We are still receiving new paper titles and two-page short papers, students or junior faculty

members have priority, but please hurry, do this well before July 1, 2011 deadline, urgent

ICCE-19

July 24-30, 2011 in Shanghai, China

www.icce-nano.org

Preliminary list of

two-page short papers received

Dated June 19, 2011

If you are a participant but cannot find your paper, it is because

(item 1) you submit only paper title, one paragraph abstract is not enough, we need detailed two-

page short paper, each page two coluums format

(item 2) if there are clerical errors, please correct them. If you submitted two page short paper,

but cannot find in this list, please immediately correct this, and inform dhui@uno.edu

(item 3) if you have not submitted two-page short papers, please do so immediately or soon, so

that upon peer reviewed, we can then include your paper in this list)

ICCE-19 KEYNOTES

Clinical Nursing Program With Imbedded Knowledge In Biomaterials, Implant

Technologies And Medical Sciences... Linda T. ADAMS (NCAT, Greensboro, NC)

Status In The Growth Of Anisotropic Oxide Thin Films And Heterostructures For Future

Electronics Kazuhiro ENDO (Kanazawa I.T. Japan), Petre Badica (NIMP, Bucharest,

Romania), Hiroshi Kezuka (Tokyo U.T., Japan), Shunichi Arisawa (NIMS, Tsukuba,

Japan), Tamio Endo (Mie U. Japan)

Carbon Nanopaper Enabled Structural and Multifunctional Nanocomposites

Jihua GOU, Jinfeng Zhuge, Fei Liang (U. Cen. Florida, Orlando)

Directions For Hypersonic Thermal Protection Systems And Materials Severed At Ultra-

High-Temperature Environment Jiecai HAN, Changqing Hong, Xinghong Zhang,

Ping Hu (Harbin I.T., China)

Natural Fibers for Applications

Alan LAU (U. Southern Queensland, Brisbane, Australia)

Novel Structural And Magnetic Effects In Passivated Antiferromagnetic Transition Metal

Monoxides: Inverted Antiferromagnetic (AFM)/Ferrimagnetic (FIM), Core/Shell

Nanoparticles Josep NOGUES, A. Lopez-Ortega, M. Estrader (UAB, Bellaterra,

Spain), D. Tobia, E. Winkler (Bariloche, Argentina), S. Estrade (U. Barcelona, Spain),

I. Golosovsky (St. Petersburg, Russia), J. Sort (Bellaterra, Spain), G. Salazar-Alvarez

(Stockholm, Sweden), F. Peiro (U. Barcelona), S. Suriñach (U. Auto Barcelona),

R.D. Zysler (Bariloche, Argentina), M.D. Baro (U. Auto Barcelona)

Advancement of Basalt Fibers towards Structural Applications

Zhishen WU (Southeast U., Nanjing, China and Ibaraki, Japan)

BIO COMPOSITES

Human Bone As Composite Material

M.E. Aksoy (Min. of Health, Istanbul, Turkey), I. Kutbay, M. Usta (Gebze I.T., Turkey),

C. Bindal (Sakarya U.), A. Gul (Istanbul T.U.), A. Hikmet UCISIK (Bogazici U., Bebek-

Istanbul, Turkey)

Diagrams For Quasi-Brittle Fracture Of Bimaterial

V.M. KORNEV, V.D. Kurguzov, N.S. Astapov (Novosibirsk, Russia)

Fabrication of Poly(propylene carbonate)/Gelatin Composite via Layer-by-Layer Assembly

for Cytocompatibility Assessment Xia ZHONG, Fariba Dehghani (U. Sydney,

Australia)

Electrospun Nanofibers For Artificial Scaffolds And Reinforcement Of Rubbers

Ulrike Wangenheim, Ulrich Giese, Robert H. SCHUSTER (DIK, Hannover, Germany)

Simulation For Exogenous Microbial Depolymerization Of Polyethylene Glycol

Hongmei BAO, Masaji Watanabe (Okayama U., Japan), Fusako Kawai

(Kyoto I.T., Japan)

Modeling And Simulation For Microbial Depolymerization Of Polyethylene Glycol

Masaji WATANABE (Okayama U., Japan), Fusako Kawai (Kyoto I.T., Japan)

Poloxamer-Modified Montmorillonite Clay as Potential Antibacterial Agent Against E. coli

Pao-Chi LIAO, Yi-Han Liao, Yung-Tang Nien (Nat. Cheng Kung U., Tainan)

Replacement Of Local Osteochondral Defects As Hybrid Bio-Composite

Jaroslav LISAL, Miroslav Petrtyl (Czech T.U>, Prague), Zdenek Bastl (ASCR),

Ladislav Senolt (Charles U., Prague), Zdenek Krulis (ASCR), Pavel Cerny

(Ortotika, Ltd. Czech Rep.)

Nano Technology Modification Of Natural Fibres For Bio-Composites

Dasong DAI, Mizi Fan (Brunel U., UK)

Shape Optimization Of Fiber In Biomaterials

Petr P. PROCHAZKA, Martin J. Valek (Czech T.U., Prague)

Use Of Acetylated Starches In Biodegradable Plastics And Composites With

Montmorillonite Petr DUCHEK, Jan Schubert (U. West Bohemia, Czech Rep.)

Nanoscale Reinforcement Of Light Weight Bio-Based Foams Using Rice Straw Nanofibers

Chularat KRONGTAEW, Saniwan Srithongkham, Lalita Vivitchanont.

Siritorn Nakchamnan (Mahidol U., Nakorn Pathom, Thailand)

Schizophyllum commune As Nano-Factory For Biosynthesis Of Silver Nanoparticles

Mat Don MASHITAH, Yen San, Chan (U. Sains Malaysia, Pulau Pinang)

Preparation Of Injectable Artificial Bone Fabricated From Hydoxyapatite / Collagen

Nanocomposite Akinori Kochi (Okayama U., Japan), Masanori KIKUCHI

(NIMS, Tsukuba, Japan), Yuki Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka

(Okayama U., Japan)

Ultrastructural Analysis Of Synthetic Hydroxyapatite With Preferred Orientation To

C-Plane Using High-Resolution Transmission Electron Microscopy

Zhi ZHUANG, Mamoru Aizawa (Meiji U., Japan)

Silver Nanoparticles Based Materials For Antimicrobial Treatment Of Medical Leathers

And Sheepskins Carmen GAIDAU (Leather & Footwear R.I., Bucharest, Romania),

Aurora Petica (INCDIE, Bucharest, Romania), Wuyong Chen (Sichuan U., Chengdu,

China, Lucretia Miu (Bucharest, Romania)

Fabrication And Micromechanical Testing Of Polymer Micro-Grippers With Compliant

Force Sensing Ruth E. MACKAY (U. Dundee, UK), H.R. Le (U. Plymouth,UK),

L. Zhang (U. Dundee)

Promising Materials Made Of Bio-Hybrid Polyurethane

Ernie Suzana ALI (U. Sains Islam Malaysia), Sahrim Hj Ahmad, Syazana Ahmad Zubir

(Int. U. Malaysia, Selangor)

Sensitive Label-Free Impedimetric Immunosensor Based On Polypyrrole For

Human Chorionic Gonadotropin Hormone Detection

T.N. Lien TRUONG (Hanoi U.T., Vietnam), Miyuki Chikae, Yoshiaki Ukita,

Yuzuru Takamura (JAIST, Ishikawa, Japan) chair

Engineering Of Concentrated Emulsions As A Drug Carrier System For Pharmaceutical

Application Lihong TONG, Mont Kumpugdee-Vollrath, Jens-Peter Krause

(U. Applied Sciences, Berlin, Germany), Pornsak Sriamornsak (Silpakorn U.,

Nakhon Pathon, Thailand)

Surface Roughness Evaluation Of Experimental Dental Nanocomposite After Bleaching

Dasmawati MOHAMAD, Zuryati Ab Ghani, Ooi Qian Qian, Zaid Hameed,

Mohammed Ali (U. Sains Malaysia, Kelantan)

Beta Casein Nanovehicles For Targeted Oral Drug Delivery – Towards Treatment Of

Gastric Cancer Alina SHAPIRA, Irit Davidson, Noa Oron, Yehuda Assaraf,

Yoav D. Livney (Technion, Israel I.T.) Tues-Wed

Intravenous Fat Nanoemulsion: a Novel Antidote for Local Anesthetic-Induced Systemic

Toxicity in Humans Guy Weinberg, Israel RUBINSTEIN (U. Illinois-Chicago)

Selective Encapsulation of Dye Molecules in Dendrimer/Polymer Multilayer Microcapsules

by DNA Hybridization Chuan-Liang FENG, Qinglei Liu, Wang Zhang, Jiajun Gu,

Shenmin Zhu, Di Zhang (Shanghai Jiao Tong U., China)

Kenaf Composition Boards With Termite Resistance

Poo CHOW (U. Illinois, Urbana), F.S. Nakayama, T.A. Coffelt, S.H. Vinyard

(USDA-ARS, Maricopa, AZ)

Synthesis And Characterization Of Mesoporous CaO-B2O3-SIO2 Bioactive Glass

Lay-Gaik TEOH, Yu-Ren Wu, Pei-Hsing Huang, Yi Lin Huang

(Nat. Pingtung U. Sci. Tech., Neipu)

Synthesis, Characterization And In Vitro Bioactivity Of Sol-Gel Derived Mesoporous

Bioactive Glass Yu-Ren WU, Lay Gaik Teoh, Pei-Hsing Huang, Wei Haw Wu

(Nat. Pingtung U. Sci. Tech., Neipu)

Subtle Issues In Precision Analysis Involving Orthotropic Heat Transfer

Jay I. FRANKEL (U. Tennessee, Knoxville, TN)

Applications of Cd-Te Quantum Dot Nanoparticles in Bio - Medical Research

Somesree GHOSHMitra, Nathaniel Mills (Texas Woman’s U., Denton, TX),

Santaneel Ghosh, Jai N. Dahiya (Southeast Missouri St.U., Cape Girardeau).

Tong Cai, J.A. Roberts (U. North Texas, Denton)

Improvement In Functional Properties Of Potato Starch/Nano-Cellulose Fibre (NCF)

Nanocomposite Films Niranjan R. Savadekar, U.S. Annapure, S.T. MHASKE

(Inst. Chem Tech., Mumbai, Mumbai, India)

Mechanical Reliability of Bio-Composites from Bovine Teeth

Yehia M.S. El-SHAZLY (Alexandria U., Egypt), Mariana A. Moussa

(Bibliotheca Alexandrina, Egypt)

Preparation And Characterisation Of Hyrophilic/Hydrophobic Composite Scaffolds

Chengdong JI, Xia Zhong (U. Sydney, Australia), Sergei G. Kazarian (U. College,

London, UK), Andrew Ruys, Fariba Dehghani (U. Sydney) Mon-Wed

Preparation And Characterisation Of Conducting Biopolymer-Carbon Nanotube

Composite Materials Ali ALDALBAHI, Marc in het Panhuis (U. Wollongong,

Australia)

Are NHANES Reference Data Applicable to the Taller Canadian Children?

FILLER, Abeer Yasin (U. Western Ontario, Canada)

Bioactive Glass Scaffolds for Bone Tissue Engineering

Qiang FU (Lawrence Berkeley Nat La., Calif.), Eduardo Saiz (Imperial Coll., UK),

Antoni P. Tomsia (Lawrence Berkeley N.L.)

Multifunctional Cationic Superparamagnetic Nanoparticles For Gene Delivery And

Imaging Chao LIN (Tongji U., Shanghai, China), Qianqian Ma (Tongji Hospital),

Bo Lou (Tongji U.)

Nanocomposite Thin Layers Synthesized By Advanced Pulsed Laser Technologies For

Biomimetic Implant Coatings Ion N. MIHAILESCU (Ilfov, Romania)

Noise Corrected Imaging Plate Scanner – An Ideal Electron Detector For Transmission

Electron Microscopy Petra BELE (TU Munich, Germany)

In Vivo And In Vitro Toxicity Of Ag-Nps-Containinghydrogel In Reproductive Organs

And In Hela Cells Liming XU, Liang Chen, Xuefei Li, Zhe Dong (Nat. Inst Food Drug

Control, Beijing, China), Gang Wu (Inner Mongolia U. Sci Tech, Baotou, China),

Chunren Wang, Tingfei Xi (Beijing, China)

CHEMISTRY of COMPOSITES

Improvement Of R-Plane Oriented Cr2O3 Thin Films Surface Grown On Sapphire

Substrates Nobuyuki IWATA, Takuji Kuroda, Kento Norota, Yoshito Tuchiya,

Yuta Watabe, Kouichi Takase, Hiroshi Yamamoto (Nihon U., Chiba, Japan)

Growth Of AFeOX (A = Ca, Sr) By Pulsed Laser Deposition Method At High Pressure

Oxygen And Ozone Atmosphere Kento NOROTA, Yoshito Tsuchiya, Yuta Watabe,

Takuji Kuroda, Nobuyuki Iwata, Takuya Hashimoto, Hiroshi Yamamoto (Nihon U.,

Chiba, Japan)

Preparation of Organic-Inorganic Hybrid AR Coating by Sol-gel Process

Xinxiang Zhang, Xi Ke, Sida Zhang, Zhili He, Bo JIANG (Sichuan U., Chengdu, China)

Formation And Properties Of Poly(Vinyl Butyral)-Zirconia Hybrids

Koji NAKANE, Kosuke Mizutani, Ruonan Zhang, Nobuo Ogata (U. Fukui, Bunkyo,

Japan)

Mixed Ionic Conduction In Homogeneous And Layered Composite Electrolytes

F.M.B. MARQUES, T. Saradha, A.S. Fereira, S.G. Patrício, F.M.L. Figueiredo

(U. Aveiro, Portugal)

Reinforcement Of Starch-Based Biocomposite Film By Microcrystalline Cellulose From

Corn Husk Melissa B. AGUSTIN, Rohit C. Tilwani, Eriel May T. Bandong,

Joel R. Salazar (Central Luzon St.U., Nueva Ecija, Philippines), Weerachai Phutdhawong

(Kasertsart U., Nakhorn Pathom, Thailand)

Enlargement Of Grains Of Silica Colloidal Crystals By Centrifugation With An Inverted-

Triangle Shaped Container Kaori HASHIMOTO, Yoshihisa Suzuki, Atsushi Mori,

Shin-ichiro Yanagiya, Katsuhiro Tamura (U. Tokushima, Japan)

Observation Of Mobile Lattice Defects In A Colloidal Crystal

Makiko SAKABE, Yoshihisa Suzuki, Takahisa Fujiwara, Atsushi Mori,

Shin-ichiro Yanagiya, Katsuhiro Tamura (U. Tokushima, Japan)

Vortex-Induced Assembly Of Protein Nanofibrils: Towards New Scaffold Materials

Wojciech DZWOLAK (U. Warsaw, Poland)

Novel Application Of Insulin Amyloid Superstructures As Templates For Surface-

Enhanced Raman Scattering Slawomir WOJCIK, Wojciech Dzwolak

(U. Warsaw, Poland)

Perylene Diimide (PDI) Based Organic Photovoltaic Cells with Nano-Fabric Composite

Structure Yong MIN, June H. Park, Austin R. Carter, Lynetta M. Mier,

Sharlene M. Lewis, Raju P. Nandyala (Ohio St.U., Columbus)

Atom Counting And Atomic Structure For Monolayer-Protected Gold Clusters Via

Quantitative HAADF- STEM Zhiwei WANG (U. Birmingham, UK), O. Toikkanen

(Aalto U., Finland), F. Yin, Z.Y. Li (U. Birmingham), B.M. Quinn (Aalto U.),

R.E. Palmer (U. Birmingham)

Step Velocity On The {110} Faces Of Tetragonal Lysozyme Crystals Under High Pressure

Takahisa FUJIWARA, Yoshihisa Suzuki (U. Tokushima, Japan), Gen Sazaki

(Hokkaido U., Japan), Shin-ichiro Yanagiya, Katsuhiro Tamura (U. Tokushima)

Microfluidic Fabrication Of Colloidal Crystal Films And Spheres

Toshimitsu KANAI (Yokohama Nat. U., Japan)

Impact Of Chemical Functionalization Of Swcnts On PPY Nanocomposites: Multiscale

Molecular Modeling And Experimental Investigations Mariana IONITA,

Alina Pruna (U. Poli Bucharest, Romania)

Pd Nanoparticles Deposited On Poly(Lactic Acid) Grafted Carbon Nanotubes: Synthesis,

Characterization And Application in Heck C-C Coupling Reaction

Gururaj M. Neelgund, Aderemi OKI (Prairie View A&M U., TX)

Inorganic Polyoxide Thermoplastics

Alexander SHAULOV, A. Grachev, A. Lyubimov, G. Lyubimova, E. Stegno, A. Berlin

(Semenov Inst., Moscow, Russia)

Green Tea Mediated Biosynthesis Of alpha-Fe2O3 Nano˗/ Micro-Particles And Their

Characterization Bashir AHMMAD (Okayama U., Japan), Junichi Kurawaki

(Kagoshima U., Japan), Takahiro Ohkubo, Yasushige Kuroda (Okayama U.) Vertical Growth Of Metallic Boride Nanowires And Their Field Emission Properties

Robert M. Jacobberger, Joseph R. Brewer, Chin Li CHEUNG (U. Nebraska, Lincoln)

Polymer/Layered Double Hydroxide Nanocomposites

Kongli Xu (Inst.Chem, CAS, Beijing, China), Guangming CHEN (Graduate Univ. CAS,

Beijing, China)

Synthesis And Characterization Of Nanocatalysts For The Direct Electrooxidation Of

NaBH4 In A Solid Alkaline Membrane Fuel Cell Christophe COUTANCEAU,

M. Simoes, S. Baranton (U. Poitiers, France)

The Effect Of Boundary Layer On Activated Liquid Phase Sintering Of W-bronze

Composites by Co and Fe Additions Mohamad S Kahtan, R. Azmi (U. Malaysia

Perlis)

Quantum Chemical Modeling Of Spectral Properties And Electron Transfer In Extended

Systems Stanislav ZALIS, Hana Kvapilova (ASCR, Prague, Czech Rep.),

Irena Kratochvílova, Jakub Sebera (ASCR), Antonín Vlcek, Jr. (U. London, UK),

Rainer F. Winter (U. Regensburg, Germany)

New Approach To The Investigation Of The Phase Transitions In Long-Chain Molecular

Crystals With Different Types Of The End Groups Vyacheslav MARIKHIN,

Victor Egorov, Liubov Myasnikova (Ioffe, St. Petersburg, Russia)

Kinetics And Thermodynamics Of Model Colloidal Particle Deposition On Synthetic

Polymer Surfaces Lubomir LAPCIK, Jr., M. Frastík, P. Smolka, B. Lapcikova

(Tomas Bata U., Zlin, Czech Rep.)

