iguzzini external lighting systems for north america - english
DESCRIPTION
This catalog shows a selection of the external iGuzzini UL compliant fittings available in North America. For more info, visit www.iguzzini-na.comTRANSCRIPT
External lighting system
2009-2010
Los Angeles County Museum of Art Los Angeles Renzo Piano Building Workshop & Arup Lighting
Woodruff Art Center Atlanta Renzo Piano Building Workshop & Arup Lighting
on the cover
External lighting system
Flood light & lighting projector system for urban areas
24 Platea14 Lingotto
2 Nuvola
Lingotto
8 Mininuvola
Lingotto
Indirect lighting systems for urban areas
32 Woody-
Miniwoody
42 Maxi
Woody
56 Frame
Woody
66 Multi
Woody
70 Ellipse 72 Vis 78 Full square
Grid square
80 Comfort
Celling/Wall surface-mounted and recessed luminaires
82 Kriss 86 Flash
88 Radius 92 Edge
Wall-washer luminaires
Architectural effect lighting luminaires
94 Tee 98 Glim cube 106 Euclide
112 Bliz 114 Arc 116 Spark 120 iWay 130 Pencil
Pathway fittings for residential/public areas
Systems for residential/public areas
Article index 136
Lamp Guide 138
Technical information 139
2
Nuvola is an indirect lighting system for urban areas which creates a uniform, glare-free illumination on the road. The system includes a reflector screen in polyester resin reinforced with fiberglass and a Lingotto floodlight.
3
design: R. Piano & MecanoNuvola
Suggested height: 30’. link roads, public areas, avenues with intense traffic, crossroads.
Suggested height: 18’. public areas, avenues and moderate traffic, crossroads.
Pole not included
design: R. Piano & MecanoNuvola
Nuvola is an indirect lighting system for exterior applications designed for metal halide lamp. Available with a single or double optical assembly, the system includes: – floodlight in die-cast aluminum, – control gear in separate box,
– reflecting panel made from polyester resin reinforced with fiberglass,
– die-cast aluminum mounting brackets.
Light pollution
The luminous flux emitted upwards by the Nuvola luminaire is less than 5%.
Stability under a load of snow is ensured up to a weight of 550 Ibs.
This fixture is rated IP55. UL Listed “Suitable for wet location”
Pole not included.
4
5
Photometric files are available at: www.iguzzini-na.com/downloads
Nuvoladesign: R. Piano & Mecano
26 ft
0
16 ft
32 ft0.6
0.7
1.01.21.51.72.02.22.5
16 ft 0
Isolux distribution Nuvola 400W Fc2 M.H. on 32’ high pole.Average illumination Em=1.2 f.c.Uniformity g1=0.43
L=26’
height h output width of road interdistance ave.illum.
pole h = 18’ 250W L = 24’ ld = 54’ 2 fc
Light pollution
Nuvola, via the optics of the Lingotto floodlight, directs the light towards the screen to diffuse the light downwards. The reflector and projector design limit upward dispersion to below 5%.
6
Photometric files are available at: www.iguzzini-na.com/downloads
Nuvoladesign: R. Piano & Mecano
NuvolaOptical assembly with reflector screenI.4160-120 250W T9.5 Fc2 I.4160-277 250W T9.5 Fc2
Complete with HPF integral magnetic ballastPole not included.
3'-1
1-1/
4"
4'-6-3/4"16-3/8"
Nuvola TwinOptical assembly with reflector screenI.4172-120 2x250W T9.5 Fc2I.4172-277 2x250W T9.5 Fc2
Complete with HPF integral magnetic ballastPole not included.
3'-1
1-1/
4"
9'-1-1/2"
code lamp
15
7
Photometric files are available at: www.iguzzini-na.com/downloads
Nuvoladesign: R. Piano & Mecano
15
Banners must be of the technically specified size.
Banners must be firmly fixed lengthwise by a steel cable which is held with a double anchoring system.
Banners are fixed to a sup-porting bar with a special hem and held taut by a stiffening rib sown into the actual hem. This installa-tion ensures that the flut-tering movements do not cause unsightly wavering in the fabric.
142”
142”
142”
142”
31”
1-1/8”
4”
Nuvola Banner holderI.1345
The diagram illustrates the correct installation position of the banner on single and twin floodlight applications. Banners must always be installed parallel to the reflector screen in order to resist dynamic wind thrust, as shown in the diagram.
8
The smaller Nuvola version extends and completes the indirect lighting product range. Its small size and wall mounting feature make the MiniNuvola the ideal choice for installations in public areas, gardens, historical and artistic centres.
Pole not included.
9
design: Piano Design WorkshopMininuvola
Suggested Height:16’
10
design: Piano Design WorkshopMininuvola
MiniNuvola is an indirect lighting system for exterior applications designed for metal halide discharge lamps.The system includes:– floodIight in die-cast aluminum,
– control gear in separate box,
– reflecting panel made from polyester resin reinforced with fibergIass,
– die-cast aluminum mounting brackets.
The luminous flux emitted upward by MiniNuvola luminaire is less than 5%.
Stability under a load of snow is ensured up to a weight of 450 Ibs.
This fixture is rated IP55. UL Listed “Suitable for wet location”
Light pollution
Mini Nuvola, via the optics of the Lingotto floodlight, directs the light towards the screen to diffuse the light downwards. The reflector and projector design limit upward dispersion to below 5%.
Pole not included.
11
Photometric files are available at: www.iguzzini-na.com/downloads
design: Piano Design WorkshopMininuvola
MiniNuvolaOptical assembly with reflector screenI.7739-120 150W T6 RX7s double endedI.7739-277 150W T6 RX7s double ended
Complete with integral electronic ballast Pole not included.
MiniNuvola wallOptical assembly with reflector screenI.7741-120 150W T6 RX7s double endedI.7741-277 150W T6 RX7s double ended
Complete with integral electronic ballast
3'-9"
3'-0
-1/4
"3'
-0-1
/4"
3'-7-5/8"
Ex-Centris, André Riopel, Architect
code lamp
15
12
Photometric files are available at: www.iguzzini-na.com/downloads
design: Piano Design WorkshopTechnical specifications for Nuvola pole
3'-6"
Ø 4-1/2"
POLE FOR NUVOLA TWIN I.4172
4-1/2" DIA.CYLINDRICAL POLE (SUPPLIED BY OTHERS)
5'-11-1/8"
OPTIMAL LOCATION FORLINGOTTO FLOODLIGHT250W METAL HALIDE
19-1/2"APPROX.
16-3/8" 4'-6-3/4"
2-1/4" DIA. HOLEFOR WIRE FEED
2-1/4" DIA. HOLEFOR WIRE FEED
1/2" DIA. HOLEFOR WIREBUSHING
2-1/4"
4-1/2" DIA.CYLINDRICAL POLE (SUPPLIED BY OTHERS)
9'-1-1/2"
OPTIMAL LOCATION FORLINGOTTO FLOODLIGHT250W METAL HALIDE
4'-6-3/4"
POLE FOR NUVOLA I.4160
1/2" DIA. HOLEFOR WIRE BUSHING
4'-0"
Technical information to be used by local pole supplier.
13
Photometric files are available at: www.iguzzini-na.com/downloads
design: Piano Design WorkshopTechnical specifications for Nuvola pole
3'-9"(1145 mm)
2'-1-7/8"(660 mm)
Ø 4" CYLINDRICAL STEEL POLE(PROVIDED BY OTHERS)
OPTIMAL LOCATION FORLINGOTTO FLOODLIGHT150W METAL HALIDE
POLE FOR MININUVOLA I.7739
REFLECTOR SCREEN
BALLAST HOUSING FORLINGOTTO FLOODLIGHT
BALLAST HOUSING FORLINGOTTO FLOODLIGHT
Ø 4"
(102 mm)
4"(102mm)
3-3/4"(95mm)
6"(152mm)
TAP HOLEFOR 1/4-20 SCREW
(X2,TYP.)
Ø 3/4" HOLEFOR WIRE BUSHING
TAP HOLE FOR 1/4-20 SCREW (X2,TYP.)
Ø 3/4" HOLE FORWIRE BUSHING
DETAIL VIEW
ISOMETRICFRONT VIEW
ISOMETRICBACK VIEW
Ø 4" CYLINDRICAL STEEL POLE(PROVIDED BY OTHERS)
MOUNTING BRACKET(INCLUDED)
1/4-20 SCREWS (X2)
15"(381 mm)
Technical information to be used by local pole supplier.
14
Pole application
Ground application
Wall application
Pole not included.
design: Renzo PianoLingotto
Ground application
Wall application
The design of the Lingotto lighting system draws its inspiration from a basic geometric shape: an irregular truncated pyramid, which is made of cast aluminum.
15
16
design: Renzo PianoLingotto
The optical assembly is available in two sizes:
17
design: Renzo PianoLingotto
The flood optic (F) provides a broad, uniform light which is particularly suitable for illuminating public areas, facades and large spaces.
The asymmetrical optic (A) emits its greatest intensity of light at 45°. Limiting direct glare, it enables large spaces to be illuminated without producing stray light. It is suitable for lighting urban areas.
The medium optic (M) provides a uniform flow of light, at the same time controlling glare. It is suitable for lighting up large spaces, fronts of buildings and outside areas.
The spot optic (S) is used to highlight architectural details. Concentrating the light flow of the lamp and avoiding the dispersal of light into the environment, it minimizes glare and light pollution.
29’
23’
16’
36’
26’
16’
29’
23’
16’
6’
6’
16’
18
design: Renzo PianoLingotto
The Lingotto optical compartment is made of die-cast aluminum. The doorframe enclosing the tempered glass lens is also made of die-cast aluminum and has a silicon gasket to seal the fixture from dust and water.
For fixtures with M.H. lamps, the ballast is enclosed in an alumi-num box which is connected to the optical assembly with an armoured cable.
Here, the Lingotto is shown with open door frame for maintenance.
The hinge component enables the chassis to rotate vertically (180°) and horizontally (360°) on various supports.
19
design: Renzo PianoLingotto
The Lingotto fixture is composed of: a die-cast aluminum housing, a reflector of 99.85% super-pure aluminum, and a tempered glass lens with silicon gasket, held in place by the die-cast door assembly. All hardware is made of stain-less steel for superior corrosion resistance. Four different optics are available to suit most lighting needs.
The components needed for the M.H. fixtures are contained in a special aluminum ballast box.
The optical assembly is connected to the ballast box by a hinge assembly enabling the chassis to rotate 180° vertically. The fixture is standard with a grey painted finish and a yellow hinge assembly.
The technical characteristics of the fixture comply with EN60598-1 standard.
This fixture is rated IP55. UL Listed “Suitable for wet location”
Light pollution
The Lingotto asymmetrical optic (A), medium optic (M), spot optic (S) are ideal to light large urban areas without producing stray light while it emits with great intensity. Therefore, it enables designers to control light pollution and spills and limit direct glare.
20
design: Renzo PianoLingotto
23-5
/8"
5-13/16"
9-1/16"
12-3
/16"
13-3
/4"
4-3/
4"
Lingotto floodlight – large optical assemblyI.7019-120 250W T9.5 Fc2 AI.7019-277 250W T9.5 Fc2 A
Complete with HPF integral magnetic ballast
I.7029-120 250W T9.5 Fc2 FI.7029-277 250W T9.5 Fc2 F
Complete with HPF integral magnetic ballast
I.7034-120 250 W T9.5 Fc2 SI.7034-277 250 W T9.5 Fc2 S
Complete with HPF integral magnetic ballast
(61˚/100˚)
(89˚/92˚)
(10˚/31˚)
code lamp
LACMALos AngelesRenzo Piano Building Workshop & Arup Lighting
73
21
Photometric files are available at: www.iguzzini-na.com/downloads
design: Renzo PianoLingotto
Lingotto floodlight – small optical assemblyI.7017-120 150W T6 RX7s AI.7017-277 150W T6 RX7s A
Complete with HPF integral magnetic ballast
I.7027-120 150W T6 RX7s FI.7027-277 150W T6 RX7s F
Complete with HPF integral magnetic ballast
I.7032-120 150W T6 RX7s SI.7032-277 150W T6 RX7s S
Complete with HPF integral magnetic ballast
19-1
1/16
"
5-13/16"
7-1/16"
10-1
/4"
10-5
/8"
9-7/
16"
4-3/
4"
(65˚/104˚)
(47˚/90˚)
code lamp
Baffle I.1177
for I.7017, I.7027, I.7032 I.1178
for I.7019, I.7024, I.7029, I.7034Available in color 02
Cut-off ShieldI.1175
for I.7019, I.7024, I.7029, I.7034 I.1176
for I.7017, I.7027, I.7032Available in color 02
Steel plate for wall mountI.1172
for I.7017, I.7019, I.7024, I.7027, I.7029, I.7032, I.7034
Cast-iron plate for ground and/or wall installation I.1173
for I.7017, I.7019, I.7024, I.7027, I.7029, I.7032, I.7034Available in color 15
Bolts with plate for ground installationI.0456
for I.1173
Steel plate for pole application ø 1-5/8” to ø 2-3/8” I.1170
Steel plate for pole applicationø 1-5/8” to ø 4” I.1171
for I.7017, I.7019, I.7024, I.7027, I.7029, I.7032, I.7034
(10˚/31˚)
accessories
code
73
22
Photometric files are available at: www.iguzzini-na.com/downloads
design: Renzo PianoLingotto
Lingotto floodlight – small optical assembly I.7012-120 150W T6 RX7s FI.7012-277 150W T6 RX7s F Complete with Integral electronic ballast 26
-3/4
"
27-3/8"
Lingotto floodlight – small optical assemblyI.7013 300W T3 RSC F
26-3
/4"
27-3/8"
(47˚/90˚)
(47˚/89˚)
code lamp
73
23
Photometric files are available at: www.iguzzini-na.com/downloads
design: Renzo PianoLingotto
Lingotto floodlight – small optical assembly I.7018 300W T3 RSC AI.7028 300W T3 RSC F
6-11/16"
8-7/16"
9-7/
16"
10-5
/8"
Baffle I.1177
for I.7012, I.7013, I.7018, I.7028I.1178
for I.7014Available in color 02
Cut-off shieldI.1175
for 7014I.1176 for I.7012, I.7013, I.7018, I.7028
Available in color 02
Steel plate for ground and/or wall mountI.1174
for I.7018, I.7028
Available in color 15
Bolts and plate for ground installationI.0456
for I.1174
Terminal box for surface mounting applicationI.1179
for I.7018, I.7028
Available in color 15
Steel flange for pole applicationI.1170 pole ø 1-5/8” to ø 2-38” I.1171 pole ø 2-3/8” to ø 4” for I.7018, I.7028
(65˚/104˚)
(47˚/89˚)
code lamp
accessories
code code
73
24
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaPlatea
Light pollution
Platea superspot optical systems provide designers with new tools for controlling light pollution and spill. Beam concentra-tion enables the highlighting of details and architectural features while minimizing the uncontrolled dispersal of light into the environment. The addition of concentric baffles will further reduce spill and glare.
