ideal for… -155 dbc intermodulation distortion low loss … · types, reverse polarity, and a...

(800) TMS-COAX • www.timesmicrowave.com118

TIMES MICROWAVE SYSTEMS

TCOM®-195 Low Loss Low Passive Intermod Coax

Electrical Specifications Performance Property Units US (metric)

Velocity of Propagation % 76 Dielectric Constant NA 1.56 Time Delay nS/ft (nS/m) 1.27 (4.17) Impedance ohms 50 Capacitance pF/ft (pF/m) 25.4 (83.3) Inductance uH/ft (uH/m) 0.064 (0.21) Shielding Effectiveness dB >100 DC Resistance Inner Conductor ohms/1000ft (/km) 7.6 (24.9) Outer Conductor ohms/1000ft (/km) 3.42 (11.2) Voltage Withstand Volts DC 1000 Jacket Spark Volts RMS 3000 Peak Power kW 2.5 Passive Intermod dBc -155

• TCOM® standard is a UV Resistant Polyethylene jack- eted cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly bet- ter than any air-dielectric and corrugated hard-line cables.TCOM®- FR is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. TCOM- FR has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. Flexibility and bendability are hallmarks of the TCOM cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.Low Loss is another hallmark feature of TCOM. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.Passive Intermod is lower than –155 dBc exceed the performance levels for most wireless applications.RF Shielding is 60 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 100 dB (i.e. >200 dB between two adjacent cables). Weatherability: TCOM cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.Connectors: A wide variety of connectors are available for TCOM cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.Cable Assemblies: All TCOM cable types are avail-able as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.

Ideal for… • -155 dBc Intermodulation Distortion • Low Loss UHF/Microwave Interconnect • Wireless Base Station Interconnect • Flexible for Easy Routing

TCO

M-1

95

Environmental Specifications Performance Property 0F oC

Installation Temperature Range -40/+185 -40/+85 Storage Temperature Range -94/+185 -70/+85 Operating Temperature Range -40/+185 -40/+85

Part Description Stock

Part Number Application Jacket Color Code

TCOM-195 Outdoor PE Black 55021 TCOM-195-FR Indoor-Riser CMR FRPE Black 55012

Construction Specifications Description Material In. (mm)

Inner Conductor Solid BC 0.037 (0.94) Dielectric Foam PE 0.110 (2.79) Outer Conductor SPC Strip Braid 0.120 (3.05) Overall Braid TC Braid over Al tape 0.148 (3.76) Jacket (see table above) 0.195 (4.95)

Mechanical Specifications Performance Property Units US (metric)

Bend Radius: installation in. (mm) 0.5 (12.7) Bend Radius: repeated in. (mm) 2 (50.8) Bending Moment ft-lb (N-m) 0.2 (0.27) Weight lb/ft (kg/m) 0.035 (0.05) Tensile Strength lb (kg) 40 (18.2) Flat Plate Crush lb/in. (kg/mm) 15 (0.27)

(800) TMS-COAX • www.timesmicrowave.com 119


TCO

M-1

95

Frequency (MHz)

Attenuation vs. Frequency (typical)A

tten

uat

ion

(db

per 1

00 fe

et)

100.0

10.0

1.010 100 1,000 10,000

CCT-023192-165

CT-240/200/195/1003190-667

DBT-U3192-001

RB-CST3192-086

CST-195/2003192-102

Type Part Number Stock Code Description Install Tools

Crimp Tool CT-240/200/195/100 3190-667 Crimp tool for LMR-100, 195, 200and 240 connectors Deburr Tool DBT-U 3192-001 Removes center conductor rough edges Cutting Tool CCT-02 3192-165 Cable end flush cut tool Replacement Blade RB-02 3192-166 Replacement blade for cutting tool Strip Tool CST-195/200 3192-102 Combination prep tool for LMR-195 and LMR-200 Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all strip tools

TC-195-NMH-X3190-2880

1 2 3 4

5 6

TC-195-SM-SS-X3190-2878

EZ-195-SM-X3190-6140

TC-195-TM-X3190-2879

EZ-195-TM-RP-X3190-6142

EZ-195-BM-X3190-6141

Connectors Inner Outer Finish* Part Stock VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)

1. N Male Straight Plug TC-195-NMH-X 3190-2880 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)

2. SMA Male Straight Plug EZ-195-SM-X 3190-6140 <1.30:1 (6) Hex Spring Finger Crimp A/G 0.9 (22.0) 0.37 (9.4) 0.019 (8.6)

3. SMA Male Straight Plug TC-195-SM-SS-X 3190-2878 <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)

4. TNC Male Straight Plug TC-195-TM-X 3190-2879 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4)

5. TNC Male Reverse Polarity EZ-195-TM-RP-X 3190-6142 <1.35:1 (6) Hex Spring Finger Crimp A/G 1.1 (28.3) 0.87 (22.0) 0.045 (20.4)

6. EZ-195-BM-X BNC Male EZ-195-BM-X 3190-6141 <1.30:1 (4) Knurl Spring Finger Crimp A/G 1.1 (28.4) 0.60 (14.5) 0.045 (20.4)

* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair

Calculate Attenuation = (0.321011) • FMHz + (0.000469) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);

Sea Level; dry air; atmospheric pressure; no solar loading

Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 10,000 Attenuation dB/100 ft 1.8 2.3 4.0 4.9 7.0 10.1 13.1 14.5 15.3 17.2 27.2 36.8 Attenuation dB/100 m 5.8 7.5 13.1 16.0 23.0 33.0 43.1 47.5 50.2 56.5 89.1 120.7 Avg. Power kW 0.91 0.71 0.40 0.33 0.23 0.16 0.12 0.11 0.10 0.09 0.06 0.04