High Molecular Weight Soft Segment based Polyethylene Shape Memory Polymers

M. AHMAD (U. Bolton, UK), B. Xu (Heriot-Watt U., Edinburgh, UK), H. Purnawali

(Nanyang T.U., Singapore), P.J. King, P. Chalker (U. Liverpool, UK), Y.Q. Fu

(Heriot-Watt U.), W.M. Huang (Nanyang T.U.), M. Miraftab, J.K. LUO

(U. Bolton, UK)

Oxidation Of MoSi2/SiOC/SiC Composite

Sung-June BONG, Min-Jung Kim, Sang-Hwan Bak, Dong-Bok Lee

(Sungkyunkwan U., Suwon, S. Korea)

Oxygen Permeation Study And Extraordinary Improvement Of Oxygen Flux Through

La0.6Sr0.4Ti0.3 Fe0.7 O3-δ -Coated Ba0.5 Sr0.5 Co0.8Fe0.2 O3-δ Perovskite

Tubular Membranes Jong Pyo KIM (Chungnam Nat. U., Daejeon, S.Korea),

Jung Hoon Park, Edoardo Magnone (Korea Inst Energy Res., Daejeon), Yongtaek Lee

(Chungnam Nat.U.)

Fabrication Of Vanadium/Y2O3-Stabilized ZrO2 Composite Membranes By A Two-Step

Sintering Process For Advanced H2 Production At Low Temperature

Sung Il Jeon, Jung Hoon Park, Edoardo Magnone, Soo Hyun Choi (Green House Gas

Research Center, Korea Inst. Energy Res., Daejeon)

Polymer-Containing Catalytic Nanocomposites

Esfir SULMAN, Valentina Matveeva, Mikhail Sulman (Tver T.U., Russia)

PP-Clay Nanocomposites: Degradation and Stabilisation

S. Al-MALAIKA, H.H. Sheena (Ashton U., Birmington, UK)

Pressure-Volume-Temperature Of Neat Polyvinyl Alcohol And Blending With Cassava

Starch Compound Chong-Yu LOW, Tin-Sin Lee (UTAR, Kuala Lumpur, Malaysia)

Effect Of Particle Size And Concentration Of Mica On Properties Of Polytrimethylene

Terepthalate Vivek. R. GAVAL, R.S.N. Sahai, S.P. Deshmukh, P.A. Mahanwar

(Inst. Chem. Tech., Mumbai, India)

Effect of Cr on the Oxidation Resistance Of Nb-Cr-Mo-Si-B Alloys

S.K. VARMA, Benedict Portillo (U. Texas El Paso)

The Effects of Functionalized Graphene Sheet on The Properties of Poly

(ethyl methacrylate) Su-Jin HAN, Seong Min Oh, Hyung-il Lee, Han-Mo Jeong

(U. Ulsan, S. Korea)

Fire Retardation Effect Of Graphite Oxides On Epoxy Resin

Kyung Min OH, Yu Rok Lee, Soon Cheol Kim, Hyung-il Lee, Han-Mo Jeong

(U. Ulsan, S. Korea)

Hierarchical Porous Materials Templating from Nanoparticle-Stabilized Emulsions

To NGAI, Zifu Li (Chinese U. Hong Kong)

GENERAL APPLICATIONS and Processing of materials

Effect of Refining Pretreatment on Preparation Of Cellulose Nanofibrils By Mechanical

Process A.K. BHARIMALLA, V.S. Karande, S.T. Mhaske, N. Vigneshwaran

(Mumbai, India)

Application Of Atmospheric Pressure Plasma Treatment To Improve Hydrophilc Property

Of Aluminum Foil JaeHa LEE, JaeYoung Jang, Kyong Yop Rhee (Kyung Hee U.,

Yongin, S. Korea), HyunWook Kim (Dongwon Tech Co. Kimhae, S. Korea)

Atmospheric Pressure Plasma Treatment Of Polypropylene As Door Panel Part Material

JaeYoung JANG, JaeHa Lee, KyongYop Rhee (Kyung Hee U., Yongin, S. Korea),

Hyun Wook Kim (Dongwon Tech Co., Gimhae, S. Korea)

Improvement Of Hydrophilic Property Of Magnesium Alloy Panel Through Oxygen

Plasma Modification Kyong Yop RHEE, Jae Young Jang (Kyung Hee U., Yongin,

S. Korea)

Non-covalently Functionalized Carbon Nanotubes as Catalyst Supports for Fuel Cell

Applications Shuangyin WANG, Xin Wang (Nanyang T.U., Singapore)

Design And Simulation Of The Ultrasonic Spot Metal Welding Horn Used To Improve

Welding Performance Ziad Al-SARRAF (U. Glasgow, UK)

Micro/Nanoengineered Thermal Ground Plane

Tao DENG, Shakti Chauhan, Chris Eastman, Peter De Bock, Pramod Chamarthy,

Stan Weaver (GE Global Res.Cen., Niskayuna, NY)

Nanomaterials for Tunable Passive Microwave Devices

Yuliang ZHENG, A. Gaebler, M. Koeberle, R. Jakoby (T.U. Darmstadt, Germany)

TiO2 Nanotubes- Applications in Nanotemplates and Photovoltaics

Dongdong LI, Dongfang Liu, Xiaohong Fang, Linfeng Lu, Changzhou Wang,

Xiaoyuan Chen (Shanghai Adv. Res. Inst., China)

Preparation Of Short Carbon Fiber/Sic Multilayer Composites By Tape Casting

Wenshu YANG, Claudio Badini (Politec Torino, Italy), Laura Fuso (Dronero, Italy),

Sara Biamino, Claudia Vegabolivar Bolivar, Paolo Fino (Politec Torino, Italy)

Non-Destructive Evaluation Of Carbon-Carbon Composites Using Infrared Thermography

Tsuchin Philip Chu, Jarlen Don, Yicheng Pan, Anish Poudel (Southern Illinois U.,

Carbondale)

Mixing Solid Particles in Fluidized Beds

Haihong FAN, Delong Xu, Yong Min, Hui Li, Yanxin Chen, Jinhe Fan (Xi’an U.

Architecture & Tech., China)

Self-Assembled Nanometric Spacer on Surface of Natural Rubber Composited with TiO2

Kritsada Phatcharasit, Wirach TAWEEPREDA (Prince of Songkla U.,Hat-Yai, Thailand)

Functionalized Carbon Nanotubes And Anode Degradation In High Temperature PEM

Fuel Cells A. Orfanidi, M.K. Daletou, S.G. NEOPHYTIDES (Hellas Inst., Patras,

Greece)

Fabrication Of A Three Dimensional Superhydrophobic Surface Structure And

Characteristics Of Flow Past It Dongseob KIM, Woonbong Hwang*

(POSTECH, Pohang, S. Korea)

Using Quality Tools to Reduce Surface Depression Defect on Composite Panels

M. Iqbal HUSSAIN, Zuraidah Mohd Zain, Khairul Bakhtiar b Baharim

(U. Malaysia Perlis)

Development Of Nanocomposite Mold Insert For Microfabrication Of Polymeric

Microfluidic Devices R.K. Jena, CheeYoon YUE, Y.C. Lam (Nanyang T.U.,

Singapore)

Transparent Superhydrophobic Surface With Self-Cleaning Effect

Changwoo LEE, Kyungjun Lee, Sungnam Lyu, Sangmin Lee (Pohang U.Sci.Tech.,

S. Korea),Youn Sang Kim, Woonbong Hwang (Seoul N.U., S. Korea)

A Case Study On BIM Based Building Energy Evaulation

Sang-Tae NO (ChungJu Nat. U., S. Korea)

Optical And Microwave Communication Using New Materials – An Overview

Otto STROBEL, Elke Dietrich (Esslingen U. App Sci, Germany), Jan Lubkoll

(Erlangen Friedrich-Alexander U., Germany)

Fiber-Optic Communication For Vehicles, Airplanes And Vessels

Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel

(Esslingen U. App. Sci., Germany)

Multifunctional Hybrid Structures for Energy and Environmental Applications

Hema Vijwani, Adam Maleszewski, & Sharmila M. MUKHOPADHYAY

(Wright St.U., Dayton, OH) Mon-Wed

Development Of A Correlation Speed Measurement For Automotive Applications

Christian BETZ (Esslingen U. App. Sci., Germany), Vladimir V. Rastorguev

(Moscow Aviation Inst., Russia), Otto Strobel (Esslingen U.App.Sci.)

Smart Materials Tectonics: Development Of Solid Electrolyte Dendrites With Micro

Lattice Structures To Realize Fuel Cell Miniaturizations Soshu KIRIHARA,

Katsuya Noritake, Satoko Tasaki and Hiroya Abe (Osaka U., Japan)

Luminescence Light Waveguide And Lasing Properties In Some Doped II-

Visemiconductor Nanowire Bingsuo ZOU, Guozhang Dai, Ruibin Liu (Beijing

Inst.Tech., China)

Enhancing Modern Mobile Communication Systems Using Tunable Components Made Of

Material Utilized In New Fields Of Application Kira KASTELL (U. App. Sciences,

Frankfurt, Germany)

Monolayer Molecular Doping For Cost-Effective Photovoltaics

Fei XIU (City U. Hong Kong, China), Miao Yu (Hong Kong UST), Johnny C. Ho

(City U. Hong Kong), Zhiyong Fan (HKUST)

Design Of Clamping Apparatuses And Fatigue Testing Procedures Of A Vertical-Axis

Composite Wind Power System Feng-Min Lai, Chao-Chieh YANG (U. Da-yeh,

Changhua), Jing-Wun Liou (Nat. Chiao-Tung U., Hsinchu), Chen-Mao Yang,

Chun-Hsiang Lan (U. Da-yeh) Friday

Design Of Clamping Apparatuses And Testing Procedures Of A Vertical-Axis Composite

Wind Power System Feng-Min LAI, Chao-Chieh Yang, Chen-Mao Yang,

Chun-Hsiang Lan (Da-yeh U., Changhua) Friday

Synthesis and Characterization of Cathode Material for Li-ion Batteries

Umair NISAR, Q.J. Khattak (GIK Inst., Topi, Pakistan), Mohsin Saleem, R.A. Shakoor

(KAIST, DAejeon, S. Korea), Ali Hussiana, F.A.Khalid (GIK)

Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential Application for Micro

Surface Mounted Components Awad Kh. Al-ASMARI (AlKharj U., Saudi Arabia)

Experimental Study On Polyester Based Concretes Filled With Glass Fibre Reinforced

Plastic Recyclates -A Contribution To Composite Materials Sustainability

M.C.S. RIBEIRO, A. Fiuza, M.L. Dinis (U. Porto, Portugal), A.C.M. Castro,

F.G. Silva, J.P. Meixedo, M.R. Alvim (Polytech. Porto, Portugal)

Tribological Properties of Quantum Dot/PMMA Nanocomposite Films

Min ZOU, Alex Arguelles (U. Arkansas, Fayetteville), Y. Andrew Wang (

Ocean NanoTech, Springdale, AR)

Nano-Electrocatalysts Based On Carbon Nitride Supports For The Orr And For In Pem

Fuel Cells Vito DiNOTO, Enrico Negro (U. Padova, Italy)

Experimental Investigation of the Performance of Fiber Reinforced EPDM for Automotive

Radiator Hoses Mehdi GHATUS (Lawrence T.U., Southfield, MI), Chris Kargula

(Auburn Hills, MI), Chris Riedel (Lawrence T.U.)

Studies On Polymer-ZnO Nanowires Composites For Gas Sensing Application

Shiv Kumar GUPTA, Niranjan Ramgir, Manmeet Kaur, Niyanta Datta,

Vibha Saxena, Aditee Joshi, Ajay Singh, Dinesh Kumar Aswal

(Mumbai, India)

Relations Between Phase Diagram, Kinetics Of Thermal Annealing Process, And

Morphological Stability In Polymer:Fullerene Blends For Bulk Heterojunction

Solar Cells Guy VanASSCHE, F. Demir, B. Van Mele (Vrije U. Brussel, Belgium),

J. Manca, D. Vanderzande (Hasselt U., Diepenbeek, Belgium)

Optimization Of Cellulose Fiber Isolation From Rice Straw And Its Application For

Thermoplastic Composite Formation Siritorn NARKCHAMNAN,

Chularat Krongtaew (Mahidol U., Thailand)

In-Situ Fabrication And Thermoeletric Properties Of Bismuth-Polyaniline Nanocomposites

Yuanyuan WANG, Xi Yao, Kefeng Cai (Tongji U., Shanghai, China)

Rheological Behavior Of Epoxy-Amine Systems Modified By Sepiolite

Clara M. GOMEZ (U. Valencia, Spain), Andres Nohales (Castellon, Spain),

Paula Felix (U. Valencia)

The Complex Permittivity And Permeability Of PMMA/Fe3O4 NPS/Ag NPS Composites In

The Microwave Range WenHsien Sun (Ind.Tech Res. Inst.Hsinchu),

DungShing HUNG (Ming Chuang U., Taipei), Tsing Tang Song (ITRI, Hsinchu),

Shang Fan Lee (Academia Sinica, Taipei)

Design & Development Of ‘Programmable Transceiver Controller (A Nanotechnology

Device)’ For Wimax/Wifi Wireless Communication. S. Devendra K. VERMA,

P. K. Barhai (Birla I.T., India)

Optical Absorption Of Three-Dimensional Nanoporous Structures

SiuFung LEUNG, Qingfeng Lin, Miao Yu (Hong Kong U.S.T.,China), Kyungmok Kwon

(KAIST, S. Korea), Yunze Long (HKUST), Kyoungsik Yu (KAIST), Zhiyong Fan

(HKUST)

Advanced Dispersion Strategies And Property Design For CNT/Rubber Nanocomposites

Heike ZIMMERMANN, Robert H. Schuster (Hannover, Germany)

Mechanical Properties Study of Advanced Pultrusion Epoxy Composites

Leiming DENG, Junwei Qi, Jun Xiao, Chong Dou (NUAA, Nanjing, China)

Polyethylene: The Next Frontier For Self Reinforced Polymer Composites

Lucas MORGAN, B. Weager (NetComposites, Chesterfield, UK), J. Clarke, N. Thomas

(Loughborough U., UK)

Applications Of Nanotechnology In High Voltage Power Equipment - Nanodielectrics

George CHEN (U. Southampton, UK) INVITED 25 min

Computation And Stereographic Visualization Of Temperature And Heat Flux In A

Thermal Barrier Coating Of A Turbine Blade Stephen Akwaboa, S. Kodiyalam,

Amitava JANA, P. Mensah, R. Diwan (Southern U. Baton Rouge, LA)

Processing Of Carbon-Carbon Composites For Aircraft Brake Applications

Jarlen DON, Tsuchin Philip Chu (Southern Illinois U., Carbondale)

Nanotechnology: Trends for Oil well Production

Oscar CORONA, A. Balza, J. Brito, A. Colina (Los Teques, Venezuela)

Preparation and Characterization of Pb-free (Na, K)NbO3-Based Ceramics For

Eco-Friendly Piezoelectric Device Jeong Seon HAN, Hee Chul Lee (Korea Polytech

U., Kyunggi)

Review Of Automated Tape Laying Trajectory Planning

Junfei LI, Xianfeng Wang, Jun Xiao (NUAA, Nanjing, China)

Enhancement Of Wear And Impact Property Of Poly(Butylene Terephthalate) By E-Beam

Process Joon-Pyo JEUN, Keum-Jin Ko, Bum-Sik Shin, Hyun-Bin Kim,

Young-Chang Nho, Phil-Hyun Kang (KAERI, S. Korea)

Hot-Press Fast-Bonded Technology For Prepreg Wiinding

Biao YAN, Jun Xiao, Liwei Wen (NUAA, Nanjing, China)

Understandings of Solid Particle Bonding Behaviors in Warm Spray Deposition

Makoto WATANABE, KeeHyun Kim, Seiji Kuroda (NIMS, Tsukuba, Japan)

SEM Visualization Of CNTS In CNT/Epoxy Composites At Low Accelerating Voltage

Wenjing LI, Wolfgang Bauhofer (Hamburg U.T., Germany)

Influence Of Z-Pin’s Curing Degree On Properties Of Laminates And Its Mechanism

Wei SHANG, J. Xiao , P.Z. Cheng, L.M. Deng. Q.Y. Chu (NUAA, Nanjing, China)

