icsbm 2019 · 2019-07-19 · durability parameters of self-compacting concrete with binary and...

ICSBM 20192nd International Conference on Sustainable Building Materials

August 12-15, 2019 Eindhoven, The Netherlands

In cooperation withWuhan University

of Technology

Organized by Eindhoven University

of Technology

and supported by

Sponsored by:

Wednesday Afternoon Session 2 (16:00-17:30)Collegezalen, Auditorium Basement

Room Starting Time Presentation Title

Auditorium Collegezaal

5 Waste

recovery treatments and

valorization

16:00 Stress-strain behaviour of steel confined recycled aggregate concrete - M.J. Munir, S.M.S. Kazmi, Y.F. Wu, I. Patnaikuni.

16:15

Influence of different recycled concrete aggregate treatment methods on the perfor-mance of concrete: a comparative assessment - S.M.S. Kazmi, M.J. Munir, Y.F. Wu, I. Patnaikuni.

16:30 Effects of Recycled Aggregates on Concrete Compressive Strength - N. Siddiqui, M. Nasir, I. Nasir, D. Memon.

16:45 Sustainable Recycling of Concrete Fine from Demolition - R. Meglin, S. Gilg, D. Wlodarczak, S.Stürwald, S. Kytzia.

17:00 Qualification of the residual reactivity of compacted recycled aggregates - Y. Hou, P.Y. Mahieuxi, J. Luxi, P. Turcry, A. Ait-Mokhtar.

17:15

Carbonation of recycled concrete aggregates: the effects of carbonation conditions on key aggregate properties - A. Gholizadeh-Vayghan, A. Bellinkx, R. Snellings.


6 Biogenic

materials and Functionalyz-ed materials

16:00 Functionalization of fibres for cement-based materials – selected test method - J. von Werder, A. Gardei, B. Meng.

16:15 The influence of cellulose-based micro and nanomaterials on early-age properties of cement grouts - H. Karimi, Q.L. Yu, H.J.H. Brouwers.

16:30 Biosorption of heavy metal ions of lead and zinc by Trichoderma reesei based on response surface method - Y. Sun, R. Yu, Z. Shui, D. Qian, B. Rao, J. Huang.

16:45 Using chitosan for chemical surface modification of cellulose nanofiber intended for CO2 adsorption - S. Sepahvand, M. Jonoobi, A. Ashori, F. Gauvin, H.J.H. Brouwers, Q. L. Yu.

17:00 A concrete composite from biologically based binders and mineral aggregates for con-structional 3D-printing - J. Christ, H. Koss, L.M. Ottosen.

17:15 Durability of photocatalytic mortars - A.M. Kaja, H.J.H. Brouwers, Q.L. Yu.

Metaforum garden

(Open area)

18:00-21:00

Dinner activity 3 ICSBM 2019 BBQ

IntroductionThe building sector is by far the largest consumer of raw materials and producer of hu-man-made materials. From a sustainability and circularity point of view, the effects of this demand can among others be mitigated using biogenic resources, smart material design, enhanced durability, functionalization, reuse and recycling, and the use of side streams (“waste”). The conference addresses this challenge starting from a scientific approach: building materials science being a syncretic discipline hybridizing mineralogy, ceramics, solid-state physics, chemistry, metallurgy, and biology. Advanced characterization and treatment methods, together with novel technologies and modelling tools, are vital for the study and improvement of the complete life cycle of building materials, from raw ma-terials to production, use, and recycling. Following the success of the previous conference in Wuhan in 2017, we are pleased to welcome you at the 2nd International Conference on

Sustainable Building Materials, ICSBM 2019, in Eindhoven, the Netherlands.

Main TopicsDuring the conference, five main topics will be discussed:

New cementitious binders Engineered OPCs, supplementary cementitious bind-ers, alkali activated binders, calcium sulfoaluminate cements (CSA), magnesium oxychlo-ride cement (MOC), calcined clays, hydration, modelling, performance, durability. Green materials/products concrete, autoclaved aerated concrete, gypsum wall-boards, fired clay, unconventional clays and aggregates, alternative chemical admixtures, (repair) mortars.

