i com receivers catalog 2010

7/29/2019 i Com Receivers Catalog 2010

1/16


2/16

Wideband coverage

The IC-R9500 covers 0.0053335MHz*

1

inSSB, AM, FM, WFM, CW, FSK and P25*2

modes. It is suitable for a wide variety of radio

monitoring and listening activities.*1 Frequency range differs depending on version.

*2 Optional UT-122 digital unit is required.

Superb receiver performanceThe IC-R9500 achieves its amazing perfor-

mance by using a D-MOS FET array in the

1st mixer (below 30MHz) and an excellent IMD

roofing filter. The IC-R9500 has +40dBm IP3

and 109dB dynamic range at 14.1MHz. IP3

performance is +9.8dBm at 50MHz and

+6.2dBm at 620MHz (+5dBm (typical) from 30MHz

to 3335MHz).

Five roofing filters

The IC-R9500 has 5 independent roofing fil-ters (240, 50, 15, 6 and 3kHz) for improved selec-

tivity. In very crowded RF spectrum condi-

tions, it is extremely important to prevent

overload from strong signals. The 3kHz roof-

ing filter provides a 130dB (approx.)* blocking

dynamic range.

* At 15MHz reception, with 5kHz signal separation.

0.05ppm high frequency stabilityThe IC-R9500 uses an OCXO (Oven Control

Crystal Oscillator) unit which provides

0.05ppm frequency stability from 0C to

50C. The 10MHz reference frequency can

either be supplied to or input from external

equipment.

Multi function spectrum scope

Using a dedicated DSP unit improves thdynamic range of the spectrum scope. Th

IC-R9500 has four different display mode

such as normal/wide and center/fixed widt

The spectrum scope normally covers a rang

from 2.5kHz to 5MHz, while the wide ban

spectrum scope* observes up to 500MH

(10MHz, 25MHz, 50MHz, 100MHz 250MHz an

500MHz selectable). When using the norm

spectrum scope mode, the digital scopes f

ter width can vary from 200Hz to 20kHz wit

a variable sweep speed.

The peak search function automatical

moves the display marker to the stronge

signal on the scope screen. In addition

these features, the scope has 3 levels oattenuation (10dB, 20dB, 30dB).

* While using the wide band scope function, AF outp

is muted.

Example of spectrum scope centered on the receiving frequenc

Example of fixed spectrum scope range.

Professional communications receiver

with high performance

spectrum scope

With optional UT-122


3/16

7-inch wide color TFT LCD

The large 7-inch wide (800

480 pixels)active matrix display delivers quick response

time, high resolution and has a wide viewing

angle. The multi-function spectrum scope is

displayed in vivid color.The background color

is selectable from black or blue for your pref-

erence. In addition, the IC-R9500 has a VGA

connector allowing you to connect an exter-

nal monitor.

Multiple RSSIS-meter, dB, dB (emf) and dBm meter

types are selectable in the IC-R9500. The

dB, dB (emf) and dBm meter have 3dB of

accuracy*.

(* 10 to 70dB signal from 100kHz to 3335MHz at 25C)

Digital voice recorderThe IC-R9500 has two types of digital voice

recorders. One is the regular recorder,

recording for long periods in WAV format to

the built-in CF memory or an external USB

memory. The sampling rate is variable from

8kHz (SQ1) to 48kHz (SHQ). In SQ1 mode,

up to 130 minutes (approx.) of recorded

audio can be stored into the CF memory.The

other recorder is the short term voice

recorder that saves the previous 15 seconds

of radio audio into RAM, allowing you to play

back the audio instantly.

Dual DSP

The IC-R9500 incorporates two independent,32-bit floating point DSP units, a dedicated

DSP unit for receiver functions and another

for the spectrum scope. By using the power of

two independent DSP units, the radio can

respond to operator changes in an instant.

Other outstanding features[Receive assist functions]

Digital IF filter Digital twin PBT

Noise blanker Noise reduction

Notch filter Synchronous AM detection

FSK demodulator and decoder

10 VFOs 1220 memory channels

Multiple-scan functions

Voice synthesizer USB connector

SSB/CW/AM mode auto tuning function

AFC function compensates for frequenc

shifts (FM/WFM mode only) CW-R (revers

mode Preamp and attenuator 1/4 tuninstep function and dial click function AP

(Audio Peak Filter) AGC (Automatic Gain Control)

VSC (Voice Squelch Control) Input overloa

protection (HF bands only) Optional P25 digit

mode reception CI-V interface and RS

232C for PC remote control Analog TV tun

(NTSC/PAL/SECAM)*1 4 antenna connector

an SO-239, a phono (RCA) connector an

two type-N connectors S/P DIF output jac

Video input/output*1 Clock functio

IF output jack (10.7MHz) CTCSS an

DTCS tone squelch Simplified frequenc

calibration using WWV or WWVH

*1

TV tuner and video output are not available in thUSA version except for export or to authorized gover

ment users. Contact Icom America for details.


4/16

Various modes for wide range RxVarious modes are supported for listening not

only to amateur bands, FM or TV Broadcast

stations, but also marine and aviation commu-

nications. The IC-R8500 covers a wide fre-

quency range continuously from 0.1 to

1999.99999MHz* with 10Hz resolution.

* Guaranteed 0.11000MHz and 12401300MHz only ;

Cellular bands are blocked in the USA version.

Superior receive characteristicsThe IC-R8500 has superior receive sensitivity

over its entire range and the built-in, high qual-

ity crystal oscillator (TCXO) provides good fre-

quency stability of less than 100Hz drift below

30MHz; less than 3ppm above 30MHz. The

variable tuning system employed in the front-

end tuning circuit improves multi-signal char-

acteristics, ensuring enhanced receiving per-

formance.

Versatile scanning functionsBasic scanning, memory, priority and program

scans are available. For more advanced

needs, specific scans can also be selected.

VSC (voice scan control) provides efficient

scanning by skipping unmodulated signals.

IF shift and APF functionThe IF shift function works efficiently to reject

interference from nearby signals, especially in

SSB mode. APF adjusts the peak frequency of

the received audio, particularly in CW mode.

Ample 1000 memory channelsThe IC-R8500 has 800 memory channels

divided into 20 banks (40 channels each), plus

an auto memory write area of 100 channels

and a skip area of 100 channels.

Alphanumeric names can be assigned to the

channels (up to 8 characters) and banks (up to

5 characters) for easy recognition. There are

also 20 scan edge memory channels to store

10 sets of frequencies for programmed scan

plus 1 priority channel for priority scan.

