iecd institute for entrepreneurship and career development ... · annexure v a – question bank...

84 | T r a i n t h e T r a i n e r s : T e a c h e r ’ s H a n d b o o k

Annexure V a – Question Bank – Certificate in Computer Basics

IECD

Institute for Entrepreneurship and Career Development

Bharathidasan University,Tiruchirappalli – 620 023

Certificate in Computer Basics

Course Code –CCB

UNIT I - INTRODUCTION TO COMPUTER

1. The first fully electronic computer was ____________.

a) UNIVAC b) ENIAC c) IBM 360 d) PDP11

2. ENIAC handled numbers in ______ form.

a) Binary b) Octal c) Decimal d) Hexadecimal

3. Father of computer is________.

a) Charles Babbage b) Mauchly c) Martyn d) Eckert

4. ______ constructed ENIAC computer.

a) Charles Babbage b) Mauchly& Eckert c) Martyn d) Charlie

5. ______ is an example of first generation computers.

a) UNIVAC b) IBM 140, CDC 1640 c) IBM 360, PDP11 d) Pentium Core i5

6. _________ is the basic component used in first generation computers.

a) Transistors b) Vaccum tubes c) ICs d) Microprocessor

7. In the year _____, first generation computer was established.

a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956

8. _____ is an example of second generation computers.

a) UNIVAC b) IBM 140, UNIVAC III, CDC 1640 c) IBM 360,PDP11 d) Pentium Core i5

9. _________ is the basic component used in Second generation computers.

a) Transistors b) Vacuum tubes c) Integrated Circuits d) Microprocessor

10. In the year _____, second generation computer was established.

a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956

11. ______ is an example of third generation computers.

a) UNIVAC b) IBM 140, CDC 1640 c) IBM 360&370, PDP11 d) Pentium Core i5

12. Multi programming was introduced in __________ generation.

a) First b) Second c) Third d) Fourth


13. In the year _____, third generation computer was established.

a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956

14. _________ is the basic component used in third generation computers.

a) Transistors b) Vacuum tubes c) Integrated Circuits d) Microprocessor

15. _________ is the basic component used in fourth generation computers.

a) Transistors b) Vacuum tubes c) ICs d) Microprocessor

16. Advantage of computer is ________.

a) Diligence b) Depends on electricity c) Do not think by itself d) Cannot learn by experiences

17. ______ is an example of fourth generation computers.

a) UNIVAC b) IBM 140, CDC 1640 c) IBM 360, PDP11 d) Pentium Core i5

18. In the year _____, fourth generation computer was established.

a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956

19. AI stands for __________, which the computer have in fifth generation computers.

a) Artificial instrument b) Active intelligence

c) Artificial intelligence d) Active Instrument

20. _________ is used in fifth generation computers.

a) Transistors b) Voice recognition c) Integrated Circuits d) Microprocessor

21. Voice or Pattern reorganization is part of _____________ generation.

a) Second b) Fourth c) Fifth d) Third

22. Expansion of VLSIC is __________.

a) Very Large Scale Integrated Circuits b) Very Large Scale Industry Circuits

c) Very Large Secure Integrated Circuits d) Very Large Secure Industry Circuits

23. System that are interconnected are called _________.

a) Internet b) Super Computer c) Server d) Mini computer

24. Mini Computers are also known as _________.

a)Mid rate Computers b) Mid range computers

c ) Low level System d) High range computers

25. Super computer consists of integrated ________.

a) Micro processors b) Macro processor c) Semi processor d) Micro server


Answers

Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans

1 B 2 C 3 A 4 B 5 A

6 B 7 D 8 B 9 A 10 B

11 C 12 C 13 C 14 C 15 D

16 A 17 D 18 A 19 C 20 B

21 C 22 A 23 A 24 B 25 A


Unit II - HARDWARE & SOFTWARE

1. A ______ is a mouse lying on its back.

a) Track ball b) Joystick c) Light pen d) Note taker

2. _______ is an input device that enables you to enter drawings and sketches into the computer and it

has 16 buttons.

a) Mouse b) Touch screen c) Digitized tablet d) Joystick

3. ___________ is an input device that can read text or illustrations printed on paper.

a) Mouse b) Scanner c) Digital camera d) Joystick

4. Images can be put into a computer using _____________.

a) Mouse b) MICR c) OCR d) Digital camera

5. ________ is a pointing device that enables the user to interact with the computer by touching the

screen.

a) Touch sensitive screen b) MICR c) OCR d) Digital camera

6. Expand OCR _______.

a) Optical Character Reader b) Optical Character Recognition

c) Optical Code Reader d) Optical Card Reader

7. ____________ is an input device which reads a magnetic strip on ATM, Credit card etc.

a) OMR b) OCR c) Magnetic Reader d) Bar code reader

8. ________ is a device that captures natural handwriting on a surface onto a computer.

a) Magnetic reader b) Touch pad c) OCR d) Notes taker

9. _________ serves as a voice input device.

a) Microphone b) Scanner c) Digital camera d) Joystick

10. ________ is used as a pointing device on some portable computers (Laptop).

a) Light pen b) Touch pad c)Joystick d) Notes taker

11. _________ is similar to mouse except you can directly move the pointer and select the objects on the

screen by pointing it with a pen.

a) Digitized tablet b) Joystick c) Touch screen d) Light pen

12. _______ Monitors are also called as RGB (Red Green Blue) monitors.

a) Monochrome b) Grey scale c) Colour d) RGB

13. ________ is a device that prints text or illustrations on paper (hard copy).

a) Monitor b) printer c) scanner d) Notes taker

14. __________ Printers are capable of printing entire line at a time.

a) Daisy wheel b) Thermal c) Laser d) Line


15. ________ Printer looks like a typewriter and is used in Railway Ticket Counter.

a) Dot Matrix b) Laser c) Plotters d) Inkjet

16. ________ Printers are used in Fax machines and calculator and the printed matters on the paper fade

after a week or two.

a) Laser b) Plotters c) Inkjet d) Thermal

17. ______ Printer produces very good quality of graphic images.


18. _______ controls the operation of input and output devices.

a) IO System b) IO Device c) Control Unit d) Memory Unit

19. ________ Printer use colour cartridges which combine Magenta, Yellow and Cyan links to create colour

tones.


20. _______ enables the computer to input, output and record sound.

a) Headphone b) Sound card c) scanner d) Microphone

21. ________ is the brain of the computer system.

a) ALU b) MU c) CPU d) CU

22. _______ is also called as VDU (Visual Display Unit).

a) Printers b) Monitors c) Plotters d) Scanners

23. ________ controls the entire system.

a) ALU b) MU c) CU d) Monitor

24. __________ Unit is used to store the data in the storage devices.


25. ___________ Unit performs logical operations and Arithmetic calculations.


Answers


1 A 2 C 3 B 4 D 5 A

6 B 7 C 8 D 9 A 10 B

11 D 12 C 13 B 14 D 15 A

16 D 17 A 18 A 19 C 20 B

21 C 22 B 23 C 24 B 25 A


UNIT III - OPERATING SYSTEM

1. Which command is used to list the files and directories in the root directory?

a) Dir b) List c) Display d) Open

2. Which command is is used to view all the files and directories in page wise?

a) dir/f b) dir/v c) dir/p d) dir/a

3. Which command is used to view all the files and directories in width wise?

a) dir/ww b) dir/w c) dir/p d) dir/a

4. Which command is used to view all the files and directories in the subdirectories of the current drive?

a) dir/s b) dir/c c) dir/sub d) dir/d

5. Which command is used to create a directory or sub directory?

a) DIR b) CHDIR (or) CD c) RMDIR d) MKDIR (or) MD

6. Which command is used to change the current directory?

a) CHDIR (or) CD b) DELDIR c) RMDIR d) MKDIR (or) MD

7. Which command is used to rename the file name?

a. Ren<new file name><old file name> b. Rename <old file name> <new file name>

b. Ren<old file name> <new file name> d. Change<old file name> <new file name>

8. Which command is used to copy the information’s typed on the screen?

a) copy <filename.extension> b) copy con<filename.extension>

c) type <filename.extension> d) type con <filename.extension>

9. Which command is used to view the contents of the file?

a) copy <filename.extension> b) copy con<filename.extension>

c) type <filename.extension> d) type con <filename.extension>

10. Which command is used to remove one or more specified files from the directory?

a) erase<filename.extension> b) del<filename.extension>

c) del dir <filename.extension> d) erase dir<filename.extension>

11. Which command is used to view the path?

a) view path b) path view c) path d) view

12. Which command is used to check the status on the disk, to repair on the errors in the directories or FAT

(File Allocation Table)?

a) chkdsk [drive name] b) checkdisk [drive name] c) stausdsk [drive name] d) stadsk [drive name]


13. Which command is used to create, change a volume label name for a disk?

a) labeldisk[drive name] b) label [drive name]

c) labeldsk [drive name] d) dsklab[drive name]

14. Type command is used to ________.

a) Write the content of the file b) View the content of the file

c) Type the contents of the file d) Read the content of the file

15. The commands are entered through the ________ in MSDOS.

a) Mouse b) Keyboard c) Monitor d) CPU

16. A file is called as group of _________.

a) Instruction b) Records c) Information d) Software

17. Find, Sort are _______ commands.

a) Internal b) External c) Menu d) None

18. Date, Time, Dir, Vol, Ver, Type, Copy etc. are_______ commands.

a) Internal b) External c) Menu d) None

19. CD command is used to ________.

a) open a CD disc b) rename CD disc c) change Directory d) copy Directory

20. Which command is used to display the time?

a) Date b) Time c) Clock d) CLS

21. Which command is used to rename the directory?

a) Copy b) Rename c) Change d) Modify

22. ____________ Command is used to delete the directory.

a) Exit b) Clear c) Remove d) Delete

23. .______& _________ are two wild card Option.

a) ! and # b) ? and * c) & and % d) @ and #

24. Which command is used for sorting the directory by name (alphabetical order wise)?

a) Dir/on b) Dir / od c) path d) view

25. Which command is used for sorting the directory in year wise?

a) Dir/on b) Dir / od c) path d) view


Answers


1 A 2 C 3 B 4 A 5 D

6 A 7 C 8 B 9 C 10 B

11 C 12 A 13 B 14 B 15 B

16 C 17 B 18 A 19 C 20 B

21 B 22 D 23 B 24 A 25 B


UNIT IV - INTRODUCTION TO LOGO

1. LOGO provides a primitive called ________

a) CR b) PR c) TR d) DR

2. Shortcut to make the turtle visible is ________.

a) HT b) ST c) RT d) FD

3. ________ Keyword is used to find the product of two numbers.

a) PR b) Multiply c) Product d) Asterisk

4. Which keyword is used to find the remainder value?

a) Remain b) Remainder c) Product d) Round

5. Odd man out _____.

a) ST b) CT c) TT d) RT

6. ______ is an order given to the computer to perform some task.

a) Input b) Command c) Home d) Halt

7. The most important control (box) within the commander is ________.

a) Input b) Trace c) Home d) Halt

8. _________ Command is used to erase the entire drawing in the graphics area and bring the turtle to the

home position.

a) HT b) CT c) RT d) CS

9. _________ Command is used to bring the turtle to the home position.

a) Step b) Trace c) Home d) Halt

10. The command used to turn the turtle towards right from its position is ________.

a) HT b) ST c) RT d) LT

11. The _______ button executes what is in the Input Box and is also pushed when you hit enter.

a) Step b) Trace c) Halt d) Execute

12. The _______ button immediately stops LOGO from processing further.

a) Status b) Trace c) Halt d) Execute

13. ________ Button is like a clear screen.

a) Reset b) Trace c) Halt d) Execute

14. This button pops up a status window telling you what LOGO is up to ________.

a) Status b) Trace c) Halt d) Execute

15. The command used to turn the turtle towards left from its position is _________.

a) HT b) ST c) RT d) LT


16. ________ will record all output including what you type into the Input box.

a) Input Box b) Output/Command-Recall List Box c) Execute Button d) Step Button

17. The ______ button turns on single stepping for debugging your programs.

a) Pause b) Step c) Status d) Trace

18. The ______ button stops LOGO so that you can examine variables, make changes or whatever.

a) Pause b) Step c) Status d) Trace

19. _____ Command is used to make a program command, go to the edit mode after restarting the system.

a) Execute b) Edall c) Step d) Reset

20. MSW LOGO is a ______________ language.

a) Low level b) Assembly c) Interpreted d) High Level

21. This allows you to select the work area to be printed or saved.

a) Bitmap Save command b) Bitmap Active Area command

c) Bitmap Print command d) Bitmap Load command

22. ________ command allows you to select the screen colour.

a) Set Pen Colour b) Set Label Font Colour c) Set Flood Colour d) Set Screen Colour

23. _________ command allows you to select the size of the pen in which the turtle will draw.

a) Set Pen Size b) Set Label Font Colour c) Set Flood Colour d) Set Screen Colour

24. ________ Keyword returns a positive square root.

a) Round b) Multiply c) Product d) SQRT

25. The keyword used to add two numbers is______.

a) ADD b) SUM c) PLUS d) SUB

Answers


1 B 2 B 3 C 4 B 5 C

6 B 7 A 8 D 9 C 10 C

11 D 12 C 13 A 14 A 15 D

16 B 17 B 18 A 19 B 20 C

21 B 22 D 23 A 24 D 25 B


UNIT V - LOGO-ADVANCE COMMANDS

1. PC command is used for _______

a) Personal Computer b) Pen colour c) Pen column d) None

2. PPT is a ______.

a) Personal paint b) Pen Purple c) Pen Paint d) None

3. [000 000 000] is equivalent to ________.

a) Black b) Blue c) White d) Pink

4. Syntax for display the current system date is ______.

a) PD Time b) PR Month c) Date d) PR Date

5. ________ command is used to convert all uppercase letters in a text string to lowercase.

a) Shift+F3 b) F3 c) Lowercase d) Logo Lower

6. ______ command is used to fill the pen’s colour on any closed shape.

a) Back b) Filter c) Fill d) Restore

7. Syntax for display the current system time is ______

a) PD Time b) PR Time c) Date d) Time

8. _______ command is used to convert all lowercase letters in a text string to uppercase.

a) Shift+F3 b) PR Uppercase c) Date d) PR Lower

9. ________ command is used to set the pen’s position to UP, without changing its mode.

a) PD b) PE c) PPT d) PU

10. _______ command is used to set the pen’s position to down, without changing its mode.


11. ________ command is used to set the pen’s position to down and mode to ERASE.


12. ________ command is used to set the pen’s position to down and mode to PAINT.


13. [255 2555 255] is equivalent to _________.


14. ________ command is used to set the pen to normal use.


15. ________ command is used to set the required colour on the pen.

a) SET PC b) SET FC c) SETSC d) PU

16.________ command is used to set the Background/ graphics area in color of your choice.



17. [255 000 000] is equivalent to ________.

a) Black b) Blue c) White d) Red

18. ________ command is used to set the screen background.


19. ______ command is used to exit from LOGO & returns to the operating system.

a) Stop b) BYE c) EXIT d) END

20. [000 255 000] is equivalent to ________.

a) Black b) Blue c) White d) Green

21. [000 000 255] is equivalent to _________.