Fiber-Metal Hybrid Laminates As Structural Material In Towers For Offshore Wind

Energy Converters J.C. Suarez (U. Poli Madrid, Spain), X. MENG (Ocean U. of

China, Qingdao), S. Guzman, M.A. Herreros, I. Diez (U. Poli Madrid)

Synergistic Effect Of Phosphorus-Containing Nanosponge On The Intumescent Flame

Retardant Polypropylene Xuejun Lai, Xingrong ZENG, Hongqiang Li, Changyu Yin,

Haili Zhang, Kecheng Gong (South China U.T., Guangzhou)

Nanodiamonds From Pulsed Plasma Generated In Water

Imil A. AKKOZIEV, S.K. Sulaymankulova, A.S. Mametova, J.K. Zhasnakunov

(KRSU, Kyrgyzstan)

Self-Organization Of Nanoparticles Of Copper, Silver And Gold In Pulsed Plasma In

Liquid S.K. Sulaimankulova, Imil A. Akkoziev, A.S. Mametova,

Bektur K. AKKAZIEV (KRSU, Kyrgyzstan)

Fabrication Of Calcium-Phosphate Cements From Hydroxyapatite Powders Surface-

Modified With Various Concentrations Of Sodium Inositol Hexaphosphate And

Their Material Properties Toshiisa KONISHI, Minori Mizumoto, Michiyo Honda

(Kanagawa Acad Sci Tech., Japan), Zhi Zhuang, Mamoru Aizawa (Meiji U., Japan)

Quasi-One-Dimensional Transport And Thermoelectricity: Peierls Distortion In Indium

Selenides Jong-Soo RHYEE (Kyung Hee U., S. Korea)

An Investigation On The Tribological Properties Of Over Deformed Al/SiCP Composites

M. Baki KARAMIS, F. Nazlı Sarı, Veysel Erturun (Erciyes U., Turkey)

Explosive Welding Of Magnesium Alloy With Aluminum And Stainless Steel

P. MANIKANDAN, Joonoh Lee, Akihisa Mori, Kazuyuki Hokamoto

(Kumamoto U., Japan)

Application of Box-Behnken in Turning of Inconel 718 using PVD Carbide Tools under

Minimum Quantity Lubrication Gusri Akhyar IBRAHIM, Che Hassan Che Haron,

Jaharah Abdul Ghani, Ahmad Yasir Moh. Said, Moh. Zaid, Abu Yazid

(U. Kebangsaan Malaysia, Kuala Lumpur)

A Study On Curing Processes And Environmental Effects For Rapid Composite Repair

Faruk ELALDI (U. Baskent, Turkey), Pelin Elaldi (Bilkent U., Turkey)

Synthesis Of Superparamagnetic, Photocatalytic Nanocomposites For Water Purification

Darko MAKOVEC (Jozef Stefan Inst., Ljubljana, Slovenia), Marjan Sajko (Maribor,

Slovenia), Aljaz Selisnik (Celje, Slovenia) c, Miha Drofenik (U. Maribor)

Research on Automatic Tape Laying of Elliptical Cylinder

Liwei Wen, Xianfeng Wang, Junwei Qi, Xiaoping Li, Yi Wang (NUAA, Nanjing,

China), Yurong Chen (Nanjing Medical Secondary Sch., China)

Research On The Deformation Of Prepreg Tape Influenced By The Temperature

Xianfeng WANG, Liwei Wen, Junwei Qi, Xiaoping Li, Yi Wang (NUAA, Nanjing,

China), Yurong Chen (Nanjing Medical Secondary Sch., China)

Mechanical and Tribological Properties of Epoxy-CNT Nanocomposite Coatings

Huirong. LE (U. Plymouth, UK), A. Howson, M. Ramanauskas (U. Dundee, UK) chair

Thermomechanical And Precipitation Hardening Of Stir-Cast Silica Reinforced

Aluminium Alloy Matrix Composites S.S. SHARMA, K. Jagannath, N.S. Mohan,

Chandrashekhar Bhat, P.R. Prabhu, R.C. Chadaga (Manipal Inst. Tech., India)

Prediction of Sound Attenuation Characteristics of Muffler

Chandrashekhar BHAT, S.S. Sharma, K. Jagannath, N.S. Mohan (Manipal Inst.Tech.,

India), S.G. Sathisha (QUEST, Bemgaluru, India) chair

Performance Comparison Of Carbide And HSS Drills In Drilling Of GFRP Composite

Materials- An Experimental Study Using Design Of Experiments B.R.N. MURTHY, Lewlyn L. R. Rodrigues, D. Anjaiah (MIT, Manipal, India)

Carbon Nanotube Fiber For Photovoltaic Application

Tao CHEN, Zhibin Yang, Huisheng Peng (Fudan U., Shanghai, China)

Improvements To The Design Of A Particle Beam Cluster Source For Nanofabrication

Stuart Thornton, Chris Binns, Shian GAO (U. Leicester, UK)

Resin Flowing Analysis In Sandwich Laminates Under VARTM Process

Cheng-Hsien CHUNG (United Ship Design Dev Cen, Taipei), Yu-Ti Jhan , Ya-Jung Lee,

Yu-Chieh Wang (Nat. Taiwan U., Taipei)

High Thermal Conductivity Diamond Composites

F.M. SHAKHOV (Ioffe, St. Petersburg, Russia), A.M. Abyzov (St. Petersburg Inst.Tech.,

Russia), S.V. Kidalov (Ioffe, St. Petersburg)

Testing Of 2m Offset Thin-Shell Reflector Demonstator

Omer SOYKASAP, Sukru Karakaya (Afyon Kocatepe U., Turkey)

Application Of The Scourer Or Luffacylindrica Under Natural, Rigid And Flexible Resin

To Obtain A Natural Composite Material Daniela RINCON P,

Carlos A. Guerrero F, Fabio E. Sierra, Eliana Guerrero-Romero (U. Colombia)

Synthesis, Structure, and Reactivity of Dealloyed Bimetallic PtM3 Fuel Cell Cathode

Electrocatalysts Mehtap Oezaslan, Stefan Rudi (TU Berlin, Germany), Zengcai Liu

(Oak Ridge N.L., TN), Peter Strasser (TU Berlin, Germany, Oak Ridge N.L., TN)

Tues-Friday

Evaluation Of Thermal Sprayed Polymers For Tribological Applications

Carlos R. C. LIMA, Lucas P. Siqueira (UNNIMEP, Brazil), Flávio Camargo

(Santo Antonio de Posse, Brazil)

Investigation Of Powder Metallurgy Application For Uncooled Turbines

Herny EMILIE (Toulouse, France), Xinhu Wu (U. Birmingham, UK),

Jean-Francois Rideau (Toulouse, France)

Hereditary Type Model For Mechanical Behavior Of Viscous Polymers

Sofia ALEXEEVA, Alexander Mosin (Moscow, Russia) chair

Mechanical Properties Of Self Reinforced Poly(Lactic Acid) Prepared By Compression

Moulding Izan Roshawaty MUSTAPA, Robert A. Shanks, Ing Kong

(RMIT, Melbourne, Australia)

Improved Mechanical Properties Of Aluminium/Epoxy Composites Through Silane

Functionalization Of Aluminium Powder Jorge Ivan CIFUENTES, Jason Marroquin

(Kyung Hee U., Yongin, S. Korea)

Grown Ambient Effect In Gan Crystalline Quality On Si(111) By MOVPE

Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)

Microstructure Analyses On The Effect Of Incorporating Cigarette Butts In Fired Clay

Bricks Aeslina Abdul KADIR (UTHM, Johor, Malasia), Abbas Mohajerani (RMIT,

Melbourne, Australis)

Highly Efficient Ultraviolet Light Emission From Silicon Nanocrystals

Naoto SHIRAHATA (NIMS, Tsukuba, Japan) Mon-Wed

Manufacturing Biocomposite Parts Using LRTM

Jayaraman RAGHAVAN, B. O’Connor (U. Manitoba, Canada), G. Kime (Delaware,

Canada), B. Klimack, J.A. Milne (Carlson, Canada), P. Zanetel (New Flyer Ind.,

Winnipeg, Canada) Mon-Tues

Chemistry Of Some Oxide Based Nanomaterials For Energy Conversion Applications

A.K. TYAGI (Mumbai, India) INVITED 25 min

SOM Based Segmentation Method to Identify Water Region in LANDSAT Images

Win KONG, V.J. Tiagrajah (U. Tenaga Nasional, Selangor, Malaysia)

Monitoring Composite Blade of Vertical Axis Wind Turbine using Self Organizing Map

Ming Li, Ayo ABATAN (Miami U., Oxford, Ohio)

Behaviour of Core Shell Nanoparticle Catalysts in the PEMFC Environment

Sarah BALL (Johnson Matthey Tech., Sonning Common, UK)

Increasing The Octane Number Of Gasoline Using Praseodymium(Iii)-Ethylene Diamine

Tetra Acetate/Activated Clinoptilolite Zeolite Dewi TRISTANTINI, Eny Kusrini,

Vino Hasyim (U. Indonesia, Depok)

Silicon-Conjugated Polymers Nanocomposites Fabricated By A Two-Step Electrochemical

Approach Farid A. HARRAZ, Aliaa M. Salem (CMRDI, Cairo, Egypt)

Characterization Of Carbon Fibres Reclaimed From Steam-Thermal Recycling Process

Shengyin YE, Arezki Bounaceur, Yannick Soudais, Radu Barna (Ecole des Mines

d’Albi, France)

Important Design Elements of Large Flexible Ferris Wheels

Yongfeng LUO, Jie Bai, Xiaonong Guo (Tongji U., Shanghai, China)

Wet Electrospun CuNP/Carbon Ultra Fine Coils for Super Air Core Inductors

Awad Kh. Al-ASMARI (King Saud U., Saudi Arabia), Ashraf A. Ali (Al-Khari U.,

Saudi Arabia)

Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential Application for

Micro Surface Mounted Components Ashraf A. ALI (Al-Kharj U., S. Arabia),

Awad Kh. Al-Asmari (King Saud U., Saudi Arabia)

Nano Loop Optical Antenna

Hengjiang Ren, Zhongxiang SHEN (Nangyang T.U., Singapore)

Composite Repair Using VARTM Techniques

Ronald Sterkenburg, PengHao WANG (Purdue U., West Lafayette, IN) Effect of Particle Size And Concentration Of Fly Ash On Properties Of Polyester Thermoplastic

Elastomer Composites R.S.N. SAHAI, V.R. Gaval, P.A. Mahanwar (Inst. Chem Tech.,

Mumbai, India)

Improved Interfacial Strength of SMA Composite With Nanotreated Fibre Surface

Yulong WANG (Hong Kong Poly U., China), Zhenqing Wang (Harbin I.T., China),

Limin Zhou (Hong Kong Poly U., China)

Study of the Efficiency of UV and Visible-Light Photocatalytic Oxidation of Methanol on

Mesoporous RuO2-TiO2 Nanocomposites Adel A. ISMAIL (CMRDI, Cairo, Egypt),

Detlef W. Bahnemann (U. Hannover, Germany) Micro-Nano Mineral Study And New Mineral Discovery

Jinfu SHU (Carnegie Inst. Of Washington, DC), Jingsui Yang, He Rong (Inst of Geology,

Beijing), Ho-kwang Mao (Carnegie Inst.)

Design Of A Polyamide Composite For High Speed Sliding Conditions

A.M. ELEICHE (King Fahd U. Pet Min, Dhahran, S. Arabia), M.O.A. Mokhtar

(Cairo U., Egypt), E.S. Nasr, G.M.A. Kamel (Tech Res Cen, Cairo)

Characterization Of The Durability Of Surface Treatments Used In Adhesive Bonding

Susan PITT, Daren Peng, Rhys Jones (Monash U., Australia)

Development of Composite Structural Parts for a Vertical-axis Wind Turbine

Tai-Yan KAM, H.M. Su, R.R. Chang, F.M. Lai, J.H. Wu (Nat. Chiao Tung U., Hsinchu)

Controlled Synthesis of Sb Nanostructures and Their Conversion to CoSb3 Nanoparticle

Chains for Li-Ion Battery Electrodes Jixin Zhu, Qingyu YAN (Nanyang T.U.,

Singapore)

Development Of A Model For Online Monitoring Of Friction Stir Welding Using Acoustic

Emission Technique C.N. SURESHA, B.M. Rajaprakash B M, Upadhya Sarala

(U. Bangalore, India)

Hydrogen Storage In Metal-Decorated Nanostructureed Materials

Jisoon IHM, Keunsu Choi, Jaehyun Bae, Changwon Park (Seoul Nat U., S. Korea)

Mon-Tues before 3PM

Optimal Design of Molded Bark Particleboard Used in Heated Flooring System by using

Finite Element Analysis Ping YANG (Kumamoto U., Japan), Hidefumi Yamauchi

(Akita Pref. U., Japan), Hikaru Sasaki (Helix Ltd, Akita, Japan)

Laser Repair Hardfacing Of Titanium Alloy Turbine Blades

Andrzej A. KlimpeL, Marek BURDA (Silesian U.T., Gliwice, Poland)

Energy Harvester Device For Charging Applications

A.R. AKANDE, A. Nechibvute, P.V.C Luhanga (U. Botswana)

Mechanical Properties Of Injection Moulded Polylactic Acid – Kenaf Fibre Biocomposites

Hazleen ANUAR, A. Zuraida (IIUM, Kuala Lumpur, Malaysia)

Special Technology For Industrial Production Of Sandwiches From Metals

Mark R. LIBERZON (Moscow St. Aviation T.U., Russia)

Preparation Of Dielectric Embedded Silicon Nanocrystallites For Flash Memory

Applications H. WONG, O.Y. Wong, J. Liu (City U., Hong Kong, China)

Glass Fiber Reinforced Vinyl Ester Containing Nano-Al2O3 Composites for Pultrusion:

Process Feasibility and Kinetic Analysis Chin-Hsing CHEN (Chinese Culture U.,

Taipei), Yun-Yun Sun (Tung Fang Design U., AOHSIUNG), Yih-Chern Juang

(Chinese Culture U.)

Towards The Quantum Limits In Scaling Of Electronic Devices

Waldemar NAWROCKI (Poznan U.T., Poland)

Development Of Fracture Fixation Plates Prototype Through Metal Injection Moulding

(Mim) Process Mohd A. OMAR, I. Subuki, N. Abdullah, M.F. Ismail, A.H. Hashim

(SIRIM, Kedah, Malaysia), A.H. Zulkifly (U. Malyasia Kuantan, Pahang)

Nanostructured Composites: Potential Materials For Organic Light Emitting Diodes And

Organic Solar Cells NGUYEN Nang Dinh, Dinh Van Chau, Do Ngoc Chung,

Nguyen Phuong Hoai Nam (Vietnam Nat. U. Hanoi), Tran Quang Trung (Vietnam Nat.

U., HCM city)

Quasi-Static Experimental Study on the Constitutive Behavior of Automotive Windshield

Interlayer Bohan LIU, Mengyi Zhu, Yueting Sun, Jun Xu, Dongyun Ge, Yibing Li

(Tsinghua U., Beijing, China) npPOSTER

Evolution Of Structural Phase States Of Plasma-Hardened Rolls Surface Under Service

Victor GROMOV, Sergey Konovalov, Oleg Efimov, Anna Atroshkina

(Siberian St.U. Industry, Russia) ns Poster

High Energy Density Li-Air Batteries Using Carbon Nanocomposite Air Electrodes

Jianping ZHENG, G.Q. Zhang (Florida A&M U., FSU, Tallahassee) POSTER

INFRASTRUCTURE COMPOSITES

Discussion of Some Issues For Building Integrated Photovoltaics (BIPV) in Architectural

Design In China Changhai PENG, Ying Huang , Zhishen Wu (Southeast U., Nanjing,

China)

Strength Capacity Of One-Way Continuous Reinforced Concrete Slabs

Domagoj Matesan, Jure Radnic, Nikola GRGIC, Vatroslav Camber (U. Split, Croatia)

Effect Of Finger Joint Size And Orientation On The Tension Strength Of Eucalyptus

Regnans/Delegatensis Con Y. ADAM, B M Ahmed (Monash U., Melbourne,

Australia)

Strengthening of Reinforced Concrete Beams using Carbon Fiber Sheets bonded with

Cement-Based Mortars. Abdullah Hilal Al-SAIDY (Sultan Qaboos U., Oman)

Bond Characteristic Of FRP Embedded In Concrete For Retrofit Of Reinforced Concrete

Structure Soo-Yeon SEO (Chungju Nat.U., S. Korea), Luciano Feo (U. Salerno,

Italy), David Hui (U. New Orleans)

An Experimental Investigation on Internal Hydrophobation of Cement Based Materials

Mohammad H. BAGHBAN, Per Jostein Hovde, Stefan Jacobsen (Norwegian U.