Other outstanding features REC and REC-Remote terminals for taperecorder control and for recording received

signals

SO-239 type and phono (RCA) antenna con-

nectors for HF bands and type-N for VHF/UHF

S-meter squelch

Optional UT-102 Voice Synthesizer

Sleep timer (30, 60, 90, 120 min. selectable)

Noise blanker, RF attenuator, and selectable

AGC

AFC function tunes the receiving frequency

to the center of FM or WFM signals

RS-232C serial interface connector

* For sale in the US to qualifying agencies or export only.

Discover a world of information and intrigue

PC remote controlThe optional RS-R8500 software allows you

control the IC-R8500 from your PC. All th

receiver functions can be accessed from th

front panel screen. The memory channel li

and program scan list makes it easier to ed

the contents, and the band scope screen pro

vides a special function the IC-R8500 doe

not provide. When you find a busy frequenc

clicking on the screen will tune to that fre

quency.

Bank name Channel name

Rear view

Band scope Screen

Front Panel Screen


5/16

High sensitivity receiver circuitIcoms wide-band technology provides a con-

sistent receiver sensitivity over the entire

receive frequency range: 0.0360MHz*1. The

IC-R75 makes it easy to receive communica-

tions world wide.

*1 Guaranteed 0.129.99MHz and 5054MHz only ;

Some versions have restricted coverage.

Superior dynamic rangeA wide dynamic range of over 100dB, and awell-designed triple conversion system help

minimize image and spurious responses for

better signal fidelity.

Twin PBT capabilityThe twin PBT (Passband Tuning) function elec-

tronically narrows or moves the IF passband

widths at two stages to avoid or remove inter-

fering signals.

Flexible filter selectionUp to two optional filters*2 can be installed,

providing flexible bandwidth selection.

*2 One each for 9MHz and 455kHz IF stage.

DSP capabilityWith the optional UT-106 DSP unit installed,*you can activate a noise reduction function

that improves the S/N ratio. And the automatic

notch filter automatically cuts interference

from carriers. These digital functions pull

desired signals out of noise, and provide

superior receive quality.

* Already installed with some versions.

Front mounted loud speakerThe IC-R75 has the speaker mounted on the

front panel. With the speaker facing the opera-

tor, audio is heard clearly and directly while

operating.

HF/50MHz coverage and innovative features...

Simple operationThe function display has a large alphanumer

readout that indicates up to 8-character mem

ory names for easy recognition. Often-use

keys such as mode switches, filter and tunin

step have been placed above the tuning di

for easy access.

Other features Optional PC remote control software RS-R7

Internal clock with ON/OFF, sleep timer

20dB attenuator and 2-level preamplifier

99 memories and 2 program scan edge

with 8-digit memory name

Selectable AGC (FAST/SLOW/OFF)

Noise blanker for eliminating pulse type nois RTTY/CW reverse mode and CW pitch contr Various scanning functions

Adjustable LCD backlighting

CI-V capability for computer control RS-232C serial interface connector

0.03 1.0 10.0 20.0 30.0 50.0Frequency (MHz)

Measurement conditions

Mode : USB (10dB S/N)

0.031.799999MHz : PREAMP OFF

1.8029.999999MHz : PREAMP 1 ON

30.0060.000000MHz : PREAMP 2 ONSensitivity(V)

60.0

0.1

0.5

1.0

5.0

10.0

Receive sensitivity characteristics example

CFWS450E (15 kHz)

CFWS450HT (6 kHz)

FL-65 (2.4 kHz)

9 MHz IF filter 455 kHz IF filter

2nd IF

signal

3rd IF

signal

MixerFL-23 (15 kHz)

FL-272 (2.4 kHz)

FL-103 (2.8 kHz)

FL-223 (1.9 kHz)

FL-100 (500 Hz)

FL-232 (350 Hz)

FL-101 (250 Hz)

optional

Filter Construction

FL-257 (3.3 kHz)

FL-222 (1.8 kHz)

FL-52A (500 Hz)

FL-53A (250 Hz)

optional

Measurement conditionsFrequency : 14.15MHz (100kHz separation)Mode : CWBandwidth : 500Hz (both 2nd and 3rd IF)PREAMP, ATT : OFF

104.5dB (PREAMP OFF)

103.5dB (PREAMP1 ON)

Intercept points

* Dynamic range characteristics are not guaranteed.

140 120 100 80 60 40 20 0 16.022.0

Pream

pOFF

Signal output

Receiveroutputlevel(dB)

Pream

p1ON

Receiver input level

(dBm)

140

120

100

80

60

40

20

0

Dynamic range characteristics example

3rd IMDoutput

S+N = 3dBN


6/16

Dualwatch capabilityThe IC-R2500 has a dualwatch receive capa-

bility*1, allowing you to receive two bands

simultaneously. It covers 0.013299.999 MHz

in AM, FM, WFM, SSB, CW, DV*2 and P25*3

on the main band, while the sub-band covers

501300MHz in AM, FM and WFM modes.

*1 Two antennas are required for dualwatch receive.

*2 Optional UT-118 required. *3 Optional UT-122 required.

Already installed with some versions. *4 Frequency

range differs depending on version.

Diversity receive capabilityThe diversity receive* mode is useful for

mobile operation where the receive conditions

change continuously. It compares the signal

strength and dynamically chooses the anten-

na with better signal strength to maintain good

sound quality.

* Two antennas are required. Available in FM/DV/P25 modebetween 501300MHz only. Cannot use the diversity

receive function while using the dualwatch function.

Wide LCD display forindependent band controlThe wide LCD display shows both main/sub

band settings in an easy to read, symmetric

side by side layout. The controller provides

separate tuning, volume, squelch knobs and

function buttons for the left (Main) and right

(Sub) bands. Also, The LCD backlit color is

selectable from amber and green. Chose the

suitable color for lighting conditions or prefer-

ence.

1000 alphanumeric memorychannels1000 on-board memory channels at the touch

of a button! With Icoms Dynamic Memory Scan,

DMS, you have a versatile memory channelmanagement system at your command. The

1000 memory channels can be arranged by

service or personal preference in the 21 memo-ry banks. Selectively link the channels together

to scan depending on your needs.

Programming the memory channels and 6 char-acter memory names is simple with your PC.

60 channels per second scanQuickly scan through a band with the IC-R2500s

60 channel/second scan rate*. Program, priority

scan and various scanning modes are available.

* When tuning step is less than 100kHz in program scan mode.

