HYDRAULIC PISTON PUMPS

www.JameswayFarmEq.com

Models for every Need...The Jamesway family of Hydraulic Piston Pumps includes models designed for every type of manure and a wide range of accessories to suit every job. The low energy requirements and low maintenance needs make these pumps your first choice for simple and efficient transfer of manure from barn to storage. With few moving parts, these proven performers stand up to long hours of use in all sizes of operations, including manure separators and digester systems.

These self-contained pumps are easy to install and Jamesway’s planners will help you design your system. Selecting the right pump and the right fittings from the extensive range of accessories will guarantee a professional quality installation.

www.JameswayFarmEq.com

solid-TraNs PisToN PuMPThe Jamesway SOLID-TRANS Piston Pump transfers bedded manure long distances with only a 7.5 HP motor. The powerful knife gates make the SOLID-TRANS the best choice for tie-stall barns or for freestall barns that may have long bedding, hay or pen pack mixed into the manure.

The SOLID-TRANS Piston Pump may be installed in a dry pit or may be half-buried with a shallow pit providing service access.

Manure is transferred to storage through 16” steel or PVC pipe.

The 5”x 48” hydraulic cylinder provides plenty of pumping pressure.

SuctionStroke

PressureStroke

Choose either manual or hydraulic safety gate.

Choose from a wide range of hoppers to suit your installation.

Bedded manure passes easily through the 20” round inlet tube.

The heavy knife gates power through the toughest bedding.

Pipe access port is standard.

How iT works...

seMi-TraNs PisToN PuMPThe Jamesway SEMI-TRANS Piston Pump transfers semi-solid manures with short bedding from barn to storage. The SEMI-TRANS is the pump of choice for sand-bedded barns, with the heavy construction and extra durability needed to handle these tough conditions.

The SEMI-TRANS Pump can be mounted in a dry pit with a suction pipe extending into a reception pit when working with flowable manure. Construction is easy, with the wet pit and dry pit floors on the same elevation.

The full width service doors provide easy access to the flapper doors.

Choose manual or hydraulic service gates.

Powerful 5” hydraulic cylinder.

Choose 12.75” or 16” discharge pipe.

The hopper inlet model of SEMI-TRANS accepts a wide range of manure types, including non-flowable manure.

How iT works...SuctionStroke

Inlet pipe facing down for sand bedding

Inlet pipe facing up for organic bedding

PressureStroke

www.JameswayFarmEq.com

liqui-TraNs PisToN PuMPThe Jamesway LIQUI-TRANS Piston Pump sits high and dry at floor level while pulling manure from the reception pit through the 8” steel suction pipe. The compact size and easy floor mounting makes planning simple and works well in smaller manure rooms.

The LIQUI-TRANS Piston Pump transfers liquid manure and manure slurry from barn to storage through 6” or 8” PVC pipe. The ability to handle thicker and lumpier materials than is possible with centrifugal pumps makes the LIQUI-TRANS a great choice in barns where the manure consistency may vary.

The simplicity and reliability of the LIQUI-TRANS are important in applications such as manure separators or digester loading, where long running hours are the norm. The large inlet pipe makes the LIQUI-TRANS difficult to block, a key quality in automated systems.

Urethane flapper door seals.

20” diameter stainless steel pump chamber with 4” hydraulic cylinder.

6” output gate valve

Heavy-wall 8” steel suction pipe.

When feeding separators, you can control the manure discharge rate using the optional hydraulic flow divider on the power unit.

Requiring only a 5 or 7.5 HP motor, the LIQUI-TRANS pump is able to transfer manure long distances, even with single-phase power.

How iT works...SuctionStroke

PressureStroke

aCCessories Every installation needs the right accessories to ensure safe, trouble-free operation of your Jamesway piston pump.

With nine models of hydraulic power unit, Jamesway can match the right choice to every job. The hydraulic pump is C-face mounted to guarantee perfect shaft alignment, whether choosing 5, 7½ or 10 HP motor.

The Jamesway Electric Prop-Agitator is frequently used with Liqui-Trans pumps for chopping bedding or homogenizing manure in the reception pit.