Bend Radius: installation in. (mm) 0.5 (12.7) Bend Radius: repeated in. (mm) 2 (50.8) Bending Moment ft-lb (N-m) 0.2 (0.27) Weight lb/ft (kg/m) 0.040 (0.06) Tensile Strength lb (kg) 40 (18.2) Flat Plate Crush lb/in. (kg/mm) 15 (0.27)


Inner Conductor Solid BC 0.044 (1.12) Dielectric Foam PE 0.116 (2.95) Outer Conductor SPC Strip Braid 0.126 (3.20) Overall Braid TC Braid over Al tape 0.154 (3.91) Jacket (see table) 0.195 (4.95)



TCOM®-200Low Loss Low Passive Intermod Coax

TCO

M-2

00






TCOM-200 Outdoor PE Black 55001 TCOM-200-FR Indoor-Riser CMR FRPE Black 55022 TCOM-200-PUR-DB Outdoor/ PUR Black 55042 Watertight



TCO

M-2

00




Attenuation vs. Frequency (typical)

Att

enu

atio

n(d

b pe

r 100

feet

)

100.0

10.0

1.010 100 1,000 10,000

Frequency (MHz)



TCO

M-2

00

TCOM-200Low Loss Low Passive Intermod Coax


1. BNC Male Straight Plug TC-200-BM 3190-225 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.7 (43.2) 0.56 (14.2) 0.045 (20.4)

2. Mini-UHF Straight Plug TC-200-MUHF 3190-444 <1.25:1 (2.5) Knurl Solder Crimp NG 1.1 (27.9) 0.45 (11.4) 0.015 (6.8)

3. N Male Straight Plug EZ-200-NMH-X 3190-2886 <1.25:1 (8) Knurl Spring Fit Crimp S/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)

4. N Male Straight Plug EZ-200-NMH-D 3190-1918 <1.25:1 (8) Hex/Knurl Spring Fit Crimp A/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)

5. N Male Straight Plug TC-200-NM 3190-224 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)

6. N Male Reverse Polarity TC-200-NM-RP 3190-959 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)

7. SMA Male Straight Plug TC-200-SM-SS-X 3190-2881 <1.25:1 (8) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)

8. SMA Male Reverse Polarity TC-200-SM-RP 3190-327 <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)

9. SMA Male Right Angle EZ-200-SM-RA-SS-X 3190-6006 <1.30:1 (6) Hex Spring Finger Crimp A/G 1.0 (24.7) 0.70 (17.7) 0.019 (8.6)

10. SMA Female Straight Jack EZ-200-SF-SS-X 3190-6007 <1.25:1 (6) NA Spring Finger Crimp A/G 0.9 (23.2) 0.40 (10.0) 0.019 (8.6)

11. TNC Female Straight Jack TC-200-TF 3190-263 <1.25:1 (2.5) NA Solder Crimp N/G 1.3 (33.0) 0.57 (14.5) 0.033 (15.0)

12. TNC Female Reverse Polarity EZ-200-TF-RP 3190-793 <1.25:1 (2.5) NA Spring Fit Crimp A/G 1.3 (33.0) 0.57 (14.5) 0.033 (15.0)

13. TNC Male Right Angle EZ-200-TM-RA-X 3190-6008 <1.25:1 (6) Hex Spring finger Crimp A/G 1.1 (27.5) 1.10 (28.8) 0.091 (41.7)

14. TNC Male Straight Plug EZ-200-TM 3190-1266 <1.25:1 (2.5) Knurl Spring Fit Crimp S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4)

15. TNC Male Straight Plug TC-200-TMC 3190-240 <1.25:1 (2.5) Knurl Solder Clamp S/G 1.7 (43.2) 0.59 (15.0) 0.045 (20.4)

16. TNC Male Reverse Polarity EZ-200-TM-RP 3190-792 <1.25:1 (2.5) Knurl Spring Fit Crimp A/G 1.4 (35.6) 0.32 (8.1) 0.045 (20.4)


TC-200-BM3190-225

1

6

12

1613 14 15

119 10

7 85

432

TC-200-MUHF3190-444

EZ-200-NMH-D3190-1918

TC-200-NM3190-224

EZ-200-SM-RA-SS-X3190-6006

EZ-200-SF-SS-X3190-6007

TC-200-NM-RP3190-959

TC-200-SM-SS-X3190-2881

TC-200-SM-RP3190-327

EZ-200-TM3190-1266

EZ-200-TM-RA-X3190-6008

TC-200-TMC3190-240

EZ-200-TM-RP3190-792

TC-200-TF3190-263

EZ-200-TF-RP3190-793

EZ-200-NMH-X3190-2886



Part Stock Type Number Code Description

Ground Kit GK-S200TT GK-S200TT Standard Ground Kit (each)

Hardware Accessories

TCO

M-2

00

CT240/200/195/1003190-667

GK-S200TT

CCT-023192-165

Install Tools Part Stock Type Number Code Description

Crimp Tool CT-240/200/195/100 3190-667 Crimp tool for LMR-100, 195, 200 and 240 connectors Deburr Tool DBT-U 3192-001 Removes center conductor rough edges Cutting Tool CCT-02 3190-165 Cable end flush cut tool Replacement Blade RB-02 3192-166 Replacement blade for cutting tool Strip Tool CST-195/200 3192-102 Combination prep tool for LMR-195 and LMR-200 Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all strip tools

DBT-U3192-001

CST-195/2003192-102

RB-CST3192-086



TCO

M-2

40


Bend Radius: installation in. (mm) 0.75 (19.1) Bend Radius: repeated in. (mm) 2.5 (63.5) Bending Moment ft-lb (N-m) 0.25 (0.34) Weight lb/ft (kg/m) 0.045 (0.07) Tensile Strength lb (kg) 80 (36.3) Flat Plate Crush lb/in. (kg/mm) 20 (0.36)