Waste recovery, treatments and valorisation Municipal solid waste incineration residues, steel converter slags, mine tailings, paper sludge incineration ashes, biomass incineration ashes, characterization of waste residues, enhancing treatments (physical, chemical and thermal), alternative raw materials, second life, environmental impact, modelling of hydration and leaching.

Biogenic materials: Biofibers, bioaggregates, alternative natural fibers, agricultural and biorefinery residues.

Functionalized materials Nano-engineered, coated, photocatalytic, self-cleaning, self-healing, hydrophobic.

1 14

Conference Venue: TU/e Campus

Daily activities of ICSBM 2019 will take place in the Auditorium (Building 1, in red), while the BBQ dinner on Wednesday 14th is organized at the Metaforum (Building 5, in yellow). Part of the 3D printing workshop will take place in Vertigo (Building 6,

in purple).


Room Starting time Presentation Title


3 New

cementitious binders

16:00

Chloride Ingress and Degradation of Portland Cement Mortar Exposed to Seawater Attack Coupling with Drying-wetting Cycle - S. Cheng, Z. Shui, T. Sun, X. Gao.

16:15 Influence of heat treatment and mechanical activation on reactivity of natural pozzolan for geopolymer synthesis - R. Firdous, D. Stephan.

16:30 Application of Krstulovic-Dabic model on early hydration analysis of Portland cement under Mg2+ influence - X.S. Li, Z.H. Shui, X. Gao.

16:45 Role of Mg2+ stabilized amorphous calcium carbonate on the early reaction of sodium carbonate activated slag - B. Yuan, Q.L. Yu, W. Chen, H.J.H. Brouwers.

17:00

Manufacturing high-performance supplementary cementitious materials from pyroclastic deposit through dry gravity classification and pulverization - A. Tomoyose, T. Noguchi, K. Sodeyama, K. Higashi.

17:15 Eco-efficiency in cement use analysed by the concept of distance among particles in concrete phases - M.F.L. Menezes, R.G. Pileggi, M. Rebmann, C. Massucato.


4 Greened materials

16:00 Evaluation of thermal properties of glass fibre reinforced fly ash-cement roofing tiles - G.L.M Ariyadasa, S.U Adikary, S.S.K Muthuratne.

16:15 Assessment of mine tailings as precursors for alkali-activated materials for on-site appli-cations - R. Obenaus-Emler, M. Falah, M. Illikainen.

16:30 Effect of Calcining Temperatures of Bauxite on the Compressive Strength of Volcanic Ash-based Geopolymer Mortars - L.N. Tchadjié, S.O. Ekolu.

16:45 Eco-synthesis of zeolite from coal fly ash - K.M. Klima, Q.L. Yu, H.J.H. Brouwers.

17:00

Effect of carbonation on chloride binding behaviors and hydration product formation of metakaolin-ground waste coral blended marine mortars - Y. Wang, Z. Shui, X. Gao, Y. Huang, R. Yu, Q. Song.

17:15 Rejuvenators for High RAP Asphalt Mixes and New Preservation Techniques for Open-Graded Pavements - S.N. Nahar, F.B. Elzinga, B.J. Lommerts.

13 2

TU/e

Cam

pus m

apC

onfe

renc

e ar

ea d

etai

l

Auditorium (Building 1)The Auditorium will host the main activities of ICSBM 2019.

Keynote lectures take place by the Blauwe Zaal, while the four parallel sessions are organized by the Collegezalen (3, 4, 5, 6) together with the workshops.

Lunches and dinners will be served in the Senaatszaal.