Sci. Tech., Trondheim),

Environment-Assisted Subcritical Debonding Of Epoxy-Concrete Interface

Jialai WANG, Chao Zhang, Ken Fridley (U. Alabama, Tuscaloosa)

Estimation Of Nominal Moment Of Reinforced Concrete Members Strengthened With

FRP Baik-Soon CHO, Young-Soo Chung, Yeon-Wook Kim, Eunsoo Choi,

Sangsoo Jeon (Inje U., Gyeongnam, S. Korea)

Development of High-Performance Fiber-Reinforced Cementless Composite Mortar

Hyun-Jin LIM, Chang-Geun Cho (Chosun U., Gwangju, S. Korea)

Seismic Strengthening of Reinforced Concrete Columns by Applying Steel

Fiber-Reinforced Cementitious (SFRC) Mortar Sung-Jin HAN, Chang-Geun Cho,

Eui-Sik Kim (Chosun U., Gwangju, S. Korea)

Seismic Performance Improvement of RC Columns by Applying High-Performance Fiber

Cementitious Mortar Chang-Hwan PARK, Chang-Geun Cho, Jeong-Sup Kim

(Chosun U., Gwangju, S. Korea), Luciano Feo (U. Salerno, Italy), David Hui

(U. New Orleans)

Influence Of Concrete Skin On De-Icing Salts Resistance

Pavel REITERMAN, Karel Kolar, Michaela Kostelecka, Ondrej Holcapek

(Czech T.U., Prague)

High Strength Natural Fibre Composites for Construction

Mizi FAN (Brunel U., UK)

Induced Size Effects Of Gd3+ Ions Doped NiZn Ferrite Nanoparticles

Balwinder KAUR (Jammu, India), Manju Arora, A.K. Srivastava, R.P. Pant

(New Delhi, India)

Experimental Study for Performance Evaluation of Large Double Head Studs in High

Strength Concrete HakBo SHIM, Sung Hun Jang, JooHo Lee, HyoSeon Park

(Lotte Res.Dev. Inst., S. Korea)

Air Permeability Test Of Concrete Tube Structures With Joints

Joonam PARK, Lee-Hyeon Kim, Seong-Won Nam (Korea Railroad Res.Inst., Kyunggi)

Fire Resistance Properties of Hybrid Fibers Reinforced High Strength Concrete

JeongSup KIM, CheolHee Cho, MyungHwan Yoo, JaeHwan Kim, ChangGeun Cho,

YoungSuk Shin (Chosun U., Gwangju, S. Korea)

Bayesian Belief Network Model for the Deterioration of a Suspension Bridge

Taejun CHO (Daejin U., Pocheon, S. Korea)

A Study For The Changes Of The Micro Structure By Deterioration Factors For NPP

Concrete Structures KiBeom KIM, Do Gyeum Kim, Ho Jae Lee, Jang Hwa Lee,

(Korea Inst Construct. Tech., Gyeonggi)

Analytical Evaluation For Shear Strength Of Beam-Column Connections Strengthened

With CFRP Composites Kien Le-Trung, Kihak LEE (Sejong U., Seoul, S. Korea),

Do Hyung Lee (Paichai U., Daejeon, S. Korea), Luciano Feo (U. Salerno, Italy),

David Hui (U. New Orleans)

Reinforcement of Plain Concrete Piers of Railroad Bridges using Composite of FRP-Steel

Plates Eunsoo CHOI, Young-Soo Chung, Joonam Park, Baik-Soon Cho (Hongik U.,

Seoul, S. Korea)

Behaviour Of FRP-Confined Concrete-Filled Steel Tubular Columns Subjected To

Combined Axial And Cyclic Lateral Loads Tao YU, Y.M. Hu, J.G. Teng

(Hong Kong Poly U., SAR, China)

Experimental Observation Of Rc Columns Strengthened With Stainless Steel Wire

Do Hyung LEE (PaiChai U., Daejeon, S. Korea), Byeong Hwa Kim (Kyungnam U.,

Kyungnam, S. Korea), Sung Hoon Kim (Seoul N.U., S. Korea), Jun-Hyeok Choi

(Seoul, S. Korea)

An Experimental Study For Carbonation Effect On The Concrete Using MIP and SEM

Ho Jae LEE, Do Gyeum Kim, Ki Beom Kim (Korea Inst Const.Tech., Gyeonggi),

Hyung Ju Kim (Seoul, Korea)

A Study On Microstructure Change By Carbonation In NPP Concrete

Do Gyeum KIM, Ho Jae Lee (Korea Inst Const.Tech., Gyeonggi), Hyung Ju Kim

(Seoul, Korea)

Lateral And Restrained Distortional Buckling Of Doubly-Symmetric Steel I-Beams

Alper Buyükkaragoz, Ilker KALKAN (Kirikkale U., Turkey)

Use of Waste polyethylene as a Concrete Additive: Surface Modification of PE by Grafting

PAM Po-Yu Ko (Nat. Chiayi U., Chiayi), Chun-Ku Lu (Nat. Cheng Kung U., Tainan),

Maw-Tien LEE (Nat. Chiayi U.)

The Characteristics of the Cement Mortar with Acetone-treated Rubber Crumbs

Chun-Ku Lu (Nat. Cheng Kung U., Tainan), Liang-Hsing CHOU, Ying-Yu Shiu

(Nat. Chia-yi U., Minxiong)

Multi-Phase Modeling Of Ionic Transport In Concrete When Subjected To An Externally

Applied Electric Field Qingfeng LIU, Long-yuan Li, Jian Yang (U. Birmingham,

UK)

Longitudinal Wave Velocity Of Bonded PSC Wires Embedded In Nuclear Containment

Byeong Hwa KIM (Kyungnam U., S. Korea), Do Hyung Lee (Paichai U., Daejeon,

S. Korea)

Numerical Modeling Of Double Skin Profiled Composite Shear Wall System Under

In-Plane Monotonic Loadings Shahryar RAFIEI, Khandaker M.A. Hossain,

Mohamed Lachemi, Kamran Behdinan (Ryerson U., Toronto, Canada)

On The Shear Forces Distribution In Double Lap Bolted FRP Joints: Numerical And

Experimental Investigations Francesco Ascione, Luciano FEO (U. Salerno, Italy)

Using Microwave Transmission to Detect Decay in Wood

Graham BRODIE, Berhan Ahmed (U. Melbourne, Australia), Mohan V. Jacob

(James Cook U., Australia)

Storage Stability And Physical Properties Of Asphalt Modified With Nanoclay And Warm

Asphalt Additives Mohd Ezree ABDULLAH, Kemas Ahmad Zamhari,

Nafarizal Nayan (UTHM, Johor, Malaysia), Mohd Rosli Hainin (U.Teknologi Malaysia),

Madi Hermadi (UTHM, Johor, Malaysia)

Structural Health Monitoring Of Lattice Girder Railway Bridges

H.A.D.S. Buddika, P.B. Ranjith DISSANAYAKE (U. Peradeniya, Sri Lanka) chair

Environmental Effects On Polymer Insulators

Ibrahim O. HABIBALLAH (King Fahd U. Pet. Min, Dhahran, S. Arabia)

Fiber Composite Application To Protect Bridge Pier Caps From Corrosion Related

Deterioration In New England K. Wayne LEE, Rachel Nichols (U. Rhode Island,

Kingdton, RI), Craig M. Boyer (Electric Boat), P. Balaguru (Rutgers, NJ), C. Franco

(Rhode Island Dept of Trans.) Friday PM

Numerical Study for CFRP Strengthening of RC Columns for Blast Resistance

Saleh H. ALSAYED, Husain Abbas, Yousef Al-Salloum (King Saud U., S. Arabia)

Application Of Ant Colony Algorithm In Discrete Optimal Design Of Structural Truss

Yancang LI, Lina Zhao (Hebei U. Engineering, Handan, China)

Research On Concrete Mixing Sequence At The Time Of Feeding

Fangmeng CHENG, Yancang Li, Lei Wang (Hebei U. Engineering, Handan, China)

Load Test on Reinforced Concrete Beams Strengthened by Carbon Fibre Laminated

Plates—A Case Study Humayun R. H. KABIR (Kuwait U., Safat)

Nonlinear Analysis Of Reinforced Concrete Columns With Fiber Reinforced Polymer Bars

Ehab M. LOTFY (Suez Canal U., Egypt)

Analysis Of Sandwiched Composite Long-Span Foldable Beam

Norazman M. NOR, Agusril, Alias Yusof, Risby Sohaimi, Ahmad M.A. Zaidi

(UPNM, Nat Def. U. Malaysia)

Characterization Of Polymer Mortars Exposed To Some Acid Solutions.

C. GALAN-MARIN; C. Rivera-Gomez (U. Sevilla, Spain)

Recycling Optimisation Of Concrete Composites: An Experimental Study

Mohamed OSMANI (Loughborough U., UK)

Fibrous Brucite and Polypropylene Hybrid Fibers Reinforced Concrete

Kaiping LIU, Jiuran Wen, Zhihua Sun, Zhenjun Wang (Chang’an U., Xi’an, China),

Luciano Feo (U. Salerno, Italy), D. Hui (U. New Orleans)

Reliability-Based Design Optimization Of Adhesive Bonded Steel-Concrete Composite

Beams Yangjun Luo (Northwestern Poly U., Xi’an, China), Alex LI (U. Reims,

France)

Design and Testing of Road Side Guardrail Using Composite Materials A.S. DEBAIKY (Banha U., Egypt) POSTER

Reinforcement of Biodegradable Sago Starch/Natural Rubber Latex (B-SSNRL)

Composites by Ultrafine Calcium Carbonate M.M AFIQ, AR Azura

(U. Sains Malaysia, Penang) POSTER

Underground Structures Analysis In Jointed Rock Environment

Jirí Bostík, Kamila Weiglova (Brno U.T., Czech Rep.) nPOSTER

Modelling Of Underground Structure

Kamila Weiglova, Jirí Boštík (Brno U.T., Czech Rep.) nPOSTER

MAGNETIC COMPOSITES (Thin Films or Electronic Materials)

Depositions Of Proton Conductive Oxide Thin Films By Sol-Gel Method For Fuel Cell

Applications Kiyoshi UCHIYAMA (Tsuruoka Nat. Coll Tech., Yamagata, Japan)

High Energy Thermionic Electron Beam for Material Surface Modification

Munawar IQBAL, Haris Rashid (U. Punjab, Lahore, Pakistan)

Single-Walled Carbon Nanotube/PMMA Composite via an Electrostatic Adsorption

Assembly Technique Hiroyuki MUTO, Norio Hakiri, Go Kawamura,

Atsunori Matsuda (Toyohashi U.T., Japan)

Chirality Control And Vortex Manipulation In Nanomagnets

Kai LIU, Randy K. Dumas, Dustin A. Gilbert, Nasim Eibagi (UC Davis, Calif.)

Mon-Wed

Studies On The Structural, Electrical And Optical Properties Of Sprayed-Copper (I)

Iodide Thin Films Muhamad Nur AMALINA, A.R. Zainun, M. Rusop (U.T. MARA,

UiTM, Selangor, Malaysia)

GePhotoluminescence and Raman Analysis of Ge-Rich SiGe Nanowires

Hua GONG, Yingjie Ma (Fudan U., Shanghai, China), Peixuan Chen (IFW Dresden,

Germany), Lijun Wang (Acad Sci, Beijing, China), Armando Rastelli (IFW Dresden),

Zuimin Jiang, Zhenyang Zhong (Fudan U., Shanghai)

Pyroelectric Nano-Composite Thin Films

Shlomo BERGER, Nitzani (Technion, Israel) Mon-Wed

AB Initio Study Of Structural And Electronic Properties Of InN/Si And GaN/Si Interfaces

Ilya V. MUTIGULLIN, K.K. Abgaryan (RAS, Moscow), D.I. Bazhanov (Moscow

St.U.), O.V. Stepanyuk (RAS, Moscow)

Pulsed Laser Deposition Of LaFeO3 Thin Films Using The Target Prepared By Pechini

Method Yoshito TSUCHIYA, Kento Norota, Yuta Watabe, Takuji Kuroda,

Nobuyuki Iwata,Takuya Hashimoto, Hiroshi Yamamoto (Nihon U., Chiba, Japan)

Effect Of Substrate Temperature On Physical Properties Of Nanostructured Cds Thin

Films Prepared By Spray Pyrolysis Technique

N. Memarian, S.M. Rozati (U. Guilan, Iran)

Exchange Bias In Hybrid Nanocrystals Of Zinc Oxide

Alexandros LAPPAS (IESL-FORTH, Heraklion, Greece), Athanasia Kostopoulou

(IESL-FORTH and U. Crete, Greece), Franck Thétiot (IESL-FORTH), Ioannis Tsiaoussis

(Aristotle U.), Maria Androulidaki (IESL-FORTH), Pantaleo Davide Cozzoli

(Inst. Nanoscience, Lecce, Italy).

Static And Dynamic Strain Sensing Using A Polymer - Carbon Nanotube Film Strain

Sensor Michael K. NJUGUNA, Cheng Yan, John M. Bell, Prasad Yarlagadda

(Queensland U.T., Brisbane, Australia)

Fe-Based Soft Magnetic Bulk Metallic Glass With Flat Hysteresis Curves

Teruo BITOH, Shogo Izumi (Akita Prefectural U., Yurihonjo, Japan)

A Simulation Study On The Effects Of Nanotube Anisotropy And Non-Straightness On

The Electrical Properties Of Carbon Nanotube/Polymer Composites

Ali Erdem EKEN (TU Hamburg-Harburg, Germany), E.J. Tozzi (UC Davis, Calif.),

D.J. Klingenberg (U. Wisconsin-Madison), W. Bauhofer (TU Hamburg-Harburg)

Development of Electrochemical Impedance Spectroscopy for Evaluation Electrical

Properties of Chitosan Membranes Prajak SAEUNG, Wissarut Pauypung,

Pikul Wanichapichart (Prince of Songkla U., Thailand) Mon-Tues

Effect Of Calcination Temperature In Production Of Magnetic Nanoparticles For Arsenic

Adsorption Darunee BHONGSUWAN, Tripob Bhongsuwan, Nucharee Chomchoey,

Lakkana Boonchuay (Prince of Songkla U., Thailand) Mon-Tues

Observation of Local Electrochemical Phase Change in Resistive Switching Devices

Kohei FUJIWARA (Osaka U., Japan), Yosuke Konno, Yoshinobu Nakamura

(U. Tokyo, Japan), M.J. Rozenberg (U. Paris-Sud, France), Hidenori Takagi

(RIKEN, Saitama, Japan)

Effect Of CdSe Nanoparticle In P3HT:PCBM Organic Solar Cell

Mijung CHOI (Myongji U., Gyeonggi, S. Korea), Honghong Fu, Weiling Luan

(East China U.Sci.Tech., Shangha), Yong-Sang Kim (Myongji U.) Wed-Fri

Organic Thin Film Transistor Memory Based On CdSe Nanoparticle/PMMA Blend as a

Tunneling Layer Jung-Min KIM, Dong-Hoon Lee, Jun-Ho Jeun, Hyun Ho Lee

(Myongji U., Gyeonggi, S. Korea), Sung Sik Ko, Ik-Jun Yeon (Chungju N.U.,

Chungbuk, S. Korea), Yong-Sang Kim (Myonggi U.) Wed-Fri

Microfluidic PCR CHIP Integrated With MCU Controlled Temperature System

Dawoon HAN, Mijung Choi, You-Cheol Jang, Kamrul Islam, Rohit Chand,

Sandeep K. Jha (Myonggi U., Gyeonggi, S. Korea), SungSik Ko, Ik-Jun Yeon

(Chungju N.U., Chungbuk, S. Korea), Yong-Sang Kim (Myunggi U.) Wed-Fri

A Study Of The Hysteresis Mechanism Of Organic Thin Film Transistor With Poly

(4-Vinylphenol) Gate Insulator Jon-Ho JEUN, Jung-Min Kim, Dong-Hoon Lee

(Myongji U., Gyeonggi, S. Korea), Sung Sik Ko, Ik-Jun Yeon (Chungju N.U., S. Korea),

Yong-Sang Kim (Myongji U.) Wed-Fri

Nanocrysytals-Glass Composites For Photonic Devices Shifeng ZHOU, Yu Teng (Zhejiang U., Hangzhou, China), Jianrong Qiu

(South China U.T., Guangzhou)

Extrinsic-To-Intrinsic Transition And Sign Changes of Seebeck Coefficients for

PbTe Nanocrystals Wenwen ZHOU, Wenjing Zhang, Jan Ma, Qingyu Yan

(Nanyang U., Singapore)

Electrical Properties Of Few-Layer Boron Nitride

Hongxin ZHANG, Peter X. Feng (U. Puerto Rico)

Ultrasonic Characterization for Electronic Package’s Micro-structure

Chunguang XU, Zhongzhu Liu, Xinyu Zhao, Bolong Men (Beijing I.T., China)

Simulated Body Fluid Evaluation Of Titanium Oxide Layers Exhibiting Different

Morphologies Formed By Electrochemical Plasmacoating Process

Ki Ryong SHIN, Kang Min Lee, You Chan Jung (Hanyang U., Ansan, S. Korea),

Young Gun Ko (Yeungnam U.), Dong Hyuk Shin (Hanyang U.)

Electrochemical Response Of ZrO2-Mgo Layer On Mg Alloy Via Plasma Electrolytic

Oxidation Followed By Annealing Treatment KangMin LEE, Byung Uk Lee,

InJun Hwang (Hanyang U., Seoul, S. Korea), Young Gun Ko (Yeungnam U., S. Korea),

Dong Hyuk Shin (Hanyang U.)

Research on the Characteristics of Dielectric Barrier Discharge and Dielectric Barrier

Corona Discharge Yanzhou SUN, Mi Zeng (Henan Poly U., Jiaozuo, China),

Yan Lu (Henan Coal and Chem. Group, Jiaozuo, China)

Polyoxometalates - Carbon Nanotubes Composites For Electrochemical Capacitors

Tahmina Akter, Gurvinder Bajwa, Keryn LIAN (U. Toronto, Canada) Thurs-Fri

Synthesis And Characterization of GaAs Nanowires On Amorphous Substrates

Jared J. HOU 1, Ning Han, Fengyun Wang, Alvin T. Hui, Guangcun Shan, Fei Xiu,

Tak F. Hung, Johnny C. Ho (City U., Hong Kong, SAR, China)

Piezoelectric Material Especially Bulk-Type Ceramics And Thin Film Processing Sol-Gel.