This hydraulic-powered unit rotates to prevent bedding material from blocking the Liqui-Trans inlet pipe.

The Jamesway Hydraulic Unit motor starter includes a monitor to automatically stop the system in case of high oil temperature. These starters are also Ready-For-Signal models, designed to work with other Jamesway controls, including Scraper-Boss control, Liquid-Level control, Timer module, Float module, etc.

ProP-aGiTaTor

HydrauliC Power uNiT

iNleT CleaNerCoNTrols

www.JameswayFarmEq.com

PiPes & fiTTiNGsMatching the correct size and quality of pipe to the application is critical. Jamesway manufactures fittings and adapters for a wide range of pipes.

Jamesway clamp kits prevent pipe joints from separating. These are strongly recommended for transfer of heavily bedded/solid manure and for any pipe where airflushing will be employed.

Air flushing is a method of preventing sediment accumulation in pipes and is a normal maintenance when transferring sand-laden manure. A large volume of high-pressure air is discharged into the pipe, causing the manure load to push forward and scour the pipe clean.

Air flush riser pipes are placed at the pump outlet and intermittently along the pipe.

Outlet gate valves must be closed to prevent backflow anytime the pump is not running. Additional gate or flapper valves may be added to allow easy service or as additional protection.

SOLID-TRANS: 16” OD steel (Jamesway) 16” DR26 PVC (16.0” OD) 16” DR25 PVC (17.4” OD)

SEMI-TRANS: 12” DR26 PVC (12.75” OD) 12” DR25 PVC (13.2” OD) 16” DR26 PVC (16.0” OD) 16” DR25 PVC (17.4” OD)

LIQUI-TRANS: 6” SCHED 40 PVC (6.625” OD) 6” SCHED 80 PVC (6.625” OD) 8” SCHED 40 PVC (8.625” OD) 8” SCHED 80 PVC (8.625” OD)

12” & 16” SAFETY VALVES

6” & 8” FITTINGS

sTeel & PvC siZes

air flusHiNG kiTs safeTy valves

8” Riser BasePVC Adapter Wall Flange

Elbow

UndergroundGate Valve

Pipe Exit Flapper Valve

Underground Safety Valve

Pump Transition with safety valve and air flushing base

16” Riser Base

www.JameswayFarmEq.com

DEALER:

MANURE SYSTEMS:• AlleyScrapers• VerticalElectricPumps• ElectricPropAgitator• VerticalPTOPumps• PistonTransferPumps• CrossGutterSystems• BarnCleaners

MANURE APPLICATION:• Non-steerspreadertanks• Steerablespreadertanks• InjectionSystems• TruckMountTankers• LagoonPumps• PropAgitators• Loadingpumps

FEEDING SYSTEMS:• SiloUnloaders

• Feeders

• Conveyors

• PowerFeedCarts

• BeddingChopper

Visit our website for more information on these Jamesway products!Jamesway Farm Equipment products are designed in conformance to ASAE Standards S354.4 “Safety for Farmstead Equipment” and S318.15 “Safety for Agricultural Equipment”. Some photos in this brochure have safety shields removed or open to show additional detail on equipment features. Never operate equipment without safety shields in place. Jamesway continually updates and improves products and reserves the right to make changes in the design, specifications, and to add improvements to our products, without incurring an obligation on equipment purchased.

JAMESWAY FARM EQUIPMENT, INC. 12Route249St.Francois-Xavier(Quebec)JOB2V0Tele:(819)845-7824Fax:(819)845-5153

JAMESWAY FARM EQUIPMENT, INC. USAWarehouse15383StateHwy.131Tomah,WI54660

sHuTTle-sTroke GuTTerThe Jamesway Shuttle-Stroke hydraulic gutter cleaner is a perfect fit, able to run off the same power unit with any of the hydraulic piston pumps. Operates at full speed for transfer into reception pits or use the variable speed control to match the pump capacity when transferring into hopper-fed pumps. The Jamesway Shuttle-Stroke is available in several widths for use either as a cross collection gutter in freestall barns or as a barn cleaner in tie-stall barns.