hydro-testing & pipe isolation services · • hydro test flange pressures up to 3000 psi •...
TRANSCRIPT
CEDA specializes in delivering hydro‐testing and pipe isolation services to clients involved in maintenance, turnaround and construction projects. CEDA’s patented tools, processes and technical services greatly reduce the test medium and subsequent labor requirements compared to traditional hydro‐test methods.
CEDA’s patented tools were designed to make hydro‐testing and pipe isolation safer and quicker. CEDA’s tools enable the hydro‐testing of vessels, flanges, welds, elbows, tees and virtually any piping system within industrial facilities at higher pressures than possible with traditional equipment.
To assist with hydro‐testing, CEDA custom‐designs and sells the SuprPump, the most reliable two stage, self‐priming high pressure pump on the market. The SuprPump is made of lightweight stainless steel or aluminum, is non‐corrosive and comes in three and five gallon sizes.
CEDA’S HYDRO-TESTING & PIPE ISOLATION TOOLS
• SuprDouble Block & Bleed Tool
• SuprNozzle Test Tool
• SuprHub Test Tool
• SuprElbow Test Tool
• SuprTee Test Tool
• SuprFlange Test Tool
• SuprPumps
HYDRO-TESTING & PIPE ISOLATION SERVICES
www.ceda.com
HYDRO-TESTING & PIPE ISOLATION SERVICES
SUPRDOUBLE BLOCK & BLEED TOOL• Isolates and vents toxic and explosive
vapours to a safe location when performing repairs or changes to any piping system
• Positive pressure to monitor isolation seals• Monitors and vents gas• Nitrogen purge capability• Hydro Tests weld sections up to 5000 psi• Lightweight Design 100ºC to 212ºF max.
temperature• Easy to install• Minimizes NDE SUPRNOZZLE TEST TOOL• Safely tests vessel nozzles without filling the entire
vessel• Self-energizing using Hydro test medium to set
seals• Means no torque or tension on vessel wall• Seals made of silicone and urethane• Up to 1000psi hydro tests• Custom built for all projects
SUPRHUB TEST TOOL• Reduces downtime and safety tests welds without
filling entire piping system• Lightweight• Aluminum/Steel design• Easy to install• Hydrotest pressures up to 9000 psi• Self-energizing• Uses test medium to set seal• Minimizes NDE
SUPRELBOW TEST TOOL• Safely tests welds without filling the entire piping
system• Lightweight Aluminum/Steel design• Hydro test flange pressures up to 3000 psi• Easy to install• Self energizing• Uses test medium to set the seal• Minimizes NDE• Raised face or RTJ
SUPRTEE TEST TOOL• Safely tests all three welds on a tee without filling
the piping system• Light weight aluminum/steel design• Hydro test weld section up to 3000psi• Easy to install• Minimizes NDE• Reduces flanges in piping systems• Reduce leak points• Minimizes welding• Self energizing• Uses test medium to set seals
SUPRFLANGE TEST TOOL• Reduces downtime and safely test welds without
filling the entire piping system• Lightweight Aluminum/Steel design• Hydro test flange pressures up to 9000 psi• Sizes 3/4” to 24”• Easy to install• Self energizing• Uses test medium to set the seal• Minimizes NDE• No need to grind down Roots• Raised face or RTJ
SUPRPUMPS• Assists with hydro testing and pipe isolation• Pressure testing made simple• Most reliable pumps in the market• Lightweight aluminum and stainless steel
construction• Non-corrosive• Custom pumps available• Can be used in a variety of applications• Two stage self priming• Low Pressure /High Volume for 0-300 psi• High Pressure /Low Volume for 0- 5000 psi• Suprpump sales (3 - 5 gal.) and custom builds