Other features Optional DSP capability with UT-106

CTCSS/DTCS tones and duplex mode oper-

ation for monitoring a repeater

VSC (Voice squelch control) opens the squelch

only when a modulated signal is detected

IF filter selection for changing IF filter width

IF shift function (SSB, CW mode only)

Noise blanker eliminates pulse type noise such

as engine ignition noise (SSB, CW, AM mode only)

Weather alert function (USA and Canada versions only)

AFC function follows signal frequency drift in

FM mode (BW: 6kHz or 15kHz)

20dB (approx.) RF attenuator (below 1300MHz)

30 min 2 hour auto power off timer

Fast/slow AGC setting

Short/long squelch delay

PC control software is supplied (See the P

control page for details)

Supplied accessories AD-113A/E* Controller cable, 3.5m; 11.5ft Antenna

USB cable Software CD Controller head

* This receiver consumes vehicle battery power in stand-by mod

We advise you to turn off the main unit power switch after use

With optional UT-122

D u a l w a t c h , w i d e b a n d r e c e i v e r D u a l w a t c h , w i d e b a n d r e c e i v e r

D-STAR DV receiveWith optional UT-118


7/16

Ultra wideband coverageThe IC-R1500 covers 0.013299.999MHz*1 in

AM, FM, SSB and CW mode.

*1 Frequency range differs depending on version.

Remote control headThe IC-R1500 is supplied with a remote con-

trol head and 3.4m (11.2ft) separation cable for

mobile and/or base station operation. It pro-

vides a variety of mounting possibilities in var-

ious places. In addition, green, amber and yel-

low backlit colors are selectable.

Optional DSP capabilityWhether you are into weak signal work or youhave noise from your vehicle ignition, the option-

al DSP unit, UT-106, will help. The noise reduc-

tion and auto notch filter functions are the key to

pulling a radio signal out of the noise.

CTCSS, DTCS tone squelchThe CTCSS and DTCS tones provide quiet

stand-by while waiting for a matching tone sig-

nal. And the pocket beep function alerts you

with a beep when a signal with a matching

tone is received.

1000 alphanumeric memorychannels1000 on-board memory channels at the touch of

a button! With Icoms Dynamic Memory Scan,

DMS, you have a versatile memory channel

management system at your command. The

1000 memory channels can be arranged by ser-

vice or personal preference in the 21 memory

banks. Selectively link channels together to

scan depending on your needs. Programming

the memory channels and 6 character memory

names is simple with your PC.

60 channels per second scanQuickly scan through a band with the IC-

R1500s 60 channel/second scan rate*2.

Program, priority scan and other scanning

modes are available.

*2 When tuning step is less than 100kHz in program scan mode.

Other features VSC (Voice squelch control) opens the squelch

only when a modulated signal is detected

IF filter selection for changing IF filter width

IF shift function (SSB, CW mode only)

Noise blanker eliminates pulse type noise

such as engine ignition noise (SSB, CW, AM

mode only)

20dB (approx.) RF attenuator (below 1300MHz)

Weather alert function (USA/Canada versions only)

AFC function follows the received signal

when its frequency drifts in FM mode (BW:

6kHz or 15kHz)

30 min 2 hour auto power off timer

Fast/slow AGC setting

Short/long squelch delay

PC control software is supplied (See the P

control page for details)

Supplied accessories AD-113A/E* Controller cable, 3.4m; 11.2ft Antenna

USB cable Software CD Controller head

* This receiver consumes vehicle battery power in stand-by mod

We advise you to turn off the main unit power switch after use

W i d e b a n d m o b i l e r e c e i v e r w i t h r e m o t e c o n t r o l h e a dW i d e b a n d m o b i l e r e c e i v e r w i t h r e m o t e c o n t r o l h e a d


8/16

Multi-function receiver screen

USB connection PC receiverThe supplied PC control software with the IC-

R2500 and IC-R1500 turns your PC into a

wideband receiver. Just connect it to the USB

port on your PC. All functions can be con-

trolled on your desktop and the received sig-

nals can be heard through your computers

audio system via USB cable.

3 interface screens to choose from

Choose the look you want from three user inter-face screens. Multi-function receiver,

Component and Simple screen are selectable.

Multi channel monitor functionYou can monitor up to

25 channels. The soft-

ware tracks the chan-

nel activities with S-

meter levels as status

for each channel is

visually displayed by

three background col-

ors. Simply click the busy channel and the IC-

R2500/R1500 tunes to the active channel.

Recording functionYou can record audio in WAV format directly

through the USB port. Skip the hours of chan-

nel inactivity with the softwares remote control

function which pauses and resumes recording

according to the channel activity. You can also

adjust the

s a m p l i n g

rate.

Band scope and time-line scopeAlong with a 5MHz (Max.) wide range band

scope*1, the new time-line scope allows you to

observe band conditions within a specified time

period (3 to 100 minutes). In addition, the sweep

data can be stored on your PC for future use.

*1 AF output is not emitted when setting the band scope range

between 500kHz and 5MHz or setting in CW or SSB mode.

DTMF remote control capabilityNot only display the message, but also exe-

cute a PC program or sound a beep when

receiving a matching DTMF code*2.

*1

Optional UT-108 DTMF decoder is required for the IC-R2500 sub-band.

These great features too S-meter squelch releases the AF mute on

when signals stronger than the pre-set Smeter level are received.

Auto memory write scan stores detected fre

quency and mode into the PC memory.

Up to 2600 memory channels per file

IC-R2500/IC-R1500 PC requirements

Microsoft

Windows Vista

and Windows

7/XP/200ME/98SE

USB 1.1 or 2.0 Intel PentiumIII 450MHz or faster

(Pentium4 recommended) Hard disk with at least 50 MB of free disk space At least 128 MB of memory

(256MB or more recommended) Display with 1024 768 pixel resolution, high colo CD-ROM or DVD drive is required for software in-

stallation Additional hard disk space is required for recordin

sound or storing scope dataPlease note: USB audio dropouts or gaps may occubecause of a lack of PC power

Simple screen

Component screen

Tool bar

PC control software for IC-R2500 & IC-R1500

Multi-function receiver screen

Simple screen

Tool bar

Component screen


9/16

0.150 3304.999MHz coverage*1COMMUNICATIONS RECEIVER

Scan, monitor, record!

2 for 1, Dualwatch receiveUntil the IC-R20, the capability of monitoring

two frequencies required two radios. Whether

you need to monitor local public safety, air traf-

fic control, or listen-

ing to two drivers at

the track, even lis-ten to play by play

from both TV and

radio!