22.__________ commands exit from LOGO .

a. end b. last c. exit d. bye

23. PC commands is used for _______.

a. personal computer b. pencolor c. pencoloumn d. none

24. PPT is a _________.

a. Personal paint b. penpaint c. penturtle d. none

25. Which one is used to sets the pens position to down?

a. PENUP b. PENDOWN c. PENERASE d. PENPAINT

Answers


1 B 2 C 3 A 4 D 5 C

6 C 7 D 8 B 9 D 10 A

11 B 12 C 13 C 14 C 15 A

16 B 17 D 18 C 19 B 20 D

21 B 22 C 23 B 24 B 25 B


Annexure V b – Question Bank – Certificate in Office Automation

IECD



Certificate in Office Automation

Course Code –COA

UNIT I - OFFICE AUTOMATION

1. The term ___________ refers to all software programs.

a) Process automation b) Office automation c) Both a & b d) None of the above

2. ____________ is a set of instructions.

a) Hardware b) Software c) Application d) All of the above

3. A ____________ is an organized list of instructions that when executed, causes the computer to behave

in a predetermined manner.

a) Hardware b) Software c) Application d) Program

4. Which of the following is not a programming language?

a) C b) C++ c) MS Office d) Java

5. Odd man out.

a) BASIC b) FORTRAN c) COBAL d) MS Office

6. Low level languages are called ____________.

a) Human language b) Machine language c) High language d) Assembly language

7. ___________ programs are translated into machine language by a program called an assembler.

a) Human language b) Machine language c) High language d) Assembly language

8. Low level languages are closer to the _____________.

a) Human language b) Machine language c) Computer language d) Assembly language

9. High level languages are closer to the ____________.

a) Human language b) Machine language c) Computer language d) Assembly language

10. _____________ is performed by compilers, interpreters and assemblers.

a) Instruct b) Translation c) Both a & b d) None of the above

11. There are _________ types of software.

a) 3 b) 4 c) 2 d) 5

12. ___________ is a general term for the various kinds of programs.



13. The term ______________ describes the physical aspects of computers and related devices.


14._____________ software is designed to help the user to perform singular or multiple related

specific tasks.

a) System b) Software c) Application d) Program

15. Example for application software____________.

a) Word processors b) Spreadsheets c) Both a & b d) None of the above

16. ___________ software is designed to operate the computer hardware.

a) System b) Software c) Application d) Program

17. ____________ provides a platform for running application software.

a) Application software b) System software c) Both a & b d) None of the above

18. ____________ manages and controls computer hardware so that application software’s can perform.


19. Example for System software is ___________.

a) Linux b) Microsoft windows c) Both a & b d) None of the above

20. ___________ helps to run the computer hardware and computer system.


21. ___________ includes operating system, device drivers, tools, servers etc.,


22. ___________ is the process of writing, testing and debugging.

a) Programming language b) Computer programming c) Application d) Software

23. A ____________ is a computer language that programmers use to develop applications.

a) Programming language b) Computer programming c) Application d) Software

24. First generation computers used on ___________.

a) Machine language b) Assembly language c) Human language d) None of the above

25. Assembly language was used in _________generation.

a) First b) Second c) Third d) Fourth

https://www.webopedia.com/TERM/M/machine_language.html

https://webopedia.com/TERM/a/assembly.html


Answers


1 B 2 B 3 D 4 C 5 D

6 D 7 D 8 C 9 A 10 B

11 C 12 B 13 A 14 C 15 C

16 A 17 B 18 B 19 C 20 B

21 B 22 B 23 A 24 A 25 B


UNIT II - INTRODUCTION TO MS- WORD

1. To leave a space between two characters _______________.

a) Delete b) Backspace c) Space bar d) Tab

2. Startall programs _____________._ MS Word 2003.

a) Accessories b) MS Office c) My documents d) My computer

3. To open a new file, ______________.

a) File open b) file new c) Edit new d) edit open

4. The file extension for MS Word is ___________.

a) .dot b) .doc c) .dom d) .txt

5. ____________ enables to quickly move to any location in your document.

a) Document map b) Direction c) Copy file d) Cut file

6. __________ is used to insert page number for each page.

a) Page break b) Page number c) Page border d) None of the above

7. ____________ is used to place a link to any document stored on your computer.

a) Hyperlink b) Hypertext c) Mail merge d) None of the above

8. ___________ key is used to close the window.

a) Ctrl+ F4 b) alt+ f4 c) ctrl+ s d) ctrl+ v

9. There are ___________ types of letter cases.

a) 3 b) 4 c) 5 d) 6

10. __________ is used to capitalize the first letter of the first word in the selected sentences.

a) Sentence case b) Upper case c) Lower case d) Toggle case

11.____________ changes all selected text to lowercase letters.


12. ____________ changes all selected text to uppercase letters.

a) Sentence case b) Upper case c) Lower case d) Title case

13. ___________ is used to capitalize the first letters of each word in the selection.

a) Sentence case b) Upper case c) Lower case d) Title case

14. ____________ is used to change all uppercase to lowercase and lowercase to uppercase in the

selection.


15. Way to insert page number ____________.

a) Insert page number b) File page number c) Edit page number d) View page number


16. ____________ allows you to set the amount of space between the lines.

a) Tab space b) Intend space c) Line spacing d) All of the above

17. ___________ allows you to change the typing direction of your text from left to right or right to left.

a) Navigation b) Down arrow c) Text orientation d) None of the above

18. Beginning of the line ____________.

a) Home b) End c) Ctrl+ home d) Ctrl+ end

19. ____________ picture auto shapes.

a) File b) View c) Insert d) Edit

20. To remove space in left of the cursor ______________ key.

a) Enter b) Backspace c) Delete d) End

21. Shortcut key for cut ______________.

a) Ctrl+ v b) Ctrl+ s c) Ctrl+ p d) Ctrl+ x

22. Shortcut key for paste _____________.

a) Ctrl+ v b) Ctrl+ z c) Ctrl+ c d) Ctrl+ o

23. Shortcut key for save ______________.

a) Ctrl+ v b) Ctrl+ s c) Ctrl+ p d) Ctrl+ y

24. Shortcut key for copy _____________.

a) Ctrl+ v b) Ctrl+ c c) Ctrl+ p d) Ctrl+ x

25. Shortcut key for print ___________.

a) Ctrl+ v b) Ctrl+ s c) Ctrl+ p d) Ctrl+ x

Answers


1 C 2 B 3 B 4 B 5 A

6 B 7 A 8 B 9 C 10 A

11 C 12 B 13 D 14 D 15 A

16 C 17 C 18 A 19 C 20 B

21 D 22 A 23 B 24 B 25 C


UNIT III - INTRODUCTION TO MS-EXCEL

1. ___________ is a spread sheet program.

a) MS- Excel b) MS- word c) MS- access d) None of the above

2. Excel is a ______________ .

a) Notebook b) Notepad c) Workbook d) WordPad

3. Excel can hold many ______________.

a) Notebook b) Notepad c) Worksheets d) None of the above

4. The worksheet is a grid of _______________.

a) Table & matrix b) Columns & rows c) Rows& tables d) All of the above

5. In worksheets, the column& rows are designated by ___________________

a) Letters& numbers b) Special character & number c) Numbers & letters d) None of the

above

6. Which of the following components is MS-Excel.____________.

a) Electronic spread sheet b) Database management c) Generation of chart d) All of the

above

7. Workbook provides _________ worksheets.

a) 4 b) 2 c) 3 d) 5

8. Excel has the facility to increase _____________.

a) Number of workbook b) Number of note books c) Number of notepad d) Number of worksheets

9. Each sheet provides ____________ columns and ____________ rows.

a) 256, 65000 b) 200, 65536 c) 256, 65536 d) 250, 65100

10. Start all programs MS-Office ____________.

a) Notepad b) WordPad c) MS- Dos d) MS- Excel

11. Which displays the document name followed by a program name? ____________.

a) Title bar b) Word pad c) Scroll bar d) All of the above

12. The ____________ is directly below the title bar.

a) Status bar b) Scroll bar c) Tool bar d) Menu bar

13. Which is the default file name of excel?

a) Note 1 b) Book 1 c) Excel 1 d) None of the above

14. Click ____________ to create a new blank worksheet.

a) New b) Save c) Open d) Save as


15. Click ___________ option to save the current spread sheet.

a) Open b) New c) Exit d) Save

16. Click ___________ option to close the excel window.

a) Open b) New c) Exit d) Save

17. Click ______________ to open a previously saved spread sheet.

a) New b) Save c) Open d) Save as

18. _____________ option is used to print the document.

a) Open b) Print preview c) Print d) Copy

19. ___________ is used to view the potential print of the document.

a) Print b) Print layout c) Print preview d) All of the above

20. ____________ option is used to copy the current selection to the clipboard.

a) Cut b) Copy c) Paste d) Undo

21. Shortcut key for copy _____________.

a) Ctrl+ o b) Ctrl+ c c) Ctrl+ n d) Ctrl+ s

22. ____________ allows a drop-down menu of available mathematical operations to perform.

a) Submenu b) Auto sum c) Chart wizard d) None of the above

23. ____________ is used to sort the current selection in ascending order.

a) Filter b) Sorting c) Sort ascending d) All of the above

24. ____________ is a used to combine two selected cells into one new cell.

a) Wrap text b) Center c) Merge& center d) Align right

25. This symbol represents the _____________.

a) Table b) Border c) Cell d) None of the above

Answers


1 A 2 C 3 C 4 B 5 A

6 D 7 C 8 D 9 C 10 D

11 A 12 D 13 B 14 A 15 D

16 C 17 C 18 C 19 C 20 B

21 B 22 B 23 C 24 C 25 B


UNIT IV - FORMULAS AND FUNCTIONS

1. The unique feature of a spread sheet program is _______________.

a) Word b) Excel c) Power point d) Access

2. ______________ allows you to create mathematical formulas& execute functions.


3. Every formula must begin with an ______________ sign.

a) = b) + c) % d) /

4. Formula for linking worksheet is ____________.

a) A1+ sheet2 b) =A1+ sheet2 c) =A1+ sheet2! A2 d) None of the above

5. Addition, multiplication, subtraction& division are ___________________calculation.

a) Logical b) Condition c) Relational d) Mathematical

6. The ____________ icon on the standard toolbar automatically adds a column of numbers.

a) Sum b) Auto sum c) Merge d) Function

7. ___________ symbol used for adding a two number.

a) * b) = c) + d) %

8. ____________ symbol used for multiplication.

a) * b) = c) + d) %

9. _____________ symbol used for subtraction.

a) * b) ^ c) - d) +

10. ____________ symbol used for exponential.

a) * b) ^ c) - d) +

11. When entering a mathematical formula, precede the formula with a ____________ sign.

a) Plus b) Minus c) Equal d) None of the above

12. You can add ______________ to separate thousands.

a) Commas b) Semicolon c) Colon d) None of the above

13. Function is ____________ formulas.

a) Pre- defined b) User- defined c) Both a& b d) None of the above

14. ____________ allow you to quickly& easily find an average, highest number etc.

a) Functions b) Format c) Both a& b d) None of the above

15. Which of the following is not a function?

a) TODAY b) NOW c) IF d) ADD


16. In ___________, you can execute a basic descending or ascending sort based on one column.


17. Sort ascending means ____________ order.

a) A- Z b) Z- A c) Both a& b d) None of the above

18. Sort descending means ______________ order.

a) A- Z b) Z- A c) Both a& b d) None of the above

19. Select ____________ from the menu bar.

a) Viewsort b) Data sort c) Edit sort d) None of the above

20. Portrait& landscape are under the ___________ menu.

a) File b) Edit c) Page layout d) None of the above

21. The size of the worksheet on the page can also be formatted under the ____________ title.

a) Scaling b) Page break c) Page tab d) None of the above

22. To set ____________ within the worksheet, select the row you want to appear.

a) Page break b) Page tab c) Page setup d) All of the above

23. Choose ___________ from the menu bar.

a) Insert page break b) Insert page setup c) Page break Insert d) None of the

above

24. To view page setup select ___________ from the menu bar.

a) Page setup b) Edit page setup c) File page setup d) View page setup

25. _________ option includes changing the font, size & style.

a) Format text b) Edit text c) Delete d) Save

Answers


1 B 2 B 3 A 4 C 5 D

6 B 7 C 8 A 9 C 10 A

11 C 12 A 13 A 14 A 15 D

16 B 17 A 18 B 19 B 20 C

21 A 22 A 23 A 24 C 25 A


UNIT V - INTRODUCTION TO MS POWER POINT

1. ____________ is a graphical presentation program.

a) Word b) Excel c) Access d) Power point

2. _________ is the top of the power point window.

a) Menu bar b) Task bar c) Title bar d) Tool bar

3. ___________ includes file, edit, view& etc.

a) Menu bar b) Task bar c) Title bar d) Tool bar

4. ___________ used to create a new presentation.

a) Ctrl+ o b) Ctrl+ c c) Ctrl+ n d) Ctrl+ v

5. ____________ wizard gives you a set of exiting slides & designs.

a) Auto content b) Existing c) Design d) Slides

6. _____________ used to open the existing file.

a) Ctrl+ o b) Ctrl+ c c) Ctrl+ n d) Ctrl+ v

7. File extension to save power point presentation is ______________.

a) .ppt b) .doc c) .jpg d) .txt

8. Click the ____________ button on the formatting toolbar to open a new slide.

a) Edit slide b) New slide c) Delete slide d) None of the above

9. ___________ allows you to select the size of the slides.

a) Page border b) Page number c) Page setup d) None of the above

10. ___________ used to set portrait or landscape mode .

a) Page border b) Page number c) Page setup d) Page orientation

11. There are ___________ different ways to view your presentation in power point.

a) 3 b) 5 c) 4 d) 6

12. ____________ view displays a single slide as it appears in the presentation.

a) Slide sorter b) Normal c) Notes page d) Slide show

13. ____________ can be added to the bottom of the normal view window.

a) Slide sorter b) Normal c) Notes page d) Speaker notes

14. ____________ view shows a miniature version of all your slides.


15. In _________ view you can reorder the slides by dragging and dropping.

a) Slide sorter b) Normal c) Notes page d) Speaker notes

16. You can hide the slides in _____________ view.

a) Notes page b) Slide show c) Normal d) Slide sorter


17. _____________ view allows the speaker to create notes to use during a presentation.


18. ____________ view will displays the slides in a presentation with sound and animation.


19. __________ gives you a mini-slide view of your presentation.


20. Click on the desired slide to select and press the _______________ key to delete.

a) Delete b) Backspace c) Insert d) None of the above

21. ___________ allows you to view and run your presentation in the full-screen mode.


22. Press ____________key to run the presentation.

a) F4 b) F6 c) F5 d) F7

23. Press _____________ key to move to the first slide.

a) End b) Home c) PgUp d) Pgdn

24. Press _____________ key for move to the first slide.

a) End b) Home c) PgUp d) Pgdn

25. Press ___________ key to stop the slide show.

a) End b) Home c) Enter d) Esc

Answers


1 D 2 C 3 A 4 C 5 A

6 A 7 A 8 B 9 C 10 D

11 C 12 B 13 D 14 A 15 A

16 D 17 A 18 D 19 D 20 A

21 D 22 C 23 B 24 A 25 D


Annexure V c – Question Bank – Certificate in Programming Techniques

IECD



Certificate in Programming Techniques

Course Code –CPT

UNIT I - NETWORKS

1. A Computer _______________consists of a collection of computer and other equipment.

a. Network b. Modem c. ISP d. Web site

2. A computer network is usually made for more than __________ computers.

a. one b. two c. three d. zero

3. There are _________ types of network configuration.

a. one b. two c. three d. many

4. ____________network is implemented for less than ten computers.

a. Client/Server b. Peer to peer c. MAN d. WAN

5. Which network is suitable for larger networks?

a. Peer to Peer b. LAN c. Client/Server d. None of these

6. Files such as __________ can be shared across the network.

a. Word Processing b. Spreadsheet c. Images d. All of the above

7. Which device can be connected in the network?

a. Printers b. Scanners c. Fax d. All of the above

8. ___________acts as the storage location for files and applications shared on the network.

a. Client b. Server c. Memory Card d. None of the above

9. Usually, ___________ performance is higher than the average computers.


10. _________ controls the network access of the client computers.


