HUAYRA CLOUD Version 1.0

USER MANUAL

THE END OF WATCHING

www.myhuayra.com 2015 All rights reserved Huayra Cloud

CONTENTS 

1. Huayra  2 

2. System  3 

3. Storage  4 

3.1 Se ng up Storage 4

3.2 Removing Storage 5

3.3 Storage proper es 5

3.4 Storage repair 6

4. Volume  7 

4.1 Volume Na ve 7

4.2 Volume Sta c 10

4.3 Volume Dynamic 13

5. Array  21 

6. Synchroniza on  26 

6.1 Real‐ me sync 26

6.2 Sync on demand 28

7. Encryp on  31 

8. Libraries  33 

 

5.1 Striping 22

5.2 Mirroring 23

5.3 Moun ng Storage 24

4.4 Dele ng a Volume 19

4.5 Volume proper es 20

2

1. Huayra

Meet Huayra. It is a perfect solution for anyone interested in cloud storage of data in a safe and convenient

manner. Yet, Huayra is not a cloud - it is a system that offers user cloud management among its various functions.

Our goal is to prevent online surveillance, and we pursue this goal through complex protection systems. Huayra is

independent of cloud operators and other institutions, and we are not bound by any contract with any of them. As an

independent system, we offer unrestricted security and confidentiality. We do not store, access or provide our users'

passwords. Therefore, we do not offer password reminder options; however, you can save your password on your

local machine. When you use Huayra, you can rest assured that your data will be accessible for you only. We do not

have tools for viewing your data or disclosing your data to any third parties. Your data is stored securely on one or

more accounts with various cloud operators. You can additionally encrypt your data with one or two encryption

algorithms. We implement the most secure encryption algorithms such as: Blowfish, Twofish, Serpent, Rijndael, each

with maximum encryption key. We are going to deploy new encryption algorithm according to future development of

IT systems and encryption solutions. According to your specific configuration, you can use single, double or no

encryption of your data.

Because data in cloud storage may differ in terms of importance for the owner, you can encrypt all your data

or single folders only. Encryption is not the only data security solution in Huayra; we also offer striping and mirroring

methods. In the striping process, files are sectioned into parts, encrypted and transferred in this form to various user

clouds. Therefore, in the event of hacker attack, such files cannot be combined and read. High speed transfer is an

added advantage. With mirroring, files are stored in redundant layout in two or more clouds. With this method, user

files are secure even in case of failure or shutdown of one of the clouds. If you use more than one cloud, you can

now be able to experience them from a single point of access with Huayra. Log in once to access all your clouds and

use them conveniently through a single application. The comfort of using Huayra is also due to the implemented

synchronization mechanisms. We use multipoint synchronization for synchronizing selected folders in a flexible

manner. You can also choose whether you are interested in sync on demand, activated at any time, or real-time

synchronization. In addition to all these benefits, Huayra has been created to facilitate usage for any user; this is why

the system interface is intuitive and transactions are executed in a natural way.

Thank you for your choice. Have a great time using our product. Huayra Team

3

2. System It is reasonable to understand the structure of the system you use. The system is built on three components: Instance, Volume,

Storage.

Instance

Instance is responsible for gathering all data read and write information from clouds. Two types of Instances can be distinguished:

Local Server - for attachment of Volume Native, with all information stored on the user's local machine. Volumes attached to a Local Server are not replicated to other machines and must be mounted on each computer separately.

Global Server - for attachment of Volume Static and Volume Dynamic. Information is stored on an external server. Volumes attached to a Global Server are replicated to other machines.

Volume

Volume is a coherent and continuous space for file operations. A Volume is a logical element consisting of Arrays, determining the Volume structure, and Storages representing physical cloud spaces. Three types of Volumes can be distinguished:

Volume Native - for connecting user cloud in the same way as if the user was using the original cloud client. Offers synchronization involving original mechanisms provided by operators and file access from mobile devices using the original cloud client for mobile devices.

