ifr6000 v2.02 summary chg sftwr firmware upgrd

2
SUMMARY OF CHANGES IFR 6000 XPDR/DME/TCAS/ADS-B/TIS/TIS-B TEST SET SOFTWARE/FIRMWARE UPGRADE Page 1 of 2 4/28/2009 Purpose The purpose of this document is to describe the changes from Software Version 1.09.00 to 2.02.00 for the IFR 6000. Contact Aeroflex for more information: Aeroflex Customer Service Dept. 10200 W. York Wichita, KS 67215 Telephone: (800) 835-2350 FAX: (316) 524-2623 Email: [email protected] Corrections/Enhancements DME Mode: IDENT now selectable between OFF/TONE/MORSE CODE. Improved how Range Slewing works XPDR Mode: Fixed problem where ERP measurement in Watts didn’t match dBm measurement when doing the data dump. Changed Diversity test so test will not fail if aircraft is on ground. Changed Mode S All-Call test to not fail if aircraft is on ground but will if in air. Dump Store softkey only shown if valid store is selected. When doing a Dump Store, the date and time of when the data was stored is shown instead of the current date and time. Fixed XPDR Auto screen where the Bottom MTL is inadvertently shown in the Top MTL. ADSB Mode: Added five new ADSB screens: MON 0,A; MON 6,5; GICB 6,5; GEN 0,A; GEN 6,5. STORE/RECALL added

Upload: interogator5

Post on 13-Apr-2016

8 views

Category:

Documents


0 download

DESCRIPTION

IFR6000 Summary

TRANSCRIPT

Page 1: IFR6000 V2.02 Summary Chg Sftwr Firmware Upgrd

SUMMARY OF CHANGES

IFR 6000

XPDR/DME/TCAS/ADS-B/TIS/TIS-B TEST SET

SOFTWARE/FIRMWARE UPGRADE

Page 1 of 2

4/28/2009

Purpose

The purpose of th is document is to descr ibe the changes f rom Sof tware Vers ion 1.09.00 to 2 .02.00 for the IFR 6000 .

Contact Aerof lex fo r more in format ion:

Aerof lex Customer Serv ice Dept . 10200 W. York Wich i ta , KS 67215

Telephone: (800) 835-2350 FAX: (316) 524-2623 Emai l : amer icas.serv ice@aerof lex .com

Corrections/Enhancements

DME Mode:

IDENT now se lec tab le between OFF/TONE/MORSE CODE.

Improved how Range Slewing works

XPDR Mode:

Fixed prob lem where ERP measurement in Wat ts d idn ’ t match dBm measurement when do ing the data dump.

Changed Dive rs i ty tes t so tes t wi l l no t fa i l i f a i rc ra f t is on ground .

Changed Mode S Al l -Cal l tes t to not fa i l i f a i rc ra f t is on ground bu t wi l l i f in a i r .

Dump Store sof tkey on ly shown i f va l id s to re is se lec ted.

When do ing a Dump Sto re, the date and t ime of when the da ta was s to red is shown ins tead of the cur rent da te and t ime.

F ixed XPDR Auto screen where the Bot tom MTL i s inadver tent ly shown in the Top MTL.

ADSB Mode:

Added f ive new ADSB sc reens: MON 0,A; MON 6,5; GICB 6 ,5; GEN 0,A; GEN 6,5.

STORE/RECALL added

Page 2: IFR6000 V2.02 Summary Chg Sftwr Firmware Upgrd

SUMMARY OF CHANGES

IFR 6000

XPDR/DME/TCAS/ADS-B/TIS/TIS-B TEST SET

SOFTWARE/FIRMWARE UPGRADE

Page 2 of 2

4/28/2009

TCAS Mode:

I f TCAS opt ion is not ins ta l led, press ing the TCAS but ton wi l l d isp lay “TCAS Unavai lab le , Opt ion has not been purchased” .

Fixed an issue wi th squi t ters not a lways s tar t ing when the test is star ted.

Genera l:

Removed USB se lec t ion as an opt ion for remote contro l as i t has not been implemented.

Correc ted a prob lem wi th ins ta l led opt ions d isappear ing when an opt ion f i le for another un i t is t r ied to be ins ta l led.

Added a power-up warn ing i f any ca l ibra t ion data has changed to the de fau l t data to ind icate poss ib le error condi t ions in the un i t .

USB upgrades can now handle FAT32 format on the USB memory dr ives .

NOTE : Updat ing the sof tware in the IFR 6000 wi th vers ion 2.02.00 wi l l no t a f fec t the ca l ibra t ion of the un i t .