TCOM-240 Outdoor PE Black 55017 TCOM-240-FR Indoor-Riser CMR FRPE Black 55023




Calculate Attenuation =(0.229148) • FMHz + (0.000331) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)

Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F)

Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading

Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 10,000

Attenuation dB/100 ft 1.3 1.6 2.9 3.5 5.0 7.2 9.4 10.3 10.9 12.3 19.4 26.2

Attenuation dB/100 m 4.2 5.4 9.4 11.4 16.4 23.5 30.7 33.9 35.8 40.3 63.6 86.0

Avg. Power kW 1.58 1.22 0.70 0.57 0.40 0.28 0.21 0.19 0.18 0.16 0.10 0.07

Att

enu

atio

n(d

b pe

r 100

feet

)

100.0

10.0

1.010 100 1,000 10,000

Frequency (MHz)

TCO

M-2

40



TCO

M-2

40

TCOM-240 Low Loss Low Passive Intermod Coax

Connectors Inner Outer Finish* Part Stock VSWR** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)

1. BNC Male Straight Plug TC-240-BMC 3190-242 <1.25:1 (2.5) Knurl Solder Clamp S/G 1.7 (43) 0.56 (14.2) 0.040 (18.1) 2. BNC Male Straight Plug TC-240-BM-X 3190-2890 <1.25:1 (2.5) Knurl Solder Crimp A/G 1.7 (43) 0.56 (14.2) 0.043 (19.5)

3. BNC Male Straight Plug EZ-240-BM-X 3190-6120 <1.25:1 (4) Knurl Spring Finger Crimp A/G 1.2 (31.7) 0.60 (14.5) 0.045 (20.4)

4. BNC Male Right Angle EZ-240-BM-RA-X 3190-2868 <1.30:1 (4) Knurl Spring Finger Crimp A/G 1.3 (33.6) 1.19 (30.1) 0.091 (41.7)

5. BNC Male Right Angle TC-240-BM-RA-X 3190-2869 <1.30:1 (4) Knurl Solder Crimp A/G 1 (25.1) 1.04 (26.4) 0.091 (41.7)

6. Mini-UHF Straight Plug TC-240-MUHF 3190-445 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.1 (28) 0.45 (11.4) 0.014 (6.4)

7. N Male Straight Plug EZ-240-NMH-X 3190-2893 <1.25:1 (2.5) Hex/Knurl Spring Finger Crimp A/G 1.5 (38.1) 0.78 (19.8) 0.086 (39.0)

8. N Male Straight Plug TC-240-NMH-X 3190-2887 <1.25:1 (2.5) Hex Solder Crimp N/S 1.5 (38) 0.75 (19.1) 0.086 (39.0) 9. N Male Right Angle EZ-240-NMH-RA-X 3190-6143 <1.35:1 (6) Hex Spring Finger Crimp A/G 1 (25.1) 1.04 (26.4) 0.115 (52.0)

10. N Male Straight Plug TC-240-NMC 3190-244 <1.25:1 (2.5) Knurl Solder Clamp S/G 1.5 (38) 0.75 (19.1) 0.082 (37.2)

11. N Male Right Angle TC-240-NMH-RA-D 3190-2426 <1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.2 (32.4) 1.22 (31.0) 0.091 (41.7)

12. N Female Panel Jack TC-240-NF-BHF(A) 3190-866 <1.25:1 (2.5) NA Solder Crimp A/G 1.7 (44) 1.00 (25.4) 0.115 (52.2)

13. N Female Bulkhead Jack TC-240-NF-BH-X 3190-2888 <1.25:1 (2.5) NA Solder Clamp A/G 1.8 (46) 0.88 (22.4) 0.145 (65.8)

14. N Female Straight Jack EZ-240-NF-X 3190-2795 <1.25:1 (6) NA Spring Finger Crimp A/G 1.4 (35.4) 0.62 (15.8) 0.040 (18.0) 15. SMA Female Bulkhead Jack TC-240-SFSS-BH-X 3190-2896 <1.25:1 (2.5) NA Solder Crimp SS/G 1.1 (29) 0.31 (7.9) 0.019 (8.6)

16. SMA Male Straight Plug TC-240-SM-SS-X 3190-2898 <1.25:1 (10) Hex Solder Crimp SS/G 1.0 (25) 0.32 (8.1) 0.016 (7.3) 17. SMA Male Right Angle TC-240-SM-RA-SS-X 3190-2900 <1.35:1 (6) Hex Solder Crimp SS/G 0.8 (20) 0.65 (16.5) 0.019 (8.6)

18. SMA Male Reverse Polarity TC-240-SM-RP 3190-326 <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25) 0.32 (8.1) 0.016 (7.3)

19. TNC Male Straight Plug EZ-240-TM 3190-1128 <1.25:1 (2.5) Knurl Spring Finger Crimp N/G 1.4 (34.3) 0.59 (15.0) 0.043 (19.5)

20. TNC Male Straight Plug TC-240-TM-X 3190-2797 <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.59 (15.0) 0.043 (19.5)

21. TNC Male Reverse Polarity EZ-240-TM-RP 3190-970 <1.25:1 (2.5) Knurl Spring Finger Crimp A/G 1.4 (36) 0.59 (15.0) 0.043 (19.5)

22. TNC Female Straight Jack EZ-240-TF-X 3190-6204 <1.25:1 (6) NA Spring Finger Crimp A/G 1.1 (27.2) 0.87 (22.0) 0.033 (15.0)

23. TNC Female Reverse Polarity EZ-240-TF-RP-X 3190-6167 <1.35:1 (6) NA Spring Finger Crimp A/G 1.1 (27.2) 0.87 (22.0) 0.033 (15.0)

24. F Male Straight Plug TC-240-FM-X 3190-2891 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.1 (28) 0.45 (11.4) 0.014 (6.4)