Superspot 5° (SS)
The Platea floodlight was created to meet the demand for improved functional and decorative lighting in urban spaces. Fixtures are available with different reflector configurations: asymmetric, flood, spot, super spot, longitudinal linear and roadway. These fixtures are made of die-cast aluminum with stainless steel hardware. A hinged front with a tempered glass lens and silicon gasket allows for easy access to the optical compartment for servicing the lamp. The technical characteristics comply with EN60598-1 standard.
All fixtures have an IP66 rating which protects the fixtures from intrusion of dust and moisture from even high-pressure water jets.
UL Listed “Suitable for wet location”
d L1xL2 Emax Emed
15 ft 1.5 ft 1575 fc 930 fc
30 ft 2.7 ft 395 fc 258 fc
45 ft 4.05 ft 175 fc 115 fc
60 ft 5.4 ft 98 fc 65 fc
150W T7.5 G12
with 5° reflector
25
design: Mario CucinellaPlatea
Platea is manufactured to a class II standard of insulation. This ensures greater safety as it prevents even accidental contact between the live parts and the body of the unit. Installation and main-tenance costs are reduced since there is no need to ground the unit.
Fixture shown with hinged front door open for maintenance opera-tions.
The concentric baffle, positioned inside the optical assembly, elimi-nates glare.
lamp
optic
asymmetrical A
asymmetrical AL linear
flood F
spot S
transversal L linear
longitudinal linear LL
superspot 5˚ SS
road lighting ST
70W
150W
70W
150W
70W
150W
70W
150W
70W
150W
70W
150W
300W
300W
70W
150W
70W
150W
70W
150W
2x26W
The system can use a wide variety of energy-saving high-efficiency light sources.
T4-T Gx24q-3 T6 RX7s T6 G12 T3 RSC T7.5 G12
26
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaPlatea
The Platea is especially suited for mounting on walls of buildings. The various lighting distributions work equally well for either up lighting or lighting walkways.
When mounted and aimed down at 0°, the Platea is a full cut-off luminaire. See below for various distribution patterns.
Flood Optic (F) – The best use of the flood optic is as external lighting of large spaces.
Asymmetric Optics (A) – The asymmetric optical system has the greatest intensity at 45°. It projects the light forward without need for up tilt of the fixture. Glare and light pollution are therefore greatly reduced. This also reduces the amount of light on the mount wall, thereby reducing the resulting effect of the reflected light.
Asymmetric Linear (AL) – The asymmetric linear optical system combines the features of the asymmetric optics with the linear spread lens. It is helpful when trying to achieve a more discrete lighting pattern on a walkway.
Transversal Linear Optics (L) – Combines the features of the spot optic with the linear spread lens. This can be very effective for lighting narrow walkways or for façade lighting.
Cité du multimedia, Lemay & ass. Architect
h L1xL2 Emax Emed a
9 ft 30x18 ft 28.5 fc 6.3 fc 18 ft
15 ft 30x30 ft 10.5 fc 3.7 fc 30 ft
30 ft 45x60 ft 2.6 fc 1.1 fc 60 ft
45 ft 60x30 ft 1.2 fc 0.5 fc 90 ft
150W T6 RX7s
h L1xL2 Emax Emed a
9 ft 30x18 ft 28.6 fc 6.3 fc 18 ft
15 ft 30x30 ft 8.6 fc 2.9 fc 30 ft
30 ft 45x60 ft 2.1 fc 0.9 fc 60 ft
45 ft 60x30 ft 1.0 fc 0.4 fc 90 ft
150W T6 RX7s
h L1xL2 Emax Emed a
9 ft 6x15 ft 64.0 fc 24.4 fc 16.5 ft
15 ft 9x27 ft 25.0 fc 12.1 fc 27 ft
30 ft 21x54 ft 6.4 fc 2.5 fc 54 ft
45 ft 30x78 ft 2.9 fc 1.2 fc 78 ft
150W T7.5 G12
h L1xL2 Emax Emed a
9 ft 12x15 ft 63 fc 17.7 fc 15 ft
15 ft 21x24 ft 22.7 fc 6.2 fc 24 ft
30 ft 39x51 ft 5.7 fc 2.2 fc 51 ft
45 ft 60x25 ft 2.5 fc 1.1 fc 75 ft
150W T6 RX7s
27
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaPlatea
Flood Optic (F) – The flood optic enables large spaces to be illuminated. The Platea floodlight is equipped with accessories such as a baffle and screen to prevent possible glare and dispersal of light in unwanted directions.
Asymmetric Optic (A) – The asymmetric optic has its greatest luminosity at 45°. It projects the light flow forwards without any need for the unit to be angled: glare and light pollution are therefore reduced to minimum.
Longitudinal Linear (LL) – The linear spread lens is oriented vertically to provide narrow width and elongated beam. This can be very useful when highlighting either a column or other vertical architectural features.
Spot Optics (S) – This distribution is used to accent architectural features or for more intensity at greater distances.
h L1xL2 Emax Emed a
9 ft 30x18 ft 28.5 fc 6.3 fc 18 ft
15 ft 30x30 ft 10.5 fc 3.7 fc 30 ft
30 ft 45x60 ft 2.6 fc 1.1 fc 60 ft
45 ft 60x90 ft 1.2 fc 0.5 fc 90 ft
150W T6 RX7s
d L1xL2 Emax Emed a
9 ft 6x15 ft 151.9 fc 89.3 fc –
15 ft 9x18 ft 61.9 fc 13.6 fc –
30 ft 21x54 ft 15.5 fc 9.8 fc –
45 ft 30x78 ft 6.9 fc 4.1 fc –
150W T7.5 G12
d L1xL2 Emax Emed a
9 ft 12x15 ft 63 fc 17.7 fc 15 ft
15 ft 21x24 ft 22.7 fc 6.2 fc 24 ft
30 ft 39x51 ft 5.7 fc 2.2 fc 51 ft
45 ft 60x75 ft 2.5 fc 1.1 fc 75 ft
150W T6 RX7s
d L1xL2 Emax Emed a
9 ft 6x15 ft 64 fc 24.4 fc –
15 ft 9x27 ft 25 fc 12.1 fc –
30 ft 21x54 ft 6.4 fc 2.5 fc –
45 ft 30x78 ft 2.9 fc 1.2 fc –
150W T7.5 G12
28
design: Mario CucinellaPlatea
29
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaPlatea
17"
5-3/
4"9-
7/8"
Platea superspot floodlight 5°I.7475-120 70W T6 G12 SSI.7475-277 70W T6 G12 SS
I.7476-120 150W T6 G12 SSI.7476-277 150W T6 G12 SS
Complete with integral electronic ballast
Platea spot floodlightI.7385-120 70W T7.5 G12 SI.7385-277 70W T7.5 G12 SI.7386-120 150W T7.5 G12 SI.7386-277 150W T7.5 G12 S
Complete with integral electronic ballast
17"
5-3/4"
(6˚)
(4˚)
(52˚/33˚)
code lamp
15
30
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaPlatea
Platea asymmetrical floodlightI.7377-120 70W T6 RX7s AI.7377-277 70W T6 RX7s AI.7378-120 150W T6 RX7s AI.7378-277 150W T6 RX7s AI.7393 300W T3 RSC A
Complete with integral electronic ballast
Platea flood floodlightI.7376-120 2x26 T4-T Gx24q-3 FI.7376-277 2x26 T4-T Gx24q-3 F
I.7379-120 70W T6 RX7s FI.7379-277 70W T6 RX7s FI.7380-120 150W T6 RX7s FI.7380-277 150W T6 RX7s FI.7392 300W T3 RSC F
Complete with integral electronic ballast
Platea transversal linear floodlightI.7387-120 70W T7.5 G12 LI.7387-277 70W T7.5 G12 LI.7388-120 150W T7.5 G12 LI.7388-277 150W T7.5 G12 L
Complete with integral electronic ballast
Platea longitudinal linear floodlightI.7399-120 150W T7.5 G12 LLI.7399-277 150W T7.5 G12 LL
Complete with integral electronic ballast
Platea asymmetric linear floodlightI.7396-120 70W T6 RX7s ALI.7396-277 70W T6 RX7s ALI.7397-120 150W T6 RX7s ALI.7397-277 150W T6 RX7s AL
Complete with integral electronic ballast
17"
5-3/
4"9-
7/8"
(36˚/94˚)
(72˚/96˚)
(72˚/41˚)
(72˚/31˚)
(46˚/76˚)
(124˚/39˚)
code lamp
15
31
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaPlatea
Platea road lighting floodlightI.7444-120 70W T6 G12 ST I.7444-277 70W T6 G12 ST I.7445-120 150W T6 G12 ST I.7445-277 150W T6 G12 ST
I.7698-120 70W T6 RX7s STI.7698-277 70W T6 RX7s STI.7699-120 150W T6 RX7s STI.7699-277 150W T6 RX7s ST
Complete with integral electronic ballast
17"
5-3/
4"9-
7/8"
Circular baffle I.4452
for I.7473, I.7474I.4453
for I.7475, I.7476
Available in color 02
Wall washer screen I.1176
for I.7376, I.7379, I.7380, I.7385,I.7386, I.7387, I.7388, I.7392
Available in color 02
Linear baffle I.1177
for I.7376, I.7379, I.7380, I.7385, I.7386, I.7392
Available in color 02
Platea pole armI.1148 pole ø 3-1/8” to 4-3/4”
Platea wall armI.1149
21-1/8”
24-7/8”
12”
12”
code lamp
accessories
code
15
Woody dischargePage 41(Ground application)
Woody dischargePage 41(Pole application)
MiniWoodyPage 38(Ground application)
Pole not included.
32
33
design: Mario CucinellaMiniWoody – Woody
The MiniWoody and Woody are available with two different types of optics: flood and spot. These lights offer a range of accessories which enable an ideal installation in a variety of locations.
MiniWoody Page 37(Above display application)
MiniWoody Page 36(Surface application)
WoodyPage 38 (Surface application)
Woody dischargePage 41(Wall application)
34
design: Mario CucinellaMiniWoody – Woody
MiniWoody and Woody floodlight components are made of die-cast aluminum and supplied with a 99.85% super-pure aluminum reflectors. The optical assembly is closed at the front with a die-cast ring with tempered safety glass lens and silicon gasket to ensure a dust and weather-tight seal. The fixtures are equipped with a locking device to allow adjustment in both the vertical and horizontal axis. This adjustment can be locked in place. Two optical systems are available: spot and flood. The low voltage fixtures are supplied with an integral transformer, available in 120V or 277V. All hardware is stainless steel for superior corrosion resistance. The technical characteristics of fixtures comply with to EN60598-1 standard.
This fixture is rated IP66. UL Listed “Suitable for wet location”
With the MiniWoody and Woody, it is possible to create the most suitable distribution of light for the shape and dimensions of the feature to be illuminated.
Flood (F)
The flood beam allows a uniform distribution of light over large surfaces.
Spot (S)
This type of beam enables details and small features to be illuminated.
Linear Spread
The linear spread lens used with the spot beam creates an elliptical distribution of light. This is ideal for illuminating features which are thin but tall or wide.
35
design: Mario CucinellaMiniWoody – Woody
The MiniWoody and Woody projectors are equipped with an adjustable lampholder to adjust the beam without opening the fixture and while the fixture is operating. This feature is only available on fixtures with the T4 GY 6.35 lamps.
MiniWoody flood – F MiniWoody spot – S
The Woody low voltage version has a beam ajustment device for spot of 4°-10° and for flood of 14°-15°.
36
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaMiniWoody
MiniWoody spot with baseI.B584-120 50W 12V T4 GY 6.35 SI.B584-277 50W 12V T4 GY 6.35 S
Complete with integral electronic transformer
MiniWoody flood with baseI.B585-120 50W 12V T4 GY 6.35 FI.B585-277 50W 12V T4 GY 6.35 F
Complete with integral electronic transformer
5"
4"
ø 3-
3/8"
8-1/
8"
Narrowest distribution of light setting
Widest distribution of light setting
Narrowest distribution of light setting
Widest distribution of light setting
Newtown restaurant, Montreal, Francois Roupinian, Lighting Designer
(6˚)
(24˚)
(24˚)
(56˚)
code lamp
37
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaMiniWoody
Miniwoody flood with armI.B593-120 50W 12V T4 GY 6.35 FI.B593-277 50W 12V T4 GY 6.35 F
Complete with integral ele ctronic transformer
Flange plate with boltsI.1184
5"
34-1/2"
4"
ø 3-3/8"
Linear spread lens for elliptical distribution I.1181
for I.B584
Available in color 24
VisorI.1182
for I.B584, I.B585, I.B593
Available in color 15
Strap for landscape applicationSection = 1-5/8” x 4-3/4” I.1183 for I.B584, I.B585
Stainless steel plate with spike for landscape applicationI.B988
for I.B584, I.B585
code lamp
accessories
code
15
38
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaWoody
Woody spot with baseI.7334-120 50W 12V T4 GY 6.35 SI.7334-277 50W 12V T4 GY 6.35 S
Complete with integral electronic transformer
Woody flood with baseI.7335-120 50W 12V T4 GY 6.35 FI.7335-277 50W 12V T4 GY 6.35 F
Complete with integral electronic transformer
Woody spot with baseI.7338 100W 120V Halogen Hal Q/DC S
Woody flood with baseI.7339 100W 120V Halogen Hal Q/DC F
Woody flood with armI.7350-120 50W 12V T4 GY 6.35 FI.7350-277 50W 12V T4 GY 6.35 F
Complete with integral electronic transformer
Woody flood with armI.7352 100W 120V Halogen Hal Q/DC F
Woody with stakeI.7353-120 50W 12V T4 GY 6.35 SI.7353-277 50W 12V T4 GY 6.35 SI.7354-120 50W 12V T4 GY 6.35 FI.7354-277 50W 12V T4 GY 6.35 F
Complete with integral electronic transformer
Woody with stakeI.7357 100W 120V Halogen Hal Q/DC SI.7358 100W 120V Halogen Hal Q/DC F
Complete with supply cable L = 9 ft.