11. Which one is not belong to the characteristics of computer network?

a. We can play CD music from one computer while sitting on another computer

b. We can connect printer to one computer and let the other computer print that printer

c. We can connect Fax and scanner d. All of the above

12. _________ network is used only for the small physical area.

a. WAN b. LAN c. MAN d. All the above


13. LAN stands for __________.

a. Local Area Network b. Land Area Network c. Large Area Network d. Large And Network

14. LAN can be classified into __________ types.

a. one b. two c. three d. many

15.___________ and __________ are two types of Local Area Network.

a. Wired and Wireless b. Wired and Aerial b. Wired and Cable d. Blue Tooth and WIFI

16. MAN stands for ____________.

a. Main Area Network b. Mini Area Network

c. Metropolitan Area Network d. Microsoft Network

17. Routers, switches and hubs are connected to create a ___________


18. To create a Metropolitan Area Network, ___________ to be connected.

a. Routers b. Switches c. Hubs d. All of these

19. _____________ can span up to 50kms.

a. CAN b. MAN c. PAN d. LAN

20. MAN can span upto ______kms

a. 20 b. 30 c. 40 d. 50

21. WAN stands for ___________.

a. Wide Area Network b. Wireless Network c. Whole Area Network d. Wide Angle Network

22. A _________ is a computer network that covers a broad area.


23. PAN stands for ___________.

a. Personal Area Network b. Permanent Area Network c. Personnel Area Network d. Print Area

Network

24. CAN stands for __________.

a. Campus area network b. Crime Area Network c. Campus and network d. City network

25. The largest and most well-known example of the WAN is the ___________.

a. Computer b. Blog c. Internet d. Firewall


Answers


1 A 2 B 3 B 4 B 5 C

6 D 7 D 8 B 9 B 10 B

11 D 12 B 13 A 14 B 15 A

16 C 17 C 18 D 19 B 20 D

21 A 22 A 23 A 24 A 25 C


UNIT II - MSDOS & BASIC PROGRAMMING

1. An ______ is a computer program that manages the resources of a Computer.

a. Operating System b. CPU c. Hardware d. None

2. OS stands for __________.

a. Operating System b. Operation Success c. Oracle System d. Ordinary System

3. ________ is software that control and manage the hardware.


4. _________ acts as basic software of the computer machine.


5. _________ is the most well Known operating system.

a. BASIC b. MS-DOS c. Unix d. Linux

6. MS-DOS is the acronym for __________.

a. Micro soft Desk Operating System b. Microsoft Disk Operating System

c. Micro soft Device Operating System d. Mini system device operating system

7. MS DOS was created in __________.

a. 1991 b. 1981 c. 1998 d. 2001

8. Latest version of MS DOS is _________.

a. 2.0 b. 3.0 c. 7.0 d. 2.7

9. MS DOS is ___________.

a. Case sensitive b. Not case sensitive c. Context sensitive d. None of the above

10. Which is not a DOS command?

a. Date b. Time c. Clear d. cls

11. _________ command redirects disk operation on one drive to another.

a. Assign b. Append c. Copy d. Erase

12. _________ command does not work with format, diskcopy, backup etc.


13. __________ command is used to clear the screen of all previous text.

a. Assign b. clear c. cls d. Erase

14. ___________ command copies files from one location to another location.


15. ___________ command is used to remove files from the disk.



16. ___________ command is used to access the information and help file from MS DOS prompt.

a. Help b. Append c. Copy d. Erase

17. __________ command is used to display and change the current date of the computer

a. Assign b. Date c. Copy d. Erase

18. __________ command is used to view and edit the current time

a. Date b. time c. change d. cd

19. __________ command is used to move files or directories from one folder to another.

a. Assign b. move c. Copy d. Erase

20. __________ command allows the user to view a listing of files and folders in an easy to read listing.

a. Tree b. Append c. Copy d. Erase

21. Expansion of BASIC __________.

a. Beginners All Purpose Symbolic Instruction Code

b. Beginners All Purpose Symbol Instruction Code

c. Beginners For Purpose Symbolic Instruction Code

d. All of these

22. BASIC was developed in ___________.

a. Darthmouth College, USA b. Darthmouth College, UK

c. Dental College, USA d. America

23. BASIC was developed by ___________.

a. John G Kemeny and Thomas E. Kurtz b. John Thomas and E. Kurtz

c. John G Kemeny and Edison d. John Alpert and Thomas E. Kurtz

24. BASIC was developed in ___________.

a. 1994 b. 1984 c. 1964 d. 2011

25. A Version of BASIC is ___________.

a. BASICA b. QBASIC c. GWBASIC d. All of the above

Answers


1 A 2 A 3 A 4 B 5 B

6 B 7 B 8 C 9 B 10 C

11 A 12 A 13 C 14 C 15 D

16 A 17 B 18 B 19 B 20 A

21 A 22 A 23 A 24 C 25 D


UNIT III - DATABASE

1.__________ is a collection of facts such as values or measurements.

a. Data b. Field c. Text d. Record

2. A __________ is a computerized record keeping systems.

a. Spread Sheet b. Word Processor c. Data Base d. All of the above

3. Expansion of DBMS is ___________.

a. Data Base Management System b. Data Base Manage System

c. Data Base Managing System d. Data Base Managed System

4. ___________ is a collection of programs that enables you to store, modify and extract information from a

database.

a. Spread Sheet b. Word Processor c. Data Base d. All

5. Choose the examples for applications of database______.

a. Computerized library system b. ATM c. Flight Reservation System d. All of the above

6. ___________ field is used to define the multi lined text.

a. Date b. Logic c. Numeric d. Memo

7. Odd Man Out .

a. Soft BASE b. Oracle c. MS-Access d. Paint

8. Database is a collection of _________.

a. Word b. Letter c. Records d. folder

9. Start All Programs________ MS-Access

a. Accessories b. Ms office c. My computer d. My document

10. __________ is defined as a smallest unit in the database.

a. Row b. Column c. Field d. Record

11. __________ categories of fields are available in database.

a. 6 b. 4 c. 5 d. 8

12. _________ can be defined to retrieve information from the tables.

a. Report b. Forms c. Queries d. Tables

13. The set of related fields are called __________.

a. Field b.Record c. Table d. All of the above

14. __________ is the collection of logically related records.

a. Database b. Row c. Field d. Record

15. Using __________ files can be retrieved easily and effectively.

a. DBMS b. DBM c. IBM d. None of the above


16. Choose the DBMS package_________.

a. dBASE III Plus b. FoxBASE c. Foxpro d. All of the above

17. Choose the purpose of Database system _________.

a. Integrity Problems b. Security Problem c. Data isolation d. All of the above

18. There are ___________ types of data models.

a. 2 b. 3 c. 4 d. Many

19. _________ and _________ are two types of data models.

a. Object based, record based b. Object based, field based

c. Record based, field based d. Field based , table based

20. __________ is the collection of records that identify categories.

a. Table b. Row c. Field d. Record

21. Each __________ contains a unique instance of data.


22. __________ is a formal description of the table, columns, domains and constraints.

a. Meta Variable b. Data Meta c. Meta Data d. None of the above

23. __________ is the MsOffice Package.

a. SQL b. MSAccess c. Foxpro d. Oracle

24. Tables, Queries, Forms and Reports are the components of ____________.

a. Excel b. Word c. Power-Point d. Access

25. ___________ is a single characteristic or attribute of a person, place, object or idea.


Answers


1 A 2 C 3 A 4 C 5 D

6 D 7 D 8 C 9 B 10 C

11 C 12 C 13 B 14 A 15 A

16 D 17 D 18 A 19 A 20 A

21 B 22 C 23 B 24 D 25 C


UNIT IV - MS ACCESS

1. __________ provides a quick and easy way to modify and insert records into your database.

a. Query b. Table c. Report d. Form

2. MS Access does a very good job of creating a form using _________.

a. Wizard b. Design view c. Data sheet view d. None

3. Access will allow you to add, modify, and delete records in __________ view.

a. Report b. Edit c. Forms d. None

4. To delete a record with a Form, display the record in Form View and select the __________ command in

the Edit Menu.

a. Delete b. Cascade c. Delete Record d. Record Delete

5. Delete Record command is in __________ menu.

a. File b. Edit c. View d. Insert

6. __________ wildcard character is used to match any single numeric character.

a. * b. [ ] c. ? d. #

7. # - is used to match any single __________ character.

a. Numeric b. String c. Both a & b d. All

8. What is the purpose of [ ] this wild card character?

a. Match any single alphabetic character b. Match any single character within the brackets

c. Both a & b d. None of the above

9.__________ wild card option is used to match any character not within brackets.

a. * b. [ ] c. ! d. # .

10. __________ wild card option is used to match any character within brackets.

a. * b. [ ] c. ! d. # .

11. __________ wild card option is used to match any single alphabetic character.

a. ? b. [ ] c. ! d. # .

12. __________ wild card option is used to match any number of characters.

a. * b. [ ] c. ! d. # .

13. ___________ wild card option is used to match any one of a range of characters.

a. - b. [ ] c. ! d. # .

14. MS Access allows you to print your form of __________.

a. One record b. A range of records c. All the records d. All of the above

15. __________ command is used to print the selected records.

a. File Print b. Edit print c. Format print d. Table print


16. __________ are the statements used to retrieve information.

a. Queries b. Forms c. Data d. Table

17. How many types of Query is available in MS Access?

a. 1 b. 2 c. 3 d. 4

18. A ___________ query gathers, collates and presents information in usable forms.

a. Action b. Select c. Access Query d. None

19.__________ and ___________ are the two types of queries.

a. Action , Query b. Select , Action c. Select ,Query d. Select , Uniform

20. In contrast to a filter, a query is ___________.

a. User friendly b. reusable c. not reusable d. None

21.___________ Query makes changes in specified records of an existing table.

a. Action b. Select c. Access Query d. None

22. ___________ allows the selection criteria and/or sorting instructions to be saved and reused

a. Forms b. Reports c. Table d. Query

23. – What is the name of this icon?

a. Forms b. Reports c. Table d. Query

24. We can view the records that match particular criteria by creating a query that uses a __________.

a. Pattern Match b. Match Pattern c. Match query d. All of the above

25. __________ wild card characters allow you to create much more flexible patterns.

a. * b. ? c. # d. All of the above

Answers


1 D 2 A 3 C 4 C 5 B

6 D 7 A 8 B 9 C 10 B

11 A 12 A 13 A 14 D 15 A

16 A 17 B 18 B 19 B 20 B

21 A 22 D 23 D 24 A 25 D


UNIT V - INTROCUCTION TO VISUAL BASIC & HTML

1. Visual Basic evolves from ___________.

a. BASIC b. FORTRAN c. COBOL d. C

2. BASIC syntax is similar to __________ language.

a. BASIC b. FORTRAN c. COBOL d. C

3. Acronym of FORTRAN is ___________.

a. Formula Translation b. Format Translation c. For Transpose d. None

4. BASIC was used primarily for ___________ computing.

a. Calculation b. Interactive c. Expensive d. Exclusive

5. FORTRAN was used in ____________ environment.

a. Unit wise b. Batch – processing c. Unit Processing d. None

6. __________ introduced GW-Basic with its DOS.

a. Microsoft b. Sun microsystem c. DOS d. None

7. To improve execution speed, BASIC __________ were introduced

a. Compiler b. Interpreter c. Inverter d. None

8. A version of BASIC compiler by Microsoft is _______

a. BASIC b. Quick Basic c. FORTRAN d. None

9. __________ is a kind of language processor that translates a source program into machine language.

a. Compiler b. Interpreter c. Inverter d. None

10. __________ is fairly closed to the machine language.

a. Compiler b. Interpreter c. Pseudo-code d. None

11. Quick Basic is a ___________ oriented language.

a. Machine b. Compiler c. Procedure d. None

12. GUI stands for ___________.

a. Graphical Unit Interchange b. Graphic User Interface

c. Graphic User Interpreter d. None of the above

13. Visual Basic (VB) arrived in the year ____________.

a. 1991 b. 1992 c. 2001 d. 2005

14. The first version of VB had _____________ editions

a. 2 b. 3 c. 4 d. Many

15. Earlier version of VB were written for ___________ bit Operating System.

a. 2 b. 4 c. 8 d. 16


16. ADO stands for ___________.

a. Active Digital Object b. ActiveX Data Object c. Acting data object d. None

17. VB.NET was introduced in __________ year.

a. 1991 b. 1992 c. 2001 d. 2005

18. ______ provides convenient intelligence hints to the developer.

a. VB.NET 2008 b. VB.NET 2001 c. VB.NET 2005 d. None

19. Visual Basic can able to create an __________ file

a. Source b. Target c. Execution d. None

20. Microsoft released Visual Studio.NET in ___________.

a. 2001 b. 2003 c. 2002 d. 2005

21.Visual Basic version 2 was introduced in ___________.

a. 1992 b. 1993 c. 1996 d. 1997

22.Visual Basic version 3 was introduced in ___________.

a. 1992 b. 1993 c. 1996 d. 1997

23. Visual Basic version 4 was introduced in ___________.

a. 1992 b. 1993 c. 1996 d. 1997

24. Visual Basic version 5 was introduced in _____________.

a. 1992 b. 1993 c. 1996 d. 1997

25. Visual Basic version 6 was introduced in ____________.

a. 1998 b. 1993 c. 1996 d. 1997

26. Visual Basic .NET was introduced in _____________.

a. 1992 b. 2001 c. 1996 d. 1997

Answers


1 A 2 B 3 A 4 B 5 B

6 A 7 A 8 B 9 A 10 C

11 C 12 B 13 A 14 A 15 D

16 B 17 C 18 A 19 C 20 C

21 A 22 B 23 C 24 D 25 A 26 B


Annexure V d – Question Bank – Certificate in Programming

IECD



Certificate in C Programming

Course Code –CCP

UNIT I - INTRODUCTION TO C

1. A group of programs developed for certain purpose are referred as ________.

a. Program b. Variable c. Software d. Data

2. The electronic components of the computers are known as ________.

a. Hardware b. Variable c. Software d. program

3. Software is classified into ________ types.

a. 2 b. 3 c. 4 d. None

3. ________ software is a collection of system programs.

a. System b. Application c. Program d. Data

4. ________ software is a collection of programs meant for specific application.

a. System b. Application c. Program d. Data

5. A program is developed using a ________language.

a. High Level b. Low level c. Procedural d. English

6. Developing a program using ________ language is called program development.

a. High Level b. Low level c. Procedural d. English

7. Entering the developed program into computer is called ________

a. Program Editing b. Program Entering c. Program development d. Execution

8. The process of translating the edited program as an executable machine code is called _______

a. Translation b. Program Entering c. Program development d. Execution

9. Normally, the editor is provided along with the ________

a. Assembler b. Compiler c. Converter d. translator

10. C. was developed in the year ________

a. 1970 b. 1971 c. 1972 d. 1980

11. C. was developed by ________

a. BjarneStroustrup b. Dennis Ritchie c.James Gosling d. Ken Thompson

12. C was developed at ________.

a. AB & B Laboratory, U.S.A b. AT & T Bell Laboratory, U.S.A

c. AT & T Laboratory, UK d. AT & T Bell Laboratory, USSR


13. C was mainly influenced by the languages ________

a. Java & C++ b. Java & COBOL c. BCPL & B d. BCPL & C++

14. B. language was developed in the year ________

a. 1970 b. 1971 c. 1972 d. 1980

15. B language was developed by ________-

a. BjarneStroustrup b. Dennis Ritchie c. James Gosling d. Ken Thompson

16. The name C was derived from the languages -----

a. B & CPL b. CPL & C++ c. B & BCPL d. C & C#

17.C program should run through a ________

a. Interpreter b. Compiler c. Loader d. Data

18. Executable code will have the extension ________

a. .txt b. .c c. .exe d. exg

19. The C program is the ________ readable form.

a. Machine b. Human c. Mobile d. All of the above

20. The Executable code is the ________ readable form.

a. Machine b. Human c. Mobile d. All of the above

21. ________ is the C compiler for UNIX Machine.

a. cc or gcc b. c or bb c. BCPL or B d. All of the above

22. ________ is the widely used commercial compiler.

a. Microsoft Visual C++ Environment b. Sun Microsystem

c. Microsoft C++ d. ANSI C

23. In include section, ________ files must be included.

a. header b. footer c. executed d. All

24. ________ function should be present in all C programs.

a. main() b. sqrt() c. abs() d. strlen()

25. ________ function is the starting point of the program.

a. main() b. sqrt() c. abs() d. strlen()

Answers


1 C 2 A 3 A 4 A 5 D

6 A 7 B 8 A 9 B 10 C

11 B 12 B 13 C 14 A 15 D

16 C 17 B 18 C 19 B 20 A

21 A 22 A 23 A 24 A 25 A


UNIT II - OPERATORS, CONTROL STRUCTURES AND LOOPING

1. ________ are defined as a symbol that specifies an operation to be performed on the operands.

a. Operators b. Expressions c. Variables d. Data

2. ________ is a function which is applied to values to give a result.


