iec - switchgear collection _ ihs, page 2
DESCRIPTION
switcgerTRANSCRIPT
< < 1 2
IEC - Switchgear Collection
This collection contains documents from the following standards organization(s): International Electrotechnical Commission
IEC 60947-6-2 EN-Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switchingdevices (or equipment) (CPS)-Edition 2.1; Consolidated Reprint
IEC 60947-7-1 EN-Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors-Edition 3.0
IEC 60947-7-2 EN-Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks forcopper conductors-Edition 3.0
IEC 60947-7-3 EN-Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminalblocks-Edition 2.0
IEC 60947-8 EN-Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotatingelectrical machines-Edition 1.1; Consolidated Reprint
IEC 60999-2 EN-Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clampingunits Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (i
IEC 61032 EN-Protection of Persons and Equipment by Enclosures - Probes for Verification-Second Edition; Corrigendum 1: 1/2003
IEC 61071 EN-Capacitors for power electronics-Edition 1.0
IEC 61083-1 EN-Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements forInstruments-Second Edition; Replaces IEC 60790 Ed. 1.0:1984
IEC 61083-2 EN-Digital Recorders for Measurements in High-Voltage Impulse Tests - Part 2: Evaluation of Software Used for theDetermination of the Parameters of Impulse Waveforms-Edition 1.0; Includes Access to Additional Content
IEC 61095 EN-Electromechanical contactors for household and similar purposes-Edition 2.0
IEC 61117 EN-Method for Assessing the Short-Circuit Withstand Strength of Partially Type-Tested Assemblies (PTTA)-First Edition
IEC 61180-1 EN-High-Voltage Test Techniques for Low-Voltage Equipment Part 1: Definitions Test and Procedure Requirements-Edition1
IEC 61180-2 EN-High-Voltage Test Techniques for Low-Voltage Equipment - Part 2: Test Equipment-First Edition
IEC 61270-1 EN-Capacitors for microwave ovens - Part 1: General-First Edition
IEC 61439-1 EN-Low-voltage switchgear and controlgear assemblies - Part 1: General rules-Edition 1.0
IEC 61439-2 EN-Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies-Edition1.0
IEC 61642 EN-Industrial a.c. Networks Affected by Harmonics - Application of Filters and Shunt Capacitors-First Edition
IEC 61869-1 EN-Instrument transformers - Part 1: General requirements-Edition 1.0
IEC 61915-1 EN-Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules forthe development of device profiles-Edition 1.0
IEC 61921 EN-Power capacitors Low-voltage power factor correction banks
Industry Standards & Regulations
IEC - Switchgear Collection | IHS, page 2 http://www.ihs.com/products/industry-standards/org/iec/switchgear/page2...
1 of 4 6/19/2013 10:26 AM
IEC 61958 EN-High-Voltage Prefabricated Switchgear and Controlgear Assemblies - Voltage Presence Indicating Systems-FirstEdition
IEC 62026-1 EN-Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules-Edition 2.0
IEC 62026-2 EN-Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface(AS-i)-ED 2.0
IEC 62026-3 EN-Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet-Edition 2.0
IEC 62091 EN-Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps-First Edition
IEC 62208 EN-Empty enclosures for low-voltage switchgear and controlgear assemblies General requirements and controlgearassemblies General requirements-First Edition
IEC 62262 EN-Degrees of Protection Provided by Enclosures for Electrical Equipment Against External Mechanical Impacts (IKCode)-First Edition
IEC 62271-1 EN-High-voltage switchgear and controlgear - Part 1: Common specifications-Edition 1.0
IEC 62271-100 EN-High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers-Edition 2.0
IEC 62271-101 EN-High-voltage switchgear and controlgear - Part 101: Synthetic testing-First Edition
IEC 62271-101 AMD 1 EN-AMENDMENT 1 High-voltage switchgear and controlgear - Part 101: Synthetic testing-Edition 1.0
IEC 62271-102 EN-High-Voltage Switchgear and Controlgear - Part 102: Alternating current disconnectors and earthing switches-FirstEdition; Includes Corrigenda's 04/2002 04/2003 and 02/2005; Replaces IEC 61128 IEC 61129 and IEC 61
IEC 62271-104 EN-High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages of 52 kV andabove-Edition 1.0
IEC 62271-105 EN-High-Voltage Switchgear and Controlgear - Part 105: Alternating Current Switch-Fuse Combustions-First Edition
IEC 62271-107 EN-High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above1 kV up to and including 52 kV-Edition 1
IEC 62271-108 EN-High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers forrated voltages of 725 kV and above-Edition 1
IEC 62271-109 EN-High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches-Edition 2.0
IEC 62271-110 EN-High-voltage switchgear and controlgear - Part 110: Inductive load switching-Edition 2.0
IEC 62271-111 EN-High voltage switchgear and controlgear Part 111: Overhead pad-mounted dry vault and submersible automatic circuitreclosers and fault interrupters for alternating current systems up to 38 kV-Edition 1.0; Same a
IEC 62271-200 EN-High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltagesabove 1 kV and up to and including 52 kV-First Edition; Replaces IEC 60298:1990
IEC 62271-201 EN-High-voltage switchgear and controlgear - Part 201: AC insulation-enclosed switchgear and controlgear for ratedvoltages above 1 kV and up to and including 52 kV-Edition 1.0
IEC 62271-202 EN-High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation-Edition 1.0
IEC 62271-203 EN-High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above52 kV-Replaces IEC 60517:1990
IEC 62271-205 EN-High-voltage switchgear and controlgear - Part 205: Compact switchgear assemblies for rated voltages above 52kV-Edition 1.0
IEC 62271-207 EN-High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies forrated voltages above 52 kV-Edition 1.0
IEC 62271-209 EN-High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgearfor rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and
IEC 62271-3 EN-High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850-Edition 1.0
IEC PAS 62026-7 EN-Low-voltage switchgear and controlgear - Controller-Device Interfaces (CDIs) - Part 7: CompoNet-Edition 1.0
IEC - Switchgear Collection | IHS, page 2 http://www.ihs.com/products/industry-standards/org/iec/switchgear/page2...