25. QMA Male Straight Plug EZ-240-QM-X 3190-2894 <1.25: (6) Knurl Spring Finger Crimp N/G 1.2 (30.0) 0.41 (10.5) 0.014 (6.35)

26. QMA Male Right Angle EZ-240-QM-RA-X 3190-2895 <1.25: (<6) Knurl Spring Finger Crimp N/G 0.8 (20.3) 0.65 (16.5) 0.019 (8.62) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair

TC-240-BMC3190-242

1

5

2 3 4

TC-240-MUHF3190-445

TC-240-NMH-X3190-2887

TC-240-NMC3190-244EZ-240-NMH-RA-X

3190-6143TC-240-NF-BHF (A)

3190-866

TC-240-NF-BH-X3190-2888 TC-240-SM-SS-X

3190-2898TC-240-SF-SS-BH-X

3190-2896EZ-240-NF-X

3190-2795

TC-240-NMH-RA-D3190-2426

EZ-240-NMH-X3190-2893

TC-240-BM-X3190-2890

EZ-240-BMX3190-6120

EZ-240-BM-RA-X3190-2868

TC-240-BM-RA-X3190-2869

6

9

14 15 1613

1210 11

87





Hardware AccessoriesGK-S240TT

TCO

M-2

40

TC-240-SM-RA-SS-X3190-2900

TC-240-SM-RP3190-326

EZ-240-TM-RP3190-970

EZ-240-TF-X3190-6204

EZ-240-TF-RP-X3190-6167

TC-240-TM-X3190-2797

EZ-240-TM3190-1128

Installation Tools Part Stock Type Number Code Description

Crimp Tool CT-240/200/195/100 3190-667 Crimp tool for LMR-100, 195, 200 and 240 connectors Strip Tool CST-240A 3192-152 Prep tool for LMR-240 connectors Deburr Tool DBT-U 3192-001 Removes center conductor rough edges Cutting Tool CCT-02 3192-165 Cable end flush cut tool Replacement Blade RB-02 3192-166 Replacement blade for cutting tool Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all CST strip tools

CT-240/200/195/1003190-667

DBT-U3192-001

CST-240A3192-152

RB-CST3192-086

17 18 19 20

21 22 23 24

25 26

TC-240-FM-X3190-2891

EZ-240-QM-X3190-2894

EZ-240-QM-RA-X3190-2895

CCT-023192-165



TCO

M-3

00





Velocity of Propagation % 85 Dielectric Constant NA 1.38 Time Delay nS/ft (nS/m) 1.20 (3.92) Impedance ohms 50 Capacitance pF/ft (pF/m) 23.9 (78.4) Inductance uH/ft (uH/m) 0.060 (0.20) Shielding Effectiveness dB >100 DC Resistance Inner Conductor ohms/1000ft (/km) 2.12 (7.0) Outer Conductor ohms/1000ft (/km) 2.10 (6.9) Voltage Withstand Volts DC 2000 Jacket Spark Volts RMS 5000 Peak Power kW 10 Passive Intermod dBc -155






Calculate Attenuation=(0.194337)• FMHz+(0.000327)•FMHz(interactivecalculatoravailableathttp://www.timesmicrowave.com/cable_calculators)Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);

SeaLevel;dryair;atmosphericpressure;nosolarloading

Frequency (MHz)



Att

enu

atio

n(dbper100feet)

100.0

10.0

1.010 100 1,000 10,000

Part Description Stock Part Number Application Jacket Color Code

TCOM-300 Outdoor PE Black 55011 TCOM-300-FR Indoor-Riser CMR FRPE Black 55013 TCOM-300-PUR-DB Outdoor/ PUR Black 55038 Watertight



TCO

M-3

00

Hardware Accessories Type Part Number Stock Code Description


GK-S300TT

DBT-U3192-001

Install Tools Type Part Number Stock Code Description Crimp Tool CT-400/300 3190-666 Crimp tool for LMR 300 connectors Deburr Tool DBT-U 3192-001 Removes center conductor rough edges CuttingTool CCT-02 3192-165 Cableendflushcuttool Prep Tool CST-300 3192-084 Prep tool for LMR-300 connectors Replacement Blade RB-02 3192-166 Replacement blade for cutting tool Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all strip tools

CT-400/3003190-666

CCT-023192-165

Connectors Inner Outer Finish* Part Stock VSWR** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)

1. TNC Male Straight Plug TC-300-TM 3190-500 <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.59 (15.0) 0.050 (22.7) 2. SMA Male Straight Plug TC-300-SM 3190-501 <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25) 0.35 (8.9) 0.018 (8.2) 3. SMA Female Bulkhead Jack TC-300-SF-BH 3190-590 <1.25:1 (2.5) NA Solder Crimp SS/G 1.1 (28) 0.31 (7.9) 0.022 (10.0) 4. N Male Straight Plug TC-300-NMH-X 3190-2861 <1.25:1 (6) Hex/Knurl Solder Crimp A/G 1.3 (33) 0.86 (21.8) 0.084(38.1) 5. N Male Right Angle TC-300-NMH-RA-D 3190-2761 <1.30:1 (2.5) Hex/Knurl Solder Crimp N/S 1.4 (35) 1.41 (35.8) 0.130 (59.0) 6. N Female Straight Jack EZ-300-NF-X 3190-3078 <1.25:1 (6) NA Spring Finger Crimp A/G 1.4 (36.5) 0.87 (22.0 0.033 (18.0)

TC-300-TM3190-500

TC-300-SF-BH3190-590

TC-300-NMH-RA-D3190-2761

TC-300-NMH-X3190-2861

3 4

5 6

TC-300-SM3190-501

EZ-300-NF-X3190-3078

2

CST-3003192-084

1

RB-CST3192-086



TCO

M-4

00




Inner Conductor Solid BCCAI 0.108 (2.74) Dielectric Foam PE 0.285 (7.24) Outer Conductor SPC Strip Braid 0.295 (7.49) Overall Braid TC Braid over Al tape 0.330 (8.38) Jacket (see table) 0.405 (10.29)

