ieee project 2010 uw-madison student chapter usb-powered led color organ meeting 1
TRANSCRIPT
Meeting Schedule
February 15, 18 Introduction, Eagle Tutorial Assignment
March 1, 4 Layout Review, Eagle Q&A, Start Layout
Individual Meetings (Weeks of March 15, 22) Board Layout Review, Make PCB Order
Week of April Soldering Practice, Board Assembly
April 28 (6:00pm), 31 (3:30pm) Board Assembly, Test, and Debug
Design Introduction
The color organ operates from USB power. You can choose which USB connector to have on
your board (A, B, or mini-B) Eight RGB LEDs are controlled by a
microcontroller A 3.5mm stereo jack provides the audio input
connection An optional USB UART allows the host
computer to communicate with the microprocessor
Eagle Assignment You’re welcome to work by yourself or with
someone else – it’s your call Before the next meeting
Download Eagle 5.7 from Cadsoft http://www.cadsoft.de/download.htm
Complete the SparkFun tutorials http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=108 http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=109
Also learn about and experiment with Create and name polygons Turn thermals on and off
Don’t worry about footprints.
Until we meet again…
EAGLE installs PDF manuals and a confusing tutorial in the doc subdirectory
Any questions?
Look for materials at http://eceserv0.ece.wisc.edu/~morrow/IEEE