HVAC Controls

Constant Volume AHU Controller W775074-2956 Specification Data

Proven PID space temperature control algorithmIntegral or packaged economizer controlSeparate intelligent recovery rates for heating and coolingDemand limit control temperature setpoint in energy saving directionLonMark profile 8030

W7750A Constant Volume AHU ControllerInputs

1 T7770 wall module1 resistive input2 dry contact digital inputs1 bypass button input

Outputs6 relay outputs1 LED output

W7750B/C Constant Volume AHU ControllerInputs

1 T7770 wall module4 resistive inputs2 voltage inputs4 dry contact digital inputs1 bypass button input

Outputs8 triac outputs (W7750B)1 LED output5 triac and 3 analog outputs (W7750C)

VAV Box Controller W775174-2942 Specification Data74-2953 Specification Data

Pressure-independent or pressure-dependent VAV box controlSingle-duct/dual-duct VAV box control solutionsReheat and peripheral radiation control (selectable "first on" sequencing)Series/parallel fanSupply/return air trackingLonMark functional profile 8010

W7751HInputs

1T7770 wall module1 resistive input1 voltage input1 bypass button input

Outputs4 triac outputs1 LED outputIntegrated actuator

W7751B, D, F1 Expanded input/output capacity actuator not included

Inputs1 T7770 wall module2 resistive inputs1 voltage input3 dry contact inputs1 bypass button input

Outputs8 triac outputs1 LED output

Unit Ventilator Controller W7753A74-2962 Specification Data

Space or return air temperature controlASHRAE cycles 1, 2, 38 output for HVAC controlPWM or floating damper controlLonMark functional profile 8080

Inputs1 T7770 wall module2 resistive inputs2 voltage/current inputs4 dry contact digital inputs1 bypass button input

Outputs8 triac outputs1 LED output

Fan Coil Unit Controller W775274-2959 Specification Data

2 pipe, 4 pipe fan coil unit controlUp to 3 speed fan controlWith or without electrical reheatSpace freeze protectionLonMark functional profile 8020

Inputs1 T7770 wall module1 dry contact digital input1 bypass button input

Outputs3 relay outputs1 LED output1 electric heat relay (F type only)

Remote Input/Output Device W7761A74-2698 Specification Data

Generic I/O for lighting, exhaust fans, pumps, and more LonMark standard objects for sensors and actuators

Inputs4 resistive inputs2 voltage inputs4 dry contact digital inputs

Outputs8 triac outputs

Communicating Thermostat T735063-1299 Specification Data

For single zone rooftop units, split systems, heat pumps or hot/chilled water systems.Two occupied and two unoccupied periods per day.Individual heat and cool setpoints available for occupied and not occupied periods.P+I+D control minimizes temperature fluctuations.7-day programmingRemote sensor capability for temperature (including outdoor air and dis-charge air) and humidity sensors.Auxiliary contact available for use with economizer or dehumidification system.Conforms to LonMark Space Comfort Profile for rooftop applications.

Hydronic Controller W7762B/7763C74-2934 Specification Data

Radiators, induction units, chilled ceilings and fan coil units with manual fan switching High efficiency, low cost heat/cool valve application solution Model with integrated or remote module for wall or unit mountedLonMark functional profile 8020

Inputs1 space temperature sensor (either built in or via T7770 wall module)1 dry contact digital input

Outputs1 relay output4 triac outputs

•••••

••••

••

•••••

•••

••••••

••••

•••

•

•••••

••

•••••

•••••

••

•••••

•••

•••

•

•••

•

•

••

•••

•

•

•

•••

••

••

LON

LON

LON

PRODUCT FEATURESCP-2xx family of NiagaraAX controllers give onboard IO and access to a single MSTP bus and / or a single LON bus which can be used to add additional distributed IO con-trollers. The controller is designed for DIN rail mounting and has removable screw connector terminals.

•

ComfortPoint Niagara Plant Controller Solution

ComfortPointNative BACnet Solution

PRODUCT FEATURESComfortPointTM

Specification Data SL-53-1092Supports BACnet Client and Server Operator Work Stations (OWS)Network connectivity configurations supported include BACnet IP Router, BACnet Controller, Gateway, and Web ServerUtilizes BTL listed, BACnet “Native”, Advanced Application Controllers (AAC)Each controller functions as a Master on BACnet, MS/TP LAN for Peer-to-Peer communicationControllers support the following functionality: Universal Inputs and Outputs (varies by model), 10 Program Objects (fully programmable), PID loop objects (Qty varies by model), 40 Analog and 40 Binary value objects, 8 Schedule objects, 3 Calendar objects, Intrinsic Alarm reporting, 8 Notification Class objects, 8 Trend objects (256 samples each), Standard Applications and Fully Programmable Control using the ComfortPoint Programming Tool

