2. To: (Receiving Organization) Distribution 5. Proj ./Prog./Dept.iDiv. :

Spent Nuclear Fuel Proiect 8. Originator Remarks: NIA

3. From: (Originating Organization) SNF Project 6. Design Authority1 Design AgenWog.

C. Van Katwiik Engr.:

1 I . Receiver Remarks: 1 IA. Design Baseline Document? [I Yes [XI No

(A) Item NO

1

(B) DocummtKJmwng No (C) (D) (E) Title or h p t r o n of Data Shgf Rev Trammined NO NO

SNF-3930 0 K r h e Flow lndtcatarlAlam - Local Helium Flow Indication and High Flow Alarm mule SCHe Purge System

4. Related EDT No.: NIA

7. Purchase Order No.:

NIA 9. EquipKomponent No.:

NIA 10. System/Bldg./Facility:

Spent Nuclear Facility 12. Major Assm. Dwg. No.:

NIA 13. Permit/Permit Application No.:

NIA 14. Required Response Date:

NIA

Approval Designator (F) E, S, Q, D or NIA (see WHCCM-3-5, See 12.7)

Reason for Transmittal (G) Disposition (H) & (1) I Approval 4.Review I . Approved 4. Reviewed no/wmment 2 . Release 5 Post-Review 2. Approved wlwmment 5 Reviewed wlwmment 3 Infomarion 6 . DiSf (Receipt Acknow. Required) 3 Disapproved wlwmment 6 . Receipt acknowledged

(C) Rea-

21. DOEAPPROVAL(ifrequired) Cwl. No

Approved wlwmmenls [I Disapproved wlwmmms

n Appmved

(H) (I) Name (K) Signature (L) Dale (M) MSlN (C) (H) (I) Name (K) S i p l u r e (L) Date (M) MSlN Dirp Rea- Disp.

BO-74W-172-1

% SNF-3930, Rev. 0

Krohne Flow Indicator/Alarm - Local Helium Flow Indication and High Flow Alarm in the SCHe Purge System

Carl Van Katwijk Numatec Hanford Co, Richland, WA 99352 US. Department of Energy Contract DE-AC06-96RL13200

EDTIECN: 626219 OrgCode: 2G300 B&R Code: 39EW40400

UC: 620 Charge Code: 105559/AOOO Total Pages: I 3

Key Words: Flow indicator - Alarms

Abstract: Krohne Flow IndicatorIAlarm local Helium Flow lndication and High Flow Alarm in the SCHe Purge System CGI-SNF-D- 13-P5-034

TRADEMARK DISCLAIMER. Reference herein to any specific mmmerclal product, process, or service by hade mme, wdemark, manufachlrer, or otherwise, d m not necessarily wnstitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof or itF mnhactors or subconhactors.

Printed in the United States of America. To obtain mpies of this document, wntact: Document Control Services, P.O. Box 950, Mailstop H6-08, Richland WA 99352, Phone (509) 372-2420 Fax (509) 3764989.

ApprovM for Public Release A-6400-073 (01197) GEF321

Commercial Grade Item Upgrade Dedication Form ECNNo. NA Titlc:

CGI No. CGI-SNF-D-13-Ps-034

INDICATION AND HIGH FLOW ALARM IN TEE S C B PURGE SYSTEM

FLOW I N D I c A T O w W - LOCAL H E L m FLOW

1 Manufachrrer: Item No.: NA

Rcv.No. 0 5NF - 37 30

Page 1 of 12

Mtg. ParVModel No.:

End Use Deswiption:

Supplier's PN:

FI/FSH-5.10. 5.29. 5.49. 5.52.5.69. 5.72.5.76.5.77. 5.78.5.79 Manufacturer'8 ParVModel No.: DK 37/M R K125 W/120 VAC RELAY AND W/O NEEDLE VALVE

P5. Rev. 2

Equipment Slpplier (if diimt fm manufacturer): TED

~ ~~~

Past P.O. No.: NA

Equip. Supplier's Part No.: NA

Conponent Dasaiption: These flow Indiceton/dans me located in the 15 psig section of the SCHe supply lines eftw the 15 psig pressure reducing valves end before the second pressure reducing vdves set to 7 and to 2 psig. The flow indicetors monitor the flow going to the SCHe puge lines.