3. Operators and values are combined to form ________-


4. ________ operators are used to assign a value or an expression or a value of a variable.

a. Assignment b. Relational c. Ternary d. Logical

5. Assignment operators are used to assign a ________

a. Value b. Expression c. Value of another variable d. All of the above

6. Simple assignment is denoted by ________

a. = = b. = c. += d. -=

7. Odd one out.

a. = = b.* = c. += d. -=

8. Which operator is compound assignment operator.

a. * = b. += c. -= d. All

9. Which arithmetic operator gives the remainder of the division.

a. + b. % c. / d. *

10. ________ is called increment operator.

a. ++ b. -- c. + d. +=

11. ________ is called decrement operator.

a. ++ b. -- c. + d. +=

12. i++ is equivalent to ________.

a. i = i+1 b. I = I – 1 c. i=i+2 d. None

13. i-- is equivalent to ________.

a. i = i+1 b. i = i – 1 c. i=i+2 d. None

14. i+=10 is equivalent to________.

a. i =i+10 b. i=i-10 c=i+1 d.None

15. Find the final value in the expression, int a=8, b=9, c; c = a++ + --b;

a. 16 b. 17 c. 18 d. error


16. Relational operator returns the value ________ .

a. 0 or 1 b. -1 or +1 c. +1 or -1 d. Address

17. Consider, int a = 4; a++; now the value of á. is ________ .

a. 4 b. 5 c. -4 d. -5

18. conditional operators are also called ________.- operator

a. Assignment b. Relational c. Ternary d. Logical

19. Consider, int a=3, b=4, max; max = (a > b) ?a:b; the value of max is ________

a. 4 b. 3 c. 0 d. 1

20. ________ is a comparison operator.

a. == b. = c. + d. *

21. Which operator is not a relational operator?

a. == b. = c. <= d. >=

22. ________ is OR operator.

a. && b. ! c. || d. &

23. Bitwise operators operates on ________ only.

a. Integer b. Float c. Char d. String

24. Which operator is Logical NOT operator?

a. ! b. & c. ^ d. ||

25. ________ is Shift right operator.

a. <= b. >> c. << d. >=

Answers


1 A 2 A 3 B 4 A 5 D

6 B 7 A 8 D 9 B 10 A

11 B 12 A 13 B 14 A 15 B

16 A 17 B 18 C 19 A 20 A

21 B 22 C 23 A 24 A 25 B


UNIT III - ARRAYS

1. ________ is defined as an ordered sequence of finite data items of the same data type.

a. Array b. Structure c. pointer d. union

2. Array is a ________ data type.

a. Derived b. Primitive c. User defined d. int

3. In general, arrays can be classified into ________ types.

a. 2 b. 3 c. 4 d. many

4. One dimensional array is also known as ________ array.

a. scalar b. vector c. matrix d. none

5. ________ dimensional array can be represented as a list of data items.

a. one b. two c. three d. multi

6. ________ dimensional array can be represented as table of data items consisting of rows and columns.


7. Two dimensional array is also known as ________

a. scalar b. vector c. matrix d. none

8. The format of declaring one dimensional array is ________

a. data_type array_name[size]; b. array_name data_type[size];

c. data_type array_name(size); d. data_type array_name{size};

9. C uses ________ as a way of describing a collection of variables with identical properties.


10. Array subscript starts with ________ and ends with ________

a. 0 to n-1 b. 0 to 100 c. 1 to n-1 d. 1 to 10

11. Array index(subscript) starts from ________

a. 0 b. 1 c. both a or b d. none

12. Array subscript cannot be ________

a. Integer b. positive c. Negative d. none

13. Array subscript should be a ________ integer.

a. Integer b. positive c. Negative d. none

14. Consider int a[100]; the members of the array a is accessed from ________.

a. 0 to 99 b. 1 to 100 c. 0 to 100 d. 1 to 99

15. Arrays may be ________ dimensional or ________ dimensional.

a. one, two b. one, multi c. one, many d. all


16. Array subscript should enclosed within ________.

a. [ ] b. ( ) c. { } d. all

17. ________ is a single entity holding a sequence of data items of similar data types.


18. ________ dimensional array can be used to represent a collection of tables.


19. An array with more than two dimensions is called ________ dimensional array.

a. Many b. two c. three d. multi

20. The list of array initializers should be enclosed by ________-

a. [ ] b. ( ) c. { } d. all

21. Consider int a[10]; We can store ________ elements in the array a.

a. 10 b. 9 c. 20 d. 100

22. consider int a[3]={ 10, -2, 100}; Value stored in a[2] = ________

a. 10 b. -2 c. 2 d. 100

23. Arrays can be initialized in its ________only.

a. declaration b. execution c. Both a & b. d. none

24. Consider int x[ ] = { 1,2,3,4,5,1000}. This makes the array x having ________ elements.

a. 5 b. 6 c. 1000 d. 100

25. Consider int a[10]; No. of bytes allotted in the array is ________ bytes.

a. 10 b. 20 c. 40 d. 80

Answers


1 A 2 A 3 A 4 B 5 A

6 B 7 C 8 A 9 A 10 A

11 A 12 C 13 B 14 A 15 B

16 A 17 A 18 C 19 D 20 A

21 A 22 D 23 A 24 B 25 B


UNIT IV - FUNCTIONS

1. ________ accepts parameters and returns a result.

a. Function b. Array c. Data d. None

2. C functions accept unlimited number of ________-

a. parameters. b. data c. values d. None

3. Execution of the program starts from ________

a. Pre-processor directive b. main( ) function

c. Global variable d. printf( )

4. ________ statement is important to any function that returns result.

a. printf( ) b. scanf ( ) c. return d. void

5. Functions that doesn’t return any value/s will be declared as ________

a. printf( ) b. scanf ( ) c. return d. void

6. Function that calls itself is called as ________.

a. User defined function b. void function

c. Recursive function d. All the above

7. Function parameters are always enclosed within ________.

a. [ ] b. ( ) c.{ } d. <>

8. Generally functions are divided into ________ types.

a. 2 b. 3 c. 4 d. 5

9. ________ functions are predefined and supplied along with the compiler.

a. User defined b. built in c. void d. none

10. An ________ followed by the open parenthesis is recognized as a function by the compiler.

a. Identifier b. constants c. tokens d. loops

11. ________ declares the function name and its parameters.

a. Data type b. output c. prototype d. input

12. Built in functions are also called as ________ function.

a. User defined b. Library c. void d. None

13. Default return type of a function is ________

a. int b. float c. char d. void

14. ________ function sends the output into a file.

a. puts() b. printf() c. fprintf() d. scanf()

15. Body of the function is always included within ________

a. [ ] b. ( ) c. { } d. <>


16. Parameters of a function is otherwise called as ________

a. Arguments b. output c. input d. data

17. Every function is identified by ________

a. Parameters b. Function name c. input d. void

18. The function defined by the user is called ________ function.

a. User defined b. Library c. void d. Built in

19. A function which invokes other function is known as ________ function.

a. Calling b. Called c. Builtin d. recursive

20. A function which is invoked by other function is known as ________ function.

a. Calling b. Called c. Builtin d. recursive

21. A function does not have any parameter is called as a function ________

a. without parameter b. with parameter c. empty parameter d. none

22. A function ________ describes what a function does.

a. definition b. declaration c. initialization d. none

23. A function should be ________ whenever and wherever it is invoked.

a. defined b. declared c. initialized d. none

24. In function declaration, the return type is optional for returning ________ value.

a. int b. float c. char d. string

25. ________ functions executes slowly.

a. Calling b. Called c. Built in d. Recursive

Answers


1 A 2 A 3 B 4 C 5 D

6 C 7 B 8 A 9 B 10 A

11 C 12 B 13 A 14 C 15 C

16 A 17 B 18 A 19 A 20 B

21 A 22 A 23 B 24 A 25 D


LESSON V - POINTERS

1. ________ is a variable that points to a memory location.

a. array b. structure c. pointer d. data

2. Each memory cell is given an identification number called ________.

a. location b. address c. memory d. none

3. The variable that hold memory addresses are called ________


4. Choose the correct statement related to pointer.

a. Increase the execution speed of the program b. Reduce the length and complexity of a program

c. Easy to understand a program d. Both a & b.

5. ________ operator is used to access the address of any variable.

a. * b. & c. ^ d. @

6. ________ operator is called address operator.

a. * b. & c. ^ d. @

7. consider int a, *b=&a; then p has ________

a. the value of a b. the address of a

b. null value d. both a & b

8. Pointers will return the address as _________ value.

a. Binary b. Hexadecima l c. Octal d. None

9. Choose the pointer variable______.

a. int&a; b. int a; c. int *a; d. int a*;

10. Each memory cell in the computer has an ________that can be used to access that location.

a. location b. address c. memory d. none

11. ________ increases the executions of the program.


12. ________ reduce the length and complexity of a program.


13. ________ enable us to access a variable that is defined outside the function.


14. ______ are used to pass information back and forth between a function and its reference point.


15. ________supports dynamic memory allocation.



16. ________ can improve the efficiency of certain routines.


17. ________ provide support for dynamic data structure such as binary trees and linked lists.


18. Which of the following is the reason to use pointer in a program.

a. It supports dynamic memory allocation.

b. It can improve the efficiency of certain routines

c. It provides support for dynamic data structure such as binary trees and linked lists.

d. All the above.

19. A ________ is a variable that contains the memory location of another variable.


20. The ________ symbol tells the compiler that you are creating a pointer variable.

a. * b. & c. ^ d. @

21. A pointer contains _________ value until it is initialized.

a. Hexadecimal b. Garbage c. Octal d. None

22. int *a; declares the variable a as a pointer variable that points to a ________variable.

a. integer b. float c. char d. double

23. The value of the variable can be accessed using ________ variable.


24. ________ is called as indirection operator.

a. * b. & c. ^ d. @

25. In pointers, * is called as ________ operator.

a. direction b. indirection c. address d. arithmetic

Answers


1 C 2 B 3 C 4 D 5 B

6 B 7 B 8 B 9 C 10 B

11 C 12 C 13 C 14 C 15 C

16 C 17 C 18 D 19 C 20 B

21 B 22 A 23 C 24 B 25 B


Annexure V e – Question Bank – Certificate in C++ Programming

IECD



Certificate in C++ Programming

Course Code –CPP

UNIT I - INTRODUCTION TO C++

1. ____________was developed as an alternative to FORTRAN.

a) ALGOL 60 b) CPL c) BCPL d) C

2. Expansion of BCPL____________.

a)Basic Combined Programming Language b) Basic Collective Programming Language

c) Basic Concept Programming Language d) Basic Corrected Programming Language

3. Who developed the BCPL?

a) Martin Richards b)Dennis Ritchie c)Ken Thompson d) Bjarne Stroutrup

4. ____________immersed in the development of UNIX at Bell Labs


5. Who developed the basis of C?


6. Who developed the C++ Language?


7. C++ developed in the year of ___________.

a) 1973 b)1980 c) 1983 d)1985

8. In which year on ANSI Committee began the development of a specific standard for C++ ___________.

a) 1990 b)1980 c) 1983 d)1985

9. __________is the process to convert one data type to another data type.

a)Inheritance b)Enum c)Type Casting d)Encapsulation

10.____________is converted into executable machine code by utility program

a) Assembler b)Loader c)Linker d)both a & b

11.____________ uses a mnemonic to represent each low level machine operation

a) Assembly Language b) Low Level Language c)High Level Language d) Machine Level Language


12. It allows a greater reusability of code in a more logical and productive way ___________.

a) Object Oriented Programming b) Machine Level Programming

c) Low Level Programming d) High Level Programming Language

13. ____________is backwards compatible with C language.

a) C b)C++ c) Java g)BCPL

14. ___________defines the abstract characteristics of a thing.

a) class b) Object C) method d) Abstraction

15.An ____________is the instance of class.

a) Class b) Object C) Method d) Abstraction

16.____________means that the way the programmer showing only the essential features of a class

without including the background details

a) Class b) Object C) Method d) Abstraction

17.The process of combining the data member and member function___________.

a) Class b) Object C)Encapsulation d) Abstraction

18.The Process by which an object sends data to another object is called as___________.

a) Encapsulation b) Abstraction c) Message Passing d)Inheritance

19. The Process of creating a new classes bsed on the existing Class is called as ---

a) Encapsulation b) Abstraction c) Message Passing d)Inheritance

20. ____________ can reuse the data and member function which is defined already in an existing class

a) Class Programmer b)Class Member c) Member Class d) data member

21. How many types of Inheritance?

a) 5 b) 6 c)7 d)8

22.The ability in expressing a thing in different and multiple ways____________

a) Encapsulation b) Abstraction c) Message Passing d)Polymorphism

23. How many types of Polymorphism?

a) 5 b) 6 c)2 d)8

24. ____________is a type of Run Time polymorphism

a) Virtual function b) Member Function c) Friend Function d) Multiple Function

25. The same operator is used for multiple different purpose is known as _________.

a)Operator Overloading b) Function Overloading c) Virtual Function d) Add Function


Answers


1 A 2 A 3 A 4 C 5 B

6 D 7 B 8 A 9 C 10 A

11 A 12 A 13 B 14 A 15 B

16 D 17 C 18 C 19 D 20 A

21 B 22 D 23 C 24 A 25 A


UNIT – II - OPERATORS

1. ___________ defines the precedence order in which operator are evaluated.

a) Order b)Grouping c) Priority d) None of the above

2. ________operator assigns a value to a variable.

a) Assign b) Equal to( = ) c) Assignment d) b) or c)

3. The lvalue in an arithmetic expression must be a _____________ .

a) Variable b) Constant c) Operator d) Symbol

4. The rvalue in an arithmetic expression must be a __________.

a) Variable b) Constant c) Operator d) Symbol

5. The assignment operation takes place from __________.

a) Left to right b) Right to left` c) a) and b) d) None of the above

6. What will be the value of ‘a’ and ‘b’ after the execution of

A = 10; B= 5; A=b; B=20;

a) 10,5 b) 5,10 c) 5,20 d) 10,20

7. _________is the modulo operator .

a) / b) % c) \ d) #

8. __________ is a compound assaignment operator .

a) = b) = = c) += d) = +

9. Unary operators perform operation over ______ variable(s).

a) Two b) Single c) Any d) None of the above

10. Values of current variables can be modified by changing their values using the ___________operators.

a) Assignment b) Arithmetic c) Compound assignment d) Modulo

11. What will be the value of ‘a’ in the following snippet?

int a , b =3;

A=b;

A+=2;

cout <<a;

a) 3 b) 2 c) 5 d) 6

12. Increment operator increases the value stored in a variable by ____________.

a) One b) Any value c) Given value d) None of the above

13. a = a + a is equivalent to _________.

a) a+ =1 b) a=+1 c) 1+=a d) 1=+a


14. Find the value of ‘b’ and ‘c’ in the following snippet

A=3;

B= ++a;

C=a++;

a) 3,4 b) 4,5 c) 3,3 d) 4,4

15. __________operator returns a Boolean value.

a) Arithmetic b) Relational c) Logical d) Conditional

16. Relational and equality operators are used to _________ two values.

a) Evaluate b) Relate c) Compare d) Assign

17. The result of 3! = 2 will be ___________.

a) 3 b) 2 c) True d) False

18. ___________ is the logical AND operator

a) & b) && c) ; d) ;;

19. Not operator (!) has __________ operand(s)

a) Zero b) One c) Two d) Many

20. ! true evaluates to ______ ( True or False )

a) True b) False c) Else d) None

21. ____________ is the conditional operator.

a) ? b) : c) ?: d) &&

22. _________ operator is also called as Ternary operator


23. __________ operator is used to separate two or more expressions.

a) - b) / c) , d) :

24. The value of a and b in the statement

A=(b=3,b+2); will be

a) 3,2 b) 3,5 c) 5,3 d) 2,3

25. __________ operator combines two or more expressions.



