ic36240v1_cmdlineref

4
Asanté IntraCore 36000 Series Command Reference 1 IntraCore ® 36000 Series Command Line Reference Command Mode Overview Privileged Top Mode: Switch# Global Configuration Mode: Switch(config)# Interface Configuration Mode: Switch(config-if)# IP ACL Configuration Mode: Switch(ACL-NAME)# MAC ACL Configuration Mode: Switch(ACL-NAME)# Global Configuration Mode Switch(config)# Configuration prompt ? List commands access-list Add an access list entry authentication Authentication method boot Modify system boot parameters bridge-ext Bridge Extension clock Clock dot1x IEEE 802.1x configuration define Create a definition dot1x IEEE 802.1x configuration enable Modify enable password parameters end Exit from configuration mode exit Exit from global configuration mode help Description of the interactive help system hostname Set system's network name interface Into the privileged interface configuration mode ip Global IP configuration subcommands jumbo Specify jumbo status line Into the privileged line configuration mode logging Modify message logging facilities mac-address-table Set configuration of the address table management Specify management IP filter map Map priority no Negate a command or set its defaults prompt Set system’s prompt queue Assign priority queues rate-limit Configure rate-limit shutdown Shutdown the selected interface spanning-tree Specify spanning tree configuration speed-duplex Configure speed and duplex operation switchport Configure switching mode characteristics Privileged Top Mode Switch# Privileged prompt ? List commands calendar Date information clear Reset functions configure Enter configuration mode copy Copy from one file to another delete Delete a file dir List files on filesystem disable Turn off privileged disconnect Disconnect dot1x Configure 802.1x exit Exit from privileged EXEC mode help Description of the interactive help system ip Internet protocol ping Send echo messages quit Exit a CLI session reload Halt and perform a warm restart show Show information spanning-tree Specify spanning tree configuration whichboot Determine boot files

Upload: nnaji-maurice

Post on 03-Oct-2015

3 views

Category:

Documents


0 download

DESCRIPTION

command line

TRANSCRIPT

  • Asant IntraCore 36000 Series Command Reference 1

    IntraCore 36000 Series

    Command Line Reference

    Command Mode Overview

    Privileged Top Mode: Switch#Global Configuration Mode: Switch(config)#

    Interface Configuration Mode: Switch(config-if)#IP ACL Configuration Mode: Switch(ACL-NAME)#MAC ACL Configuration Mode: Switch(ACL-NAME)#

    Global Configuration Mode

    Switch(config)# Configuration prompt? List commandsaccess-list Add an access list entryauthentication Authentication methodboot Modify system boot parametersbridge-ext Bridge Extensionclock Clockdot1x IEEE 802.1x configurationdefine Create a definitiondot1x IEEE 802.1x configurationenable Modify enable password parametersend Exit from configuration modeexit Exit from global configuration modehelp Description of the interactive help systemhostname Set system's network nameinterface Into the privileged interface configuration modeip Global IP configuration subcommandsjumbo Specify jumbo statusline Into the privileged line configuration modelogging Modify message logging facilitiesmac-address-table Set configuration of the address tablemanagement Specify management IP filtermap Map priorityno Negate a command or set its defaultsprompt Set systems prompt

    queue Assign priority queuesrate-limit Configure rate-limitshutdown Shutdown the selected interfacespanning-tree Specify spanning tree configurationspeed-duplex Configure speed and duplex operationswitchport Configure switching mode characteristics

    Privileged Top Mode

    Switch# Privileged prompt? List commandscalendar Date informationclear Reset functionsconfigure Enter configuration modecopy Copy from one file to anotherdelete Delete a filedir List files on filesystemdisable Turn off privilegeddisconnect Disconnectdot1x Configure 802.1xexit Exit from privileged EXEC modehelp Description of the interactive help systemip Internet protocolping Send echo messagesquit Exit a CLI sessionreload Halt and perform a warm restartshow Show informationspanning-tree Specify spanning tree configurationwhichboot Determine boot files