3. Recommendad Rocurement Strategy (COMdnate with project CGI inkiface Engineer or BTR): NA

1. PuesGon #1: Is the Item Wect to design M SPecificaSon requinments that are uflque to nuclear facilities M activities? [ ] YES(theltemisnotmmdommercialgrade) [ X I NO(continue)

12/16/98

Commercial Grade Item Upgrade Dedication Form ECNNo. NA COI No. CGIShT-D-13-P5-034 Tis: KROHNE FLOW INDICATOWALARM - LOCAL HELIUM FLOW

INDICATION AND HIGH FLOW ALARM IN THE SCHe PURGE SYSTEM

5 NF- 3ci3d Rev. No. 0

Page 2 of 12

2. Question W: Is the Item used in applicab'ons other than nudear faalities or activities? [ ] NO (the item is not cornmemid grade) [ X I YES(continue)

cahlC@

[ ] NO (the Item is not COmmerCial grade) [ X I YES(continue)

3. Question #3: Is the Item ordered from manufacturerlsupplier on the basis or specifications set forvl in the manufacturers

[ X I Itam is baing Purdgsedfrom a non ESLmanufmturw supplier as comnercial grade tobe used in a Safely Class

[ 1

I I

Item is being purchased from a rnm ESL manufacturer srpplier as comnercial grads to be used in a Safely Significant application. Item was wrchased from a non ESL manufactwer suwlier as mmercial orade to be used in a Safetv Class

~

I 1 Item was purchased from a rnm ESL manufacturer d i e r as canmercid grade to be used in a Safely Significant

R PartlCWnponent Safety Func(ion: 1. Pressure Bounday Integrity- Prevents helium leakage from the SCHe System.

2. Mdntain presaure boundary after Seismic event.

B. PartlcarpOnent FuncGonal Mode Safety Function X1:

[ ] Active - Mechsnical or Electrical change of state is required to occur for the wmponant to petform its safely

[ X I P--Changaofstateisnotrequiredfortheconponenttoperformitsssfetyfunction

[ ] M v e - Mechanical OT Electrical change of state is required to occur fw the canponent to petform its safety

[ X ] Passive - Changa of stata is not required forthe component to perform its safety function

[ ] Active - Mechanical OT Electrical charged state is required to cccur for the component to perform its safely

[ ] Passive -Change01 state is notrequiredfor the componentto p6nn its safelyfurction

func(ion

Safety Function W :

function.

Safety Function #3:

function.

12/15/98

Commercial Grade Item Upgrade Dedication Form ECNNo. NA COINo. CGI-SNF-D-13-P5-034 Title: KROHNE FLOW INDICATOWALAEM- M C A L HELIUM FLOW

INDICATfON AM) EIIGH FLOW ALARM IN THE SCHe PURGE SYSTEM

1 C. Host Canponent Safely Function (if applicable): I

5N F- 3430 RmNo 0

Fxge 3 of 12

2. 3. D. Failure Mechanisms(6) and the effects on canponent or system safety funclim (me worksheet 1): 1. Frecture of the indicetor body or of the piping connection - helium leekege from the SCHe

System. 7

Emrimmental Qualification Rwired: If yes: E n v i m n t a l Qualification Requirements y-I 1 Limiting Environmental Condtions: No 1x1 Required Saiely Functions

Environmental Condition B Qualification Period: Natural phenomena Hazad (NPH) Design RecpiM. If yes: NPH Design R@rements

yes 1x1 Performance C a t m : PC-3 No I I NPH Design Req’ts.: Seismic Condition B

HNFPRO-97, Rev. 0 W441 -P5. Rw. 2 Integrity

Required Safely Functions: Pressure Boundary

1 X ] Safely Class (SC) 1 j0eneralsenrice 1 1 Safely Significant (SS) If parVconponent Classiiication is Mmt from host canponenUsystwn, document basis

Drawings: H-1-82165. Rev. 2

CVDF-SSD-003

12/15/98

Commercial Grade Item Upgrade Dedication Form

~itlc: KROHNE FLOW INDICATOIUALARM- LoCALaELIUM FLOW ECNNo. NA COI No. CGI-SNF-D-13-P5-034

INDICATION AND HIGH FLOW ALARM IN THE SCHe PURGE

sbK-_.;ci3o Rev.No. 0

P.gs4oflZ

3. Perfcimanm critical Charecteristics (neceswy 8 wffident fw reasonable a s s u m that the Item will pfm its intended

2. phvslcal Cnlical Characterisbcs (necessary for reasonable assutance that the Item delr~~red is the Item specled) Maaid, Body Steinless Steel 1 .T X Meterid, Rocera Connection Steinless Steel 1 .T X

saf funclions Resawe Bounday Integrity

Environmsmd Seismic Condition B Note 2

0. NotmandLqend

No Leakage at Teat Pressure of 165Psi . Note3.

1. The flow irdicator is not subject to degradation et ambient conditions of 40°F M d 60% RH or 11 5°F M d 22% RH end is auitablo for Environmental Condition B application.