Electrical Specifications Performance Property Units US (metric) Velocity of Propagation % 85 Dielectric Constant NA 1.38 Time Delay nS/ft (nS/m) 1.20 (3.92) Impedance ohms 50 Capacitance pF/ft (pF/m) 23.9 (78.4) Inductance uH/ft (uH/m) 0.060 (0.20) Shielding Effectiveness dB >100 DC Resistance Inner Conductor ohms/1000ft (/km) 1.39 (4.6) Outer Conductor ohms/1000ft (/km) 1.47 (4.8) Voltage Withstand Volts DC 2500 Jacket Spark Volts RMS 8000 Peak Power kW 16 Passive Intermod dBc -155

TCOM®-400Low Loss Low Passive Intermod CoaxIdeal for… • -155 dBc Intermodulation Distortion • Low Loss UHF/Microwave Interconnect • Wireless Base Station Interconnect • Flexible for Easy Routing

Environmental Specifications Performance Property 0F oC Installation Temperature Range -40/+185 -40/+85 Storage Temperature Range -94/+185 -70/+85 Operating Temperature Range -40/+185 -40/+85

Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 10,000 Attenuation dB/100 ft 0.7 0.9 1.6 2.0 2.9 4.2 5.4 6.0 6.4 7.2 11.5 15.7

Attenuation dB/100 m 2.4 3.1 5.4 6.5 9.5 13.6 17.9 19.7 20.9 23.6 37.6 51.4

Avg. Power kW 3.12 2.41 1.38 1.13 0.78 0.54 0.41 0.37 0.35 0.31 0.19 0.14

Att

enu

atio

n(d

b p

er 1

00 f

eet)

100

10

1.0

0.1

10 100 1,000 10,000Frequency (MHz)


Part Description Stock Part Number Application Jacket Color Code TCOM-400 Outdoor PE Black 55003 TCOM-400-FR Indoor-Riser CMR FRPE Black 55016 TCOM-400-PUR Indoor/Outdoor PUR Black 55015 TCOM-400-PUR-DB Outdoor/ PUR Black 55031 Watertight



TCO

M-4

00

Calculate Attenuation = (0.130555) • FMHz + (0.000262) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)

Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);


TC-400-MUHF3190-520

EZ-400-4195M-X3190-2969

TC-400-BM-X3190-6232

TC-400-BM3190-318

TC-400-716MC3190-279

TC-400-716M-X3190-2597

TC-400-716FC3190-376

1 2 3 4

5

TC-400-NFC3190-299

EZ-400-NF-BH 3190-518

EZ-400-NF-X3190-2818 TC-400-NFC-BH (A)