ø 4"
6-1/2"
ø 5-
1/2"
9"
6-1/
2"
ø 5-1/2"
4-3/
4"
37-3/8"
6-1/2"
ø 5-
1/2"
13-3
/8"
10-5
/8"
Narrowest distribution of light setting
Widest distribution of light setting
(4˚)
(14˚)
(14˚)
(43˚)
code lamp
15
39
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaWoody
Linear spread lens for elliptical distributionI.1185
for I.7334, I.7353
Available in color 24
Visor I.1186
for I.7334, I.7335, I.7338, I.7339, I.7348, I.7352, I.7353, I.7354, I.7357, I.7358, I.7362Available in color 15
Inside corner base (90° angle) I.1189
for I.7334, I.7335, I.7338, I.7339
Available in color 15
Outside corner base(90° corner)I.1188
for I.7334, I.7335, I.7338, I.7339
Available in color 15
Pipe clamp mount Diameter = 1-5/8” x 3-1/8” I.1190
for I.7334, I.7335, I.7338, I.7339
Available in color 15
Strap for landscape applicationSection = 1-5/8” x 4-3/4” I.1187
for I.7334, I.7335, I.7338, I.7339
accessories
code
15
40
design: Mario CucinellaWoody discharge
Floodlights are made of die-cast aluminum and supplied with a 99.85% superpure aluminum reflector. The box is made of extruded aluminum with cast aluminum plugs. The compart-ment is closed at the front by a die-cast ring with a protective glass cover and silicone gasket to ensure a dust and water-tight seal. The fixtures have joints for horizontal and vertical adjustment with the possibility of locking the position. There are two different kinds of optic: flood and spot.
This serie is supplied with integral electronic ballast of 120V and 277V.
Screws and bolts are made of stainless steel. The technical characteristics of the fixture comply with EN 60598-1 standard.
This fixture is rated IP66. UL Listed “Suitable for wet location”
The pole mounting, with the single or twin floodlight, and the wall mount solutions highlight the system’s versatility and its modern and functional design features.
With Woody serie optics, it is possible to create the most suitable distribution of light for the shape and dimensions of the features to be illuminated.
Flood Spot Shaft of light (possible with linear spread lens)
1 Mounting on a low wall
2 Mounting on a pole
3 Twin mounting on a pole
4 Wall mounting
41
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaWoody discharge
Woody discharge spotI.7591-120 35W T6 G12 SI.7591-277 35W T6 G12 S
I.7593-120 70W T6 G12 SI.7593-277 70W T6 G12 S
Complete with integral electronic ballast
Woody discharge floodI.7592-120 35W T6 G12 FI.7592-277 35W T6 G12 F
I.7594-120 70W T6 G12 FI.7594-277 70W T6 G12 F Complete with integral electronic ballast
Linear spread lens for elliptical distributionI.1185
for I.7591, I.7593
Available in color 24
Visor I.1186
for I.7591, I.7592, I.7593, I.7594
Available in color 15
Support for wall application I.5928
for I.7591, I.7592, I.7593, I.7594
Available in color 15
Fastening plate for ground application I.5927
for I.7591, I.7592, I.7593, I.7594
Available in color 15
Support for double application on pole I.5930 pole ø 3-1/8” to 4-3/4”for I.7591, I.7592, I.7593, I.7594
Available in color 15
Support for pole application I.5929 pole ø 3-1/8” to 4-3/4”for I.7591, I.7592, I.7593, I.7594
Available in color 15
6-1/2"
ø 5-
1/2"
ø 4-1/4"
8-3/
4"
(16˚)
(51˚/19˚)
(38˚)
code lamp
accessories
code
15
42
43
design: Mario CucinellaMaxiWoody
Woody was created in 1996. Its success attributed to its simple rounded design, which is distinctive and instantly recognizable, and led to the development of a whole family of lamps offering a wide scope of applications in the lighting of buildings and urban areas. With the MaxiWoody the shape was taken a step further to respond to different needs of output and application, while the spirit remains unchanged: for a contemporary design and operational reliability.
The comprehensive nature of the MaxiWoody, its versatility, faithful attention to every detail, photometric performance and straightforward maintenance all distinguish the evolution of this new instrument dedicated to lighting public areas. MaxiWoody can provide quality lighting without neglecting the urban decor.
This product has been awarded the – IF Design Award 2003
44
design: Mario CucinellaMaxiWoody
Superspot Optic (SS)
Superspot makes it possible to optimize definition of architectural features, eliminating stray light. It is ideal for illuminating from a distance and targeting details of reduced dimensions.
and columns.
features by positioning projec-tors at a distance.
Spot Optic (S)
Spot is ideal to define architectural features without stray light. It is recommended for grouped applica-tions and for highlighting features of medium dimensions.
columns.
features by positioning projec-tors at a distance.
Medium Optic (M)
Medium optic enables downward or upward illumination of tall build-ing facades and pedestrian areas from the top of adjacent buildings, with excellent distribution of lightflow over the surface
Flood Optic (F)
The best use of flood is for lighting wide outdoor spaces; in addition, it is able to provide compensation lighting.
accent lighting.
Flexibility is the most significant value when it comes to public lighting systems. MaxiWoody has the possibility of combining fixtures with a comprehensive range of photometric distributions. It comes in a choice of four different optical systems: superspot, spot, medium and flood. Light sliver and elliptical optics are available using accessory lenses. This range of possiblility will satisfy most lighting project requirements. Light must enhance objects, as well as illuminate surfaces without glare. MaxiWoody ensures the designer a maximum flexibility in optimizing the design of a project with an articulate combination of the optical and luminous instruments.
Monte Carlo Hotel, Las Vegas
45
design: Mario CucinellaMaxiWoody
Longitudinal Linear
Optic (LL)
The optic can be used to illuminate vertical architectural features.
lighting.
Elliptical Optic (E)
This optic combines the character-istics of the light sliver optic with those of the medium optic, and is suitable for illuminating both horizontal and vertical surfaces.
general.
with soft lighting.
Light is the language of design. It is an interpretation of space. MaxiWoody is a versatile tool designed for lighting many different spaces. The use of ground, wall or pole mounting brackets provide solutions for all applications. The combination of mounting options and multiple beam patterns allow the lighting designer to create many different looks and moods.
LACMA, Los Angeles, Renzo Piano Building Workshop & Arup Lighting
46
design: Mario CucinellaMaxiWoody
MaxiWoody is designed to be used in many different applica-tions. The use of dichroic lenses and spread lenses allows the designer to accomplish many different effects.
Light pollution
A wide range of accessories enable maximum control of the luminous flux to ensure full compliance with even the most stringent light regulations. The concentric ring louver offers 45° shielding while the visor completely cutoff direct glare. The individually adjustable louvers or adjustable barn doors become indispensable tools in limiting unwanted glare and spill light.
47
design: Mario CucinellaMaxiWoody
MaxiWoody is the evolution of a technological idea that simplifies installation, enables precise angle setting and improve maintenance operations.
iGuzzini’s experience in designing architectural lighting, coupled with its
photometric research, has enabled the fine-tuning of every technical and functional details.
MaxiWoody has compact dimensions and an integral ballast. It can be opened with ease and has room to use multiple accessories.
Spread lens for elliptical distribution of the light flow and color filter (red, yellow, blue).
Circular louver and color filter.
Decompression valve makes it easier to access the optical assembly by balancing inter-nal and external pressure.
Retention cable for internal accessories.
Double cable-clamp for through wiring. Cable maximum diameter 5/8”.
Special apertures on the frame allow rainwater to run off.
Internal accessories are protected from the external environment and can be combined with one another.
48
design: Mario CucinellaMaxiWoody
1 2 3
4 5 6
Routine maintenance
1 When open, the frame stays attached to the body with a steel cable. The captive screws remain in their seats
2 The accessories are mechani-cally locked in place by means of a double spring system.
3 The frame closure system guarantees correct compression of the front gasket.
Non-routine maintenance
4 Open the rear cover, then disconnect the cables from the terminal box.
5 Disconnect the lampholder cable connector.
6 Loosen the captive screws and remove the accessory holder plate.
49
design: Mario CucinellaMaxiWoody
MaxiWoody is a projector for external use designed for quartz or ceramic discharge metal halide lamps from 70 to 400W. The reflector is 99.98% superpure aluminum, anodized and polished. The optical assembly is equipped with closing glass and sealing gasket at the front, guaranteeing water tightness. Special apertures on the frame allow rainwater to run off. The projector offers seven different types of lumi-nous distribution (superspot, spot, medium, flood, longitudinal linear, elliptical and road). The fixture is equipped with a double cord grip for through wiring. MaxiWoody can be adjusted on the vertical axis using graduated bracket with a 10° increments precision. It is equipped with mechanical locking devices to guarantee the stability of the light beam after aiming. Hori-zontal adjustment is done by fixing a plate to a cement base.
In addition to ground installation, wall and pole mounting are also possible. The installation was designed to allow for an easy maintenance. Access to the optical assembly is simplified by the use of a decompression valve to eliminate the problem of lower internal pressure. All components are mounted on a single plate with captive screws, enabling rapid non-routine maintenance operations. The liquid acrylic paint on the frame gives maximum protection against outdoor conditions and UV rays. The technical characteristics comply with EN60598-1 standard.
The fixture is rated IP67. UL Listed “Suitable for wet location”
Retained safety screws
Die-cast aluminum frame
Die-cast aluminum external body
Rear closure section with retained safety screws
Double cable-clamp for 16-mm diameter cables
Galvanized steel brackets with graduated scale for angle adjustment to 10°
Tempered glass
Retaining cable
frame with glass
50
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaMaxiWoody small version
12-1/2”
ø 12
-3/8
”
14”
12-1/2”
ø 12
-3/8
”
Linear spread lens for elliptical distribution I.1195
for I.5650, I.5651, I.5652, I.5675, I.5676, I.5677
Available in color 24
Colored filtersI.1158
for I.5650, I.5651, I.5652, I.5675, I.5676, I.5677
Available in colors 00-05, 06, 09
Visor I.5940
for I.5650, I.5651, I.5652
Available in color 15
Single barn doorI.5937
for I.5650, I.5651, I.5652
Available in color 02
Circular louver I.5952
for I.5650, I.5651, I.5652, I.5675, I.5676, I.5677
Available in color 02
Protection gridI.5943
for I.5650, I.5651, I.5652
Available in color 11
Ground anchoring flangeI.5951
for I.5650, I.5651, I.5652
Available in color 15
Accessory retention cable I.5949 for I.5650, I.5651, I.5652, I.5675, I.5676, I.5677
code lamp
accessories
code code
Projector complete with mounting bracketI.5650-120 70W T6 G12 SSI.5650-277 70W T6 G12 SSI.5651-120 70W T6 G12 MI.5651-277 70W T6 G12 MI.5652-120 70W E17 Clear E26 Med. SS 70W E17 Coated E26 Med. MI.5652-277 70W E17 Clear E26 Med. SS 70W E17 Coated E26 Med. MI.5684-120 70W T6 RX7s STI.5684-277 70W T6 RX7s ST
Projector for pole or frame mounting (see page 53 and 56)I.5675-120 70W T6 G12 SSI.5675-277 70W T6 G12 SSI.5676-120 70W T6 G12 MI.5676-277 70W T6 G12 MI.5677-120 70W E17 Clear E26 Med. SS 70W E17 Coated E26 Med. MI.5677-277 70W E17 Clear E26 Med. SS 70W E17 Coated E26 Med. MI.5685-120 70W T6 RX7s STI.5685-277 70W T6 RX7s ST
15
51
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaMaxiWoody medium version
Projector complete with mounting bracketI.5658-120 150W T6 G12 SSI.5658-277 150W T6 G12 SSI.5659-120 150W T6 G12 MI.5659-277 150W T6 G12 MI.5660-120 150W E17 Clear E26 Med. S 150W E17 Coated E26 Med. MI.5660-277 150W E17 Clear E26 Med. S 150W E17 Coated E26 Med. MI.5666-120 150W T6 RX7s STI.5666-277 150W T6 RX7s ST
Projector for frame mounting application (see p. 56)I.5680-120 150W T6 G12 SSI.5680-277 150W T6 G12 SSI.5681-120 150W T6 G12 MI.5681-277 150W T6 G12 MI.5682-120 150W E17 Clear E26 Med. S 150W E17 Coated E26 Med. MI.5682-277 150W E17 Clear E26 Med. S 150W E17 Coated E26 Med. MI.5683-120 150W T6 RX7s STI.5683-277 150W T6 RX7s ST
13-7/8”
ø 15
”
16-7
/8”
13-7/8”
ø 15
”
Linear spread lens for elliptical distribution I.1196
for I.5658, I.5659, I.5660, I.5680, I.5681, I.5682
Available in color 24
Colored filter I.1159
for I.5658, I.5659, I.5660, I.5680, I.5681, I.5682
Available in colors 00, 05, 06, 09
Visor I.5941
for I.5658, I.5659, I.5660
Available in color 15
Single barn door I.5938
for I.5658, I.5659, I.5660
Available in color 02
Circular louver I.5953
for I.5658, I.5659, I.5660, I.5680, I.5681, I.5682
Available in color 02
Protection grid I.5944
for I.5658, I.5659, I.5660
Available in color 11
Ground anchoring flange I.5951
for I.5658, I.5659, I.5660
Available in color 15
Accessory retention cable I.5949
for I.5658, I.5659, I.5660, I.5680, I.5681, I.5682
code lamp
accessories
code code
15
52
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaMaxiWoody large version
20-1/2”
ø 19
”
21”
Linear spread lens for elliptical distributionI.1197
Available in color 24
Colored filtersI.1160
Available in colors 00, 05, 06, 09
VisorI.5942
Available in color 15
Single barn doorI.5939
Available in color 02
Circular louver I.5954
Available in color 02
Protection gridI.5945
Available in color 11
Ground anchoring flange I.5951
Available in color 15
Accessory retention cable I.5949
Projector complete with mounting bracketI.5667-120 250W T14.5 E39 Mogul SSI.5667-277 250W T14.5 E39 Mogul SSI.5668-120 250W T14.5 E39 Mogul SI.5668-277 250W T14.5 E39 Mogul SI.5669-120 250W BT28 E39 Mogul FI.5669-277 250W BT28 E39 Mogul FI.5671-120 400W T14.5 E39 Mogul SSI.5671-277 400W T14.5 E39 Mogul SSI.5673-120 400W T14.5 E39 Mogul MI.5673-277 400W T14.5 E39 Mogul MI.5674-120 400W BT28 E39 Mogul FI.5674-277 400W BT28 E39 Mogul F
code lamp
accessories
code code
15
53
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaMaxiWoody arms
Arm for wall mountingI.5984
for I.5675, I.5676, I.5677, I.5685I.5994
for I.5680, I.5681, I.5682, I.5683
Wallmounted arms are the ideal solution when the use of poles doesn’t respond to design and safety issues.
