i. earned degrees - city university of hong kong · 4 postdoc at cityu (co-advised with a....

1

October 2016

Kwok-Leung Tsui

City University of Hong Kong

(last five year highlighted)

I. EARNED DEGREES

Ph.D. in Statistics, University of Wisconsin, Madison.

M.Ph. in Mathematics, The Chinese University of Hong Kong.

B.Sc. in Chemistry, The Chinese University of Hong Kong.

II. EXPERIENCE

Academic:

Head of SEEM Dept. City University of Hong Kong 2011 - present

Chair Professor City University of Hong Kong 2009 - present

Professor Georgia Institute of Technology 2001 – 2011

Reader/Professor H K Univ. of Science & Tech 1996 – 1999

Associate Professor Georgia Institute of Technology 1990 - 2000

Member of Technical AT&T Bell Laboratories 1986 - 1990

Staff (Quality Assurance Center)

Statistical Consultant CALS Statistical Consulting Service 1985 - 1986

Research & Teaching University of Wisconsin, Madison 1981 - 1985

Assistant

Teaching Assistant The Chinese University of Hong Kong 1979 - 1981

Engineering and Statistical Consulting:

Technical Consultant in quality, statistics, and engineering:

AT&T, Philips, Motorola, SAIC, UPS, Six Continent Hotel Groups; Barnes and

Thornburg; AAMCO; Balch & Bingham.

Expert witness for Wilson, Sonsini, Goodrich, & Rosati: Case No. 1-03-CV-009885,

Amkor Technologies, Inc. Vs. Fujitsu Limited. Case in evaluating the testing and

inspection method for the defect problem and quality control responsibility of

computer hard-drives, October 2004 – April 2005.

Expert witness for Parker, Hudson, Rainer & Dobbs: Case in evaluating and testing

the quality and effectiveness of insecticide, 2006.

2

III. TEACHING

A. Individual Student Guidance

Ph.D. Students Supervised.

1. A. Li; started advising in Fall 1991; Comprehensive exam Spring 1992;

Graduated January 1995; Thesis title: "Analysis of Robust Design

Experiments and Taguchi Method in Quality Control".

2. G. R. Tucker; started in Fall 1993; graduated Summer 1995;

Thesis title: “A Quality Control Chart for Ordinal Categorical Data,”

(co-advised with W. Woodall at Univ. of Alabama.), Auburn University.

3. K. Palmer; started advising Summer 1994; graduated Summer 1998;

Project title: "Robust Optimization of Chemical Process Simulations.”

University of Southern California.

4. W. Jiang, started advising Fall 1996; graduated December 1999; Thesis

title: “Statistical Process Control and Automatic Process Control,”

Shanghai JiaoTong Univesity, (co-advised with F. Tsung.)

5. H. Liu, started advising Fall 1997, graduated June 2001; Thesis title,

“Statistical Quality Control on Supply Chain Management.” post-doc. in

University of Alberta, (co-advised with F. Tsung).

6. A. Luximon, started advising Spring 1999, graduated October 2001;

Thesis title: “Foot Modeling for Shoe Last Design,” (co-advised with R.

Goonetilleke), post-doc at Hong Kong Polytechnic University.

7. L. Shu, started advising Fall 1999, Thesis title, “Multi-stage Process

Control and Monitoring,” finished in Summer 2002, (co-advised with F.

Tsung), University of Macau.

8. S. Bae, Started advising Fall 2000, passed comprehensive exam. in 2000,

(co-advised with P. Kvam), graduated in December 2003, Hangyang

University.

9. T. Murphy, started advising Fall 2001, passed comprehensive exam in

2001, passed proposal in 2003, graduated in December 2004, Yale

University.

10. S.B. Kim, started advising Spring 2001, passed comprehensive exam in

2001, passed proposal in 2003, graduated in June 2005, Univ. of Texas-

Arlington, Korea University.

11. L. Bai, started advising Fall, 2000, passed comprehensive exam in 2002,

passed proposal in 2003, graduated in June 2005, Carlson Capital.

3

12. Y. Park, started advising Spring 2001, passed comprehensive exam in

2001, passed proposal in 2003, graduated in December 2004, Samsung.

13. S. Wang, started advising Fall, 2001, passed comprehensive exam in 2002,

passed proposal in 2005, graduated in August 2006, Bank of America.

14. X. Liu, started advising in Summer, 2006, passed comprehensive in Spring

2007, passed proposal in May, 2009, graduated in Summer 2011, Expedia.

15. S. Lo, started advising in Fall, 2006, passed comprehensive in Fall 2008,

passed proposal in Dec. 2008, graduated in August, 2010, Travelers Inc.

(co-advised with Y. Hung).

16. S. Han, started advising in Fall, 2007, passed comprehensive in Fall 2007,

passed proposal in Oct. 2008, graduated in June 2010, Korea Univ. (co-

advised with Y. Mei).

17. S. Reynolds, started advising in Spring 2008, passed comprehensive in

Fall 2007, passed proposal in 2014, graduated in Spring 2015, Center for

Disease Control and Prevention (co-advised with D. Goldsman).

18. M. L. Lee, started advising in Spring 2009, passed comprehensive in

Spring 2009, graduated in Fall 2013, Hongik University (co-advised with

S. Kim).

19. H. Zhao, started advising in Fall 2009, graduated in Mar. 2014, Macau

University of Science and Technology.

20. Y. Wang, started advising in Fall 2010, graduated in Jan. 2014, Xi’an Jiao

Tong University.

21. Y. Xing, started advising in Fall 2010, graduated in Mar. 2014, Postdoc at

Univ. of Maryland.

22. J. Cao, started advising in Fall 2010, graduated in Dec. 2014 (co-advised

with L. Shu).

23. Y. Hai, started advising in Fall 2010, graduated in Aug. 2015, Postdoc at

CityU.

24. S.S.Y. Ng, started advising in Fall 2011, graduated in Dec. 2014, Data

Scientist, ASTRI.

25. J. Tang, started advising in Fall 2011, graduated in May 2016, Postdoc at

Guangzhou University.

26. Y. Zhao, started advising in Summer 2013, graduated in Oct. 2015,

4

Postdoc at CityU (co-advised with A. Shrivastava).

27. F. Yang, started advising in Fall 2013.

28. H. Guo, started advising in Fall 2013, expected to graduate in Nov. 2016.

29. Q. Xu, started advising in Fall 2013.

30. M. Bakker, started advising in Fall 2014, (co-advised with H. Fung).

31. L. Yu, started advising in Fall 2015.

32. P. Xu, started advising in Summer 2016.

33. J. Omoleye, started advising in Fall 2016.

34. C.P. Lin, started advising in Fall 2016.

M.S. Thesis Students Supervised

1. S. McCaskey; started advising Fall 1993; Graduated December 1994;

Thesis title: "Analysis of Dynamic Characteristics in Robust Design

Experiments," works at Lucent Technology.

2. E. Ho; started advising Fall 1996; Graduated Summer 1998. Thesis title:

“Three Dimensional Foot Digitization.”

B. Other Teaching Activities

1. "Quality Improvement Using SPC and Taguchi Methods", April, 1992,

Jointly developed with H. Wadsworth and R. Heikes.

2. New course "DOE and the Taguchi Method".

IV. SCHOLARLY ACCOMPLISHMENTS

A. PATENTS, PUBLISHED BOOKS and CHAPTERS

1. Tsui, K.-L., "Taguchi's Robust Design and Some Alternatives," Chapter in

Statistics for Quality, 1996.

2. Patent No.: US 8,568,680 B2

Gas Treatment by Catalytic Ozone Oxidation

Inventor: K.S. Hui (Hong Kong, CN);K.L Tsui (Hong Kong, CN); M.O.

Fu (Hong Kong, CN), 2013.

Assignee: City University of Hong Kong.

5

3. Edesess, M., Tsui, K.-L., Fabbri, C., Peacock, G., “The Three Simple

Rules of Investing”, Berrett-Koehler, San Francisco, 2014.

B. Refereed Publications

Published:

p1. Lee, S. Y. and Tsui, K-L., "Covariance Structure Analysis in Several

Populations," Psychometrika, vol. 47, no. 3, pp. 297-308, 1982.

p2. Tsui, K. W., Matsumura, E. M. and Tsui, K.-L.,"Multinomial Dirichlet

Bounds for Dollar Unit Sampling in Auditing," The Accounting Review,

vol. LX, no. 1, pp. 76-96, 1985.

p3. Tsui, K.-L., Jewell, N. and Wu, C. F. J., “A Nonparametric Approach to

the Truncated Regression Problem,” Journal of the American Statistical

Association, vol. 83, pp. 785-792, 1988.

p4. Shoemaker, A. C., Tsui, K.-L. and Leon, R., "Discussion on Signal to

Noise Ratios, Performance Criteria and Transformation," Technometrics,

vol. 30, pp. 19-21, 1988.

p5. Tsui, K.-L., "Strategies for Planning Experiments Using Confounding

Tables and Orthogonal Arrays," The Quality and Reliability Engineering

International, vol. 4, pp. 113-122, 1988.

p6. Kacker, R. and Tsui, K.-L. "Interaction Graphs: Tools for Planning

Experiments," Journal of Quality Technology," vol. 22, no. 1, pp. 1-14,

1990.

p7. Shoemaker, A. C., Tsui, K.-L. and Wu, C.F.J.,"Economical

Experimentation Methods for Robust Parameter Design,” Technometrics,

vol. 33, pp. 415-428, 1991.

p8. Barton, R. R. and K.-L. Tsui, “Multivariate Yield Maximization using

CAD/CAE Models: Efficient Approximations Based on Mean and

Variance,” Design Theory and Methodology, ASME, 31, 1991.

p9. Barton, R. and Tsui, K.-L., “Multivariate Yield Maximization Using CAD

Models: Efficient Approximations Using Means and Variance,” Third

International ASME Conference, February, 1991.

p10. Jiang, H., Damodaran, S., Desai, P., Kumar, S., and Tsui, K.-L., “Analysis

of Tensile Recoil Method for the Compressive Strength Measurement,”

Polymer Materials Science & Engr., April 1991.

6

p11. Sun, X.-D. and Tsui, K.-L., “Consistency of Biased-Corrected Estimator

in Truncated Regression,” Proceedings of the International Symposium on

Nonparametric Statistics and Related Topics, Ottawa, 1991.

p12. Shoemaker, A.C. and Tsui, K.-L., "Taguchi's Parameter Design: A Panel

Discussion", Technometrics, vol. 34, pp. 127-161, 1992.

p13. Ng, K. and Tsui, K.-L., "Expressing Variability and Yield with a Focus on

the Customers," Quality Engineering, vol. 5, no. 2, pp. 255-268, 1992.

p14. Tsui, K.-L., "An Overview of Taguchi Method and Newly Developed

Statistical Methods on Robust Design", IIE Transactions, vol. 24/5, pp.

44-59, 1992.

p15. Shoemaker, A.C. and Tsui, K.-L., “Response Model Analysis for Robust

Design Experiments," Communications in Statistics, pp. 1037-1064, 1993.

p16. Leon, R.V., Shoemaker, A.S., and Tsui, K-L., "Discussion on “A

Systematic Approach to Planning for a Designed Industrial Experiment”,

Technometrics, vol. 35, no. 1, pp. 21-24, 1993.

p17. Tsui, K.-L. and Woodall, W.H., "Multivariate Control Charts Based on

Loss Functions", Sequential Analysis, vol. 12, no. 1, pp. 79-92, 1993.

p18. Amster, S. and Tsui, K.-L., "Counter Examples for the Component Search

Procedure", Quality Engineering, vol. 6, pp. 545-552, 1993.

p19. Jiang, H., Abhiraman, A.S., Tsui, K.-L., "Analysis of Failure in Recoil

FromTension of Pan-Based Carbon Fibers," Carbon, pp. 887-894, 1993.

p20. Chan, W., Allen, J., Mistree, F., and Tsui, K.-L., “Integration of Response

Surface Methods with the Compromise Decision Support Problem in

Developing Robust Design Procedure,” ASME Design Automation

Conference proceeding, Boston, ASME, p. 485-492, 1993.

p21. Hayter, A.J. and Tsui, K.-L., "Identification and Qualification in

Multivariate Quality Control Problems," Journal of Quality Technology,

vol. 26, no. 3, p. 197-208, 1994.

p22. Tsui, K.-L., "Avoiding Unnecessary Bias in Robust Design,"

Computational Statistics and Data Analysis, pp. 535-546, 1994.

p23. Tsui, K.-L. and Li, A., "Analysis of Smaller and Longer-the-Better Robust

Design Experiments," International Journal of Industrial Engineering, pp.