Sunny JeongSeon HAN (Korea Polytechnic U., Kyunggi)

Synthesis And Electron Field Emission Studies Of Nanocrystalline Diamond Films

P.K. BARHAI, Rishi Sharma, Vijay Chatterjee (Birla I.T., Ranchi, India),

N. Woehrl, Volker Buck (U. Duisburg-Essen, Germany)

Well-Alingned And Conductive Carbon Nanotube/TiO2 Film For Flexible Photoelectrode

Jiangtao DI, Qingwen Li (Suzhou Inst. Nano-tech & Bio-tech., China)

Fabrication And Characterization Of Pure Single Walled Carbon Nanotubes

Microelectrode For Electrochemical Measurement XuanViet NGUYEN,

Yoshiaki Ukita, Yuzuru Takamura (JAIST, Ishikawa, Japan)

Current Properties Depending on Temperature of Hydrogenated Silicon Oxycarbide

Teresa OH (Cheongju U., S. Korea)

Structural Properties Of Magnetite Films Grown By Pulsed Laser Deposition

Qixin GUO, Kazuki Nakamura, Katsuhiko Saito, Tooru Tanaka, Mitsuhiro Nishio

(Saga U., Japan), Makoto Arita, Yoshifumi Ikoma (Kyushu U., Fukuoda, Japan),

Jian Ding, Di Zhang (Shanghai Jiaotong U., China)

Application Of Quasi-Ternary InAsSbP Compound Semiconductors For The Growth Of

Quantum Size Objects On Inas (100) Substrate Karen GAMBARYAN,

Vladimir Aroutiounian, Vardan Harutyunyan (Yerevan St.U., Armenia), Torsten Boeck,

Jan Schmidtbauer, Roman Bansen (Leibnitz Inst, Berlin, Germany)

Highly Aligned Carbon Nanotube/Polymer Composites With Much Improved Electrical

Conductivities Xuemei SUN, Huisheng Peng (Fudan U., Shanghai, China)

Modulation of Metal-Insulator Transition Temperature in W-doped VO2 Thin Films

Toward Mott Devices Hidefumi TAKAMI, Kenichi Kawatani, Teruo Kanki,

Shigenori Ueda 1, Keisuke Kobayashi1, Hidekazu Tanaka (Osaka U., Japan)

Deposition Of Nanometric SiOxHyCz Films At Different Substrate Temperatures By

Atmospheric Pressure Microwave Plasma Torch (Tia):First Steps Towards Self-

Assembled 3-Dimensional Nano-Sensors Xavier LANDREAU, Briac Lanfant,

Thérese Merle, Guillaume Bouscarrat, Zakaria Bouchkour, Christelle Dublanche-Tixier,

Pascal Tristant (U. Limoges, France)

Influence Of The V/Iii Ratio On The Growth Of Group Iii Nitride Quantum Dots

Deposited On Silicon Substrate By Plasma Enhanced Chemical Vapor Deposition

Zakaria BOUCHKOUR, Pascal Tristant, Christelle Dublanche-Tixier, Cedric Jaoul,

Xavier Landreau (U. Limoges, France), Elsa Thune, René Guinebretiere (CEC,

Limoges, France)

Ultraviolet Photodetectors Made By Bridging Wide Bandgap Semiconductor Nanowires

Yanbo LI. Jean-Jacques Delaunay (U. Tokyo, Japan)

Grown Ambient Effect In Gan Crystalline Quality On Si(111) By MOVPE

Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)

Effect Of Modified-Montmorillonite And Poss On Electrical Properties Of Solid Polymer

Elecrolytes Keun-Byoung YOON (Kyungpook Nat U., Daegu, S. Korea),

Dong-ho Lee (Dongyang Mirae U., Seoul, S. Korea)

Time-Integrated And-Resolved Mass Spectrometric Investigations During Laser Ablation

Of Yttrium In High Vacuum Alessio PERRONE, F. Gontad, A. Lorusso

(U. Salento, Italy)

Alternative Support Materials And The Role Of The Support Morphology For The

Electrode Structure S. Zils, P. Bleith, F. Ettingshausen, J. Suffner (TU Darmstadt,

, A. Wolz, M. Michel (Esch-sur-Alzette, Luxembourg), Christina ROTH

(TU Darmstadt, Germany)

Potential-Dependent Band Gap of Polypyrrole Composite

Mahnaz M.ABDI, Luqman Chuah Abdullah (U. Putra Malaysia, Selangor),

H.N.M. Ekramul Mahmud (U. Malaya, Kuala Lumpur), Anuar Kassim,

Mohamad Zaki Ab. Rahman (U. Putra Malaysia)

Nanostructured Mg Thin Films On Cu Substrates For Photocathode Applications

Carmen RISTOSCU, Ion N. Mihailescu (Magurele, Ilfov, Romania(

On The Suitability Of Some Cr-Based Chalcogenides And Pnictides As Spintronic

Materials - Density Functional Results Yong LIU (Yanshan U., Qinhuangdao, Hebei,

China), Shyamal K. Bose (Brock U., St. Catherines, Canada), J. Kudrnovsky (ASCR,

Prague, Czech Rep.)

Magnetism of Quaternary Heusler Alloys: (Cu,Ni)2MnSn as a Case Study

Shyamal K. BOSE (Brock U., St. Catharines, Ontario, Canada), J. Kudrnovsky,

V. Drchal (Czech Acad Sci, Prague)

Molecular Dynamics Simulation For Ultrathin Lubricant Nanofilms With Nonfunctional

And Functional End Groups B. Li, Chee How WONG (Nanyang T.U., Singapore),

S.K. Yu, W. Hua, W.D. Zhou (Data Storage Inst., Singapore)

Optoelectrical Properties of CdSe-Au Nanorod Networks

Peigang LI, Alexandros Lappas (IESL-FORTH, Heraklion, Greece), Romain Lavieville,

Yang Zhang, Roman Krahne (Italian Inst.Tech., Genoa)

A Giant Dielectric Permittivity of BMNO-Bi Composite Films Grown At Room

Temperature By Radio-Frequency Sputtering Hyun-June Jung, Hyun-Ah Song,

Soon-Gil YOON (Chungnam Nat. U., Daejeon, S. Korea) INVITED 25 min

InGaN-Based MSM Photodetectors With Transparent Ga-Doped ZnO Electrodes

P.C. CHANG (Kun Shan U., Yong-Kang, Tainan), A.N. Tu (Nat. Cheng Kung U.,

Tainan), K.H. Lee (Hsinchu) , C.L. Yu, S.J. Chang (Nat. Cheng Kung U.)

Growth and Micro Waves Characterizations of BST and BST/BZN Hetero Structures Thin

Films Denis Remiens (U. Valenciennes, France), Lihui YANG (Shanghai Inst.

Ceramics, SICCAS, China), F. Ponchel, C. Soyer, J.F. Legier (U. Valenciennes),

G. Wang, X. Dong (SICCAS, China)

Preparation And Properties Of Magnetite–Carbon Nanotube Reinforced Polypropylene-

Natural Rubber Blends Ing KONG, Robert Shanks (RMIT, Melbourne, Australia),

Sahrim Ahmad, Lih-Jiun Yu (UKM, Selangor, Malaysia)

Processing Effect of Injection Molded Nanoparticle/Polymer Composites on Their

Electrical Properties Haihong WU, Tiecheng Li (Henan U.T., Zhengzhou, China),

Aiyun Jiang, Baofeng Zhang (Huanghe Sci.Tech. Univ., China)

Synthesis and Characterization of YBa2Cu3Ox Thin Films Incorporating BaSnO3 Length-

Controlled Nanorods Paolo MELE (Hiroshima U., Japan), K.Matsumoto, Y. Honda,

I. Tanak (Kyushu I.T., Japan), A. Ichinose (CRIEPI), Y. Yoshida, Y. Ichino

(Nagoya U., Japan), R. Kita (Shizuoka U., Japan)

Carbon Naotube Composite Films With Switchable Transparency

Fancheng MENG, Xiaohua Zhang, Geng Xu, Zhenzhong Yong, Hongyuan Chen,

Minghai Chen, Qingwen Li (Suzhou Inst Nanotech & Nanobionic, China), Yuntian Zhu

(N.Carolina St.U., Raleigh)

Phase Transition And Magnetic Properties Of Ferromagnetic Shape Memory

Fe66Pd30Rh4 Alloys Chien-Feng LIN, Jin-Bin Yang (Nat. Kaohsiung First U. Sci

Tech.)

Optical Properties Dependence As Function Of The Temperature In Aln Films Deposited

By PLD Jaime A. PEREZ, H. Riascos (U.T. Pereira, Colombia), J.C. Caicedo

(U. Valle, Cali, Colombia), L. Yate (U. Barcelona, Spain)

Beyond Complementary Metal Oxide Semiconductor (CMOS): Materials and Engineering

Arezki BENFDILA (Univ. M. Mammeri, Algeria)

Structural and Electrical Properties of Tin Selenide Film

Z.A. Talib, J.Y.C. Liew, W.M.M. Yunus, Z. ZAINAL, S.A. Halim

(U. Putra Malaysia, Selangor)

Biomaterial Aisi 316l Ss Surface Film Analyses After Electropolishing Treatments Under

Varied Magnetic Fields Tadeusz HRYNIEWICZ, K. Rokosz (Koszalin, Poland)

Resistivity/Conductivity of Inorganic Oxides by Optical Interferometry Techniques

Khaled HABIB, Amer Al-Arbeed (KSIR, Safat, Kuwait)

Synthesis Of Cobalt/Gold Bimetallic Hollow Microspheres And Its Optical Properties

Cheng-Seong KHE, Azizan Aziz, Zainovia Lockman (U. Sains Malaysia, Penang)

Combination of Micro-Fluidics and Sol-Gel Templating for Nanostructuring of Titania

Thin Films for Photovoltaic Application Monika RAWOLLE, Matthias A. Ruderer,

Stefan M. Prams, Qi Zhong, David Magerl (TU Muenchen, Germany), Jan Perlich,

Stephan V. Roth (HASYLAB at DESY, Hamburg), Philipp Lellig (MPI-P, Mainz),

Jochen S. Gutmann (U. Duisburg-Essen), Peter Müller-Buschbaum (TU Muenchen)

Nitrogen or Oxygen Bonds Passivating on Surface of Si Quantum Dots Formed by

Nanosecond Pulse Laser Wei-Qi HUANG (Guizhou U., Guiyang, China),

Shi-Rong Liu (CAS, Guiyang, China), Quan Lü (Guizhou U.), Chao-Jian Qin

(CAS, Guiyang)

Enhanced Optical Transparency In 3D Nanostructured Films

Bernardo S. MENDOZA (CIO-Mexico), W. Luis Moch´an (ICF-UNAM-Mexico),

Guillermo P. Ortiz (Univ. Nac. del Nordeste, Argentina)

Sol-Gel Templated Titaniumdioxide Films for Solar Cell Applications

Peter MUELLER-Buschbaum, Monika Rawolle, Martin A. Niedermeier, Kuhu Sarkar,

Philipp Lellig (Max-Planck, Mainz, Germany), Jochen S. Gutmann (U. Duisburg-Essen)

Theory Of Electrostatic Interaction Between Polymer-Coated Composte Particles

Hiroyuki OHSHIMA (Tokyo U. Sci, Japan)

Physicotechnological Peculiarities Creating A New Class Of Piezoelectric Materials Based

On The Hybrid Of Matrix Nano- And Micropiezoelectric Composites

M.K. Kerimov, M.A. Kurbanov, A.A. BAYRAMOV, I.S. Sultanakhmedova,

F.N. Tatardar, A.A. Mextili, G.Ch. Gulieva, I.N. Orudjev (Nat. Acad. Sci, Azerbaijan)

Expansion Of The Ferroelectric Phase Temperature Interval In The Composites

(KNO3)1-x (BaTiO3)x and (KNO3)1-x(PbTiO3)x

Elena V. STUKOVA, S.V. Baryshnikov (Amur St. U., Russia) POSTER

Electromechanical Properties Of Polyether-Based Polyurethane Composites Filled With

Functionalized Multi-Walled Carbon Nanotubes K. Wongtimnoi,

Benoit GUIFFARD, A. Bogner–Van de Moortele, L. Seveyrat, J.-Y. Cavaille

(INSA-Lyon, France) POSTER

MATHEMATICAL MODELING (Engineering Mechanics)

Application Of Indentation Fracture Mechanics Approach For Determination Of Fracture

Toughness of DLC Coating Ceramics Materials Yan-rong WANG,

Sheikh-Md. Rasel, Hyoun-kon Ku, Jung-il Song (Changwon N.U., S. Korea)

Structural Analysis of Steam Surface Condenser

Jian-Guang ZHAI (Changwon Nat.U., S. Korea), Jong-Rae Cho (Korea Maritime U.,

Busan), Hua-Hou (North U. of China, Taiyuan, China), Yan-Rong Wang, Jung-Il Song

(Changwon N.U.)

Nonlinear Static Analysis Of A Beam Made Of Functionally Graded Materials

Julien Thivend, Habib Eslami, Yi ZHAO (Embry-Riddle Aero U., Daytona Beach, FL)

Stress Relaxation Of Impact Damaged Composites

Yuanjian Tong (Swansea U., UK, & Beijing U.Chem.Tech.), David H Isaac

(Swansea U.)

Contacts In Ceramic-Carbon Nanocomposites

Peter ARATO (Budapest, Hungary)

Strategies For Improving Ductility Of Bulk Nanostructured Materials

Yonghao ZHAO (U. Shanghai Sci &Tech., UC Davis, Calif.)

Evaluation the Preferred Particle Geometry for Dental Composite Using the Inverse

Damage Strength Analysis Approach Y.P. CHAN, C.Y. Tang

(Hong Kong Poly U., China)

Numerical Method for Calculating Load Distribution in Multi-Bolt Thick Laminate Joints

W.X. Liu, Longquan LIU, R. Wei (Shanghai Jiaotong U., China)

Response Of Beam Due To Impact Load

CheeSiang CHONG, Kameswara Rao N.S.V. (U. Malaysia Sabah)

Free Vibration of Composite Plates Subjected to Magnetic Field and Temperature

Gradient Ohseop SONG, Sung-Kyun Kim, Jong-Woon Choi, Young-Jun Kim,

Sang-Yun Park (Chungnam N.U., Daejeon, S. Korea)

Using Taguchi Method To Improve Composite Materials Learning – MSU Example

Guanghsu A. CHANG (Minnesota St.U., Mankato)

Fluid-Structure Interaction Analysis Of Pulsatile Flow In A Layered Anisotropic Aortic

Wall Ying LIU, Shuai Yang (Beijing Jiaotong U., China)

Analysis of Micromechanical Behavior in Short Fiber Composites

HongGun KIM, Lee Ku Kwac, Seung Gyu Oh, Tae Hoon Kim, Bophang Sorn,

Hee Jae Shin (Jeonju U., S. Korea), Chai Young Lim, Ki Hyun Yoo, Jeong Sang Song,

Yong Hong (Chonbuk, S. Korea)

Delamination Detection In Composite Laminates By Ultrasonic Guided Wave

Yue LIANG (Penn St.U.), Fei Yan (FBS, St.Coll., PA), Cody Borigo, Joseph. L. Rose

(Penn St.U.)