College zaal 5

Parallel Session

College zaal 6

Parallel Session

College zaal 3

Parallel Session

College zaal 4

Parallel Session

Toilets

Entrance and stairs for the upper floor

Stairs for theupper floor

Blauwe Zaal Keynote lectures

Senaats Zaal Lunch and dinner

lounge

Refereshment area Stairs for

underground floor

Entrance and stairs for underground floor

Toilets

Toilets

Refreshment area

Reception desk Wardrobe

Poster Area

Auditorium Ground floor

Auditorium Basement


Golden sponsors presentation - ELTOMATION - Wood cement board plant - Blauwe Zaal, Auditorium (14:00-14:30)

Innovative production technologies and applications in the field of Wood Cement Products - E.J. van Elten



3 New cementitious

binders

14:30 Recent Sustainable Development of Ultra-High Performance Concrete (UHPC) - R. Yu, Z. Liu, X. Wang, Q. Song, Z. Shui, C. Hao.

14:45 Isothermal Calorimetric Study on Heat Evolution and of Apparent Activation Energy of Alkali-activated Slag/Fly ash Pastes - S. Zhang, Y. Zuo, Z. Li, G. Ye.

15:00 Pozzolanic reactivity of size-classified siliceous fly ashes - R. Snellings, H. Kamyab, S. Joseph, P. Nielsen, M. Loots, L.Van den Abeele.

15:15Depth of penetration for steel-tube-confined concrete targets penetrated by rigid sharp-nosed projectiles - Q. Tan, D. Song, Z. Jiang.


4 Greened materials

14:30 Effect of expansive agent on shrinkage and Long-term Performance of SCC - G.Ling, Z. Shui, T. Sun, X. Gao, X. Li, G. Wang.

14:45 Durability parameters of self-compacting concrete with binary and ternary combina-tions of Portland cement, limestone filler and metakaolin - L.R.M. Miranda, V.M.S. Capuzzo.

15:00 Phase and dimensional stability of volcanic ash-based phosphate geopolymers at elevated temperatures - J.N.Y. Djobo, A. Elimbi, D. Stephan.

15:15Preparation of alkali activated mortars based on phosphate washing waste: effect of calcination temperature - R. Dabbebi, J.L. Barroso de Aguiar, S. Baklouti.


5 Waste

recovery treat-ments and

valorization

14:30 Synthesis optimization for hydrophobic surface modification of MSWI bottom ash fines - Q. Alam, T. Dezaire, F. Gauvin, H.J.H. Brouwers.

14:45

Screening Untreated Municipal Solid Waste Incineration Fly Ash for Use in Ce-ment-Based Materials – Chemical and Physical Properties - B.A.R. Ebert, B.M. Steenari, M.R. Geiker, G.M. Kirkelund.

15:00 Methods for determining and tracking the residual cement paste content of recycled concrete - P.M.F. van de Wouw, M.V.A. Florea, H.J.H. Brouwers.

15:15The impact of slag fineness on the reactivity of blended cements with high-volume non-ferrous metallurgy slag - V. Hallet, N. De Belie, Y. Pontikes.


6 New cementi-tious binder

14:30 Stress-strain behaviour and strength properties of ambient cured geo-polymer con-crete (GPC) - M.T. Junaid, A.S. Karzad, S. Altoubat.

14:45 Experimental investigation on RC one-way slabs subjected to contact explosion - Y. Hu, D. Song, Z. Jiang, Y. Huang, Z. Wu.

15:00 Concrete with high-purity volcanic glass powder manufactured from pyroclastic deposit through dry gravity classification and pulverization - T. Noguchi, A. Tomoyose, K. Sodeyama, K. Higashi.

15:15 Super-hydrophobic magnesium oxychloride cement (MOC): from structural control to self-cleaning property evaluation - Z.Y. Qu, F.Z. Wang, Q.L. Yu, H.J.H. Brouwers.

3 12

1. In your conference bag you will find 16 coins, necessary for ordering drinks during lunches and dinners. If you want more drinks you can always buy

additional coins by the reception desk! The price for one coin is 1,50 euros.