W-44l-P5. Rev. 2, Appendix 1, page 1-2, provides e seismic teating plan for these components et e seismic spectre TED.

3. Pressure teat et 110% of aystem design preasure of 150 psig. Expoawe to teat pressure may asrioualy degrade the readout function. Thia test ia considered to be e destructive teat.

2. Maintain pressure bomdary eftor Seismic event.

1 .T X I I

Acceptam Method: 1. spedal Test and Insp&on

1,IN for Inspection 1,T for Test

2. Commercial Grade Survey 3. Source VeMcafion 4. Vendor/ltem Histoty

12/15/98

Commercial Grade Item Upgrade Dedication Form ECNNo. NA COI No. CGI-SNF-D-13-P5-034 Titie: KROENJl FLOW JNDICATOIUALARM - LOCAL EEL= FLOW

JNDICATION AND HIGH FLOW ALARM IN THE SCHe PURGE

12/15/98

RnrNo. 0 SNF-3430 .

plgc 5 of 12

Commercial Grade Item Upgrade Dedication Form ECNNa. NA WINO. CGISNF-D-13-P5034 Tdc KROHNE FLOW INDICATOWALARM - MCAL HELIUM =OW

INDICATION AND EIGE FLOW ALARM IN THE SCHe PURGE L SYSTEM

9UF -39 30 RcvNo 0

@6ofl2

WORKSHEET 1 DEERMlNATlON OF FAILURE MECHANISMWODES

Typical Failure Definition Applicable to Canponent Mechanisms under Evaluation Fracture Separation of a d i d accompainied by little or no Yes F j No [ 1; If Yes, indcate

corrosion

Emsion

Open Citwit

short C i d t

Blockage

seizure

Unaccep$ble Vibra(i0n

hofRoperties

Excess Strain

M M C -

Ductile FraCaae

macrOSccpic plastic deformation.

The g M a l deterioration of a material due to chemical or eledrochemical reactions, such as oxidation, between the material and its environment Destruction of materials by the abrasive action of moving fluids, usually accelerated by the presenca of d i d parlicles Carried with the fluid. An electrical atwit that is unintentionally broken 80 that h a is IK) canplele path for current flow.

An abnmnal connec(ion by which an electrical cumt is connected to grwnd, or to some mrnhting body. resulting In W v e current flow. Clcgging of a filteting medum resulting in the inebility to perfcim its purification function or

Bindng of a normally moving item thmugh excassive prapwre, temptahre, friclion, jamning.

Mechanical oadlla(ions pmduced am beyond the defined permissible limits due to uMancing, pow support, or rotston at uitical speeds. A lo88 d mechanical endphvsical proper(ies of a material due towpmre to high tqmmtures, radation qosure. Under the action of excessive external fcims the material of the part has been deformed OT dstotted.

~ockage of now.

From polcmgd exposum to high temperahrre and sbess, the objedwill h a slow change in its physical (shape and dmension) and mechanical CharaCteriStiCS. FWUl8charactenzed ’ bytearingdmetal accompanied bv apwedaMe !am dastic

failure Mode. Failure of Transmitter Bodv o r the Process Connection Yes [ ] fa i lm Mode.

Yes [ ] failure Mode.

Yes [ ] failure Mode.

Yes [ ] failure Mode.

Yes [ ] failure Mode.

Yes [ ] failure Mode.

Yes [ 1 failure Mode.

Yes [ ] failure Mode.

Yes [ ] failure Mode.

Yes [ ] failure Mode.

No F]; If Yes, indcate

No F]; If Yes, indcate

No F]; If Yes, indcate

No F]; If Yes, indcate

No [XI; If Yes, indcate

No F]; If Yes, indcate

No F]; If Yes, indcate

No F]; If Yes, indcate

No F 1; If Yes, indcate

No F]; If Yes, indcate

Yes [ 1 failure Mode.

No F]; If Yes. ilxicate

1. Process co nnectionlbdv Break

2.