Volume Static - for connecting a single cloud. It offers encryption of files in selected folders and managing unencrypted files via original cloud clients on mobile devices. It also offers secure maintenance of sensitive files that should not be disclosed and require protection, as well as ordinary files used in accordance with standard hard drive storage provider's service

Volume Dynamic - provides the maximum level of safety. With a double encryption mechanism that implements various encryption algorithms and independent passwords. Files stored in Volume Dynamic will resist brute force decryption attempts. Extra protection of data is provided by background segmentation of files and saving them in different hard drive areas (striping) or, according to actual configuration, saving multiple copies of the same files in different disc spaces (mirroring).

- Striping: In the striping process, files are segmented and randomly transferred to all the user's clouds. This will significantly accelerate data transfer and prevent consolidation of file fragments in the event of attack at disc storage space provider. https://en.wikipedia.org/wiki/Data_striping - Mirroring: With mirroring, files are saved in multiple clouds simultaneously. The user may access his files even in case of failure or shutdown of one of the clouds. https://en.wikipedia.org/wiki/Disk_mirroring

Storage

Storage in the system is the physical disc storage space offered by cloud operator.

4

3. Storage

To start using the system, you need to set up Storages and work on them. Before you set up your Storage, choose the Instance for your Storage service. To do this, click the Storages tab, go to Instance and select Local Server or Global Server. Then choose the cloud provider and press Add.

3.1 Se ng up Storage

When you have made your selection, specify your account name with the selected service provider, enter your password and click Join.

The system will redirect your call for authentication to the selected cloud provider. Specify the required information and confirm. At that point, Huayra will retrieve the necessary keys to get access to the selected account in the provider's cloud.

After setting up the connection, you will get basic information about the name, capacity and used storage space. To add Storage, click Add.

.

5

After you have made your selection, confirm your decision and click Delete.

You can modify the name and description of your Storage at any time. To do this, select Storages and click Properties. To accept the changes, click Apply.

3.2 Removing Storage

To remove your Storage, enter the Storages tab, click the selected Storage and press Remove. You can remove Storage only provided that it is not linked to any Volume.

3.3 Storage proper es

Important! 

Removing your Storage from Huayra will not delete the files you have stored.

6

In case of authorization error, you can take this step again. Check Renew the cloud authorizations and click Next.

Repair procedure is the same as the mounting procedure specified in 4.1.

3.4 Storage repair

If any problems arise with your Storage, you can troubleshoot. Select the desired Storage and choose Repair.

The main cause of trouble is a key authorization issue; to renew authorization, follow the command below. However,

you may sometimes encounter problems with accessing your Storage that are caused by provider failure; we cannot

offer a remedy for such cases, you will just have to wait for the cloud provider to remedy the problem.

7

4.1 Volume Na ve

Volume is a coherent data write and read space.

4. Volume

To create Volume Native, start with choosing the Volumes tab, then go to Volume tab and click Create. Enter Volume name in the dialog (must be unique for the given instance), you can also add a description; choose Volume Instance -Local Server and the system will automatically indicate the available volume types, in this case Native. Click Next.

Protect your Volume with a password. Your password must be at least 8 characters long. If you choose Automatic Startup, you do not have to memorize your passwords; however, when you have chosen Manual Startup, you may be asked to provide your password. You can change your password at any time. Your password is used to encrypt your Volume identification information.

Note! 

You must have your Storage a ached to a Local Server instance.

8

Only one step to go - mount your Storage. To do this, choose the cloud operator, then choose the desired Storage from the list. Click Next.

You will get a confirmation with data of your selected Volume configuration. To create your Volume, click Create.

Choose Volume startup mode - with automatic mode, your Volume will be mounted with Huayra startup. With manual mode, you can mount your Volume at any time. You can use keyboard shortcuts to do this without starting Huayra Manager; in this case, to mount your volume, password demand can be enforced. In case of mounting with Huayra Manager, the system will complete the operation without calling for a password, despite that this option was selected. After choosing your option, click Next.

Important! 

A password request is a request for the password assigned to the Volume, and not

your user log‐in password.

Tip! 

If you cannot see your Storage on the list and you are sure your Storage has been

mounted, make sure it is mounted to a Local Server instance. Unfortunately, any

Storage moun ng error requires that such Storage be removed and re‐mounted to the

right instance.

9

Click Create to get Volume Native. To mount it, click Mount.

