I GripsAAAAAAAAI Grips are used to secure plug bodies and provide strain relief

and arc of bend control. Constructed of galvanized steel mesh,

these grips are designed for indoor use.

Also available in stainless steel.

CableRange.32- .43.43- .56.56- .73.73- .85.85-1.00

1.00-1.25

CatalogNumbers7310-0017310-0027310-0037310-00473 1 0-0057310-006

Description1-0321-0431-0561-0731-0851-100

LengthEye Mesh1 '// 41 '/," 43/4

1 '/2 " 6

1 'A 6/21 '/2 " 8

1 '/2 " 1 0

Wide Range Strain Relief GripsAAAAAAAAStrain Relief Grips are used on cable to prevent pull-out,

damage resulting from flexing and to control arc of bend.

Grips are made with a single weave, galvanized steel mesh

and aluminum fittings. A gasket is used to provide a seal from

dust, filings and other foreign material.

CableRange

CatalogNumbers Description

FittingThread

SizeMeshLength

Non-Insulated— NPT Thread.22- .32.30- .43.40- .54.52- .73.70- .97.94-1.25

7303-0017303-0027303-0037303-0047303-0057303-006

SR-022SR-030SR-040SR-052SR-070SR-094

'/2"

Vi"/2"

%"

1 "

1 '/."

3'/4

3'/4

43/4

5%7"9"

Insulating Bushing — NFS Thread.22- .32.30- .43.40- .54.52- .73.70- .97.94-1.25

1.20-1.501.50-1.701.70-2.002.00-2.45

7303-0087303-0097303-0107303-01 17303-0127303-0137303-0147303-0157303-0167303-017

SRP-022SRP-030SRP-040SRP-052SRP-070SRP-094SRP-120SRP-140SRP-162SRP-200

'/21 '

'/21 '

' /21 '

3/4"

1 "

1 '/."

1 '/2 "

2"2/2"2'/2"

3'/4

3'/4

4%5%79ir/413' /4

13'/2

133/.

Add suffix -A after catalog number for insulated bushing.

R E M K E D E L V E R S

bending of the cable. They are used primarily where flexiblecable connects electrical equipment to bus duct. They are alsoused to support or restrain air hose and water hose.Double Bus Drop Grips store excess cable neatly.Bus Drop Grips with Safety Springs and Strain ReliefGrips can provide a complete flexible cord system whichadapts to any layout. The Strain Relief Grips relieve the strainon the terminals. The Bus Drop Grips provide positivepermanent support which, unlike rigid conduit systems, canbe adjusted instantly if equipment is repositioned. Almost anysystem can be installed quickly even in cases whereequipment and bus duct are distantly located or awkwardlypositioned.

Safety Spring -

Strain Relief Grips

Typical Bus Drop &Strain Relief System

MotorBox

MaterialThe standard mesh material is galvanized steel which hashigh tensile strength and corrosion resistance (more thanadequate for most indoor applications).Optional stainless steel grips are available.All Bus Drop Grips are "Wide Range" (to accept more cableper size) with strand equalizers which uniformly distributecompressive force over a large area of the cable for maximumgripping strength with minimum concentration of forcewithout pinching the cable.

Features/Benefits• Few Grips are needed to fit many cable sizes.• Readily installed, adjusted, repositioned, removed or re-

used which saves time and money when relocating plantwiring or machines.

• Easily attached to both open and closed end structures.• Automatically adjust their gripping to hold the required

load.• No special installer skill or special tools required.• Increases safety to personnel working in the application

area.

Working Load/Safety FactorThis is an abbreviated version of the more detailedinformation on catalog page 28. The approximate breakingstrength of the Remke grip represents an average calculationbased on test factors which have been determined in ourengineering labs using NEW grips and metal rods. As a ruleof thumb the working load may be considered 1/10 of the

approximate breaking strength listed in the catalog.CAUTION: The broad application of Remke grips requiresadequate safety factors be used to establish a SAFE workingload. Refer to specific catalog pages for more information.Single Eye Grips employ a single eye for each attachment toopen hooks or other open end structural members. Theformed eye tube assures long, trouble-free resistance to wear.Can be used with SAFETY SPRINGS.Universal Bail Grips employ a flexible "universal" bail eyefor each attachment around closed-end structures such aspipe, columns or through closed eyes. The universal bail is asecure, self-locking attachment and is reusable. Removal issimple and quick. Can be used with SAFETY SPRINGS.Safety Springs can be used with either SINGLE EYE orUNIVERSAL BAIL GRIPS to relieve sudden tensionsexerted on cable system. When used with single eye grip,disassemble drawbar from coil, placing drawbar through eyeof grip, then replace drawbar.

Liqua-Seal Mesh ConnectorsLiqua-Seal Mesh Connectors prevent pullout and providestrain relief when connecting liquid-tight flexible metalconduit to electrical enclosures.

