hyperion led - ledluks.com · hyperion led mounting instructions 2 3 1. only competent persons are...
TRANSCRIPT
HYPERION LEDMounting instructions
54 6
1.31.2
HYPERION LEDMOUNTING INSTRUCTIONS
2 3
www.ledluks.com www.ledluks.com
1. Only competent persons are allowed to perform mounting and maintenance. 2. Before installation make sure that there is no
voltage in the network. 3. Use only original parts for repairs or maintenance. 4. Use only fixtures with proper IP protection in wet
rooms. 5. Before servicing, it is obligatory to disconnect the fixture from the network voltage. 6. Manufacturer does not guarantee
for damage caused by incorrect installation and/or use. 7. Any operation performed on the fixture that is not in accordance with
instructions will void manufacturer’s warranty.
EB DEB DALI
Safety notes
Inside the box
Electrical connection
Clean the plastic panels with damp microfiber cloth
CAREINDICATION:
1.1
1300 mm
32
HYPERION LEDMOUNTING INSTRUCTIONS
MountingMounting type 1
4x
43
4 5
www.ledluks.com www.ledluks.com
HYPERION LEDMOUNTING INSTRUCTIONS
HYPERION LEDMOUNTING INSTRUCTIONS
2.2 T1.2
2
2.1 T1.1
1
Mounting type 2 Type 1, lateral connection
Connection
CLICK CLICK
CLICK
CLICK
T1.2T1.1
Type 2, upper connection
6 7
www.ledluks.com www.ledluks.com
HYPERION LEDMOUNTING INSTRUCTIONS
HYPERION LEDMOUNTING INSTRUCTIONS
EOS LED CIRCULARMOUNTING INSTRUCTIONS
8
Ledluks d.o.o.Mednarodni Prehod 6, VrtojbaSI-5290 Šempeter pri GoriciSlovenia, EUROPE
Tel.: +386 5 393 24 [email protected]
www.ledluks.com