3190-872

6

9

87

TC-400-NMC3190-277

EZ-400-NMH-X3190-2590 TC-400-NMH-X

3190-2626

SC-400-NM3190-1454

13

121110

EZ-400-NMK3190-661

TC-400-NMC-RA (A)3190-870

TC-400-NM-RP3190-960

17

161514

EZ-400-NMH-RA-X3190-2638

TC-400-SM3190-439

18

TC-400-SF-X3190-6174

EZ-400-TF-X3190-3049

TC-400-TF-X3190-3051

EZ-400-TF-RP3190-795

19

EZ-400-TM-RP3190-794

20

21

TC-400-TM-X3190-2532

22

EZ-400-TM-X3190-2533

23 24

25 26 27 28 TC-400-TM-RA-D 3190-2671



TCO

M 4

00



1. 4.1-9.5 mini Straight Plug EZ-400-4195M-X 3190-2969 <1.25:1 (6) Hex Spring Finger Crimp A/G 1.5 (38.1) 0.89 (22.6) 0.103 (46.8) DIN Male 2. 7-16 DIN Female Straight Jack TC-400-716-FC 3190-376 <1.25:1 (2.5) NA Solder Clamp S/S 1.6 (41) 1.13 (28.7) 0.281 (127.5) 3. 7-16 DIN Male Straight Plug TC-400-716-MC 3190-279 <1.25:1 (2.5) Hex Solder Clamp S/S 1.4 (36) 1.40 (35.6) 0.268 (121.6) 4. 7-16 DIN Male Straight Plug TC-400-716M-X 3190-2597 <1.25:1 (6) Hex Solder Crimp A/S 1.6 (39.5) 1.42 (36.0) 0.320 (145.0) 5. BNC Male Straight Plug TC-400-BM 3190-318 <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.56 (14.2) 0.063 (28.6) 6. BNC Male Straight Plug TC-400-BM-X 3190-6232 <1.30:1 (4) Knurl Solder Crimp A/G 1.8 (46.8) 0.60 (14.5) 0.630 (28.6) 7. Mini-UHF Straight Plug TC-400-MUHF 3190-520 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.1 (28) 0.50 (12.7) 0.020 (9.1) 8. N Female Straight Jack TC-400-NFC 3190-299 <1.25:1 (2.5) NA Solder Clamp N/S 1.6 (41) 0.75 (19.1) 0.119 (54.0) 9. N Female Straight Jack EZ-400-NF-X 3190-2818 <1.25:1 (2.5) NA Spring Finger Crimp N/G 1.8 (45) 0.66 (16.8) 0.105 (47.6) 10. N Female Bulkhead Jack EZ-400-NF-BH 3190-518 <1.25:1 (2.5) NA Spring Finger Crimp N/G 1.8 (46) 0.88 (22.4) 0.102 (46.3) 11. N Female Bulkhead Jack TC-400-NFC-BH (A) 3190-872 <1.25:1 (2.5) NA Solder Clamp A/G 1.8 (46) 0.88 (22.4) 0.145 (65.8) 12. N Male Straight Plug SC-400-NM 3190-1454 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.5 (38) 0.75 (19.1) 0.090 (40.8) 13. N Male Straight Plug TC-400-NMC 3190-277 <1.25:1 (2.5) Knurl Solder Clamp N/G 1.5 (38) 0.75 (19.1) 0.121 (54.9) 14. N Male Straight Plug EZ-400-NMH-X 3190-2590 <1.25:1 (10) Hex/Knurl Spring Finger Crimp A/G 1.5 (38) 0.89 (22.6) 0.103 (46.8) 15. N Male Straight Plug TC-400-NMH-X 3190-2626 <1.25:1 (10) Hex/Knurl Solder Crimp A/G 1.5 (38) 0.89 (22.6) 0.113 (51.3) 16. N Male Straight Plug EZ-400-NMK 3190-661 <1.25:1 (10) Knurl Spring Finger Crimp S/G 1.5 (38) 0.89 (22.6) 0.113 (51.3) 17. N Male Right Angle EZ-400-NMH-RA-X 3190-2638 <1.35:1 (6) Hex/Knurl Spring Finger Crimp A/G 1.87 (47) 1.42 (36.0) 0.177 (80.2) 18. N Male Right Angle TC-400-NMC-RA (A) 3190-870 <1.35:1 (2.5) Hex Solder Clamp A/G 1.8 (46) 1.25 (31.8) 0.150 (68.0) 19. N Male Reverse Polarity TC-400-NM-RP 3190-960 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.5 (38) 0.75 (19.1) 0.090 (40.8) 20. SMA Male Straight Plug TC-400-SM 3190-439 <1.25:1 (8) Hex Solder Crimp N/G 1.2 (29) 0.50 (12.7) 0.032 (14.5) 21. SMA Female Straight Jack TC-400-SF-X 3190-6174 <1.35:1 (6) NA Solder Crimp A/G 1.2 (29.7) 0.50 (12.7) 0.026 (12.0) 22. TNC Female Straight Jack EZ-400-TF-X 3190-3049 <1.25:1 (6) NA Solder Crimp A/G 1.8 (45.0) 0.55 (14.0) 0.074 (33.6) 23. TNC Female Straight Jack TC-400-TF-X 3190-3051 <1.25:1 (6) Knurl Solder Crimp A/G 1.8 (46.8) 0.60 (14.5) 0.630 (28.6) 24. TNC Female Reverse Polarity EZ-400-TF-RP 3190-795 <1.25:1 (2.5) NA Spring Finger Crimp A/G 1.8 (46) 0.55 (14.0) 0.074 (33.6) 25. TNC Male Reverse Polarity EZ-400-TM-RP 3190-794 <1.25:1 (2.5) NA Spring Finger Crimp A/G 1.7 (43) 0.59 (15.0) 0.074 (33.6) 26. TNC Male Straight Plug TC-400-TM-X 3190-2532 <1.25:1 (6) Hex/Knurl Solder Crimp A/G 1.9 (48) 0.67 (17.5) 0.075 (34.3) 27. TNC Male Straight Plug EZ-400-TM-X 3190-2533 <1.25:1 (6) Hex/Knurl Spring Finger Crimp A/G 1.9 (48) 0.67 (17.5) 0.075 (34.3) 28. TNC Male Right Angle TC-400-TM-RA-D 3190-2671 <1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.4 (35) 1.41 (35.8) 0.130 (59.0) 29. TNC Male Reverse Polarity TC-400-TM-RP-RA-D 3190-6147 <1.35:1 (6) Hex Solder Crimp A/G 1.4 (36.0) 1.20 (30.3) 0.130 (59.0) 30. UHF Male Straight Plug EZ-400-UM 3190-997 <1.25:1 (2.5) Knurl Spring Finger Crimp N/G 1.9 (48) 0.80 (20.3) 0.090 (40.8) 31. QN Female Straight Jack EZ-400-QNF-X 3190-2980 <1.25:1 (6) NA Spring Finger Crimp A/G 1.8 (45.0) 0.66 (16.8) 0.105 (47.6) 32. QN Male Straight Plug EZ-400-QNM-X 3190-2979 <1.25:1 (6) Hex Spring Finger Crimp A/G 1.5 (38.1) 0.89 (22.6) 0.103 (46.8) 33. QN Male Right Angle EZ-400-QNM-RA-X 3190-2981 <1.25:1 (6) Hex Spring Finger Crimp A/G 1.9 (47.0) 1.42 (36.0) 0.177 (80.2) 34. QN Male Straight Plug TC-400-QNM-X 3190-6212 <1.25:1 (6) Hex Solder Crimp A/G 2.0 (50.2) 0.74 (18.9) 0.103 (46.8)

EZ-400-UM3190-997 3190-2980

EZ-400-QNF-X

3190-6212TC-400-QNM-X

3190-2979EZ-400-QNM-X

3190-2981EZ-400-QNM-RA-X

30 31

TC-400-TM-RP-RA-D3190-6147

29 32

3433



TCO

M 4

00


Ground Kit GK-S400TT GK-S400TT Standard Grounding Kit (each) Hoisting Grip HG-400T HG-400T Laced Type (each)

Hardware Accessories

GK-S400TT

HG-400T

CR-4003190-830

Y17193190-202

RB-CST3192-086

TK-400EZ3190-1602

DBT-U3192-001

CT-400/300 - 3190-666 CCT-023192-165

Install Tools Part Stock Type Number Code Description Crimp Tool CT-U 3192-181 Crimp Handle (Dies Required) Crimp Dies Y1719 3190-202 .429" Hex Dies Crimp Tool CT-400/300 3190-666 Crimp tool for LMR 400 connectors Crimp Rings CR-400 3190-830 Crimp rings for TC/EZ-400 connectors (package of 10) Deburr Tool DBT-U 3192-001 Removes center conductor rough edges Cutting Tool CCT-02 3192-165 Cable end flush cut tool Strip Tool CST-400 3192-004 Combination prep tool for TCOM-400 crimp and clamp style connectors Replacement Blades RB-02 3192-166 Replacement blades for cutting tool Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all CST strip tools Tool Kit TK-400EZ 3190-1602 Tool kit for crimp and clamp style connectors (includes CCT-02, CST-400, CT-400/300, Tool Pouch)