Answers


1 B 2 D 3 A 4 B 5 B

6 C 7 B 8 C 9 B 10 C

11 C 12 A 13 A 14 D 15 B

16 C 17 C 18 B 19 B 20 B

21 C 22 D 23 C 24 C 25 C


UNIT- III - CONTROL STRUCTURES LOOPING & ARRAY

1. ________ are used for controlling the flow of execution by checking the conditions.

a) Statements b) Instructions c) Control structures d) Arrays

2. Control structures are of ________major types.

a) 2 b) 3 c) 4 d) 5

3. Expressions are used to represent condition checking by using a _____________.

a) Arithmetic b) Relational c) Logical d) b) or c)

4. _________ keyword is used to execute a statement or a block only if a condition is fulfilled.

a) for b) while c) do while d) of

5. A statement block can be specified using _____________ .

a) { } b) ( ) c) [ ] d) / * /

6. ___________statement is used to choose between two alternatives.

a) of b) if – else c) while d) do while.

7. _________ statement checks several possible constant values for an expression.

a) switch b) while c) for d) do- while.

8. __________is the keyword to exit from switch statement

a) Switch b) case c) default d) break

9. ___________is optional in the switch structure.

a) switch b) case c) default d) break

10. _________are used to repeat a statement a certain number of times.

a) Loops b) Control statements c) Decisions d) Expressions.

11. There are __________ types of loop control statements.

a) 2 b) 3 c) 4 d) 5

12. _________ is an entry controlled loop.

a) for b) while c) do-while d) a) and b)

13. _________is an exit controlled loop.

a) for b) while c ) do while d) switch

14. ___________statement specifies initialization, increment of decrement and condition

a) for b) while c ) do while d) switch

15. The ____________part in for statement is executed only once.

a) Initialization b) Increment c) Condition d) All the above


16. The __________ fields are optional in the for statement.

a) Initialization b) Increment/decrement c) Condition d) a) and b)

17. The sections in the for statement are separated by ____________

a) Comma b) Braces c) Colon d) Semicolon

]18. __________ operator is an expression separator

a) Comma b) Braces c) Colon d) Semicolon

19. ___________ statement is executed at least once even if the condition is never fulfilled.

a) of b) for c) while d) do-while

20. __________ statement is used to end an infinite loop.

a) Break b) Default c) Continue d) None

21. _________ statement causes the program to ship the rest of the loop.


22. _________statement jumps to the start of the following iteration.


23. __________statement jumps to another point in the program.

a) Goto b) Break c) Continue d) Switch

24. A label is made of an identifier followed by a _____________

a) Semi colon b) Comma c) Colon d) Symbol

25. __________function is defined in the cstdlib library

a) Main b) Exit c) Go to d) All the above

Answers


1 C 2 A 3 D 4 D 5 A

6 B 7 A 8 D 9 C 10 A

11 A 12 D 13 C 14 A 15 A

16 D 17 D 18 A 19 D 20 A

21 B 22 B 23 A 24 C 25 B


UNIT - IV -FUNCTIONS ,CLASSES & OBJECTS

1. A ____________is a group of statements that is executed when it is called from some point of the

program

a) Pointer b) Function c) Array d)Structure

2.___________ is the data type specifier of the data returned by the function .

a)Type b)Parameters c)Statements d) Function

3.Each ____________consists of a data type specified followed by an identifier.


4.____________is the function’s body .


5. The function statements that are in normal definitions are enclosed in _________braces .

a) <> b)() c)[] d) {}

6. End the prototype declaration with a mandatory ____________.

a) ; b)() c)[] d) {}

7. Syntax of a function declaration ?

a) Type name ( argument1, argument2..)statement a) Type cast ( argument1, argument2..)statement

a) Type definition ( argument1, argument2..)statement a) Type case ( argument1, argument2..)statement

8. ____________can also be used in the function’s parameter list.

a) Function b) Parameter c) Void d)Main

9.____________indicate that this is a call to a function and not the name of a variable or some other C++

statement.

a)Parameter b)Parenthesis c) Array d)Pointer

10. The argument passed to the function have been ___________.

a) Pass by method b) Pass by reference c)Pass by value d) Pass by pointer

11.The declaration of duplicate data type of each parameter was followed by an __________.

a) <> b)() c)[] d) &

12. Ampersand specifies that their corresponding arguments are to be ____________instead of by value.

a) Pass by method b) Pass by reference c)Pass by value d)Pass by pointer

13.____________is the property that function have to be called by themselves.

a) Recursivity b) Function c)Pointer d) Array

14. 5! is ____________.

a)120 b)140 c)160 D)180


15. _________indicates the compiler that inline substitution is preferred to the usual function .

a) Inline specifier B|) Array c)Pointer d) Function

16. __________starts with the keyword inlines.

a) Inline b Array c)Pointer d) Function

17. ____________will use as macro function.

a) Array b)Pointer c) Function a)Inline

18. ____________has no return value.

a) Array b)Pointer c) Function a)Inline

19. Inline statement should not be used with ____________statement.

a)Break b) Continue c)Go to d) While

20. Ife the same function is used for multiple purpose then it will be called as____________.

a) Operator overloading b) Function overloading c)An Array d) friend function

21. _______________is used for performing more than one task using the same function or operator.

a) Overloading b) Function overloading c)An Array d) friend function

22. How many types of overloading?

a)1 b)2 c)3 D) 4

23.____________Operator is used to work with 2 operands , therefore with the user defined as an argument.

a)Unary b)Ternary c) Binary d) bitwise

24.____________is a collection of similar objects.

a) Object b) Function C) Data d) Class

25. ____________is a real world entity.

a)Data and object b) Data & class c)Data and member d) Data and function

Answers


1 B 2 A 3 B 4 C 5 D

6 A 7 A 8 C 9 B 10 C

11 D 12 B 13 A 14 A 15 A

16 A 17 D 18 D 19 C 20 A

21 A 22 B 23 C 24 D 25 C


UNIT –V - INHERITANCE AND POLYMORPHISM

1.________________is a special function which is used to initialize the data member of the class, the

objects was created.

a)Destructor b) Constructor c) Inline d) Member Function

2. ____________of the constructor is the name of the class

a) Name b) Void c) Class d) Object

3. ____________Constructor is specified normally in the program .

a) Simple b) Parameterized c) Constructor with default values d) Multiple

4. ____________constructors are constructors with argument .


5. ____________constructor contains argument with default values.


6. ____________constructor is named with presence of more than one constructor with the same name .


7.___________is a special function which is used to remove the objects which was created by using the

constructor function .

a)Destructor b) Constructor c) Inline d) Member Function

8.Destructor will be preceded by the symbol____________.

a)= b)^ c)~ d)-

9. Multiple constructor exists with the different number of argument , then it is said to be __________.

a) Simple b) Polymorphic c) Constructor with default values d) Multiple

10.____________is the property of C++ that object of one class acquires the properties of objects.

a) Polymorphism b)Inheritance c) Encapsulation d) Member Function

11. Base class is also known as ____________.

a) Sub Class b)Main Class c) Super Class d) Class

12. Derived Class is also known as____________.

a) Sub Class b)Main Class c) Super Class d) Class

13. How many types of inheritance modes available in C++?

a)1 b)2 c)3 D) 4

14. How many types of inheritance?

a)1 b)2 c)3 D) 5


15. ____________inheritance contains one Base class and One Derived Class.

a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance

16 . ____________ inheritance contains one Base class and Multiple Derived Class.


17. ____________ inheritance contains Multiple Base class and One Derived Class.


18. ____________ inheritance contains more than one Base class and more than One Derived Class.


19. ____________ inheritance contains Base class and Derived Classes are constructing a tree like

structures.


20. ____________ inheritance is the constructed structure of the combination of both multiple and

multilevel Inheritance.

a)Hybrid Inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance

21. ____________ inheritance contains the base and derived classes are constructed to form multiple paths

among them.

a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Multi Path Inheritance

22.____________is designed to be specially used as a base class.

a) Abstract b) Base c) Derived d)Multiple

23.______________are used to operate with the object of the same class or different classes.

a) Friend Function b) Member C) Class d) Abstract

24. A Friend function starts with the keyword ____________.

a)friendclass b) friend c) friend object d)main

25. Abstract class is used as a _________.

a) Base class only b) Derived class c) Both derived & base class d) None of these

Answers


1 B 2 A 3 A 4 B 5 A

6 C 7 A 8 C 9 B 10 B

11 C 12 A 13 C 14 D 15 A

16 A 17 B 18 C 19 D 20 A

21 D 22 A 23 A 24 B 25 C


Annexure V f – Question Bank – Certificate in Graphics Design

IECD



Certificate in Graphics Design

Course Code –CGD

UNIT – I - IN DESIGN

1. ___________ is desktop publishing and design software.

a) Indesign b) CorelDraw c) Photoshop d) All of these

2. In design software is used to create materials such as posters, flyers, brochures, magazines, newspapers,

books and other forms of documentation.

a) Coreldraw b) Photoshop c) Indesign d) None of these

3. _________ is a powerful design program.

a) Indesign b) CorelDraw c) Photoshop d) All of these

4. In step1, Open In design and you will be presented with an ___________ screen.

a) Information b) instruction c) introduction d) Intimation

5. To change rulers and points values go to ___________ PreferenceUnits and increments.

a) Indesign b) Edit c) Layout d) Type

6. Under ________ units, change the horizontal and vertical values to desired unit of measurement.

a)Toolbar b) Toolbox c) Image d) Layout

7. The origin of the ruler can be ___________.

a) Spread b) Page c) Spine d) All of these

8. By selecting spread, the ruler will start from the __________ of the document and span across the spread

of the document.

a) Right b) Left c) Center d) None of these

9. By selecting page, the ruler will start at the left hand side and stop when it gets to the end of the page and

it will start at ___________ again.

a) One b) Two c) Zero d) Hero

10. By selecting spine, the ruler will start its zero point from the spine and work to the __________ of the

document.

a) Edge b) End c) Top d) Bottom

11. In introduction screen, to create a new document click on the __________ and select create new document.

a) Right b) Left c) Center d) None of these


12. There are __________ steps to create and viewing documents.

a) 2 b) 6 c) 5 d) 4

13. If you need to adjust the margins or columns go to ___________ Margins and Columns.

a) Toolbar b) Toolbox c) Image d) Ruler

14. Create and manipulate documents and files using elements, such as ___________.

a) Panels b) Bars c) Windows d) All of these

15. Any arrangement of panels, bars and windows elements is called ___________.

a) Work book b)Workspace c)Work done d) Work design

16. The __________ of the different applications in Adobe®

Creative Cloud®

share the same appearance so

that you can move between the applications easily.

a) Work book b) Workspace c) Work done d) Work design

17. The __________bar across the top contains a workspace switcher, menus and other application controls.

a) Tool b) Application c) Vertical d) Control

18. There are ___________ types of page orientation.

a) 5 b)1 c) 3 c) 2

19. The default page orientation is ___________.

a) Landscape b) Portrait c) Page d) Preview

20. The ___________ contains tools for creating and editing images, artwork, and page elements.

a) Tools panel b) Control panel c) Tools panel d) All of these

21. The __________ displays options for currently selected tool.

a) Tools panel b) Control panel c) Tools panel d) All of these

22. In ___________, the control panel displays options for currently selected objects.

a) Adobe Photoshop b)Adobe Flash c) Abode reader d) Illustrator

23. In Adobe Photoshop, the control panel is known as the __________.

a) Option bar b) Property c) Layers d) Tool bar

24. In Adobe Flash®

, Adobe Dream Weavers®

and Adobe Fireworks®

, the control panel is known as

_________.

a) Prospectus b) Property inspector c) Proportion d) Application

25. The ___________ displays the file you are working on.

a) Document window b) Dos window c) Darkling window d) Dark window


Answers


1 A 2 C 3 A 4 C 5 A

6 D 7 D 8 B 9 C 10 A

11 A 12 D 13 D 14 C 15 B

16 B 17 B 18 C 19 B 20 A

21 B 22 D 23 A 24 B 25 A


UNIT – II - IN DESIGN PAGES

1. We can quickly add a new blank page to a document using the __________ panel.

a) Pages b) Panel c) Master page d) New page

2. Insert Pages command present in __________ menu.

a) Window b) File c) Options d) None of the above

3. Click the pages option from the __________ menu.


4. To insert page, Click the ___________ New Page button on the panel.

a) Delete b) View c) Create d) None of the above

5. To use the Duplicate option, click spread command on the _________menu.


6. Click the Insert list arrow and then specify __________ Page to Insert new pages after a specific page.

a) Window b) After c) Options d) None of the above

7. __________Page is used to Insert new pages before a specific page.

a) Before b) After c) Options d) None of the above

8. At start of Document option, Inserts new pages at the _________ of the document.

a) End b) Stop c) Start d) After

9. At End of Document option, Inserts new pages at the _________ of the document.

a) End b) Stop c) Start d) After

10. Click the master list arrow, and then select a _________ page to use as the basis for the new page.

a) Master b) Non master c) a or b d) None of the above

11. Frames are containers that hold text, but they can also hold graphics or may even be used to hold nothing

but a color, such as a shape in a design or a __________color.

a) Back color b) Black color c) Background color d) All of these

12. Which option is used to open an existing file?

a) File b) Open c) New d) Save

13. To save the document, choose ___________ Save As.

a) File b) Open c) New d) Save

14. In the Tools panel, click to __________ and used to create a new text frame.

a) Type tool b) Text tool c) Frame tool d) Graphic tool

15. __________ stands for In design document.

a) Indd b) Idd c) iddo d) None of the above


16. In design software files are stored in the extension ___________.

a) .docx b) .indd c) .ind d) .doc

17. In the panel docking area along the ___________ side of the workspace, click the Paragraph Styles button

to open the Paragraph Styles panel.

a) Left b) Right c) Center d) None of the these

18. In order to apply a completely clean paragraph style to a block of text, press the __________ key and click on a

style of your choice.

a) Shift b) Ctrl c) Alt d) None of these

19. Example of word processing software is Microsoft Word, and saves as a plain _________ file.

a) .txt b) .doc c) .docx d) .htm

20. If we want to insert images, choose File ___________.

a) Insert b) Place c) New d) Tools

21. What is the shortcut key for Select all?

a) ctrl+A b) ctrl + s c) ctrl+p d) ctrl+w

22. Deselect all option is present in the _________ menu.

a) Edit b) View c) File d) Window

23. Choose the Selection Tool in the _________ panel.

a) Control b) Tools c) Text d) Styles

24. Using the selection tool click once on the _________ plus sign in the lower – right corner of the text frame.

a) Green b) Blue c) Red d) Yellow

25. By default, __________ begin measuring from the upper – left corner of a page or spread.

a) Margins b) Scale c) Rulers d) None of these

Answers


1 A 2 C 3 A 4 C 5 C

6 B 7 A 8 C 9 A 10 C

11 C 12 A 13 A 14 A 15 A

16 B 17 B 18 C 19 A 20 B

21 A 22 A 23 B 24 C 25 C


UNIT – III - PHOTOSHOP

1. Adobe Photoshop is a graphics editing program developed and published by ____________.

a) Adobe b) Microsoft c) Dell d) Apple

2. ___________ is a pixel – based image editor.

a) Photoshop b) Paint c) Piccolo d) Pica

3. The powerful tools used to enhance and edit these pictures are capable for use in the digital world including

the infinite possibilities of the __________.

a) Internet b) Intercom c) Intermission d) None of these

4. __________ is used to select pixels.

a) Selection tool b) Brush tool c) Type tool d) Magic want tool

5. ________ is used to paint on pixels with the foreground color.

a) Selection tool b) Brush tool c) Type tool d) Magic want tool

6. ________ tool is used to typeset text and so on.

a) Selection tool b) Brush tool c) Type tool d) Text

7. Tool keyboard shortcuts are shown to the _________ of the tool name.

a) Right b) Left c) Top d) Bottom

8. _________format is probably the most important.

a) PSD b) PNG c) TIFF d) GIF

9. _________ is the leading digital image editing application for the internet, print and other new media

disciplines.

a) Photoshop b) Paint c) Piccolo d) pica

10. PSD stands for _____________.

a) Photoshop Digital b) Photoshop Dual c) Photoshop Document d) Picassos Document

11. __________ is the Photoshop’s native file format.


