ic1000 v2.7 v2.7.pdf · isystem ag isystem usa, llc isystem ab isystem s.r.l. isystem ltd....
TRANSCRIPT
The iC1000 PowerEmulator is the ultimatetool for all 8-bit microcontroller based embed-ded applications. It incorporates major inno-vation in a compact package, covering thewidest variety of development environments.
The iC1000 provides embedded system debugwith comprehensive, real-time high-speed in-circuit emulation up to 50ns target memoryaccess time using iSYSTEM's uniquePowerPOD technology.
The new "swap the Pod" technology preservesthe investment in the iC1000 unit while provi-ding adaptability to a wide range of targetMCUs and debug methodologies.
TM
TM
The iC1000 is driven with winIDEA, anintegrated development environment.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Overlay memory 1MB
HW breakpoints 1M
Real-time in-circuit emulation up to 50ns
Real-time Watch (MC specific)
4- or 8-bit data bus / 32-bit address bus
Multiple voltage support (3V & 5V)
Background INT/DMA- Mode
Waveform generator
Integrated PowerTrace
Variable clock speed
High speed communication (USB/10BaseT)
High-integration SMD technology
Power supply 90 - 240 V AC
Compact size
Driven with winIDEAIntegrated Development Environment
Source level debugging for C and ASM
TM
iC1000 PowerEmulator Features:
iC1000 - the flexible emulator
The iC1000 PowerEmulator is the latest in along line of universal development tools fromiSYSTEM. Utilizing SMD technology andhighly integrated FPGAs, the iC1000 packsplenty of powerful innovations in a small,compact package. It is the ideal solution formobile applications and desktop use as well.
w w w. i s y s t e m . c o mV2.7
PowerEmulatorThe universal 8-bit Development System
iC1000
pointing. In conjunction with the additional LogicPODthe PowerTrace can be used as a 32 channels logicanalyzer.
The iC1000 PowerEmulator is a universal andadaptable emulator solution for high speed 4- and 8-bitapplications. By swapping the PowerPOD, the systemis reconfigured for an alternate target microcontroller,preserving your investment in the base iC1000 system.Likewise, the software interface to the iC1000 is alsoadaptable. The winIDEA integrated developmentenvironment includes project management, integrationof all popular compilers/assembers, make & build, anddebugger. One easy-to-use interface for all yourembedded development needs.
The iC1000 currently supports the following micro-controller families by PowerPODs supporting in-circuitemulation. Check our web site for the most recentinformation on device support.
IC1000 PowerEmulator and winIDEA -the adaptable team
iC1000 Device Support
68HC0568HC08680968HC11
8051802518085C500
ST7Z80Z180
V2.5
For its power supply, the iC1000 accepts direct input ofDC 5V, or AC power from 90V - 240V with the suppliedexternal auto sensing power supply. High speedcommunication to the host PC is essential for effectivedevelopment. The iC1000 is equipped with a high-speed RS232C serial interface (COM) communicatingat 115kbps and a very fast parallel interface (LPT)supporting standard, bi-directional and EPP/EPCinterface configuration. An Universal Serial Bus (USB)interface operating at 12MHz and an Ethernet IEEE802.3 interface (RJ45 / 10Mbps) supporting the TCP/IPprotocol is also available. To maximize flexibility incommunicating with the target system, the iC1000includes an universal POD interface, which connectsthe iC1000 with any supported 4- and 8-bit PowerPODfor full in-circuit emulation.
The iC1000 PowerEmulator provides real-time high-speed in-circuit emulation up to 50 ns target memoryaccess time. The dramatic increase in embeddedsystems bus speeds has created new challenges forreal-time emulation. iSYSTEM has met the challengeby developing iC1000 based on latest FPGA technolo-gy, which brings the emulation hardware much closertogether. All critical functions such as overlay memory,break, trace and trigger logic reside in a few high-speedRAM-based FPGAs at the iC1000. This very highintegration assures optimized timings for all necessarytransactions. The PowerPOD is connected to theiC1000 emulator by two high density flat cables cleanand simple. Additional features like the 8 channels waveform generator, the programmable clock generator, thecall stack monitor and Bank switching support make theemulator complete.
The PowerTrace is part of the iC1000.The PowerAnalyzer has a 16K*128bit trace buffer.Equipped with high-speed RAM the trace collectsinformation about the target MCU in real-time. It givesthe user the powerful possibility to review the programflow under certain conditions in real-time and withoutany influence on the target microcontroller to trackdown hardware and/or software based problems fast.In addition the PowerTrace can be used for programprofiling, code/data coverage and very complex break
TM
PowerPOD - for high-speedin-circuit emulation
iC1000 PowerTrace
TM
PowerEmulatorThe universal 8-bit Development System
iC1000
w w w. i s y s t e m . c o m
iSYSTEM AG iSYSTEM USA, LLC iSYSTEM AB iSYSTEM S.r.L. iSYSTEM Ltd.
Schwabhausen, GermanyTel. +49(8138)6971-50e-mail: [email protected]
San Diego, California, USATel. +1(888)543-5300e-mail: [email protected]
Vellinge, SwedenTel. +46(40)459570e-mail: [email protected]
Gallarate (VA), ItalyTel. +39(0331)775119e-mail: [email protected]
Wiltshire, UKTel. +44(0845)1249694e-mail: [email protected]