Effect Of Porosity On The Mechanical Properties Of YSZ/NiO Composite Anode Materials

Dan JIA, Aixi Zhou (U. North Carolina-Charlotte),Yang Ling, Ke An, A.D. Stoica,

Xun-Li Wang (Oak Ridge N.L., TN)

Mechanical Characterization And Finite Element Modeling Of NBR And PDM For

Directional Drilling Henry K. GONZALEZ, Jianren Zhou, Shield Lin

(Prairie View A&M U., TX)

Shape, Displacement And Strain Measurements By Sampling Moire Method

Yoshiharu MORIMOTO (moire Inst. Osaka, Japan), Motoharu Fujigaki, Akihiro Masaya

(Wakayama U., Japan)

Free Vibration Analysis Of Grid Stiffened Composite Cylindrical Shells

Milad HEMMATNEZHAD, Hossein Rahimi (Tarbiat Modares U., Iran)

Thermal Stability Analysis Of Tapered Fgm Annular Plates Under Nonuniform

Temperature Distribution- A Finite Element Approach

Mansour Mohieddin Ghomshei, Vahid Abbasi (Islamic Azad U., Iran)

Effect Of The Microstructure On The Properties Of Ceramic–Elastomer Composites With

3D Connectivity Of Phases Anna BOCZKOWSKA (Warsaw U.T., Poland)

In-Plane Dynamic Displacement Measurement Using A Pointwise Fiber Bragg Grating

Sensing System Kuo-Chih CHUANG (Zhejiang U., Hangzhou, China),

Chien-Ching Ma (Nat. Taiwan U., Teipei) Mon-Tues

Thermomagnetoelastic Behavior Of A Rotating Functionally Graded Hollow Cylinder

Zengtao CHEN, A. Hamid Akbarzadeh (U. New Brunswick, Canada)

Precipitation In Alloys: A Kinetic Monte Carlo And Class Model Study

David BOMBAC, Goran Kugler (U. Ljubljana, Slovenia)

Modeling And Analysis Of Dynamic Crack Propagation In A Nanoscale Bi-Layer Metallic

Composite Ram Mohan, Yojna Purohit (NCAT, Greensboro, NC)

Buckling And Postbuckling Behavior Of Laminated Stringer Stiffened Composite

Cylindrical Panels Haim ABRAMOVICH (Technion, Israel)

Searching for the Optimum Conditions of NLC-Sunscreen Formulae by Using Taguchi’s

Method Pao-Chi CHEN, H.C. Chen, J.W. Huang (Lunghwa U.Sci.Tech., Taoyuan),

J. Pang (Taiwan AC Sci. Inc., Taoyuang)

Monte Carlo Simulation Of Defects In Hard-Sphere Crystal Grown On A Squsre Pattern

Atsushi MORI, Yoshihisa Suzuki, Shigeki Matsuo (U. Tokushima, Japan)

Characterization Of Fluid Dynamic Properties Of Schwarz’s Primitive Cellular Materials

Che-Cheng Chang, Shewei ZHOU, Yuhang Chen, Qing Li (U. Sydney, Australia)

Prediction of Mechanical and Barrier Properties of Chlorobutyl Rubber/Natural Rubber

Blend using Artificial Neural Networks Lin LI, Jin Zhang, Z X Zhang, Jin Kuk Kim

(Gyeongsang Nat. U., S. Korea)

On Particle Impact Induced Bond Breaking Of Single-Walled Carbon Nanotubes

Puroorava Chakravarthy, Gang LI (Clemson U., SC)

Nonlinear Thermo-Mechanical Responses Of Smart Skin Sturctures

Kwang-Kyu YOO, Ji-Hwan Kim (Seoul Nat.U., S. Korea) Mon-Tues

Hygrothermal Effects On The Structural Behaviors Of Functionally Graded Plates

Chang-Yull LEE, Ji-Hwan Kim (Seoul N.U., S.Korea) Mon-Tues

Identifying Material Properties Of Composite Materials From Vibration Data

Zubaidah Ismail (U. Malaya, Kuala Lumpur), Henry Khov, Wen L. LI

(Wayne St.U., Detroit, MI)

Divergence Of Composite Aircraft Wings Accounting The Aerodynamic Finite-Span Effect

Yan HONG, Zhanming Qin (Xi’an Jiaotong U., China)

Nonlinear Dynamics And Vibrations For Geometrically Nonlinear Composite Aircraft

Wings Ji-seok SONG, Hwanhee Lee, Seog-Ju Cha, Sungsoo Na (U. Korea, Seoul),

Zhanming Qin (Xi’an Jiaotong U., China)

Internal Resonance Of Composite Sandwich Panels With Transversely Compressible Core

Yizhe FENG, Zhanming Qin, Guiping Zhao (Xi’an Jiaotong U., China)

Study on Algorithm of Adaptive Path Planning for Automated Placement on Mesh

Surface Wenlei XIONG, Wang Xianfeng, Xiao Jun (NUAA, Nanjing, China)

Numerical Study Of Scale Effects On The Delamination Of Laminates Under Low-Velocity

Impact Yajun Chen, Zhefeng YU, Hai Wang (Shanghai Jiaotong U., China)

Optimization Of Drilling Conditions Of Glass Fibre Reinforced Plastic Composite Material

Using Genetic Algorithm N.S. MOHAN, Jagannath K, S.S. Sharma,

Chandrashekar Bhat (Manipal Inst.Tech., India)

Performance of Thin Walled Composite Beams with Stochastic Properties under Matrix

Cracking Damage Babruvahan P. RONGE, Prashant M. Pawar (Pandharpur, India)

Fuzzy Logic based Matrix Crack Detection in Thin-walled Composite Beam under

Material and Fabrication Uncertainties Prashant M. PAWAR, Babruvahan P. Ronge

(Pandharpur, India)

The Study On A Numerical Controlled Multi-PinsInserting System For Z-Pinned

Composite Laminates Preparation Liping.DING, Junwei.Qi, Biao.Yan, Jun.Xiao,

Liwei.Wen (NUAA, Nanjing, China)

Mathematical Modeling For Single-Walled Carbon Nanotubes (SWCNTs) Based On

Magneto-Electro-Elastic Beam Model Mei-Feng LIU, Tai-Ping Chang

(I-Shou U., Kaohsiung)

The Influence Of Incorporation Of Pulp And Paper Mill Secondary Sludge In Urea-

Formaldehyde Resin On Mechanical And Physical Properties Of Particleboard

Panels Suying XING, Bernard Riedl (U. Laval, Canada), Amed Koubaa

(U. Quebec, Canada), James Deng (FPInnovations, Quebec, Canada)

Evaluation Of Stress Field For An Elliptical Inhomogeneity With Imperfect Interface In

Anisotropic Media C.K. CHAN (Hong Kong Poly U., China), Z.Q. Huang, G.H. Nie

(Tongji U., Shanghai, China)

Effects Of Cutout Shapes On Postbuckling Response Of Quasi-Isotropic Laminate Under

Combined In-Plane Loads Dinesh KUMAR, S.B. Singh (Birla I.T.,and Sci., India)

Mon-Tues

A Semidefinite Harmonic Oscillator For Seismic Analysis Of Structures In A Complex

Space. A Physical And Mathematical Shake Table J. L. URRUTIA-Galicia

(UNAM, Mexico D.F.)

Multi-Sphere Models Of Particles In Discrete Element Simulations

Rimantas KACIANAUSKAS, Darius Markauskas (Vilnius Gediminas T.U.,

Lithuania)

Research Of Nanostructural Tool Materials Servosurfaces

A.S. SYROMYATNIKOVA, M.N. Safonova, A.A. Fedotov A.A (Yakutsk, Russia)

Development Of Methods Of Severe Plastic Deformation And Research Methods Of

Ultrafine Steels N.D. PETROVA, A.M. Ivanov, Eu S. Lukin (Yakutsk, Russia)

Use Of Ultradisperse Modifiers For Production Of Wear Resistant Powder Coatings And

Materials M.Z. BORISOVA, G.G. Vinokurov, N.F. Struchkov, M.I. Vasileva

(Yakutsk, Russia)

Multiscale Modeling Of Deformation Processes In Situ

Valeriy V. LEPOV (Yakutsk, Russia), Boris A. Loginov (Moscow Inst Electronics,

Russia)

Study Of Dynamic Drop Impact Response Of Open-Cell Metal Foam

Yishi SU, Xiaolu Gong (U.T. Troyes, France)

Creep-Buckling Failure Of Open-Cell Foams Under Uniaxial Compression

Ting-Jung Chen, Jong-Shin HUANG (Nat. Cheng Kung U., Tainan)

New Statistical Functional Nonparametric Methods For Study Of Nanomaterials

Salvador NAYA, Ramon Artiaga, Mario Francisco-Fernandez, Javier Tarrío-Saavedra,

Jorge López-Beceiro (U. Coruna, Ferrol, Spain)

Flexural, Shear And Compressive Properties Of Bioresorbable PLA-PBG Fibre Reinforced

Composite Intramedullary Rods R.M. Felfel (Mansoura U., Egypt), I. Ahmed,

A.J. Parsons, G.S. Walker, C.D. RUDD (U. Nottingham, UK)

Preparation And Microstructural Characterization Of Carbon /Carbon Composite

Ramani VENUGOPALAN, D. Sathiyamoorthy, A.K. Tyagi (Mumbai, India)

The Interaction Between A Screw Dislocation And A Semi-Infinite Wedge Crack With A

Nano Circular Inclusion At Tip Hao-Peng SONG. Cun-Fa Gao (NUAA, Nanjing,

China)

A Study on Improvement of Laminate Structures Subjected to Low-Velocity Impact

Guang-Min LUO (Nat. Kaohsiung Marine U., Kaohsiung)

Special Interface Design For Adhesion Improvement

Renate MIX, Huajie Yin, Joerg Friedrich (BAM, Berlin, Germany)

A Cellular Automata Simulation For The Tension Behavior Of Carbon Nanotubes

X.H. Huang, X.Q. HE (City U., Hong Kong, China)

Thermal Radiation Characteristics Of Silicon Inverse Opal In Mid Infrared Range

Jing XU, Yujie Li, Rongsheng Liu, Kai Xie (Nat. U. Def.Tech., Changsha, China)

Dynamic Response Analysis of Shear Deformable Laminated Beam with the Method of

Reverberation Ray Matrix F.X. Miao (Ningbo U., China), Guojun SUN

(Shanghai Jiaotong U., China)

Tensile And Fracture Behaviour Of Die-Drawn Polypropylene-Clay Nanocomposites

Abdullhadi ALSHEHRI (SABIC, Riyadh, S. Arabia), J. Sweeney, P. Caton-Rose,

P.D. Coates (Bradford U.,UK)

Functional Stability Of SMP Based Syntactic Foam

Samuel I. IBEKWE (Southern U. Baton Rouge, LA), Tao Xu (Southern U. Nanjing,

China), Guoqiang Li (S.U. Baton Rouge, and L.S.U.)

Design Of Experiments For Improving The Tensile Strength Of Rapid Prototyping

Polymer Materials James Clements, Rafiq NOORANI (Loyola Marymount U.,

Los Angeles, Calif.)

Mechanical Behavior Of Carbon Nano-Crystallites Forming Carbon Fibers

Melanie TODT, Franz G. Rammerstorfer (Vienna U.T., Austria), Oskar Paris,

Franz D. Fischer (Leoben, Austria)

Interface Fracture Mechanics Of Nanoscale Components On A Substrate

Hiroyuki HIRAKATA, Taku Nishihira, Akio Yonezu, Kohji Minoshima (Osaka U.,

Japan)

Mechanical Behavior Of Metallic Nanowires Containing Vacancy Cluster Defects

Pei-Hsing HUANG, Lay Gaik Teoh, Yu-Ren Wu, Ming-Yue Huang, Hong-Yi Li

(Nat. Pingtung U. Sci Tech., Neipu)

Modeling Of Ecological Plastic Lubricant Flow

Martin VASINA (Tomas Bata U., Zlin, Czech Rep.), Lumír Hruzík (TU Ostrava,

Czech Rep.)

Compression Fatigue After Impact Testing Of Thermosetting Composites

Volker ALTSTAEDT, Manuel Kempf, Sebastian Schwaegele (U. Bayreuth, Germany),

Andreas Ferencz (Henkel AG, Duesseldorf, Germany)

The Thermal Problem of Functionally Graded Material Substrate-Coating Structure

Lifang GUO (Shanghai Jiaotong U., China),. Xing Li (Ningxia U., Yingchuan, China)

Application Of Hilbert-Huang Transform To The Signal Analysis Of Sonic Echo Testing

Sheng-Huoo NI, Li-Ting Hsu (Nat. Cheng-Kung U., Tainan)

Effect Of Porosity On Impact Strength Of Vitrified Bond Diamend Wheels

Yong-gai Hou, Fu-ren XIAO, Gui-ying Qiao (Yanshan U., Qinhuangdao, China),

Wen-jun Zou (Henan U.T., Zhengshou, China), Bo Liao (Yanshan U., China)

Applicability Of Gibbs Adsorption Equation To Deformed Solid Surfaces

Emmanuel M. GUTMAN (Ben-Gurion U. Negev, Israel)

A Boundary Perturbation Analysis For A Multilayer Film Coating

Sergey A. KOSTYRKO, M.A. Grekov (St. Petersburg State U., Russia)

Exact Solution Of Edge-Bending Buckling Of Rectangular Orthotropic Plates

Shyh-Rong KUO (Nat. Taiwan Ocean U., Keelung), J.D. Yau (Tamkang U., Taipei)

Magneto-Elastic Response Of Rectangular Orthotropic Plates Due To Multi-Lane

Moving Loads Jong-Dar YAU (Tamkang U., Taipei)

BGA Impact Analysis: Numerical Study

Rasha M. Soliman, Medhat Awad El-Hadek, Shaban Ibrahim ABDOU (Port-Said U.,

Egypt)

On Different Projectile Nose Shapes in Soil And Foam Penetration

Ce XU, Fenghui Wang, Shaoming Wang, Tiejun Liu (Northwestern Polytech.U.,

Xi’an, China)

The Frictional Effects In Harmonic Circuit

Carmen BAL, Carmen Ioana Iuhos, Nicolae Bal (TU Cluj Napoca, Romania)

The Blind Hole Influence In The Residual Stresses Determination

Nicolae BAL, Carmen Ioana Iuhos, Carmen Bal (TU Cluj Napoca, Romania)

An Effective Flaw Model On Analyzing Nanofiller Agglomeration In Nanocomposite

Materials L. Roy XU, Arun Krishnan (U. Texas-El Paso) Mon-Tues

Maximum Amplitude of Solutions on a Ball for a Generalized Lane-Emden Equation

Abeer YASIN (U. Western Ontario, Canada)

Optimal Vibration Control of Smart Fibre Reinforced Polymer Spherical Shells

Debabrata CHAKRABORTY, Tarapada Roy (Indian Inst. Tech. Guwahati)

A Numerical Method for Studying Thermal Deformation in 3D Double-Layered Thin

Films with Imperfect Interfacial Thermal Contact Exposed to Ultrashort-Pulsed

Lasers Runzhou Liu, Weizhong DAI (Louisiana Tech. U., Ruston)

Numerical Analysis of a Transversal Crack in a Steel Slab

Frantisek KAVICKA, Jana Dobrovska, Karel Stransky, Bohumil Sekanina, Josef Stetina

(Brno U.T., Czech Rep.)

Delamination Analysis At Free Edges Of Composite Laminates

Bosko RASUO. Mirko Dinulovic (U. Belgrade, Serbia)

Effect Of Poisson’s Ratio On Flexibility Of Smooth Orthotropic Pipe Bend

K. M. GUPTA (Motilal Nehru Nat.Inst.Tech., India)

Load-Displacement Behaviour of AA 7075-T6 Holed And Clamped Plates At Different

Environmental Temperatures R.H. OSKOUEI, Joe Elambasseril, R.N. Ibrahim

(Monash U., Clayton, Australia)

Tensile Strength of Pandanus Odoratissimus Fibers Reinforced Unsaturated Polyester

Composite Hairul ABRAL, Heri Andriyanto, Ilhamdi (U. Andalas, Indonesia)

Meshless Methods For The Quasi-3d Analysis Of Functionally Graded Elastic Cylinders

Chih-Ping Wu, Shih-Wei Yang (Nat. Cheng Kung U., Tainan)

Modeling Of Creep Behaviour Of A Composite Material

Ahmed KOUADRI-Boudjelthia (Chlef, Algeria), A. Bouabdallah (Algiers, Agleria),

M. Tahar Abbes (Chlef, Algeria)

Degradation Measurement Of Fibrous Reinforcement Inside Composite Material

Marie Lefebvre, Francois BOUSSU, Daniel Coutellier (U. Lille Nord de France)

A Model For Nanomechanical Behaviours Of Microcantilever-Based Single-Stranded Dna

Chips Induced By Conformational Entropy Neng-Hui ZHANG, Zou-Qing Tan,

Jin-Ying Shan (Shanghai U., China)

Nonlinear Modeling And Optimization Of Parameters For Viscoelastic Composites An

Nanocomposites Brian Dandurand, Irina VIKTOROVA (Clemson U., SC),

Sofia Alexeeva (Moscow, Russia)

Matrix Analysis Of Structural Composite Laminates

Mahiuddin CHOWDHURY (U. New South Wales, Sydney, Australia)

poster display, not attending

METALS ENGINEERING (MMC)

Structure Of Al87Ni8Dy5 In Amorphous And Nanocrystalline State

S.I, Mudry, Yu.O. Kulyk (Nat. U. Lviv, Ukraine)

Mechanical Properties Of Hot Corrosion Tested APS And EB-PVD Multilayer Thermal

Barrier Coatings Using Nano Indentation Ravinder M. DIWAN, Patrick F. Mensah,

Naresh Polasa (Southern U., Baton Rouge, LA), Douglas E. Wolfe (Penn St.U.)

Coupled Metal Nanoparticles with Enhanced Optical Properties and Their Applications

Zhenping Guan, Polavarapu Lakshminarayana, Cuifeng Jiang, Qing-Hua XU (Nat. U.