Shortwave to microwave,Wideband coverageThe IC-R20 covers 150kHz to 3304.999MHz*1

in SSB, CW, AM, FM and WFM modes. When

receiving in dualwatch, the combination of chan-

nels is limited to 150kHz to 469.999MHz (VFO A)

and 118MHz to 174.999MHz or 330MHz to

1304.999MHz in AM, FM, WFM modes (VFO B).

*1 Depending on version, U.S.A. version is cellular blocked.

4-hour digital recorderThe IC-R20 has an internal 32MB digital

recorder capable of storing received communi-

cations. This feature is useful in a variety of

ways, like recording wireless microphone audio

at a meeting.There is also a USB port to down-

load to a computer

for storage or to for-

ward to a friend. (PC

playback not possible)

Alphanumeric memory channelsWith 1,000 regular memory channels, 200

automatic memory scan channels and 25 pairs

of frequency scan edges, the IC-R20 makes iteasy to identify received signals with the capa-

bility of assigning a name to each channel.

CTCSS, DTCS tone signalingWhen multiple users share the same channel,

they must use specialized signaling to reduce

interference from other users. The two popular

signaling formats, CTCSS and DTCS, are stan-

dard in the IC-R20.

11 hours of continuous receive*2

Icoms energy efficient design allows the IC

R20 11*2 hours of continuous reception fro

the internal Li-Ion battery pack. Also, the IC

R20 can operate with 3 AA Alkaline cells fo

longer operation. Charging of the internal ba

tery pack is possible from either an optional ciarette lighter cable or the supplied AC adapte

*2 Single receive in FM mode at Max. AF audio.

See your signalsSometimes hearing a signal is not enough, s

the IC-R20 includes a band scope. The ban

scope enables you to see signals around

monitored frequency. An additional function

the band scope is the ability to hear the sign

while sweeping a

range, so you can

see if the signal is

modulated.

Scan featuresThe IC-R20 is Icoms fastest receiver with 100channels per second scanning speed. You ca

tag memory channels into dynamic bank

ranging from a maximum of 100 channels pbank (Max. 26 banks) as well as link multip

banks for customized memory bank scannin

Additionally, the IC-R20 offers multiple scannincontrols such as scan delay and scan resum

for received signal notification. *3 In VFO mode.

Other superior features... VSC (Voice Squelch Control) opens the squelc

only when a modulated signal is detected.

Offset monitor capability Auto squelch and squelch monitor capability

Built-in attenuator and RF gain control

Noise blanker, ANL (Auto Noise Limiter), AF filt

AFC (Auto Frequency Control) function

PC remote control capability with optional CT-1

Built-in ferrite bar antenna for AM broadcas

FM earphone cord antenna capability

Dial speed-up function

Auto power off and power save functions

Reversible rotary selector and up/down button

Weather channel* (* U.S.A. version only)

Preprogrammed TV and shortwave channel


10/16

0.150 1300.000MHz coverage*

Menu-driven user interface andeasy-to-see category iconsThe IC-RX7 hasa menu driven

user interface

that allows intu-

itive user-friendlyoperation. The 4-

way cursor but-tons provide quick navigation to menus and

settings.

One-touch search buttonThe channel modeand channel step are

preprogrammed for

each frequency

range. Easily detectsnew active channels within a designated fre-

quency range or fixed category with a push of

the Search button. The auto memory writefunction automatically stores detected chan-

nels in your memory.

One-Touch Scan ButtonThe IC-RX7 comes with preset memory chan-nels* for ham radio, air band, railroads, auto

racing, and more. Select your desired listening

subject and, with the push of the Scan button,

the IC-RX7 will automatically find active chan-nels within that area of interest. The link scan

dynamically adds and deletes a category or a

group to the scan list, even while scanning.* Depending on version.

Efficient 3-level memorymanagementA total of 1600 memory channels can be clas-

sified in 3 levels: by Category (up to 26 cate-

gories), by Group (up to 100), and Memoryname (up to 100).

Computer programmable witoptional CS-RX7 softwareWith the optional CS-RX7 software, the programming and cloning of the IC-RX7 is

breeze. Connect the IC-RX7 to your PC an

you can update or customize channel name

scan lists and more.

0.1501300MHz wide frequencycoverage* Cellular blocked in the USA version.

Slim, stylish and light weightOnly 23 mm (

29/32 in) slim depth and weighin

just 200g (7.1oz (approx) with BP-244 and antenna)

Tone control function and audifilterThe tone control function adjusts the soun

quality easily. It allows you to boost or cut bas

and treble respectively. When used with extenal headphones, you can enjoy high-quali

WFM sound. The built-in audio low pass filte

suppresses high audio frequencies to reducdistortion and noise.

* AM/WFM mode only

These excellent features 8 hours* of continuous receive capability wit

BP-244 battery pack* Backlight off, rated audio output power.

Splash resistant construction equivalent

IPX4 Large, backlit full dot-matrix display

High speed scan and high speed search (10channel/second) CTCSS/DTCS decode with pocket beep func

tion

VSC (Voice Squelch Control)

Built-in RF-gain control and attenuator Built-in AM bar antenna

Earphone antenna function for FM broadca

RX VFO mode operation

CI-V PC remote control capability with optio

al CT-17 Weather alert function (USA version only)

Auto power save function

DC power jack for external DC operation

Slim and smart wideband receiver


11/16

100kHz1309.995MHz*wideband coverageWhile the IC-R6 receives an ultra wideband fre-quency range, the radio provides superior sen-

sitivity and receiver characteristics that is

insusceptible to interference. Amateur stations,

AM, FM, short wave broadcasts, TV audio* anda variety of utility communications can be

caught and listened to.* Frequency range depends on version. Analog TV audio

only. Cannot decode digital TV audio.

100 Ch/Sec. high speed scanThe IC-R6 has 100 channels per second high

speed scan capability*. This superior scanning

power allows the utmost efficiency when

searching over 1300MHz of spectrum!* VFO mode scanning.

15 hours of continuous receivecapability*The IC-R6 is energy-efficient, designed to pro-

vide many hours of listening enjoyment on a sin-

gle charge. With the supplied rechargeable Ni-

MH cells (1400mAh 2), the IC-R6 provides up to

15 hours of continuous receive capability*.* At 50mW output using external speaker.

1300 memory channels with 22memory banksWith 1300 alphanumeric memory channels, 50

scan edges and 200 auto write memories, theIC-R6 gives you flexible scanning. Use the

bank link scan feature to choose from and con-

nect any of the 22 memory banks.

Multiple power choicesThe IC-R6 can be powered by rechargeable Ni-MH cells, or with alkaline batteries. Run the IC-

R6 using the AC adapter, BC-196SA/SD, or opt

for a cigarette lighter cable, CP-18A/E. Whenused the optional drop-in charger stand BC-

194 and the AC adapter or cigarette lighter

cable, you can easily start charging the Ni-MHcells, while on the move.