12. __________ is one of the few file types that fully support all of the powerful features that Photoshop gives

us like layers, layers masks, adjustment layers, channels, paths and so on.


13. Photoshop files sometimes have the file extension ___________.

a) PSD b) PSB c) TIFF d) GIF

14. PSB stands for __________.

a) Photoshop big b) Photoshot bag c) Photoshop bitmap d) None of the above


15. A PSB file extends the PSD file format, increasing the maximum height and width to 300,000 pixels and the

length limit to around _________ Exabyte’s.

a) 5 b) 4 c) 7 d) 9

16. JPEG stands for ___________.

a) Joint Photographical export Group b) Joint Photo expert Graph

c) Joint Photographic Expert Group d) None of these

17. JPEG supports ____________ bit color.

a) 35 b) 24 c) 32 d) 16

18. JPEG can reproduce roughly ___________ million colors.

a) 14.7 b) 16.7 c) 15.7 d) 17.4

19. The digital cameras can capture images as ___________ files.

a) GIF b) EPS c) JPEG d) PNG

20. Most high end digital SLR cameras give you the option of capturing images in either the _________ format.

a) JPEG b) RAW c) a and b d) a or b

21. GIF stands for ____________.

a) Graphical Interchange Format b)Graphics Interleave Format

c) Graphs Interchange Format d) All of these

22. GIF files can display up to ___________ colors.

a) 1026 b) 256 c) 254 d) 264

23. SLR stands for __________ .

a) Single Lens reflex b) Simple lens reflex c) Set lens repeat d) Single lex reflect

24. GIF format has been around even longer than __________, and it’s the format of choice for web graphics.

a) GIF b) EPS c) JPEG d) PNG

25. PNG stands for ______________.

a) Photoshop Net Graphics b) Portable Network Graphics

c) Photo Nut Graphics d) Picosmos Network Graphics

Answers


1 A 2 A 3 A 4 A 5 B

6 C 7 A 8 A 9 A 10 C

11 A 12 A 13 B 14 A 15 B

16 C 17 B 18 B 19 C 20 C

21 C 22 B 23 A 24 C 25 B


UNIT – IV - COREL DRAW

1. __________ is the extensive text – handling & precision drawing features.

a) Photoshop b) In design c) CorelDraw d) None of the above

2. _________ is the ideal tool for virtually design project from logos & product packaging to technical

illustration and advertisements.


3. __________ is a vector graphics editor.


4. Corel Draw is marked and developed by __________ Corporation of Ottawa, Canada.

a) Lotus b) Quattro c) Microsoft d) Corel

5. ___________ is a bitmap image editor.

a) Corel CAPTUR b) Corel PHOTO-PAINT c) CorelDraw RAVE d) Corel Draw

6. ___________ editor is a computer program that allows to compose and edit vector graphics images

interactively on a computer.

a) Vector graphics b) Text c) Image d) None of the above

7. Which of the following the formats are popular vector graphics format?

a) EPS b) PDF c) SVG d) All of these

8. Which of the following the formats are not popular vector graphics format?

a) EPS b) PDF c) SVG d) HTML

9. WMF stand for ___________.

a) Window Media Format b) Window Morph Format

c) Window Mass File d) Window Multiple Files

10. SVG stands for ___________.

a) Scalable Vector Graphics b) Scale vertical graphics

c) Scroll Vertical Graphics d) Scale Vector Graphs

11. VML stands for ___________.

a) Vector Markup Language b) Video Markup Language c) Vector Mark List d) Video Morph list

12. Lock object is present in which menu?

a) File b) View c) Window d) Arrange

13. Guidelines option is present in which menu?


14. Unlock object is present in which menu?



15. Default guidelines color is __________.

a) Red b) Green c) Black d) Orange

16. Double click on the horizontal guideline using _____ tool?

a) Pick b) Select c) Type d) Eraser

17. ___________ Options is one of the most important options you are going to use when drawing in Corel

draw.

a) Weld b) Trim c) Intersect d) Shaping

18. __________ Option allows you to combine objects together.


19. Which option is used to draw a complicated shape which consists of simpler shapes combined together?


20. Which option is used to trim the object?


21. PDF stands for ___________.

a) Portable Document Format b) Port document file c) Post Document format d) Print Document file

22. We can import a __________ file.

a) PDF b) JPEG c) AI d) All of these

23. We can import a file and place it in the active application window as an __________.

a) Object b) Import file c) Image d) None of these

24. The imported file becomes part of the _________ file.

a) Active b) Old c) New d) Existing

25. While importing a bitmap, you can resample it to reduce the file size, or crop it to eliminate unused areas of

the __________.

a) Photo b) Images c) Object d) None of these

Answers


1 C 2 C 3 C 4 D 5 D

6 A 7 D 8 D 9 A 10 A

11 A 12 D 13 B 14 D 15 B

16 A 17 D 18 A 19 A 20 B

21 A 22 D 23 A 24 A 25 A


UNIT – V - COREL DRAW EFFECTS

1. __________ are great for organizing objects in your graphics.

a) Layers b) Panels c) Designers d) All of these

2. By using layers, you can reduce your work time; make it easier to handle the job at hand and __________

the accuracy level of your designs.

a) Decrease b) Increase c) Insert d) Inter

3. The ________ docker lets you add, move and delete layers in a document.

a) Color style b) text style c) Font style d) Object manager

4. Object manager is present in which menu?

a) Edit b) File c) View d) Tools

5. You can set up layers before you __________ working on your document.

a) Top b) Bottom c) Begin d) End

6. You can customize the look of your pages by specifying different__________ layouts such as booklets, tent

card or brochure.

a) Page b) Pager c) Packet d) Style

7. You can toggle the page orientation between __________ and you can create a custom page size.

a) Landscape b) Portrait c) a and b d) None of these

8. Page setup option is present in which menu?

a) Edit b) File c) Layout d) Tools

9. You can select from a long list of common paper sizes including legal, business card and various

________ sizes.

a) Envelope b) Small c) Big d) Legal

10. Page background option is present in which menu?

a) Edit b) Layout c) View d) Tools

11. What is the shortcut key for convert to curves?

a) ctrl+o b) ctrl+q c) shift+q d) shift+o

12. What is the shortcut key for group all?

a) ctrl+G b) ctrl+c c) ctrl+q d) ctrl+o

13. Paragraph text frames automatically adjust to fit text. Click Tools _________.

a) Options b) Break c) Arrange d) Alignment

14. Import a __________ into a drawing either directly or by linking it to an external file.

a) External b) Internal c) Insert d) Input


15. The _________ bar provides information about the bitmap including color mode, size and resolution after it

has been placed on the page.

a) Standard b) Task c) Status d) Tool

16. ________ is graphics design software used specially for printing media as well as other designing purpose.

a) In Design b) Corel Draw c) Photoshop d) None of these

17. We can give _________ to text in Corel Draw same as done in Photoshop.

a) Engrave effect b) Emboss effect c) Empress effect d) Enact effect

18. The effect given in CorelDraw is sharper and attractive compared to __________.


19. Photoshop emboss effect is a _______ image.

a) Roast b) Raster c) Rest d) Rust

20. Raster image is not very sharp, while the text using _________ emboss effect is much sharper.


21. Go to Effects tab in menu bar and select _________ option.

a) Bevel b) Brave c) Reveal d) None of these

22. Select _________ option for style property.

a) Soft edge b) Surfer edge c) Smudge edge d) All of these

23. Effects tab includes the propertied like __________ etc.

a) Style of the effect and bevel offset b) Shadow color, light controls

c) Both a and b d) Either a or b

24. The effect of emboss depends upon the __________ controls.

a) Tools b) Text c) Light d) Type

25. Light controls include____________.

a) Intensity b) Direction c) Altitude d) All of these

Answers


1 A 2 B 3 D 4 D 5 C

6 A 7 C 8 C 9 A 10 B

11 B 12 A 13 A 14 A 15 C

16 B 17 B 18 C 19 B 20 B

21 A 22 A 23 C 24 C 25 D


Annexure V G – Question Bank – Certificate in Web Design

IECD



Certificate in Web Design

Course Code –CWD

UNIT – I – INTERNET CONCEPTS

1. The popular name for the Internet is the information _________.

a) Super highway b) Highway c) Both a & b d) None of these

2. The origins of the Internet reach back to research commissioned by the United States Government in the

a) 1988 b) 1967 c) 1960 d) 1976

3. The funding of a new U.S backbone by the National Foundation in the year _________.

a) 1980 b) 1960 c) 1990 d) 1989

4. __________ is a software program that allows a person to explore the Internet in an easy to use way.

a) Browser b) LAN c) WWW d) WAN

5. Examples of browser are __________.

a) Chrome b) Firefox c) Opera d) All of these

6. The Internet is approximately 100 times more people than were using it in __________.

a) 1960 b) 1995 c) 2000 d) 2002

7. The commercialization of what was by the _________ an international network resulted in its

popularization and incorporation into virtually every aspect of modern human life.

a) 1990 b) 2001 c) 1996 d)2002

8. Expansion of ISP is ___________.

a) Internet Service Provider b) Introduced Service Provider c) Inter Service Provider d) None

9. _________ broadband ensures connection speeds that come close to the wired broadband speeds

provided by DSL and cable ISPs.

a) Wired b) Wireless c) Internet d) None of these

10. Most Internet Societies due to the slow connection speed it ensures about ______ Kbit / s.

a) 70-80 b) 40-50 c) 10-20 d) 30-40

11. DSL stands for __________.

a) Digital Subscriber loop b) Digital subscribers line c) All the above d) None of the above

12. ADSL stands for _________.

a) Asymmetric Digital subscriber line b) Access Digital Subscriber line

c) Adavanced Digital subscriber loop d) None of these


13. SDSL stand for _________.

a) System Digital Subscriber loop b) Symmetric Digital Subscriber line

c) Advanced digital subscriber loop d) None of these

14. CMTS stands for __________ .

a) Cable Modem Termination System b) Cable Methods Termination System

c) Both a & b d) None of these

15. _________ is a new generation broad band Internet access technology allowing the delivery of high

speed wireless Internet within a large area.

a) World wide web b) Ethernet c) Wireless Broad band d) None of these

16. ISDN stands for _________.

a) Internet Services Digital Network b) Integrated Services Digital Network c) None d) a & b

17. Www stands for __________.

a) World wide web b) World worth web c) None d) a and b

18. URL stands for ___________.

a) Uniform Resource Locator b) Universal Resource Locator c) a & b d) None of these

19. Wi-Fi stands for _________.

a) Wired Fidelity b) Wireless Fidelity c) None of these d) Both a & b

20. Regular Ethernet speeds upto __________.

a) 10 mbits/s b) 20mbits/s c) 5 mbits/s d) None of these

21. Fast Ethernet speeds of upto ________.

a) 100 mbit/s b) 50 mbit/s c) 200 mbit/s d) None of these

22. Gigabit Ethernet supporting speed of upto ________.

a) 2 gbit/s b) 5 gbit/s c) 1 gbit/s d) None of these

23. 10 Gbit Ethernet, coming at up to __________.

a) 100 gbit/s b) 10 gbit/s c) 30 gbit/s d) None of these

24. World wide web is not a __________.

a) Internet b) Web browser c) None of these d) Both a and b

25. ________ helped found, the World Wide Web consortium.

a) Time Berners-Lee b) Charles Babbage c) None of these d) Harvey


Answers


1 A 2 C 3 A 4 A 5 D

6 B 7 A 8 A 9 B 10 B

11 C 12 A 13 B 14 A 15 C

16 B 17 A 18 C 19 B 20 A

21 A 22 A 23 B 24 A 25 A


UNIT- IV- PHOTOSHOP

1. _________ DPI is necessary for asic 1 to 1 printing.

a) 200 b) 300 c) 400 d) 100

2. To resize the image in Photoshop, click ________ menu.

a) File b) View c) Edit d) Layer

3. A simple technique to enhance the colors of your image is making it ________ and ________.

a) Vivid b) Alive c) both a & b c) Natural

4. The image in Photoshop is retouched by using ___________ modes.

a) Blur b) Sharp c) Strong d) Layer Blending

5. ________ tool is used for selecting pixels.

a) Clone tools b) Text tools c) Selection tool d) None of the above

6. _________ tool paint on pixels with the foreground color.

a) Shape tool b) Zoom tool c) History Brush d) Brush tool

7. To get Desaturate option in Photoshop, we have to go to ________.

a) File Menu b) Layer Menu c) Image>Adjustment d) None of the above

8. To get Auto contrast option in Photoshop, select ________.

a) Filter Menu b) Image>Adjustment c) File Menu d) None of the above

9. How many Color Modes are there in Photoshop?

a) Five b) One c) Three d) None of these

10. Is Overlay a Layer Blending Mode in Photoshop?

a) Yes b) No c) Partial d) Non- partial

11. We can find Variation option under _________ menu in Photoshop.

a) Filter b) Blend c) Layer d) View

12. __________ does not support background transparency.

a) GIF b) JPEG c) TIFF d) None of these

13. _________ Graphic consists of Pixels.

a) Raster b) Vector c) Static d) None of these

14. Liquify is a Filter?

a) True b) False c) Partial d) None of these

15. The short cut key of Feather is ___________.

a) Alt + Ctrl + F b) Alt + Ctrl + G c) Alt + Ctrl + I d) None of these

16. How many types of Gradient are there in Photoshop?

a) Five b) Two c) Six d) Three


17. How many type of Marquee Tool are there in Photoshop?

a) Seven b) One c) Four d) Two

18. Blurs edges by building a transition boundary between the selection and its surrounding pixels is known

as ___________.

a) Anti-aliasing b) Feathering c) Healing d) None of the above

19. By default how many channel Indexed color images are there?

a) One Channel b) 255 Channel c) 216 Channel d) 256 Channel

20. In Photoshop, maximum how many alpha channels can create in an image?

a) 20 b) 22 c) 24 d) 26

21. Which command selects a specified color or color subset within an existing selection or an entire image?

a) Replace Color b) Color Range c) Selective Color d) None of these

22. How many maximum steps we can undo in Photoshop?

a) 10 b) 100 c) 1000 d) 10000

23. How many selection tools are there in Photoshop?

a) 8 b) 4 c) 9 d) 2

24. Which one is the range of colors that a color system can display or print?

a) The Gamut b) Color Mode c) Ditherinng d) None of these

25. Which one lets you isolate and protect areas of an image as you apply color changes, filters or other

effects to the rest of the image?

