if we told you that we have a tool that gives you higher
TRANSCRIPT
309 NW 13th
Ave. P.O. Box 56 * Little Falls, MN 56345 * (800) 450-8665 * E-Mail: [email protected]
1-800-450-8665 www.precisiontooltech.com
If we told you that we have a tool that gives you higher
quality results than a foam tool, would you buy it?
Now, if we told you that we have a tool that not only
gives you higher quality, but is cheaper than a foam
tool, would you buy it?
YES!
Using our ACCU LAP System you can now cut a Dura Lap tool, reuse
it and cut it again and again, reduce breakage and saving you money!
Precision’s ACCU LAPS will also provide you with a higher quality
tool, resulting in higher quality lenses!
ACCU LAPS are available in 2.25”, 2.50” and 3.00” diameters.
309 NW 13th
Ave. P.O. Box 56 * Little Falls, MN 56345 * (800) 450-8665 * E-Mail: [email protected]
1-800-450-8665 www.precisiontooltech.com
Eliminate the trail of foam tools and lenses going into the landfill. The ACCU Dura Laps
comes in 4 diameters and will cover almost all power requirements. The keyed orientation
footer maintains the base/cross relation on all cuts.
The Accu Lap system consists of an aluminum footer and extruded plastic Dura Lap cap.
The two mate together so the footer can be used indefinitely, while the cap can be cut many
times. When ordering the ACCU LAPS, you can order them by base curve for more
efficient tool management. Once you have cut the tool, you can decide to add it to your tool
set or you can place it in the bin separated by base curve for future cuts.
Advantages for using ACCU LAPS vs. Foam Tools:
1) You can order the Accu Laps by base curve and you don’t have to
order them by case quantity, you can order them by the each, saving
you space and money.
2) Consistent material and ease of cutting gives your lab a higher
quality tool resulting in higher quality lenses.
3) Less waste going to the landfill.
4) Improve and expand your current tool set with the Accu Laps
which you can incorporate into your current tool set.
5) Available in different diameters to give you more flexibility than
foam tools.
309 NW 13th
Ave. P.O. Box 56 * Little Falls, MN 56345 * (800) 450-8665 * E-Mail: [email protected]
1-800-450-8665 www.precisiontooltech.com
Instructions for ACCU LAPS:
1) Pick the diameter and base curve of the tool for the most efficient use of the
tool for the job.
2) Tighten screws to the aluminum footer, 2” footer is used with 2.25” and
2.50” diameter tools. The 3” footer is used with the 3.00 diameter tools.
3) Place the tool in the chuck.
4) Program generator and place chuck and tool in generator.
309 NW 13th
Ave. P.O. Box 56 * Little Falls, MN 56345 * (800) 450-8665 * E-Mail: [email protected]
1-800-450-8665 www.precisiontooltech.com
309 NW 13th
Ave. P.O. Box 56 * Little Falls, MN 56345 * (800) 450-8665 * E-Mail: [email protected]
1-800-450-8665 www.precisiontooltech.com
ORDER FORM QTY PTT PART# DESCRIPTION PACK PRICE
ACCU LAPS
DLSP225-PL-1600 ACCU LAP PLANO BASE 2.25" DIAMETER 1.60" THICKNESS EACH $5.25
DLSP225-10-1600 ACCU LAP 10 BASE 2.25" DIAMETER 1.60" THICKNESS EACH $5.25
DLSP250-PL-1600 ACCU LAP PLANO BASE 2.50" DIAMETER 1.60" THICKNESS EACH $5.25
DLSP250-8-1600 ACCU LAP 8 BASE 2.50" DIAMETER 1.60" THICKNESS EACH $5.25
PTT2355-ASSY ALUMINUM ACCU LAP BASE 2.00" EACH $50.55
DLLP300-PL-1500 ACCU LAP PLANO BASE 3.00" DIAMETER/ 1.50" THICKNESS EACH $5.45
DLLP300-4-1500 ACCU LAP 4 BASE 3.00" DIAMETER/ 1.50" THICKNESS EACH $5.45
PTT2356-ASSY ALUMINUM ACCU LAP BASE 3.00" EACH $54.95
All pricing and terms are subject to change without notice. All shipments are F.O.B. Precision Tool
Technologies Manufacturing Facilities.
Phone or fax in your order today! Pete Olson Jan Hanson
Sales Customer Service [email protected] [email protected]
Phone/Fax: 800-450-8665 Fax: 320-632-5452