if-commercial-ironer-feeder-folder-brochure.pdf
TRANSCRIPT
7/27/2019 IF-Commercial-Ironer-Feeder-Folder-Brochure.pdf
http://slidepdf.com/reader/full/if-commercial-ironer-feeder-folder-brochurepdf 1/2
IFSERIES
24 & 32 inch diameter 126 inch width
Roll Ironer with Feeder & Folder
Features at a Glance:· Easy to use controls· Nomex padding and belts· Built in exhaust
· Heavy duty frame· Fully enclosed for heat retention· Optional stacker on the left or
right, front or rear return· Many safety features:
Circuit protectionInterlocked panelsEmergency stopsFinger safety
The IF Series of compa
combination feeder, irone
folder provides unmatche
results for processing linen
and other flat goods. Th
compact design saves flo
space and allows increase
productivity in a small amou
of space. High efficiency, fewer parand low maintenance lead to increased saving
over the life of the machine. The energy efficie
drive system allows for incredibly flexible operatio
precise speed control, and protection for the moto
The soft start technology greatly reduces stress o
critical components, contributing to a longer life f
the machine. The optional feeding section allow
one operator to feed large items quickly. The ironisection pulls the goods over the heated cylind
while the folding section performs two length fol
via air blasts into reversing rollers. The stacki
system collects the folded linens and delivers the
away from the machine. Number of items stacked
programmable. Productivity in a compact space
the IF Series from B&C Technologies.
7/27/2019 IF-Commercial-Ironer-Feeder-Folder-Brochure.pdf
http://slidepdf.com/reader/full/if-commercial-ironer-feeder-folder-brochurepdf 2/2
SpecicationsStandard Features
t 20 different programs
t Bypass for front or rear exit
t Steam or gas heating
t Gas heated models for natural propane gas
t Self cleaning fans
t Automatic cool down
t Variable speed drive with softstarting
t Electronic digital temperature c
t Electrical and mechanical safetdevices
t Up to 475 pounds per hour prod(if using high speed B&C washe
t Small machine footprint, just ov100 square feet required
Optional Features
t Stacker
t Automatic feeder
t Vacuum table
t 2 or 4 lanes
&C Technologies250 West 17th Streetanama City, FL 32405
850-249-2222850-249-2226
Due to our policy of ongoing improvements, all specifications are subject to change without notice.
ODEL Metric US
oll Diameter mm inch 600 24 800 32
orking Width mm inch 3200 126 3200 126
- Width mm inch 5530 217.7 5590 220.1
- Depth mm inch 2715 106.9 2860 112.6- Height mm inch 2135 84.1 2335 91.9
et Weight kg lbs 3250 7150 4000 8800
ipping Weight kg lbs 3350 7370 4100 9020
8-240VAC, 50/60Hz, 3PH Amps Breaker 24 30 26 30
0-480VAC, 50/60Hz, 3PH Amps Breaker 14 20 16 20
et
onsumption L/h cfm 21000 12.3 24000 14.1
eat Input kCal/hr BTU/hr 70550 279965 109560 434769
as Inlet
eam Consumption kg/hr BHP 145 9.3 185 11.9
eam Inleteam Return
ameter (2 per machine) mm inch 120 4.7 120 4.7
xhaust
inch 1 1
IF-32126
1
IF-24126
LECTRICAL SERVICE:
UMBER OF ROLLS
MENSIONS
EIGHT AND SHIPPING
1
NEUMATICS:
AS:
TEAM:
inch
mm 12 12
inch1
1/21
1/2
A B
C