a) Mask b) Image Matte c) Opacity d) None of these

Answers


1 B 2 C 3 C 4 D 5 C

6 D 7 B 8 B 9 A 10 A

11 A 12 D 13 A 14 B 15 A

16 D 17 B 18 B 19 D 20 C

21 B 22 B 23 A 24 B 25 A


UNIT – II , III & V

1. HTML means _________.

a) Hyper Text Markup Language b) Hypertext Makeup Language

c) Homotext Makeup Language d) Homotest Markup Language

2. Tags are surrounded by _________.

a) { } b) [ ] c) ( ) d) < >

3. Closing tag is prefixed by ___________ symbol .

a) < b) _ c) / d) *

4. The advanced version of HTML is ___________.

a) HTML 3+ b) HTML 3 c) HTML 4+ d) HTML 4

5. _________ is an empty tag.

a) b b) br c) I d) p

6. The text between <html> and </html> describes the _________.

a) page b) web page c) web site d) program

7. _________ tag scrolls the text.

a) Marquee b) b c) u d) h1

8. There are _________ heading tags

a) 8 b) 5 c) 4 d) 6

9. “#990000” represents _________ color.

a) White b) Black c) Red d) Rose

10. Font face refers to _________.

a) Font size b) Font color c) Font style d) Attribute

11. Color is represented by _________ digit.

a)Decimal b) Hexa decimal c) Octal d) Unique

12. <b> … </b> tag makes the text _________.

a) Italic b) Colored c) Bold d) Underline

13. URL means _________.

a) Unique Resource Locator b) Uniform Research Locator

c) Unique Research Location d) Uniform Resource Locator

14. <sup>..</sup> refers to _________.

a) Super script b) Sub script c) Super text d) Sub text

15. HTML program are typed in ___________ .

a) Wordpad b) IE c) Notepad d) MS Word


16. <p> tag refers to ___________.

a) Text b) Paragraph c) Plain text d) None of these

17. For _________ tag the closing tag is optional.

a) <h> b) <p> c) <i> d) <l>

18. HTML elements with no content are called _________.

a) Empty tags b) No content tag c) Html tag d) Heading tags

19. Name some browsers____________.

a) Google b) Internet Explorer c) Opera d) All the above

20. <sub>..</sub> refers to _________.

a) Super script b) Sub script c) Super text d) Sub text

21. <tt> refer to _________.

a) Tele text b) Text 2 text c) Tele type mode d) Tele mode

22. _________ tag is used for linking web pages.

a) <p> b) <a> c) <b> d) tt

23. Dimensions of image are measured in _________.

a) Points b) KB c) Pixels d) Colors

24. Bg and background color are _________.

a) Same b) Not same c) Equal d) None of these

25. Lists are of _________ types.

a) 5 b) 3 c) 2 d) 4

26. li refers to _________.

a) List order b) List item c) List d) Bullets

27. <td> refers to _________.

a) Table data b) Table row c) Table d) Data

28. Code for black color is _________.

a) #000001 b) #001000 c) #009870 d) #000000

29. The _________ consortium is making the web standards

a) World wide web b) Global c) Network d) World

30. _________ is the largest heading tag.

a) h1 b) h2 c) h3 d) h4

31. ISDN means _________.

a) Internal Services Digital Network b) Integrated Services Digital Network

c) Integrated Sustainable Digital Network d) Internal Sustainable Digital Network


32. Expansion of LAN is _________.

a) Local Auto Network b) Line Automatic Network c) Local Area Network d) Line Auto Neuron

33. _________ is used to upload or download images.

a) FTP b) SMTP c) URL d) IP

34. _________ protocol is used in Mail Transfer.

a) FTP b) SMTP c) URL d) IP

35. Expansion of WWW is _________.

a) World Wide Web b) Web World Wide c) World Web Wide d) Wide Web World

36. _________ are two attributes of img tag.

a) src, alt b) src, color c) alt, size d) alt, source

37. FTP means _________.

a) File Transfer Protocol b) Folio Transfer Protocol

c) File Transmit Protocol d) Folio Transmit Protocol

38. _________ gives additional information about the tags.

a) Attributes b) Heading c) Color d) Meta

39. <hr> tag inserts _________.

a) A line b) A symbol c) A break d) None of these

40. In a program the usage of heading tags are limited upto _________.

a) 6 b) 5 c) 4 d) 3

41. The common element which describes the webpage is ___________.

a) Heading b) Paragraph c) List d) All of these

42. Which tag is used for descriptive lists?

a) <LL> b) <DD> c) <DL> d) <DS>

43. HTML tag for largest heading is ___________.

a) <h1> b) <h2> c) <h3> d) <h4>

44. The attribute of <form> tag is/are __________.

a) Method b) Action c) Both a and b d) None

45. Which of the following attributes of text box control to limit the maximum character?

a) Size b) Len c) Maxlength d) All of these

46. HTML is the subset of _______.

a) SGMT b) SGML c) SGMD d) None

47. Correct HTML code to left align the content inside a table cell ____.

a) <tdleft> b) <td raligh=”left”> c) td align=”left”> d) <td leftalign>


48. The body tag is used only after __________.

a) Title tag b) Hrad tag c) EM tag d) Form tag

49. Symbol used at the beginning of the HREF text is _______.

a) # b) $ c) & d) ^

50. The webstandard allows the programmers on many different computers to dispersed format and display

the information server. These programs are called ______.

a) Web Browsers b) HTML c) Internet Explorer d) None

51. To create HTML page, you need_________.

a) Web browser b) Text editor c) Both (a) and (b) d) None

52. Adding a border to your image helps the visitor to recognize it as what?

a) A frame b) A link c) A picture d) None

53. The first tag inside <TABLE> tag is _________.

a) <head> b) <caption> c) TH> d) TD>

54. WYSIWYG stands for ___________.

a) What You See Is What You Get b) What You See Is What You Gain

c) When You Start Is When You Go d) None

55. Which tag tells the browser where the page starts and stops?

a) <html> b) <body> c) <head> d) <title>

56. How can you make a numbered list?

a) <ol> b) <ul> c) <li> d) <dl>

57. How can you create a bulleted list?

a) <ol> b) <ul> c) <li> d) <dl>

58. What is the correct HTML for making a checkbox?

a) <checkbox> b) <input type="checkbox"> c) <input type=”check”> d) None

59. Which of the following is an attribute of <table> tag?

a) SRC b) LINK c) CELLPADDING d) BOLD

60. Which HTML tag would be used to display power in expression (A+B)2?

a) <SUP> b) <SUB> c) <P> d) <B>

61. Output of HTML code can be seen in_________.

a) Word Processor b) Web Browser c) Notepad d) Document

62. _________ is an example of browser.

a) Word b) Powerpoint c) Firefox d) Paint


63. _________ divide a browser window into several panes.

a) Editors b) Frames c) Tables d) List

64. Each pane contains _________ document.

a) XHTML b) HTML c) Both a or b d) None

65. A collection of frames in the browser window is called __________.

a) Frames b) Frameset c) Browser d) Table

66. The frameset tag replaces __________ tag in the frameset documents.

a) Frames b) Body c) Head d) None of these

67. The _________ defines how to divide the window into frames.

a) Table b) Frameset c) Frames d) None of these

68. If you specify rows in frameset tag _________ frames are created.

a) Horizontal b) Vertical c) Central d) Middle

69. If you specify columns in frameset tag __________ frames are created.

a) Horizontal b) Vertical c) Central d) Middle

70. The value of ________ indicate the amount of screen are occupied.

a)Rows b) Columns c) a or b d) None

71. Each frame is indicated by _________ tag.

a) <table> b) <frameset> c) <frames> d) <list>

72. Tables with tabular data mainly has _________ row/column.

a) Header b) Heading c) Tabular d) Strong

73. The __________ in table are displayed in bold text.

a)Columns b) Rows c) Headers d) Table

74. Unordred lists are also called __________ list.

a) Unnumbered b) Bulleted c) Both a and b d) None of these

75. Unordered list are created using __________ tag.

a) <ol> b) <ul> c) <li> d) None of these

76. List item are defined by __________.

a) <ol> b) <ul> c) <li> d) None of these

77. To prevent the background image from repeating use _________ option.

a) No-repeat b) Repeat-x c) Repeat-y d) None of these

78. To repeat the image horizontally, use ___________.



79. To repeat the image vertically, use ___________.


80. ___________ element is used to select user information.

a) Method b) <input> c) Post d) Get

81. For getting text as input, use input type as __________.

a) Text b) Password c) Radio button d) Check box

82. For getting password, the input type is given as __________.

a)Text b) Password c) Radio button d) Check box

83. Input type tag is used mainly inside __________.

a)Tables b) Methods c) Forms d) Frames

84. For using radio button, input type is specified as __________.

a) Check box b) Radio c) Forms d) Submit button

85. While using check boxes, the user can select _________ or ________ choices.

a) Zero b) More than one c) a and b d) None

86. While using radio buttons, user can select ________ of the choices.

a) Zero b) More Than One c) Only One d) None of these

87. _________ button is used to send the information to the server.

a) Radio button b) Check boxes c) Submit button d) None of these

88. Unordered List are also called as _________.

a) Numbered list b) Bulleted list c) Ordered list d) None of these

89. Purpose of HTML action, attribute is to specify the ________ of a form processor.

a) URL b) HTTP c) FTP d) None of these

90. The ________ attribute tells the server how to submit the information.

a) Post b) Get c) Method d) None of these

91. Two types of methods are ________ and ________.

a) Post b) Get c) Both a and b d) Either a or b

92. The ________ method sends the information to the server in one step.

a) Post b) Get c) Both a and b d) None of these

93. _________ methods are useful if you want to call a CGI from a link.


94. While using _________ method, the data is not shown inside the URL.



95. ________ method has no size limitations.


96. Forms that are submitted using _________ method cannot be book marked.


97.Expansion of WYSIWYG is ________.

a) What You See Is What You Get b) What You Sow Is What You Get

c) What You Sow Is What You Give d) What You See Is What You Give

98. WYSIWYG technique is used in _______.

a) MS-Outlook b) MS- Frontpage c) MS-Office d) HTML

99. _________ hides the codes from the user.

a) MS-Outlook b) MS- Frontpage c) MS-Office d) HTML

100. CSS stands for __________.

a) Cascading style sheet b) Cascading sheet style

c) Catalogue Style sheet d) Computer Style sheet

101. _________ files allow you to separate your website content from its style.

a) CSS b) HTML c) XML d) SGML

102. A _________ is a set of instructions that tells the Web browser how to display different HTML

elements.

a) CSS b) HTML c) XML d) SGML

103. You can use ________ style sheets to customize the display of your web site for different browsers.

a) Multiple b) Only one c) None d) Different

104. Using CSS you can create, __________.

a) Text roll overs b) Control the graphics c) Special effects d) All of these

105. In early days of WWW, style and content both were controlled by _________.

a) CSS b) HTML tags c) Both a and b d) None of these

106. Using _________ you can create default styles and manage them all from one place.


107. CSS makes ___________.

a) Designing b) Maintaining c) Updating d) All of these

108. _______ saves time.

a) CSS b) Style c) Tags d) None of these

109. With CSS, you have to specify _________ times for any element.

a) Once b) Twice c) Thrice d) Multiple times

110. __________ will automatically apply the specified styles whenever that element occurs.


111. Features of CSS is/are _______.

a) Webpages loads faster b) Easy maintenance c) a and b d) None of these

112. CSS doesn’t have __________.

a) Superior styles b) Browser compatibility c) Attributes d) None of these

113. ________ styles are placed inside the <head> of the HTML document.

a) Internal b) External c) Inline d) None of these

114. _________ styles cannot be referenced by any other Web document.


115. ______ style sheet affect the page they are on.


116. Internal style sheet uses _________ and _________.

a) Classes b) IDs c) None d) Both a and b

117. Which style sheets have higher precedence?

a) External b) Internal c) Both d) None of these

118. _________ style sheets are cached by browsers .


119. ________ style sheets increase page load times.


120. The syntax used for style sheet is __________.

a)  b) < > c) !--! d) -- --

121. An external CSS can be created with _________.

a) Notepad b) Dreamweaver c) HTML editor software d) All of these

122. _________ tag is used for external style sheet.

a) Link b) p c) h d) Bold

123. By using _________ style sheet, all your HTML file link to one CSS.


124. How many files are there in external style sheet?

a) 2 b) 1 c) 6 d) 4

125. _________ styles are plunked straight into the HTML tags using the style attribute.

a) External b) Internal c) Inline d) None of these


126. Internal styles are also called _________ styles.

a) External b) Embedded c) Inline d) HTML

127. ________ styles are used for the multiple pages website.


128._________ symbol comes before the name of the class.

a) dot b) # c) $ d) !

129. The syntax for defining the class name is ___________.

a) .redfont b) #redfont c) $redfont d) !redfont

130. SPAN is __________ tag.


131. SPAN tag are used as __________.

a) Coding element b) Block level element c) Both d) None of these

132. With CSS, a color is most often specified by _________.

a) A HEX Value b) An RGB value c) A color name d) All of these

133. The __________ property is used to set or remove decorations from text.

a) Text-bold b) Text-strong c) Text-decoration d) None of these

134. The ___________ property is used to specify uppercase and lowercase letters in a text.

a) Text-decoration b) Text c) Text-transform d) All of these

135. The __________ property is used to specify the indentation of the first line of a text.

a) Text-decoration b) Text-indentation c) Text-transform d) All of these

136. To increase or decrease the brush size _________ is used.

a) { } b) < > c) [ ] d) /

137. To increase or decrease the softness of brush _________ is used.

a) { } b) < > c) [ ] d) Shift + [, Shift + ]

138. Shortcut for Airbrush tool _______.

a) Ctrl + P b) Alt + Shift + P c) Alt + P d) Shift + P

140. The ____________ key is used as shortcut key for Quick Mass mode.

a) A b) B c) Q d) X


Answers


1 A 2 D 3 C 4 C 5 B

6 B 7 A 8 D 9 C 10 C

11 B 12 C 13 D 14 A 15 C

16 B 17 B 18 A 19 B 20 B

21 D 22 B 23 C 24 B 25 C

26 B 27 A 28 D 29 A 30 A

31 B 32 C 33 A 34 A 35 A

36 A 37 A 38 A 39 A 40 D

41 D 42 C 43 A 44 C 45 C

46 B 47 C 48 A 49 A 50 A

51 C 52 C 53 C 54 A 55 A

56 A 57 B 58 B 59 C 60 C

61 B 62 C 63 B 64 C 65 B

66 B 67 B 68 A 69 B 70 C

71 C 72 A 73 C 74 B 75 B

76 C 77 A 78 B 79 C 80 B

81 A 82 B 83 C 84 B 85 C

86 C 87 C 88 B 89 A 90 B

91 C 92 B 93 B 94 A 95 A

96 A 97 A 98 B 99 A 100 B

101 A 102 A 103 A 104 A 105 B

106 A 107 D 108 A 109 A 110 A

111 A 112 A 113 B 114 B 115 B

116 A 117 D 118 A 119 A 120 A

121 C 122 B 123 A 124 A 125 A

126 D 127 B 128 B 129 A 130 D

131 A 132 A 133 A 134 A 135 A

136 A 137 D 138 A 139 A 140 B


Annexure V h – Question Bank – Certificate in 2D Animation

IECD



Certificate in 2D Animation

Course Code –TDA01

UNIT - I - BASIC DRAWING

1. What are the most basic shapes to draw a pencil?

a) Triangle and circle b) Triangle and square c) Triangle and rectangle d) Triangle and octagon