CI-V remote control capabilityWhen used with the optional CT-17 CI-V remote

controller, the IC-R6 can be controlled from a

PC.You can change frequencies, mode, volumelevel, etc,.

VSC (Voice Squelch Control)The VSC opens the squelch only when a mo

ulated signal is detected and ignores unmod

lated beat noise. It is a handy feature for thoslisteners who are scanning for talk, news an

music, but not data bursts or beacons.

More outstanding features... Built-in audio low pass filter

1.0ppm high frequency stability (at 25C) Earphone cord antenna for AM aviation a

well as FM broadcast

Ferrite bar antenna for AM broadcast 150mW loud audio with internal speaker

DTCS and CTCSS tone squelch and revers

tone squelch Priority watch function with priority beep

PC programmable with optional CS-R6

Receiver-to-receiver cloning (optional OPC474 required)

Auto power OFF (0.52 hours and end

busy signal) Compact, drip-resistant construction Duplex operation monitoring

Automatic LCD backlight

Dial speed acceleration Built-in RF attenuator

Auto memory write scan stores the detecte

frequency, mode and tone into a specifiememory

Reversible up/down buttons and dial knob f

volume, frequency, memory channel, scadirection and set mode settings

Weather channel receive with weather alert

(USA version only)

Icoms fastest scanning

wideband portable receiver

BC-196SA/SD

or CP-18A/E

DC power

jack

Charger stand

BC-194


12/16

: Applicable : Not applicable

CIGARETTELIGHTER CABLE

OPTIONS FOR MOBILE RECEIVERS

MODEL NAME

AC ADAPTER

CP-12L OPC-254LSP-10

DC POWER CABLE

OPC-11563.5m;11.5ft

MB-120MB-84

IC-R2500

IC-R1500

CONTROLLER BRACKETS MOUNTING BASE EXTENSION CABL

MB-58

*3

*3

AH-8000

1003335MHz

EXTERNALANTENNAEXTERNAL SPEAKER

*2 AD-113S USA version and Europe version available.

*3 The AH-8000 has a Type-N connector. Please arrange a separate antenna connector adapter.

AD-113*2

(Use with MB-84)

(Use with MB-58)

approx

.24.5

m;80.

3ft

30 m; 98.4 ft

OPTIONS FOR BASE RECEIVERS

MODEL NAME

AC ADAPTER

CI-V CONVERTER

IC-R8500

IC-R75

SP-20 SP-21 SP-23

CT-17MODEL NAME

REMOTE CONTROL SOFTWARE

IC-R75

RS-R75 RS-R8500

AH-710

1.930MHz

CR-282

0.5ppm

CR-293

0.5ppm

UT-102 UT-106

HIGH STABILITY CRYSTAL UNITS

MODEL NAME

9MHz FILTERS

IC-R9500

IC-R8500

IC-R75

FL-100CW/RTTY narrow;500Hz/6dB

FL-101CW narrow;250Hz/6dB

FL-103SSB wide;2.8kHz/6dB

FL-223SSB narrow;1.9kHz/6dB

FL-232CW/RTTY narrow;350Hz/6dB

VOICE SYNTHESIZER DSP UNIT

455kHz FILTERS

FL-52ACW/RTTY narrow;500Hz/6dB

FL-53ACW narrow;250Hz/6dB

FL-222SSB narrow;1.8kHz/6dB

FL-257SSB wide;3.3kHz/6dB

AD-55*1 AH-8000

1003335MHz

EXTERNAL ANTENNAS

DC POWER CABL

CARRYING HANDL

IC-MB5 MB-12 MB-23

OPC-023

MOBILE BRACKETS

* Some options may not be available in some countries. Please ask your dealer for details.

EXTERNAL SPEAKERS

UT-122

P25 DIGITAL UNIT

IC-R9500

IC-R9500

IC-R8500

(One of these 9MHz filters)





(One of these 455kHz filters)



(One of these 455kHz filte

*1 AD-55S USA version and Europe version available.


13/16

OPTIONS FOR HANDHELD RECEIVERS

MODEL NAME

BATTERY ASSEMBLY BATTERY CASE AC ADAPTER CHARGER STANDBATTERY PACK

IC-RX7

IC-R6

IC-R20

MODEL NAME

CARRYING CASES

IC-RX7

IC-R6

IC-R20

LC-158LC-146A LC-170 OPC-474Receiver-to-receiver

OPC-478Receiver to PCRS-232C cable

MODEL NAME

ANTENNA ADAPTER

IC-R6

IC-R20

CI-V CONVERTER

BP-206 (Li-Ion)3.7V/1920mAh (min.)

2100mAh (typ.)

BP-244 (Li-Ion)3.7V/1100mAh (min.)

1150mAh (typ.)

BP-2623 LR6 (AA) cells

CT-17

CS-RX7*7

With USB cableCS-R6*7 CS-R20*7

With USB cable

CP-18A/E CP-23L

SP-13 SP-27Tube earphone

HP-4 MB-112G

EARPHONES HEADPHONE BELT CLIP

CLONING CABLES

AD-92SMABNC to SMA

BC-153SA/SEWALL CHARGER

CLONING SOFTWARE

BC-156*5

RAPID CHARGERBC-196SA/SD*6 BC-194

CHARGERS

* Some options may not be available in some countries. Please ask your dealer for details.

: Applicable : Not applicable

IC-RX7

DTMF DECODER UNIT

UT-108

OPTIONS FOR MOBILE RECEIVERS

UT-106

DSP UNIT

MODEL NAME UT-118 UT-122

IC-R2500

IC-R1500

D-STAR DIGITAL UNIT P25 DIGITAL UNIT

*4 Either of UT-108 or UT-118 can be installed.

* Some options may not be available in some countries.Please ask your dealer for details.

OPC-478UCReceiver to PCUSB cable

*4

*4

Applicable U.S. Military SpecificationsIcom makes rugged products that have beetested to and passed the MIL-STD requirments and strict environmental standards fshock (MIL-810C, D, E or F) and vibration (MI810C, D, E or F).Look for this logo to determine which mode

meet these requirements.

CIGARETTE LIGHTER CABLE

(Use with BC-156)

(Use with BC-196 or CP-18)

*5 BC-156 USA/Europe versions available.

*6 BC-196SA/SD for exclusive use with the IC-R6 and BC-194 only.