Beverage prices:

1 coin: Soft drinks, beer, and wine (red or white) 2 coins: Liquors (vodka, gin, rum, whiskey, etc.)

2. TU/e policy since September 2018 does not allow the use of cash at the campus. Therefore for buying extra food and drinks a debit or credit card is needed.

3. Please, subscribe at the reception desk (if you did not subscribe already) to one of our workshops.

There is only room for a limited number of participants.

4. Presenters: please upload your powerpoint presentation (USB stick) 15 minutes before the beginning of your session.

An assistant will be available in case you need help.

Poster presenters: Stay next to your poster during the lunch break of Wednesday August 14th to introduce your contribution to the participants.

5. Reception desk opening hours:

Mornings 7:45-9:15Afternoons 12:30-14:15Evenings 17:30-21:15

6. The paper selected for journal pubblication in Construction and Building Materials and SN Applied Science will be notified by

September 1st , 2019.

7. First aid is available at the reception desk.

8. Wishing you a great ICSBM 2019!

Conference practical information Monday Afternoon Session 2 (16:00-17:30)

Collegezalen, Auditorium Basement



5 Waste


valorization

16:00 Production of Synthetic Wollastonite Mineral By Using Industrial Waste Materials - H.E. Yücel, H.Ö. Öz, O. Ersoy, M.Güneş, Y. Kaya.

16:15 Production of Ternesite clinkers from industrial by-products, the effect of clinkerization parameters - N. Stavroulakis, A. Papadimitriou, A. Charitou, S. Antiohos, A. Stratakis, I. Karatasios, S.Tsimas.

16:30 Characteristics of mechanically activated converter steel slag - W. Franco Santos, K. Schollbach, Q.L. Yu, S. van der Laan, H.J.H. Brouwers.

16:45 Long term weathering of converter slag - K. Schollbach, S. van der Laan.

17:00 Characterization of Air granulated converter slag and its leaching behavior - M.J. Ahmed, K. Scholbach, M.V.A. Florea, S. Van Der Laan, H.J.H Brouwers.

17:15 Increasing the reactivity of modified ferro silicate slag by chemical adaptation of the pro-duction process - P. P. Sivakumar, L. Arnout, T. Lapauw, E. Gruyaert, N. De Belie, S. Matthys.


6 Biogenic

materials and Functionalyzed

materials

16:00 A silica aerogel synthesized from olivine and its application as a photocatalytic support - Y.X. Chen, Y. Hendrix, K. Schollbach, H.J.H Brouwers.

16:15 Study on Viability of Bio-Concrete on the Concept of Self-Healing - S. Girish, T. Soumya.

16:30 Study on Self-healing Cementitious Materials with Hydrogels Encapsulating Phosphate - X. Liu, Y. Tang, Z. Liu, W. Chen, Q. Li, W. Chen.

16:45 Investigating the efficiency of “in-house” produced hydrogels as internal curing agents in cement pastes - J.R. Tenório Filho, E. Mannekens, D. Snoeck, N. De Belie.

17:00 Self-cleaning and air purification performance of Portland cement paste with low dosage of nanodispersed TiO2 coatings - Z. Wang, F. Gauvin, P. Feng, H.J.H. Brouwers, Q.L. Yu.

17:15 Reduced graphene oxide-coated copper foam composite cathode for the microbial elec-trosynthesis of acetate from carbon dioxide - P.L Tremblay, T. Zhang.

Auditorium Senaats Zaal

18:00-21:00

Dinner activity 2 Buffet

11 4

Monday Afternoon Session 2 (16:00-17:30)Collegezalen, Auditorium Basement



3 New


16:00 Impact of steel fibre content on the fibre network structure of UHPFRC - Q. Song, Z. Shui, R. Yu, S. Rao.

16:15 Investigation of the zonation of thermally treated UHPC - M. Voigt, J. von Werder, B. Meng.

