identity - efloors · 2015. 1. 6. · particular installation may not match these samples. ......
TRANSCRIPT
IDEN
TIT
Y™ FLO
OR
/WA
LLG
LAZ
ED
CE
RA
MIC
/ CO
LOR
BO
DY
™ P
OR
CE
LAIN
Cover photo features Imperial Gold, Fabric (Unpolished) 12 x 24 and 24 x 24 field tile on the floor. Wall features Imperial Gold, Gloss 8 x 20 wall tile and decorative accent.
Envelop your space with the contemporary elegance of
Identity Floor, a ColorBody™ porcelain tile with three
unique surfaces. Fabric resembles fine tweed with subtle
grains and metallic specks. Grooved mirrors the depth
of raked sand. Cement embodies the modern style of a
cement-look, combined with movement and variation. This
line contains a vast range of colors, sizes, and finishes that
can bring to life the “identity” of your space.
Add more personality to your space with the addition of
Identity Wall. Available in the same seven coordinating
colors as the floor tile, this wall line comes in a
contemporary 8 x 20 size, which is available in gloss and
matte finishes. A coordinating gloss and matte decorative
accent is also available in each color and is sure to make a
subtle yet memorable statement.
floo
r •
wal
l •
coun
tert
op
GLAZED CERAMIC
COLORBODY™ PORCELAIN
IDENTITY™ WALLIDENTITY™ FLOOR
Photo features Paramount White Matte 8 x 20 wall tile in a diagonal grid pattern on the wall. Floor features Twilight Black Grooved (Unpolished) 12 x 24 field tile in a grid pattern.
Floor TileFABRIC (LIGHT POLISHED & UNPOLISHED)
METRO TAUPE MY22
PARAMOUNT WHITE MY20 BISTRO CREAM MY21 IMPERIAL GOLD MY23
OXFORD BROWN MY24 CASHMERE GRAY MY25 TWILIGHT BLACK MY26
GROOVED (12 X 24 ONLY - LIGHT POLISHED & UNPOLISHED)
METRO TAUPE MY32
PARAMOUNT WHITE MY30 BISTRO CREAM MY31 IMPERIAL GOLD MY33
OXFORD BROWN MY34 CASHMERE GRAY MY35 TWILIGHT BLACK MY36
CEMENT (18 X 18 ONLY - UNPOLISHED ONLY)
METRO TAUPE MY42
PARAMOUNT WHITE MY40 BISTRO CREAM MY41 IMPERIAL GOLD MY43
OXFORD BROWN MY44 CASHMERE GRAY MY45 TWILIGHT BLACK MY46
Close-up ofFabric Tile
Close-up ofGrooved Tile
Close-up ofCement Tile
floo
r •
wal
l •
coun
tert
opCOLORBODY™ PORCELAINIDENTITY™ FLOOR
Floor Decorative Accents (Available in Unpolished Fabric only)
CREAM/BROWN MY51 GOLD/BROWN MY53
TAUPE/TAN MY52 WHITE/BLACK MY50
GRAY/BLACK MY54
BISTRO CREAM MY21 METRO TAUPE MY22 IMPERIAL GOLD MY23
OXFORD BROWN MY24 CASHMERE GRAY MY25 TWILIGHT BLACK MY26
PARAMOUNT WHITE MY20
Mosaics (Available in Unpolished Fabric only)
Wall Field Tile (All colors are also available in Gloss Field Tile)
MATTE PARAMOUNT WHITE MY67 MATTE BISTRO CREAM MY69 MATTE METRO TAUPE MY71
MATTE TWILIGHT BLACK MY68
MATTE IMPERIAL GOLD MY70 MATTE OXFORD BROWN MY73MATTE CASHMERE GRAY MY72
Wall Decorative Accents (All colors are also available in Gloss Decorative Accents)
MATTE PARAMOUNT WHITE MY67 MATTE BISTRO CREAM MY69 MATTE METRO TAUPE MY71
MATTE IMPERIAL GOLD MY70 MATTE OXFORD BROWN MY73MATTE CASHMERE GRAY MY72
MATTE TWILIGHT BLACK MY68
Close-up of Wall Decorative Accent
GLAZED CERAMICIDENTITY™ WALLfl
oor •
wal
l •
coun
tert
op
Photo features Oxford Brown (Light Polished) 24 x 24 field tile on the floor and Oxford Brown Gloss 8 x 20 wall tile and Gloss decorative accent on the wall.
SIZES
SQ.FT. CARTON
PCS. PER CARTON
24 x 24 Field Tile (Fabric only)
23-1/2" x 23-1/2" (59.8 cm x 59.8 cm) 15.49 4
12 x 24 Field Tile* (Fabric & Grooved)
11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) 11.62 6
18 x 18 Field Tile** (Fabric & Cement)
17-5/8" x 17-5/8" (44.8 cm x 44.8 cm) 13.07 6
12 x 12 Field Tile (Fabric only)
11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) 11.62 12
1 x 3 Mosaic (Mesh-mounted) (Unpolished Fabric only)
Sheet: 11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) 9.00 9
12 x 24 Decorative Accent 11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) -- 4
n Grooved available in 12 x 24 unpolished and light polished only.
sCement available in 18 x 18 unpolished only.