*7 Windows 7 compatible


14/16

SPECIFICATIONS FOR BASE RECEIVERS

IC-R8500 IC-R75IC-R9500

All stated specifications are subject to change without notice or obligation.

IC-R8500 is for sale in the US to qualifying agencies or export only.If re-exporting the IC-R9500, it is your responsibility to check you are in compliance with the export regulations of your country or the country you are exporting to.Export regulations can be highly restrictive in relation to some of the technology implemented in this product.Your failure to comply with export regulations may subject you to fines or penalties. Please consult with the relevant Government Department in your country.

*1 USA version: 0.005821.999, 851866.999, 8963335MHz. *2 TV tuner is not available in the USA version except for export or to authorized government users. *3 One each for 301149.999MHz, 11503335M* The LCD display may have cosmetic imperfections that appear as small or dark spots. This is not a malfunction or defect, but a normal characteristic of LCD displays.

30kHz60MHz

Guaranteed range 0.129.99 and 5054MHz

USB, LSB, CW, RTTY, AM, FM

7ppm(25C; from 1 min. to 60 min. after power ON)

1.1A at 13.8V DC

13.8V DC 15% or117, 220, 240V AC with AD-55

SO-239 (50)500 terminals

101

(including 2 scan edges)

24194229 mm;912311169132 in

3.0kg; 6.6lb

SSB, CW, RTTY:0.11.8MHz 2.0V (Preamp OFF)1.829.99MHz 0.16V (Preamp1 O5054MHz 0.13V (Preamp2 O

AM:0.11.8MHz 5.6V (Preamp OFF)1.829.99MHz 1.6V (Preamp1 ON5054MHz 1.0V (Preamp2 ON

FM:2829.99MHz 0.22V (Preamp1 O5054MHz 0.2V (Preamp2 ON

SSB, CW, RTTY: 2.1kHz/6dB4.0kHz/60dB

AM: 6.0kHz/6dB20kHz/50dB

FM: 12kHz/6dB30kHz/50dB

More than 70dB(Except IF point and 50MHz band)

2.0W with an 8 load

2-conductor 3.5 (d) mm (18)/8

0.11999.99999MHz

Guaranteed range 0.11000, 12401300MHz

USB, LSB, AM, AM-N, AM-W, CW,CW-N*, FM, FM-N, WFM* Optional CW narrow filter required.

100Hz (below 30MHz)3ppm (above 30MHz)

2.0A at 13.8V DC

13.8V DC 15% or117, 220, 240V AC with AD-55

SO-239 (50 for HF)Phono (RCA: 500 for HF)Type-N (50 for above 30MHz)

1021

(including 20 scan edges, 1 priority)

287112309 mm;115164133212532 in

7.0kg; 15.4lb

SSB, CW, RTTY:0.10.5MHz 1.0V0.51.8MHz 2.0V1.82.0MHz 0.25V2.030MHz 0.2V301000MHz 0.32V12401300MHz 0.32V

AM: 0.10.5MHz 6.3V0.51.8MHz 13V1.82.0MHz 3.2V2.01000MHz 2.5V12401300MHz 2.5V

AM-N: 1.82.0MHz 2.5V2.01000MHz 2.0V12401300MHz 2.0V

AM-W: 301000MHz 3.2V12401300MHz 3.2V

FM: 281000MHz 0.5V12401300MHz 0.5V

WFM: 301000MHz 1.4V12401300MHz 2.0V

SSB, AM-N, RTTY: 2.2kHz/6dBAM, FM-N: 5.5kHz/6dBAM-W, FM: 12kHz/6dBWFM: 150kHz/6dB

More than 60dB (1.830MHz)50dB typical (above 30MHz)

2.0W with an 8 load


0.0053335.000000MHz*1

USB, LSB, CW, FSK, AM, FM, WFM, P25*TV*2(NTSC M, PAL B/G, PAL I, PAL D and SECAM K)* Optional UT-122 required.

0.05ppm(25C; after 5 min. warm up)

100VA (Power consumption)

100, 120, 230, 240V AC

SO-239 (50 for HF)Phono (RCA: 500 for HF)Type-N 2 (50*3)

1220(including 100 auto memory write,

100 memory scan skip and 20 scan edges)

424149340 mm;1611165781338 in

20kg; 44.1lb

SSB, CW, FSK (BW=2.4kHz):0.11.799MHz 0.5V (Preamp1 ON)1.829.999MHz 0.2V (Preamp1 ON)302999.999MHz 0.32V (Preamp ON)30003335MHz 1.0V (Preamp ON)

AM (6.0kHz):0.11.799MHz 6.3V (Preamp1 ON)1.829.999MHz 2.5V (Preamp1 ON)302999.999MHz 3.5V (Preamp ON)30003335MHz 11V (Preamp ON)

FM (15kHz):2829.999MHz 0.5V (Preamp1 ON)

302999.999MHz 0.5V (Preamp ON)30003335MHz 1.6V (Preamp ON)

FM50k (50kHz) :2829.999MHz 0.71V (Preamp1 ON)302999.999MHz 0.71V (Preamp ON)30003335MHz 2.2V (Preamp ON)

WFM (180kHz):302999.999MHz 1.4V (Preamp ON)30003335MHz 4.5V (Preamp ON)

SSB, FSK: 2.4kHz/3dB

(BW=2.4kHz*) 3.6kHz/60dBCW (500Hz): 500Hz/3dB

700Hz/60dBAM (6kHz): 6.0kHz/3dB

15.0kHz/60dBFM (15kHz): 12kHz/3dB

25kHz/60dB

WFM: 180kHz/6dB*variable between 50Hz and 3.6kHz

More than 70dB (0.130MHz)More than 50dB (302500MHz)More than 40dB (25003000MHz)

2.6W with an 8 load


Receiver

Frequency coverage(Differs according to version)

Mode

Frequency stability

Maximum current drain

Power supply requirement

Antenna connector

Number of memory channels

Dimensions

(WHD; Projections are not included)

Weight(approx.)

Sensitivity (typical)

SSB, CW, RTTY, AM: at 10dB S/N

FM, WFM: at 12dB SINAD

Selectivity

Spurious and image rejection

AF power(at 10% distortion)

External speaker connector

General


15/16

SPECIFICATIONS FOR MOBILE AND HANDHELD RECEIVERS

IC-RX7 IC-R6IC-R20

*1USA version : 0.01809.999, 851866.999, 8961300, 1300.0000011810.999, 18521867.999, 18972305.899, 23572811.999, 28532868.999, 28983109.799, 31363154.799, 31813299.999MHz.