2 of 4 6/19/2013 10:26 AM
IEC TR 60787 EN-Application guide for the selection of high-voltage current-limiting fuse-links for transformer circuits-Edition 1.0
IEC TR 60890 EN-A Method of Temperature-rise Assessment by Extrapolation for Partially Type-Tested Assemblies (PTTA) ofLow-Voltage Switchgear and Controlgear-First Edition; Amendment 1: 02-1995
IEC TR 60943 EN-Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals-Edition 2.1; Consolidated Reprint
IEC TR 60996 EN-Method for Verifying Accuracy of Tan Delta Measurements Applicable to Capacitors-First Edition
IEC TR 61459 EN-Low-Voltage Fuses - Coordination between Fuses and Contactors/Motor-Starters - Application Guide-First Edition;Corrigendum 1: 2/2001
IEC TR 61641 EN-Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due tointernal fault-Edition 2.0
IEC TR 61818 EN-Application guide for low-voltage fuses-First Edition
IEC TR 61912-1 EN-Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings-Edition 1.0
IEC TR 61912-2 EN-Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-currentconditions-Edition 1.0
IEC TR 62063 EN-High-Voltage Switchgear and Controlgear - The Use of Electronic and Associated Technologies in Auxiliary Equipmentof Switchgear and Controlgear-Edition 1
IEC TR 62271-208 EN-High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state power-frequencyelectromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations-Edition 1.0
IEC TR 62271-300 EN-High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers-Edition1.0
IEC TR 62271-301 EN-High-voltage switchgear and controlgear - Part 301: Dimensional standardisation of high-voltage terminals-Edition 2.0
IEC TR 62271-302 EN-High-voltage switchgear and controlgear - Part 302: Alternating current circuit-breakers with intentionallynon-simultaneous pole operation-Edition 1.0
IEC TR 62271-303 EN-High-voltage switchgear and controlgear - Part 303: Use and handling of sulphur hexafluoride (SF6)-Edition 1.0
IEC TR 62271-305 EN-High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulateddisconnectors for rated voltages above 52 kV-Edition 1.0
IEC TR 62271-310 EN-High-voltage switchgear and controlgear - Part 310: Electrical endurance testing for circuit-breakers above a ratedvoltage of 52 kV-Edition 2.0
IEC TS 60110-2 EN-Power Capacitors for Induction Heating Installations - Part 2: Ageing Test Destruction Test and Requirements forDisconnecting Internal Fuses-First Edition
IEC TS 60859 EN-Cable Connections for Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages of 72.5 kV and Above - Fluid-Filled and Extruded Insulation Cables - Fluid-Filled and Dry Type Cable-Terminations-Second Edition
IEC TS 60859 CORR 1 EN-Cable Connections for Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages of 725 kV and Above - Fluid-Filled and Extruded Insulation Cables - Fluid-Filled and Dry Type Cable-Terminations-Second Edition
IEC TS 60859 CORR 2 EN-Cable Connections for Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages of 725 kV and Above - Fluid-Filled and Extruded Insulation Cables - Fluid-Filled and Dry Type Cable-Terminations-Second Edition
IEC TS 60871-2 EN-Shunt Capacitors for a.c. Power Systems Having a Rated Voltage Above 1 000 V - Part 2: Endurance Testing-SecondEdition
IEC TS 60871-3 EN-Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 3: Protection of shunt capacitorsand shunt capacitor banks-First Edition
IEC TS 61639 EN-Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 725kV and above-First Edition
IEC TS 61640 EN-Rigid High-Voltage Gas-Insulated Transmission Lines for Rated Voltage of 725 kV and Above-First Edition
IEC TS 62271-304 EN-High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgearfor rated voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions-Edi
IEC - Switchgear Collection | IHS, page 2 http://www.ihs.com/products/industry-standards/org/iec/switchgear/page2...
3 of 4 6/19/2013 10:26 AM
< < 1 2
About IHS Site Map Privacy Policy Legal Statement ©2011 IHS Inc. All Rights Reserved.
IEC - Switchgear Collection | IHS, page 2 http://www.ihs.com/products/industry-standards/org/iec/switchgear/page2...
4 of 4 6/19/2013 10:26 AM