ievc conference, greenville, sc march 8, 2012 ml chan, phd, ml consulting group (tf2 lead) jim hall,...

IEVC Conference, Greenville, SC March 8, 2012 ML Chan, PhD, ML Consulting Group (TF2 Lead) Jim Hall, AKF Group (Subgroup Lead) Laura Manning, OPPD (Subgroup Lead) Mike Henderson, ISO-NE (Subgroup Lead) Spyros Skarvelis-Kazakos, Cardiff University (Subgroup Lead) 1

ML Chan, PhD Sr. Vice President ML Consulting Group [email protected] 2

Objectives of TF2 Report IEEE Standard Association activities; to provide guidelines for development standards for integrating EVs into electric grid TF1 EV Technology; TF3 - Cybersecurity & IT Infrastructure; TF4 Communications & Cybersecurity; TF5 Battery Technology; TF6 Chargers & Charging; TF2: Impacts on Energy Supply, Transmission, Distribution and Customer Sectors; part of P2030.1 report EVs include Plug-in Hybrid Electric Vehicles (PHEVs,) Extended Range Electric Vehicles ( EREVs) Battery-powered Electric Vehicles ( BEVs) Fleet Electric Vehicles 3

Impacts Considered Long term system resource planning case Capacity issues System reliability Power system operations case Each case with 2 scenarios EVs acting as a load EVs acting a source (V2H or V2G) Each scenario with 2 vehicle charging cases Uncontrolled charging Controlled charging (e.g., electricity TOD rates) 4

EV Charging Load Shapes The most critical driver to understand and predict EV impacts on grids that vary by Electrical subsystem (substation/distribution transformers) Weather region (lifestyles) Urban/suburb/rural areas Income level Roaming pattern Further complicated by EVs serving as source, in addition to serving as load 5

Detailed Grid Impacts Customer grid impacts (Jim Hall, AKF Group) Distribution system impacts (Laura Manning, OPPD) Transmission system impacts (Mike Henderson, ISO-NE) Generation system impacts (Spyros Skarvelis- Kazakos, Cardiff University) Format of discussion on each sectors impacts Presentation by each Subgroup Lead Comments/Inputs at the end of each presentation 6

7 IEEE P2030.1 TF2 Contributors Henry Chao, New York ISO Liana Cipcigan, Cardiff University, UK Thomas Domitrovich, Eaton Corporation, PA, USA Dr Fainan Hassan, Alstom T&D Aoife Foley, University College Cork & Queen's College, Belfast Iaki Grau, Cardiff University, UK Rao Konidena, MISO Jeremy Landt,Transcore Don Marabell, GE Energy

8 IEEE P2030.1 TF2 Contributors Tony McGrail, US National Grid Brian McMillan, Greater Sudbury Hydro Inc., ON, Canada Patti Metro, NRECA Dale Osborn, MISO Panagiotis Papadopoulos, Cardiff University, UK Bob Saint, NRECA, VA, USA Jose Salazar, Southern California Edison, CA, USA Steve Widergren, PNL Mulu T. Woldeyohannes, Baker Hughes, TX, USA

IEEE P2030.1 TF2 Contributors John Bzura, ISO-NE Robert Leavy, Gannett Fleming Transit & Rail Systems Slide #9

By James Hall, AKF Group [email protected] 9

Impacts on Customers Service Overview Modes of Operation Charging Only EVs acting purely as a load Source V2H No Net-Metering Source V2G With Net-Metering Impact of Smart Meter Integration Information will have to be conveyed between customers charging equipment, meter, and grid operations. May have a significant impact on todays IT grid. 11

Impacts on Customers Service Overview 12 Specific Impacts Residential Characterized by single phase services consisting of equipment and capacities largely dictated by building codes. Many customers served by a single distribution transformer and feeder. Currently utility rates are flat with little use of time-of-use rates. Commercial Larger generally 3-phase distribution systems. Rates are generally complex time-of-use with seasonal ratcheting. Impacts are minimal for other than large fleet operations. Work Using this term to define the special situation where employees plug- in and charge their EVs on their employers property. Mass Transit EVs as busses plugged in and charging during evening hours.