12/15/98

Commercial Grade Item Upgrade Dedication Form ECNNo. NA C(I1 No. CGI-SNp-D-l3-P5434 Ticls: KROHNE FLOW INDICATOWALARM - LOCAL HELIUM FLOW

INDICATION AND HIGH FLOW ALARM IN TEE SCHe PURGE

CHECKLIST 1 ACCEPTANCE METHOD 1

5t4G-W30 RCvNo. 0

Page7 of 12

SPECIAL TEST/INSPECTION VERIFICATION

ItemDcscription: Krohne Locd Flow Indicetor/Alenn - 15 Psig Schs System

system#: 13

Manufachw (AddmsJPhone):

Equip #: SCHe-FI/FSH-5*10, -5.29. -5.49. -5.52. - 5.69. -5.72. -5.76. -5.77. -5.78. -5.79 Model # DK 37/M R K125 W/120 VAC Relay md W/O Nmdle Valve

Supplier (Addresdphone):

P.O. #

1 1 1 1 1 1 1 1 1 1 1 1 1 1

1. NamepIateDate 2. ModdNumber 3. Manufacturer

I 4. Process Connection 5. Indicator Rage 6. Matsrid,Body 7. Meterid, Process Connection

Charaaenshc Naneplate Date Sample Sm*. All Items Acceptaace Cntma Per Vendor Manual b i p t Inspechon Plan I Repoa #

References (see -on 7) Krohne Product Suwev - Variable Area Flowmeters

12/16/98

Commercial Grade Item Upgrade Dedication Form ECNNo. NA CGINo. CGI-SNE-D-13-P5-034 Tie KROHNE FLOW INDICATOWALARM - Ix)cAL HELlUM FLOW

INDICATION AND HIGH FLOW ALARM IN THE SCHe PURGE SYSTEM

Charactwistic: Model Number Sample Size? All Items Acceptauc? Criteria: DK 37lM R K125 W1120 VAC Relay and W/O Needle Valva Receipt Inspection Plan / Report #:

Refemm (see Section 7):

Characteristic: Msnufacturar Sample Size*: All Items

Acceptance Qiterk Krohne Receipt Inspection Plan / Report #:

Referaces (see Section 7):

Chamauistic: h e a r s Connection Sample Size*: All Items Acceptance Criteria: 114 Inch FNPT (Horizontal Connections) Receipt Inspection Plan I Report #

References (see Section 7):

Characteristic: Indicator RMp8 Sample. Size.: All Items

R w N o 0

Page 8 of 12 sW-SCt30

Acceptance Criteria: 0.32--3.2 SCFM for FI-5.10. 5.29. 5.49. 5.69. 0.30--3.0 SCFM for Fl-5.76. 5.77.5.78.5.79

Test To Be. Performed by:

[ I%& [ ] S l I p p I i e r / M a n ~ * *

[ lother

Receipt Inspeaion Plan I Report #

NumbcrdItemstobeTestcd:

Test/lnspection Location:

Referem (sce Section 7).

12/15/98

Commercial Grade Item Upgrade Dedication Form ECNNo. NA ff i1 No. CGISNF-D-13-P5-034 Title. m w INDICATOIUALARM - LOCAL HELIUM FLOW

INDICATION AND HIGH FLOW ALARM IN THE SCae PURGE

Characteristic for Test: Motorial, Process Connection

Acceptance Criteria: Stainless Steel

Sample Size*: Normal Sampling Size Actual Test Value: Test PlanaodReport#

characteristic for Test: Pressure Boundary Integrity

Acceptance. Criteria- No Leakage at Test Pressure of ‘165 Psig

Sample Size*: Normal Sampling Size Actual Test Value:

References (see Section 7):

4NF- 3930 RnrNo 0

Page9 of 12

Test PlanandReport#:

CbaracteriStic for Test: Seismic Condition B

Refexaces (see Section 7):

Acceptance Cri- Maintain Pressure Boundary After Seismic Event. W441-P5, Rev. 2. Appendix I. page 1-2. provides a seiamic testing plan for these components at a seismic spectre TBD.

Sample Size*: Normal Sampling Size Actual Test V W .

* * l f S u ~ I i s & h u ~ or C&r. R c f s to ffil cbcd;li.t-2 for Suppa( lnforrmtion

12/15/98

X

X

X

X

X

X

X

X

X

vmd a

Commercial Grade Item U ade Dedication Fom CCtI No. CGI-SNF-D-13-Ps-034

Title: KROHNE FLDW INDICATOIUALARM - LOCAL EEJJUM FLOW

I

X DISPOSITION OF UNVERIFIED ORFALLED CRITICAL CEARAc"ERLsTIcs Critical Characteristic Disposition 1

' I

12/15/98

Commercial Grade Item Upgrade Dedication Form COI NO. CGl-SNF-D-13-Psd34

INDICATION AND HIGH m x l W ALARM IN THE ScHe PURGE

=No. NA Title:

SYSTEM I I

5hlP-3 9 30 Rcv.No. 0

Page 12 of 12

I Name Phone I ~~

Design Authority 0 Q.i 0 QC 0 cog - Engineer 0 CGI Engineer 0 FwmrenmtEngincer 0 othu 0

12/15/98