The figure below shows a mounted Volume Native; to unmount, click Unmount.

10

4.2 Volume Sta c

To create Volume Static, start with choosing the Volumes tab, then go to Volume tab and click Create. Enter Volume name in the dialog (must be unique for the given instance), you can also add a description; choose Volume Instance - Global Server and the system will automatically indicate the available volume types - select Static. Click Next.

Protect your Volume with a password. Your password must be at least 8 characters long. If you choose Automatic Startup, you do not have to memorize your passwords; however, when you have chosen Manual Startup, you may be asked to provide your password. You can change your password at any time. Your password is used to encrypt your Volume identification information.

Note! 

You must have your Storage a ached to a Global Server instance.

11

Only one step to go - mount your Storage. To do this, choose the cloud operator, then choose the desired Storage from the list. Click Next.

You will get a confirmation with data of your selected Volume configuration. To create your Volume, click Create.

Choose Volume startup mode - with automatic mode, your Volume will be mounted with Huayra startup. With manual mode, you can mount your Volume at any time. You can use keyboard shortcuts to do this without starting Huayra Manager; in this case, to mount your volume, password demand can be enforced for mounting your Volume. In case of mounting with Huayra Manager, the system will complete the operation without calling for a password, despite that this option was selected. After choosing your option, click Next.

Important! 

A password request is a request for the password assigned to the Volume, and not

your user log‐in password.

Tip! 

If you cannot see your Storage on the list and you are sure your Storage has been

mounted, make sure it is mounted to a Global Server instance. Unfortunately, any

Storage moun ng error requires that such Storage be removed and re‐mounted in the

right instance.

12

Click Create to get Volume Static. To mount it, click Mount.

The figure below shows a mounted Volume Native; to unmount, click Unmount.

13

4.3 Volume Dynamic

The next steps will show you how to set up Volume Dynamic, which will provide ultimate security for your data through double encryption, striping and mirroring.

To create Volume Dynamic, start with choosing the Volumes tab, then go to Volume tab and click Create. Enter Volume name in the dialog (must be unique for the given instance), you can also add a description; choose Volume Instance - Global Server and the system will automatically indicate the available volume types - select Dynamic. Click Next.

Then enter your password twice. Make sure the two passwords are identical. Your password must be at least 8 characters long. Then choose the security level: low, medium or high, and select the encryption algorithm.

For low security, your files will not be encrypted.

14

If you choose medium encryp on level, enter a security password

and choose the encryp on algorithm. The system will use your

password at the ini al phase of encryp on.

All files saved to the Volume will be encrypted.

If you choose high level of security, a password will be generated

automa cally when you click Generate.

All files saved to the Volume will be encrypted.

Tip! 

You do not have to memorize the password used to encrypt the files.

Adjust the encryp on level to your needs and click Next.

Then choose Volume startup mode. In automatic mode, your Volume will be mounted with Huayra system startup.

With manual mode, you can mount your Volume at any time. You can use keyboard shortcuts to do this without starting Huayra Manager; in this case, to mount your volume, password demand can be enforced. In case of mounting with Huayra Manager, the system will complete the operation without calling for a password, despite that this option was selected.

After choosing your option, click Next.

Important! 

A password request is a request for the password assigned to the Volume, and not

your user log‐in password.

15

You will get a confirmation with data of your selected Volume configuration. To create your Volume, click Create.

You will get a confirmation with data of your selected Volume configuration. To create your Volume, click Create.

Now choose additional security for your data. You can choose from the following two options:

Striping - files will be segmented and sent to different clouds.

Mirroring - files are saved to more than one cloud at the same time, to secure data in the event of failure of any of the clouds.

With Huayra, you can set up complex links between clouds. At that point, you will choose the primary data linking mechanism. You can extend it at any time, using the Array configuration tool described under Section 5.

Important! 

Try to schedule your Volume configura on in advance, as you will not

be able to change your configura on (without extension) and you will

have to set up a new Volume. Therefore, you will have to copy your

files to the Volume again.

Below is an example of a complex Volume architecture.