••

•••

BACnet Router/Controller/Gateway & Web Server CP-545-AX and CP-403-AX85-3038 Specification Data (CP-403-AX)85-3037 Specification Data (CP-545-AX)CP-403-AX

1 each LON FTT10A port, I/O: 6 universal inputs and 4 digital relay outputs, 1 each RS-485 port (BACnet MS/TP); 1 each RS-232 port, Web User Interface (option); supports up to 27 each field devices. CP-403-EXP-AX supports up to 120 LON or 30 each BACnet “Native” devices (limited by controller resources available).

CP-545-AX1 each LON FTT10A port, 4 each RS-485 ports (BACnet MS/TP); 2 each RS-232 ports, Web User Interface (option). Supports up to 120 LON devices and up to 30 each BACnet “Native” devices per RS-485 port (limited by controller resources available).

•

•

BACn

et M

S/TP

Bus

CP-7001 & CP-7051: Advanced Application Controller for VAV Terminal UnitsSpecification Data 85-3013

UL 916; BTL listed; I/O: 3 universal inputs, 3 universal outputsMeets Standard VAV Terminal Unit Control SequencesCP-7001: 18 deg/Minute actuatorCP-7051: 60 deg/Minute actuator

CP-7003 and CP-7053 Advanced Application Controller for VAV Fan Induction UnitsSpecification Data 85-3014

UL 916; BTL listedI/O: 3 Universal Inputs, 1 Universal Output, 1 Optically Isolated Triac Output, 1 NO Relay ContactCompatible with CP-1161 and CP-1181 Net Sensors, and CP-6000 Series SensorsCP-7003 18 degrees per minuteCP-7053 60 degrees per minute

CP-7301 and CP-7301C Advanced Application Controller for Air Handler UnitsSpecification Data 85-3015

UL 916; BTL listedI/O: 4 Universal Inputs, 3 Universal OutputsCompatible with CP-1161 and CP-1181 Net SensorsCP-7301C equipped with real-time clockCP-7301 without real-time clock

CP-7302 and CP-7302C Advanced Application Controller for Roof Top UnitsSpecification Data 85-3016

UL 916; BTL listedI/O: 4 Universal Inputs, 1 Universal Output, 1 Optically Isolated Triac Output, 2 Dual-Stage Traic OutputsCompatible with CP-1161 and CP-1181 Net Sensors

CP-7401 and CP-7401C Advanced Application Controller for Heat Pump UnitsSpecification Data 85-3017

UL 916; BT L listedI/O: 4 Universal Inputs, 4 Optically Isolated Triac OutputsCompatible with CP-1161 and CP-1181 Net SensorsCP-7401C equipped with real-time clockCP-7401 without real-time clock

CP-5801 and CP-5802 Advanced Application Controller for Direct Digital ControlSpecification Data 85-3011

UL 916; BTL listedI/O: 8 Universal Inputs, 8 Universal OutputsSupports up to 8 output override cards:

HPO-6701 Triac OutputHPO-6702 Short protected analog outputHPO-6703 Relay, NO contactsHPO-6704 4-20 mA current loopHPO-6705 Relay, NC contacts

Compatible with CP-1161 and CP-1181 Net SensorsCP-5801 equipped with real-time clockCP-5802 without real-time clock

CP-5831 Advanced Application Controller for Direct Digital ControlSpecification Data 85-3012

UL 916; BTL listedI/O: 16 Universal Inputs, 12 Universal OutputsSupports up to 12 output override cards:

HPO-6701 Triac OutputHPO-6702 Short protected analog outputHPO-6703 Relay, NO contactsHPO-6704 4-20 mA current loopHPO-6705 Relay, NC contacts

Compatible with CP-1161 and CP-1181 Net Sensors

ComfortPoint Controller Room Sensor OptionsNetSensor with LCD displayCP-1161 & CP-1181Specification Data 85-3019

Room temperature monitoring and controlNine function keys with seven user programmablePre-fabricated, quick-connect cables in 25, 50 and 75 foot lengthsCP-1181 includes humidity sensor

CP-6000 Series Sensors Specification Data 85-3021

Room temperatureOptions include: temperature setpoint adjust, override, override indicator, LCD display, and BACnet MS/TP portPrefabricated sensor cables in 25, 50, and 75 foot lengths supported on some models