  • Asant IntraCore 36000 Series Command Reference 2

    VLAN Configuration Mode

    Switch(config-if)# VLAN prompt? List commandsend Exit from configure modeexit Exit from interface configure modehelp Description of the interactive help systeminterface Into the privileged interface configuration modeip Internet protocolno Negate a command or set its defaultspvlan Configure private VLANqueue Assign priority queuespriority-precedence Set priority source precedenceradius-server Login by radius serversnmp-server Modify SNMP parameterssntp SNTPspanning-tree Enable spanning treetacacs-server Login by tacacs serverusername Establish user name authenticationvlan Switch VLAN virtual Interface

    Port Interface Configuration Mode

    Switch (config-if)# Port interface prompt? List commandscapabilities Configure the capabilitiesdescription Add description to the port-channelend Exit from the interface configuration modeexit Exit from port-channel configure modeflowcontrol Enable flowcontrolgarp GARP propertyhelp Description of the interactive help systeminterface Into the privileged interface configuration modelacp LACP configurationmap Map prioritynegotiation Negotiationno Negate a command or set its defaultsprotocol-vlan Protocol-vlan interface configuration commands

    Ethernet Interface Configuration Mode

    Switch(config-if)# Ethernet prompt? List commandscapabilities Configure the capabilitieschannel-group Specify the trunk id to groupcombo-forced-mode Specify combo force modedescription Interface specific descriptiondot1x Configure 802.1xend Exit from configure modeexit Exit from interface configure modeflowcontrol Enable flow controlgarp Garp propertyhelp Description of the interactive help systeminterface Into the privileged interface configuration modeip Internet protocollacp Configure lacp statusmac Configure MAC access groupmap Map prioritymatch Matchnegotiation Negotiationno Negate a command or set its defaultsport Configure the characteristics of the portprotocol-vlan Protocol-vlan interface configuration commandsqueue Assign priority queuesrate-limit Config rate-limitshutdown Shutdown the selected interfacespanning-tree Specify spanning tree configurationspeed-duplex Configure speed and duplex operationswitchport Configure switching mode characteristics

  • Asant IntraCore 36000 Series Command Reference 3

    Access-List IP Standard Configuration Mode

    Switch(config-std-acl)# Prompt? List commandsdeny Specify packets to dropend Exit from configure modeexit Exit from privilege EXEC modehelp Description of the interactive help systemno Negate a command or set its defaultspermit Specify packets to permit

    Access-List IP Extended Configuration Mode

    Switch(config-ext-acl)# Prompt? List commandsdeny Specify packets to dropend Exit from configure modeexit Exit from privilege EXEC modehelp Description of the interactive help systemno Negate a command or set its defaultspermit Specify packets to permit

    Access-List IP Mask Configuration Mode

    Switch(config-ip-mask-acl)# Prompt? List commandsend Exit from configure modeexit Exit from the EXEChelp Description of the interactive help systemmask Specify IP maskno Negate a command or set its defaults

    Line Configuration Mode

    Switch(config-line)# Configuration promptlogin Enables password checking at logindatabits Sets the number of data bits per characterexec-timeout Sets the amount of time the system waitsparity Defines the generation of a parity bitpassword Sets the passwordpassword-thresh Sets the password intrusion thresholdsilent-time Sets the time the console is unavailablespeed Sets the terminal baud ratestopbits Number of stopbits per byte

  • Asant IntraCore 36000 Series Command Reference 4

    Access-List MAC Mask Configuration Mode

    Switch(config-mac-mask-acl)#Prompt? List commandsend Exit from configure modeexit Exit from the EXEChelp Description of the interactive help systemmask Specify MAC maskno Negate a command or set its defaults

    Access-List MAC Configuration Mode

    Switch(config-mac-acl)# Prompt? List commandsdeny Specify packets to dropend Exit from configure modeexit Exit from privilege EXEC modehelp Description of the interactive help systemno Negate a command or set its defaultspermit Specify packets to permit

    Copyright 2004 Asant Technologies, Inc. All rights reserved. No part of this document, or any associated artwork, product design, or design concept may be copied or reproduced in whole or in part by anymeans without the express written consent of Asant Technologies, Inc. Asant and IntraCore are registered trademarks and the Asant logo, AsantCare, Auto-Uplink, and IntraCare are trademarks of AsantTechnologies, Inc. All other brand names or product names are trademarks or registered trademarks of their respective holders. All features and specifications are subject to change without prior notice.

    Rev. A 06/09/04