16:30 Recent development on sustainable ultra-high performance concrete design with low cement consumption: a review - P.P. Li, Q.L. Yu, H.J.H. Brouwers.

16:45 Ballistic performances of multi-layered Ultra-high Performance Fibre Reinforced Con-crete - Y.Y.Y. Cao, M. Sluijsmans, Q.L. Yu, H.J.H. Brouwers.

17:00 Neutron radiography to study water ingress via the interlayer of 3D printed cemen-titious materials - J. Van Der Putten, M. Azima, P. Van den Heede, T. Van Mullem, G. De Schutter, K. Van Tittelboom.

17:15

Effect of MgO, nitrate intercalated LDH and Calcined-LDH on chloride resistance of alkali-activated fly ash/slag mortar - T. Liu, Y. Chen, Q.L Yu, H.J.H. Brouwers.


4 Greened materials

16:00 CSA as A Revisited Vernacular Technique for Earth Stabilization - B.Cicek, N.P. Martins, C. Brumaud, G. Habert.

16:15 Study on the preparation of high quality autoclaved aerated concrete made from stone- sawing mud - H. Wan, Y. Hu, G. Liu, J. Liu, Y. Qu.

16:30 Fire resistance of aerated alkali-activated cements - J. Rodriguez-Sanchez, M. Fedorciuc-Onisa, H. Kinoshita, J.L. Provis, S. MacLachlan.

16:45 Converter slag - ladle slag - gypsum ternary binder – effect of CaO slaking - E.D. Adesanya, K. M. Ohenoja, P. K. Kinnunen, M. H. Illikainen.

17:00 Mechanochemically activated clay as a sustainable cementitious binder - I. Tole, K. Habermehl-Cwirzen, A. Cwirzen.

17:15 Experimental Studies on Fly Ash Gypsum Slurry - V. Revathi, S. Jayanthi.

Poster Session - Poster Area, Auditorium Alternative binders and greened materials

Wednesday August 14th, 2019 (12:30-14:00)

Performance evaluation of functional alkali activated lightweight composites produced

with an eco-silica source based activator

X. Gao, Q.L.Yu.

Electrodialytic treated MSWI fly ash use in clay bricks

L. Skevi, G.M. Kirkelund.

Assessment of compressive strength and water absorption of hollow concrete blocks

manufactured with recycled paper in the mixture

M. de Sousa Prazeres, E. Aurélio Barros Aguiar.

Influence of the Water- and Foaming Agent Dosage on Hardened Autoclaved Aerated

Concrete C. Straub, M.V.A. Florea, G. Quercia, H.J.H.

Brouwers.Multi-factor Coupling Model of Concrete Surface Chloride Concentration in a salt

lake

L.M. Zhang, J. Li, H.Yu, Z.Y. Zhang.

Early hydration of C2S doped with combination of S and Li

M. Boháč, T. Staněk, A. Rybová, A. Zezulová, F. Bellmann, H.-M. Ludwig.

Polycarboxylate Superplasticizer Modified Fly Ash: Its Effects on Fluidity and

Mechanical Properties of Cement Paste

P. Liu, M. Qub, F. Wanga, G. Huc, L. Yanga, W. Zhanga.

Uncovering Strength Developing Regularities of Ultra High

Performance Concrete Cured under High Temperature

Z. Liu, Z. Shui, R.Yu, Q. Song.

Influence of External Water Introducing by Coral Sand on Autogenous Shrinkage and

Microstructure of UHPC K. Liu, Z. Shui, R.Yu, S. Yi.

5 10

Influence of Particle Size Distribution and MSWI Bottom Ash Aggregate Replacement

in Zero-Slump Concrete

P.M.F. van de Wouw, M.V.A. Florea, H.J.H. Brouwers.

Leaching behaviour of metals from mine tailings utilized as partial cement replace-ment in cement-based building materials

A.M.T. Simonsen, Pernille E. Jensen.