•••••

••

•••

•••••

••

•

•••••

•••

–––––

•••

•••

–––––

•

••••

••

•

CP-403-AX or CP-545-AX

PRODUCT FEATURESUses Honeywell XL10 family of controllers.Controllers use LonWorks based Open Communications Protocol - the Worldwide standard in building control - so you can expect smooth, efficient interoperability between devices.Stand Alone operation at the field control bus level for maximum performance and reliability.Free topology transceiver technology simplifies wiring, uses standard network tools.ComfortPoint Programming Tool (CPT) contains configuration wizards to simplify setup and operation of XL10 controllers. Specification Data Sheet SL-85-3040

••

•

••

ComfortPoint LonWorks Solution

ComfortPoint system shown is representative of supported solutions. Additional products, software options, and interfaces may be necessary for a given solution. Contact Honeywell Building Solutions for more information. 1-800-345-6770, ext.612

CP-201 Niagara Based Controller1 x MSTP port and optional 1 x LonWorks port85-3020 Specification Data

LON, LonWorks, LonMark are registered trademarks of Echelon Corporation.

Distributed Input/Output Accessories1 XFR522

Module Type: ...................................... Manual override for XFL522Manual OverrideSwitches: ........................................... 8

2 XFR524 Module Type: ...................................... Manual override for XFL524Manual OverrideSwitches: ........................................... 6

3 XSL511 Module Type: ...................................... Connector module for XFL521,

XFL522, XFL523, XFL5244 XSL512

Module Type: ...................................... Manual disconnect module between terminals and I/O modules

5 XSL513 Module Type: ...................................... Terminal block for XFL521/522/523

6 XSL513 Module Type: ...................................... Terminal block for XFL524

Smart I/O Module74-3671 Specification DataXFC3A06001

Terminals: .......................................... Fixed permanentDigital Inputs: ..................................... 4Digital Outputs: ................................... 4Analog Inputs: .................................... 4 (20K NTC)Analog Outputs: .................................. 2 (VDC)

XFC3D06001Terminals: .......................................... RemovableManual Override: ................................ 6No. of LEDs: ....................................... 10Digital Inputs: ..................................... 4Digital Outputs: ................................... 4Analog Inputs: .................................... 4 (20K NTC)Analog Outputs: .................................. 2 (VDC)

CP-UL6438 – Programmable Unitary Controller

6 Universal Inputs4 Digital Inputs3 Analog Outputs8 Digital Outputs

••••

Coming soon Q3 2007

Coming soon Q3 2007

IO-16-H Optional Onboard I/O for CP-201 & CP-600

8 Universal Inputs4 Form A Relay Outputs4 0-10V DC Analog Outputs

IO-34-H Optional Onboard I/O for CP-201 & CP-600

16 Universal Inputs10 Form A Relay Outputs8 0-10V DC Analog Outputs1 onboard 24V AC/DC Power Supply

Maximum Configuration per CP-201 is 1 x IO-34 and 2 x IO-16’s

•••

••••

CP-403-AX or CP-545-AX

CP-600 Niagara Based Controller1 or 2 MSTP port(s) and optional 1 x LonWorks portIBM PowerPC 440 250 MHz processor128MB DDR RAM & 128 MB Serial FlashOptional 256 MB DDR RAMBattery BackupReal-time clock

••••••

PRODUCT FEATURESFreely Programmable with Graphical Function Block EnvironmentRemovable Terminal StripsColor Coded Input/Output labelsInternal Real-Time ClockInternal DC Power Supply

•••••

CP-201 or CP-600

CP-201 or CP-600

CP-VL6438N – Programmable VAV Controller

6 Universal Inputs4 Digital Inputs3 Analog Outputs8 Digital Outputs

••••

CP-VL6436A – Programmable VAV Controller with Actuator

6 Universal Inputs4 Digital Inputs3 Analog Outputs6 Digital Outputs

••••

BACnet is a registered trademark of the American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc (ASHRAE)

BTL is a registered trademark of BACnet International (BI)

NiagaraAX is a trademark of

3rd Party BACnet Clients

TCP/IP LAN, WAN, Internet & Intranet BACnet IP or Ethernet

ComfortPoint CP-Supervisor or EBI-Honeywell Building Manager (HBM)CP-Supervisor Specification Data 85-3039EBI-HBM Specification Data SL-54-1526

Network server for connected CP-AX controllersWorkstation for database and alarm management, and messaging servicesMonitor, control, schedule, and provide reporting and database synchronization for multiple CP-AX controllersUser access via standard web browserCP-Supervisor and Honeywell Building Manager for CP system supported on local Ethernet, or the Internet.

••

•

••

ComfortPoint Browser Station

Honeywell ComfortPoint™ Control System

Printed in the USA on recycled paper containing 10% post consumer waste.

77-2149May 2007© 2007 Honeywell International Inc.