Singapore)

Mechanical and Microstructural Analyses of Cu-15at% Ag Nanocomposite Processed By

High Pressure Torsioning KiHwan OH, HoByung Kim, SunIg Hong*

Nanotubes Formation on Ti-6Al-4V and Zr-1Nb Alloys Through Anodization And Its

Biomineralization Analysis Ju-Young JIN, A.J. Nathanael, S.I. Hong

Effect Of Heat Treatment On The Mechanical Response And Fracture Behavior In STS304/Al1050/STS439 Clad Material Jun-Young SONG, In-Kyu Kim,

Sun Ig Hong

sihong@cnu.ac.kr

Effect Of Alloying On The Deformation Behavior And Slip Mode Of Cu-16at%Al Single

Crystals At Various Temperatures JongSu HA, SunIg Hong (Cheungnam Nat. U.,

Daejeon, S. Korea)

Effect of Interfacial Reaction Layer On The Cracking Behavior in 3-ply Mg/Al/STS Clad-

Metal In-Kyu KIM, Jun-Young Song, SunIg Hong (Cheungnam Nat. U., Daejeon,

S. Korea)

Microstucture and Mechanical properties of Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Processed by

HPT (High Pressure Torsioning) Ho-byung KIM, Ki-Hwan Oh, Sun Ig Hong

(Cheungnam Nat. U., Daejeon, S. Korea)

Oxidation and Mechanical Properties of Zr-1Nb-1Sn-0.1Fe Alloys At High Temperatures

EunKyu LEE, JongMin Lee, SunIg Hong (Cheungnam Nat. U., Daejeon, S. Korea)

Control Of Structure And Properties Of Welded Connections Of Medium Alloy Steels By

Application Highly Concentrated Pulse Energy Actions A.A. DEMYANCHENKO,

Yu N. Saraev (RAS, Tomsk, Russia)

Adaptive Pulse Technological Processes Of Welding And Pad Weld Is A New High-

Performance Method Of Obtaining Of Permanent Joints Of High-Strength Steels

Yu N. SARAEV (RAS, Tomsk, Russia)

The Improvement Of Oxidation Behavior Of Powder Metallurgy Made Fe-Cr Alloys

Yen-Ting Liu, Shuang-Shii LIAN (Nat. Taiwan U., Taipei), Wei-Ja Shong, R.Y. Lee

(INER, Taoyuan)

Oxidation Behaviour Of Ion-Implanted Nanocrystalline Fe-Cr Alloy Fabricated By

Different Densification Techniques: Spark Plasma Sintering And Hot-Pressing

Darwin SEBAYANG, Deni S. Khaerudini, H. Saryanto, M.A. Othman, S. Hasan

(UTHM, Johor, Malaysia), D. Fredrick (Santa Rosa, Calif.), T. Sujitno, P. Untoro

(Banten, Indonesia)

Structure And Hardness Of Copper-Doped Soda-Lime Silica Glass

Maria SUSZYNSKA (PAS, Wroclaw, Poland), Agnieszka Cizman (Univ.Tech.,

Wroclaw, Poland)

Mechanical Suppression Of Tunneling Between Metallic Beads

Aymen TEKAYA, R. Bouzerar (U. Picardie Amiens, France), V. Bourny (U. Picardie)

Thermal Fatigue Behavior And Cracking Characteristics Of Indefinite Chill Iron Rolls

Peter FAJFAR, Milan Tercelj, Matevz Fazarinc (U. Ljubljana, Slovenia), Borut Zuzek

(Inst.Metals Tech., Ljubljana)

Mechanical Properties Of Particle Reinforced Magnesium Composites SiCp/AZ80 Song-Jeng HUANG, Chi-Rung Li, Kai-Lun Yan (Nat. Chung Cheng U., Chia-Yi)

Laser Cladding Of Cu0.5 NiAlCoCrFeSi High Entropy Alloy On AZ91D Magnesium

Substrates T.M. YUE, K.J. Huang (Hong Kong Poly U., SAR, China)

The Improvement of Oxidation Behavior of Powder Metallurgy Made Fe-Cr Alloys

Yen-Ting LIU, Shuang-Shii Lian (Nat. Taiwan U., Taipei), Wei-Ja Shong, R.Y. Lee

(Inst. Nuclear Energ Res.)

A Comparative Study Of Corrosion Resistance On Metal Joint By Using Different Types

Of Cooling Method W.B. Wan NIK (U. Malaysia Terengganu), R. Rosliza (TATI U.

Coll., Kemaman) , O. Sulaiman (U. Malaysia Terengganu), Y. Prawoto (U.Teknologi

Malaysia), M.F.R. Zulkifli (U. Malaysia Terengganu), David Hui (U. New Orleans)

Microstructure And Room Temperature Mechanical Properties Of NiAl-Cr(Mo)-Hf/Dy

Eutectic Alloy Prepared By Injection Casting L.Y. SHENG, T.F. Xi

(Peking U., China), J.T. Guo (IMR, Shenyang, China), Y.F. Zheng (Peking U.),

H.Q. Ye (IMR, Shenyang)

A Analysis Of The Transverse Strength Of Ti-Based Matrix Composite Reinforced By SiC

Fiber Bing ZHAO, HongLiang Hou, JinHua Liao, Bo Jiang (Beijing Aero. Manuf.

Res.Inst., China)

Strength And Magnetism Of Nanocomposites Formed By 3d-Metal Nanochains Embedded

In A Non-Magnetic Matrix Mojmir SOB (Masaryk U., Brno, Czech Rep.), T. Kana

(ASCR, Czech Rep.)

Further Development Of Oxide Dispersion Hardened Platinum Alloyswith Improved

Strength At High Temperatures Bernd FISCHER (U. Applied Sciences, Jena,

Germany), Uwe Jantsch, Michael Koch (Hanau, Germany)

Strengthen Mechanism Of In Situ TiB/TiC Reinforced Ti 1100 Composites And Finite

Element Analysis Fei ZHAO (Shanghai Jiaotong U., China), Xiaolu Gong

(UT Troyes, France), Di Zhang (Shanghai Jiaotong U.)

A Novel Discharge Technique For Noble.Metal Nanoparticles

Xiulan HU, Osamu Takai, Nagahiro Saito (Nagoya U., Japan)

Evolution Of Goss Orientation During Rapid Heating For Primary Recrystallization In

Grain-Oriented Electrical Steel Eun-Jin LEE, Sung-Ji Choi, No-Jin Park

(Kumoh Nat. I.T., Gumi, S. Korea)

Effects Of Initial Microstructure On The Development Of Microstructure And Mechanical

Properties In Energy Saving AZ31 Magnesium Alloy During Hot Rolling

No-Jin PARK, Sun-Hea Hwang and Chang-Wan Ha (Kumoh Nat. I.T., Gumi, S. Korea)

Volatile Organic Compound Gas Sensor Based On Meso-/Macro Porous Semiconducting

Metal Oxide Duc Hoa NGUYEN, Sherif A. El-Safty (NIMS, Ibaraki, Japan) chair

Stir Casting Technique For Low Melting Point Metal Matrix Composites And

Characteristic Study K. JAGANNATH, S.S. Sharma, N.S. Mohan, P.R. Prabhu

(Manipal, India)

The Effect of Particle Shape on the Mechanical Properties of Particle Reinforced Metal

Matrix Composites: 2D Model Approach K.K.S. MER (G.B.P.E.C., Uttarakhand,

India), B.K. Mishra, S. Ray (Indian Inst.Tech., Roorkee)

Thermomechanical Structuring Of Steel For Fabrication Of Ultrafine Grained Or

Nanocrystalline Materials Maria Z. BORISOVA, S.P. Yakovleva, S.N. Makharova

(Yakutsk, Russia)

Mechanical Properties of Al-Cy-Mg Alloys Micro-Alloyed with Sn

P.S. ROBI, A. Srinivasana, Sanjib Banerjee (Indian I.T., Guwahati)

Characteristics of CrAlSiN Coatings With Post-Deposition Annealing Treatment

Wei-Yu HO, Chi-Wei Chen, Chia-Hang Tsai, Da-Yung Wang (MingDao U., ChangHua)

Residual Stress Measurement On 2024 Aluminum With Different SMAT Treatments

Hao JIANG, Ka Po Cheung, Limin Zhou (Hong Kong Poly U., China), Jian Lu

(City U., Hong Kong, China)

Metal-Metal Bonding Process Using Copper Nanoparticles

Yoshio KOBAYASHI, Satoshi Ishida, Kazuaki Ihara (Ibaraki U., Japan),

Yusuke Yasuda, Toshiaki Morita (Hitachi Ltd, Japan) Wed-Fri

Study Of Cooling Rate Effect On Back-Diffusion During Solidification Of Continuously

Cast Steel Billet Jana DOBROVSKA (TU Ostrava, Czech Rep.), Frantisek Kavicka

(Brno U.T., Czech Rep.), Hana Francova, Věra Dobrovska (TU Ostrava)

Phase Separation Related To Medium Range Order In Crystallization of Al83Ni8Si2Ce7

Metallic Glass Shenghai WANG, C.C. Yang (Hebei U. Engineering, Handan, China)

Core-Shell Structure And Mechanical Behavior Of A New Type Of Iron-Containing

Titanium/Hydroxyapatite Composites Q. Chang, Daolun CHEN (Ryerson U.,

Toronto, Canada), H.Q. Ru, X.Y. Yue, L. Yu, C.P. Zhang (Northeastern U., China)

Mon-Wed

Effects Of Electro-Discharge Machining Parameters On Surface Integrity Of Aluminium

Composite A.M. ABDUL-RANI, A. Mouangue Nanimina (U.T. Petronas, Perak,

Malaysia)

Improvements In Wear Properties Of Ti-6Al-4v Alloy By Thermal Oxidation Process

Sarala UPADHYA, B.K. Muralidhara (U. Visvesvaraya Coll. Engrg., Bangalore, India)

POSTER

NANO COMPOSITES

Glass Transition Temperature And Structural Relaxation Of Polymer Nanoparticles

Under Soft And Hard Confinement Yunlong GUO, Chuan Zhang, Christine Lai,

Rodney Priestley (Princeton U., NJ)

Carbon Nano Coil Synthesized On Zero-Dimensional Silica

Huy-Zu CHENG, Chang-Cheng Su, Tin-You Chen, Guo-Ju Chen, Kuo-Jung Lee

(I-Shou U., Kaohsiung)

Processing and Characterisation of a Polyamide 12-Carbon Nanotube Composite by Laser

Sintering Jiaming BAI, Ruth Goodridge, Richard Hague, Mo Song (Loughborough U.,

UK)

Optical Properties of Silica Opal Templates in the Visible and Infrared

Mark AUSLENDER, Shlomo Hava (Ben-Gurion U., Israel)

Sol Gel Derived Bioactive Glass Nanoparticles in the SiO2-CaO-MgO-P2O5 System

M.R. SAERI, A. Doostmohammadi (Shahrekord U., Iran)

Atomic Layer Deposition and Template Replication for Nanotechnology Engineering

Diefeng GU, Gon Namkoong, Helmut Baumgart (Old Dominion U., Norfolk, VA)

Comparing The Effect Of Nano-CaCO3 And Nano-ZnO On Rheological Properties Of

Polypropylene Using Several Models Hassan EBADI-Dehaghani (Islamic Azad U.,

Iran)

Multifunctional and Specific Interactions of MWCNT and Polymer As Decisive Parameters

For High Performance Of Nanocomposites Chougule HARISHKUMAR,

Ulrich Giese, Robert H. Schuster (DIK, Hannover, Germany)

In Situ µGISAXS Investigation of Gold Sputter Deposition onto Mesoporous Polymer

Templates. Matthias SCHWARTZKOPF, Adeline Buffet (DESY, Hamburg,

Germany), Volker Koerstgens (TU Muenchen), Kai Schlage, Jan Perlich,

Andre Rothkirch (DESY), Gunthard Benecke (DESY), Ezzeldin Metwalli (TU

Muenchen), Mottakin M. Abul-Kashem, Gerd Herzog (DESY), Peter Mueller-

Buschbaum (TU Muenchen), Ralf Roehlsberger, Rainer Gehrke, Stephan V. Roth

(DESY, Germany)

Tailoring Functional Polymer-Metal Nanocomposites Via Sputter Deposition

Stephan V. ROTH, Adeline Buffet, Mottakin Abul Kashem, Gunthard Benecke,

Rainer Gehrke, Gerd Herzog (DESY, Hamburg, Germany), Volker Koerstgens

(TU Muenchen), Jan Perlich (DESY), Monika Rawolle (TU Muenchen),

Ralf Roehlsberger, Andre Rothkirch, Kai Schlage, Matthias Schwartzkopf (DESY),

Peter Mueller-Buschbaum (TU Muenchen)

Enhancement Of Optical Birefringence In Anisotropic Nanocomposites Mediated By

Localized Surface Plasmon Resonance Shunsuke MURAI, Takuya Tsujiguchi,

Koji Fujita, Katsuhisa Tanaka (Kyoto U., Japan)

Modifying Polylactide and Polycarbonate Green Blends for Durable Applications

Yeh WANG, T.-F. Hung, S.M. Chiao (Tunghai U., Taichung) INVITED 25 min Friday

Effects Of Diameter And Stone-Wales Defect On The Functionalization Of Single-Wall-

Carbon Nanotubes By Amine Group Jun CHEN, Bessem Ben Doudou,

Alexandre Vivet, Gerard Nouet, M’hamed Ayachi (U. Caen, France)

Self-Organized Nanoporous Structure With Long Range Perfect Ordering

Qingfeng LIN, SiuFung Leung , Yunze Long, Zhiyong Fan (Hong Kong U.S.T.,

SAR, China)

Multifunctional and Specific Interactions of MWCNT And Polymer As Decisive

Parameters For High Performance Of Nanocomposites Harishkumar CHOUGULE,

Ulrich Giese, Robert H. Schuster (Hannover, Germany)

Fabrication of 2D Silicon Nano-Mold Based On Sidewall Pattern Technique

E. CHENG, Helin Zou, Chong Liu (Dalian U.T., China)

Rheological Characterization Of Chitosan/Nanowhiskers Composites

Hugo Lisboa, Joao P. Borges, Goncalo Pereira, Ana M. Ramos, Maria T. CIDADE

(U. Nova Lisboa, Portugal)

Nanostructured Dlc Coatings For Self-Assembly Applications

Enric BERTRAN, V.M. Freire, E.J. Cabrera, C. Corbella, S. Portal, E. Pascual,

J.L. Andújar (U. Barcelona, Spain)

ZrN/Hydroxyapatite Nanocomposite Coatings By Co-Sputtering Method

A. Joseph NATHANAEL, Jun Hee Lee, Sun Ig Hong Chungnam N.U., S. Korea)

The Influence Of Nano-Fillers On The Insulation Properties Of Epoxy Resin

Qi WANG, George Chen (U. Southampton, UK)

A Novel Nano-diamond Patterning Technique using Selective Nucleation and Growth

Weican XIAO, Xi Zhou, Sean Yost, Ramjee Balasubramanian, Sacharia Albin

(Old Dominion U., Norfolk, VA)

Nanomechanical Properties Of Polyurethane Nanocomposites Studied By Nanoindentation

Kamal YUSOH (U. Malaysia Pahang, Kuantan), M. Song (Loughborough U., UK)

Fabrication and Mechanical Properties of MWCNT Epoxy Composite

Chorng H. TWU (Tainan U.T., Tainan), Chen-Chi M. Ma, Sheng-Yen Wu,

Yuan-Li Huang, Hsi-Wen Tien, Shin-Yi Yang, Siu-Ming Yuen (Nat. Tsing Hua U.,

Hsinchu)

Preparation and Properties of GRAPHENE and its NANOCOMPOSITES

Chen-Chi M. MA, Shin-Yi Yang, Hsi-Wen Tien, Jen-Yu Wang, Shin-Ming Li,

Yu-Sheng Wang, Chia-Hong Liu, Shu-Han She, Wei-Ning Lin (Nat. Tsing Hua U.,

Hsinchu)

Possible Electronic Device Applications of Graphene Nanoribbons

Gengchiau LIANG (Nat. U. Singapore) INVITED 25 min Horizontal Suspension of Carbon Nanotubes

Jianmin MIAO, Jingyu Lu (Nanyang T.U., Singapore)

Carbon Nanotube / Poly(Vinyl Alcohol) Composites Formed By Spray Winding

Wei LIU, Yiping Qiu (Donghua U., Shanghai, China), Qingwen LI

(Suzhou Inst. Nano-Tech and Nano-Bionics, China)

A Prototype of Functional Nanowires-based 3D Biosensor Arrays

Peter X. FENG (U. Puerto Rico)

Effect Of Hot-Stretching Process On The Electrochemical Performance Of Sn at CNFs

Composite Anode Materials For Li-Ion Batteries Xin LI, Yunhua Yu,

Bingxue Liu,and Xiaoping Yang (Beijing U. Chem.Tech., China)

Preparation Of Polylactide Grafted Nano-Hydroxyapatite Via ATRP

Jiqing HE, Zenghui Wang, Fujian Xu, Yuanchao Li, Qing Cai, Xiaoping Yang

(Beijing U. Chem.Tech., China)

Preparation Of Fe3O4/Cap Core-Shell Nanoparticles Exhibiting Good Magnetism And

Bio-application Yu TENG, Qing Cai, Zhou Fang, Keyu Li, Xiaoping Yang

(Beijing U. Chem.Tech., China)

Study Of The Sn/C Nanofibers With Different Sn Contents For Anode Materials In

Lithium-Ion Batteries Keyu LI, Yunhua Yu, Yu Teng, Xin Li and Xiaoping Yang

(Beijing U. Chem.Tech., China)

Compressive Behavior Of Filament Wound Carbon Fiber/Epoxy Composite Tubes With

Different Winding Angles Gang CHEN, Gang Li, Jinming Zhu, Feng Wen,

Yunhua Yu, Xiaolong Jia, Xiaoping Yang (Beijing U. Chem.Tech., China)

Simulation Study Of A High Performance Metal-Oxide Carbon Nanotube Field Effect

Transistor Keka TALUKDAR, Apurba Krishna Mitra (Durgapur, India)

Synthesis And Characterisation Of Polymer-Stabilised AuNP

Haruna MUSA (Bayero U., Nigeria), Terence Cosgrove (U. Bristol, UK), Erol A. Hasan

(U. Liverpool, UK), Abdullahi A. Kogo (Ahmadu Bello U., Zaria, Nigeria), Hamza Abba

(Ahmadu Bello U.)

