hydraulic ram unit for piling posts · 2019. 6. 29. · hre 4000 hre 6000 pb 420 pb 420...
TRANSCRIPT
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
Due to replaceable and readjustable bronze slide
rails in all mobile parts such as e.g. slide chariot
and feed pipe as well as solid hydraulic valves
“MADE IN GERMANY“ especially designed for
construction machinery a long service life is ensured.
Equipped with an optimal turn drive unit and down-
hole hammer, the machine can be modified into a
drilling truck within a short time for drilling shells at
crossings and for pile-driving
Fif..Transport position
The fully hydraulic ram HRE is based on a solid
tracked truck with live ring and rubber chains.
The drive is a Hatz two or three-cylinder Diesel
engine which has proven itself in many
construction machines. As we attach great
importance to stability, it is also possible to extract
posts and drill holes for shells. The modification
equipment for extraction consists of two drawbars,
ram block, and clamping tongs retainer with
clamping tongs.
The modification time is approx. 15 min. After that,
1 person is able to extract posts quickly, safely, and
without any problems without using a truck crane
and post extractor. With a feed of 1.9 m from the
front edge chain to the centre of hammer and a
useful height of 3 m even big posts can be rammed
easily.
Fig. Drilling Unit
Fig. Extractor unit
Hydraulic ram unit for piling posts
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
Due to the chain pressure mount, the
hammer will be pushed onto the post at a
preset pressure with a small hammer
weight of the hammer. Therefore the
ramming time is much shorter.
In order to achieve an even ramming
depth, the HRE has been equipped with an
electric cutoff. It switches off the rammer
and chain feed automatically with the
required ramming depth.
The big switch cabinet includes
all fuses and relays as well as
enough room for the
connection of other
consumers.
In order to minimise downtimes, only
screwings and hoses of best possible
quality have been chosen. If
nevertheless a hose is defective, it
may be procured at any hydraulic
point of support immediately.
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
HRE 500
PB 160 PB 310
Transportlength with Mastl. 3,70m: 4000 mm 4000 mm
Transportbreath: 1750 mm 1750 mm
Transport height: 2050 mm 2050 mm
Weight with hammer 1.800 kg 1.900 kg
Max.L of the posts to be rammed 3 m 3 m
Number of impacts/min 670-1450 min¹ 530 - 1150 min¹
Joule: 770 850
Weight of the hammer 76 kg 136 kg
Oil pressure /bar: 190 190
Oil quantity l/min: 80l min¹ 80l min¹
Oil tank / Menge l: 180 l 180 l
Motor: Hatz 2L 41C Hatz 2L 41C
Power / kw: 24,4 24,4
Elektric / V: 12 12
Tank capacity / l: 60 60
Technical Data
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
HRE 800 HRE 1000 HRE 3000
PB 160 PB 160 PB 310 PB 160 PB 310
Transportlength with Mastl. 3,70m: xxx 3750 mm 3750 mm 3750 mm 3750 mm
Transportlength with Mastl. 4,70m: xxx 4750 mm 4750 mm 4750 mm 4750 mm
Transportlength: 3000 mm
Transportbreath: 2000 mm 2000 mm 2000 mm 2000 mm 2000 mm
Transportheight: 2200 mm 2200 mm 2200 mm 2200 mm 2200 mm
Weight with hammer 2.800 kg 3.100 kg 3.600 kg 3.160 kg 3.660 kg
Max.L of the posts to be rammed 2 m 3 m / opt. 4 m 3 m / opt. 4 m 3 m / opt. 4 m 3 m / opt. 4 m
Feed of front edge chain
to center of posts 1.400 mm 1.900 mm 1.900 mm 1.900 mm 1.900 mm
Number of impacts /min 670 - 1450 670 - 1450 530 - 1150 670 - 1450 530 - 1150
Joule: 770 770 850 770 850
Weight of the hammer 76 kg 76 kg 136 kg 76 kg 136 kg
Oil pressure / bar: 190 190 190 190 190
Oil quantity l/min: 80l min¹ 80l min¹ 80l min¹ 80l min¹ 80l min¹
Oil tank / Quantity l: 180 l 180 l 180 l 180 l 180 l
Motor: Hatz 2L 41C Hatz 2L 41C Hatz 2L 41C Hatz 3L 41C Hatz 3L 41C
Power / kw: 24,4 24,4 24,4 34 34
Elektric / V: 12 12 12 12 12
Tank capacity / l: 60 60 60 60 60
Technical Data
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
HRE 4000 HRE 6000
PB 420 PB 420
Transportlength with Mastl. 3,70m: xxx xxx
Transportlength with Mastl. 4,70m: 5000 mm xxx
Transportlength xxx 6400 mm
Transportbreath: 2000 mm 2100 mm
Transport height: 2500 mm 2500 mm
Weight with hammer 3.800 kg 7.000 kg
Max.L of the posts to be rammed 3 m / opt. 4 m 6 m
Feed of front edge chain
to center of posts 1.900 mm 1.900 mm
Number of impacts/min 530 - 1150 530 - 1150
Joule: 1100 1100
Weight of the hammer 189 kg 189 kg
Oil pressure /bar: 190 190
Oil quantity l/min: 100l min¹ 100l min¹
Oil tank / Menge l: 180l 180l
Motor: Hatz 3L 41C Hatz 3L 41C
Power / kw: 34 34
Elektric / V: 12 12
Tank capacity / l: 60 60
Technical Data
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
Optionally the HBE 1000 tracked drill carriage may be equipped with a hydraulic dust extraction unit.
The dust extraction unit has the advantage that the entire drillings are sucked off the bore and
collected in a container. Therefore there will be no dust at the bore and the machine and operator
work in a “dust-free” area. After drilling the dust extractor is switched from “suction” to „emptying“ so
that the collected drillings are led for example into a wheelbarrow or similar which has been placed
underneath. At the same time, the filter are cleaned automatically with extraction of the dust
Technical Data:
Drilling depth : approx.1500mm
Drilling diameter
with 4“ hammer : 115mm-205mm
Feed from front edge chain
to centre bore : 1800mm
Torque turn drive approx.1000Nm
Number of impacts in-hole hammer
at 6 bar 1400 1/min
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
Equipment
Drilling screw Rotary Foundation In-hole-hammer
Drill bits No Skive hose
GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim
Driving caps
Post guides
Beacon light
Vario 100-140 Vario 140-200
Work lights grown