ibc chapter 7 - home | boston society of architects codes-160518-c3... · 1 ibc chapter 7 313...
TRANSCRIPT
1
IBC Chapter 7
313 Congress Street Boston, MA 02210 617.330.9390 617.330.9383 fax
www.c3boston.com
Based on the 8th & 9th Editions of 780 CMR:
2009 & 2015 IBC with MA Amendments
For
Boston Society of Architects
May 18, 2016
Presented by Doug Anderson
Commercial Construction Consulting is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to CES Records for AIA members. Certificates of Completion for non-AIA members are available upon request.
This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation.
Best Practice
2
Learning ObjectivesLearn the topics covered in Chapter 7 of the Massachusetts Building Code
Understand exterior wall requirements, interior wall types, when to use them, and how they are constructed
Requirements for smoke and/or fire dampers, opening protectives, and smoke and draft control doors
Archaic Construction
Illustrations from the 2009 IBC Commentary unless otherwise noted
Chapter 7: Fire and Smoke Protection Features
� Primary and Secondary Frame members
� Exterior Walls
� Interior Walls
� Horizontal Assemblies
� Penetrations
� Fire-resistant Joint Systems
� Opening Protectives
� Duct and Air Transfer Openings
� Concealed Spaces
� Plaster
� Thermal and Sound Insulating Materials
� Prescriptive Fire Resistance
� Calculated Fire Resistance
3
Primary and Secondary Frame MembersPrimary Structural Frame
� Columns
� Beams and Girders connected to columns
� Floor and Roof construction connected to columns
� Bracing elements critical to vertical support
� Individual encasement required on all sides
Secondary Structural Members
� Beams and girders not directly connected to the columns
� Floor construction not connected directly to columns
� Other bracing members
� Individual encasement on all sides, or within a membrane assembly
Exterior Walls
Fireresistance Rating
� Higher of Construction Type or Fire Separation Distance
� FSD 10 ft or less, rated from both sides
� FSD more than 10 ft, inside only
Openings
� Limited by Fire Separation Distance
4
Interior Walls
Wall Types:
� Fire Walls/ Party Walls
� Fire Barriers
� Shaft Enclosures
� Fire Partitions
� Fire Partitions (Corridors)
� Smoke Barriers
� Smoke Partitions
� Horizontal Assemblies
� None of the Above
Horizontal Assemblies
Floor/Ceiling and Roof/Ceiling Assemblies
� Slab
� Membrane
5
Penetrations
Walls
Floor/Ceiling Assemblies
Fire-resistant Joint Systems
6
Opening Protectives
Fire Doors
� 2 Hr Fire Wall or Fire Barrier: 90 Minute
� 1 Hr Fire Barrier, shafts: 60 minute
� 1 Hr Fire Barrier, others (Use Group Separation): 45 minute
� 1 Hr or 30 minutes Fire Partitions, Corridors: 20 minute
� 1 Hr Fire Partitions, Others: 45 minute
� 1 Hr Smoke Barriers: 20 minute
� 3 Hr Fire Wall: 2@ 90 minute or 1@ 3 hr
Smoke and Draft Control
� Corridors and Smoke Barriers
Duct and Air Transfer Openings
� Fire Walls/ Party Walls: Fire Damper
� Fire Barriers: Fire Damper
� Horizontal Exits: Fire/Smoke
� Shafts: Fire/Smoke
� Subduct Exceptions
� Fire Partitions: Fire or Smoke
� Fire not required if fully sprinklered and duct is protected as a penetration
� Smoke not required for separate common/dwelling systems, or for smoke control systems
� Smoke Barriers, Smoke Partitions: Smoke Damper
� Horizontal Assemblies: Fire Damper (2 or 3 stories), or shaft
7
Concealed Spaces
Required for Combustible Construction Only
Fire Blocking
Draftstopping
Thermal and Sound Insulating Materials
Fibreboard: Chapter 23
Foam Plastic: Chapter 26
Concealed
� Flame Spread 25, Smoke Develop 450� Exception: In Types III, IV and V, covered backings when in substantial
contact with wall or ceiling surface
Exposed
� Flame Spread 25, Smoke Develop 450
� Intumescent coatings
8
Prescriptive Fire Resistance
Tables in 721
Archaic Construction
From Principles of Tile Engineering, H.C. Plummer& E.F. Wanner, ©1947
Calculated Fire Resistance
9
Putting It All Together
General Guidelines
Fire resistance rated walls must be tested in accordance with ASTM E 119 or UL 263.
Testing requirements found in 780 CMR 703
If you put an opening, door, or penetrate a FRR wall, it also needs to meet certain requirements.