Pole arms installation guarantees proper illumination of walkways with the adjustable angle of the projector.
2’-3”
Arm for pole mountingpole ø 3-1/8” to 4-3/4”I.5983
for I.5675, I.5676, I.5677, I.5685
2’-5”
2’-6”
Pole not included.
15
54
The major characteristic of the MaxiWoody system is its adaptability for use in a wide range of lighting projects for urban areas and open spaces. The FrameWoody system was created for lighting horizontal surfaces with different photometric distribution requirements. The system offers infinite possibilities of movement of the fixtures on various axes. The angle set mechanism is designed to ensure maximum versatility in the lighting project.
FrameWoody pendant page 65
FrameWoody page 62
Pole not included.
54
MaxiWoody Systemdesign: Mario Cucinella
MultiWoody page 68
Public spaces increasingly demand useful lighting to satisfy the technical require-ments of lighting without disturbing the visual, perceptive and design value of spaces and architecture. The MultiWoody system was created to produce light effects on vertical surfaces. Exploiting the flexibility of optics and accessories, the multiple MaxiWoody assembly makes it possible to express the lighting of architecture in its own language, defining the various elements, profiles in the most appropriate terms.
Pole not included.
55
56
design: Mario CucinellaFrameWoody
FrameWoody enables projectors to be pointed towards horizontal surfaces, with the possibility to move the projectors on both the horizontal and vertical axes. The use of MaxiWoody fittings with the appropriate optics and accessories makes it possible to have diversi-fied and accurate photometric distributions. The possibility of using simultaneously a range of optics and multiple light sources on one structure allows the lighting profesionnal to meet any challenge presented by the lighting project: from luminous distribution to chromatic yield, with mixing of various color temperatures. The FrameWoody system has various applications. It can be mounted on short poles to light up pedestrian areas and quiet roads, or on large poles to enhance elements of significant architectural impact such as avenues and squares. FrameWoody was designed to house a wide range of light sources combined with one another. One or several projectors can be oriented upward.
Maximum rotation of projectors within supports. Figures A & B refer to rotations on linear supports. Figure C refers to rotations of the square support.
57
design: Mario CucinellaFrameWoody
design: Mario CucinellaFrameWoody
Pole not included.
58
FrameWoody can be mounted with a combination of projectors and arms to respond to your lighting needs.
59
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaFrameWoody
Multiple head brackets allow a unique solution to illuminate outdoor areas where the use of poles doesn’t respond to design and safety issues.
How to order
To obtain the desired FrameWoody system, the order must take into account the various elements of the system: structure and projector.
Pole not included.
60
design: Mario CucinellaFrameWoody
Montreal Canadiens Hockey Centennial PlazaMontrealLemay & Ass. Architects
61
FrameWoodydesign: Mario Cucinella
FrameWoody is a system of linear and square structures, which can also be combined together, designed to support the various MaxiWoody projectors for lighting horizontal outdoor surfaces. The structure has a frame in galvanized steel with a powder paint finish. The square frame uses projectors complete with bracket, while the linear one uses projectors without bracket. The frame is secured to the pole by means of a pole bracket and is angled at 15° with respect to the horizontal axis. It is supported at the top by two stainless steel rods which are secured to the pole by means of a pole bracket.
FrameWoody is specially designed for MaxiWoody (small and medium body) and offers various possibilities for maxi-mum use of luminous distribution from the projectors, which are also designed to accommodate a high performance roads optic with a 150W metal halide lamp T6, RX7s. Every internal acces-sories of Maxiwoody and every light sources can be used. In addition to pole mounted fittings, there is also a wide range of wall mounted FrameWoody versions.
This fixture is rated IP67.
UL Listed “Suitable for wet location”
23’
Pole not included.
62
Photometric files are available at: www.iguzzini-na.com/downloads
sm
all v
ers
ion
med
ium
vers
ion
70W T6 G12 SS
projector code code lamp optic
I.5650 I.5675
70W E17 E26
70W E17 E26 M
SS
I.5652 I.5677
70W T6 G12 MI.5651 I.5676
70W T6 RX7s STI.5684 I.5685
150W T6 G12 SSI.5658 I.5680
150W E17 E26
150W E17 E26 M
S
I.5660 I.5682
150W T6 G12 MI.5659 I.5681
150W T6 RX7s STI.5666 I.5683
14”
12-1
/2”
ø12-3/8”
12-1
/2”
ø12-3/8”
16-7/8”
13-7
/8”
ø15”
13-7
/8”
ø15”
All combinations illustrated can be obtained by selecting from the number of elements presented in the tables.
sm
all v
ers
ion
- w
all
mo
un
tin
gm
ed
ium
vers
ion
- w
all m
ou
nti
ng
structure code
I.5965
I.5966
I.5968
I.5978
I.5979
I.5980
structure
sm
all
vers
ion
- p
ole
med
ium
vers
ion
- p
ole
code structure code
I.5955
I.5956
I.5957
I.5958
I.5969
I.5970
I.5971
I.5972 I.5977
I.5976
I.5975
I.5974
I.5973
I.5964
I.5963
I.5961
I.5960
I.5959
Codes and illustrations with a gray background refer to projectors without mounting bracket and can only be used with linear structures. Projectors are shown on pages 50-51.
23’-0”
29’-6”
5’-0”
5’-9”
Small:
Medium:
3’-9”
4’-3”3’-9”
4’-3”
7’-5”
9’-3”
10’-3”
11’-10”3’
-0”
3’-6
”
Pole not included.
15
63
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaFrameWoody
Small:
Medium:
5’-2”
6’-0”
9’-0”
10’-0”
7’-6”
8’-5”
7’-6”
8’-5”
6’-6”
6’-9”
3’-6”
4’-0”
3’-0
” 3’
-6”
Accessory codes are shown on pages 50-51.
Single barn door
Visor Circular louver
Linear spread lens
Accessory retention cable
Colored filters
The suspended system is made up of linear and square frame, used to support multiple Maxi-Woody projectors, to illuminate outdoor horizontal and vertical surfaces. Its structure is made of galvanized steel support treated with powder paint finish. The square shape uses the projectors complete with bracket, while the linear shape uses projectors with no bracket. The FrameWoody system is suspended with four stainless-steel cables – the diameter is 1/8” and the length is 13 ft. (adjustable). FrameWoody was specially designed to use
MaxiWoody fittings (small and medium-sized bodies). The system can be adjusted in order to fully exploit the luminous distributions made available by these projectors. Any of the MaxiWoody optics can be used to provide the optimum performance for any application. All internal accessories and light sources of the MaxiWoody projector can be used.
This fixture is rated IP67. UL Listed “Suitable for wet location”
design: Mario CucinellaFrameWoody pendant
64
65
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaFrameWoody pendant
The system has various applications. It can illuminate pedestrian areas, pathways and highlight objects with a strong architectural value such as large indoor places, commercial and preservation spaces.
sm
all v
ers
ion
larg
e v
ers
ion
structure Single barn door
Circular louver Colored filters
Linear spread lens
Accessoryretention cable
code
I.B039
I.B038
I.B037
I.B042
I.B041
I.B040
14”
ø12-3/8”
12-1
/2”
ø12-3/8”
16-7/8”
13-7
/8”
ø15”
13-7
/8”
ø15”
Codes and illustrations with a gray background refer to projectors without mounting bracket and can only be used for linear structures. Projectors are shown on pages 50-51.
The units come complete with suspension cables
Accessory codes are shown on pages 50-51.
sm
all
vers
ion
med
ium
vers
ion
70W T6 G12 SS
projector code code lamp optic
I.5650 I.5675
70W E17 E26
70W E17 E26 M
SS
I.5652 I.5677
70W T6 G12 MI.5651 I.5676
70W T6 RX7s STI.5684 I.5685
150W T6 G12 SSI.5658 I.5680
150W E17 E26
150W E17 E26 M
S
I.5660 I.5682
150W T6 G12 MI.5659 I.5681
150W T6 RX7s STI.5666 I.5683
36-1
/2”
36-1/4”
8-5/
8”8-
5/8”
36-1/4”
9-1/
2”
5’-3-3/8”
9-1/
2”
3’-6-1/2”
3’-6-1/2”
3’-6
-3/4
”
4’-6”
12-1
/2”
15
66
design: Mario CucinellaMultiWoody
The MultiWoody system was designed for the application of MaxiWoody as an instrument dedicated specifically to architec-ture. The grouping of projectors on a single pole makes it possible to highlight details while also lighting facades, with great ver-satility and operational precision. The grouping of projectors on the wall mounting support is a further expression of the multifunctional nature of the system.
The application of the Multi-Woody system evolves from a concept of useful lighting: light must be used with precision in order to enhance architecture and design not to flatten and subdue spaces through indiscriminate, unselective lighting.
The combination of rotations defined by the graduated scale, enables the lighting professional to solve any challenge posed by outdoor lighting projects on vertical surfaces.
Pole bracket for individual projector
Pole bracket for double projector
Wall support for two projectors
Wall support for three projectors
Pole not included.
Light pollution
The combination of several Maxi-Woody projectors on one pole, with the appropriate optics and accesso-ries, favors diversified, precise light distribution, avoiding dispersal and glare to provide balanced lighting without light pollution.
67
design: Mario CucinellaMultiWoody
Vertical architectural
element (obelisks,
statues, etc.).
Optic superspot, spot and longitudinal linear.
Perception of the volume
of buildings’ façades.
Elliptical optic for illumination of the façade, medium optic for the walkway.
Spot optic for architectural elements, longitudinal linear optic for the walkway, medium optic for general lighting.
longitudinal linear
elliptical optic
spotoptic
elliptical optic
68
All combinations illustrated below are purely indica-tive; the maximum number of projectors depends on the conditions of the installation point and should be verified as the need arises.
Projectors are shown on pages 50-51.
Accessory codes are shown on pages 50-51 .
sm
all v
ers
ion
med
ium
vers
ion
70W T6 G12
70W T6 G12 M
SS
projector code lamp optic
I.5650
70W E17 E26 M
I.5652
70W E17 E26 SS
I.5651
70W T6 RX7s ST
150W T6 G12 SS
I.5684
150W E17 E26
150W E17 E26 M
S
I.5660
I.5658
150W T6 G12 MI.5659
12-1
/2”
ø12-3/8”14”
13-7
/8”
ø15”
16-7/8”
Single barn door
Visor Circular louver
Linear spread lens
Accessoryretention cable
Colored filters
29’-0”
23’-0”
16’-0”
Pole not included.
69
Photometric files are available at: www.iguzzini-na.com/downloads
Multiple support for two projectors
Multiple support for three projectors
Pole bracket fordouble projector
code
I.6012
code
I.6013
code
I.6014
code
I.6015
9”
5-7/
8”37
-3/4
”
9”
5-7/
8”
6-1/8”
7”
5-7/8”
7”
61-3
/8”
Branch box for multiple wiring fitted
on pole
code
I.1880
MultiWoody design: Mario Cucinella
Pole bracket forindividual projector
15
70
design: Luigi MassoniEllipse ceiling/wall
Ellipse is a surface mounted fixture for wall and ceiling applications. Fixtures are available in incandescent or compact fluorescent versions. The fixture is very efficient due to the special design of the glass lens. The high diffusing glass lens is mounted within a die cast aluminum frame that is attached to the injection molded polycarbonate housing. The use of polycarbonate ensures that the housing will not corrode. All hardware is AISI 304 stainless steel and the frame is die cast of copper free aluminum and receives a dual chromium phosphate plating treatment followed by the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance. The fixture is mounted to the surface utilizing anchor screws that are independent from the electrical junction box to ensure a rigid attachment.
This product was awarded the IF Design Award in 1999
This fixture is rated IP53 degree of protection (ceiling installation). IP54 degree of protection (wall installation). UL Listed “Suitable for Wet Location”
71
Photometric files are available at: www.iguzzini-na.com/downloads
01
Ellipse ceiling/walldesign: Luigi Massoni
The Ellipse fixtures ensure efficiency and safety due to the high level of protection against the entry of insects and moisture. The use of energy saving lamps and the special shape make this an ideal fixture for use in residential or commercial projects.
Ellipse Ceiling/wallI.7113 60W A19 Med. BaseI.7116 60W A19 Med. BaseI.7117-120 18W T4 Quad G24q-2I.7117-277 18W T4 Quad G24q-2I.7119-120 26W T4 Quad G24q-3I.7119-277 26W T4 Quad G24q-3
With integral electronic ballast for the fluorescent versions.
4-1/
8"5-
7/8"
8-7/8"
1502
code lamp
72
Semi-recessed application wall/ceiling
Wall-mounting/ Ceiling application
Micro-prismatic glass
Efficiency and uniform lighting
73
design: Mario CucinellaVis
The attention to details characterized by this new family of fixtures allows the use of round or square designs to blend with the architecture. The experience of moving through landscapes and searching for entrances, stairways, walkways and lobbies, can be enhanced by the use of well designed fixtures. The comfort of this fixture serie is enhanced by the use of a transparent glass lens that has been specially coated on the inside for the bulb to remain unseen. This gives VIS a very modern and rich appearance. All fluorescent and metal halide fixtures are
supplied with electronic ballasts. The use of polycarbonate in the housing ensures that it will not corrode. All hardware is AISI 304 stainless steel and the frame is die cast of copper free aluminum and receives a chromium phosphate plating treatment followed by the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance. The fixture is mounted to the surface utilizing anchor screws that are independent from the electrical junction box to ensure a rigid attachment.
74
Photometric files are available at: www.iguzzini-na.com/downloads
design: Mario CucinellaVis
-descent and fluorescent lamps.
semi-recessed mounted.
fixture body.
patterned interior painted surface.
receive chromium phosphate plating treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
stainless steel.