CST-4003192-004

CT-U3192-181



TCO

M-5

00






Part Description Stock Part Number Application Jacket Color Code TCOM-500 Outdoor PE Black 55004 TCOM-500-FR Indoor-Riser CMR FRPE Black 55025


10 100 1,000 10,000Frequency (MHz)

TCOM®-500Low Loss Low Passive Intermod CoaxIdeal for… • -155 dBc Intermodulation Distortion • Low Loss UHF/Microwave Interconnect


Att

enu

atio

n(d

b p

er 1

00 f

eet)

100

10

1.0

0.1

• Wireless Base Station Interconnect • Flexible for Easy Routing






CCT-023192-165

RB-CST3192-086

Y1513190-465

CT-U3192-181

CST-5003192-075

Install Tools Type Part Number Stock Code Description Crimp Tool CT-U 3192-181 Crimp Handle Crimp Dies Y151 3190-465 .532" Hex Dies Cutting Tool CCT-02 3192-165 Cable end flush cut tool Prep Tool CST-500 3192-075 Prep tool for LMR-500 crimp/clamp connectors Replacement Blade RB-02 3192-166 Replacement blade for cutting tool Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all CST tools


1. 7-16 DIN Female Straight Jack TC-500-716F-X 3190-2906 <1.30:1 (6) NA Solder Crimp A/S 1.8 (45.9) 1.14 (29.0) 0.298 (135.0)

2. 7-16 DIN Male Right Angle TC-500-716M-RA-D 3190-6079 <1.30:1 (6) Hex Solder Crimp A/S 1.8 (44.9) 1.60 (41.6) 0.370 (168.0)

3. N Male Straight Plug TC-500-NMH-X 3190-2514 <1.35:5 (6) Hex/Knurl Solder Crimp A/G 1.8 (45) 0.87 (22.0) 0.099 (45.0)

4. N Male Right Angle TC-500-NMH-RA-D 3190-2513 <1.25:1 (6) Hex/Knurl Solder Crimp A/G 1.5 (39) 1.6 (42.0) 0.279 (127.0)

5. N Male Straight Plug TC-500-NMC 3190-377 <1.25:1 (2.5) Hex Solder Clamp S/G 2.1 (53) 0.92 (23.4) 0.228 (103.4)

6. N Male Right Angle TC-500-NMC-RA 3190-227 <1.35:1 (2.5) Hex Solder Clamp S/G 2.4 (61) 1.5 (38.1) 0.275 (124.7)

7. N Female Straight Jack TC-500-NFC 3190-215 <1.25:1 (2.5) NA Solder Clamp S/G 2.2 (56) 0.94 (23.9) 0.215 (97.5)

8. N Female Bulkhead Kit BHA-KIT 3190-223 <1.25:1 (2.5) NA NA NA NA NA NA NA NA 0.014 (6.4)

9. TNC Female Straight Jack TC-500-TF-X 3190-6010 <1.30:1 (6) NA Solder Crimp A/G 1.8 (44.5) 0.87 22.0 0.077 (35.0)

10. TNC Male Straight Plug TC-500-TM 3190-464 <1.25:1 (2.5) Hex Solder Crimp N/G 1.5 (38) 0.62 (15.7) 0.082 (28.1)

11. UHF Male Straight Plug TC-500-UMC 3190-354 <1.25:1 (2.5) Knurl Solder Clamp S/G 2.1 (53) 0.88 (22.4) 0.215 (97.5)


TCO

M-5

00

TC-500-NMC3190-377

TC-500-TF-X3190-6010

TC-500-716F-X3190-2906

TC-500-NMH-RA-D3190-2513

TC-500-NMH-X3190-2514

31 2

9

7

1110

85 6

4

TC-500-NMC-RA3190-227

TC-500716M-RA-D3190-6079

TC-500-NFC3190-215

BHA-KIT3190-223

TC-500-TM3190-464

TC-500-UMC3190-354



TCO

M-6

00






TCOM®-600Low Loss Low Passive Intermod CoaxIdeal for… • -155 dBc Intermodulation Distortion • Low Loss UHF/Microwave Interconnect • Wireless Base Station Interconnect • Flexible for Easy Routing


Part Description Stock Part Number Application Jacket Color Code TCOM-600 Outdoor PE Black 55005 TCOM-600-FR Indoor-Riser CMR FRPE Black 55018 TCOM-600-PUR Indoor/Outdoor PUR Black 55006 TCOM-600-PUR-DB Outdoor/ PUR Black 55041 Watertight



TCO

M-6

00

Att

enu

atio

n(d

b p

er 1

00 f

eet)

10.0

1.0

0.110 100 1,000 10,000

Calculate Attenuation = (0.080075) • FMHz + (0.000256) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)

Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F)

Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading

Frequency (MHz)





TCO

M-6

00


EZ-600-NMH-X3190-2627

TC-600-NMC3190-357 TC-600-NMC-RA

3190-233

EZ-600-NF-BH3190-616 TC-600-NFC-BH

3190-466

TC-600-NF-BH3190-589

EZ-600-TM3190-418

TC-600-UMC3190-213

EZ-600-716-MH3190-503

TC-600-716MC3190-502

TC-600-716M-RA3190-395

TC-600-716FC3190-375

119

75

4

10

86

321


1. 7-16 DIN Female Straight Jack TC-600-716-FC 3190-375 <1.25:1 (2.5) NA Solder Clamp S/S 1.1 (28) 1.00 (25.4) 0.249 (112.9)