Effect Of Low-Aspect Ratio On The Enhanced Field-Emission Properties Of Densely-

Packed Ni-Nanowire Arrays Electrochemically Grown Through Porous Alumina

Membrane Arghya N. BANERJEE, Sang Woo Joo (Yeungnam U., S. Korea)

Fabrication of Transparent TiO2 Nanotubes-Film on FTO Glass By An Electrophoretic

Deposition Process Yulong LIAO, Wenxiu Que, Jin Zhang, Peng Zhong

(Xi’an Jiaotong U., China)

Cr Nanostructures Fabricated Based On Porous Anodic Alumina Membranes

Hany HAMDY (Beni-Suef U., Egypt), Sang-Wan Ryu (Chonnam N.U., Gwangju,

S. Korea), Mohamed Shaban (Ben-Seuf U.)

Strain Rate Effect On The Mechanical Properties Of Carbon Nanotube/Epoxy Composites

Yi-Ming JEN (Nat.Taiwan Ocean U., Keelung), Chien-Yang Huang, Pei-Ling Guo,

Yung-Chuan Wang (Chung Hua U., Hsinchu)

Properties Of Compression Moulding Starch –Nanoclay Biocomposites

Ahmad ZURAIDA, H. Anuar (IIUM, Kuala Lumpur, Malaysia)

Role Of Silicon Dioxide Filler On Dry Sliding Wear Behaviour Of Epoxy Nanocomposites

B. SURESHA, R.M. Devarajaiah (Nat.Inst.Engrg., Mysore, India), K.N. Shivakumar

(NCAT, Greensboro, NC), Kishore (Indian Inst.Sci., Bangalore), S. Seetharamu,

P. Sampathkumaran (Central Power Res.Inst., Bangalore)

Effect of Montmorillonite Nanoclay Filler on Surface Degradation Properties of Epoxy-

Based Nanocomposites N.M. RENUKAPPA, Rashmi, C. Ranganathaiah,

Siddaramaiah (Mysore, India)

Effect of the Activation Atmosphere on the Gold-Support Interaction in Au/Rutile

Catalysts Xim BOKHIMI, Rodolfo Zanella, Antonio Morales, Viridiana Maturano,

Carlos Angeles (UNAM, Mexico DF)

Facile Preparation And H2 Separation Of Multi-Walled Carbon Nanotube Buckypaper

Membranes With Tunable Pore Sizes Xiaoshuang YANG, Lixiang Yuan,

Andrew I. Minett, Andrew Harris (U. Sydney, Australia)

Semicrystalline Polyimide/Mwcnt Hybrid Nanocomposites:Structure, Dynamics, And

Properties Baode. ZHANG (Harbin I.T., China), V. A. Bershtein (Ioffe, Russia),

T.E. Sukhanova (ST. Petersburg, Russia), Wanchen. Zang (Jilin U., Changchun, China),

P.N. Yakushev (St. Petersburg), Yao. Li (Harbin I.T.), Chunhai. Chen (Jilin U.),

L.M. Egorova, I.V. Gofman , G. N. Gubanova, A. Y. Volkov, M. E. Vylegzhanina

(St. Petersburg)

Flow Induced Surface Attachment Of Gold Nanoparticles – An In Situ X-Ray Investigation

With Micro-Fluidic Cell Volker KOERSTGENS, Monika Rawolle (TU Muenchen,

Germany), Adeline Buffet, Gunthard Bennecke, Gerd Herzog, Jan Perlich,

Matthias Schwartzkopf (DESY, Hamburg, Germany), Martin Trebbin, Julian Thiele,

Sebastian With (U. Bayreuth, Germany), Frans J. de Jong, Michael Schlueter

(TU Hamburg-Harburg), Stephan V. Roth (DESY, Germany), Stefan Förster

(U. Bayreuth), Peter Müller-Buschbaum (TU Muenchen)

Combustion Synthesis Of (Α+Β)-Sialon Composites

Chun-Liang YEH (Feng Chia U., Taichung)

Nano-Sized Perovskite-Type Oxide / Carbon Nanotube Composites For An Oxygen-

Reducing Electrocatalyst Kohei MIYAZAKI, Tomokazu Fukutsuka, Takeshi Abe,

Zempachi Ogumi (Kyoto U., Japan)

Toughening Epoxy Thermosets And Their Carbon Fibre Reinforced Composites With

Electrospun Nanofibres Jin Zhang, Tong LIN, Xungai Wang (Deakin U., Geelong,

Australia)

Fluorescence of Variously Terminated Nanodiamond Particles

Irena KRATOCHVILOVA, A. Kovalenko, V. Rezacova, L. Fekete, F. Fendrych,

S. Zalis (Prague), V. Kocka (Charles U., Prague), M. Ledvina, P. Cígler, J. Stursa

(Prague), M. Nesládek (Diepenbeek, Belgium)

Processing Of Nanomaterials In The C-B-N System

Raj N. SINGH (U. Cincinnati, OH)

Mechanical Properties Of Spark Plasma Sintered Al2O3-ZrO2-TiO2 Composites

Ipek Akin, Filiz Sahin, Onuralp Yucel, Gultekin GOLLER (Istanbul T.U., Turkey)

Layered Oxide Nanowires For High-Energy Lithium ION Batteries

Liqiang MAI, Lin Xu, Xu Xu, Chunhua Han, Yanzhu Luo (Wuhan U.T., China)

Surface Plasmon Resonance Of Ag Nanocrystallines In Opaa Template

Shanshan Han, Xiuchun YANG, Yan Liu, Junwei Hou, Xiaoning Li, Wei Lu (Tongji U.,

Shanghai, China)

Nanoindentation Behavior of Naturally Layered Materials

Jianhong Zhang (Tsinghua U., China), Zhongxin Wei, Guoping Zhang

(Louisiana St.U.)

Formation Of Oxide Nanoclusters In Nanostructured Ferritic Alloys During Anisothermal

Heat Treatment Celine HIN (Mass Inst Tech, and UC Berkeley) , B.D. Wirth,

J.B. Neaton (UC Berkeley, Calif.) INVITED 25 min

Atomic Mobility, Freezing, And Superconductivity In Arrays Of Metallic Particles Within

Nanoporous Matrices Elena V. CHARNAYA (Nat. Cheng Kung U. and St.Petersburg

St.U.), Cheng Tien, M. K. Lee (Nat. Cheng Kung U.), D.Y. Xing (Nanjing U., China),

B.F. Borisov, Yu. A. Kumzerov (Ioffe Physico, St. Petersburg, Russia)

Influence of Surface Defects On Flexural Strength in ZrN-AlON Nanocomposites

Xiaojun Zhao, Hongqiang Ru (Northeastern U., Shenyang, China), D.L. Chen

(Ryerson U.,Toronto, Canada), N. Zhang, B. Liang (Shenyang U., China) POSTER

One-Step Synthesis of Al-doped ZnO Nanocrystalline Aggregates With Polydisperse And

High Specific Surface Area Jin ZHANG, Wenxiu Que, Yuan Yuan, Peng Zhong,

Yulong Liao (Xi’an Jiaotong U., China) POSTER

OXIDE COMPOSITES

Preparation of Bi-Superconducting Grains Included Seed-Crystals By Shock

Compaction Hiroshi KEZUKA (Tokyo U.T., Japan), Kazuhiro Endo (Kanazawa I.T.,

Japan), Mineo Itoh (Kinki U.), Hitoshi Matsumoto, Hiroaki Kishimura (Nat. Def. Acad.),

Tamio Endo (Mie U., Japan), Shunichi Arisawa (NIMS, Japan)

Dominant Role Of Grain Boundary Scattering On Carrier Transport Of Highly

Transparent Conductive Ga-Doped ZnO Films Tetsuya YAMAMOTO,

Huaping Song, Hisao Makino and Naoki Yamamoto (Koichi U.T., Japan)

Scratch Resistance Of Transparent Conductive Oxide Film On Polymer Substrate

Inguna STRAZDINA, Toms Torims (Riga T.U., Latvia), Edmunds Macevskis,

Viktors Kozlovs (Sidrabe Inc, Riga, Latvia)

Origin Of Feroomagnetism In Amorphous Euo-TiO2 Thin Films

Katsuhisa TANAKA, Koji Fujita, Yanhua Zong, Takahiro Kawamoto,

Hirofumi Akamatsu, Yoshiro Kususe, Shunsuke Murai (Kyoto U., Japan)

Fracture Strength Nanostructured Material Based On Dioxide Zirconium Monocrystalline

Maxim PUGACHEV, Gennadi Moskvitin, Askold Melshanov (Inst.Machines Sci,

Moscow, Russia)

Strength Nanostructured Material Based On Dioxide Zirconium Monocrystalline

Gennadi MOSKVITIN, Maxim Pugachev, Askold Melshanov, Sofia Alexeeva

(Inst.Machines Sci, Moscow, Russia)

Fabrication Of Intrinsic Josephson Junctions Stacks And Loosely Bound Atoms In

Superconducting Oxides Marco TRUCCATO, Angelo Agostino, Stefano Cagliero

(Torinto U., Italy), Holger Motzkau, Andreas Rydh, Vladimir Krasnov

(Stockholm U., Sweden) INVITED 25 min

Li1.6[MnM]1.6O4 (M=3d Transition Metal) Spinel Type Manganese Oxides Prepared By

Hydrothermal Method Kang-Sup CHUNG (Korea Inst. Geosci. & Min Res., Daejon,

S. Korea), Wonjin Moon, Kyoungshin Lee, Byungkyu Park (Korea Basic SCi Inst,

Suncheon), Sujin Pang (Chonbuk Nat. U.), Soon-Ki Jeong (Soonchunhyang U.),

Hyejin Seo, Daehee Won (Suncheon Nat. U.), Yangsoo Kim (Korea Basic Sci Inst.,

Suncheon) The Effect Of Metal Oxide-Carbon Support On Electrocatalysts For Fuel Cell Reactions

B. Ruiz-Camacho (U. Poitiers, France), M.A. Valenzuela (ESIQIE, Mexico),

Nicolas ALONSO-VANTE (U. Poitiers, France)

Growth of Catalyst-free SiC and SiC/SiO2 Nanowires using the Precursor of

Methyltrichlorosilane Yoo Youl CHOI, Doo Jin Choi (Yonsei U., Seoul, S. Korea)

Wed PM-Fri

Structural Degradation And Sensing Properties Of ZnO Nano Films

Xiaoyan PENG, J. Chu, M. Sajjad, P.X. Feng (U. Puerto Rico, San Juan)

Stimuli-Responsive Periodic Micro Structures On Oxide-Polymer Hybrid Films

Masahide TAKAHASHI, Yasuaki Tokudome (Osaka Prefecture U., Japan)

Rheological Properties Of Polyethylene-Copper Oxide Composites

` Tiam-Ting TEE, Tin-Sin Lee, Yew-Sing Chin (UTAR, Kuala Lumpur, Malaysia)

Metal-Oxide Based Supports For Electrocatalysis In Proton-Exchange Membrane Fuel

Cells Frederic MAILLARD, F. Micoud (Grenoble-INP, France), A. Bonnefont

(U. Strrasbourg, France), M. Chatenet (Grenoble-INP, France)

Stannic Oxide Nanopowders Via The Co-Precipitation Method

Mohamed .M. RASHAD, Adel A. Ismail, I. Osama, Ibrahim A.Ibrahim (CMRDI, Cairo,

Egypt), Abdel-Hakim T.Kandil (Helwan U., Cairo, Egypt)

Fabrication And Characterization Of Cu2O/TiO2 Composite Films For Solar Cell

Applications Ayib Rosdi ZAINUN (UiTM, UMP, Malaysia, and Nagoya I.T., Japan),

Tomoya Sakamoto (Nagoya I.T., Japan), Uzer Mohd Noor, Mohamad Rusop

(U.Tek MARA, UiTM, Malaysia), Masaya Ichimura (Nagoya I.T.)

Microstructure of Magnetron Sputtered ZnO Films on Glass Substrate

Shiuh-Chuan HER, Tsung-Chi Chi (Yuan Ze Univ., Chung Li)

Oxidation Of Ni3Al-(Cr, Zr, Mo, B) Alloy Between 900 And 1100°C In Air

Seul-Ki KIM, Min-Jung Kim, Sang-Hwan Bak, Dong-Bok Lee (Sungkyunkwan U.,

Suwon, S. Korea)

TEXTILE COMPOSITES (Natural Fiber/resin)

Effect Of Various Surface Treatments For Jute Fiber Reinforced Composites

Jeong-myung BYEON, Jin-woo Kim, Gi-beop Nam, Jung-il Song (Changwon N.U.,

S. Korea)

Mechanical Properties of Carbon Fabric-Phenolic Resin Composite Using Carbon

Nanotubes Yi-qi WANG, Joon-hyung Byun, Cheon Won, Zhi-peng Hui, Jung-il Song

(Changwon N.U., S. Korea)

Rubber Toughening Of Polylactic Acid

Mohd BIJARIMI, A. Sahrim, R. Rasid (U.Kebangsaan, Malaysia), H. Zulkafli

(U. Malaysia Pahang)

Rubber Toughened Polyester Nanocomposite – Mechanical and Morphological Properties

N.N. BONNIA (U.T. MARA, Malaysia) S. Ahmad (U. Kebangsaan, Malaysia), S. Surip,

S.Y. Syed Yahya, M. Mahat.M (U.T. MARA)

Nanoindentation Characteristic of Nanoclay/ Rubber Toughened-UPE Nanocomposite.

S.N SURIP (U.T. MARA, Shah Alam, Malaysia), Z.Y Zhang, H.N. Dhakal (U.

Portsmouth, UK), N.N. Bonnia (U.T. MARA)

Properties Enhancement of PLA-Natural Fibre Composites Using An Ethylene Copolymer

Maryam Talimi, Ghaus RIZVI (Univ. Ontario Inst. Tech., Canada)

A Simple Constitutive Model For Plain-Woven C/SiC Composites

Jun LI, Guiqiong Jiao, BoWang,ChengpengYang, Shifei Liang (Northwestern Polytech.

U., Xi’an, China)

Prediction Of Kink Band Formation In 3D Textile Glass Fiber Composites Using A Multi-

Scale Modeling Strategy Dianyun ZHANG, Anthony M. Waas (U. Michigan),

Chian-Fong Yen, Seth Ghiorse (US Army. Aberdeen P.G., MD)

Modeling The Stress-Strain Behavior Of Triaxially Braided Composites

Xinran XIAO, Christopher Cater (Michigan St.U., East Lansing)

Effect Of Surface Modification Of Kevlar Stitch Threads On Interfacial Hydrothermal

Properties Of Carbon Fiber Reinforced Epoxy Stitched Composites

Tao AI (Chang'an U., Xi'an, China), Rumin Wang (Northwestern Poly U., Xi'an, China),

Jie Deng (Aerospace Comp. Mat. Res. Inst., Xi'an, China)

Nanophase Treatment Of Natural Fiber For Fiber Reinforced Polymer Composites

Sheldon Q. Shi, Jinshu Shi, Kaiwen Liang, Jinwu WANG (Mississippi St.U., Starkville)

Prediction Of Glass Leno Fabrics Porosity And Strength

Jirí MILITKY (TU Liberec, Czech Rep.), Jaroslav Dvorak (Res Inst.Textile Machinery,

Liberec, Czech Rep.), Dana Kremenakova, Brigita Kolcavova-Sirkova (TU Liberec)

Electromagnetic Shielding Of Hybrid Weaves

Veronika SAFAROVA, Jiri. Militky (TU Liberec, Czech Rep.)

Preparation Of Nanocellulosic Powder From Jute Fibres By Ball Milling Process

Vijay BAHETI, Miroslava Marsalkova, Jiri Militky (T.U. Liberec, Czech Rep.)

Factors Affecting the Tearing Resistance of Textile Structures

Patricia DOLEZ, Ennouri Triki and Toan Vu-Khanh (Ecole Tech Sup, Montreal, Canada)

Experimental Investigations Of The Impact Behavior Of A Warp Interlock Fabric

Cuong HA-MINH, François Boussu, Jan Van Roey, Toufik Kanit, David Crépin,

Abdellatif Imad (U. Lille Nord de France) Generalized Geometric Model Of 3D Woven Preforms From Spun Yarns

Abdel-Fattah M. SEYAM, Mehmet E. Ince (N. Carolina St. U., Raleigh)

Compatibilizing Effect Of Epoxy On The Structure And Properties of PET/PA6 Blend

Fibers Jing ZHOU, ByungGil Min, JuYeon Kim (Kumoh Nat. I.T., Gumi, S. Korea)

Research On Pultrusion Of Polybenzoxazine Resin Matrix Z-Pins

Xiangyang ZHANG, Yong Li, Jun Xiao (NUAA, Nanjing, China)

Study On Test Method For Shear Properties Of Minisize Rod―Z-Pin

Ning Li, J. XIAO (NUAA, Nanjing, China)

Effects Of Ultraviolet Aging On The Mechanical Properties Of Hemp Fibers

Shuai JIN, Xiaolu Gong (U.T. Troyes, France)

Mechanical Properties Of Unidirectional Jute Fiber Reinforced Poly(Butylene Succinate)

Biodegradable Composites Huu Nam TRAN, Shinji Ogihara (Tokyo U. Sci., Japan)

Water Permeation In Polylactide And Polylactide/Montmorillonite Composites

An DU, Donghun Koo, Mary Ziegler, Richard A. Cairncross (Drexel U., PA)

Advanced Application Of Natural Fibres In High Performance Automotive Composite

Structures V.R Soroush, Hessam GHASEMNEJAD, D.R. Marchant, A. Aboutorabi

(Kingston U., London, UK)

Chemically Modified Glass and Cotton Fibres Reinforced Polyester Resins

A.A. KOGO, O.K. Sunmonu, E.G. Kolawole (Ahmadu Bello U., Zaria, Nigeria)

Extraction, Fabrication and Evaluation of Sansevieria Roxburghiana Fiber

M. Kanimozhi ARUN, N. Vasugi Raaja (A. Univ. for Women, Tamilnadu, India) Effect Of Coupling Agent On The Interfacial Properties Of 3d Ramie/Polypropylene Composites

Yang SHEN,Jianmeng Zhao, Nanting Zhou, Qian Zhang, Xiaomeng Fang, Yiping Qiu,

Hui Wang (Donghua U., Shanghai, China)

Shape Memory Effect and Thermomechanical Properties Shape Memory Polymer Fabric

Composite in Tension Mode M. Ahmad, D. Singh, M. Miraftab, J.K. LUO

(U. Bolton, UK)