This fixture rated IP66 UL Listed “Suitable for Wet Location”
E
N E R G
Y
S
AV I N
G
Electronic power supply
Feedthrough cabling
Energy saving
75
Photometric files are available at: www.iguzzini-na.com/downloads
01
design: Mario CucinellaVis round small
Wall/ceiling-mounted luminairesI.B695-120 26W T4 Triple GX24q-3I.B695-277 26W T4 Triple GX24q-3I.B696 60W A19 Med. Base
With integral electronic ballast for the fluorescent version.
Ceiling/wall semi-recessed luminaireI.B697-120 26W Triple GX24q-3I.B697-277 26W Triple GX24q-3I.B698 60W A19 Med. Base
With integral electronic ballast for the fluorescent version.
4-3/8”
ø 10
-7/8
”
ø 9-
3/8”
1-7/8” 2-7/8”
ø 10
-7/8
”
Recessed circular styrofoamI.0044
for I.B697, I.B698
1-7/8”
ø 9-
3/8”
1502
accessories
code
code lamp
76
Photometric files are available at: www.iguzzini-na.com/downloads
01
Vis round largedesign: Mario Cucinella
Wall/ceiling-mounted luminairesI.B699-26-120 26W Triple GX24q-3I.B699-26-277 26W Triple GX24q-3
I.B699-32-120 32W Triple GX24q-3I.B699-32-277 32W Triple GX24q-3
I.B700-120 2x26W Triple GX24q-3I.B700-277 2x26W Triple GX24q-3
I.B701 75W A19 Med. Base
I.B702-120 20W CMH T4.5 G8.5I.B702-277 20W CMH T4.5 G8.5
With integral electronic ballast.
4-7/8”
ø 14
”
Ceiling/wall semi-recessed luminaireI.B703-26-120 26W Triple GX24q-3I.B703-26-277 26W Triple GX24q-3
I.B703-32-120 32W Triple GX24q-3I.B703-32-277 32W Triple GX24q-3
I.B704-120 2x26W Triple GX24q-3I.B704-277 2x26W Triple GX24q-3
I.B705 75W A19 Med. Base
I.B709-120 20W CMH T4.5 G8.5I.B709-277 20W CMH T4.5 G8.5
With integral electronic ballast.
2“ 2-7/8”
ø 14
”
ø 12
-1/2
”
Recessed circular styrofoamI.0043
for I.B703, I.B704, I.B705, I.B709
2“
ø 12
-1/2
”
1502
code lamp
accessories
code
77
Photometric files are available at: www.iguzzini-na.com/downloads
01
Vis squaredesign: Mario Cucinella
Wall/ceiling-mounted luminairesI.B706-26-120 26W Triple GX24q-3I.B706-26-277 26W Triple GX24q-3
I.B706-32-120 32W Triple GX24q-3I.B706-32-277 32W Triple GX24q-3
I.B707 60W A19 Med. Base
I.B711-120 20W CMH T4.5 G8.5I.B711-277 20W CMH T4.5 G8.5
With integral electronic ballast.
4-1/2”
11-7
/8”
Ceiling/wall semi-recessed luminaireI.B708-26-120 26W Triple GX24q-3I.B708-26-277 26W Triple GX24q-3
I.B708-32-120 32W Triple GX24q-3I.B708-32-277 32W Triple GX24q-3
I.B710 60W A19 Med. Base I.B712-120 20W CMH T4.5 G8.5I.B712-277 20W CMH T4.5 G8.5
With integral electronic ballast.
11-7
/8”
11”
2“ 2-9/16”
Recessed square styrofoamI.0045
for I.B708, I.B710, I.B712
2“
11”
1502
code lamp
accessories
code
78
design: Mario CucinellaFull square – Grid square
and fluorescent lamps.
mounted.
-bonate diffuser
phosphate plating treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
anchor screws that are independent from the electrical junction box to ensure a rigid attachment.
This fixture is rated IP66. UL Listed “Suitable for Wet Location”
Anti-vandalism screen
E
N E R G
Y
S
AV I N
G
Energy saving
79
Photometric files are available at: www.iguzzini-na.com/downloads
01
design: Mario CucinellaFull square – Grid square
Full Square surface fixture Wall/CeilingI.7211-120 2x18W T4 Quad G24q-2 I.7211-277 2x18W T4 Quad G24q-2
With integral electronic ballast.
Full Square semi-recessed mounting I.7212-120 2x18W T4 Quad G24q-2 I.7212-277 2x18W T4 Quad G24q-2
With integral electronic ballast.
Grid Square surface fixture Wall/CeilingI.7213-120 2x18W T4 Quad G24q-2I.7213-277 2x18W T4 Quad G24q-2
With integral electronic ballast.
Grid Square semi-recessed mounting I.7214-120 2x18W T4 Quad G24q-2 I.7214-277 2x18W T4 Quad G24q-2
With integral electronic ballast.
11-3
/4"
11-3/4" 4-1/4"
11-3
/4"
11-3/4" 4-1/2"
11-3
/4"
11-3/4" 2"
11"
2-1/4"
11-3
/4"
11-3/4" 2"
11"
2-1/2"
Recess square styrofoamI.0045
for I.7212, I.7214
code lamp
installation systems
code
1502
80
design: Mario CucinellaComfort
fluorescent lamps.
recessed mounted.
normal viewing angles for comfort.
-ate fixture body for corrosion resistance.
or square with tempered glass lens.
chromium phosphate plating treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
steel.
surface utilizing anchor screws that are independant from the electrical junction box to ensure a rigid attachment.
ballast.
This fixture is rated IP66 UL Listed “Suitable for Wet Location”
E
N E R G
Y
S
AV I N
G
Energy saving Visual comfort Dispersion of the light flow < 3%
81
design: Mario Cucinella
Photometric files are available at: www.iguzzini-na.com/downloads
02
Comfort
15
Comfort round surface mountingI.7063-120 26W T4 Quad G24q-3I.7063-277 26W T4 Quad G24q-3I.7095-120 13W T4 Quad G24q-1I.7095-277 13W T4 Quad G24q-1
With integral electronic ballast.
Comfort round semi-recessed mountingI.7077-120 26W T4 Quad G24q-3I.7077-277 26W T4 Quad G24q-3I.7125-120 13W T4 Quad G24q-1I.7125-277 13W T4 Quad G24q-1
With integral electronic ballast.
Comfort square surface mountingI.7127-120 26W T4 Quad G24q-3I.7127-277 26W T4 Quad G24q-3
With integral electronic ballast.
Comfort square semi-recessed mountingI.7129-120 26W T4 Quad G24q-3 26W T4 Quad G24q-3
With integral electronic ballast.
10-3/4"
14"
3-7/8"
4-1/8"
11-3/4" 3-3/4"
9-1/
2"12
-1/2
"
10-3/4"
2-1/4"
2-1/4"
1-7/8"
1-7/8"14"
2"11-3/4"
11"
1-3/4"
12-1
/2"
1-7/8"
9-1/
2"
1-7/8"
I.0043 I.0044 Recessed square styrofoam I.0045
for I.7129
Recessed round styrofoamI.0043
for I.7077, I.7063I.0044
for I.7125, I.7095
2"
11"
0045
I.7063
I.7095
I.7077
I.7125
code lamp
installation systems
code code
82
83
design: YamadaKriss
special lighting effects using metal halide or halogen lamps. The ability to use light as an art form is often advantageous in highlighting architectural features. The dramatic sliver of light can draw attention to the building surfaces.
available in 2 sizes.
free aluminum and receives a dual chromium phosphate plating treatment followed by passive heat treatment at 248°C prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corro-sion resistance.
gasket prevents the penetration of moisture and insects.
-tion cable is supplied to aid in the re-lamping process.
steel.
include a focused narrow beam using a bi-convex tempered glass lens and a softer wide beam for general up or downward lighting.
This fixture is rated IP44 UL Listed “Suitable for Wet Location”
84
Photometric files are available at: www.iguzzini-na.com/downloads
01
Krissdesign: Yamada
1502
I.5635 150W T3 RSC
I.5689-120 70W T6 G12I.5689-277 70W T6 G12
With integral electronic ballast.
I.5636 150W T3 RSC
I.5690-120 70W T6 G12I.5690-277 70W T6 G12
With integral electronic ballast.
I.5634 150W T3 RSC
I.5688-120 70W T6 G12I.5688-277 70W T6 G12
With integral electronic ballast.
7-5/
8"5-
7/8"
8-1/8"
7-5/
8"5-
7/8"
11"
7-5/
8"5-
7/8"
11"
7-5/
8"5-
7/8"
8-1/8"
6-5/
8"5-
7/8"
8-1/8"
6-5/
8"5-
7/8"
11"
46º
88º
code lamp
85
Photometric files are available at: www.iguzzini-na.com/downloads
01
Krissdesign: Yamada
1502
I.5632 150W T3 RSC
I.5686-120 70W T6 G12I.5686-277 70W T6 G12
With integral electronic ballast.
I.5633 150W T3 RSC
I.5687-120 70W T6 G12I.5687-277 70W T6 G12
With integral electronic ballast.7-
5/8"
5-7/
8"
8-1/8"
7-5/
8"5-
7/8"
11"
6-5/
8"5-
7/8"
8-1/8"
6-5/
8"5-
7/8"
11"
84º
46º
84º
code lamp
86
design: YamadaFlash
instrument. The combined use of a heavy duty die cast housing and a molded optical glass lens delivers a product that will allow dramatic lighting effects while providing a maintenance free installation.
spike for installation in landscaping and is provided with a 7’-0” cord for connection to a waterproof junction box.
ensures against the penetration of moisture and insects.
steel.
This fixture is rated IP55 UL Listed “Suitable for Wet Location”
Adjustable product
Mechanical locking mechanism for precision aiming
87
Photometric files are available at: www.iguzzini-na.com/downloads
02
Flashdesign: Yamada
Flash Floodlight with lens-based optical systemI.7206 150W T3 RSC
Completed with supply cableL = 7 ft.
Flash Floodlight for general illuminationI.7207 150W T3 RSC
Completed with supply cableL = 7 ft.
20 ft
16 ft
9 ft
39 ft
32 ft
22 ft22
"
13"
6-1/8"
22"
13"
6-1/8"
90º
15
code lamp
88
design: Piero CastiglioniRadius
1
The possibility of installing the fitting as surface mounted, semi-recessed, on window cornice, on the ground or on the wall provides a wide range of applications for the fixture.
1 Semi-recessed application
2 Free standing application
3 Double application
4 Ground installation
5 Window application
89
Radiusdesign: Piero Castiglioni
The grid covering the glass provides protection against vandalism.
The Radius lens assembly enables the light flow to be focused into a blade of light which is especially useful for highlighting architectural details.
The Radius optic is designed specifically to optimise the luminous effect of the beam of light.
6 ft 12 ft 18 ft 24 ft
90
Photometric files are available at: www.iguzzini-na.com/downloads
design: Piero CastiglioniRadius
a narrow vertical and wide hori-zontal beam of light through the use of a reflector and a specially designed optical lens. This distri-bution is useful for wall wash or surface illumination from very low mounting heights.
semi-recessed in a wall or on the ground for plaza lighting, or wall mounted on end for wall washing applications.
free aluminum and receives a dual chromium phosphate plating treatment followed by passive heat treatment at 120°C prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
will provide a high degree of vandal resistance.
gasket prevents the penetration of moisture and insects.
with integral electronic ballast.
steel.
This fixture is rated IP55. UL Listed “Suitable for Wet Location”
Shaft of Light optic
Protection grid
91
Photometric files are available at: www.iguzzini-na.com/downloads
02
design: Piero CastiglioniRadius
Radius FloodlightI.7365 150W T3 RSC
I.7366-120 70W T6 R7s RSCI.7366-277 70W T6 R7s RSC
With integral electronic ballast.
Radius Floodlight with protective guardI.7367 150W T3 RSC
I.7368-120 70W T6 R7s RSCI.7368-277 70W T6 R7s RSC
With integral electronic ballast.
Ground fixing plate I.1079
for I.7365, I.7366, I.7367, I.7368
Available in colors 02-15
Wall fixing plateI.1080
for I.7365, I.7366, I.7367, I.7368
Available in colors 02-15
Recessed square styrofoamI.0233 for I.7365, I.7366, I.7367, I.7368
10”
5-1/
8”3-
1/2”
10”
10-11/16"
10-1
/16"
3-1/
2"
2"
10-11/16"
10-1
/16"
3-1/
2"
2"
10-1/4” x 9-5/8”
10-1
/4”
x 9-
5/8”
2”
code lamp
installation systems
code
15
92
Photometric files are available at: www.iguzzini-na.com/downloads
design: Piero CastiglioniEdge
which incorporates a patented optical system which will provide a narrow optical distribution in the vertical plane while providing a 120° distribution in the horizontal. Utilizing AR111, CDM-R111 and LED source in concert with the lens is a very creative solution to many lighting needs.
mounting plates provide many installation possibilities.
copper free aluminum and receives a dual chromium phosphate plating treatment followed by passive heat treat-ment at 120°C prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
gasket prevents the penetration of moisture and insects.
internal electronic components.
stainless steel.
of weatherproof cord for attachment to power.
This fixture is rated IP55. UL Listed “Suitable for Wet Location”
Prismatic lens Protection grid
93
Photometric files are available at: www.iguzzini-na.com/downloads
design: Piero Castiglioni Edge
EdgeI.7290-120 2x50W AR111 G53I.7290-277 2x50W AR111 G53
I.7291-120 2x35W CDM-R111 GX8.5I.7291-277 2x35W CDM-R111 GX8.5
I.7295
LED included
I.7296
LED included
With integral electronic transformer, electronic ballast or LED power supply.
11-1/4”
6-1/
4”
10-7/8”
15”
11-7/8”
6-1/
4”
6-1/
8”5-
1/2”
11-1
/2”
5-1/
8”
Ground fixing plate I.1029
Manufactured from galvanised steel
Wall/pavement fixing plateI.1028
Manufactured from galvanised steel
McCord Museum, Montreal – Lighting designer: Éclairage public
code lamp
installation systems
code
1502
94
TEE is an outdoor luminaire designed as a “luminous mark” to characterize different environments. It is small and unobtrusive in the land-
scape at night and its stylish design is especially attractive during daytime hours. Multiple mounting methods makes it a very versatile fixture.
95
for use with halogen or LED sources.
integral power supply.
base mounted, or spike mounted in plantings.
aluminum for structure.
stabilized polycarbonate diffuser
chromium phosphate plating treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
steel.
mounted to the surface utilizing anchor screws that are indepen-dent from the electrical junction box to ensure a rigid attachment.