10
Wall Types:
� Fire Walls/ Party Walls
� Fire Barriers
� Shaft Enclosures
� Fire Partitions
� Fire Partitions (Corridors)
� Smoke Barriers
� Smoke Partitions
� Horizontal Assemblies
� None of the Above
780 CMR 7.00: Supplemental Information
Fire Wall
Fire-resistance ratedProtected openingsContinuous from foundation to roof, Allows for structural collapse on either side without collapse of the fire wallProtected openings permittedEX: used to separate two buildings
Party Walls� A type of fire wall that separates two buildings on
a party line� No penetrations or openings allowed
11
Fire Barriers
Fire resistance ratedExtends slab to slabProtected openingsLimited penetrations of membraneVertical or horizontal (if horizontal, refer to horizontal assemblies)Locations: area of refuge separation, separate occupancies in a mixed use building (if required), exit enclosures, exit passageways, atrium separation
Example of Continuity:Fire Barrier
From top of floor/ceiling assembly to underside of deck above:
12
Shaft Enclosures
Enclosed space extends through one or more stories connecting vertical openingsConstructed as fire barriersEX: interior stairways, elevator hoistways, mechanical shafts
Fire Partitions (incl Corridors)
Fire-resistance ratedExtends slab to slab or slab to underside of floor/ceiling membraneEX: Typically used for elevator lobby separation, tenant spaces in a covered mall, dwelling units and guestrooms
Fire Partitions (Corridors) � Fire-resistance rated in accordance with 1016.0� Not interrupted by intervening rooms� Extends slab to slab or slab to underside of floor/ceiling
membrane� EX: Enclose an exit access corridor
13
Example of Continuity:Fire Partition
From top of floor/ ceiling assembly to underside of floor assembly above:
Smoke Barrier
1 hr fire-resistance ratedExtends wall to wall and slab to slabEX: Usually used in Group I-2 and I-3 to evacuate occupants horizontally to another smoke compartment. Can be used in a smoke control system or part of an accessible means of egress systemFirefighter lobby in new high rise buildings >120 feet (>70 feet in MA)
14
Smoke Partitions
No fire-resistance ratingResistant to the passage of smokeSlab to slabSpecific opening sealing requirements (710.5).EX: Corridor walls in a Group I-2 (Hospital, nursing home, mental hospital, detox facility)In lieu of a fire partition for elevator lobby
Horizontal Assemblies
Floor and roof assembliesContinuous without openings, penetrations or joints except as permittedMay or may not have a FRRMay also be required to be constructed as a smoke barrier
15
Example of Continuity:Horizontal Assembly
From top of floor/ceiling assembly to underside of deck above:
Construction TypeType I – rated construction, limited combustibles
allowed in building
Type II – may be unrated (Type IIB) or rated
construction (Type IIA), limited combustibles allowed in building
Type III – typical masonry construction with rated
exterior walls, rated (IIIA) or non rated floors (IIIB), combustible construction allowed in building
Type IV – heavy timber
Type V – everything’s unrated (Type VB) or
everything’s 1 hr rated (Type VA), combustible construction allowed in building
16
Construction Type Req’s
Exterior walls
Height and Area Limits
Single and Mixed Use buildings
� Mixed Use: provide separation in order to create larger building (use table on following page)
� Single Use: FRR construction could be used to create a larger building (can be considered “buildings on the same lot” per 780 CMR 501.2)
� Exterior walls don’t necessarily have to be FRR walls
17
Use Group Separation
Accessory Rooms
18
Dwelling Unit/ Sleeping Rooms
Fire partitions for vertical walls
Fire rated horizontal assemblies
In Types IIB, IIIB and VB, 30 minute
Other types, 1 hr
Corridors
Rated vs. Not Rated
19
Corridors as egress componentsCan provide a 1 hour FRR corridor connecting the exit enclosures to measure travel distance in lieu of exit separation requirements
½ D for nonsprinkleredbuildings and 1/3 D for sprinkleredbuildings
ExitsExit Passageways – walls are fire barriers
Stairways – shaft walls are fire barriers
20
Marking and Identification
Fire walls, fire barriers, fire partitions, smoke barriers and smoke partitions must be identified with signs or stenciling (Sec 703.6)
� Located at accessible floor, floor/ceiling or attic spaces;
� Repeated every 30 feet; and
� Min ½” lettering. Example: “Smoke barrier, protect all openings”
Thank you for your time!
Questions?
Doug Anderson
This concludes The American Institute of Architects Continuing Education Systems Program
313 Congress Street Boston, MA 02210 617.330.9390 617.330.9383 fax
www.c3boston.com
21
C3 Services:
313 Congress Street Boston, MA 02210 617.330.9390 617.330.9383 fax
www.c3boston.com
MEP / FP Engineering
Due Diligence
Construction Management
Owner’s Representatives
Development Advisory
Code Advisory
Building Envelope