*2USA version : 0.150821.999, 851866.999, 8961304.999, 13053304.999MHz. *3USA version : 0.150821.995, 851866.995, 8961300MHz. *4USA version : 0.100821.995, 851866.995, 8961309.995M

*50.4951300MHz only. *6With optional UT-118 *7With optional UT-122 *8 Single receive mode, IC recorder OFF *9 Backlight OFF. *10 External SP, backlight OFF.* The LCD display may have cosmetic imperfections that appear as small or dark spots. This is not a malfunction or defect, but a normal characteristic of LCD displays.

* The IC-R2500 and IC-R1500 have stand-by power consumption that will drain the vehicle battery over a period of time.

Please turn off the main unit power switch when not using the receiver while installed in a vehicle.

All stated specifications are subject to change without notice or obligation.

0.1001309.995*4

FM, WFM, AM

1.0ppm (at 25C; +77F)2.5ppm (10C to +60C; +14F +140F on the basis of 25C; +77F)

Rated audio output*10 :130mA typ. (at 3.0V DC)

2 R6 (AA) size Ni-MH oralkaline cells

4.5V DC(with BC-196SA/SD or CP-18A/

SMA (50)

1300 memory channels,

200 auto write memory channe

and 50 scan edges

588629.8 mm;29323381316 in

200g; 7.1oz(With antenna and battery cell

FM (typical at 12dB SINAD):1.6254.995MHz 0.325.00029.995MHz 0.25 30117.995MHz 0.18118246.995MHz 0.18247469.995MHz 0.18470832.995MHz 0.328331029.995MHz 0.28

10301309.995MHz 0.35WFM (typical at 12dB SINAD

76108.000MHz 1.1V175221.995MHz 1.1V470770.000MHz 1.8V

AM (typical at 10dB S/N):0.4954.995MHz 1.3V5.00029.995MHz 0.89118136.000MHz 0.63222246.995MHz 0.63247329.995MHz 0.79

AM, FM: 12kHz/9dB30kHz/60dB

WFM: 150kHz/6dB

150mW with a 16 load (Int. SP)80mW typ. with an 8 load (Ext. S

2-conductor 3.5 (d) mm(18)/8

0.1501300.000*3

FM, WFM, AM

6ppm(10C to +60C; +14F to +140F)


BP-244 or, 3 LR6 (AA)alkaline cells with BP-262

6.0V DC(with BC-153 or CP-18A/E)

SMA (50)


200 auto write memory channels,

and 25 scan edges

5712823 mm;21451322932 in

200g; 7.1oz(With antenna and BP-244)

FM (at 12dB SINAD):1.6254.995MHz 0.56V5.000246.995MHz0.4V247832.995MHz 0.56V8331300.000MHz 0.79V*

(* USA version only

851866.995MHz 1.26V

8961300.000MHz 0.79V)

WFM (at 12dB SINAD):76108.000MHz 1.8V175221.995MHz 1.8V470770.000MHz 2.5V

AM (at 10dB S/N with externalantenna):

0.4954.995MHz 2.5V5.00029.995MHz 1.8V118136.000MHz 1.8V222246.995MHz 1.8V247329.995MHz 1.8V


WFM: 150kHz/6dB

60mW with an 8 load


0.1501304.999,13053304.999*2

(VFO A): 0.150469.999

(VFO B):118174.999, 3301304.999

FM, WFM, AM, USB*, LSB*, CW*

* 0.150469.999MHz only.

6ppm(10C to +60C; +14F to +140F)


BP-206,3 LR6 (AA) alkaline cells

6.0V DC(with BC-153 or CP-18A/E)

BNC (50)


200 auto writememory channels,

and 50 scan edges

6014234.8 mm;23851932138 in

320g; 11.3oz(With antenna and BP-206)

FM (at 12dB SINAD):1.6204.999MHz 0.56V5.000221.999MHz0.4V330832.999MHz 0.56V8331304.999MHz 0.71V13302304.999MHz 5.6V23302999.999MHz 18V

WFM (at 12dB SINAD):

76108.000MHz 1.8V175221.999MHz 1.8V470769.999MHz 2.5V

AM (at 10dB S/N):0.4954.999MHz 2.2V5.00029.999MHz 1.4V118135.999MHz 1.4V

SSB, CW (at 10dB S/N):0.4954.999MHz 0.4V5.00029.999MHz 0.25V5053.999MHz 0.25V118146.999MHz 0.25V330469.999MHz 0.32V


WFM: 150kHz/6dBSSB, CW: 1.8kHz/6dB

100mW typ. with an 8 load


Receiver

Frequency coverage(Differs according to version,

Unit: MHz)

Mode

Frequency stability

Current drain

Battery pack or cells

Power supply

requirement

Antenna connector

Number of memorychannels

Dimensions

(WHD; Projections are not included)

Weight (approx.)

Sensitivity(less than, except spurious points)

Selectivity

AF power(at 10% distortion)

External speaker

connector

General

IC-R2500 IC-R1500

0.0103299.999*1

Guaranteed range 0.4953000

FM, WFM, AM, SSB*5, CW*5

3ppm (Controller operation,10C to +60C; +14F to +140F)

1.25A

12.0V DC 15%

BNC (50)

Controller operation: 1000

PC operation: Unlimited(2600 channels/file)

Main unit: 14641206 mm;534158818 in

Controller: 1114026.5 mm;43819161132 in

Main unit: 1.2kg; 2.6lbController: 200g; 7oz

FM (12dB SINAD) :2849.999MHz 0.63V50699.999MHz 0.5V7001300.000MHz 0.63V13002299.999MHz 5.6V23003000.000MHz 18V

WFM (12dB SINAD):50699.999MHz 1.4V

7001300.000MHz 1.8V13002299.999MHz 18V23003000.000MHz 56V

AM (10dB S/N) :0.4951.799MHz 25V1.849.999MHz 2.5V50699.999MHz 2.0V7001300MHz 2.5V

SSB, CW (10dB S/N):0.4951.799MHz 5.0V1.849.999MHz 0.5V50699.999MHz 0.4V7001300MHz 0.5V

SSB, CW, AM: 2.8kHz/6dBAM, FM, SSB, CW:

6.0kHz/6dBAM, FM: 15kHz/6dB

AM, FM, WFM:50kHz/6dBWFM: 230kHz/6dB

500mW with an 8 load


Main band: 0.0103299.999*1

Sub band: 501300*1

Guaranteed range 0.4953000

Main band: FM, WFM, AM,SSB*5, CW*5, DV*6, P25*7

Sub band: FM, WFM, AM

3ppm (Controller operation,10C to +60C; +14F to +140F)

1.5A (Dualwatch mode)