2. In running animation ________ shape to create the body.

a) Circle b) Rectangle c) Triangle d) Square

3. Choose the basic shapes in drawing ________.

a) Circle, triangle and square b) Circle, cylinder and triangle

c) Square, circle, rectangle d) None of the above

4. Draw a ________ shape to form the outer edge of the flower leaves.

a) Rectangle b) Octagon c) Oval d) Pentagon

5. How many circles are required to draw body shape of the human picture in first stage?

a) 9 b) 8 c) 7 d) 20

6. 2D stands for _________.

a) Two Degree b) Two Dimensional c) Twitter Dimensional d) None of the above

7. How many circles are required to draw shoulders and chest in human body?

a) 4 b) 6 c) 5 d) 3

8. In a ________ walk, you go up and down twice in each step.

a) Single bounce b) Four bounce c) Double bounce d) Triple bounce

9. Basic shapes are the ________ dimensional.

a) Two b) Three c) One d) None

10. In Clampet’s cartoons always ________ walk in double bounce.

a) Mickey b) Mouse c) Porky Pig d) Tom

11. How many triangles are required to draw children figure in first stage?

a) 9 b) 1 c) 17 d) 22

12. Looking for the ________ shapes is a great way to simplify the structure of the subject in drawings.


a) Circle b) Rectangle c) Flat d) Pentagon

13. To illustrate each arm, add ________ in cartoon running.

a) Two rectangle and one circle b) One rectangle and one circle

c) Three rectangle and one circle d) None of the above

14. ________ is used to select an object by drawing a rectangle around it.

a) Rectangle b) Marquee c) Lasso d) Magic wand

15. How many basic shapes in drawing?

a) 4 b) 5 c) 6 d) 3

16. Two ________ lines are required to draw a flower?

a) Horizontal b) Parallel c) Scalar d) None of the above

17. How many triangles are required to draw children figure in first stage?

a) 2 b) 3 c) 1 d) 20

18. Shortcut for increase brush size _______

a) J b) + c) – d) Ctrl + J

19. Which step to erase the guideline in sneaks?

a) Step 1 b) Step 6 c) Step 2 d) Step 5

20. ________ Cartoons always walks double dance.

a) Mickey b) Tom c) Mouse d) None of the above

21. To illustrate each arm, add _______in cartoon running.

a) Two rectangles and one circle b) Three rectangles and one circle

c) One rectangles and one circle d) None of the above

22. Which file format supports transparency in a Web browser?

a) JPEG b) PSD c) GIF d) TIFF

23. Choose the basic shapes in drawing____________.

a) Circle, Triangle, and Square b) Circle, Cylinder, and Triangle

c) Square, Circle, Rectangle d) None of the above

24. Which shortcut key is used for Remove Transform?

a) Ctrl+Shift+R b) Ctrl+UpArrow c) Ctrl+Shift+Z d) Ctrl+Shift+A

25. You want to display an on-screen preview of how your RGB document will look when produced in CMYK.

Which should you choose to specify the device to simulate?

a) View>Proof Setup b) View>Proof Colors

c) Image>Mode>CMYK Color d) Image>Mode>Multichannel


Answers


1 C 2 B 3 A 4 C 5 B

6 B 7 D 8 C 9 A 10 C

11 B 12 C 13 A 14 B 15 B

16 B 17 B 18 B 19 B 20 D

21 A 22 C 23 A 24 C 25 A


UNIT II - PHOTOSHOP

1. We should start working in ________ in Photoshop

a) Foreground color b) Create new layer c) Background colour d) None

2. The HEX value for dull green is ________.

a) 36446 b) 36442a c) 36443c d) 36442d

3. You can fill the background color by ________ anywhere in your working image area.

a) Dragging b) Paint c) Clicking d) None

4. To create a new layer, click the ________ icon.

a) New group b) New channel c) New path d) New layer

5. You can rename the layer, by clicking the name of it ________.

a) Once b) Twice c) Thrice d) None

6. While this layer is ________, you will be working on this layer alone in Photoshop document.

a) Clicked b) Selected c) Highlighted d) Both b & c

7. Select the brush tool from the ________.

a) Menu bar b) Image c) Tool box d) Window

8. Adobe Photoshop already has a preset brush called ________.

a) Line b) Grass c) Dune grass d) Leaf

9. Brush tool’s option bar has a ________.

a) Dune grass b) Brush preset picker c) Brushes d) None

10. HEX value for green is ________.

a) #19250f b) #19255f c) #18255c d) #17255c

11. ________ down the mouse button to use the brush tool.

a) Hold b) Select c) Drag d) None

12. To add some text to the layer we have to click the ________.

a) Type tool b) Horizontal type tool c) Brush tool d) Marquee tool

13. ________ tool will create a new layer itself.

a) Brush b) Marquee c) Type d) Erase

14. To create a new layer click new layer icon or click ________.

a) Ctrl + Alt b) Ctrl + Delete c) Alt + Delete d) Ctrl + Enter

15. To ________ a layer, click and drag the layer you want to move.

a) Select b) Type c) Move d) Create


16. To deselect press ________.

a) Ctrl + D b) Alt + D c) Ctrl + Enter d) Alt + Enter

17. To create a duplicate layer ________ the layer.

a) Left click b) Right click c) Drag d) Select

18. By setting the opacity to something ________ 100% we are able to see through objects.

a) Above 100% b) Below 100% c) Above 200% d) Below 150%

19. Groups function in a similar manner to a ________.

a) Layer b) File c) Folder d) Disc

20. You can put multiple layers inside of a ________.

a) Layer b) Group c) Folder d) File

21. Effects can be added to individual layers in ________.

a) C b) C++ c) Flash d) Photoshop

22. The combination of effects on any layer is called its ________.

a) Layer change b) Layer style c) Image style d) None

23. Layer styles are special effects that can be ________ and easily applied to individual layers.

a) Slow b) Quick c) Medium d) None

24. To select the styles palette ________.

a) Window -> styles b) Styles -> window c) Windows -> styles d) Menu -> styles

25. After applying a layer style, the effects in the can be seen, adjusted, disabled or enabled from the _______.

a) Layer style b)Layer palette c) Layer change d)Layer

Answers


1 C 2 B 3 C 4 D 5 B

6 D 7 C 8 C 9 B 10 A

11 A 12 B 13 C 14 D 15 C

16 A 17 B 18 B 19 C 20 B

21 D 22 B 23 B 24 A 25 B


UNIT III - ADVANCED PHOTOSHOP

1. ________ appears when placed into another application or combined with another image.

a) Layer mask b) Clipping mask c) Vector mask d) None

2. ________ is a way to apply something to a very specific portion of an image.

a) Mask b) Layer c) Pen tool d) All the above

3. A ________ gives you more precise controls over very specific areas.

a) Pen tool b) Mask c) Layer d) None

4. How many types of masks?

a) 4 b) 3 c) 2 d) 5

5. A ________ is something that you apply to a given layer to control the transparency of that layer.

a) Layer mask b) Vector mask c) Clipping mask d) All the above

6. The quick way to turn it on and off is to press ________.

a) Ctrl + , b) Ctrl + ’ c) Ctrl + & d) None

7. For grid view, we have to go to ________.

a) View > grid b) Insert > grid c) Insert > table d) Both a & b

8. In Photoshop C is ________.

a) Cyan b) Black c) Violet d)Red

9. In Photoshop M is ________.

a) Magenta b) Blue c) Green d) None

10. Colour of green text ________.

a) 00550A b) 00A550 c) OOC550 d) 00D550

11. Colour of pink text ________.

a) FF5AAF b) BB6CC4 c) 00A550 d) CC3300

12. Red colour of background ________.

a) FF5AAF b) 00A550 c) CC3300 d) All of the above

13. The ________ has less contrast.

a) Background b) Foreground c) Both a & b d) None

14. ________ tool to select a color from the Photoshop.

a) Pen b) Slice c) Move d) Eyedropper

15. There are ________ ways to add shapes.

a) 1 b) 2 c) 3 d) 4


16. If you select the text, you can replace the text color with a ________ or a ________.

a) Gradient b) Photoshop c) Photograph d) Both a & c

17. Click the ________ icon in the type layer for the text.

a) T b) A c) C d) F

18. The rounded rectangle shape, with a radius of ________ px.

a) 15 px b) 10 px c) 20 px d) 5 px

19. Select a gradient from the ________.

a) Gradient picker b) Gradient dropper c) Move tool d) None

20. We can use the ________ to place a shape behind the text.

a) Outliner b) Slice c) Shape tools d) None

21. ________ determines the roundness of any curves.

a) Radius b) Diameter c) Circumference d) Area

22. Press and hold ________ to drag out a squares or a circle.

a) Ctrl b) Space c) Shift d) Both a & b

23. The ________ change the size of the selection without changing its shapes.

a) Corner handles b) Left handles c) Centre handles d) Right handles

24. ________ can be one of tone or color.

a) Contract b) Contrast c) Relax d) None

25. ________ are non destructive and always give you a way out.

a) Vector mask b) Layer mask c) Clipping mask d) Both a & b

Answers


1 B 2 A 3 B 4 B 5 A

6 B 7 A 8 A 9 A 10 B

11 A 12 C 13 A 14 D 15 B

16 D 17 A 18 B 19 A 20 C

21 A 22 C 23 A 24 B 25 C


UNIT IV - FLASH

1. ________ is an incredibly powerful program that has seemingly endless potential.

a) Flash b) Photoshop c) CorelDraw d) None

2. The ______ is the main workspace of Flash that all compositional elements will be arranged here.

a) Stage b) Timeline c) Properties d) Library

3. The ________ tool in Flash allows creating and modifying shapes for the art work in movies.

a) Drawing b) Lasso c) Line d) None

4. FPS stands for ________.

a) Frames Per Second b) Frames Picture Second c) Frames Auto Second d) None

5. The frame rate should be left at ________ fps for fluid motion.

a) 10 – 12 b) 24 – 30 c) 40 – 50 d) none

6. The ________ page allows the adjustment of the size and color of the stage.

a) Property b) Stage c) Frame d) Library

7. The ________ determines the output size of the movie.

a) Stage b)Library c) Frame d) None

8. The ________ key is used to convert the object into a movie clip symbol.

a) F8 b) F7 c) F2 d) None

9. ________ shortcut is used to break apart the objects.

a) Ctrl + A b) Ctrl + B c) Ctrl + C d) Ctrl + D

10. ________ shortcut is used to open the properties panel.

a) Ctrl + F3 b) Ctrl + F1 c) Ctrl + F2 d) None

11. A ________ is a graphic, button or movie clip that is created manually in Adobe Flash Professional & by

using button.

a) Symbol b) Picture c) Image d) None

12. A ________ in Adobe Flash Professional is an animation that is created by specifying a value for an object

property in one key frame and another value for that same property in another key frame.

a) Tween b) Span c) Shape tween d) None

13. A ________ is a group of frames in the Timeline located between the beginning and ending keyframes of a

tween?

a) Motion tween b) Shape tween c) Tween span d) None

14. ________ layers are used to show and hide parts of the content in a Flash presentation.

a) Mask b) Guide c) Tween d) None


15. SWF stands for ________.

a) Shock Wave Format b) Style Wave Format c) Symbolic Wave Format d) None

16. ________ is the shortcut key for test movie in flash.

a) Ctrl + Enter b) Ctrl + D c) Ctrl + T d) Ctrl + M

17. Adobe Flash is ________ based graphics tool.

a) Vector b) Pixel c) Dots d) Algorithm

18. ________ is the shortcut key getting library window.

a) Ctrl + L b) Ctrl + C c) Ctrl + I d) None

19. ________ are symbols that contain few frames.

a) Graphics b) Images c) Buttons d) None

20. To open the actions panel, choose ________.

a) Window -> action b) Window -> script c) F7 d) None

21. Adobe Flash is an authoring tool that you can use to create ________.

a) Presentation b) Movie clip

c) Animated presentations, applications and other content that responds d) None

22. Action script allows you to add ________ to the elements in your application.

a) Usability b) Image c) Animation d) Interactivity

23. Which of the following tool is used to edit the animation?

a) Commands b) Symbols c) Scripts d) Action

24. Only ________ are editable.

a) Insert frames b) Keyframes c) Blank key frames d) None

25. ________ key is pressed to select selection tool.

a) D b) V c) B d) none

Answers


1 A 2 A 3 A 4 A 5 B

6 A 7 A 8 A 9 B 10 A

11 A 12 A 13 C 14 A 15 A

16 A 17 A 18 A 19 C 20 A

21 C 22 D 23 A 24 B 25 B


UNIT V - ADVANCED FLASH

1. ________ is an object oriented scripting language based on ECMA.

a) Action script b) Oops c) Script d) Commands

2. ECMA is an abbreviation of ________.

a) European Computer Manufacturer Association b)Encrypted command manufacturer association

c) Encrypted common manufacturer association d)None of the above

3. The most popular software which benefits from the action script implementations is ________.

a) Photoshop b) Flash c) Maya d) Illustrator

4. An ________ which is defined by a class can use all the methods for the class.

a) Variables b) Constants c) Objects d) None

5. ________ are functions which apply a defined behavior for the objects of the class.

a)Methods b) Operations c) Attributes d) None

6. An ________ which is defined by a class can use all the methods for this class.

a) Object b) Class c) Method d) None

7. The ________ programming language is case sensitive.

a) BASIC b) QBASIC c) Action script d) None

8. ________ organize a movie into categories.

a) Scenes b) Actions c) Frames d) None

9. To add a scene in the movie, click ________.

a) Insert -> scene b) Insert ->scene c)Tools -> scene d)Add-> scene

10. To delete a scene, click ________.

a) Insert -> remove scene b)Remove scene c)Delete scene d)None

11. ________ is the shortcut to apply the free transform on the object.

a) Ctrl + T b) Ctrl + U c) Ctrl + F d) None

12. The ________ component is used to control a SWF / Movie Clip being played in Flash lite

a) Movie controller b) Library c) Control d) None

13. __________ attribute represents the movie clip to be controlled using the slides.

a)Timeline to control b) Notch color c) Bar color d) None

14. ________ denotes the color of the slider bar.

a)Slider bar b) Notch color c) Bar color d) None

15. ________ is used to control the looping behavior of the controlled movie clip.

a)Continuous looping b) Length c) Progress indicator d) None


16. ________ denotes the color that is used to indicate the progress.

a) Progress indicator b) Bar color c) Automatic play d) None

17. ________ is the shortcut key for cut Reshadow.

a) Ctrl + X b) Ctrl + V c) Ctrl + C d) Ctrl + E

18. ________ is the shortcut key for the paste the shadow.

a) Ctrl + Shift + U b) Ctrl + L c) Ctrl + R d) None

19. The default resolution of the image output ________.

a) 72 b) 144 c) 128 d) None

20. ________ toggles whether to apply something to the edges of the image output.

a)Smooth b) Colors c) Width d) Height

21. The ________ format is a graphic interchange file format for the flash platform.

a)FXG b) FLV c) MXML d) Mov

22. ________ is based on subset of MXML.

a)FLV b) FXG c) XML d) None

23. ________ can import FLV video and export FLV & Quick Time (mov)

a) Photoshop b) Flash c) Quicktime d) None

24. ________ allows you to create either an actionscript or actionscript 3.

a)Flash CS4 b) Flash CS3 c) Flash CS2 d) None

25. In ________ event listeners and handlers are used to control interactions.

a)Action script b) Fs command c) Movie d) None

Answers


1 A 2 A 3 B 4 C 5 A

6 A 7 C 8 A 9 A 10 A

11 A 12 A 13 A 14 C 15 A

16 A 17 A 18 A 19 A 20 A

21 A 22 B 23 B 24 B 25 A

iecd institute for entrepreneurship and career development ... · annexure v a – question bank...

Documents