This fixture is rated IP55. UL Listed “Suitable for Wet Location”
Screen for “eclipse” effect
Colored filters Grooved diffuser Easy maintenance
design: YamadaTee
96
Photometric files are available at: www.iguzzini-na.com/downloads
design: YamadaTee
Tee for low wallsI.7596 25W Halopin G9I.BB61
I.B869
I.B870 3x1W LED blue 120V
LED version with integral electronic power supply
Tee for wallsI.7596 + I.5931 25W Halopin G9I.BB61 + I.5931
I.B869 + I.5931
I.B870 + I.5931 3x1W LED blue 120V
LED version with integral electronic power supply
Tee for floor applicationI.7598 25W Halopin G9I.BB63
I.B881
I.B882 3x1W LED blue 120V
LED version with integral electronic power supply
4-5/8"
2-3/8"
7-1/
8"
4-5/8"
2-3/8"
7-1/
8"
4-5/8"
23-5
/8"
4-7/8"
1502
code lamp
1
2
3
4
1 Wall 2 Low wall 3 Floor 4 Peg
97
Photometric files are available at: www.iguzzini-na.com/downloads
Teedesign: Yamada
Colored filtersI.1194
for I.7596, I.7597, I.7598, I.7599
Available in colors 05-06-09
Fastening system h=6-5/8” I.5933
for I.7598
Screen I.5932
Available in colors 02-15
Tee on stickI.7597 25W Halopin G9I.BB62
I.B875
I.B876 3x1W LED blue 120V
LED version with integral electronic power supply
Tee on stickI.7599 25W Halopin G9I.BB64
I.B887
I.B888 3x1W LED blue 120V
LED version with integral electronic power supply
2-3/8"
4-5/8"
7-1/
8"14
-3/8
"
2-3/8"
14-3
/8"
4-5/8"
23-5
/8"
1502
code lamp
accessories
code code
Circular plate for wall application I.5931
for I.7596, I.BB61, I.BB69, I.BB70
98
Temperature <104°F
Prismatic diffuserEffect lighting
99
design: Piero CastiglioniGlim Cube
Glim Cube can showcase and decorate spaces with vertical and horizontal strips of light utilizing LED technology. These small cubes of light designed by Piero Castiglioni minimize and balance the landscape. Wandering through the space becomes a positive experience. Landscape and details are illuminated with harmonious precision. With Glim
Cube the great outdoors becomes scenery, acquiring significance and added value. Single and multiple modules can be joined together so there are many different installations possibilities. The small pathway fixture is only 14-1/2” tall. This allows for a flexible and very modern lighting system.
100
Glim Cubedesign: Piero Castiglioni
Glim Cube can be installed as a border. The low level of light can greatly enhance the landscape by providing a glare free and softly illuminated environment. At only 1 watt per unit this becomes a very efficient installation.
In-series distance connection layout
The electrical supply to these fixtures is constant current requiring for multiple fixtures to be wired in series. As shown in details, the use of 350mA or 700mA power supplies is appropriate. Careful consideration to the connected load must be used to determine the proper power supply device. For systems requiring higher wattage supply, please contact the factory
The acrylic cube is specially designed to provide many differ-ent light distributions. The Glim Cube can become a highly versatile and efficient lighting system
350mA
120V
Power supplyfor 44004401
350m
A
700mA
120V
Power supplyfor 4402
350m
A
350m
A
LuminairePower supply
4400 (3W) 4401 (12W) 4402 (17W)
code
I.B603-I.B605-I.B607-
I.B615-I.B617-I.BB06-
I.BB07-I.BB08-I.BB09-
I.BB10-I.BB11-I.BB18-
I.BB19.I-BB20-I.BB21
I.B609-I.B611-I.BB12-
I.BB13-I.BB14-I.BB15
I.B597-I.B601-I.BA97-
I.BA98-I.BB02-I.BB03
lamp
1W
2x1W 18 AWG 95’ 108’ 54’
3x1W
3
1
1
8
5
3
11
5
3
AWG
n. max L (Ft) n. L (Ft) n. L (Ft)
Elliptic (E) Effect Light Sliver (L) Effect
Elliptic (E) Effect
Flood (F) Effect
Flood (F) Effect
Spot (S) Effect
Flood/Flood (FF) Effect
Spot/Spot (SS) Effect
101
design: Piero CastiglioniGlim Cube
lighting pathways and may be wall mounted for hallways and corridors.
with a fixed base for mounting on a concrete base or with a spike for garden mounting. The shaft is AISI 304 stainless steel with a special textured passivation treatment.
cube with the LED imbedded in a specially designed optical chamber. This produces a series of beams which can be applied with high efficiency.
is die cast of copper free aluminum and receives a dual chromium phosphate plating treatment followed by passive heat treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
This fixture is rated IP66. UL Listed “Suitable for Wet Location”
Energy saving Easy maintenance
(lamps have longer life)
Stainless steel rod and screws
Thermoplastic spike with anticorrosion treatment. Double cable gland.
102
Photometric files are available at: www.iguzzini-na.com/downloads
Glim Cubedesign: Piero Castiglioni
Glim Cube Stake with integral power supplyI.BB16
I.BB17
I.B613 1W blue LED 120V
Glim Cube Stake without power supplyI.BB18
I.BB19
I.B615 1W blue LED 350mA
Use suitable remote power supply.
Glim Cube Stake with baseI.BB20
I.BB21
I.B617 1W blue LED 350mA
Use suitable remote power supply.
2-1/
4”26
-1/2
”
4-3/8”
2-3/
8”14
-1/2
”3-1/2”
13
code lamp
103
Photometric files are available at: www.iguzzini-na.com/downloads
Glim Cubedesign: Piero Castiglioni
Applique CoveI.BA97
I.BA98
I.B597 3x1W blue LED 350mA
Use suitable remote power supply.
Rectangular wall-mountedI.BB02
I.BB03
I.B601 3x1W blue LED 350mA
Use suitable remote power supply.
2-5/
8”
1-7/8” 6-7/8”
6-7/8”1-5/8”
15
code lamp
104
Photometric files are available at: www.iguzzini-na.com/downloads
Glim Cubedesign: Piero Castiglioni
Single wall-mountedI.BB06
I.BB07
I.B603 1W blue LED 350mA
Use suitable remote power supply.
Single wall-mounted up light or down lightI.BB08
I.BB09
I.B605 1W blue LED 350mA SI.BB10
I.BB11
I.B607 1W blue LED 350mA F
Use suitable remote power supply.
Double wall-mounted up/down lightI.BB12
I.BB13
I.B609 2x1W blue LED 350mA S/SI.BB14
I.BB15
I.B611 2x1W blue LED 350mA F/F
Use suitable remote power supply.
2-1/4”
2-1/
4”
1-5/8”
2-1/4”
2-1/
4”
2”
2-1/4”
3-1/
2”
2”
Electronic power supply 3W4400 3W, 350mA IN: 120V AC @ 350mADimensions: 1-5/8” x 1-5/8” x 7/8”
Electronic power supply 12W4401 12W, 350mA IN: 120V AC @ 350mADimension: 5-3/16” x 1-3/8” x 7/8”
Electronic power supply 17W4402 17W, 700mA IN:120V AC @ 700mADimension: 5-3/16” x 1-31/8” x 7/8”
Watertight connector kitI.9581
Available in color 02
Connector block without power supplyI.B915
Available in color 02
code lamp
components
code code
15
Consult factory for higher wattage power supplies and for wiring diagrams.
105
Glim Cubedesign: Piero Castiglioni
Capri HotelItaly
106
The use of transparent structural glass and contemporary design unveiled the Euclid. The innovative optics with uniform distribution and high visual comfort takes advantage of indirect lighting in a totally unique exterior application. The soft internal illumination of the structural glass panels combined with the highly efficient reflector design creates beautifully lit pathways.
Multimirror innovative optic. Visual comfort.
Temperature <149°F
Euclidedesign: Mario Antonio Arnaboldi & Partners
107
108
Euclidedesign: Mario AntonioArnaboldi & Partners
or halogen lamps.
of highly reflectorized semi- transparent polycarbonate.
underground compartment within a shielded reflector system designed to eliminate glare. The reflector is also designed to concentrate the beam of light on the upper reflector modules and create an asymmetric lighting pattern for walkways and plazas.
of copper free aluminum and is completely sealed against dust and moisture through the use of silicone air tight gasketing.
special consideration to eliminate internal condensation and mildew.
chromium phosphate plating treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
with internal electronic compo-nents.
steel.
This fixture is rated IP67. UL Listed “Suitable for Wet Location”
Tempered safety glass
Multifocal reflector made of metal-lised transparent polycarbonate
Sodium calcium tempered safety glass
Anti-mildew and anti- condensation
Ground installation with aluminium external casing
Cement base for ground installation
Stainless steel rim
Aluminium alloy optical assembly
Aluminium alloy external casing
109
Photometric files are available at: www.iguzzini-na.com/downloads
Euclidedesign: Mario AntonioArnaboldi & Partners
7-5/8”
56-1
/2”
39-3
/8”
6-5/
8”
12-1/4”
CasingI.2927
Available in color 02
15-3/4”
11-5/8”
18-3
/4”
EuclideI.7201-120 20W CDM-Tm* PGJ5
I.7200-120 70W T6 G12I.7200-277 70W T6 G12
I.7202-120 90W T4 GY6.35 I.7202-277 90W T4 GY6.35
* new Mini Master Color (Philips) With integral electronic ballast.
code lamp
accessories
code
13
110
111
design: Yamada – Bruno GecchelinPathway
The perfect harmony between architec-tural design and illumination distinguish this series of pathway luminaires. These luminaires are truly “indicator lights” for delineating pathways. They fit harmoniously with their environment, enriching it without being invasive or standing out excessively. These pathway luminaires are designed for optical performance and for long life due to their use of materials that are resistant to the elements.
112
Blizdesign: Yamada
or LED sources.
conduit stub and anchor bolts.
components.
receives a dual chromium phosphate plating treatment followed by passive heat treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
vandal resistance.
This fixture is rated IP44. UL Listed “Suitable for Wet Location”
113
Photometric files are available at: www.iguzzini-na.com/downloads
design: YamadaBliz
BlizI.7288-120 26W T4 quad G24q-3I.7288-277 26W T4 quad G24q-3
I.7289-120 20W CMH T4.5 G8.5I.7289-277 20W CMH T4.5 G8.5
I.7289-L-00
I.7289-L-09 3x1W blue LED 120V
With integral electronic ballast or power supply.
11” 4“
20-1
/2”
code lamp
1502
114
design: YamadaArc
narrow and one wide. The combination of the two sizes offers a creative and interesting look.
conduit stub and anchor bolts.
organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
components.
This fixture is rated IP44. UL Listed “Suitable for Wet Location”
115
Photometric files are available at: www.iguzzini-na.com/downloads
Arcdesign: Yamada
1502
Arc NarrowI.7208-120 13W T4 quad G24q-1I.7208-277 13W T4 quad G24q-1
I.7208-L-00
I.7208-L-09 3x1W blue LED 120V
With integral electronic ballast or power supply.
Arc WideI.7209-120 26W T4 quad G24q-3I.7209-277 26W T4 quad G24q-3
I.7210-120 20W CMH T4.5 G8.5I.7210-277 20W CMH T4.5 G8.5
I.7210-L-00
I.7210-L-09 3x1W blue LED 120V
With integral electronic ballast or power supply.
4“
15-3
/4”
33-1/2”
16-1/8” 4“
15-3
/4”
code lamp
116
Sparkdesign: Yamada
completely shielded source lighting option.
at grade with the conduit stub and anchor bolts.
electronic electrical components.
free aluminum and receives a dual chromium phosphate plating treatment followed by passive heat treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
steel.
This fixture is rated IP45. UL Listed “Suitable for Wet Location”
117
Photometric files are available at: www.iguzzini-na.com/downloads
Sparkdesign: Yamada
1502
SparkI.7284-120 20W CMH T4.5 G8.5I.7284-277 20W CMH T4.5 G8.5
I.7285-120 18W T4 quad G24q-2I.7285-277 18W T4 quad G24q-2
With integral electronic ballast
15-3
/4"
5-7/8"
code lamp
118
119
design: J. M. Wilmotte iWay Pencil
Visual comfort Temperature < 167°F
This new serie of bollards were designed with today’s environments in mind. The need for visual comfort and energy efficient lighting fixtures has never been greater. The fixtures need to please the eye and be available in a wide range of lighting sources. The design of iWAY is innovative as it is available in both square and round with an elegant base on the bottom. This is accomplished without diminishing the structural integrity of the fixture. The use of continuous internal tie rods transfer the moment to the top of the bollard rather than to the base as is common with many other designs. PENCIL offers a continuous band of soft illumination with a completely flush lens and internally sealed optical chamber. The absence of visible screws defines PENCIL’s essential linear and clean style.
120
design: J. M. Wilmotte iWay Pencil
The iWAY system was designed with an innovative patented optical chamber. This ensures excellent pho-tometric distribution and very high visual comfort. This is a “Dark Sky” compliant bollard as there is virtually no upward component. The 360° distribu-tion designed by J. M. Wilmotte can be internally shielded to create various light patterns. Luminaires with internal louver assemblies or frosted diffusers for fluores-cent lamps are also available and will provide a Type 5 distribution. These provide softer illumination where the upward lighting component may be desirable.
PENCIL is available in either a round or rectangular cross section. The appearance is emphasized by the vertical cut of the diffusing screen. The use of internal louvers will diminish the upward com-ponent and increase visual comfort or concentrate the beam for a narrower distribu-tion. The fixtures are available with 1 or 2 sided openings allowing for many different applications. The PENCIL is an evolution of existing optical systems already applied to many architectural outdoor lighting designs.
360° Emission 180° Emission90°+90° Emission
180° Emission + light blade
* Obtainable by using the accessories
360° Emission
360° Emission
120° Emission120°+120° Emission
120° Emission120°+120° Emission
*120° Emission + light blade
*Light blades emission
180° Emission90°+90° Emission
180° Emission + light blade
* Obtainable by using the accessories
* Obtainable by using the accessories
121
iWay
use with metal halide, compact fluorescent and LED sources.
and square.
a lower section of extruded aluminum with a base made of copper free aluminum die cast and is secured to the concrete by means of (3) three anchor bolts. There are (3) three internal tie rods that continue upward to just below the optical compartment. This method ensures a rugged and highly vandal resistant instal-lation.
in an injection molded UV stabi-lized polycarbonate lens assem-bly which is fastened to the lower section with a die cast aluminum fastening ring. The patented ultra-pure aluminum reflector system is secured to the internal top cap and is multi sectional to provide exceptional photometric perfor-mance and simple maintenance.