Impacts on Customers Service Overview 13 Unique Characteristics of Customers Impacts. Impacts are building code driven. Infrastructure upgrades may be required to satisfy codes while actual impact to the grid is minimal. Impacts are a function of the level of charging. Faster charging rate equates to a larger connected load. In the case of a bi-directional charger the size of the connection to a main panel is limited by code to 20% of the size of the existing main (Assuming the size of the main is matched to the bus). Consideration should be given to minimize the impact on existing facilitys service and equipment.

EVs acting as a Load Load Issues Additional load entire charger load impacts equipment No Diversity Available Fault Currents On-Vehicle chargers will be subject to varying range of available fault currents. Power Quality Issues Non-Linear Loads Chargers will have to be single phase resulting in voltage balance issues. 14

EVs acting as a Load Home Energy Management Systems (HEMS) 15 HEMS may be used to coordinate household electric appliance loads with vehicle charging. The EV charger may be added to the HEMS as another appliance to be controlled. The HEMS may control the starting, stopping, and rate of charging to coordinate with the cycling of air conditioning compressors and hot water heaters. Cycling these loads to maintain an existing domestic load profile may delay the loading of distribution system components. Without Time-of-Use rates the customer will not have the incentive to coordinate his demand.

EVs Acting as a Load Specific Issues 16 Residential Customers Very easy to provide an on-board charger that will require infrastructure upgrades Commercial Customers Small impact except in the case of large fleet operations Work Impact on existing facilities service may be large May require a dedicated service for vehicle charging stations. Mass Transportation Charging load may be significant relative to transit hub facility load.

EVs Acting as a Source V2H 17 Connection Issues Parallel sources connected to a common bus. Sum of sources cannot exceed bus rating. Source of additional fault current Coordination and Protection Issues Islanding Synchronization assurances required to prevent closing an intermediate switch while discharging. Power Quality Issues DC Injection Harmonics

EVs Acting as a Source V2H Specific Issues 18 Residential Issues Chargers should be limited in size to preclude the requirement for service upgrades. Typical residential panel (100A or 200A) will be limited to a 20A or 40A (4.8 or 9.8 kVA) inverter connection. Commercial Issues May have connection point issues as utilities require parallel sources to be connected at the PCC. May only be practical when operating schedules coordinate with utility time-of-use rates. Work May only be practical by installing dedicated single phase services directly to charging stations equipped with smart metering technology.

EVs Acting as a Source V2G 19 Special Net-Meters are Required Metering Configurations Single meter location Not good for V2G. No special rates can be applied for ancillary services. Series Meter meter downstream of service main in dedicated charger circuit. Measures only chargers imported/exported power. Parallel Metering A second service to a facility dedicated to charging equipment.

EVs Acting as a Source V2G Specific Issues 20 Residential Customers Will require serial or parallel metering Of little benefit without AMI Commercial Customers Again, only practical for special situations where coordinate well with utility rates. Work Will require a dedicated charging service from the utility since single phase sources cannot be connected to three phase systems. May impact commercial facilities IT infrastructure. Mass Transportation The large batteries will provide a large centralized source to the grid. This source will only be available during off-peak hours.

By Laura Manning, OPPD [email protected] 22

Distribution System Section Impacts Covered From Distribution Substation To Distribution Transformer Secondary Step Down to Customer Voltage Existing &Future Distributed Generation Micro-grid Individual DG 23

Distribution System Impacts Overview Long-term Planning Effects Loads or Sources: Thermal Loading, Reactive losses and/or Inductive additions, Phase Imbalance, Asset Upgrade & Optimization, Advanced Metering Loads: Greater magnitude than traditional incremental additions Sources: Resemble Distributed Generation, Vehicle sourcing considerations and limitations System Operations Effects Loads or Sources: System Protection, Power Quality, Power Conditioning, Grid Stability/Reliability, Frequency Regulation/Synchronism, Phasing, Interactive Voltage Control/Phased Switching, Reactive Power Management, Demand Side Management, Controlled Import/Export from/to Grid, Cyber Security Loads: Greater magnitude than traditional incremental additions, Grid Stability/Reliability Sources: Resemble Distributed Generation, System Protection, Power Conditioning, Grid Stability/Reliability, Utility Personnel and Public Safety 24