Compressive Strength of Concrete with Water Purification Sludge

C.H. Wu, H.J. Chen.

Mechanism and kinetics of binding of meat and bone meal ash into the Portland cement

clinker

T. Staněk, P. Sulovský, M. Boháč.

Water absorption methods for fine recycled concrete aggregates

L. Green Pedersen, M.R. Geiker, L. M. Ottosen.

Quantification of remaining unhydrated cement in concrete waste

D. Kulisch, A.Katz.

The leaching characteristics of chelatant- and water-based treated

Municipal Solid Waste Incineration (MSWI) fly ash

E. Loginova, M. Proskurnin, H.J.H. Brouwers.

Prewashed wood ash for utilization in ce-ment-based materials

N.M Sigvardsen, J. Pedersen, L.M. Ottosen.

The course of water absorption and desorption from superabsorbent polymers (SAP) in cemen-

titious environment

M. Kalinowski, P. Woyciechowski.

Use of peach shell as lightweight aggregate in pervious concrete

F. Wu, Ch. Liu, L. Zhang, Y. Lu, Q.L. Yu.

Poster Session - Poster area, Auditorium Waste valorization and bio-functionalized materials Wednesday August 14th, 2019 (12:30-14:00)

Monday Afternoon Session 1 (14:00-15:30)Collegezalen, Auditorium Basement

Golden sponsors presentation - TATA STEEL - Blauwe Zaal, Auditorium (14:00-14:30)

Circular Economy , key to sustainable construction - B. (Bauke) Hoekstra Bonnema



3 New


14:30 HYDCEM: A new cement hydration model - N. Holmes, D. Kelliher and M. Tyrer.

14:45 The effect of MgO on the structure and chemical composition of C-S-H gels - Y. Tang, W. Chen.

15:00 Understanding Hydrogen Bonding in Calcium Silicate Hydrates - B. Li, H.J.H. Brouwers, Q.L. Yu, W. Chen.

15:15 Safe Use of Sustainable Building Materials: A reappraisal of Adobe - T. Li Piani, J.Weer-heijm, L. Koene, L. J. Sluys.


4 Greened materials

14:30 Sustainability of Durable Concrete Reinforced with Aluminum Metal - H. Justnes.

14:45 Experimental development of alternative lightweight concretes - D. Zwicky.

15:00 The Effect of NaOH Concentration on the Mechanical and Physical Properties of Alkali Activated Fly Ash-Based Artificial Lightweight Aggregate - P. Risdanareni, K. Schollbach, J. Wang, N. De Belie.

15:15Production of bioplastic from CO2 with light energy by coupling Cupriavidus necator with inorganic photocatalysts - T. Zhang, P.L. Tremblay.


5 Waste


valorization

14:30 Sewage sludge ash as resource for phosphorous and material for clay brick manufacturing - L.M. Ottosen, I.M.G. Bertelsen, P.E. Jensen, G. M. Kirkelund

14:45 Treatments to improve biomass fly ash quality - K. Ohenoja, M. Illikainen.

15:00 Qualification of Biomass Derived Ashes for Application as a Cement Replacement and Quantification of Biomass Streams in The Netherlands - N. Mühleisen, H. Jonkers, L. Tosti.

15:15 Sodium hydroxide/carbonate activated GGBS-fly ash mortars incorporating recycled waste glass - G. Liu, M.V.A. Florea, H.J.H. Brouwers.


6 New


14:30 Manufacturing high-performance supplementary cementitious materials from pyroclastic deposit through dry gravity classification and pulverization - A. Tomoyose, T. Noguchi, K. Sodeyama, K. Higashi.

14:45 Microstructural changes in porosity due to carbonation of fly ash blended pastes as-sessed by dynamic vapour sorption - Y. Villagrán-Zaccardi, N. Alderete, N. De Belie.