-num and is secured to the lens assembly by means of a die cast bayonet closure system which is removable for relamping. The tamperproof hardware again ensures a high degree of vandal resistance.
are electronic and integral.
of all accessible parts shall not exceed 167°F.
receive chromium phosphate plating treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
steel.
This fixture is rated IP66. UL Listed “Suitable for Wet Location”
Anti-vandalism diffuser and structure
Resistant to vandals
Anti-corrosion No upward emission of light flow
design: J. M. Wilmotte
122
Photometric files are available at: www.iguzzini-na.com/downloads
design: J. M. Wilmotte iWay
iWay Large Round 24I.B463 22W CDM-Tm* PGJ5 120V
I.B462-120 35W T6 G12I.B462-277 35W T6 G12
With integral electronic ballast.* new Mini Master Color (Philips)
iWay Large Round 40I.B465-120 35W T6 G12 I.B465-277 35W T6 G12
I.B466-120 70W T6 G12I.B466-277 70W T6 G12
With integral electronic ballast.
6-5/8”
39 -3
/8”
6-5/8”
24”
Mounting plate with anchor boltsI.B513
Screen for asymmetrical 180° emissionI.B503
Available in color 02
Screen for 90°+ 90° emissionI.B505
Available in color 02
Screen for 180° emission + light bladeI.B507
Available in color 02
code lamp
accessories
code code
15
123
Photometric files are available at: www.iguzzini-na.com/downloads
design: J. M. Wilmotte iWay
iWay Small Round 24I.B468 22W CDM-Tm* PGJ5 120VI.B469 5W Led white 120VI.B471 5W Led blue 120V
* new Mini Master Color (Philips)With integral electronic ballast or power supply
iWay Small Round 40I.B472 22W CDM-Tm* PGJ5 120V
With integral electronic ballast* new Mini Master Color (Philips)
3-1/2”
39-3
/8”
3-1/2”
24”
Mounting plate with anchor boltsI.B514
Screen for asymmetrical 180° emissionI.B504
Available in color 02
Screen for 90°+ 90° emissionI.B506
Available in color 02
Screen for 180° emission + light bladeI.B508
Available in color 02
code lamp
accessories and components
code code
15
124
Photometric files are available at: www.iguzzini-na.com/downloads
iWaydesign: J. M. Wilmotte
15
6-5/8”
43-3
/4”
6-5/8”
28-3
/8”
Mounting plate with anchor boltsI.B513
iWay with Louvres 28I.B474-120 18W T4 quad G24q-2I.B474-277 18W T4 quad G24q-2
I.B473-26-120 26W T4 quad G24q-3I.B473-26-277 26W T4 quad G24q-3
I.B473-32-120 32W T4 triple GX24q-3I.B473-32-277 32W T4 triple GX24q-3
I.B473-42-120 42W T4 triple GX24q-4I.B473-42-277 42W T4 triple GX24q-4
With integral electronic ballast.
iWay with Louvres 44I.B475-26-120 26W T4 quad G24q-3I.B475-26-277 26W T4 quad G24q-3
I.B475-32-120 32W T4 triple GX24q-3I.B475-32-277 32W T4 triple GX24q-3
I.B475-42-120 42W T4 triple G24q-4I.B475-42-277 42W T4 triple G24q-4
With integral electronic ballast.
accessories
code
code lamp
125
Photometric files are available at: www.iguzzini-na.com/downloads
iWaydesign: J. M. Wilmotte
15
iWay with Diffuser 28I.B477-18-120 18W T4 quad G24q-2I.B477-18-277 18W T4 quad G24q-2
I.B476-26-120 26W T4 quad G24q-3I.B476-26-277 26W T4 quad G24q-3
I.B476-32-120 32W T4 triple GX24q-3I.B476-32-277 32W T4 triple GX24q-3
With integral electronic ballast
iWay with Diffuser 44I.B478-26-120 26W T4 quad G24q-3I.B478-26-277 26W T4 quad G24q-3
I.B478-32-120 32W T4 triple GX24q-3I.B478-32-277 32W T4 triple GX24q-3
With integral electronic ballast
6-5/8”
43-3
/4”
6-5/8”
28-3
/8”
Mounting plate with anchor boltsI.B513
code lamp
accessories
code
126
Photometric files are available at: www.iguzzini-na.com/downloads
iWaydesign: J. M. Wilmotte
15
iWay Small with Diffuser 25I.B479-120 13W T4 quad G24q-1I.B479-277 13W T4 quad G24q-1
With integral electronic ballast.
iWay Small with Diffuser 40I.B480-120 13W T4 quad G24q-1I.B480-277 13W T4 quad G24q-1
With integral electronic ballast.
3-1/2”
41”
3-1/2”
25-3
/4”
Mounting plate with anchor boltsI.B514
code lamp
accessories
code
127
Photometric files are available at: www.iguzzini-na.com/downloads
iWaydesign: J. M. Wilmotte
15
iWay Large Square 24I.B482-120 35W T6 G12I.B482-277 35W T6 G12
I.B483 22W CDM-Tm* PGJ5 120V
With integral electronic ballast.* new Mini Master Color (Philips)
iWay Large Square 40I.B485-120 35W T6 G12I.B485-277 35W T6 G12
I.B486-120 70W T6 G12I.B486-277 70W T6 G12
With integral electronic ballast.
6-5/8”
39-3
/8”
6-5/8”
24”
Mounting plate with anchor boltsI.B513
Screen for asymmetrical 180° emissionI.B503
Available in color 02
Screen for 90°+ 90° emissionI.B505
Available in color 02
Screen for 180° emission + light bladeI.B507
Available in color 02
code lamp
accessories
code code
128
Photometric files are available at: www.iguzzini-na.com/downloads
iWaydesign: J. M. Wilmotte
15
iWay Small Square 24I.B488 22W CDM-Tm* PGJ5 120VI.B489 5W Led white 120VI.B491 5W Led blue 120V
With integral electronic ballast or power supply.* new Mini Master Color (Philips)
iWay Small Square 40I.B492 22W CDM-Tm* PGJ5 120V
With integral electronic ballast.* new Mini Master Color (Philips)
3-1/2”
39-3
/8”
3-1/2”
24”
Mounting plate with anchor boltsI.B514
Screen for asymmetrical 180° emissionI.B504
Available in color 02
Screen for 90°+ 90° emissionI.B506
Available in color 02
Screen for 180° emission + light bladeI.B508
Available in color 02
code lamp
accessories
code code
129
i Waydesign: J. M. Wilmotte
Sole 24 Ore Headquarters Milan - Italy Architectural project Renzo Piano Building Workshop
130
Pencildesign: J. M. Wilmotte
fluorescent lamps.
3” x 8” rectangular.
49-1/2” heights.
aluminum with a base made of die cast copper free aluminum and is secured to the concrete by means of (3) three an-chor rods. There are (3) three internal tie rods that continue upward to just below the optical compartment. This method ensures a rugged and highly vandal resistant installation.
completely sealed to IP66 rating and is completely removed for relamping.
secured to the lens assembly by means of a die cast bayonet closure system which is removable for relamping. The tamperproof hardware again ensures a high degree of vandal resistance.
or two sided configurations.
through the use of internal louver assemblies.
not exceed 125°F.
chromium phosphate plating treatment prior to the final baked organic textured finish coat. This ensures a finish of extremely long life and corrosion resistance.
This fixture is rated IP66. UL Listed “Suitable for Wet Location”
Anti-vandalism diffuser and strcture
Resistant to uprooting
Anti-corrosion
131
Photometric files are available at: www.iguzzini-na.com/downloads
Pencildesign: J. M. Wilmotte
15
Pencil Small 16Single light emissionI.B493-120 8W T5I.B493-277 8W T5
With integral electronic ballast.
Pencil Medium 25Single light emission I.B494-120 14W T5I.B494-277 14W T5
Double light emissionI.B495-120 2x14W T5I.B495-277 2x14W T5
With integral electronic ballast.
Pencil Large 49Single light emissionI.B496-120 28W T5I.B496-277 28W T5
Double light emissionI.B497-120 2x28W T5I.B497-277 2x28W T5
With integral electronic ballast.
3-3/8”
15-3
/8”
5-1/8”
25-3
/4”
5-1/8”
49-1
/2”
code lamp
132
Photometric files are available at: www.iguzzini-na.com/downloads
Pencildesign: J. M. Wilmotte
Colored filtersI.B525 15-3/4”for I.B493I.B526 25-5/8”for I.B494, I.B495 I.B527 49-1/4”for I.B496, I.B497
Available in colors 05-06-07-09
Clear diffuserI.B534 15-3/4”for I.B493I.B535 25-5/8”for I.B494, I.B495 I.B536 49-1/4”for I.B496, I.B497
Available in color 24
Longitudinal baffleI.B519 15-3/4”for I.B493I.B520 25-5/8”for I.B494, I.B495 I.B521 49-1/4”for I.B496, I.B497
Available in color 02
Screen for light ray effectI.B531 15-3/4”for I.B493I.B532 25-5/8”for I.B494, I.B495 I.B533 49-1/4”for I.B496, I.B497
Available in color B5
Mounting plate with anchor boltsI.B515
for I.B493I.B516
for I.B494, I.B495, I.B496, I.B497
Transverse baffleI.B537 15-3/4”for I.B493I.B538 25-5/8”for I.B494, I.B495 I.B539 49-1/4”for I.B496, I.B497
Available in color 02
The longitudinal and transversal baffles must be applied with a clear diffuser
accessories and components
code code
133
Photometric files are available at: www.iguzzini-na.com/downloads
Pencildesign: J. M. Wilmotte
America Cup “Sails and Wind” Building Valencia, Spain
134
Photometric files are available at: www.iguzzini-na.com/downloads
Pencildesign: J. M. Wilmotte
15
Pencil 15Single light emissionI.B498-120 8W T5I.B498-277 8W T5
With integral electronic ballast.
Pencil 25Single light emissionI.B499-120 14W T5I.B499-277 14W T5
Double light emissionI.B500-120 2x14W T5I.B500-277 2x14W T5
With integral electronic ballast.
Pencil 50 Single light emissionI.B501-120 28W T5I.B501-277 28W T5
Double light emissionI.B502-120 2x28W T5I.B502-277 2x28W T5
With integral electronic ballast.