LINEAR OPTIONS™ SIZES
SQ.FT. CARTON
PIECES PER CARTON
6 x 24 Field Tile 6" x 23-1/2" (14.63 cm x 59.8 cm) 10.65 11
4 x 24 Field Tile 4" x 23-1/2" (9.73 cm x 59.8 cm) 6.46 10
2 x 24 Field Tile 2" x 23-1/2" (4.67 cm x 59.8 cm) 6.66 20
Additional linear and rectangular sizes available through Linear Options™, Daltile’s linear cutting service. Visit www.daltile.com/linearoptions for sizes and order information.
NOTES
Identity Fabric (Light Polish Surface) **Please Read Carefully** Note to Tile Installer: This product is directional by design and MUST be installed with the arrows on the back of each tile facing in the same direction.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
For additional information refer to “Factors to Consider” at: www.daltile.com/CommercialFactors
Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
INSTALLATION
THICKNESS GROUT JOINT RECOMMENDATION
3/8" 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)
RESIDENTIAL USAGE
FLOORS WALLS COUNTERTOPSEXTERIOR
PATIOSEXTERIOR POOL
DECKS
F W C EP** ED*
All surfaces are suitable for pool linings. *Fabric Unpolished surface only. **Unpolished only.
TRIM
TYPE NUMBER SIZEPCS. PER CARTON
Bullnose (Fabric) (Light Polished & Unpolished) S-44C9 4 x 12 30
Bullnose (Grooved) (Light Polished & Unpolished) S-44F9 4 x 24 10
Bullnose (Cement) (Unpolished) S-44H9 4 x 18 10
Cove Base (Fabric) S-36C9TB 6 x 12 30
Cove Base Outcorner (Fabric) SC-36C9T 1 x 6 15
TEST RESULTS (Unpolished only)
ASTM# RESULT
Water Absorption C373 < 0.5%
Breaking Strength C648 > 550 lbs
Scratch Hardness MOHS 8.0 (6.0 for Twilight Black)
Chemical Resistance C650 Resistant
Coefficient of Friction (Unpolished) C1028 Wet: ≥0.60 Dry: ≥0.70
Coefficient of Friction (Light Polished) C1028 Wet: ≥0.50 Dry: ≥0.60
SLIP RESISTANCE (WET) : 2 & 3The higher the rating, the higher the slip resistance.
1 < .50
2 .50 - .59 (Light Polished)
3 ≥ .60 (Unpolished)
COMMERCIAL USAGE
INTERIOR EXTERIOR
RESIDENTIALLIGHT
COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL
Floors/Patios * * *
Walls/Backsplashes
Countertops
Pool Decking**
Pool Linings
* Unpolished only
** Fabric (Unpolished only)
FABRIC (Unpolished only): Suitable for exterior patios (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.
GROOVED: Suitable for exterior patios (excluding pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.
CEMENT: Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.
COLORBODY™ PORCELAINIDENTITY™ FLOOR
SHADE VARIATION
MEDIUM (V2)Color variation within each tile.
SIZES
SQ.FT. CARTON
PCS. PER CARTON
8 x 20 Field Tile 7-1/8" x 19-9/32" (20.0 cm x 50.0 cm) 15.06 14
8 x 20 Decorative Accent 7-1/8" x 19-9/32" (20.0 cm x 50.0 cm) -- 14
NOTES
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
For additional information refer to “Factors to Consider” at: www.daltile.com/CommercialFactors
Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
INSTALLATION
THICKNESS GROUT JOINT RECOMMENDATION
5/16" 1/16"
TRIM
TYPE NUMBER SIZEPCS. PER CARTON
Jolly S-5810J 1 x 10 14
TEST RESULTS ASTM# RESULT
Water Absorption C373 < 20.0%
Breaking Strength C648 100-230 lbs
Scratch Hardness MOHS 4.0-6.5
Chemical Resistance C650 Resistant
COMMERCIAL USAGE
INTERIOR EXTERIOR
RESIDENTIALLIGHT
COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL
Floors/Patios
Walls/Backsplashes
Countertops*
Pool Decking
Pool Linings
Suitable for exterior walls in non-freezing climates when proper installation methods are followed.
* Dark colors may show scratches.
RESIDENTIAL USAGE
FLOORS WALLS COUNTERTOPSEXTERIOR
PATIOSEXTERIOR POOL
DECKS
F W C* EP EDSuitable for non-freezing climates when proper installation methods are followed.
*Dark colors may show scratches.
GLAZED CERAMICIDENTITY™ WALL
SHADE VARIATION
MEDIUM (V2)Color variation within each tile.
GLAZED CERAMIC
COLORBODY™ PORCELAIN
IDENTITY™ WALLIDENTITY™ FLOOR
7834 C. F. Hawn Freeway | Dallas, TX 75217 | 214.398.1411 800.933.TILEFor more information about Daltile products and services, visit our website at daltile.com ©
2012
Dal
-Tile
Cor
pora
tion
(6/
12)
SSD
TID
ENT
ITY
By their very design, Daltile products can help make it easier for you to earn LEED™ points and/or points towards many industry leading green home building programs. From using recycled material content to establishing manufacturing facilities within 500 miles of your project, we help ensure you don’t have to compromise your design to be environmentally conscious. For detailed information, visit daltilegreenworks.com.
floo
r •
wal
l •
coun
tert
op