iec61508 spriano technologies · 2016. 5. 25. · functional safety according to iec 61508 / iec...
TRANSCRIPT
Certi cate registration No. 70 900 3989
Audit report No. 4271 7360 First certi cation 2013-11-26
Certi cate valid from 2014-03-14 to 2016-11-25
scope:
PAGE 1 OF 1. This certi cation was conducted in accordance with the TÜV PROFiCERT-plus auditing and certi cation procedures and is subject to
regular surveillance audits. Veri able under www.tuev-club.de. Original certi cates contain a glued on hologram.TÜV Technische Überwachung Hessen GmbH, Rüdesheimer Str. 119, D-64285 Darmstadt, Tel. +49 6151/600331 Rev-GB-1301
Darmstadt, 2014-03-14Certi cation body of TÜV Hessen
– Head of Certi cation body –
IEC 61508(Functional safety of electrical/electronic/programmable electronic safety-related systems)
for
By means of periodical audits it is assured, that the inspection process assures the product/service conformity including all requirements therefor. This certi cate does not acquit the company of its responsibility for the compliance with all legal requirements and service properties.
Compliance of smart level transmitters: SST50 - SST70.Compliance of smart pressure transmitters: SST56 - SST76.
Compliance of smart temperature transmitters: SST52 - SST72. Compliance of smart di$ erential pressure transmitters: SST57B - SST77B.
(ref. Report n° 37169-R rev. 01)
Scope: 18; 29/1
SPRIANO TECHNOLOGIES s.r.l.Registered O& ce: Via Rosso Medardo, 16, I - 20159 Milano
Operating Site: Via Gramsci, 1, I - 26827 Terranova dei Passerini (LO)
SPRIANO® Technologies Srl SIL DECLARATION OF CONFORMITY
DCS-SST5X
ED03 14/09/15
SPRIANO® TECHNOLOGIES SRL - www.spriano.it - [email protected] Factory & Sales: Via Gramsci 1 - 26827 Terranova Passerini (LO) - Ph:+39 0377 919119 Fax: +39 0377 855720 Head office: Via Rosso Medardo 16 - 20159 Milano, Italy – VAT: IT02771740129
Pag.1
/1
SIL DECLARATION OF CONFORMITY
SPRIANO Technologies Srl Via Gramsci 1 - 26827 - Terranova dei Passerini (LO) - Italy
under our sole responsibility
Electronic Pressure and Level Transmitters series:
SST50 – SST52 – SST56 – SST57B/BL
Functional safety according to IEC 61508 / IEC 61511
We as the manufacturer declare that are suitable for the use in a safety related application up to SIL3 and up to SIL2 for SST52 according to IEC 61511-1, provided that the attached safety instructions are
observed. The assessment of the safety critical and dangerous random errors results, in case of an annual function test in the following parameters.
SIL (Safety Integrity Level): 3 & 2 (according to table)
HFT (Hardware Failure Tolerance): 0
TRANSMITTER TYPE
SFF PFDav λdd λdu λs λtot DC SIL
SST50 90.24 % 6.39 x 10-7 2.18 x 10-10 7.27 x 10-11 4.55 x 10-10 5.5 x 10-8 75% 3 SST52 80.65 % 24.4 x 10-4 2.23 x 10-6 1.34 x 10-6 3.35 x 10-6 9.16 x 10-6 63% 2 SST56 93.55 % 4.28 x 10-7 3.42 x 10-10 4.87 x 10-11 3.66 x 10-10 4.1 x 10-8 88% 3 SST57B
90.24 % 6.98 x 10-4 2.59 x 10-7 7.96 x 10-8 4.78 x 10-7 9.16 x 10-7 76% 3 SST57BL
Certified under: TUV PROFIT CERT Certificates N°: 70 900 3989
Terranova dei Passerini, Legal representative 14/09/2015 Sergio Valletti
Managing Director
SPRIANO® Technologies Srl SIL DECLARATION OF CONFORMITY
DCS-SST7X
ED03 14/09/15
SPRIANO® TECHNOLOGIES SRL - www.spriano.it - [email protected] Factory & Sales: Via Gramsci 1 - 26827 Terranova Passerini (LO) - Ph:+39 0377 919119 Fax: +39 0377 855720 Head office: Via Rosso Medardo 16 - 20159 Milano, Italy – VAT: IT02771740129
Pag.1
/1
SIL DECLARATION OF CONFORMITY
SPRIANO Technologies Srl Via Gramsci 1 - 26827 - Terranova dei Passerini (LO) - Italy
under our sole responsibility
Electronic Pressure and Level Transmitters series:
SST70 – SST72 – SST76 – SST77B/BL
Functional safety according to IEC 61508 / IEC 61511
We as the manufacturer declare that are suitable for the use in a safety related application up to SIL3 and up to SIL2 for SST72 according to IEC 61511-1, provided that the attached safety instructions are
observed. The assessment of the safety critical and dangerous random errors results, in case of an annual function test in the following parameters.
SIL (Safety Integrity Level): 3 & 2 (according to table)
HFT (Hardware Failure Tolerance): 0
TRANSMITTER TYPE
SFF PFDav λdd λdu λs λtot DC SIL
SST70 90.24 % 6.39 x 10-7 2.18 x 10-10 7.27 x 10-11 4.55 x 10-10 5.5 x 10-8 75% 3 SST72 80.65 % 24.4 x 10-4 2.23 x 10-6 1.34 x 10-6 3.35 x 10-6 9.16 x 10-6 63% 2 SST76 93.55 % 4.28 x 10-7 3.42 x 10-10 4.87 x 10-11 3.66 x 10-10 4.1 x 10-8 88% 3
SST77B 90.24 % 6.98 x 10-4 2.59 x 10-7 7.96 x 10-8 4.78 x 10-7 9.16 x 10-7 76% 3
SST77BL
Certified under: TUV PROFIT CERT Certificates N°: 70 900 3989
Terranova dei Passerini, Legal representative 14/09/2015 Sergio Valletti
Managing Director