Note that through mixed types of links, you can achieve a

combina on of striping (files cannot be reconsolidated in case of

a ack at one of the clouds) and mirroring, thus increasing your

chance to recover your files in case of failure of one or more

providers.

16

In this way, you will obtain a raw Volume Dynamic, without any mounted Storages.

To configure your Dynamic Volume, you have to add Storages. Choose Arrays from the menu and click Root.

The system will open an Arrays configuration tool. To add Storages, choose Storages from the menu.

17

The system will display a dialog with Storages mounted in the Array (in this case: Root). Because your Volume is not configured, the list of mounted Storages is empty. Click Add.

Choose the desired Storage provider, select a specific Storage and click Attach.

Tip! 

You can a ach a selected Storage to one Array only.

In this way, you have attached your Storage to an Array Root working in striping mode. You can repeat this procedure many times, adding more storages to the selected Array.

In our example, we used two Storages from the same cloud provider. However, you can connect Storages from different providers, or a larger number of Storages. You can see a summary of total storage space available to the specified Array at the bottom. This is the end of our example configuration process; to confirm, click Apply.

Important! 

You cannot remove a ached Storages from your Volume; to use

these Storages again, you have to delete the Volume.

New Storages a ached to the Array will be forma ed at the me

of moun ng the Volume, and all files from the a ached Storages

will be deleted. Storages already in use will remain unaffected and

retain their contents.

18

Your Volume Dynamic is ready to use.

19

After you have made your selection, confirm your decision and click Delete.

Important! 

Volume dele on is irreversible. You cannot restore access to your files and folders

4.4 Dele ng a Volume

To delete a Volume, enter the Volumes tab, click the selected Volume and press Delete. Volume deletion will delete Volume, file and folder information from the database. It does not, however, physically delete the files and folders in disc storages.

20

4.5 Volume proper es

To change the properties of a Volume, go to the Volumes tab, click the selected Volume and press Properties.

Below is an example properties window for a Static type Volume.

Below is an example properties window for a Static type Volume. The properties window displays basic information related to the Volume; most parameters are specified in the section on setting up a Volume. For Volume Native and Static, the properties window will display an additional option of automatic synchronization of operations on the storage provider's website with Huayra.

21

5. Array Array is an element of Volume Dynamic. Due to its tree structure, you have to choose a parent item to add another item. In the example below, you will attach two Arrays to the main item - Root.

Start the configuration with choosing the Volume, click the Volumes menu, then choose the desired Volume (in this case: Dynamic); from Details menu, choose Array.

Then select the parent item (in our example: Root), which should be highlighted; choose Add.

Uwaga! 

Wszystkie operacje konfiguracyjne na Volume możemy przeprowadzać tylko gdy Volume jest odmontowany.

22

5.1 Striping

Choose Add to see a window for adding a new Array. Check the Array Owner field to make sure that you chose the right parent item, then choose the Array Type, striping or mirroring. Choose striping. Click Next.

You can specify a name for the new Array and a description. The system will prompt a default name, which you can leave as is. If you change the name, make sure that the name of a parent item you create must be unique. Click Next.

Finally, you will see the new Array configuration information; if everything conforms to the requirements, click Create

The structure shown below should appear in the main window:

23

5.2 Mirroring

Choose Add to see a window for adding a new Array. Check the Array Owner field to make sure that you chose the right parent item, then choose the Array Type, striping or mirroring. Choose mirroring. Click Next.

You can specify a name for the new Array and a description. The system will prompt a default name, which you can leave as is. If you change the name, make sure that the name of a parent item you create must be unique. Click Next.

Finally, you will see the new Array configuration information; if everything conforms to the requirements, click Create.

The structure shown below should appear in the main window:

24

5.3 Moun ng Storage

The figure below shows an Array without any attached Storages. To bind disc storages with an Array, click the selec-ted Array and choose Storages from the menu

The system will display a dialog with Storages mounted in the Array (in this case: Root). Because your Array does not contain any items, the list of mounted Storages is empty. Click Add.

Choose the desired Storage provider, select a specific Storage and click Attach.

Tip! 

You can a ach a selected Storage to one Array only.

25

In this way, you have attached your Storage to an Array Root working in striping mode. You can repeat this procedure many times, adding more storages to the selected Array.