2. 7-16 DIN Male Straight Plug EZ-600-716-MH 3190-503 <1.25:1 (2.5) Hex Spring Finger Crimp S/S 2.0 (51) 1.30 (33.0) 0.254 (115.2)

3. 7-16 DIN Male Straight Plug TC-600-716-MC 3190-502 <1.25:1 (2.5) Hex Solder Clamp S/S 2.0 (51) 1.30 (33.0) 0.347 (157.4)

4. 7-16 DIN Male Right Angle TC-600-716M-RA 3190-395 <1.35:1 (2.5) Hex Solder Crimp S/S 1.4 (36) 1.40 (35.6) 0.354 (160.8)

5. N Female Bulkhead Jack EZ-600-NF-BH 3190-616 <1.25:1 (2.5) NA Spring Finger Crimp S/G 2.4 (61) 0.88 (22.4) 0.195 (88.5)

6. N Female Bulkhead Jack TC-600-NF-BH 3190-589 <1.25:1 (2.5) NA Solder Crimp S/G 2.4 (61) 0.88 (22.4) 0.195 (88.5)

7. N Female Bulkhead Jack TC-600-NFC-BH 3190-466 <1.25:1 (2.5) NA Solder Clamp S/G 2.2 (56) 0.94 (23.9) 0.214 (97.1)

8. N Male Straight Plug EZ-600-NMH-X 3190-2627 <1.25:1 (8.0) Hex/Knurl Spring Finger Crimp A/G 2.1 (53) 0.92 (23.4) 0.164 (74.4)

9. N Male Straight Plug EZ-600-NMC-2-D 3190-2641 <1.25:1 (6) Hex/Knurl Spring Finger Clamp A/G 2.1 (53) 0.92 (23.4) 0.202 (91.6)

10. N Male Straight Plug TC-600-NMC 3190-357 <1.25:1 (2.5) Hex Solder Clamp S/G 2.1 (53) 0.92 (23.4) 0.208 (93.4)

11. N Male Right Angle TC-600-NMC-RA 3190-233 <1.35:1 (2.5) Hex Solder Clamp S/G 2.1 (53) 0.92 (23.4) 0.280 (17.9)

12. TNC Male Straight Plug EZ-600-TM 3190-418 <1.25:1 (2.5) Knurl Spring Finger Crimp S/G 1.7 (43) 0.59 (15.0) 0.112 (50.8)

13. TNC Male Straight Plug TC-600-TM-X 3190-2530 <1.25:1 (6) Hex/Knurl Solder Crimp A/G 2.3 (57.6) 0.75 (19.0) 0.100 (45.6)

14. TNC Male Straight Plug EZ-600-TM-X 3190-2531 <1.25:1 (6) Hex/Knurl Spring Finger Crimp A/G 2.3 (57.6) 0.75 (19.0) 0.100 (45.6)

15. BNC Male Right Angle TC-600-BM-RA 3190-2734 <1.30:1 (4) Knurl Solder Crimp A/G 1.8 (45.5) 1.54 (39.0) 0.164 (74.3) 16. UHF Male Straight Plug EZ-600-UM 3190-615 <1.25:1 (2.5) Knurl Spring Finger Crimp S/G 1.7 (43) 0.88 (22.4) 0.164 (74.4)

17. UHF Male Straight Plug TC-600-UMC 3190-213 <1.25:1 (2.5) Knurl Solder Clamp S/G 1.7 (43) 0.88 (22.4) 0.198 (89.8)

EZ-600-UM3190-615

TC-600-BM-RA3190-2734

12

13

17

15 1614

EZ-600-NMC-2-D3190-2641

TC-600-TM-X3190-2530

EZ-600-TM-X3190-2531



TCO

M-6

00

GK-S600TT

CS-A600T, CS-60120T, CS-60170THG-600T

CB-600T Hanger Block Hardware

Y17203190-203

CST-6003192-052

RB-CST3192-086

Accessories Part Stock Type Number Code Description Ground Kit GK-S600TT GK-S600TT Standard Grounding Kit (each) Hoisting Grip HG-600T HG-600T Split/Laced Type (each) Cold Shrink CS-A600T CS-A600T Cable to Antenna Junction (each) Cold Shrink CS-60120T CS-60120T LMR-600 to -1200 Junction (each) Cold Shrink CS-60170T CS-60170T LMR-600 to -1700 Junction (each) Standard Entry Port Cushion SC-600T-3 SC-600T-3 Three Cables (each) Standard Entry Panels Full Range of Port Styles/Combinations Available Hanger Blocks CB-600T CB-600T Dual Cable Support Block (kit of 10) Hanger Block Supporting Hardware Complete Range of Supporting Hardware & Adapters Available

DBT-U3192-001

Install Tools Part Stock Type Number Code Description Crimp Tool CT-600 3192-170 Crimp tool for LMR-600 connectors Crimp Tool CT-U 3192-181 Crimp Handle (Dies Required) Crimp Dies Y1720 3190-203 Standard .610" Hex Cutting Tool CCT-02 3192-165 Cable and flush cut tool Deburr Tool DBT-U 3192-001 Removes center conductor rough edges Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all CST strip tools Wrench WR600 3190-1435 15/16" Box Wrench (2 required for EZ-600-NMC-2) Strip Tool CST-600 3192-052 Combination prep tool for T-COM 600 crimp/clamp connectors Tool Kit TK-600EZ 3190-1602 Tool kit for crimp/clamp connectors (includes CCT-02, CST-600, CT-600, Tool Pouch)

CCT-023192-165

WR6003190-1435

TK-600-EZ3190-1602

CT-U3192-181

CT-6003192-170

SC-600T

ideal for… -155 dbc intermodulation distortion low loss … · types, reverse polarity, and a...

Documents