15:00 Effect of calcium hydroxide on the hydration of sulphoaluminate cement with high concentration of borate solution - Q. Li, H. Ma, X. Ling, B. Yuan, Wei Chen.

15:15Evaluation of calcined dredged sediments as supplementary cementitious materials - H. Kazemi-Kamyab, L. Van den Abeele, M. Henry, L. Haouche, R. Snellings.

The recycling potential of waste wood into wood-wool/cement composite

F. Berger, F. Gauvin, H.J.H. Brouwers.

Reinforcing mechanisms of coir fibers in light-weight concrete

X. Zhang, F. Gauvin, H.J.H. Brouwers.

The Optimized Application of Treated MSWI Bottom Ash in Concrete Mixtures

M.V.A. Florea, A. Keulen, H.J.H. Brouwers.

9 6

Keynote speakers ICSBM 2019Every morning from 9 to 12:30 a.m. lectures will be given by 16 of the world most well-known researchers in the field of building materials.

Prof. Karen ScrivenerEPFL, Switzerland

Prof. Zongjin LiUniversity of Macao, China

Prof. Harald JustnesSINTEF, Norway

Prof. Caijun ShiHunan University, China

Dr. Jan van DamWageningen University and Research, The Netherlands

Prof. Shinichi IgarashiKanazawa University, Japan

Prof. Herbert PöllmannMartin Luther University Halle-Wittenberg, Germany

Prof. Peiyu YanTsinghua University, China

Dr. Wolfram SchmidtBAM, Berlin

Prof. Zhonghe ShuiWuhan University of Technology, China

Prof. Christoph GehlenTU Munich, Germany

Prof. Jørgen SkibstedAarhus University, Denmark

Prof. Alexander Van HerkA-STAR, Singapore

Prof. Mirja IllikainenUniversity of Oulu, Finland

Dr. Mohammed SonebiQueen’s University, Great Britain

Prof. Mark TyrerCoventry University, Great Britain

Time Location Monday 12 August 2019

Tuesday 13 August 2019

Wednesday 14 August 2019

Thursday15 August 2019

7:45-9:00 Reception desk Registration and conference kit distribution Registration and conference kit distribution Registration and conference kit distribution Registration and conference kit distribution

8:00-8:50 Refreshment area Good mornign Coffe

8:55-9:00 Blauwe zaal Introduction speech - Prof. Theo SaletProf. Herbert Pöllmann

Natural and artificial Pozzolanes – Industrial residues and natural supplementary materials

Prof. Shinichi Igarashi Techniques for analyzing microstructures

Prof. Zongjin Li Application of new concrete processes and

materials9:00-9:45 Blauwe zaal Prof. Karen ScrivenerHydration of Portland cement

9:45-10:30 Blauwe zaalProf. Harald Justnes

Performance of SCMs – Chemical and physical principles

Prof. Mirja IllikainenUtilization of waste and residues in building materials

Prof. Jørgen Skibsted NMR spectroscopy of SCMs-cement blends

Prof. Peiyu Yan Use of Supplementary Cementitious Materials to

Manufacture High Performance Concrete

10:30-11:00 Refreshment area Coffee break

11:00-11:45 Blauwe zaalProf. Caijun Shi

On the setting and hardening control of alkali-activat-ed slag cements

Dr. Mohammed Sonebi Natural fibers in building materials

Prof. Alexander Van Herk Functional coatings for building materials

Prof. Mark Tyrer Energy Efficiency of building materials

11:45-12:30 Blauwe zaal Dr. Jan van DamBiobased building materials

Prof. Zhonghe Shui Cementitious materials for marine structures

Dr. Wolfram Schmidt Bio-based admixtures

Prof. Christoph Gehlen Specification of building materials for in service

durability

12:30-14:00 Lunch break

Morning Keynote Session (Auditorium)

7 8

icsbm 2019 · 2019-07-19 · durability parameters of self-compacting concrete with binary and...

Documents