In our example, we used two Storages from the same cloud provider. However, you can connect Storages from different providers, or a larger number of Storages. You can see a summary of total storage space available to the specified Array at the bottom This is the end of our example configuration process; to confirm, click Apply.

Important! 

You cannot remove a ached Storages from your Array; to use

these Storages again, you have to delete the Volume.

New Storages a ached to the Array will be forma ed at the me

of moun ng the Volume, and all files from the a ached Storages

will be deleted. Storages already in use will remain unaffected and

retain their contents.

The figure below shows an Array with attached Storages.

26

6. Synchroniza on 6.1 Real‐ me sync

To launch real-time sync, go to Synchronize tab, chose Realtime and click Create. Then enter a name and description of your synchronization. Click Next.

Select the folder you want to synchronize - click Browse. Check if you want to synchronize hidden folders. Select the desired directory in the local machine resources explorer window. Click Next.

Note! 

Name of your Synchroniza on must be unique.

Real-time synchronization continuously monitors any changes on your computer and in the Cloud. If any differences are discovered, the system will launch the synchronization process.

27

Choose a local folder, then choose a cloud folder. Click Browse to display a selection window such as the one below.

Choose the desired directory and click Next.

To confirm the selected synchronization, click Create.

You can cancel synchronization at any time; you have to confirm that you are sure before you cancel.

28

6.2 Sync on demand

To create synchronization on demand, enter the Synchronize tab, go to Demand and click Create.

Choose the Instance and Volume as the source of files for syn-chronization. Click Next.

Note! 

Name of your Synchroniza on must be unique.

With sync on demand, you can choose the time of synchronization. Sync on demand lets you link multiple folders to a single synchronization process.

Tip 

You can only synchronize folders from a single Volume in a single

sync on demand process.

29

You can then choose folders for synchronization - click Add.

In the next step, enter the name and description of your syn-chronization, and choose the folders you want to synchronize from your machine and from the Cloud space.

In this way, you created the first sync point. At this time, you can add another sync point, delete or edit an existing sync.

Sync points will appear in Synchronization Entries window when added.

When ready, click Next.

To create your synchronization, click Create.

30

You can delete synchronization of your choice at any ti-me. To do this, go to Synchronize tab, choose Demand, select your synchronization and click Delete.

.

31

When a folder icon is highlighted green, the folder is encrypted.

7. Encryp on Here, you will learn how to encrypt selected folders. To encrypt your folders, use the Clouds Explorer utility. Choose a folder from the left menu.

Enter Details for a specified folder.

Check Encrypt contents to secure data, enter a password and type of encryption.

Note! 

All files stored to an encrypted folder will be automa cally

encrypted. To encrypt exis ng files, choose Encrypt subitems

in the folder.

You can change your password at any me and you do not

have to memorize it; try to use strong passwords.

32

Encrypted folders are displayed green in Clouds Explorer. The encryption operation is inherited to all folders in the folder tree below the selected folder. In our example, Personal is the highlighted folder, and automatic encryption will be applied to Documents, Movies, Musics, Pictures, ... folders. .

To decrypt a folder, select the desired folder, go to Details and uncheck Encrypt contents to secure data.

A pop-up window will ask you to confirm. If you also want to decrypt the encrypted files in the selected folder, choose Decrypt subitems in the folder.

33

8. Libraries Libraries is a Clouds Explorer functionality that facilitates usage of multiple Volumes. Using Libraries, you can conso-lidate characteristic types of folders (Documents, Photos, Videos, etc.) from different Volumes at a single location.

First, define the types of libraries you want to use. To do this, select Libraries and click Details. In the pop-up dialog, go to Libraries tab, select the desired libraries, checking or unchecking Library Visible option. To confirm, click Apply

34

In the next step, specify the locations of folders from the given library. As an example, we will use the Documents library.

Select the Documents library, choose Details, go to Locations tab and choose Add.

Select a folder location for your documents and choose Join.

Your chosen location will be added to the library.

Default Location shows the default directory for a library.

Select MoveTo ro CopyTo in Cloud Explorer to make sure that files are copied to the specified folder.