Long-term / Planning Effects Uncontrolled Charging Higher Peaks Lower Valleys Higher Costs Controlled Charging/Discharging Voltage Support Charging Stations Voltage Source Converters (VSCs) Voltage Support & Control Rapid Real Power Transfer Frequency Regulation Load Following 25

Long-term Planning Effects EVs Acting as Loads and/or Sources Thermal Loading (United States) Plug-in vehicle type and range (100 - 120 V for 60 Hz freq.) SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler Distribution System Impacts Charging Levels Charger Type VoltageAmpsDemand Full Charge AC Level 1on-board120 VAC16 A1.92 kWhours AC Level 2 on-board 208 240 V AC 12 80 A2.5 19.2 kW fewer hours DC Level 3 off-board 300 600 V DC 250, 350 & 400 A75 240 kW minute s Slide #26

Long-term Planning Effects EVs Acting as Loads and/or Sources Thermal Loading (Europe) Plug-in vehicle type and range (220 - 240 V for 50 Hz freq.) IEC 61851-1 Electric vehicle conductive charging system - Part 1: General requirements Distribution System Impacts Chargin g Modes VoltageAmps Mode 1 max. 250 V AC or 480 V AC, 3-phase max. 16 A Mode 2 max. 250 V AC or 480 V AC, 3-phase max. 32 A Mode 3 max. 690 V AC, 3- phase max. 250 A Mode 4 max. 600 V DC max. 400 A Slide #27

Long-term Planning Effects EVs Acting as Loads and/or Sources Thermal Loading PEV market share and distribution Distribution System Impacts Penetratio n Possible Definition Possible Modifications System Impact Small Individual residence adds an EV or V2G EV Add proper receptacle to vehicle parking area. Older homes in older areas may require service, secondary or transformer upgrade. Many locations may not require any changes. Localized and diverse Medium 2 nd EV is added to a secondary that serves the 1st EV or V2G EV Might require larger conductors, additional conductors or a new pedestal. May need to replace transformers to meet peak load and design for lower overload capacity due to extended loading time. Services fed directly from transformers may require replacement of secondary and pedestals. Consider design changes for new installations in anticipation of further market penetration. Localized and diverse Slide #28

Long-term Planning Effects EVs Acting as Loads and/or Sources Distribution System Impacts Thermal Loading PEV market share and distribution Slide #29

Long-term Planning Effects EVs Acting as Loads and/or Sources Thermal Loading Typical charging/discharging profiles and peak demand/reverse power levels Spatial vs. roaming load distribution Mass electric transit systems Reactive losses and/or Inductive additions Phase Imbalance Distribution System Impacts Slide #30

Long-term Planning Effects EVs Acting as Loads and/or Sources Asset Upgrade & Optimization Distribution Transformer Primary Lateral Three Phase Feeder Substation Equipment Advanced Metering Transmit Demand & Supply Management Receive VIN, Demand & Supply Management Distribution System Impacts Slide #31

Long-term Planning Effects EVs Acting as Loads vs. EVs Acting as Sources EVs Acting as Loads Forward power flow perspective Magnitude > Traditional Incremental Load Challenging to model EVs Acting as Sources Reverse power flow on unidirectional assets Resemble distributed generation during discharge Equipment capable of bi-directional operation Vehicle sourcing considerations and limitations Distribution System Impacts Slide #32

System Operations Effects EVs Acting as Loads or Sources System Protection Relay Adaptability Operation caused by poor power quality Operation due to variations in AC frequency Misoperation due to Harmonic distortion/heating Power Quality Harmonics impact to connected components Flicker EMC/EMI Power Conditioning Voltage Regulators Capacitor Banks Distribution System Impacts Slide #33

System Operations Effects EVs Acting as Loads and/or Sources Grid Stability / Reliability Service Interruption & Restoration Frequency Regulation / Synchronism Phasing Interactive Voltage Control / Phased Switching Reactive Power Management Demand Side Management (DSM) Controlled Charge/Import & Discharge/Export Cyber Security Distribution System Impacts Slide #34

System Operations Effects EVs Acting as Loads vs. EVs Acting as Sources EVs Acting as Loads Forward power flow perspective Magnitude > Traditional incremental additions Challenging to model for grid stability/reliability EVs Acting as Sources Reverse power flow on unidirectional assets Resemble distributed generation during discharge Equipment capable of bi-directional operation System Protection Islanding Detection Bi-directional Power Flow Distribution System Impacts Slide #35