193-202, 1994.

p24. Chen, W., Allen, J.K., Mistree, F. and Tsui, K.-L., "A Procedure for

Robust Design: Minimizing Variations Caused by Noise and Control

Factors,” Journal of Mechanical Design, pp. 478-485, 1995.

7

p25. Tsui, K.-L., "Discussion of “Assessing Geometric Integrity Through

Spherical Regression Techniques”," Statistica Sinica, pp. 210-215, 1995.

p26. Dowling, M.M., Griffin, P.M., Tsui, K.-L., and Zhou, C., "A Comparison

of the Orthogonal Least Squares and Minimum Enclosing Zone Methods

for Form Error Estimation," Manufacturing Review, pp. 120-138, 1995.

p27. Tsui, K.-L., "A Multi-Step Analysis Procedure for Robust Design,"

Statistica Sinica, pp. 631-648, 1996.

p28. Tsui, K.-L., "A Critical Look at Taguchi’s Modeling Approach for Robust

Design," Journal of Applied Statistics, pp. 81-95, 1996.

P29. Shao, J. and Tsui, K.-L., “Bias Corrections of Form Tolerance

Estimation,” ASME Proceeding on Manufacturing Engineering, 1996.

p30. Zhou, C., Griffin, P.M., Dowling, M.M., and Tsui, K.-L., “Form

Error Estimation and Functional Tolerancing,” Advanced Tolerancing

Techniques, 1997.

p31. McCaskey, S.D. and Tsui, K.-L., "Analysis of Dynamic Robust Design

Experiments," International Journal of Production Research, pp. 1561-

1574, 1997.

p32. Dowling, M.M., Griffin, P.M., Tsui, K.-L., and Zhou, C., "Statistical

Issues in Geometric Tolerance Verification Using Coordinate Measuring

Machines," Technometrics, pp. 1-24, 1997.

p33. Woodall, W. H., Tsui, K.-L., & Tucker, G. R., “A Review of Statistical &

Fuzzy Quality Control Based on Categorical Data.” Frontiers in Statistical

Quality Control, pp. 83-89, 1997

p34. Tsui, K.-L., "Interpretations of Process Capability Indices and Some

Alternative," Quality Engineering, pp. 587-595, 1997.

p35. Tsui, K.-L., “Multivariate Robust Design Optimization,” Proceedings of

the International Conference on Computer Integrated Manufacturing,

Singapore, October 1997.

p36. Shao, J. and Tsui, K.-L., “Form Error Estimation Using Jackknife

Methods,” Statistica Sinica, pp. 119-133, 1998.

p37. Tsui, K.-L., "Alternatives of Taguchi Modeling Approach for Dynamic

Robust Design Problems," International Journal of Reliability, Quality and

Safety Engineering, pp. 115-131, 1998.

p38. Tsung, F., and Tsui, K.-L., “A Study of Integration of SPC & APC for

Process Monitoring,” Proceeding of Productivity & Quality Management

8

Frontiers VIII, Finland, 1998.

p39. Palmer, K. and Tsui, K.-L., “A Review and Interpretations of Process

Capability Indices,” Annals of Operations Research, pp. 31- 47, 1999.

p40. Tsui, K.-L., “Robust Design Optimization with Multiple Characteristics,”

International Journal of Production Research, pp. 433- 445, 1999.

p41. Tsui, K.-L., "Response Model Analysis of Dynamic Robust Design

Experiments," IIE Transactions, pp.1113-1122, 1999.

p42. Jiang, W. and Tsui, K.-L., “An Economic Model for Integrated Automatic

Process Control and Statistical Process Control,” IIE Transactions, pp.

505-513, 2000.

p43. Jiang, W., Tsui, K.-L. and Woodall, W., “A New SPC Monitoring

Method: the ARMA Chart,” Technometrics, pp. 399-410, 2000.

p44. Tsui, K.-L., “Modeling and Analysis of Dynamic Robust Design

Experiments,” Frontier in Statistical Quality Control, 2000.

p45. Loy, C., Goh, T.N., Xie, M., Tsui, K.-L., “Design of Experiments

Considering Multiple Characteristics”, ICMIT 2000.

p46. Palmer, K. and Tsui, K.-L., “Minimum Bias Latin Hypercube Designs,”

IIE Transactions, 2000.

p47. Jiang, W., & Tsui, K.-L., “Some Properties of the ARMA Charts”

Nonlinear Analysis-Theory Methods and Applications, 47 (3), 2073-2088,

2001.

p48. Yang, Z., Xie, M., Kuralmani, V., Tsui, K.-L., “Performance of Geometric

Charts with Estimated Limits,” Journal of Quality Technology, pp. 448-

458, 2002.

P49. Jiang, W., Tsui, K.-L., “Evaluation of SPC Monitoring for APC-

Controlled Processes,” Journal of Quality Technology, pp. 384-398, 2002.

p50. Jiang, W., Wu, H., Tsung, F., Nair V., & K.-L., Tsui, “PID Charts for

Process Monitoring,” Technometrics, pp. 205-214, 2002.

p51. Tsung, F. and Tsui, K.-L., “A Mean Shift Pattern Study on Integration of

SPC and APC for Process Monitoring, IIE Transactions, Vol. 35, 3, 0.231-

242, 2003.

p52. Woodall, W.H., Koudelik, R., Tsui, K.-L., Kim, K.B., Stoumbos, Z.G.,

Carvounis, C.P., “A Review and Analysis of the Mahalanobos-Taguchi

System”, Technometrics, pp. 1-29, 2003.

9

p53. Chen, V.C.P., Tsui, K.-L., Barton, R.R., Allen, J.K., “A Review of Design

and Modelling in Computer Experiments,” Statistics Handbook in

Industry, 2003.

p54. Tucker, G.R., Tsui, K.-L., & Woodall, W.H., “A Control Chart Method

for Ordinal Data”, American Journal of Mathematical & Management

Sciences, 2003.

p55. Luximon, A., Goonetilleke, R., Tsui, K.-L., “Foot Landmarking for

Footwear Customization”, Mass Customization, edited by M. Tseng, & F.

Piller, Springer, 2003.

p56. Goh, T.N., Low, P.C., Tsui, K.L., & Xie, M., “Impact of Six Sigma

Implementation on Stock Price Performance,” TQM & Business

Excellence, Vol. 14, No. 7, p. 751-781, 2003.

p.57. Xie, M., Tsui, K.-L., Goh, T.N., Cai, D.Q., “Process Capability Index for

Regularly Adjusted Processes,” International Journal of Production

Research, 2367-2377, 2002.

p.58. Alexopoulos, C., Goldsman, D., Tsui, K.-L., & Jiang, W., “SPC

Monitoring and Variance Estimation,” Frontier Statistical Quality Control

VII, 2003.

p.59. Cabrera, J., Tsui, K.-L., Goonetilleke, R., “A Scale Model for Fitting

Object Shape from Fixed Location Data,” IIE Transactions, 1099-1105,

2004.

p.60. Shu, L., Tsung, F., Tsui, K.-L., “Run Length Performance of Regression

Control Charts with Estimated Parameters”, Journal of Quality

Technology, 280-292, 2004.

p.61. Lin, Y., Mistree, F., Tsui, K.-L., & Allen, T.k., “Meta Model Validation

with Deterministic Computer Experiments”, American Institute of

Aeronautics & Astronautics, 2004.

P62. Murphy, T., Tsui, K.-L., Allen, J.K., “Compromise Design Settings for

Multiple Responses”, American Institute of Aeronautics & Astronautics,

2004.

p.63. Neo, H.Y., Xie, M., & Tsui, K.L., “Service Quality Analysis: A Case

Study of a 3PL Company, International of Logistics Systems &

Management., Vol. 1, p.64-80, 2004.

p.64. Shu, L., Tsung, F., & Tsui, K.-L., “Effects of Estimation Errors on Cause-

Selecting Chants”, IIE Transactions, 37, 559-567, 2005.

P65. Murphy, T., Tsui, K.-L., Allen, J.K., “A Review of Robust Design

Methods for Multiple Responses”, Research in Engineering Design, 16,

10

118-132, 2005.

p.66. He, B., Xie, M., Goh, T.N., Tsui, K.-L., “Control Charts Based on

Generalized Poisson Model for Count Data”, Quality Technology and

Quantitative Management, 4, 383-400, 2006.

p.67. Bae, S.J. and Tsui, K.-L., “Analysis of Dynamic Robust Design

Experiments with Explicit and Hidden Noise Variables”, Quality

Technology and Quantitative Management, 1, 55-75, 2006.

P68. Chen, V., Tsui, K.-L., Barton, R.R., Meckesheimer, M., “A Review on

Design, Modeling, and Applications of Computer Experiments”, IIE

Transactions, 38, 273-291, 2006.

p.69. Qian, Z., Jiang, W., Tsui, K.-L., “Churn Detection via Customer Profile

Modeling and Monitoring”, International Journal of Production Research,

2912-2933, 2006.

p.70. Kim, S.B., Tsui, K.-L., Borodovsky, M., “Multiple Testing in Large-Scale

Contingency Tables: Inferring Pair-Wise Amino Acid Patterns in Beta-

Sheets, 2(2), 193-217, International Journal of Bioinformatics Research

and Applications, 2006.

p71. Tsui, K.-L., Chen, V., Jiang, W., Aslandogan, A., “Data Mining Methods

and Applications”, Handbook in Applied Statistics, 2007.

p72. Jiang, W., Murphy, T., and Tsui, K.-L, “Statistical Methods for Quality

and Productivity Improvement”, Handbook in Applied Statistics, 2007.

p73. Huo, X., Kim, S.B., Tsui, K.-L., Wang, S., “FBP: A Frontier-Based Tree

Pruning Algorithm”, 18(4), 494-505, INFORMS Journal of Computing,

2006.

p74. Liu, H., Tsui, K.-L., Tsung, F., “A Nearly Optimal Order Policy to Reduce

Bullwhip Effect”, 2(1), 91-108, Quality Technology & Quantitative

Management, 2005.

p75. Kim, S.-H., Alexopoulos, C., Tsui, K.-L., & Wilson, J. “A Distribution

Free Tabular CuSum Chart for Auto-Correlated Data”, 39, 317-330, IIE

Transactions, 2007.

p76. Jiang, W., Au, T., Tsui, K.-L, “A Statistical Process Control Approach for

Business Activity Monitoring”, 39(3), 235-249, IIE Transactions, 2007.

p77. Chen, W., Xiong, Y., Tsui, K.-L., Wang, S., “Some Metrics and a

Bayesian Procedure for Validating Predictive Models in Engineering

Design”, ASME, IDTEC/CIE Conference, 2006.

p78. Bai, L., Liu, H., Tsui, K.-L., Ye, H., “Reducing Bullwhip Effect in Supply

11

Chains Using Control Variates”, 5(3), 221-241, Quality Technology and

Quantitative Management, 2007.

P79. Wang, S., Jiang, W., and Tsui, K.-L., “Adjusted Support Vector Machines

Based on A New Loss Function”, Proceeding of Workshop in Data

Mining and Machine Learning, 2007.

P80. Xiong, Y., Chen, W., Tsui, K.-L. “A New Variable Fidelity Optimization

Framework Based on Model Fusion and Objective-Oriented Sequential

Sampling”, Proceeding of ISETC/CIE 2007 ASME Conference, Las

Vegas, 2007.

p81. Murphy, T. and Tsui, K.-L., “Performance Measure Independent of

Adjustment (PERMIA): A General Performance Measure for Robust

Design”, Encyclopedia in Quality and Reliability, 2008.

p82. Murphy, T. and Tsui, K.-L., McShane-Vaughn, M., “Signal-to-Noise

Ratio: Taguchi’s Performance Measure for Robust Design”, Encyclopedia

in Quality and Reliability, 2008.

p83. Shu, L., Tsui, K.-L, and Tsung, F., “A Review of Regression Control

Charts”, Encyclopedia in Quality and Reliability, 2008.

p84. Chen, W., Xiong, Y., Tsui, K.-L., Wang, S., “A Design Driven Validation

Approach Using Bayesian Prediction”, 021101-12, Journal of Mechanical

Design, 2008.

p85. Xiong, Y., Chen, W., Tsui, K.-L. “A New Variable Fidelity Optimization

Framework Based on Model Fusion and Objective-Oriented Sequential

Sampling”, Journal of Mechanical Design, 130, 111401, 1-9, 2008.

p86. Shu, L., Jiang, W., & Tsui, K.-L., “A Weighted Cusum Chart for

Detecting Patterned Mean Shifts”, Journal of Quality Technology, 2008.

p87. Jiang, W., and Tsui, K.-L., "A Theoretical Framework and Efficiency

Study of Multivariate Statistical Process Control Charts”, IIE

Transactions, vol. 40, p. 650-663, 2008.

p88. Tsui, K.L., Chiu, W., Gierlich, P., Goldsman, D., Liu, X., Maschek, T., "A

Review of Healthcare, Public Health, and Syndromic Surveillance",

Quality Engineering, 20(4), 435-450, DOI: 10.1115/1.2809439, 2008.

p89. Wang, S., Jiang, W., and Tsui, K.L., "Adjusted Support Vector Machines

Based on A New Loss Function", Annals of Operation Research, 174(1),

83-101, DOI: 10.1007/s10479-008-0495-y, 2010.

P90. Xiong, Y., Chen, W., Tsui, K.-L., Apley, D., “A Better Understanding of

Updating Strategies in Validating Engineering Models”, Computer

Methods in Applied Mechanics and Engineering, 198, 1327-1337, 2009.

12

P91. Mei, Y., Kim, S.B., and Tsui, K.L., "Linear-mixed effects models for

feature selection in high-dimensional NMR spectra", Expert Systems with

Applications, 36(3), 4703-4708, doi:10.1016/j.eswa.2008.06.032, 2009.

P92. Tsui, K. L., Jiang, W., and Mei, Y., "CUSUM Charts for Multivariate

Monitoring and Forecasting", Encyclopedia of Operations Research and

Management Science, eorms0215, 2010.

P93. Wang, S., Chen, W., and Tsui, K.L. , "Bayesian Validation of Computer

Models", Technometrics, 51(4), 439-451, 2009.

P94. Kim, S.B., Tsui, K.L., Sukchotrat, T., and Chen, V., "A Comparison Study

and Discussion of the Mahalanobis-Taguchi System", International

Journal of Industrial and System Engineering, 4(6), 631-644, DOI:

10.1504/IJISE.2009.026768, 2009.

P95. Han, S. W., Tsui, K. L., Ariyajunya, B., and Kim, S. B., "A Comparison of

CUSUM, EWMA, and Temporal Scan Statistics for Detection of Increases

in Poisson Rates", Quality and Reliability Engineering Internationals,

26(3), 279 – 289, DOI: 10.1002/qre.1056, 2009.

P96. Kim, S.B., Huo, K., & Tsui, K.L., "A finite-sample simulation study of

cross validation in tree-based models", International Journal of

Information Technology and Management, 10:223-233, DOI

10.1007/s10799-009-0052-7, 2009.

P97. Murphy, T.E., McShane-Vaughn, M., and Tsui, K.L., "Principal

components for diagnosing dispersion in multivariate statistical process

control", Georgia Journal of Science, 67(2), 4-20, 2009.

P98. Lee, J., Alexopoulos, C., Goldsman, D., Kim, S.H., Tsui, K.L., and

Wilson, J.R., "Monitoring autocorrelated processes using a distribution-

free tabular CUSUM chart with automated variance estimation", IIE

Transactions, 41(11), 979-994, DOI: 10.1080/07408170902906035, 2009.

P99. Woodall, W. H., and Tsui, K. L., "Comments on ‘Some methodological

issues in biosurveillance’", Statistics in Medicine, 30(5), 430-433, DOI:

10.1002/sim.4047, 2011.

P100. Jiang, W., Han, S. W., Tsui, K. L., and Woodall, W. H., "Spatiotemporal

Surveillance Methods in the Presence of Spatial Correlation", Statistics in

Medicine, 30(5), 569-583, DOI: 10.1002/sim.3877, 2011.

P101. Tsui, K.L., Wong, S.Y., Jiang, W., Lin, C. J., "Recent research and

developments in temporal and spatiotemporal surveillance for public

health", IEEE Transactions on Reliability, 60(1), 49-58, DOI:

10.1109/TR.2010.2104192, 2011.

13

P102. Mei, Y., Han, S. W. and Tsui, K. L., "Early Detection of a Change in

Poisson Rate after Accounting for Population Size effects", Statistical

Sinica, 21(2) 597-624, SS-09-179, 2011.

P103. Shu, L., Jiang, W. and Tsui, K. L., "A comparison of weighted CUSUM

procedures that account for monotone changes in population size",

Statistics in Medicine, 30(7) 725-741, DOI: 10.1002/sim.4122, 2011.

P104. Andradóttir, S. and Chiu, W. and Goldsman, D. and Lee, M. and Tsui,

K.L. and Sander, B. and Fisman, D. and Nizam, A., "Reactive strategies

for containing developing outbreaks of pandemic influenza", BMC Public

Health, 11(Suppl 1):S1, DOI:10.1186/1471-2458-11-S1-S1, 2011.

p105. Su, Y., Shu, L.J., and Tsui, K.L., "Adaptive EWMA Procedures for

Monitoring Processes Subject to Linear Drifts", Computational Statistics

and Data Analysis, 55, 2819-2829, 2011.

p106. Xing, Y., Ma, E.W.M., Tsui, K.L., Pecht, M., "Battery Management

Systems in Electric and Hybrid Vehicles", Energies, 4, 1840-1857, 2011.

p107. Murphy, T., Lin, Y., Tsui, K.L., Chen, V., Allen, J., "Identifying Feasible

Design Concepts for Products with Competing Performance Requirements

by Metamodeling of Loss-Scaled Principal Components", Quality

Engineering, 23(2) 167-179, 2011.

p108. Jiang, W., Shu, L.J., Tsui, K.L., "Weighted CUSUM Control Charts for

Monitoring Poisson Processes with Varying Sample Sizes", Journal of

Quality Technology, 43(4) 346-362, 2011.

p109. Sukchotrat, T., Kim, S.B., Tsui, K.L., and Chen, V., "Integration of

Classification Algorithms and Control Chart Techniques for Monitoring

Multivariate Processes", Journal of Statistical Computation and

Simulation, 81(12) 1897-1911, 2011.

p110. Dai, Y., Baek, S.H., Garcia-Diaz, A., Yang, B., Tsui, K.L., Zhuang, J.,

"An Enhanced Engineering Perspective of Global Climate Systems and

Statistical Formulation of Terrestrial CO2 Exchanges", Theoretical and

Applied Climatology, 107, 347-359; DOI 10.1007/s00704-011-0471-3,

2012.

p111. Su, Y., Chan, L.C., Shu, L., Tsui, K.L., "Real-Time Prediction Models for

Output Power and Efficiency of Grid-Connected Solar Photovoltaic

Systems", Applied Energy, 93, 319-326, 2012.

p112. Di Maio, F., Hu, J., Tse, P., Pecht, M., Tsui, K., and Zio E., "Ensemble-

approaches for clustering health status of oil sand pumps", Expert Systems

with Applications, 39, 4847-4859, 2012.

p113. Tsui, K.L., Han, S.W., Jiang, W., Woodall, W.H., "A Review and

14

Comparison of Likelihood Based Charting Methods", IIE Transactions,

44(9) 724-743, 2012.

p114. Bai, L., Alexopoulos, C., Ferguson, M., Tsui, K.L., "A Simple and Robust

Batch-Ordering Inventory Policy Under Incomplete Demand Knowledge",

Computers and Industrial Engineering, 63(1):343-353, 2012.

p115. di Maio, F., Tsui, K.L., Zio, E., "Combining Relevance Vector Machines

and Exponential Regression for Bearing Residual Life Estimation",

Mechanical Systems and Signal Processing, 31: 405-427, 2012.

p116. Shu, L.J., Jiang, W., Tsui, K.L., "A Standardized Scan Statistic for

Detecting Spatial Clusters with Estimated Parameters", Naval Research

Logistics, 59(6):397-410, 2012.

p117. Hui, K.N., Yin C., Hui, K.S.O., Lee, J.Y., Li, M., Lee S.K., Tsui, K.L.,

Chao, C.Y.H, Kwong, C.W., "Synthesis of Co3O4 nanowire arrays

supported on Ni foam for removal of volatile organic compounds", Journal

of Nanoscience and Nanotechnology, 12(4): 3563-3566, 2012.

p118. Yuan, J., Ng, S.H., Tsui, K.L., "Calibration of Stochastic Computer

Models Using Stochastic Approximation Methods", IEEE Transactions

on Automation Science and Engineering, 10(1): 171-186, 2013.

p119. Wang, D., Tse, P.W., Tsui, K.L., "An enhanced Kurtogram method for

fault diagnosis of rolling element bearings", Mechanical Systems and

Signal Processing, 35(1): 176-199, 2013.

p120. Zhao, D., Wang, Y., Wang, X., Wei, X., Chen, S., Tsui, K.L., "Head Stack

Assembly Off-track Dynamics Investigation via Slider Protrusion Touch

Down", IEEE Transactions on Magnetics, 49(2):703-706, 2013.

p121. Wang, Y., Miao, Q., Ma, E.W.M., Tsui, K.L., Pecht, M.G., "Online

Anomaly Detection for Hard Disk Drive Based on Mahalanobis Distance",

PHM Special Section of IEEE Transactions on Reliability, 62(1): 136-145,

2013.

p122. Cheng, V.C.C., Tai, J.W.M., Wong, Z.S.Y., Chen, J.H.K., Pan, K.B.Q.,

Hai, Y., Ng, W.C., Chow, D.M.K., Yau, M.C.Y., Chan, J.F.W., Wong,

S.C.Y., Tse, H., Chan, S.S.C., Tsui, K.L., Chan, F.H.W., Ho, P.L., Yuen,

K.Y., "Transmission of methicillin-resistant staphylococcus aureus in the

long term care facilities in Hong Kong ", BMC Infectious Diseases,

13:205, 2013.

p123. Chen, N., Tsui, K.L., "Condition Monitoring and Remaining Useful Life

Prediction Using Degradation Signals: Revisited", IIE Transactions,

45(9):939-952, 2013.

p124. Xing, Y., Ma, E.W.M., Tsui, K.L., Pecht, M., "An Ensemble Model for

15

Predicting the Remaining Useful Performance of Lithium-ion Batteries",

Microelectronics Reliability special issue: Enabling Technologies for

Sustainable Battery: Advances in Battery Reliability, 53(6):811-820, 2013.

p125. Huang, W., Shu, L., Jiang, W., Tsui, K.L., "Evaluation of Run-Length

Distribution for CUSUM Charts under Gamma Distribution", IIE

Transactions, 45(9):981-994, 2013.

p126. Shu, L., Huang W., Su, Y., Tsui, K.L., "Computation of the Run Length

Percentiles of CUSUM Control Charts Under Changes in Variances",

Journal of Statistical Computation and Simulation, 83(7): 1238-1251,

2013.

p127. Xu, M., Wong, T.C., Wong, S.Y., Chin, K.S., Tsui, K.L., Hsia, R.Y.,

"Delays in service for non-emergent patients due to arrivals of emergent

patients in the emergency department: a case study in Hong Kong",

Journal of Emergency Medicine, 45(2): 271-280, 2013.

p128. Wang, Y., Jin, X., Chen, S., Wei, X., Tsui, K.L., "Effect of low-frequency

vibration in z-direction (out-of-plane) on slider dynamics", IEEE

Transactions on Magnetics, 49(9): 4977-4981; doi:

10.1109/TMAG.2013.2252359, 2013.

p129. Xing, Y., He W., Pecht, M., Tsui, K.L., "State of charge estimation of

lithium-ion batteries using the open-circuit voltage at various ambient

temperatures", Applied Energy, 113: 106-115, 2014.

p130. Jiang, W., Shu, L., Zhao, H.H., Tsui, K.L., "CUSUM Procedures for

Health Care Surveillance", Quality and Reliability Engineering

International, 29(6): 883-897, 2013.

p131. Ye, Z.S., Tsui, K.L, Wang, Y., Pecht, M., "Degradation data analysis

using Wiener processes with measurement errors", IEEE Transactions on

Reliability, 62(4): 772-780, 2013.

p132. Wang, Y., Ma, E.W.M., Chow, T.W.S., Tsui, K.L., "A Two-step

Parametric Method for Failure Prediction in Hard Disk Drives", IEEE

Transactions on Industrial Informatics, 10(1): 419-430, 2014.

p133. He, F., Shu, L., Tsui, K.L., "Adaptive CUSUM Charts for Monitoring

Linear Drifts in Poisson Rates", International Journal of Production

Economics, 148: 14-20, 2014.

p134. Ng, S.S.Y., Xing, Y., Tsui, K.L., "A naive Bayes model for robust

remaining useful life prediction of lithium-ion battery", Applied Energy,

118:114-123, 2014.

p135. Ng, S.S.Y., Tse, P.W., Tsui, K.L., "A One-Versus-All Class Binarization

Strategy for Bearing Diagnostics of Concurrent Defects", Sensors,

14:1295-1321, 2014.

16

p136. Tsui, K.L., Wong, S.Y., Goldsman, D., Edesess, M., "Tracking Infectious

Disease Spread for Global Pandemic Containment", IEEE Intelligent

Systems, 28(6):60-64, 2013.

p137. Park, Y., Baek, S.H., Kim, S.H., Tsui, K.L., "Statistical Process Control

Based Intrusion Detection and Monitoring", Quality and Reliability

Engineering International, 30(2): 257-273, 2014.

p138. Lin, C.J, Tsui, K.L., Lin, C.Y., "A Spatial-EWMA Framework for

Detecting Clustering", Quality and Reliability Engineering International,

30(2): 181-189, 2014.

p139. Wang, Y., Wei, X., Tsui, K.L., Chow, T.W.S., "Tribological degradation

of head-disk interface in hard disk drives under accelerated wear

condition", IEEE Transactions on Magnetics, 50(3):3301007, 2014.

p140. Jin, X., Chow, T.W.S., Tsui, K.L., "Online Anomaly Detection of

Brushless DC Motor Using Current Monitoring Technique", International

Journal of Performability Engineering, 10(3):263-271, 2014.

p141. Wang, Y., Ye, Z.S., Tsui, K.L., "Stochastic evaluation of magnetic head

wears in hard disk drives", IEEE Transactions on Magnetics, 50(5):1-7,

2014.

p142. Shu, L., Su, Y., Jiang, W., Tsui, K.L., "A Comparison of Exponentially

Weighted Moving Average Based Methods for Monitoring Increases in

Incidence Rate with Varying Population Size", IIE Transactions, 46(8):

798-812, 2014.

p143. Han, S.W., Jiang W., Shu L., Tsui, K.L., "A Comparison of Likelihood-

based Spatiotemporal Monitoring Methods Under Non-homogeneous

Population Size", Communications in Statistics - Simulation and

Computation, 44(1):14-39; DOI:10.1080/03610918.2013.763981, 2014.

p144. Li, M., Lu, S., Guo, J., Tsui, K.L., "Study on Flame Spread over Aviation

Kerosene and Diesel", Advanced Materials Research, 1016: 587-591,

2014.

p145. Shu L, Ling MH, Wong SY, Tsui KL, "Spatial Clustering in Public

Health: Advances and Challenges. In: Yang, H., Kundakcioglu.

Healthcare Intelligence: Turning Data into Knowledge", IEEE Intelligent

Systems, 29(3):65-68, 2014.

p146. Zhao H, Shu L, Tsui KL, A Window-Limited Generalized Likelihood

Ratio Test for Monitoring Poisson Processes with Linear Drifts, Journal of

Statistical Computation and Simulation, 85(15),

DOI:10.1080/00949655.2014.945933, 2014.

17

p147. Li M, Lu S, Guo J, Chen R, Tsui KL, "Flame spread over n-butanol at

sub-flash temperature in normal and elevated altitude environments",

Journal of Termal Analysis and Calorimetry, 119(1):401-409, 2015.

p148. Li M, Lu S, Guo J, Chen R, Tsui KL, "Initial fuel temperature effects on

flame spread over aviation kerosene in low- and high-altitude

environments", Fire Technology, DOI:10.1007/s10694-014-0395-4, 2014.

p149. Li M, Lu S, Guo J, Wu X, Tsui KL, "Effects of pool dimension on flame

spread of aviation kerosene coating on a metal substrate", International

Journal of Heat and Mass Transfer, 84:54-60, 2015.

p150. Ling MH, Tsui KL, Balakrishnan N, Accelerated Degradation Analysis for

the Quality of a System Based on the Gamma Process, IEEE Transactions

on Reliability, 64(1):463-472, 2015.

p151. Ng SSY, Cabrera J, Tse PWT, Chen AH, Tsui KL, Distance-based

analysis of dynamical systems reconstructed from vibrations for bearing

diagnostics, Nonlinear Dynamics, 80(1-2):147-165; DOI: 10.1007/s11071-

014-1857-4, 2015.

p152. Tang J, Brouste A, Tsui KL, Some improvements of wind speed Markov

chain modeling, Renewable Energy, 81:52-56, 2015.

p153. Ye ZS, Chen N, Tsui KL. A Bayesian Approach to Condition Monitoring

with Imperfect Inspections. IEEE Transactions on Reliability. 2015; 31(3):

513-522.

p154. Tsui KL, Chen N, Zhou Q, Hai Y, Wang W, Prognostics and Health

Management: A Review on Data Driven Approaches, Mathematical

Problems in Engineering 2015, (2015).

p155. Liu S, Lo S, Tsui K, Wang W, Modeling Movement Direction Choice and

Collision Avoidance in Agent-Based Model for Pedestrian Flow, Journal

of Transportation Engineering, 141(6), 2015.

p156. Wang Y, Wei XF, Liang XH, Yin SY, Zi YY, Peng YZ, Tsui KL, The

Instability of Angstrom-scale Head-disk Interface Induced by

Electrostatic Force, IEEE transactions on magnetics, 51(11), 2015.

p157. Wang D, Tsui KL, Tse PW, Zuo M, Principal components of super-high

dimensional statistical features and support vector machine for improving

identification accuracies of different gear crack levels under varying

working conditions, Shock and Vibration, 2015.

p158. Lin MY, Chin KS, Tsui KL, Wong TC, Genetic based discrete particle

swarm optimization for elderly Day care center timetabling, Computers

and Operations Research, 65,125-138, 2015.

18

p159. Wang Y., Wei H.F., Zi Y.Y., Tsui K.L., In Situ Measurement of Seeking

Speed and Seeking Induced Head-Disk Interface Instability in Hard Disk

Drives, Shock and Vibration, 501,989854, 2015.

p160. Lee M.L., GOLDSMAN D., KIM E.H., TSUI K.L., Spatiotemporal

biosurveillance with spatial clusters: control limit approximation and

impact of spatial correlation, IIE Transactions, 46(8), 2014.

p161. Zhao HH, Shu LJ, Jiang W, Tsui KL, An Adaptive CUSUM Chart for

Monitoring Poisson Rates with Increasing Population Sizes, European

Journal of Industrial Engineering, 9.5,2015:692-715.

p162. Yang F.F., Xing Y.J., Wang D., Tsui K.L., A comparative study of three

model-based algorithms for estimating state-of-charge of lithium-ion

batteries under a new combined dynamic loading profile, Applied

Energy164(2016): 387-399.

p163. Wang D., Tsui K.L., Zhou Q., Novel Gauss-Hermite integration based

Bayesian inference on optimal wavelet parameters for bearing fault

diagnosis, Mechanical Systems and Signal Processing, 72(2016):80-91.

p164. Wang Y., Wei X.F., Liang X.H., Zi Y.Y., Tsui K.L., Slider Dynamics and

Wear Behaviors at Sub-Nano-Clearance HeadDisk Interface, IEEE

Transaction on Magnetics, 52.1(2016):1-9.

p165. Wang Y., Wei X.F., Liang X.H.,Yin S.Y., Zi Y.Y., Tsui K.L., An In-situ

Measurement Method for Electric Potential at Head-disk Interface Using a

Thermal Asperity Sensor, IEEE Transaction on Magnetics, 52.1(2016):1-6.

p166. Y. Wang, Y. Peng, Y. Z, X. Jin, K. L. Tsui, “A Two-stage Data-driven

Based Prognostic Approach for Bearing Degradation Problem,” IEEE

Transactions on Industrial Informatics, online, doi:

10.1109/TII.2016.2535368.

p167. Wong, Z. S. Y., Goldsman, D., & Tsui, K. L.. Economic Evaluation of

Individual School Closure Strategies: The Hong Kong 2009 H1N1

Pandemic. PloS one, 2016,11(1), e0147052.

P168. Ling M.H., Wong S.Y., Tsui K.L., Efficient heterogeneous sampling for

stochastic simulation with an illustration in healthcare applications,

Communications in Statistics - Simulation and Computation,

DOI:10.1080/03610918.2014.977914, 2015.

Accepted

A1. Chen H, Goldsman D, Schmeiser,BW, Tsui KL, Symmetric X-bar Charts:

19

Sensitivity to Nonnormality and Control-Limit Estimation,

Communication in Statistics - Simulation and Computation,

DOI:10.1080/03610918.2014. 963615,2015.

A2. Shen X, Tsui KL, Woodall WH, Zou C, Self-starting control scheme for

Poisson count data, Technometrics, in press, 2015.

A3. Zhao Y, Shrivastava AK, Tsui KL, Imbalanced Classification by Learning

Hidden Data Structure, IIE Transactions, in press, 2015.

A4. Yang W.A., Zhou Q., Tsui K.L., Differential evolution-based feature

selection and parameter optimisation for extreme learning machine in tool

wear estimation, International Journal of Production Research,

doi:10.1080/00207543.2015.1111534, in press, 2015.

A5. Huang W.P. ,Shu L.J., Woodall W.H. , Tsui K.L., CUSUM Procedures

with probability control limits for monitoring processes with variable

sample sizes, IIE Transactions, editing, 2016.

A6. Huang W.P., Shu L, Cao J, Tsui KL. Probability Distribution of CUSUM

Charting Statistics. IIE Transactions, in press, 2015.

A7. Lin M.Y., Chin K.S., Wang X.J., Tsui K.L., The Therapist Assignment

Problem in Home Healthcare Structures, Expert Systems With

Applications, in press, 2016.

A8. Tsui, K. L., & Zhao, Y. (2016). Discussion of ‘Analyzing Behavioral Big

Data: Methodological, Practical, Ethical, and Moral Issues'. Quality

Engineering, in press, 2016

A9. Xu Q.N., Tsui K.L., Jiang W., Guo H.N., A Hybrid Approach for

Forecasting Patient Visits, Quality and Reliability Engineering

International, accepted, 2016.

A10. Design for Sequential Follow-up Experiments in Computer Emulations,

accepted, Technometrics.

Submitted

S1. Jiang, W., Au, T., Tsui, K.-L., Xie, M., “Process Monitoring with

Univariate & Multivariate C-charts”, submitted.

S2. Huo, X., Chen, J., Wang, S., Tsui, K.-L., “Support Vector Tree:

Simultaneous Maximal Margin & Maximal Purity”, submitted.

S3. Shu, L.J., Jiang, W., and Tsui, K.L., "An Updated Exponentially Weighted

Moving Average Methods for Modeling and Monitoring Increases in

Incidence Rate", submitted.

20

S4. Tsui, K.-L., Chiu, W., Goldsman, D., Han, S., Kim, M., Liu, X., Lo, S.,

Woodall, W.H., “A Two-Step EWMA Chart for Disease Surveillance”,

submitted to Advances in Disease Surveillance.

S5. Hung, Y. Lo, S., Tsui, K.-L., “High Dimension, Low sample Size

Logistics Mixed Model”, submitted.

S6. Shu, L., Jiang, W. and Tsui, K. L., “Weighted CUSUM Procedures for

Surveillance of Health Events with Effects of Inhomogeneous Population

Sizes”, submitted.

S7. Shu, L., Jiang, W. and Tsui, K. L., “A Spatial Scan Statistic”, submitted.

S8. Lin, C.J., Jiang, W., Tsui, K.L., "A uniform power likelihood ratio test and

applications in spatial cluster detection", submitted.

S9. Shen X, Yu Y, Tsui KL, Yan H. Optimal Capacity Allocation in Mass-

Casualty Incidents with Multiple Hospitals. Operations Research. 2014;

submitted.

S10. Shen X, Wong ZSY, Ling MH, Goldsman D, Tsui KL, Comparison of

Disease Transmission Algorithms, PLoS ONE, submitted, 2014.

S11. Wong ZSY, Lit ACH, Leung SY, Chin KS, Tsui KL, The Influence of

Subsequent Treatments and Reassessment Processes after the First

Physician Visit on AED Performance Improvement: A Simulation Study ,

WestJEM, submitted, 2014.

S12. Wong ZSY, Xu J, Guo H, Goldsman D, Tsui KL, An Overview of Aging

Populations and Long-term Care Systems in Developed Countries, BMC

Health Services Research, submitted, 2014.

S13. Liu SB, Lo SM, Wang WL, Tsui KL, Comparison of Lattice-Gas model

and Agent-Based continuous model on modeling bidirectional pedestrian

flow, Physica A, submitted, 2014.

S14. Li M, Lu S, Guo J, Chen R, Tsui KL, Precursor flame characteristics of

flame spread over aviation kerosene, Journal of Thermal Science, Under

review, 2014.

S15. Zhao Y, Shrivastava AK, Tsui KL, Regularized Gaussian Mixture Model

for High-dimensional Clustering, submitted, 2015.

S16. Zhao Y, Tsui KL, Shrivastava AK, Wong SY, Decomposition based

logistic regression on methicillin-resistant staphylococcus aureus (MRSA)

patient prognosis, , in preparation, 2014.

S17. Ling M.H., Wong S.Y., Tsui K.L., Stochastic Disease Transmission model

to Evaluate Attack Rate During Nosocomial, in preparation.

21

S18. C.J. Yan, J.F. Tang, K.L. Tsui and B.W. Jiang, Joint capacity and

appointment scheduling problem with general distribution service time,

IEEE Transactions on automation science and engineering, in preparation,

2015.

S19. Wong S.Y., Chin K.S., Xu J.P., Tsui K.L., Performance assessment

framework of the emergency department: A review, Hospital Practice,

Under review, 2015.

S20. Wong Z.Y., Jiang S.C., Chin K.S., Tsui K.L., A Systematic Review of

the Modelling of Patient Arrivals in Emergency Departments,

Emergency Medicine Journal, Under review, 2015.

S21. Wong Z.Y., Xu J.P., Goldsman D., Tsui K.L., A Comparison of Long-

term Care Systems in Developed Countries , in preparation, 2015.

S22. Wang D., Zhou Q., Tsui K.L., The upper bound of the dimensionless

smoothness index: revisited, Mechanical Systems and Signal Processing,

Under review, 2016.

S23. Wang D., Yang F.F., Tsui K.L., Zhou Q., Suk J.B., Remaining Useful Life

Prediction of Lithium-ion Batteries based o Spherical Cubature Particle

Filter, IEEE Transactions on Instrumentation and Instrument, Under

review, 2015.

S24. Tse P.W., Wang D., Chen H., Tsui K.L., State space formulation of

nonlinear vibration responses collected from a dynamic rotor-bearing

system: Extensions of bearing diagnostics to bearing prognostics,

Mechanical Systems and Signal Processing, Under review, 2016.

S25. Wang D., Zhao Y., Yang F.F., Tsui K.L., Nonlinear-Drifted Brownian

Motion with Multiple Hidden States and Its Application to Prognostics of

Lithium-Ion Batteries, Reliability Engineering and System Safety, Under

review, 2016.

S26. Wang D., Yang F.F., Zhao Y., Tsui K.L. , Remaining Useful Life

Prediction of Lithium-ion Batteries at Different Discharge Current Rates,

Reliability Engineering and System Safety, Under review, 2016.

C. Other Publications

1. Keny, R. and Tsui, K.-L., "Circuit Improvement Using Designed

Simulation Experiments," AT&T Internal Memorandum, 1988.

2. Tsui, K.-L., "An Automatic Experiment Planner for Robust Design,"

AT&T, Internal Memorandum, 1989.

22

3. Feinberg, E. B. and Tsui, K.-L. "Features and Requirements for the

Experimental Design and Statistical Analysis Modules of ATOMS,"

AT&T Technical Memorandum, 1989.

4. Sun, X. D. and Tsui, K.-L. "Consistency of Bias-Corrected Estimator in

Truncated Regression," Technical Report, University of Waterloo, 1990.

5. Kacker, R.N., Cook, H., Hoerl, R., Hooper, J., Lee, T., Lavery, J.E.,

Morgan, C., Nair, V., Oser, H.J. and Tsui, K.-L., "Improving the Quality

of Environmental Data and Regulatory Decisions at the EPA Through

TQM," Panel on Statistical Quality Control Procedures Report, National

Research Council, Washington, D.C., 1993.

6. Lee, S. Y. and Tsui, K.-L., "Some Remarks on Multiple Group Covariance

Structure Analysis," Proceedings of the American Statistical Association,

Section on Statistical Computing, p. 102, 1982.

7. Tsui, K.-L. and Liu, L., "Robust Design of a High Dimensional IC Process

Through Simulation Experiments," Proceedings of the

SEMICON/KOREA 90 Technical Symposium, 1990.

8. Shoemaker, A. C. and Tsui, K.-L., "Response Model Analysis for Robust

Design Experiments", Proceedings of the American Statistical

Association, Section on Physical and Engineering Sciences, 1992.

9. Tsui, K.-L., "New Experimental Design Methods for Quality

Improvement,"Proceedings of the 1993 NSF Design and Manufacturing

Systems Conference, Charlotte, North Carolina, pp. 1247-1251, 1993.

10. Dowling, M. M., Griffin, P.M., Tsui, K.-L., and Zhou, C., "Statistical

Issues in Geometric Tolerance Verification Using Coordinate Measuring

Machines," Proceedings of the American Statistical Association, Section

on Quality and Productivity, Knoxville, 1993.

11. Tsui, K.-L., "New Statistical Methods for Quality and Productivity

Improvement,”Proceedings of the 1994 NSF Design and Manufacturing

Systems Conference, MIT, Massachusetts, 1994.

12. Woodall, W.H., Tsui, K.-L. and Tucker, G.R., “A Review of Statistical

and Fuzzy Quality Control Charts Based on Categorical Data,” Proceeding

of 5th International Workshop on Intelligent Statistical Quality Control,

1995.

13. Tsui, K.-L., “Robust Parameter Design with Dynamic and Multiple

Characteristics,” Proceeding of the ASA Conference, Q&P Section, Los

Angeles, 1997.

14. Tsui, K.-L., An Alternative of Taguchi’s Approach for Dynamic Robust

23

Design,” Proceeding of International Conference on Quality & Reliability,

Hong Kong, September 1997.

15. Tsui, K.-L., “A Comparison of Modeling Approaches for Dynamic Robust

Design,” Proceeding of International Worskhop on Intelligent Statistical

Quality Control, 1998, Germany.

16. Jiang, W and Tsui, K.-L., “An Economical Model of APC & SPC Control

Charts,” Proceeding of ASA Conference, Q&P Section, Dallas, 1998.

17. Jiang, W., Tsui, K.-L., and Woodall, W.H., “An Autocorrelated Moving

Average Chart for Statistical Process Contol”, Proceeding of ASA

Conference, Q&P Section, Baltimore, 1999.

18. Liu, X., Chen, W., Tsui, K.-L , “Regression Model for Computer Model

Validation with Functional Responses’’, ASME DETC Conference, 2008.

19. Tsui, K. L., Goldsman, D., Jiang, W., and Wong, S. Y., "Recent Research

in Public Health Surveillance and Health Management", 2010 Prognostics

& System Health Management Conference (PHM-2010 Macau), pp. 1-7,

2010.

20. Xie, Y.J., Tsui, K.L., Xie, M., Goh, T.N., "Monitoring time-between-

events for health management", Prognostics and Health Management

Conference, 2010. PHM'10 (Jan 2010 Macau), 1-8, 2010.

21. Andradóttir, S., Chiu, W., Goldsman, D., Lee, M.L., Tsui, K.L., Fisman,

D., Sander, B., Nizam, A., "Simulation of Strategies for Containing

Pandemic Influenza", 2010 Winter Simulation Conference (WSC'10 5-8

Dec 2010), p. 2221-2229, 2010.

22. Xing, Y., Williard, N., Tsui, K.L., Pecht, M., "A comparative review of

prognostics-based reliability methods for Lithium batteries", Prognostics

and System Health Management Conference (PHM-Shenzhen), 2011, 1-6,

2011.

23. Wong S.Y., Hai, Y., Cheng, V.C.C., Yuen, K.Y., Tsui, K.L.,

"Prognostication of Methicillin-resistant Staphylococcus aureus (MRSA)

Patient Survival", 2011 Prognostics & System Health Management

Conference. PHM'11 (24-25 May 2011 Shenzhen), MU3177, 2011.

24. Di Maio, F., Ng, S.Y.S., Tsui, K.L., and Zio E., "Naïve Bayesian

Classifier for On-line Remaining Useful Life Prediction of Degrading

Bearings", Special Session on System Health Monitoring, Fault Diagnosis

and Prognosis, MMR 2011 (20-24 June 2011 Beijing), 2011.

25. Hai, Y., Cheng, V.C.C., Wong, S.Y., Tsui, K.L., Yuen, K.Y., "Logistic

Regression Analysis for Predicting Methicillinresistant Staphylococcus

Aureus (MRSA) In-hospital Mortality", The First International

24

Symposium on System Informatics and Engineering. ISSIE'2011 (11-13

Jul 2011 Qingdao), 2011.

26. Xing, Y., Zhang, S., Pecht, M., Tsui, K.L., "Research on Prognostics-

based Reliability for Lithium Batteries", The First International

Symposium on System Informatics and Engineering. ISSIE'2011 (11-13

Jul 2011 Qingdao), 2011.

27. Xing, Y., Miao, Q., Tsui, K.L., Pecht, M., "Prognostics and health

monitoring for Lithium-ion battery", IEEE International Conference on

Intelligence and Security Informatics (ISI-Hong Kong), 2011, 242-247,

2011.

28. Hu, J., Shu, L., Tse, P.W., Tsui, K.L., "A comparison of EWMA-type

charts under linear drifts in Poisson means", The 2011 IEEE International

Conference on Quality and Reliability ICQR (14-17 Sep 2011Thailand),

297-301, 2011.

29. Wong, S.Y., Tsui K.L., Chin, K.S., Xu, M., "A simulation study to

achieve healthcare service quality improvement in accident & emergency

department (AED)", The 2011 IEEE International Conference on Quality

and Reliability ICQR (14-17 Sep 2011Thailand), 259-263, 2011.

30. di Maio, F., Zio, E., Pecht, M., Tse, P.W., Tsui, K.L., "Ensemble of

unsupervised fuzzy C-Means classifiers for clustering health status of oil

sand pumps", European Safety and Reliability Conference ESREL 2011

(10-22 Sep 2011 France), , 2011.

31. Xu, M., Wong, T.C., Chin, K.S., Wong, S.Y., Tsui, K.L., "Modeling

patient visits to Hong Kong Accident and Emergency Department", The

IEEE International Conference on Industrial Engineering and Engineering

Management IEEM 2011 (6-9 Dec 2011), , 2011.

32. Hai, Y., Pan, B., Wong, S.Y., Cheng, V.C., Yuen, K.Y. Tsui, K.L., "Cox

model and model-based partition tree for the study of MRSA acquisition

in RCHE and hospital", International Symposium on Public Health and

Environmental Protection PHEP (28-30 May 2012 Macau), , 2012.

33. Zhao, H., Shu, L., Jiang, W., Tsui, K.-L., "A comparison of detection

probability of CUSUM procedures under increasing population sizes ",

2012 International Conference on Biomedical Engineering and

Biotechnology, iCBEB 2012; Macau; China; 28-30 May 2012, 1152-1155,

2012.

34. Wang, Y., Ma., E.W.M., Tsui, K.L., Pecht, M., "A Fusion Approach for

Anomaly Detection in Hard Disk Drives", 2012 Prognostics & System

Health Management Conference. PHM2012 (23-25 May 2012 Beijing),

MU3279, 2012.

25

35. Cao, J. Pan, K.B., Tsui, K.L., Wong, S.Y., "Disease surveillance by

clustering based on minimal internal distance", 2012 Prognostics &

System Health Management Conference. PHM2012 (23-25 May 2012

Beijing), article no. 6228842, 2012.

36. Hai, Y., Tsui, K.L., Zuo, M.J., "Gear Crack Level Classification Based on

Multinomial Logit Model and Cumulative Link Model", 2012 Prognostics

& System Health Management Conference. PHM2012 (23-25 May 2012

Beijing), 1-6, 2012.

37. Xing, Y., Ma, E.W.M., Tsui, K.-L., Pecht, M., "A case study on battery

life prediction using particle filtering", 2012 Prognostics & System Health

Management Conference. PHM2012 (23-25 May 2012 Beijing), article

no. 6228847, 2012.

38. Xing, Y., Ma, E.W.M., Tsui, K.-L., Pecht, M., "Influence of parameter

initialization on battery life prediction for online applications ", 2012 13th

International Conference on Electronic Packaging Technology and High

Density Packaging, ICEPT-HDP 2012; Guilin; China; 13-16 August 2012,

1042-1046, 2012.

39. Tse, P.W., Hu, J., Shrivastava, A.K., Tsui, K.L., "A Multivariate Control

Chart for Detecting a Possible Outbreak of Disease", 7th World Congress

on Engineering Asset Management (WCEAM 2012); South Korea, 8-12

Oct 2012, 2012.

40. Hai, Y., Tang J., Tsui, K.L., "Estimating the remaining useful life of Li-

ion batteries with a Bayesian updating model", The IEEE International

Conference on Industrial Engineering and Engineering Management

IEEM 2012, (10-13 Dec 2012 Hong Kong), 2254-2258, 2012.

41. Ng, S.S.Y., Tsui, K.L., "Robust remaining useful life prediction for Li-ion

batteries with a naive Bayesian Classifier", The IEEE International

Conference on Industrial Engineering and Engineering Management

IEEM 2012, (10-13 Dec 2012 Hong Kong), 2254-2258, 2012.

42. Chan, Y.H., Tsui, K.L., Wong, S.Y., "Synthetic population - a case study

of Hong Kong population", The IEEE International Conference on

Industrial Engineering and Engineering Management IEEM 2012, (10-13

Dec 2012 Hong Kong), 2113-2116, 2012.

43. Guo, H. Xu, J., Tsui, K.L., “An overview and comparison of healthcare

systems in developed countries”, Spring Research Conference on Systems

Engineering and Management Science 2014; SRC-SEMS2014 (16-17

May 2014 Shenzhen), 2254-2258, 2014.

44. Ng, S.S.Y., Cabrera, J., Tsui, K.L., “An application of dynamical system

reconstruction from vibrations for bearing diagnostics and prognostics”,

Spring Research Conference on Systems Engineering and Management

26

Science 2014; SRC-SEMS2014 (16-17 May 2014 Shenzhen), 1691-1695,

2014.

45. Zhao, Y., Tsui, K.L., Shrivastava, A.K., Wong, S.Y., “Decomposition

based logistic regression on methicillin-resistant staphylococcus aureus

(MRSA) patient prognosis”, Spring Research Conference on Systems


May 2014 Shenzhen), SRC12, 2014.

46. Yang, F.F., Wong, S.Y., Tsui, K.L., “A restructured work shift schedule

discussion for emergency department: a case study in Hong Kong”, Spring

Research Conference on Systems Engineering and Management Science

2014; SRC-SEMS2014 (16-17 May 2014 Shenzhen), SRC31, 2014.

47. Lin, M.Y., Chin, K.S., Tsui, K.L., “Operations improvement in home

health care: the patient assignment problem”, Spring Research Conference

on Systems Engineering and Management Science 2014; SRC-SEMS2014

(16-17 May 2014 Shenzhen), SRC24, 2014.

48. Chan, Y.H., Wong, S.Y., Tsui, K.L., “Modeling influenza pandemic in

Hong Kong”, Spring Research Conference on Systems Engineering and

Management Science 2014; SRC-SEMS2014 (16-17 May 2014

Shenzhen), SRC35, 2014.

49. Xu, Q.N., Wong, S.Y., Tsui, K.L., “A review of modeling influenza

epidemics and pandemics”, Spring Research Conference on Systems


May 2014 Shenzhen), SRC04, 2014.

50. Wang, Y., Cao, H., Zi, Y., Wei, X., Tsui, K.L., “An Accelerated Wear

Model for Magnetic Heads with Respect to Sensory Data”, 2014

Prognostics and System Health Management Conference; IEEE PHM

2014 (24-27 Aug 2014 Zhangjiajie, Hunan, China), SRC43, 2014.

51. Shrivastava, A.K., Cao, J., "A decomposition approach to imbalanced

classification", The First International Symposium on System Informatics

and Engineering. ISSIE'2011 (11-13 Jul 2011 Qingdao), SRC21, 2011.

52. Edesess, Michael, Tsui, Kwok L., Fabbri, Carol, Peacock, George, "The 3

Simple Rules Of Investing ", Berrett-Koehler Publishers, 1-240, 2014.

53. Edesess, Michael, Tsui, Kwok L., "How Many Monkeys Does It Take To

Find A Successful Strategy", Advisor Perspectives, 1-6, 2013.

54. Edesess, Michael, Tsui, Kwok L., "Why Does The U.S. Have High-Cost

Low-Quality Healthcare?", Advisor Perspectives, 1-6, 2013.

D. Conference Presentations

27

1. Tsui, K.-L., and Wu, C. F. J., "Nonparametric Inference in Truncated

Regression," Institute of Mathematical Statistics Annual Meeting, Las

Vegas, Nevada, August 7, 1985. (Invited)

2. Tsui, K.-L., Shoemaker, A. C. and Leon, R., "Discussion on Signal to

Noise Ratios, Performance Criteria and Transformation," American

Statistical Association Annual Meeting, San Francisco, California, August

18, 1987. (Invited)

3. Tsui, K.-L., "An Empirical Two-Step Procedure for Robust Design,"

TIMS/ORSA Joint National Conference, Washington, D.C., April 27,

1988. (Invited)

4. Tsui, K.-L., Keny, R., and Beale, R., "Circuit Improvement Using

Designed Simulation Experiments," American Statistical Association

Annual Meeting, New Orleans, Louisiana, August 20, 1988. (Invited)

5. Tsui, K.-L. and Shoemaker, A. C., "An Automatic Experiment Planner for

Robust Design," Design, Quality and Reliability Research Conference,

Murray Hill, New Jersey, October 6, 1988. (Invited)

6. Shoemaker, A. C., Tsui, K.-L. and Wu, C. F. J., "Economical

Experimentation Methods for Robust Parameter Design," American

Statistical Association Annual Meeting, Washington, D.C., August, 1989.

(Invited)

7. Tsui, K.-L. and Shoemaker, A. C., "An Automatic Experiment Planner for

Robust Design," Fall Technical Conference, Houston, Texas, October 26,

1989. (Invited)

8. Kacker, R. N. and Tsui, K.-L., "Interaction Graphs: Graphical Aids for

Planning Experiments," Fall Technical Conference, Journal of Quality

Technology Session, Houston, Texas, October 26, 1989. (Invited)

9. Tsui, K.-L., Shoemaker, A. C. and Wu, C. F. J., "Beyond Taguchi: An

Overview of Improved Statistical Methods for Robust Product and Process

Design," American Statistical Association Winter Conference, Orlando,

Florida, January 4, 1990. (Invited)

10. Tsui, K.-L., "Robust Design: Improving Product and Process Design

Through Efficient Experimentation," Fifth International Electronics

Assembly Conference, Scottsdale, Arizona, February, 1990. (Invited)

11. Tsui, K.-L. and Hooper, J. H., "Robust Parameter Design Through

Efficient Experimentation," SEMATECH Statistical Methods Workshop,

Austin, Texas, February, 1990 (Invited)

12. Liu, L. and Tsui, K.-L., "Design Optimization for an Amplifier with Worst

Case Concerns," Designing for Quality Workshop, Boulder, Colorado,

28

April, 1990. (Invited)

13. Tsui, K.-L. and Hooper, J. H., "Recent Advances in Statistical Methods in

Designing for Quality," Designing for Quality Workshop, Boulder,

Colorado, April, 1990. (Invited)

14. Tsui, K.-L. and Liu, L., "Robust Parameter Design Through Computer

Experiments," American Statistical Association Annual Meeting,

Anaheim, California, August, 1990. (Invited)

15. Tsui, K.-L. and Liu, L, "Robust Parameter Design Through Computer

Experiments," TIMS/ORSA Joint National Conference, Philadelphia,

Pennsylvania, October, 1990. (Invited)

16. Tsui, K.-L., "Simple Tools for Planning Experiments: Interaction Graphs

and Confounding Tables", American Statistical Association Annual

Meeting, Atlanta, Georgia, August, 1991. (Invited)

17. Tsui, K.-L. and Shoemaker, A.C., "Response Model Analysis for Robust

Design Experiments," American Statistical Association Annual Meeting,

Boston, Massachusetts, August, 1992. (Invited)

18. Tsui, K.-L., Dowling, M., Griffin, P., and Zhou, C., "Statistical Problems

in Geometric Tolerance Verification Using Coordinate Measures

Machines," Quality and Productivity Research Conference, Knoxville,

Tennessee, 1993 (Invited).

19. Tsui, K.-L., Dowling, M., Griffin, P., and Zhou, C., "Statistical Issues in

Geometric Tolerance Verification Using CMM," Research Conference on

Statistics in Industry and Technology, Chapel Hill, North Carolina, 1994

(Invited).

20. Tsui, K.-L., “A Critical Look at Taguchi’s Modeling Approach,” 4th

International Conference of ICSA, Beijing, 1995.

21. Tsui, K-L. and Shao, J., “Form Tolerance Evaluation by Jackknife,”

ASME Conference, Atlanta, 1996.

22. Tsui, K.-L., “Response Model Analysis of Dynamic Robust Design

Experiments, ASA Annual Conference, Los Angeles, August 1997.

23. Tsui, K.-L., “An Alternative of Taguchi’s Approach for Robust Design,”

2nd ICQR Conference, Hong Kong, September 1997.

24. Tsui, K.-L., "Robust Design for Multiple and Dynamic Characteristics,"

NSF Grantees Conference, Monterey, Mexico, January 1998.

25. Tsui, K.-L., Robust Design Modeling for Dynamic Problems,” Intelligent

Quality Control Workshop, Wuerzburg, Germany, September 1998.

29

26. Tsui, K.-L., Jiang, W., & Woodall, W.H., “A New SPC Monitoring: the

ARMA Chart,” INFORMS Conference, Philadelphia, 1999.

27. Tsui, K.-L. & Jiang, W., “New SPC charts: ARMA & PID”, ASA Annual

Conference, Atlanta, 2001.

28. Tsui, K.L. & Au, S.T., “Data Mining & Knowledge Discovery,”

INFORMS Conference, Miami, 2001.

29. Tsui, K.L., & Jiang, W., “An Overview of SPC Charts for Autocorrelated

Data,” Spring Research Conference, Ann Arbor, 2002.

30. Tsui, K.L. & Au, S.T., “Data Mining Applications,” INFORMS

Conference, San Jose, 2002.

31. Tsui, K.L., Woodall, W.H., Koudelik, R., Kim, K.B., Stoumbos, Z.,

Carvounis, C.P., “A Review & Analysis of MTS,” Fall Technical

Conference, October 2003.

32. …

E. Other Scholarly Accomplishments

Software

1. "AT&T Quality Workbench - Robust", Quality Technology Center,

AT&T Bell Labs, 1990.

V. SERVICE

A. Professional Contributions

1. Member, American Statistical Association, 1981-Present.

2. Student Representative, Awards Committee, Department of Statistics,

University of Wisconsin, Madison, 1984-1986.

3. Member, American Society for Quality Control, 1987-Present.

4. Chairman, Research Committee, Quality Assurance Center, AT&T Bell

Labs, 1988-1990.

5. Co-organizer, NSF Conference on Design, Quality and Reliability

Research Conference, Murray Hill, New Jersey, October 6, 1988.

6. Co-organizer, Bell Labs Statistics Day Conference, Holmdel, New Jersey,

30

August, 1988.

7. Georgia Tech Representative, Southern Regional Council on Statistics,

1990-2003.

8. Secretary (Elected), American Statistical Association, Atlanta Chapter,

1991.

9. Member, Panel on Statistical Quality Control, National Research Council,

1991-1992.

10. Program Chair, American Statistical Association Annual Conference,

Section on Physical and Engineering Sciences, Boston, 1992.

11. Vice President (Elected), American Statistical Association, Atlanta

Chapter, 1992.

12. President (Elected), Atlanta Chapter of American Statistical Association,

1993-1994.

13. Co-Chair, Distinguished Outside Speakers Committee, Section of Physical

and Engineering Sciences, American Statistical Association, 1993-1994.

14. Member, Proposal Review Panel of NSF Design, Manufacture &

Industrial Innovation Division, Production Systems, 1994.

15. Member, U.S. Technical Advisory Group to Technical Committee 69 (TC

69) in Applications of Statistical Methods, ISO, 1995-Present.

16. Quality Systems Provisional Auditor, Registration Accreditation Board,

ASQC, 1995.

17. Member, International Advisory Committee, the 2nd International

Conference on Quality and Reliability, 1997.

18. Panel Member, Research Grant Council of Hong Kong, 1998 - 2000.

19. Founding Chair-Elect, Section on Quality, Statistics, & Reliability,

INFORMS, 1999.

20. Chair, Section on Quality, Statistics & Reliability, INFORMS, 2000.

21. Program Chair, Cluster Sessions on QSR, INFORMS Annual Conference,

Philadelphia, Nov. 1999.

22. Program Chair, Cluster Sessions on QSR, INFORMS Annual Conference,

Salt Lake City, May 2000.

23. Member, Proposal Review Panel of NSF Design, Manufacture &

31

Industrial Innovation Division, Production Systems, 2000.

25. Member, CAREER Award Review Panel, of NSF Design, Manufacture &

Industrial Innovation Division, 2000.

26. Program Chair, Cluster Sessions on QSR, INFORMS International

Conference, Hawaii, June, 2001.

27. Program Chair, Invited Cluster Sessions on Data Mining, INFORMS

Annual Conference, San Jose, 2002.

28. Member, Canada Research Chairs Council, National Sciences &

Engineering Research, 2002-present.

29. Program Chair, Invited Cluster Sessions on Data Mining, INFORMS

Annual Conference, Atlanta, 2003.

30. Founding Chair, Section on Data Mining, INFORMS, 2003-04.

31. Member of Advisory Board, Section on Data Mining, INFORMS, 2005-

present.

32. External Examiner, Master Program in Data Science and Business

Statistics, The Chinese University of Hong Kong, 2004-2006.

33. External Examiner, Undergraduate Program in Statistics, The Chinese

University of Hong Kong, 2005-2007.

34. Member, Academic Council of the Beta Research School for Operations

Management and Logistics, Technical University of Eindhoven,

Netherlands, 2005-2008.

35. Member of Best Paper Award Committee, IIE Transactions, 2007.

36. Member of Review Panel, CMII, Engineering Design, 2007.

37. Member of Review Panel, CMII, Small Business Innovative Research,

2008.

38. Keynote Speaker, 4th International Symposium of Bioinformatics,

Atlanta, 2008.

39. Program Co-chair, First International Conference for Interface Between

Statistics and Engineering, Beijing, August, 2009.

40. Keynote Speaker, First International Conference in Prognostics and

Systems Health Management, Macau, January, 2010.

41. Keynote Speaker, Second International Conference in Prognostics and

32

Systems Health Management, Shenzhen, May, 2011.

42. General Co-chair, First International Symposium for Systems Informatics

Engineering, Qingdao, July, 2011.

43. General Chair, Spring Research Conference in Systems Engineering and

Management Science, Shenzhen, May, 2013.

44. General Co-chair, Second International Symposium for Systems

Informatics Engineering, Xian, July, 2013.

45. General Chair, ISI Satellite Meeting in Risk, Business and Industrial

Statistics, Hong Kong, August, 2013.

46. Congress Co-Chair, 8th World Congress of Engineering Asset

Management, Hong Kong, August, 2013.

47. Keynote Speaker, 8th World Congress of Engineering Asset Management,

Hong Kong, August, 2013.

48. Keynote Speaker, ISI Satellite Meeting in Risk, Business and Industrial

Statistics, Hong Kong, August, 2013.

49. General Chair, Spring Research Conference in Systems Engineering and

Management Science, Shenzhen, May, 2014.

50. Program Co-chair, Third International Conference for Interface Between

Statistics and Engineering, Hong Kong, December, 2014.

51. Panel Member, Research Assessment Exercise, Hong Kong University

Grants Committee, 2013-14.

52. Member, Science Program Committee, World Statistics Congress,

International Statistics Institute, 2013-15.

53. General Chair, International Research Conference in Systems Engineering

and Management Science, Wuhan, March, 2015.

54. Program Co-chair, Stu Hunter Conference, Leuven, Belgian, March 9-11,

2015.

55. Member, Statistics Advisory Board, Permanent Secretary for Financial

Services and the Treasury, June 2014-May 2016.

56. Program Co-chair, Stu Hunter Conference, Waterloo, Canada, March 7-9,

2015.

57. General Chair, International Research Conference in Systems Engineering

and Management Science, Beijing, May, 2016.

58. Program Co-chair, Fourth International Conference for Interface Between

33

Statistics and Engineering, Palermo, June, 2016.

59. VP for Communications, International Society for Business and Industrial

Statistics, 2015-17.

60. Chair, IIE Transactions Q&P Focused Area, Best Paper Selection

Committee, 2015-16.

61. Member, Stu Hunter Conference Management Committee, 2015-17.

Editorial and Reviewer Work for Technical Journals

1. Referee for: Journal of the American Statistical Association,

Technometrics, Journal of Quality Technology, Quality and Reliability

Engineering International, Institute of Industrial Engineering Transactions,

Association for Computing Machinery Transactions.

2. Department Editor, Quality and Reliability Engineering, IIE Transactions,

2005-present.

3. Guest Co-Editor, Special Issue in Data Mining, IIE Transactions, 2002.

4. Guest Co-Editor, Special Issue in Healthcare and Public Health

Surveillance, IIE Transactions, 2010.

5. Guest Co-Editor, Special issue on Big Data for Service and Manufacturing

Supply Chain Management, International Journal of Production

Economics, 2015.

6. Associate Editor, Technometrics, 2013-present.

7. Member, Technometrics Management Committee, 2017-19.

B. Campus Contributions

1. Member, Ph.D Comprehensive Examination Committee, School of

Industrial and Systems Engineering: Tina Barr, 1990.

2. Member, Institute M.S. in Statistics Committee, Georgia Institute of

Technology, 1990, 1991.

3. Member, Student Research Evaluation Committee, School of Industrial

and Systems Engineering, 1990.

4. Chairman, Ph.D Comprehensive Examination Committee in Statistics,

School of Industrial and Systems Engineering, 1991.

34

5. Chairman, Probability and Statistics Laboratory, School of Industrial and

Systems Engineering, 1991.

6. Member, Ph.D Dissertation Committee, School of Industrial and Systems

Engineering: Sang H. Lee, 1991.

7. Member, Ph.D Comprehensive Exam Committee, School of Industrial

and Systems Engineering: David Gibson, 1991.

8. Member, Statistics Program Ad Hoc Committee, Georgia Institute of

Technology, 1991.

9. Member, Statistics and Probability Program Planning Committee, Georgia

Institute of Technology, 1992.

10. Member, Advisory Committee, School of Industrial and Systems

Engineering, 1992-1993.

11. Member, Ph.D. Dissertation Committee, School of Industrial and Systems

Engineering: Tina Barr, 1992.


Engineering: David Gibson, 1994.

13. Member, Ph.D. Dissertation Committee, School of Management: Stacy

Nutt, 1994.

14. Member, Ph.D. Dissertation Committee, School of Management: Karim

Hatoum, 1994.

15. Member, Ph.D. Dissertation Committee, School of Mechanical

Engineering: Wei Chen, 1994.


Engineering: Daniel Ockerman, 1996.

17. Member, Ph.D. Dissertation Committee, School of Mechanical

Engineering: Pat Koch, 1997.

18. Member, Ph.D. Dissertation Committee, Department of Industrial

Engineering, HKUST, Yimin Cai, 1997.

19. Member, Ph.D. Proposal Committee, School of Mechanical Engineering:

M.C. Marston, 1998.

20. Member, Ph.D. Dissertation Committee, Department of Management

Sciences, HKUST: W. S. Cho, 1999.

21. Member, Master Thesis Committee, Department of Management Science,

35

HKUST: K. F. Leung, 1999.

22. Member, Faculty Development Committee, Department of Industrial

Engineering, HKUST: 1995-99 (as chair in 1999).

23. Member, Promotion and Tenure Committee, Department of Industrial

Engineering, HKUST: 1998-99.

24. Member, Engineering Promotion & Substantiation Committee, School of

Engineering, HKUST: 1997-99.

25. Member, Undergraduate Committee, School of Industrial & Systems


26. Member, Ph.D. Comprehensive Exam Committee, School of Industrial &

Systems Engineering, 1999.

27. Member, Ph.D., Dissertation Committee, School of Mechanical

Engineering: M.C. Marston, 2000.

28. Chair, Ph.D. Comprehensive Exam Committee, Statistics Area, School of

Industrial & Systems Engineering, 2000.

29. Director, Statistics Center, School of Industrial & Systems Engineering,

2000 - present.

30. Member, IT Committee, School of Industrial & Systems Engineering,

2001 – 2003.

31. Member, Reappointment, Promotional & Tenure Committee, School of

Industrial & Systems Engineering, 2002 – 2005.

32. Chair, Reappointment, Promotional & Tenure Committee, School of

Industrial & Systems Engineering, 2002-2004.

33. Member, Reappointment, Promotional & Tenure Committee, College of

Engineering, 2005 – 2007.

34. Member, Faculty Search Committee, School of Industrial & Systems


35. External Examiner, M.Sc. program in Data Science and Business

Statistics, The Chinese University of Hong Kong, 2009-10.

36. External Examiner, UG program in Statistics, The Chinese University of

Hong Kong, 2007-09.

37. Member, Department Staffing Committee, Department of Manufacturing

Engineering and Engineering Management, 2009-11.

36

38. Member, Dean Interview Committee, College of Science and Engineering,

City University of Hong Kong, 2010.

39. Member, Dean Interview Committee, College of Language Arts and

Social Sciences, City University of Hong Kong, 2011.

40. Member, Head Search Committee, Department of Civil and Architecture

Engineering, City University of Hong Kong, 2011.

41. Member, Head Interview Committee, Department of Civil and

Architecture Engineering, City University of Hong Kong, 2011.

42. Chair, Department Staffing Committee, Department of Systems

Engineering and Engineering Management, 2012-15.

43. Member, Head Reappointment Committee, Department of Applied

Physics, City University of Hong Kong, 2015.

44. Member, Head Search Committee, Department of Accounting, City


45. Member, University Chair Professor Promotion Committee, City


VI. GRANTS AND CONTRACTS (all in US dollars unless specified otherwise)

A. As Principal Investigator, Co-Principal Investigator, or Co-Investigator

1. Development of New Experimental Design Methods for Quality

Improvement (PI: Tsui)

NSF Grant # DDM-9114554

Amount Requested: US$75,000, April 1991

Result: Funded US$75,000 (September 1, 1991 - February 28, 1994)

2. Development of New Statistical Methods for Quality and Productivity

Improvement (PI: Tsui)

NSF Young Investigator Award, Grant #9257918

Result: Basic Fund US$25,000/per year for 5 years (from 1992)

Additional dollar-to-dollar matching fund up to $37,500/yr. for 5 years.