MaterialThe standard mesh design is single weave, corrosion freestainless steel, these mesh grips are available with fittingsmade of steel (3/g"-l" straight connectors) or ductile iron (1-l/4"-2" straight connectors and all 45° and 90° connectors),with or without insulated throat.

Features/Benefits• The mesh exerts a uniformly distributed compressive force

over a large area of the conduit for maximum grippingwithout pinching the conduit.

• An endless weave conforms to the conduit, eliminatingwedging or crushing of the conduit at that point.

• Mesh material has high tensile strength and corrosionresistance.

• Readily installed, adjusted, repositioned, removed or reused.• Automatically adjust their gripping to hold the required

load.• No special installer skills or special tools required.

Working Load/Safety Factor(see Wide Range Strain Relief Grips)Standard Strain Relief Connector GripsStandard Strain Relief Connector Grips are used inconduit hubs or knock-outs at the point where the portableelectrical cable is to be terminated. The provide anenvironmental seal against dirt, moisture, coolants, corrosivefumes, etc. and provide strain relief where undue strain onthe cable would otherwise cause loosening or pull-out at theindividual wire terminals. Primary applications are in thewiring of portable power tools, power centers and bus dropcable systems.

Standard Support Grips Cross Reference (continued)AAAAAAAAClosed Mesh—Double Eye—Single Weave

CableRange.50- .62.63- .74.75- .99

1.00-1.241 . 2 5 - 1 . 4 91.50-1.741 .75-1 .992.00-2.492.50-2.993.00-3.493.50-3.99

Remke2201-0012201-0022201-0032201-0042201-0052201-0062201-0072201-0082201-0092201-0102 2 0 1 - 0 1 1

Closed Mesh — Single Eye — SingleCableRange.50- .62.63- .74.75- .99

1 .00 -1 .241 . 2 5 - 1 . 4 91 .50 -1 .741.75-1.992.00-2.492.50-2.993.00-3.493.50-3.99

Remke2201-0132201-0142201-0152201-0162201-0172201-0182201-0192201-0202201-0212201-0222201-023

(Bryant)EconomySPC050-DESPC062-DESPC075-DESPC100-DESPC125-DESPC150-DESPC175-DESPC200-DESPC250-DESPC300-DESPC350-DE

j Weave(Bryant)EconomySPC050-USPC062-USPC075-USPC100-USPC125-USPC150-USPC175-USPC200-USPC250-USPC300-USPC350-U

Pass & SeymourSlater/FlexcorFC050-UUFC062-UUFC075-UUFC100-UUFC125-UUFC150-UUFC175-UUFC200-UUFC250-UUFC300-UUFC350-UU

Pass & SeymourSlater/FlexcorFC050-UFC062-UFC075-UFC100-UFC125-UFC150-UFC175-UFC200-UFC250-UFC300-UFC350-U

(Hubbell)Kellems022-01-001022-01-002022-01-003022-01-005022-01-006022-01-007022-01-008022-01-009022-01-0100 2 2 - 0 1 - 0 1 1022-01-012

(Hubbel)Kellems022-01-013022-01-014022-01-015022-01-017022-01-018022-01-019022-01-020022-01-021022-01-022022-01-023022-01-024

Woodhead350013500235003350043500535006350073500835009350103 5 0 1 1

Woodhead3503035031350323503335034350353503635037350383503935040

Wide Range Strain Relief Grips Cross ReferenceA/WWWNon-lnsulated-NPT Thread

CableRange.22- .32.30- .43.40- .54.52- .73.70- .97.94- 1 .25

InsulatedCableRange.22- .32.30- .43.40- .54.52- .73.70- .97.94- 1 .25

1 . 2 0 - 1 . 5 01 .40- 1 .751.62-2.002.00-2.45

Remke7303-0017303-0027303-0037303-0047303-0057303-006

Bushing-NPS Thread

Remke7303-0087303-0097303-0107303-01 17303-0127303-0137303-0147303-0157303-0167303-017

(Bryant)EconomyBDSR25BDSR37BDSR50BDSR62BDSR87BDSR100

(Bryant)EconomyBDSR25-BBDSR37-BBDSR-50-BBDSR-62-BBDSR-87-BB D S R - 1 1 8 - BBDSR-125-BBDSR-150-BBDSR-175-BBDSR-200-B

Pass & SeymourSlater/FlexcorBOX22BOX30BOX40BOX52BOX70BOX94

Pass & SeymourSlater/FlexcorBOX22BOX30BOX40BOX52BOX70BOX94BOX 120BOX 140

(Hubbell)Kellems073-03-1200073-03-1201073-03-1202073-03-1203073-03-1204073-03-1205

(Hubbell)Kellems073-03-1206073-03-1207073-03-1208073-03-1209073-03-1210073-03 -1211073-03-1212073-03-1213073-03-1214073-03-1215

Woodhead

—

Woodhead36501365033650536508365123651536516365173 6 5 1 836519