12.0V DC 15%

BNC 2 (50)

Controller operation: 1000

PC operation: Unlimited(2600 channels/file)

Main unit: 14641206 mm;534158818 in

Controller: 1405027.5 mm;512131321332 in

Main unit: 1.35kg; 3lbController: 250g; 8.8oz

FM (12dB SINAD) :2849.999MHz 0.63V50699.999MHz 0.5V7001300.000MHz 0.63V13002299.999MHz 5.6V23003000.000MHz 18V

WFM (12dB SINAD) :50699.999MHz 1.4V

7001300.000MHz 1.8V13002299.999MHz 18V23003000.000MHz 56V

AM (10dB S/N) :0.4951.799MHz 25V1.849.999MHz 2.5V50699.999MHz 2.0V7001300MHz 2.5V

SSB, CW (10dB S/N):0.4951.799MHz 5.0V1.849.999MHz 0.5V50699.999MHz 0.4V7001300MHz 0.5V

SSB, CW, AM: 2.8kHz/6dBAM, FM, SSB, CW:

6.0kHz/6dBAM, FM: 15kHz/6dB

AM, FM, WFM: 50kHz/6dBWFM: 230kHz/6dB

500mW with an 8 load



16/16

1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013Count on us

www.icom.co.jp/world

2380 116th Avenue NE,Bellevue, WA 98004, U.S.A.Phone : +1 (425) 454-8155Fax : +1 (425) 454-1509E-mail : [email protected] : http://www.icomamerica.com

Unit 1 / 103 Garden Road,Clayton, VIC 3168 AustraliaPhone : +61 (03) 9549 7500Fax : +61 (03) 9549 7505

Blacksole House, Altira Park,Herne Bay, Kent, CT6 6GZ, U.K.Phone : +44 (01227) 741741Fax : +44 (01227) 741742E-mail : [email protected] : http://www.icomuk.co.uk

Zac de la Plaine,1 Rue Brindejonc des Moulinais, BP 45804, 31505 Toulouse Cedex 5, FrancePhone : +33 (5) 61 36 03 03Fax : +33 (5) 61 36 03 00E-mail : [email protected] : http://www.icom-france.com

Ctra. Rubi, No. 88 "Edificio Can Castanyer"Bajos A 08174, Sant Cugat del Valles,Barcelona, SpainPhone : +34 (93) 590 26 70

146A Harris Road, East Tamaki,Auckland, New ZealandPhone : +64 (09) 274 4062Fax : +64 (09) 274 4708E-mail : [email protected] : http://www.icom.co.nz

Glenwood Centre #150-6165 Highway 17,Delta, B.C., V4K 5B8, CanadaPhone : +1 (604) 952-4266Fax : +1 (604) 952-0090E-mail : [email protected] : http://www.icomcanada.com

Your local distributor/dealer:6F No. 68, Sec. 1 Cheng-Teh Road,Taipei, Taiwan, R.O.C.Phone : +886 (02) 2559 1899Fax : +886 (02) 2559 1874E-mail : [email protected] : http://www.asia-icom.com

10C07, Long Silver Mansion, No.88, Yong DingRoad, Haidian District, Beijing, 100039, ChinaPhone : +86 (010) 5889 5391/5392/5393Fax : +86 (010) 5889 5395E-mail : [email protected] : http://www.bjicom.com

81-850 Sopot, ul. 3 Maja 54, PolandPhone : +48 (58) 550 7135Fax : +48 (58) 551 0484E mail : icompolska@icompolska com pl

Communication EquipmentAuf der Krautweide 2465812 Bad Soden am Taunus, GermanyPhone : +49 (6196) 76685-0Fax : +49 (6196) 76685-50E-mail : [email protected] : http://www.icomeurope.com

FUNCTIONS COMPARISON CHART

IC-R9500 IC-R8500 IC-R75

*1 Frequency range shows working range. Some frequency ranges are not guaranteed. Cellular bands are blocked in the USA version. *2 Scan speed differs depending on operating conditions.

*3 Depending on version. *4 2600 channels per file, 26 banks, when used with a PC. *5 Up to 26 category, up to 100 group and up to 100 memory name. *6 10Hz, when used with the controller.

*7 Windows7 compatible. *8 UT-108 is required for sub-band.

5kHz

3335.000MHz

(With UT-122)

*3

1220

13

1Hz

CT-17

(IF DSP)

(DSP filter)

50 ch/sec.

100kHz

1999.999MHz

1021

20

IF shift

10Hz

(With RS-R8500)

RS-R8500

CT-17

40 ch/sec.

30kHz

60.000MHz

101

1Hz

(With RS-R75)

RS-R75

CT-17

(With UT-106)

(With UT-106)

UT-106

20 ch/sec.

IC-R20

150kHz

3304.999MHz

1250

26

10Hz

CS-R20*7

CT-17

100 ch/sec.

IC-R6

100kHz

1309.995MHz

1550

22

5kHz

CS-R6*7

CT-17

100 ch/sec.

IC-RX7

150kHz

1300.000MHz

1825

226*5

5kHz

CS-RX7*7

CT-17

100 ch/sec.

IC-R2500

10kHz

3299.999MHz

(With UT-122)

(With UT-118)

1000 (with controller)*4


(With PC)

IF shift (With PC)1Hz(With PC)*6

(With PC) (With PC)

*7

*7

(With UT-106)

(With UT-106)

UT-106

(With PC)*8

60 ch/sec.

IC-R1500

10kHz

3299.999MHz



(With PC)

IF shift (With PC)1Hz(With PC)*6

(With PC) (With PC)

*7

*7

(With UT-106)

(With UT-106)

UT-106

(With PC)

60 ch/sec.

Frequency coverage*1

Low band edge

HF

50MHz

144MHz430/440MHz

800MHz*1

1200MHz

2400MHz

High band edge

FM, AM, WFM

SSB, CW

S-AM

P25

D-STAR DV

TV (Image)

Memory channels

Memory banks

10-key pad

Pass band tuning

Minimum tuning step

8.33 tuning step

Dualwatch

Band scopeRecorder

PC control software

PC cloning

USB connector

CI-V connection

Auto frequency control

Auto notch

Noise blanker

Noise reduction

Voice squelch control

DSP

DTMF decoder

Optional filter

Tone squelchDTCS squelch

Weather alert

Diversity antenna

AM bar antenna

FM earphone antenna

Scan speed (Max.)*2

Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or

subsidiaries in the United States and in other countries. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spa

Russia, Japan and/or other countries. All other trademarks are the properties of their respective holders.

i com receivers catalog 2010

Documents