORNING PARKWAYTOLEDO, OHIO, USA 43659

1-800-GET-PINK

www.owenscorning.com

Pub. No. 15-MB-15086-M Printed in U.S.A., November 2004 Copyright © 2004 Owens Corning

The GREENGUARD Indoor Air Quality mark is a certification markused under license through the GREENGUARD Environmental Institute.

®

Toll Free: 1-888-246-7858 www.therm-all.com

Cleveland, OH Lancaster, PA Madison, WI Atlanta, GA Orlando, FL Dallas, TX Phoenix , AZ Sacramento, CA

Compliments of: