hyupjin’s spring finger contacthyupjin21.co.kr/spring_finger_contact.pdf · feature of box type...
TRANSCRIPT
HYUPJIN’s Spring Finger Contact
Where spring finger contact used for?
▶ Usages : Electronic Device interconnecting RF module with Main
Board on Mobile & IT Machine
▶ Connecting RF Module to PCB in an effective way
▶ Application : All IT machines such as Mobile Phone, Wearable Dev.
Main Board on Smart Phone
+ RF Antenna
Antenna & Sub Board
+ Main Board
seperated connected
Product Image ( Line up )
Note - Material : Ti - Cu Alloy - Plating : Au Over Ni , Pd-Ni Over Ni _ (Selective Plating) - Thickness : t0.08 ~ t0.15
- Rated Voltage : 30V AC/DC - Rated Current : 2.0A / pin
Robust Type Wall Type Conventional Box Type Finger Type
Height (mm)
3.0
2.0
1.0
~Y 2011 Y 2012 Y 2013 Y 2014 Y 2015 Year
Wireless Charging
Prevent Deformation
Ni-Barrier
“0” Height
Robust Type
Box Type SIDE Contact
Wearable Contact
Pogo Type
Spring finger contact Load-Map
Conventional Type
Finger Type
Y 2016
Array Type
Spring Contact
rigidity cost saving
Conventional Wall Box
Prevent from contact part deformation
Diminish SMD error
Hook + prevent from bending part cave in
Diminish SMD error
WALL (Deformation Prevention)
Stopper (Bumper)
HOOK function (free from lifting)
BENDING protection (free from cave-in)
Progress of Spring finger contact
HOOK function (free from cave-in)
Robust Type Box Type
Needs
Less room for SMD Tightened SMD Space
Slim
Deformation prevention
Cost saving
Apply
Smaller & lighter (L:2.2mm_W:1.0mm)
Low profile (0.9/1.1 Height)
Half Box Type Box Type
Partial Ni plating (Ni-Barrier)
Function of Spring finger contact
Feature of Box Type Spring Finger Contact
◈ Robust Type ( no lifting & no cave in ) + minimized the length (2.2mm)
Latch applied for not being lifted from contact part
catching
Applied latch type stopper to prevent from rear u-bending deformation
2.2mm
Line up
Conventional Type
H(mm) L(mm) W(mm) Working Range (mm)
HJ-ICT-06YN 1.3 3.0 1.5 0.6
HJ-ICT-03YN 1.5 3.0 1.5 0.6
HJ-ICT-05YN 1.5 3.0 2.0 0.6
HJ-BCT-02YN 2.0 3.5 1.5 0.6
HJ-BCT-04YN 2.5 4.2 1.5 1.1
HJ-BCT-2.8Y 2.8 4.2 1.5 1.1
HJ-BCT-09Y 3.47 4.5 1.5 0.65
HJC-BCT01Y 3.9 5.5 1.5 1.0
SizeImage Part No
Box Type
H(mm) L(mm) W(mm) Working Range (mm)
CS-076B 2.8 2.5 1.3 0.85
CS-077B 3.2 2.5 1.3 0.85
SizeImage Part No
Line up
Wall Type
H(mm) L(mm) W(mm) Working Range (mm)
HJ-ICT-1.1DP-NB 1.1 2.8 1.0 0.6
HJ-1115-NB 1.1 2.8 1.5 0.6
CS-052A 1.1 2.8 1.0 0.6
HJ-ICT-1.3DP-NB 1.3 2.8 1.0 0.6
HJ-1315-NB 1.3 2.8 1.5 0.6
CS-053A 1.3 2.8 1.0 0.6
HJ-ICT-1.5DP-NB 1.5 3.2 1.5 0.6
CS-054A 1.5 2.8 1.0 0.6
CS-055A 1.6 3.2 1.5 0.6
HJ-ICT-1.75DP-NB 1.8 3.2 1.5 0.7
HJ-2015-NB 2.0 3.7 1.5 0.8
HJ-2415-NB 2.4 4.4 1.5 1.0
HJ-2815-NB 2.8 4.4 1.5 1.0
HJ-3215-NB 3.2 4.7 1.5 1.0
HJ-3615-NB 3.6 4.7 1.5 1.0
HJ-4015-NB 4.0 5.0 1.5 1.0
SizeImage Part No
Line-up
Robust Type
H(mm) L(mm) W(mm) Working Range (mm)
CS-093A 0.6 4.0 1.1 0.3
CS-090A 0.9 2.2 1.0 0.5
CS-070A 1.1 2.2 1.0 0.6
CS-070B 1.1 2.2 1.0 0.6
CS-071A 1.3 2.2 1.0 0.6
CS-071C 1.3 2.2 1.0 0.6
CS-072A 1.5 2.2 1.0 0.6
CS-073A 1.7 2.5 1.2 0.6
CS-074A 2.0 2.5 1.2 0.7
SizePart NoImage
Line up (by heights)