3”
8”
3”
8”
3”
8”25
-3/4
”49
-3/8
”15
-3/8
”
code lamp
135
Photometric files are available at: www.iguzzini-na.com/downloads
Pencil design: J. M. Wilmotte
Colored filtersI.B528 15-3/4”for I.B498I.B529 25-1/2”for I.B499, I.B500 I.B530 49-1/4”for I.B501, I.B 502
Available in colors 05-06-07-09
Clear diffuserI.B543 15-3/4”for I.B498I.B544 25-1/2”for I.B499, I.B500 I.B545 49-1/4”for I.B501, I.B502
Available in color 24
Longitudinal baffleI.B522 15-3/4”for I.B498I.B523 25-1/2”for I.B499, I.B500 I.B524 49-1/4”for I.B501, I.B502
Available in color 02
Mounting plate with anchor boltsI.B517
for I.B498, I.B499, I.B500, I.B501, I.B502
Transverse baffleI.B540 15-3/4”for I.B498I.B541 25-1/2”for I.B499, I.B500 I.B542 49-1/4”for I.B501, I.B502
Available in color 02
The longitudinal and transversal baffles must be applied with a clear diffuser
accessories and components
code code
136
Article index
Code Page Weight
4400 104 4401 104 4402 104 I.0043 76-81 0,01 0,0 I.0044 75-81 0,05 0,1 I.0045 77-79- 81 0,07 0,2 I.0233 91 0,03 0,1 I.0456 21-23 0,40 0,9 I.1028 93 1,50 3,3 02 15 I.1029 93 1,90 4,2 02 15 I.1079 91 1,90 4,2 02 15 I.1080 91 1,20 2,6 02 15 I.1148 31 3,10 6,8 15I.1149 31 2,50 5,5 15I.1158 50 00 05 06 09I.1159 51 00 05 06 09I.1160 52 00 05 06 09I.1170 21-23 0,90 2,0 I.1171 21-23 1,10 2,4 I.1172 21 0,50 1,1 I.1173 21 2,30 5,1 15I.1174 23 1,30 2,9 15I.1175 21-23 1,20 2,6 02I.1176 21-23- 31 0,70 1,5 02I.1177 21-23- 31 0,60 1,3 02I.1178 21-23 0,90 2,0 02I.1179 23 1,00 2,2 15I.1181 37 0,04 0,1 24I.1182 37 0,04 0,1 15I.1183 37 0,03 0,1 I.1184 37 0,40 0,9 15I.1185 39-41 0,10 0,2 24I.1186 39-41 0,10 0,2 15I.1187 39 0,20 0,4 I.1188 39 0,20 0,4 15I.1189 39 0,20 0,4 15I.1190 39 0,30 0,7 15I.1194 97 05 06 09 I.1195 50 24I.1196 51 24I.1197 52 24I.1345 7 6,00 13,2 15I.1880 69 I.2927 109 02I.4160 6 15I.4172 6 15I.4452 31 0,40 0,9 02I.4453 31 0,20 0,4 02I.5632 85 2,40 5,3 01 02 15 I.5633 85 2,30 5,1 01 02 15 I.5634 84 2,00 4,4 01 02 15 I.5635 84 2,70 6,0 01 02 15 I.5636 84 2,60 5,7 01 02 15 I.5650 50-62- 65-68 15I.5651 50-62- 65-68 15I.5652 50-62- 65-68 15I.5658 51-62- 65-68 15
Code Page Weight
I.5659 51-62- 65-68 15I.5660 51-62- 65-68 15I.5666 51-62- 65 15I.5667 52 15I.5668 52 15I.5669 52 15I.5671 52 15I.5673 52 15I.5674 52 15I.5675 50-62-65 15I.5676 50-62-65 15I.5677 50-62-65 15I.5680 51-62-65 15I.5681 51-62-65 15I.5682 51-62-65 15I.5683 51-62-65 15I.5684 50-62-65 15I.5685 50-62-65 15I.5686 85 5,30 11,7 01 02 15 I.5687 85 5,20 11,5 01 02 15 I.5688 84 4,90 10,8 01 02 15 I.5689 84 5,60 12,3 01 02 15 I.5690 84 5,50 12,1 01 02 15 I.5927 41 15I.5928 41 15I.5929 41 15I.5930 41 15I.5931 97 02 15I.5932 97 01 02 15 I.5933 97 I.5937 50 02I.5938 51 02I.5939 52 02I.5940 50 15I.5941 51 15I.5942 52 15I.5943 50 11I.5944 51 11I.5945 52 11I.5949 50-51- 52 I.5951 50-51- 52 15I.5952 50 02I.5953 51 02I.5954 52 02I.5955 62 15I.5956 62 15I.5957 62 15I.5958 62 15I.5959 62 15I.5960 62 15I.5961 62 15I.5963 62 15I.5964 62 15I.5965 62 15I.5966 62 15I.5968 62 15I.5969 62 15I.5970 62 15I.5971 62 15
Code Page Weight
I.5972 62 15I.5973 62 15I.5974 62 15I.5975 62 15I.5976 62 15I.5977 62 15I.5978 62 15I.5979 62 15I.5980 62 15I.5983 53 15I.5984 53 15I.5994 53 15I.6012 69 15I.6013 69 15I.6014 69 15I.6015 69 15I.7012 22 7,80 17,2 73I.7013 22 3,60 7,9 73I.7017 21 6,50 14,3 73I.7018 23 2,40 5,3 73I.7019 20 9,20 20,3 73I.7027 21 6,60 14,6 73I.7028 23 2,40 5,3 73I.7029 20 9,20 20,3 73I.7032 21 6,60 14,5 73I.7034 20 9,50 20,9 73I.7063 81 3,10 6,8 02 15 I.7077 81 2,80 6,2 02 15 I.7095 81 2,10 4,6 02 15 I.7113 71 0,90 2,0 01 02 15 I.7116 71 1,10 2,4 01 02 15 I.7117 71 1,90 4,2 01 02 15 I.7119 71 1,90 4,2 01 02 15 I.7125 81 1,90 4,2 02 15 I.7127 81 3,20 7,1 02 15 I.7129 81 2,80 6,2 02 15 I.7200 109 13I.7201 109 13I.7202 109 13I.7206 87 3,20 7,1 02 15 I.7207 87 3,20 7,1 02 15 I.7208 115 6,00 13,2 02 15 I.7209 115 6,00 13,2 02 15 I.7210 115 6,00 13,2 02 15 I.7211 79 2,90 6,4 01 02 15 I.7212 79 2,60 5,7 01 02 15 I.7213 79 3,00 6,6 01 02 15 I.7214 79 2,70 6,0 01 02 15 I.7284 117 4,10 9,0 02 15 I.7285 117 4,50 9,9 02 15 I.7288 113 6,40 14,1 02 15 I.7289 113 6,40 14,1 02 15 I.7290 93 6,00 13,2 02 15 I.7291 93 6,00 13,2 02 15 I.7295 93 6,10 13,4 02 15 I.7296 93 6,10 13,4 02 15 I.7334 38 2,00 4,4 15I.7335 38 2,00 4,4 15I.7338 38 1,10 2,4 15I.7339 38 1,10 2,4 15I.7350 38 3,20 7,0 15I.7352 38 2,10 4,6 15I.7353 38 2,20 4,9 15I.7354 38 2,20 4,9 15
137
Photometric files are available at: www.iguzzini-na.com/downloads
Article index
Code Page Weight
I.7357 38 1,40 3,1 15I.7358 38 1,40 3,1 15I.7365 91 3,60 7,9 02 15 I.7366 91 4,90 10,8 02 15 I.7367 91 3,70 8,2 02 15 I.7368 91 5,10 11,2 02 15 I.7376 30 6,00 13,2 15I.7377 30 6,00 13,2 15I.7378 30 7,00 15,4 15I.7379 30 6,00 13,2 15I.7380 30 6,90 15,2 15I.7385 29 6,00 13,2 15I.7386 29 6,90 15,2 15I.7387 30 6,00 13,2 15I.7388 30 6,90 15,2 15I.7392 30 4,20 9,3 15I.7393 30 4,30 9,5 15I.7396 30 6,00 13,2 15I.7397 30 7,00 15,4 15I.7399 30 6,90 15,2 15I.7444 31 6,00 13,2 15I.7445 31 6,90 15,2 15I.7475 29 15I.7476 29 15I.7591 41 15I.7592 41 15I.7593 41 15I.7594 41 15I.7596 96 02 15 I.7597 97 02 15 I.7598 96 02 15 I.7599 97 02 15 I.7698 31 15I.7699 31 15I.7739 11 15I.7741 11 15I.9581 104 02I.B037 65 15I.B038 65 15I.B039 65 15I.B040 65 15I.B041 65 15I.B042 65 15I.B462 122 8,00 17,6 15I.B463 122 7,80 17,2 15I.B465 122 10,80 23,8 15I.B466 122 10,80 23,8 15I.B468 123 3,20 7,1 15I.B469 123 15I.B471 123 15I.B472 123 4,70 10,4 15I.B473 124 8,80 19,4 15I.B474 124 8,80 19,4 15I.B475 124 11,60 25,6 15I.B476 124 8,40 18,5 15I.B477 124 8,40 18,5 15I.B478 124 11,30 24,9 15I.B479 126 3,20 7,1 15I.B480 126 4,70 10,4 15I.B482 127 9,80 21,6 15I.B483 127 9,60 21,2 15
Code Page Weight
I.B485 127 13,50 29,8 15I.B486 127 13,50 29,8 15I.B488 128 3,70 8,2 15I.B489 128 15I.B491 128 15I.B492 128 15I.B493 131 15I.B494 131 15I.B495 131 15I.B496 131 15I.B497 131 15I.B498 134 15I.B499 134 15I.B500 134 15I.B501 134 15I.B502 134 15I.B503 122-127 02I.B504 123-128 02I.B505 122-127 02I.B506 123-128 02I.B507 122-127 02I.B508 123-128 02I.B513 122-125- 127 I.B514 123-126- 128 I.B515 132 I.B516 132 I.B517 135 I.B519 132 02I.B520 132 02I.B521 132 02I.B522 135 02I.B523 135 02I.B524 135 02I.B525 132 05 06 07 09 I.B526 132 05 06 07 09 I.B527 132 05 06 07 09 I.B528 135 05 06 07 09 I.B529 135 05 06 07 09 I.B530 135 05 06 07 09 I.B531 132 B5 I.B532 132 B5 I.B533 132 B5 I.B534 132 24I.B535 132 24I.B536 132 24I.B537 132 02I.B538 132 02I.B539 132 02I.B540 135 02I.B541 135 02I.B542 135 02I.B543 135 24I.B544 135 24I.B545 135 24I.B584 36 0,90 2,0 15I.B585 36 0,90 2,0 15I.B593 37 1,65 3,6 15I.B597 103 15I.B601 103 15
Code Page Weight
I.B603 104 15I.B605 104 15I.B607 104 15I.B609 104 15I.B611 104 15I.B613 102 13I.B615 102 13I.B617 102 13I.B695 75 01 02 15 I.B696 75 01 02 15 I.B697 75 01 02 15 I.B698 75 01 02 15 I.B699 76 01 02 15 I.B700 76 01 02 15 I.B701 76 01 02 15 I.B702 76 01 02 15 I.B703 76 01 02 15 I.B704 76 01 02 15 I.B705 76 01 02 15 I.B706 77 01 02 15 I.B707 77 01 02 15 I.B708 77 01 02 15 I.B709 76 01 02 15 I.B710 77 01 02 15 I.B711 77 01 02 15 I.B712 77 01 02 15 I.B869 96 02 15 I.B870 96 02 15 I.B875 97 I.B876 97 02 15 I.B881 96 02 15 I.B882 96 02 15 I.B887 97 02 15 I.B888 97 02 15 I.B915 104 02I.B988 37 0,30 I.BA97 103 15I.BA98 103 15I.BB02 103 15I.BB03 103 15I.BB06 104 15I.BB07 104 15I.BB08 104 15I.BB09 104 15I.BB10 104 15I.BB11 104 15I.BB12 104 15I.BB13 104 15I.BB14 104 15I.BB15 104 15I.BB16 102 13I.BB17 102 13I.BB18 102 13I.BB19 102 13I.BB20 102 13I.BB21 102 13I.BB61 96 02 15 I.BB62 97 02 15 I.BB63 96 02 15 I.BB64 97 02 15
138
Photometric files are available at: www.iguzzini-na.com/downloads
Lamp Guide
Compact fluorescent lamp T4 twin 9 G23 3500 580 10000
Compact fluorescent lamp T4 quad 13 G24q-1 3500 900 10000
Compact fluorescent lamp T4 quad 18 G24q-2 3500 1250 10000
Compact fluorescent lamp T4 quad 26 G24q-3 3500 1800 10000
Compact fluorescent lamp T4 triple 26 GX24q-3 3500 1800 10000
Compact fluorescent lamp T4 triple 32 GX24q-3 3500 2400 10000
Compact fluorescent lamp T4 triple 42 GX24q-4 3500 3200 10000
Compact fluorescent lamp T4-T 26 GX24q-3 2700 1800
Compact fluorescent lamp T4-T 26 GX24q-3 3500 1800
Compact fluorescent lamp T4-T 26 GX24q-3 4100 1800
Fluorescent lamps T5 8 Mini Bipin 4100 850 20000
Fluorescent lamps T5 14 Mini Bipin 3500 1350 20000
Fluorescent lamps T5 21 Mini Bipin 3500 2100 20000
Fluorescent lamps T5 28 Mini Bipin 3500 2900 20000
Halogen lamp T4 90 12 GY6.35 1750 3000
Halogen lamp T4 25 120 G9 255 2000
Halogen lamp T3 150 120 RSC 2400 2000
Halogen lamp AR111 8° 50 12 G53 23000 3000
Halogen lamp AR111 24° 50 12 G53 4000 3000
Halogen lamp T3 300 120 RSC 3000 5600
Halogen lamp T4 50 12 GY6.35 3000 930
Halogen lamp T4 100 120 Q/DC 3000 1430
Incandescent lamp A19 60 120 med. base 640 1000
Incandescent lamp 75 120 med. base 850 750
Metal Halide ceramic CDM-tm 20 PGJ5 3000 1650 9000
Metal Halide ceramic T4.5 20 G8.5 3000 1700 9000
Metal Halide ceramic T6 20 G12 3000 1800 9000
Metal Halide ceramic T6 39 G12 3000 3400 10000
Metal Halide ceramic T6 70 G12 3000 7100 10000
Metal Halide ceramic T6 70 RSC 3000 6500 12000
Metal Halide ceramic CDM-R111 39 GX8.5 3000
Metal Halide ceramic T9.5 250 Fc2 4200 20000
Metal Halide ceramic T6 70 RX7s RSC 3000 7000
Metal Halide ceramic T6 150 RX7s RSC 3000 14000
Metal Halide ceramic T14.5 250 E39 Mogul 4200 20000
Metal Halide ceramic T14.5 400 E39 Mogul 6100 32000
Metal Halide ceramic T6 35 G12 3000 3300
Metal Halide ceramic T6 70 G12 3000 3300
Metal Halide ceramic T6 150 G12 3000 14000
Metal Halide ceramic T7.5 70 G12 3000 5200
Metal Halide ceramic T7.5 150 G12 3000 12000
Metal Halide ceramic E17 Clear 70 E26 Med. 3000 5200
Metal Halide ceramic E17 Coated 70 E26 Med. 3000 4700
Metal Halide ceramic E17 Clear 150 E26 Med. 3000 12900
Metal Halide ceramic E17 Coated 150 E26 Med. 2900 11600
Metal Halide ceramic BT28 250 E39 Mogul 4200 23500
Metal Halide ceramic BT28 400 E39 Mogul 4000 42000
Description Lamp Wattage Voltage Socket Color Lumens Av. Functional type (W) (V) temperature (lm) life acc. to index (K) manuf. Spec.
Catalogues and detailed technical drawings are available upon request.
139
Photometric files are available at: www.iguzzini-na.com/downloads
Technical information
First Degree of protection number
against penetration of solids
0 Non-protected
1 Protected against solid objects greater then 19-3/4”
2 Protected against solid objects greater then 4-3/4”
3 Protected against solid objects greater then 1”
4 Protected against solid objects greater then 1/16”
5 Dust-protected
6 Dust-tight
Second Degree of protection number
against penetration of liquids
0 Non-protected
1 Protected against dripping water
2 Protected against dripping water when tilted up to 15˚
3 Protected against spraying water
4 Protected against splashing water
5 Protected against water jets
6 Protected against heavy seas
7 Protected against the immersion
8 Protected against submersion
---m
All products in this catalog are manufactured to meet the standards of applicable local electrical codes. The reference to the IP System of protection is for the designers use in determining the appropriateness of a product for the application.
140
Photometric files are available at: www.iguzzini-na.com/downloads
Other catalogues
2009-2010
Internal lighting system
Internal lighting system
Static load strength 11000 Ibs
Temperature
t < 167°F
Visual comfort
Double insulation
Light Up Walk professional
Visual comfort
“All glass” flush version
Stainless Steel frame version
Compact height
< 4”
Temperature
< 104° F
Static load bearing
strength: 1100/2200 lb
Ledplus
Light Up Walk Ledplus
Colors
02 – Black
01 – White
Glass Color
00 – Frosted Glass
05 – Red
06 – Yellow
07 – Green
09 – Blue
24 – Clear transparent
Metal Finish
11 – Aluminium
13 – Stainless steel
15 – Dark grey
B5 – Grey white
73 – Grey/yellow
LACMA, Los Angeles, Renzo Piano Building Workshop & Arup Lighting
McCord Museum, Montreal, Éclairage Public
Saint-Sacrement Sanctuary, Montreal, Éclairage Public
Prin
ted
in C
anad
a 0
5-09
Montreal
5455 de Gaspé AveSuite 100 Montréal, Québec Canada H2T 3B3P: 514 523-1339 F: 514 525-6107
Toronto
46 Spadina AveToronto, Ontario Canada M5V 2H8P: 416 408-3995 F: 416 408-4269
Vancouver
827 Powell StreetVancouver, BC Canada V6A 1H7P: 604 215-1539 F: 604 215-1548
New York
60 Madison Ave 2nd floorNew York, NY, 10010P: 514 788-4672F: 514 525-6107