3. A Multi-Step Analysis Procedure for Robust Design (PI: Tsui)

NSF Grant #9312698

Amount Requested: US$82,354, April 1993

Result: Funded US$82,354 (September 1, 1993-February 28, 1996)

4. New Statistical Methods for Quality Improvement (PI: Tsui)

IBM (TQM/CQI Research Grant)

Amount Requested: US$11,594, August 1993

37

Result: Funded US$11,594 (September 1, 1993-August 31, 1994)

5. The Identification of Appropriate Control Chart Methods for Monitoring

Indicator Variables in Safety Performance Analysis (PI: Tsui)

Computational Mechanics Center and Federal Aviation Administration

Amount Requested: US$27,668, September 1993

Result: Funded US$27,668 (January 1994-August 31, 1995)

6. Statistical Problems on Coordinate Measuring Machines

Alcoa Technical Center Foundation (PI: Tsui)

Amount Requested: US$7,500

Result: Funded US$7,500 (unrestricted, 1994)

7. Research on Statistical Quality Control (PI: Tsui)

NSF Matching Fund


Result: Funded US$19,094 (Sept. 1994-Aug. 1995)

8. Control Charts for Safety Performance Analysis (PI: Tsui)

Federal Aviation Administration

Amount Requested; US$21,075

Result: Funded US$21,075 (1995-1996)

9. Robust Design Methods for Circuit Design Optimization (PI: Tsui)

Research Grant Council

Amount Requested: HK$330,000, 1995-1996

Result: Funded

10. Optimization of Dynamic Systems Through Robust Design (PI: Tsui)

Croucher Foundation Research Grant


Result: Funded

11. Foot Modeling for Improved Fit and Comfort (PI: R.Goonetilleke,

Co-I: Tsui)



Result: Funded

12. Estimation for Form Tolerance Verification (PI: Tsui)

Direct Allocation Grant


Result: Funded

13. Statistical Process Control & Automatic Process Control (PI: F. Tsung,

Co-I: Tsui)


Amount Requested: HK$470,000

Result: Funded (1997-98)

38

14. Computer and Software for Statistics (with other statistics faculty)

Research Laboratory Funding (Dean’s Office)

Amount Funded: US$8,600 (1998)

15. Statistical Quality Control Methods

Georgia Tech Faculty Development Program (Funding for Professor

Charles Champ’s visit)

Amount Funded: US$28,500 (1998)

16. Analysis of Multivariate Robust Design Problems (PI: Tsui)




17. Foot Modeling for Shoe Last Design (PI: R. Gonmetilleke, Co-I: Tsui)




18. Multivariate Methods for On-line & Off-line Quality Control

National Science Foundation

Amount Requested: US$83,665 for Tsui, US$84,000 for Woodall


19. Multivariate Statistical Process Control (PI: F. Tsung, Co-I: Tsui)




20. Robust Design Optimization for Product Platform Design (PI: Tsui, Co-

PIs: Mistree, Allen, Chen)



Result: Funded (2001 – 2004)

21. Quality Control and Activity Monitoring for Telecommunication Industry (PI:

Tsui, Co-PIs: Wu, Jiang)




22. Foot Modeling & Fitness Design (PI: R. Goonetilleke, Co-I: Tsui)




23. Statistical Modeling on Implementing Transit Oriented Development in

Atlanta (PI: Tsui)

39

Georgia Regional Transportation Authority



24. Validating Predictive Models for Engineering Design (PIs: Tsui and Chen)


Amount Requested: US$205,000 for Tsui; US$215,000 for Chen


25. SACE: Statistics Aided Computer Experiments (PI: Wu, Co-PIs: Allen,

Joseph, Tsui)




26. Data Mining, Modeling, and Monitoring of Customer Activities (PI: Tsui, Co-

PI: Goldsman)

Inter-Continental Hotels Groups


Result: Funded (2007 - 2008)

27. A Web-Based Maternal Mortality Surveillance System (PI: Goldsman, Co-PIs:

Tsui, Alexopoulos)

Pan American Health Organizations



28. Simulator of Pandemic Influenza Intervention Strategies (PI: Tsui, Co-PIs:

Goldsman and Nizam)

World Health Organizations

Amount Request: US$100,000


29. An Arena Simulator for Pandemic Influenza Intervention (PI: Tsui, Co-PI:

Goldsman) Center for Disease Control and Prevention

Amount Request: US$23,000


30. A Web-Based Maternal Mortality Analysis and Surveillance System (PI:

Goldsman, Co-PI: Tsui)

Pan American Health Organizations



31. Collaborative Research: Validation, Calibration, and Prediction

of Computer Models with Functional Output (PIs: Tsui and Hung)

National Science Foundation (Service Enterprise System)

Amount Requested: US$229,000 for Tsui; US$140,000 for Hung, Rutgers


40

32. Collaborative Research Fund: Self Cognizant Prognostics for Electronics-Rich

Systems, Co-PCs: Tsui and Pecht , Co-Is: NH Chan, TC Chan (8730029)

Research Grant Council (Hong Kong)

Amount Requested: HK$7.3 M + HK$0. 73 M (matching)


33. Strategic Research Grant (SRG): Data Mining and Dynamic Monitoring for

Multi-stage Electronics Manufacturing, PI: Tsui, Co-I: SY Wong (7002553)




34. Strategic Research Grant (SRG): Process Monitoring and Improvement in a

Realistic Scenario, PI: AK Shrivastava, Co-I: Tsui (7002601)




35. Strategic Research Grant (SRG): Develop a Label-free Microfluidic Platform

for Circulating Tumor Cells Isolation and Enumeration, PI: Z Wang, Co-Is:

Tsui, MM Yang (7002578)




36. Strategic Research Grant (SRG): FMRI Connectivity Relation Analysis with

Advanced Structural Equation Modeling, PI: SC Ngan, Co-I: Tsui

City University of Hong Kong (7002566)



37. General Research Fund (GRF): Modeling and Monitoring of Functional

Computer Experiments, PI: Tsui, Co-I: Hung (9041578)




38. General Research Fund (GRF): Ozone-catalytic Oxidation System and Process

Optimization for Indoor Air Purification, PI: O. Hui, Co-I: Tsui (9041564)




39. Applied Research Grant (ARG): Performance Assessment of Plasma Assisted

Catalytic Oxidation Based Air Purification Technology for Indoor VOCs

Removal, PI: O. Hui, Co-I: Tsui (9667037)


Amount Requested: HK$ 1.275 M

41


40. Contract Research-RO (ConRes-RO): A Novel Prognosis System That Has

Embedded with Effective and Intelligent Performance Indicators for

Determining the Remnant Life of Slurry Pumps, PI: PW Tse, Co-I: Tsui

(9231036)

Syncrude Canada Ltd

Amount Requested: HK$1.2 M


41. Research Centres (ResCtrs): Centre for System Informatics Engineering, PI:

Tsui, Co-Is: KS Chin, O Hui, SC Ngan, AK Shrivastava, PW Tse, SY Wong,

M Xie, MG Pecht (9360144)


Amount Requested: HK$3 M (VPRT) + HK$1 M (CSE) + HK$1.65 M (VPRT)


42. General Research Fund (FRF): An Innovative Design for Flexible

Magnetostrictive Sensors with Optimized Parameters for the Integrity

Inspection of Cables/ropes, PI: PW Tse, Co-I: Tsui (9041682)




43. Infrastructure Account of School/College (APR): Safety, Reliability, and

Disruption Management of High Speed Rail (HSR) Systems, PI: Tsui, Co-Is:

M Xie, SM Lo, H Yan, LJ Zhao (910218)

CityU Research Project (Hong Kong)

Amount Requested: HK$ 1 M


44. Research Fund for the control of Infectious Diseases (RFCID): Development

of Efficient and Adaptable Simulation Models for Pandemic, PI: Tsui, Co-I:

SY Wong (9211026)

Food and Health Bureau (Hong Kong)



45. Strategic Research Grant (SRG-Fd): Temporal and Spatiotemporal Modeling

for Multiple Stream Data, PI: Tsui, Co-I: PW Tse (7002859)

CityU (Hong Kong)



46. Collaborative Research Fund (CRF): Syndromic Surveillance and Modeling

for Infectious Diseases, PC: Tsui, Co-Is: PW Tse, SY Wong, AB Chan, SM Lo,

RK Yuen (8730031)


Amount Requested: HK$ 4.7 M + HK$ 0.47 M (matching)

42


47. Strategic Research Grant (SRG-Fd): Reliability Modeling for Prognostics and

Systems Health management, PI: Tsui, Co-I: Q Zhou

CityU (Hong Kong)



48. Innovation and Technology Fund (ITF): Development and Investigation of a

High-energy Efficient Ozone-catalytic Oxidation Based Air Purifier, PI: OKS

Hui, Co-Is: Tsui, M Xie, X Wu (9440087)

Innovation and Technology Commission (Hong Kong)



49. Theme-based Research Fund (TRS): Delivering 21st Century Healthcare in

Hong Kong –Building a Quality-and-Efficiency Driven System, PC: F. Chen,

Co-PIs: Tsui, KS Chin, G Huang, KK Lai, E Wong, H Yan, D Yau.


Amount Requested: HK$ 20.45 M (HK$4 M budget for Tsui)


50. General Research Fund (GRF): Integrated modeling for remaining useful life

prediction and system health management, PI: Q Zhou, Co-I: Tsui




51. Strategic Research Grant (SRG-Fd): Statistical Methods for Spatiotemporal

Surveillance, PI: Tsui, Co-Is: SH Kim, D Goldsman

CityU (Hong Kong)



52. General Research Fund: Bayesian Modeling for Prognostics and Systems

Health Management, PI: Tsui, Co-I: A Ling

Natural Science Foundation of China

Amount Requested: RMB 600,000


53. Innovation and Technology Fund (ITF): Innovative Guided-Wave Sensor and

System for Inspecting the Integrity and Corrosion Extent of Buried and

Covered Pipes, PI: P. Tse, Co-Is: Tsui, Xie

Innovation and Technology Commission (Hong Kong)



43

54. International Collaborative Research Grant: Human health management and

life/disease risk assessment, PI: WB Wang, Co-PIs: Tsui, B Fu, Y Ying, WH

Woodall

Natural Science Foundation of China

Amount Requested: RMB 2.5 M (RMB 300,000 for Tsui)


55. Innovative Environment Research Grant: Electric Vehicle Energy Management

Systems Key Laboratory, PI: S Liao, Co-PIs: Tsui, X Li

Shenzhen City Government

Amount Request: RMB 3 M


56. UGC Education Fund: Collaborative Learning Immersive Project, PC: J Shaw,

Co-PIs: Tsui, Kenderdine, Wagner

University Grants Council

Amount Requested: HK$ 14 M (HK$ 4.4 M budget for Tsui)


57. ECF Fund: Regulatory and Financial Technologies to Increase Incentives for

Energy Efficiency Investments, PI: Tsui, Co-I: M. Edesess

Environment and Conservation Fund (Hong Kong)



58. Theme-based Research Fund (TRS): Safety, Reliability, and Disruption

Management for HSR and Metro Systems, PC: Tsui, Co-PIs: Xie,

Singpurwalla, Bensoussan, Lo, Yuen, Tse, Shou, Yu, etc.




VII. HONORS AND AWARDS

1. "Yale University" Scholarship, Chinese University of Hong Kong, 1976.

2. Guaranteed Financial Assistantship, University of Wisconsin, 1981-1984.

3. Quality Award, Quality Assurance Center, AT&T Bell Labs, 1988.

4. Individual Performance Award, Quality Assurance Center, AT&T Bell Labs, 1988 and 1989.

5. NSF Young Investigator Award, National Science Foundation, 1992.

6. Fellow of American Statistics Association, 2003.

7. Jack Youden Award, Technometrics, 2004.

44

8. Fellow of American Society for Quality, 2013.

9. Elected Member, International Statistical Institute, 2013.

10. Fellow of International Society of Engineering Asset management, 2013.

11. United States Patent #8,568,680 B2, “Gas Treatment by Catalytic Ozone Oxidation”,

with KS Hui and MO Fu, 2013.

12. Best Paper Award, IIE Transactions, 2013.

13. Fellow of the Hong Kong Institution of Engineers (HKIE), 2014.

14. Honorary Advisor of International Institute of Utility Specialists (IIUS), 2015.

15. Elected Council Member, International Statistical Institute, 2017-20.

i. earned degrees - city university of hong kong · 4 postdoc at cityu (co-advised with a....

Documents