System Operations Effects EVs Acting as Sources EVs Acting as Sources Power Conditioning Voltage Regulators Mitigate Intermittency Additional Reactive Power Grid Stability / Reliability Service Interruption and Restoration Potential Hunting Subtransient voltage and current dynamics Utility Personnel and Public Safety Anti-Islanding (IEEE 1547) Distribution System Impacts Slide #36

Summary Design power charge/discharge to high standards Uncontrolled operation: Lower load factors & higher peaks Required distribution infrastructure upgrades Planning and Operations challenge to model the system Controlled operation: Load leveling = peak shaving + valley filling Delay distribution infrastructure upgrades Planning and Operations less challenging to model Intermittent/renewable/local Distribution support Distribution System Impacts 37

38 IEEE 2030.1 TF2 Draft Webinar Distribution System Impacts

Michael I. Henderson, ISO-NE Director, Regional Planning and Coordination [email protected] 39

Disclaimer Properly Presented Information Accurately represents the positions of ISO New England Inaccurate Information or Opinions that May Not Fully Agree with ISO New England My private views and are not meant to represent any organization with which I am affiliated 40

About ISO New England Not-for-profit corporation created in 1997 to oversee New Englands restructured electric power system Regulated by the Federal Energy Regulatory Commission (FERC) Regional Transmission Organization Independent of companies doing business in the market No financial interest in companies participating in the market Major responsibilities: Reliable operation of the electric grid Administer wholesale electricity markets Plan for future system needs 41

New Englands Electric Power Grid 6.5 million customer meters 350+ generators 8,000+ miles of high voltage transmission lines 6 local control centers 13 interconnections with approximately 5,000 MW capability to three neighboring systems : New York New Brunswick Hydro Quebec 32,000 MW of installed generating capacity Peak load: Summer: 28,130 MW (8/06) Winter: 22,818 MW (1/04) More than 450 participants in the marketplace Over $9 billion total market value 42 ISO and Local Control Centers 320 mi. 400 mi. 650 km ISO and Local Control Centers 520 km

43 Reliability Guides Regional Planning North American Electric Reliability Corporation Reliability Standards for the Bulk Power System in North America Northeast Power Coordinating Council Basic Criteria for the Design and Operation of Interconnected Power Systems ISO New England Reliability requirements for the regional power system Standards are used to ensure that the regional transmission system can reliably deliver power to consumers under a wide range of future system conditions. NPCC

System Expansion Planning and Operations System adequacy and security Resources develop/operate in amounts, location, and types when needed Transmission expansion/maintenance needed for reliability and economic performance Drivers are the amounts, locations, and characteristics of system loads and resources, transmission system configuration, and control system interactions Major considerations include: Future and current operability of the system Economic performance 44

Planning Is Complex Markets and bid strategies increase variability Market power issues Independent owners make decisions for capital investment Technology and physical changes 45 Unit dispatchAncillary services Unit commitmentNetwork flows Load pocketsDependency on generating units affect transfer limits ResourcesLoad serving entities Transmission owners Wind and solarEnvironmental constraints Distributed resourcesTransmission

Technical Studies Needed Transmission Planning studies identify system needs and show how a proposed project meets those needs Studies must address power flow and stability covering: Power flow performance, control and line utilization Reactive supply and voltage control requirements Dynamic and transient stability concerns and control system responses Reliable system performance must be demonstrated during normal and contingency conditions Short circuit availability and transient and harmonic performance must be satisfied 46

Growth of Smart Grid Technologies Smart grid technologies can affect energy use Examples: Load management and Flexible Alternating Current Transmission Systems Energy storage is getting increased focus as a benefit to system operations and to mitigate impact of variable resources Plug-in electric vehicles (EVs) can act as loads, sources, or dynamic voltage sources The large scale integration of EVs will affect the planning and operation of the electric power system grid 47

Effects of EV on the Transmission System Economics of EVs dependent on many factors which affect their penetration and use Capital and operating costs Performance and range Availability of charging stations Price of electricity and competing transportation fuels EVs can Mitigate or defer transmission system needs Advance transmission system improvements 48

EVs Change Load Shapes & Performance EV uses vary: Community type - urban/suburb/rural areas Trip purpose- commute/errands/pleasure Day weekdays/weekend/holiday Weather region driving patterns vary with hot and cold weather Roaming pattern charging station operation at different locations Understanding and predicting EV impacts on the grid depends on their use Further complicated by EVs acting as a load, real power source, and/or reactive power source 49

Summer vs. Winter Peak Demand 50

EVs Affect Transmission System Planning Load patterns and implementation of demand response Large EV penetration and use patterns affect markets, planning, and operations Load shapes Demand response Load aggregators Price signals Economic and environmental system performance EVs can provide ancillary services Balancing and regulation Operating reserves Voltage regulation and support 51

EVs Impacts on System Planning & Operations Variability of load amounts, locations, and characteristics affect transmission planning Thermal studies Voltage studies Stability studies Harmonics, transients and system protection Could facilitate integration of variable resources Observability and controllability are required Requires accurate projections of load Smart chips can provide frequency and voltage control 52

Demand-Resource Dispatch Zones 53

Need for New Tools and Modeling EVs introduce additional uncertainties to load levels, characteristics, and demand response EV modeling needs to be reflected in transmission need and solution studies of Resource adequacy Economic performance Environmental emissions Transmission system performance Forecasts of EVs and new study tools will be required EV locations and use patterns depend on consumer behavior End use models Stochastic models Charging and discharging 54

Summary EVs can act as a load, source, or dynamic voltage source Affect the system in different ways EVs introduce additional opportunities and uncertainties into system planning Resource planning Economic and environmental performance Transmission Planning Tools may be needed to forecast future EV penetration and use patterns 55

56 IEEE 2030.1 TF2 Draft Webinar Distribution System Impacts

By Dr. Spyros Skarvelis-Kazakos [email protected] 57

Generation System Impacts Overview Long-term planning effects Generation Capacity Energy Storage Regional Aspects Unit Dispatch Electricity Markets Mass Transit Operational effects Generator Efficiency Intermittent Stochastic Generation (Renewable) Micro-Generation Generation System Impacts Slide #58

Long-Term Planning Effects More Generation Capacity Base load plants: for demand increase Peaking plants: for unpredictable EV charging Energy Storage Large and small scale More energy storage needs for load balancing Regional Aspects EV regional distribution (urban/rural) Existing installations variability Generation System Impacts 59

Long-Term Planning Effects Unit Dispatch (depends on EV operation) Uncontrolled: Wider difference between demand valleys and peaks Inefficient operation at low loading for spinning reserve Controlled/V2G: More efficient dispatch Valley filling Generation System Impacts Slide #60

Long-Term Planning Effects Electricity Markets Impact depends on tariff incentives Flat rate: peak increase Dynamic tariff: valley filling Mass Transit Two contrasting effects: overnight depot charging mid-day fast charging Impact depends on the level of adoption Generation System Impacts 61

Operational Effects Generator Efficiency Uncontrolled: More balancing services > higher fuel consumption > more emissions Ramping of units, reducing efficiency and increasing fatigue Controlled/V2G: Load leveling > avoid part-loaded, inefficient operation Base-load generation more cost-effective Generation System Impacts Slide #62

Operational Effects Intermittent Stochastic Generation (Renewable) Controlled: avoid curtailment V2G: complement intermittent, non-controllable sources (e.g. wind) Micro-Generation Local micro-generator support Local load peak shaving Generation System Impacts 63

Generation: All-time Peak Generation System Impacts 67

Emissions: All-time Peak Generation System Impacts 68

Summary Need for more generation capacity (base & peak plants) Uncontrolled operation: reduced plant efficiency, increased cost and emissions Controlled/V2G operation: load leveling, intermittent/renewable/local generation support Total emissions due to generators may increase or decrease depending on the amount and pattern of EV use and mode of operation Generation System Impacts 66

67 IEEE 2030.1 TF2 Draft Webinar Generation System Impacts

ievc conference, greenville, sc march 8, 2012 ml chan, phd, ml consulting group (tf2 lead) jim hall,...

Documents

usa slide

ev impacts

ge energy slide

sectors impacts presentation

load evs

subgroup lead commentsinputs

ieee p2030

grid operations